This patch adds support for interleaving bits for the address
ranges. What was previously just a start and end address, now has an
additional three fields, for the high bit, and number of bits to use
for interleaving, and a match value to compare against. If the number
of interleaving bits is set to zero it is effectively disabled.
A number of convenience functions are added to the range to enquire
about the interleaving, its granularity and the number of stripes it
is part of.
This patch makes the all proxy traverse any potential list that is
encountered in the object hierarchy instead of only looking at
children that are SimObjects. An example of where this is useful is
when creating a multi-channel memory system as a list of controllers,
whilst ensuring that the memories are still visible in the system.
This patch cleans up the AddrRangeMap in preparation for the addition
of interleaving by removing unused code. The non-const editions of
find are never used, and hence the duplication is not needed.
This patch generalises the address range resolution for the I/O cache
and I/O bridge such that they do not assume a single memory. The patch
involves adding a parameter to the system which is then defined based
on the memories that are to be visible from the I/O subsystem, whether
behind a cache or a bridge.
The change is needed to allow interleaved memory controllers in the
system.
This patch tidies up a number of the bus DPRINTFs related to range
manipulation. In particular, it shifts the message about range changes
to the start of the member function, and also adds information about
when all ranges are received.
This patch makes the address mapper less stringent about checking the
before and after ranges, i.e. the original and remapped ranges. The
checks were not really necessary, and there are situations when the
previous checks were too strict.
This patch makes the start and end address private in a move to
prevent direct manipulation and matching of ranges based on these
fields. This is done so that a transition to ranges with interleaving
support is possible.
As a result of hiding the start and end, a number of member functions
are needed to perform the comparisons and manipulations that
previously took place directly on the members. An accessor function is
provided for the start address, and a function is added to test if an
address is within a range. As a result of the latter the != and ==
operator is also removed in favour of the member function. A member
function that returns a string representation is also created to allow
debug printing.
In general, this patch does not add any functionality, but it does
take us closer to a situation where interleaving (and more cleverness)
can be added under the bonnet without exposing it to the user. More on
that in a later patch.
This patch temporarily removes the joining of ranges when creating the
backing store, to reserve this functionality for the interleaved
ranges that are about to be introduced.
When creating the mmaps for the backing store, there is no point in
creating larger contigous chunks that what is necessary. The larger
chunks will only make life more difficult for the host.
Merging will be re-added later, but then only for interleaved ranges.
This patch adds support for reading input traces encoded using
protobuf according to what is done in the CommMonitor.
A follow-up patch adds a Python script that can be used to convert the
previously used ASCII traces to protobuf equivalents. The appropriate
regression input is updated as part of this patch.
The EIO tests depend on the EIO support from the "encumbered"
repository, which means that they are not normally built with
gem5. This causes all EIO related tests to fail, which is both
annoying and confusing. This patch addresses this by adding support
for skipping tests if certain conditions (e.g., the presence of a
SimObject) can not be met. It introduces the following Python
functions that can be called from within a test case:
* skip_test -- Skip a test and optionally print why the test was
skipped.
* has_sim_object -- Test if a SimObject exists.
* require_sim_object -- Test if a SimObject exists and skip, or
optionally fail, the test if not.
Additionally, this patch updates the EIO tests to check for the
presence of EioProcess.
This patch encapsulates the traffic generator input in a stream class
such that the parsing is not visible to the trace generator. The
change takes us one step closer to using protobuf-based input traces
for the trace replay.
The functionality of the current input stream is identical to what it
was, and the ASCII format remains the same for now.
This patch adds support for inputting protobuf messages through a
ProtoInputStream which hides the internal streams used by the
library. The stream is created based on the name of an input file and
optionally includes decompression using gzip.
The input stream will start by getting a magic number from the file,
and also verify that it matches with the expected value. Once opened,
messages can be read incrementally from the stream, returning
true/false until an error occurs or the end of the file is reached.
This patch adds packet tracing to the communication monitor using a
protobuf as the mechanism for creating the trace.
If no file is specified, then the tracing is disabled. If a file is
specified, then for every packet that is successfully sent, a protobuf
message is serialized to the file.
This patch adds support for outputting protobuf messages through a
ProtoOutputStream which hides the internal streams used by the
library. The stream is created based on the name of an output file and
optionally includes compression using gzip.
The output stream will start by putting a magic number in the file,
and then for every message that is serialized prepend the size such
that the stream can be written and read incrementally. At this point
this merely serves as a proof of concept.
This patch enables the use of protobuf input files in the build
process, thus allowing .proto files to be added to input. Each .proto
file is compiled using the protoc tool and the newly created C++
source is added to the list of sources.
The first location where the protobufs will be used is in the
capturing and replay of memory traces, involving the communication
monitor and the trace-generator state of the traffic generator. This
will follow in the next patch.
This patch does add a dependency on the availability of the BSD
licensed protobuf library (and headers), and the protobuf compiler,
protoc. These dependencies are checked in the SConstruct, similar to
e.g. swig. The user can override the use of protoc from the PATH by
specifying the PROTOC environment variable.
Although the dependency on libprotobuf and protoc might seem like a
big step, they add significant value to the project going
forward. Execution traces and other types of traces could easily be
added and parsers for C++ and Python are automatically generated. We
could also envision using protobufs for the checkpoints, description
of the traffic-generator behaviour etc. The sky is the limit. We could
also use the GzipOutputStream from the protobuf library instead of the
current GPL gzstream.
Currently, only the C++ source and header is generated. Going forward
we might want to add the Python output to support simple command-line
tools for displaying and editing the traces.
The PL111 model currently maintains a list of pre-allocated
DmaDoneEvents to prevent unnecessary heap allocations. This list
effectively works like a stack where the top element is the latest
scheduled event. When an event triggers, the top pointer is moved down
the stack. This obviously breaks since events usually retire from the
bottom (events don't necessarily have to retire in order), which
triggers the following assertion:
gem5.debug: build/ARM/dev/arm/pl111.cc:460: void Pl111::fillFifo(): \
Assertion `!dmaDoneEvent[dmaPendingNum-1].scheduled()' failed.
This changeset adds a vector listing the currently unused events. This
vector acts like a stack where the an element is popped off the stack
when a new event is needed an pushed on the stack when they trigger.
This patch fixes the Pl111 timings by creating a separate clock for
the pixel timings. The device clock is used for all interactions with
the memory system, just like the AHB clock on the actual module.
The result without this patch is that the module only is allowed to
send one request every tick of the 24MHz clock which causes a huge
backlog.
This patch changes the traffic generator period such that it does not
completely saturate the DRAM controller and create an ever-growing
backlog in the queued port.
A separate patch updates the stats.
This patch fixes the computation that determines whether to perform a
read or a write such that the two corner cases (0 and 100) are both
more efficient and handled correctly.
This patch adds a basic check to ensure that the packet queue does not
grow absurdly large. The queue should only be used to store packets
that were delayed due to blocking from the neighbouring port, and not
for actual storage. Thus, a limit of 100 has been chosen for now
(which is already quite substantial).
This patch addresses a warning related to the swig interface
generation for the Switch class. The cxx_header is now specified
correctly, and the header in question has got a few includes added to
make it all compile.
This patch fixes a linking error that occurs when using clang/llvm in
combination with older versions of glibc. The fix involves adding
-std=gnu89 to the command line when compiling libelf as clang defaults
to c99, causing issues with the symbols in sysmacros.h being defined
multiple times.
The platform has two KMI devices that are both setup to be keyboards. This
patch changes the second keyboard to a mouse. This patch will allow keyboard
input as usual and additionally provide mouse support.
This patch fixes a bug that caused multiple systems to overwrite each
other physical memory. The system name is now included in the filename
such that this is avoided.
This patch makes the values of ID_ISARx, MIDR, and FPSID configurable
as ISA parameter values. Additionally, setMiscReg now ignores writes
to all of the ID registers.
Note: This moves the MIDR parameter from ArmSystem to ArmISA for
consistency.
The ISA class on stores the contents of ID registers on many
architectures. In order to make reset values of such registers
configurable, we make the class inherit from SimObject, which allows
us to use the normal generated parameter headers.
This patch introduces a Python helper method, BaseCPU.createThreads(),
which creates a set of ISAs for each of the threads in an SMT
system. Although it is currently only needed when creating
multi-threaded CPUs, it should always be called before instantiating
the system as this is an obvious place to configure ID registers
identifying a thread/CPU.
This patch unlocks the cpu-local monitor when the CPU sees a snoop to a locked
address. Previously we relied on the cache to handle the locking for us, however
some users on the gem5 mailing list reported a case where the cpu speculatively
executes a ll operation after a pending sc operation in the pipeline and that
makes the cache monitor valid. This should handle that case by invaliding the
local monitor.
isSyscall was originally created because during handling of a syscall in SE
mode the threadcontext had to be updated. However, in many places this is used
in FS mode (e.g. fault handlers) and the name doesn't make much sense. The
boolean actually stops gem5 from squashing speculative and non-committed state
when a write to a threadcontext happens, so re-name the variable to something
more appropriate
Previous to this change we didn't always set the memory mode which worked as
long as we never attempted to switch CPUs or checked that a CPU was in a
memory system with the correct mode. Future changes will make CPUs verify
that they're operating in the correct mode and thus we need to always set it.
Most of the test cases currently contain a large amount of duplicated
boiler plate code. This changeset introduces a set of classes that
encapsulates most of the functionality when setting up a test
configuration.
The following base classes are introduced:
* BaseSystem - Basic system configuration that can be used for both
SE and FS simulation.
* BaseFSSystem - Basic FS configuration uni-processor and multi-processor
configurations.
* BaseFSSystemUniprocessor - Basic FS configuration for uni-processor
configurations. This is provided as a way
to make existing test cases backwards
compatible.
Architecture specific implementations are provided for ARM, Alpha, and
X86.
This interface is no longer used, and getting rid of it simplifies the
decoders and code that sets up the decoders. The thread context had been used
to read architectural state which was used to contextualize the instruction
memory as it came in. That was changed so that the state is now sent to the
decoders to keep locally if/when it changes. That's significantly more
efficient.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
The predecoder in x86 does a lot of work, most of which can be skipped if the
decoder cache is put in front of it.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
Avoid reading them every instruction, and also eliminate the last use of the
thread context in the decoders.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
This patch implements the fnstsw instruction. The code was originally written
by Vince Weaver. Gabe had made some comments about the code, but those were
never addressed. This patch addresses those comments.
This patch implements the fsincos instruction. The code was originally written
by Vince Weaver. Gabe had made some comments about the code, but those were
never addressed. This patch addresses those comments.
uopSet_uop is microop instruction that has the IsControl flags set, but the
IsCondControl or IsUncondControl flags seems not to be set, neither in
the construction nor where the microop is used. This patch adds the the
flags in the constructor of the instruction (MicroUopSetPCCPSR).
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
A flag was missing for the movret_uop microop instruction. This patch adds
that flag when the instruction is used, not directly in the constructor of
the instruction.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
The directed tester supports only generating only read or only write accesses. The
patch modifies the tester to support streams that have both read and write accesses.
The patch adds support to slicc for recognizing arguments that should be
passed to the constructor of a class. I did not like the fact that an explicit
check was being carried on the type 'TBETable' to figure out the arguments to
be passed to the constructor.
The patch also moves some of the member variables that are declared for all
the controllers to the base class AbstractController.
This patch adds a prefetcher for the ruby memory system. The prefetcher
is based on a prefetcher implemented by others (well, I don't know
who wrote the original). The prefetcher does stride-based prefetching,
both unit and non-unit. It obseves the misses in the cache and trains on
these. After the training period is over, the prefetcher starts issuing
prefetch requests to the controller.
