The aforementioned registers (Interrupt Processor Targets Registers) are
banked per-CPU, but are read-only. This patch eliminates the per-CPU
storage of these values that are simply computed.
Change-Id: I52cafc2f58e87dd54239a71326c01f4923544689
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2442
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Weiping Liao <weipingliao@google.com>
Instructions that use the coprocessor interface check the current
program status to determine whether the current context has the
priviledges to read from/write to the coprocessor. Some modes allow
the execution of coprocessor instructions, some others do not allow it,
while some other modes are unexpected (e.g., executing an AArch32
instruction while being in an AArch64 mode).
Previously we would unconditionally trigger a panic if we were in an
unexpected mode. This change removes the panic and replaces it
with an Undefined Instruction fault that triggers if and when a
coprocessor instruction commits in an unexpected mode. This allows
speculative coprocessor instructions from unexpected modes to execute
but prevents them from gettting committed.
Change-Id: If2776d5bae2471cdbaf76d0e1ae655f501bfbf01
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Rekai Gonzalez Alberquilla <rekai.gonzalezalberquilla@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2281
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Weiping Liao <weipingliao@google.com>
A completed write to a memory location that is Write-Through Cacheable
has to be visible to an external observer without the need of explicit
cache maintenance. This change adds support for Write-Through
Cacheable Normal memory and treats it as Non-cacheable. This incurs a
small penalty as accesses to the memory do not fill in the cache but
does not violate the properties of the memory type.
Change-Id: Iee17ef9d952a550be9ad660b1e60e9f6c4ef2c2d
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2280
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
There are cases where Drainable objects need to create new objects in
Drainable::resume(). In such cases, the local drain state will be
inherited from the DrainManager. We currently set the state to Running
as soon as we start resuming the simulator. This means that new
objects are created in the Running state rather than the Drained
state, which the resume code assumes. Depending on the traversal order
in DrainManager::resume(), this sometimes triggers a panic because the
object being resumed is in the wrong state.
This change introduces a new drain state, Resuming, that the
DrainManager enters as soon as it starts resuming the
simulator. Objects that are created while resuming are created in this
state. Such objects are then resumed in a subsequent pass over the
list of Drainable objects that need to be resumed. Once all objects
have been resumed, the simulator enters the Running state.
Change-Id: Ieee8645351ffbdec477e9cd2ff86fc795e459617
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2600
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Weiping Liao <weipingliao@google.com>
Add support for KVM in the big.LITTLE(tm) example configuration. This
replaces the --atomic option with a --cpu-type option that can be used
to switch between atomic, kvm, and timing simulation.
When running in KVM mode, the simulation script automatically assigns
separate event queues (threads) to each of the simulated CPUs. All
simulated devices, including CPU child devices (e.g., interrupt
controllers and caches), are assigned to event queue 0.
Change-Id: Ic9a3f564db91f5a3d3cb754c5a02fdd5c17d5fdf
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2561
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Weiping Liao <weipingliao@google.com>
The vanilla bL configuration file and the dist-gem5 configuration file
use slightly different code paths when restoring from
checkpoints. Unify this by passing the parsed options to the
instantiate() method and adding an optional checkpoint keyword
argument for checkpoint directories (only used by the dist-gem5
script).
Change-Id: I9943ec10bd7a256465e29c8de571142ec3fbaa0e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2560
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Weiping Liao <weipingliao@google.com>
The kernel and gem5 derive MPIDR values from CPU IDs in slightly
different ways. This means that guests running in a multi-CPU setup
sometimes fail to bring up secondary CPUs. Fix this by overriding the
MPIDR value in virtual CPUs just after they have been instantiated.
Change-Id: I916d44978a9c855ab89c80a083af45b0cea6edac
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2461
Reviewed-by: Weiping Liao <weipingliao@google.com>
The generic timer sometimes needs to access global state. This can
lead to race conditions when simulating a multi-core KVM system where
each core lives in its own thread. In that case, the setMiscReg and
readMiscReg methods are called from the thread owning the CPU and not
the global device thread.
Change-Id: Ie3e982258648c8562cce0b30a0c122dfbfaf42cd
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2460
Reviewed-by: Weiping Liao <weipingliao@google.com>
When setting the size of a PCI BAR, the kernel only supports powers of
two (as per the PCI spec). Previously, the size was incorrectly read
by the kernel, and the address ranges assigned to the PCI devices
could overlap, resulting in gem5 crashes. We now round up to the next
power of two.
Kudos to Sergei Trofimov who helped to debug this issue!
Change-Id: I54ca399b62ea07c09d4cd989b17dfa670e841bbe
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-by: Sergei Trofimov <sergei.trofimov@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2580
Reviewed-by: Paul Rosenfeld <prosenfeld@micron.com>
VirtIO transport interfaces always expect a VirtIO device
pointer. However, there are cases (in particular when using VirtIO's
MMIO interface) where we want to instantiate an interface without a
device. Add a dummy device using VirtIO device ID 0 and no queues to
handle this use case.
Change-Id: I6cbe12fd403903ef585be40279c3b1321fde48ff
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Rekai Gonzalez Alberquilla <rekai.gonzalezalberquilla@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2325
Reviewed-by: Weiping Liao <weipingliao@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Rename VIOPci -> VIOIface to avoid having a separate flag for the MMIO
interface.
Change-Id: I99f9210fa36ce33662c48537fd3992cd9a69d349
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Rekai Gonzalez Alberquilla <rekai.gonzalezalberquilla@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2324
Reviewed-by: Weiping Liao <weipingliao@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
In arch/arm/faults.hh, template the static member vals require explicit
specialisation to avoid compiler warnings.
Change-Id: Ie404ccaa43269cb1bb819e33153e776abbf3a79b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
When naively computing the relative path between the git hooks directory and a
hook we want to install, that will generally start with a few ".." path
components to work back out of the .git directory into the working directory.'
If the hooks directory is actually a symlink, then following ".." directory
entries won't get us back to where we came from, they'll take us to the actual
parent directory of hooks. The relative path we computed would then try to go
forward from this other directory using a path that would have worked in the
working directory, hopefully going somewhere that doesn't exist, but
potentially going to a totally unrelated file with the same relative path.
To avoid this problem, we should expand any symlinks in both the hooks
directory path, and the path to the hook script. That way, any ".." components
will go where we'd expect them to, and the relative path will actually go from
hooks to the script we expect.
Change-Id: I64d51bc817351f89b1d60eceaf450cc0a4553415
Reviewed-on: https://gem5-review.googlesource.com/2542
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
If the hooks directory is a symlink, then there are at least two possible
scenarios to consider when installing a hook which is itself a symlink. The
first is that hooks is a relative symlink, and so is likely intended to stay
in place relative to .git and the git working directory. In that case, it's ok
for the symlinks inside of hooks to be relative to the working directory too,
since they should also stay in place relatively speaking.
The second situation is that the symlink is absolute. In that case, moving the
git working directory will move the hook relative to the hook directory, and
any relative symlink will become broken. In that case, the hook symlink needs
to be absolute.
The same logic likely applies to the .git directory itself, although I haven't
run into a situation in practice where the .git directory is actually a
symlink.
Change-Id: I047aa198094dd0fd5a841417d93b211ece02783f
Reviewed-on: https://gem5-review.googlesource.com/2541
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
When installing a git hook, it's possible for the hook to not "exist" if it's
actually a symlink which points to a file that doesn't exist. Trying to create
a new symlink in its place without first removing the old one causes a build
failure in these cases.
If the hook doesn't "exist" but is still a link, that means it's actually a
broken link and should be deleted by the hook installation function before any
new symlink is created.
Change-Id: I59aa51feb5bd74ca33e51e89cde2ceabeb41bd76
Reviewed-on: https://gem5-review.googlesource.com/2540
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Determine if gem5 is running in a batch environment by checking if
STDIN is wired to a TTY or not. If the simulator is running in a batch
environment, disable all listeners by default. This behavior can be
overridden using the --enable-listeners option.
Change-Id: I404c709135339144216bf08a2769c016c543333c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sean McGoogan <sean.mcgoogan@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2322
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Add a small Python script that uses Gerrit's Change-Id: tags to list
incoming and outgoing changes.
Change-Id: Iea1757b2d64a57a4c7b4e47718cfcaa725a99615
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2329
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
The clone system call added in 236719892 relies on header files
from Linux systems. Obviously, this prevents compilation for
anyone using FreeBSD or Mac to compile the simulator. This
changeset is meant as a temporary fix to allow builds on
non-Linux systems until a proper solution is found.
Change-Id: I404cc41c588ed193dd2c1ca0c1aea35b0786fe4e
Reviewed-on: https://gem5-review.googlesource.com/2420
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
This change adds the ability to print a message at intervals
of committed instruction count to indicate progress in the
trace replay.
Change-Id: I8363502354c42bfc52936d2627986598b63a5797
Reviewed-by: Rekai Gonzalez Alberquilla <rekai.gonzalezalberquilla@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2321
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
With this change, the test script will output a warning when it reads
an incomplete (e.g., when a regression is still running) or corrupt
status file instead of throwing an exception. When the scipt is used
to show the results the corrupt file is skipped; when it is used to
test if all regressions run successfully it will return an error value
(2).
Change-Id: Ie7d9b457b200e3abc7ae6238e3efbf3d18cf4297
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2320
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
The Pl390::getAddrRanges() method should have been flagged using the
override keyword. Other methods in this class already use the override
keyword, so this results in a warning about inconsistent override
usage when compiling using clang.
Change-Id: I17449687a8e074262232562487b58c96466bd54e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
The GIC model currently adds a delay to interrupts when posting them
to a target CPU. This means that an interrupt signal will be
represented by an event for a short period of time. We currently
ignore this when draining and serialize the tick when the interrupt
will fire. Upon loading the checkpoint, the simulated GIC reschedules
the pending events. This behaviour is undesirable when we implement
support for switching between in-kernel GIC emulation and gem5 GIC
emulation. In that case, the (kernel) GIC model gets a lot simpler if
we don't need to worry about in-flight interrupts from the gem5 GIC.
This changeset adds a draining check to force the GIC into a state
where all interrupts have been delivered prior to checkpointing/CPU
switching. It also removes the now redundant serialization of
interrupt events.
Change-Id: I8b8b080aa291ca029a3a7bdd1777f1fcd5b01179
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2331
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Lots of minor cleaups:
* Make cached params const
* Don't serialize params
* Use AddrRange to represent the distributor and CPU address spaces
* Store a const AddrRangeList of all PIO ranges
Change-Id: I40a17bc3a38868fb3b8af247790e852cf99ddf1d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2330
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Change-Id: I02719f3572f6665cace1eb5681f297dcde9e71ce
Reviewed-on: https://gem5-review.googlesource.com/2271
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
This changeset sets the implementation policy for a subset of
system calls to the ignoreFunc implementation (for x86 only).
The ignored system calls likely will never be implemented and
this allows a warning to be issued instead of the simulation
exiting with a fatal.
Change-Id: I8d9741ad683151e88cc71156d3602e2d0ccb0acf
Reviewed-on: https://gem5-review.googlesource.com/2270
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
The changeset does a major refactor on the exit, exit_group, and
futex system calls regarding exit functionality.
A FutexMap class and related structures are added into a new
file. This increases code clarity by encapsulating the futex
operations and the futex state into an object.
Several exit conditions were added to allow the simulator to end
processes under certain conditions. Also, the simulation only
exits now when all processes have finished executing.
Change-Id: I1ee244caa9b5586fe7375e5b9b50fd3959b9655e
Reviewed-on: https://gem5-review.googlesource.com/2269
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
This changeset adds support to kill a thread group by calling
the tgkill system call. The functionality is needed in some
pthread applications.
Change-Id: I0413a3331be69b74dfab30de95384113ec4efb63
Reviewed-on: https://gem5-review.googlesource.com/2268
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
This changeset adds a simple class definition and a member
in the System object to track signals sent between processes.
The implementation cannot support all signals that might be
sent between processes, but it can support some of the simple
use cases like SIGCHLD.
Change-Id: Id5f95aa60e7f49da1c5b5596fbfa26e729453ac7
Reviewed-on: https://gem5-review.googlesource.com/2267
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
This changeset extends the pipe system call to work with
architectures other than Alpha (and enables the syscall for
x86). For the dup system call, it sets the clone-on-exec
flag by default. For the dup2 system call, the changeset
adds an implementation (and enables it for x86).
Change-Id: I00ddb416744ee7dd61a5cd02c4c3d97f30543878
Reviewed-on: https://gem5-review.googlesource.com/2266
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
This changeset adds refactors the existing open system call,
adds the openat variant (enabled for x86 builds), and adds
additional "special file" test cases for /proc/meminfo and
/etc/passwd.
Change-Id: I6f429db65bbf2a28ffa3fd12df518c2d0de49663
Reviewed-on: https://gem5-review.googlesource.com/2265
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
This changeset fixes line alignment issues, spacing, spelling,
etc. for files that are used during SE Mode.
Change-Id: Ie61b8d0eb4ebb5af554d72f1297808027833616e
Reviewed-on: https://gem5-review.googlesource.com/2264
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
The Process class is full of implementation details and
structures related to SE Mode. This changeset factors out an
internal class from Process and moves it into a separate file.
The purpose behind doing this is to clean up the code and make
it a bit more modular.
Change-Id: Ic6941a1657751e8d51d5b6b1dcc04f1195884280
Reviewed-on: https://gem5-review.googlesource.com/2263
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
See a06a46f and a854373.
Change-Id: Id66427db22b7d7764c218b9cd78d95db929f4127
Signed-off-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
Reviewed-on: https://gem5-review.googlesource.com/2224
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
The MOESI_hammer directory assumes a contiguous address space, but X86
has an IO gap from 3-4GB. This patch allows the directory to work with
more than 3GB of memory on X86.
Assumptions: the physical address space (range of possible physical
addresses) is 0-XGB when X <= 3GB, and 0-(X+1)GB when X > 3GB. If there
is no IO gap this patch should still work.
Change-Id: I5453a09e953643cada2c096a91d339a3676f55ee
Reviewed-on: https://gem5-review.googlesource.com/2169
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
The slicc compiler currently treats && and || with the same precedence.
This is highly non-intuitive to people used to C, and was probably an
error. This patch makes && bind tighter than ||.
For example, previously:
if (A || B && C)
compiled to:
if ((A || B) && C)
With this patch, it compiles to:
if (A || (B && C))
Change-Id: Idbbd5b50cc86a8d6601045adc14a253284d7b791
Signed-off-by: Lena Olson (leolson@google.com)
Reviewed-on: https://gem5-review.googlesource.com/2168
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Joe Gross <criusx@gmail.com>
Reviewed-by: Sooraj Puthoor <puthoorsooraj@gmail.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Conflicts:
COPYING
This document details how to contribute to gem5 based on our new
contribution flow with git and gerrit.
Change-Id: I0a7e15fd83a3ee3ab6c85c1192f46f1e1d33b7c2
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: http://reviews.gem5.org/r/3814/
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Pierre-Yves Peneau <pierre-yves.peneau@lirmm.fr>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-by: Brad Beckmann <brad.beckmann@amd.com>
Reviewed-by: Ali Saidi <Ali.Saidi@ARM.com>
The GPUCoalescer and the Shader classes have different base classes in
C++ and Python. This causes subtle bugs in SWIG and compilation errors
for PyBind.
Change-Id: I1ddd2a8ea43f083470538ddfea891347b21d14d8
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2228
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com>
The Python wrappers get confused by the forward declarations in the
power framework. This changeset restructures the code slightly to
avoid the troublesome forward declarations.
Change-Id: Id8c93224f1988edb5fdf9d3abc6237f2f688c02d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2227
Reviewed-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Use the new fast scan-out API in the PixelPump to render frames at a
fixed frame rate in KVM mode. The refresh rate when running in KVM can
be controlled by the virt_refresh_rate parameter.
Change-Id: Ib3c78f174e3f8f4ca8a9b723c4e5d311a433b8aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2242
Reviewed-by: Rahul Thakur <rjthakur@google.com>
Add a helper function to scan out an entire frame in one time
step. This requires the public PixelPump to be changed somewhat to
separate timing updates from general PixelPump control. Instead of
calling PixelPump::start(timings), timings now need to be updated
using a separate call to PixelPump::updateTimings(timings) before
calling PixelPump::start().
Display controllers that don't need accurate timing (e.g., in KVM
mode), can use the new PixelPump::renderFrame() API to render an
entire frame in one step. This call results in the same callbacks
(e.g., calls to nextPixel()) as the timing calls, but they all happen
in immediately. Unlike the timing counterpart, renderFrame() doesn't
support buffer underruns and will panic if nextPixle() indicates an
underrun.
Change-Id: I76c84db04249b02d4207c5281d82aa693d0881be
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2241
Reviewed-by: Rahul Thakur <rjthakur@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Use a fast, functional, read operations keep the DMA FIFO full when
running in KVM mode.
Change-Id: I5b378c2fb6a1d3e687cef15e807e63a0a53a60e2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2226
Reviewed-by: Rahul Thakur <rjthakur@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Added functionality to check and clear interrupts for KMI
devices. This fixes a boot bug when using KVM and in-kernel GIC
emulation.
Change-Id: Ia3e91d07567b7faf3f82b0adfda4a165a502a339
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2225
Reviewed-by: Rahul Thakur <rjthakur@google.com>
The WaitRec structure in the Process class is unnecessary. There
is a member declaration inside of the Process class, waitList,
that uses the WaitRec definition. However, waitList is unused so
they are both dead bits of code. This changeset removes both the
WaitRec struct and waitList member from Process.
Change-Id: Ia6ee7488b9f47fd0f0ae29c818fba6ea0710699c
Reviewed-on: https://gem5-review.googlesource.com/2262
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
blkAlign was defined as a separate function in the base associative
and fully-associative tags classes although both functions implemented
identical functionality. This patch moves the blkAlign in the base
tags class.
Change-Id: I3d415d0e62bddeec7ce0d559667e40a8c5fdc2d4
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Change-Id: I0ed4e528cb750a323facdc811dde7f0ed1ff228e
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
