Adds a wrapper to the fix functions of the verifiers. This wrapper first
copies the original file to a backup file, then performs the fix. If an
error occurs, the backup file is used to restore the original file.
Also fixed a line-length error in verifiers.py
Factored out of the larger banked register change.
Change-Id: I947dbdb9c00b4678bea9d4f77b913b7014208690
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Updated according to GICv2 documentation.
Change-Id: I5d926d1abf665eecc43ff0f7d6e561e1ee1c390a
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Introduce and use a lookup table.
Using fetchDescriptor() rather than DMA cleanly handles nested paging.
Change-Id: I69ec762f176bd752ba1040890e731826b58d15a6
During host bootup, KVM reads/writes to CNTHCTL_EL2. Because this
miscreg has not been implemented, the simulation would end there. This
patch causes the simulation to warn about the read/write instead of fail.
Change-Id: If034bfd0818a9a5e50c5fe86609e945258c96fa3
This fixes a bug where stage 2 lookups used the AArch32
permissions rules even if we were executing in AArch64 mode.
Change-Id: Ia40758f0599667ca7ca15268bd3bf051342c24c1
This patch restricts trapping to hypervisor only if we are in the
correct exception level for the trap to happen.
Change-Id: I0a382b6a572ef835ea36d2702b8a81b633bd3df0
Faults that could potentially be routed to the hypervisor checked
whether or not they were in a secure state without checking if security
was enabled or not. This caused faults not to be routed correctly. This
patch causes secure state checking to first ask if security is enabled.
Change-Id: I179e9b181b27f552734c9bab2b18d05ac579a119
We recompute if we are doing a stage 2 walk inside of the table walker
but we have already figured it out in the tlb. Pass the information in
to the walk instead of recomputing it.
Change-Id: I39637ce99309b2ddbc30344d45ac9ebf6a203401
The functional case is already handled within the fetchDescriptor()
function. We can thus use that function for both atomic and functional
mode when we start the table walk.
Change-Id: Iacaed28cd9024d259fd37a58150efd00ff94d86e
This patch adds the option for faults to be routed to the hypervisor
using the pre-existing routeToHyp() functions that are present in each
fault type.
Change-Id: I9735512c094457636b9870456a5be5432288e004
During address translation instructions (such as AT S1E1R_Xt) the exception
level can be different than the current exception level. This patch fixes
how the TLB determines what EL to use during these instructions.
Change-Id: Ia9ce229404de9e284bc1f7479fd2c580efd55f8f
This patch adds the AArch64 instruction hvc which raises an exception
from EL1 into EL2. The host OS uses this instruction to world switch
into the guest.
Change-Id: I930ee43f4f0abd4b35a68eb2a72e44e3ea6570be
There are cases where we need to ignore files with specific extensions
(e.g., when Mercurial litters the file system with patch
rejects). Implement this functionality using a helper class
(FileIgnoreList) that supports both regular expressions and basic
string comparisons.
Change-Id: I34549754bd2e10ed230ffb2dc057403349f8fa78
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
An ARM big.LITTLE system consists of two cpu clusters: the big
CPUs are typically complex out-of-order cores and the little
CPUs are simpler in-order ones. The fs_bigLITTLE.py script
can run a full system simulation with various number of big
and little cores and cache hierarchy. The commit also includes
two example device tree files for booting Linux on the
bigLITTLE system.
Change-Id: I6396fb3b2d8f27049ccae49d8666d643b66c088b
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
The behavior of WFI is to cause minor to cease evaluating
pipeline logic until an interrupt is observed, however
a user may wish to drain the system while a core is sleeping
due to a WFI. This patch makes WFI drain. If an actual
drain occurs during a WFI, the CPU is already drained and will
immediately be ready for swapping, checkpointing, etc. This
should not negatively impact performance as WFI instructions
are 'stream-changing' (treated like unpredicted branches), so
all remaining instructions are wrong-path and will be squashed
rapidly.
Change-Id: I63833d5acb53d8dde78f9f0c9611de0ece385e45
This patch adds SMT support to the MinorCPU. Currently
RoundRobin or Random thread scheduling are supported.
Change-Id: I91faf39ff881af5918cca05051829fc6261f20e3
Make it so that getInterrupt *always* returns an interrupt if
checkInterrupts() returns true. This fixes/simplifies handling
of interrupts on the SMT FS CPUs (currently minor).
This patch adds a total() function to the Vector2D
stat type. Similar to other stats such as Scalar or
Vector it is useful to be able to read the total for
a given stat.
At the moment the SPARC FS machine configuration comes with a hardcoded
value for using the Solaris 10 disk image from the OpenSPARC tarball. The
--disk-image option is completely ignored for SPARC. This simple patch
modifies the behavior so that --disk-image option is both taken into
account and also required. This makes it possible to easily change SPARC FS
images without having to modify the configuration files.
This patch fixes a bug in etherswitch. When a packet gets inserted
in the output fifo, the txEvent has to always be reschedule,
not only when an event is already scheduled. This can raise
the assertion in the reschedule function.
Don't consult the TLB test interface for PA's returned by functional
translations by the AT instruction. We implement this by chaning the
ISA code to synthesize 0-length functional reads for the TLB lookup.
The TLB then bypasses the final PA check in the tester if the size is
zero.
Change-Id: I2487b7f829cea88c37e229e9fc7a4543aced961b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
The ELF loader currently has an assertion that checks if the size of a
loaded .text secion is non-zero. This is useful in the general case as
an empty text section normally indicates that there is something
strange with the ELF file. However, asserting isn't very useful. This
changeset converts the assert into a warning that tells the user that
something strange is happening.
Change-Id: I313e17847b50a0eca00f6bd00a54c610d626c0f0
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Currently garnet will not run due to double statistic registration of new
stats in ClockedObject. This occurs because a temporary array named 'cls'
is being added as a child to garnet internal and external link SimObjects.
This patch simply renames the temporary array which prevents it from
being added as a child object and avoids the assertion that a statistic
was already registered.
Committed by Jason Lowe-Power <jason@lowepower.com>
Sync DRAMPower to external tool
This patch syncs the DRAMPower library of gem5 to the external
one on github (https://github.com/ravenrd/DRAMPower) of which
I am a maintainer.
The version used is the commit:
902a00a1797c48a9df97ec88868f20e847680ae6
from 07. May. 2016.
Committed by Jason Lowe-Power <jason@lowepower.com>
This patch adds an example configuration for elastic trace playing into the
SystemC world, similar to the already existing traffic generator example in
/util/tlm.
Committed by Jason Lowe-Power <jason@lowepower.com>
This patch provides the example test script to configure different HMC
architecture and run traffic through traffic generator.
Committed by Jason Lowe-Power <jason@lowepower.com>
In this new hmc configuration we have used the existing components in gem5
mainly [SerialLink] [NoncoherentXbar]& [DRAMCtrl] to define 3 different
architecture for HMC.
Highlights
1- It explores 3 different HMC architectures
2- It creates 4-HMC crossbars and attaches 16 vault controllers with it.
This will connect vaults to serial links
3- From the previous version, HMCController with round robin funtionality
is being removed and all the serial links are being accessible directly
from user ports
4- Latency incorporated by HMCController (in previous version) is being
added to SerialLink
Committed by Jason Lowe-Power <jason@lowepower.com>
The style checker for spacing around control statements (ControlSpace)
and the whitespace checker (Whitespace) didn't refer to some of their
configuration variables correctly. This changeset fixes those issues.
Reported-by: Jason Lowe-Power <power.jg@gmail.com>
--HG--
extra : amend_source : 05d82d27d4c42aacd78b514d3ca35ca5744164bb
In previous versions of systemC-gem5 coupling statistics were not updated
for the systemc-gem5 simulation. systemC-gem5 simulation only need the
previously built config.ini file and normal gem5 simulation has to be run
once to generate config.ini file. Thus stats.txt inside the m5out folder is
redundant for systemC-gem5 simulation. A new stats file is now generated
with the all the statistics for systemC-gem5 simulation. This will also
resolve the stats issue in tlm-sysmtemC simulation.
Committed by Jason Lowe-Power <jason@lowepower.com>
This patch changes how the embedded swig code is loaded to ensure that
gem5 works with swig 3.0.9. For Python 2.7 and above, swig 3.0.9 now
relies on importlib, and actually looks in the appropriate packages,
even for the wrapped C code. However, the swig wrapper does not
explicitly place the module in the right package (it just calls
Py_InitModule), and we have to take explicit action to ensure that the
swig code can be loaded. This patch adds the information to the
generated wrappers and the appropriate calls to set the context as
part of the swig initialisation.
Previous versions of swig used to fall back on looking in the global
namespace for the wrappers (and still do for Python 2.6), but
technically things should not work without the functionality in this
patch.
Previously when we initialized the TLB we would allocate a number of
TLB entries which would be marked as valid. As a result the TLB
contained an entry which would be considered a valid entry for the 0
page.
Change-Id: I23ace86426a171a4f6200ebeb29ad57c21647036
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
The use of array tuples, requires an explicit include of the array library
Change-Id: I06730051777a97edf80e41a5604184b387b12239
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
The snoop filter handles requests in two steps which preceed and
follow the call to send the packet downstream. An address mapper could
possibly change the address of the packet when it is sent downstream
breaking the snoop filter assumption that the address is unchanged
Change-Id: Ib2db755e9ebef4f2f7c0169a46b1b11185ffbe79
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Add a "test" command to tests.py that queries a test pickle file and
returns different exit codes depending on the outcome of the tests in
the file. The following exit codes can currently be returned:
* 0: All tests were successful or skipped.
* 1: General fault in the script such as incorrect parameters or
failing to parse a pickle file.
* 2: At least one test failed to run. This is what the summary
formatter usually shows as a 'FAILED'.
* 3: All tests ran correctly, but at least one failed to verify
its output. When displaying test output using the summary
formatter, such a test would show up as 'CHANGED'.
The command can be invoked like this:
./tests/tests.py test `find build/ARM/tests/opt/ -name status.pickle`
Change-Id: I7e6bc661516f38ff08dfda7c4359a1e10bf97864
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
