Gabe Black
7c606e3835
X86: (Re)Implemented SHRD.
2009-08-07 10:13:33 -07:00
Gabe Black
4f5270f946
X86: Implement SHLD.
2009-08-07 10:13:24 -07:00
Gabe Black
3a55fc5cac
X86: Implement shift right/left double microops.
...
This is my best guess as far as what these should do. Other existing microops
use implicit registers, mul1s and mul1u for instance, so this should be ok.
The microop that loads the implicit DoubleBits register would fall into one
of the microop slots for moving to/from special registers.
2009-08-07 10:13:20 -07:00
Gabe Black
62a2e85c9a
X86: Make the qaud width bswap instruction handle the fact that 32 bit operations zero extend.
2009-08-07 10:12:58 -07:00
Gabe Black
0526f453aa
X86: Use the right field when using legacy prefixes to distinguish instructions.
2009-08-07 10:12:52 -07:00
Gabe Black
2daba26359
X86: Don't truncate the immediate parameter for the ENTER instruction.
2009-08-07 10:12:29 -07:00
Gabe Black
2e3446a410
X86: Adjust the various sizes used for the enter and leave instructions.
2009-08-06 21:44:42 -07:00
Gabe Black
c7b894a06f
X86: Make scas compare its operands in the right order.
2009-08-06 21:44:41 -07:00
Gabe Black
011c1865ad
X86: Fix a copy/paste error for cmovnp.
2009-08-06 21:44:40 -07:00
Derek Hower
dff7c9eaa0
merge
2009-08-05 14:23:32 -05:00
Derek Hower
867269bc96
regression: updated stats
2009-08-05 14:20:53 -05:00
Derek Hower
fbf7391bb0
ruby: configuration supports multiple runs in same session
...
These changes allow to run Ruby-gems multiple times from the same
ruby-lang script with different configurations
2009-08-05 14:20:32 -05:00
Derek Hower
1276df51e2
protocol: made MI_example dma mapping generic
2009-08-05 14:17:23 -05:00
Gabe Black
60d4a0f6d7
Merge with head.
2009-08-05 03:12:39 -07:00
Gabe Black
da2df2fc25
X86: Make conditional moves zero extend their 32 bit destinations always.
2009-08-05 03:07:55 -07:00
Gabe Black
b64d0bdeda
X86: Fix condition code setting for signed multiplies with negative results.
2009-08-05 03:07:01 -07:00
Gabe Black
2914a8eb16
X86: Make the check for negative operands for sign multiply more direct.
2009-08-05 03:06:37 -07:00
Gabe Black
e2e0ae576a
X86: Make sure immediate values are truncated properly.
...
Register values will be "picked" which will assure they don't have junk beyond
the part we're using. Immediate values don't go through a similar process, so
we should truncate them explicitly.
2009-08-05 03:06:01 -07:00
Gabe Black
ef3896d851
X86: Use the new forced folding mechanism for the SAHF and LAHF instructions.
2009-08-05 03:04:17 -07:00
Gabe Black
664d50b439
X86: Fix the indexing for ah in byte division instructions.
2009-08-05 03:03:41 -07:00
Gabe Black
abe8fb3844
X86: Fix the indexing for ah in byte multiply instructions.
2009-08-05 03:03:28 -07:00
Gabe Black
df1abc4412
X86: Let microops force folding an index into the high byte of a register.
2009-08-05 03:03:07 -07:00
Gabe Black
c4140d7d60
X86: Handle rotate left with carry instructions that go all the way around or more.
2009-08-05 03:02:28 -07:00
Gabe Black
3990445354
X86: Set the flags on rotate left with carry instructions.
2009-08-05 03:02:05 -07:00
Gabe Black
d265f7683e
X86: Handle rotate right with carry instructions that go all the way around or more.
2009-08-05 03:01:49 -07:00
Gabe Black
77dc6b33ee
X86: Fix the overflow bit for rotate right with carry.
2009-08-05 03:01:23 -07:00
Gabe Black
c8b1a4583e
X86: Fix the computation of the bottom part of rotate right with carry.
2009-08-05 03:01:07 -07:00
Gabe Black
bab4597fc5
X86: Fix the computation of the upper part of rotate right with carry.
2009-08-05 03:00:43 -07:00
Gabe Black
4e4adcaaa8
X86: Set the flags for rotate right with carry instructions.
2009-08-05 03:00:23 -07:00
Gabe Black
64d7948692
X86: Handle rotating right all the way around or more.
2009-08-05 03:00:03 -07:00
Gabe Black
88041f75c4
X86: Set the flags on a rotate right instruction.
2009-08-05 02:59:39 -07:00
Gabe Black
029d360db2
X86: Make shifts/rotations that write to 32 bits of a register zero extend.
2009-08-05 02:59:25 -07:00
Gabe Black
7f9a3af250
X86: Handle left rotations that go all the way around or more.
2009-08-05 02:58:54 -07:00
Gabe Black
99adfd9dae
X86: Actually set the flags on a rotate left instruction.
2009-08-05 02:58:20 -07:00
Gabe Black
c087b60af3
X86: Fix the sar carry flag.
2009-08-05 02:58:03 -07:00
Gabe Black
860f0f8350
X86: Fix sign extension when doing an arithmetic shift right by 0.
2009-08-05 02:57:47 -07:00
Gabe Black
a238959c34
X86: Fix the carry flag for shr.
2009-08-05 02:56:49 -07:00
Gabe Black
22a5f66820
X86: Fix the carry flag for shl.
2009-08-05 02:56:38 -07:00
Gabe Black
df2c862a07
X86: Fix how the parity flag is computed.
...
It's only for the lowest order byte, and I had the polarity wrong.
2009-08-05 02:56:12 -07:00
Derek Hower
7f012ef8da
ruby: made mapAddressToRange based off a bit count
2009-08-04 23:05:37 -05:00
Derek Hower
33b28fde7a
slicc: added MOESI_CMP_directory, DMA SequencerMsg, parameterized controllers
...
This changeset contains a lot of different changes that are too
mingled to separate. They are:
1. Added MOESI_CMP_directory
I made the changes necessary to bring back MOESI_CMP_directory,
including adding a DMA controller. I got rid of MOESI_CMP_directory_m
and made MOESI_CMP_directory use a memory controller. Added a new
configuration for two level protocols in general, and
MOESI_CMP_directory in particular.
2. DMA Sequencer uses a generic SequencerMsg
I will eventually make the cache Sequencer use this type as well. It
doesn't contain an offset field, just a physical address and a length.
MI_example has been updated to deal with this.
3. Parameterized Controllers
SLICC controllers can now take custom parameters to use for mapping,
latencies, etc. Currently, only int parameters are supported.
2009-08-04 12:52:52 -05:00
Derek Hower
c1e0bd1df4
slicc: generate html by default
2009-08-04 12:42:45 -05:00
Nathan Binkert
bd7af84d5e
slicc: better error messages when the python parser fails
2009-08-04 09:37:27 -07:00
Gabe Black
f5c21eaa1a
Merged with head.
2009-08-03 11:06:19 -07:00
Gabe Black
676dc6d292
X86: Fix segment override prefixes on instructions that use rbp/rsp and a displacement.
2009-08-03 11:01:40 -07:00
Derek Hower
ac15e42c17
Automated merge with ssh://hg@m5sim.org/m5
2009-08-03 11:39:08 -05:00
Gabe Black
38c2af17a5
X86: Set up the IDE device correctly, ie. with and using legacy ports.
2009-08-02 18:01:13 -07:00
Gabe Black
80aa771dbc
IDE: Configure the IDE control to reflect the initial value of the command register.
2009-08-02 18:01:09 -07:00
Gabe Black
aff57202b4
X86: Fix the high result of mul1s, and removed undefined shifts from the mult microops.
2009-08-02 08:39:29 -07:00
Steve Reinhardt
a13a706a20
Fix setting of INST_FETCH flag for O3 CPU.
...
It's still broken in inorder.
Also enhance DPRINTFs in cache and physical memory so we
can see more easily whether it's getting set or not.
2009-08-01 22:50:14 -07:00
