Commit graph

9386 commits

Author SHA1 Message Date
Nathanael Premillieu
fe2faa1975 util: Fix issues with style checker. 2012-07-27 16:08:05 -04:00
Ali Saidi
b1a58933e0 stats: update stats for icache change not allowing dirty data 2012-07-27 16:08:05 -04:00
Anthony Gutierrez
630068be6f dma: remove unused variable
this patch removes the actionInProgress field from the DmaPort class.
this variable is only defined and initiated in the ctor. it is never used.
2012-07-27 16:08:05 -04:00
Anthony Gutierrez
8133f2460f checker: make checker cpu id match its host's cpu id
when using the checker i ran into problems where an instruction reading the
cpu id register failed because the ids did not match, and hence, the result
of the instruction did not match. this patch ensures that the ids match so
this instruction does not fail. this problem only seemed to manifest itself
when multiple cores were in the system, either multi-core, or extra switched-
out cores present in the system.
2012-07-27 16:08:04 -04:00
Anthony Gutierrez
7bf14aedbf cache: don't allow dirty data in the i-cache
removes the optimization that forwards an exclusive copy to a requester on a
read, only for the i-cache. this optimization isn't necessary because we
typically won't be writing to the i-cache.
2012-07-27 16:08:04 -04:00
Anthony Gutierrez
2eb6b403c9 ARM: fix value of MISCREG_CTR returned by readMiscReg()
According to the A15 TRM the value of this register is as follows (assuming 16 word = 64 byte lines)
[31:29] Format - b100 specifies v7
[28] RAZ - b0
[27:24] CWG log2(max writeback size #words) - 0x4 16 words
[23:20] ERG log2(max reservation size #words) - 0x4 16 words
[19:16] DminLine log2(smallest dcache line #words) - 0x4 16 words
[15:14] L1Ip L1 index/tagging policy - b11 specifies PIPT
[13:4] RAZ - b0000000000
[3:0] IminLine log2(smallest icache line #words) - 0x4 16 words
2012-07-27 16:08:04 -04:00
Andreas Hansson
ae6ab7c03c Config: Use clock option in se/fs script and pass to switch_cpus
This patch changes the se and fs script to use the clock option and
not simply set the CPUs clock to 2 GHz. It also makes a minor change
to the assignment of the switch_cpus clock to allow different clocks.
2012-07-23 09:32:22 -04:00
Andreas Hansson
66f5124e2b Bridge: Use EventWrapper instead of Event subclass for sendEvent
This class simply cleans up the code by making use of the EventWrapper
convenience class to schedule the sendEvent in the bridge ports.
2012-07-23 09:32:19 -04:00
Steve Reinhardt
42596d27e9 test: Update eio ref outputs due to recent changes
Actual stats updates covering period since original ref outputs
were clobbered.
2012-07-23 00:39:12 -04:00
Steve Reinhardt
882a4b65bd test: Restore eio ref files clobbered in rev 8800b05e1cb3.
Apparently Nate did a wholesale update of stats files using
a binary compiled without eio, resulting in broken refernce
outputs.
2012-07-23 00:33:05 -04:00
Nilay Vaish
2590a7dd0a Regression: Update stats due to changes to x86 cpuid instruction 2012-07-22 20:31:24 -05:00
Nilay Vaish
11a551ae3a X86 CPUID: Return false if unknown processor family 2012-07-22 20:31:23 -05:00
Andreas Hansson
5e7f174b74 Regression: Fix topologies path in failing pc-simple-timing-ruby
This patch updates the path to the Ruby topologies and thus fixes a
failing regression.
2012-07-21 17:24:01 -04:00
Steve Reinhardt
392ba0131f Added tag stable_2012_06_28 for changeset f75ee4849c40 2012-07-19 16:53:02 -07:00
Steve Reinhardt
c7775731a9 Added tag stable_2012_02_02 for changeset 549b72de8f72 2012-07-19 16:51:01 -07:00
Andreas Hansson
f00cba34eb Mem: Make SimpleMemory single ported
This patch changes the simple memory to have a single slave port
rather than a vector port. The simple memory makes no attempts at
modelling the contention between multiple ports, and any such
multiplexing and demultiplexing could be done in a bus (or crossbar)
outside the memory controller. This scenario also matches with the
ongoing work on a SimpleDRAM model, which will be a single-ported
single-channel controller that can be used in conjunction with a bus
(or crossbar) to create a multi-port multi-channel controller.

There are only very few regressions that make use of the vector port,
and these are all for functional accesses only. To facilitate these
cases, memtest and memtest-ruby have been updated to also have a
"functional" bus to perform the (de)multiplexing of the functional
memory accesses.
2012-07-12 12:56:13 -04:00
Andreas Hansson
55bfe13705 scons: Add LIBRARY_PATH from the user environment to Scons
This patch adds the LIBRARY_PATH from the users OS environment to
Scons build environment. This path is used when linking to search for
libraries, and this patch enables tcmalloc to be used during the build
even if it is not placed in the default search paths.
2012-07-12 12:56:11 -04:00
Nilay Vaish
019ced8d85 Regression: update ruby.stats file 2012-07-12 08:39:20 -05:00
Nilay Vaish
b913af440b Ruby: remove config information from ruby.stats
This patch removes printConfig() functions from all structures in Ruby.
Most of the information is already part of config.ini, and where ever it
is not, it would become in due course.
2012-07-12 08:39:19 -05:00
Nilay Vaish
ce4e9a9a50 Ruby: remove some unused stuff from SLICC files 2012-07-12 08:39:18 -05:00
Brad Beckmann
8c18f6da9e x86: added page size in bytes tlb entry function 2012-07-11 12:21:04 -07:00
Brad Beckmann
5931087dcd ruby: improved DRAM reset comment 2012-07-11 09:44:34 -07:00
Brad Beckmann
b00fe08cc9 regress: ruby stat additions and config changes 2012-07-10 22:51:55 -07:00
Marc Orr
387f843d51 syscall emulation: Add the futex system call. 2012-07-10 22:51:54 -07:00
Brad Beckmann
52540b1b78 x86: logSize and lruSeq are now optional ckpt params 2012-07-10 22:51:54 -07:00
Steve Reinhardt
2e47aaabc0 Add hook to call map() on Process from python.
This enables configuration scripts to set up mappings
from process virtual addresses to specific physical
addresses in SE mode.  This feature is needed to
support modeling of user-accessible memories or
devices in SE mode, avoiding the complexities of FS
mode and the need to write a device driver.
2012-07-10 22:51:54 -07:00
Brad Beckmann
645fa9c262 # User Brad Beckmann <Brad.Beckmann@amd.com>
ruby: fixed fatal print statement
2012-07-10 22:51:54 -07:00
Brad Beckmann
6f9bd33b73 ruby: remove the cpu assumptions for the random tester 2012-07-10 22:51:54 -07:00
Brad Beckmann
a22918dd41 # User Brad Beckmann <Brad.Beckmann@amd.com>
ruby: fixed msgptr print call
2012-07-10 22:51:54 -07:00
Brad Beckmann
884cd6f752 imported patch jason/slicc-external-structure-fix 2012-07-10 22:51:54 -07:00
Brad Beckmann
86d6b788f6 ruby: banked cache array resource model
This patch models a cache as separate tag and data arrays.  The patch exposes
the banked array as another resource that is checked by SLICC before a
transition is allowed to execute.  This is similar to how TBE entries and slots
in output ports are modeled.
2012-07-10 22:51:54 -07:00
Joel Hestness
467093ebf2 ruby: tag and data cache access support
Updates to Ruby to support statistics counting of cache accesses.  This feature
serves multiple purposes beyond simple stats collection.  It provides the
foundation for ruby to model the cache tag and data arrays as physical
resources, as well as provide the necessary input data for McPAT power
modeling.
2012-07-10 22:51:54 -07:00
Nuwan Jayasena
c10f348120 ruby: adds reset function to Ruby memory controllers 2012-07-10 22:51:54 -07:00
Nuwan Jayasena
1740c4c448 ruby: memory controllers now inherit from an abstract "MemoryControl" class 2012-07-10 22:51:53 -07:00
Brad Beckmann
4a52a6ea2d cpu: added assertions to ensure the correct proxies are used 2012-07-10 22:51:53 -07:00
Brad Beckmann
11b725c19d ruby: changes how Topologies are created
Instead of just passing a list of controllers to the makeTopology function
in src/mem/ruby/network/topologies/<Topo>.py we pass in a function pointer
which knows how to make the topology, possibly with some extra state set
in the configs/ruby/<protocol>.py file. Thus, we can move all of the files
from network/topologies to configs/topologies. A new class BaseTopology
is added which all topologies in configs/topologies must inheirit from and
follow its API.

--HG--
rename : src/mem/ruby/network/topologies/Crossbar.py => configs/topologies/Crossbar.py
rename : src/mem/ruby/network/topologies/Mesh.py => configs/topologies/Mesh.py
rename : src/mem/ruby/network/topologies/MeshDirCorners.py => configs/topologies/MeshDirCorners.py
rename : src/mem/ruby/network/topologies/Pt2Pt.py => configs/topologies/Pt2Pt.py
rename : src/mem/ruby/network/topologies/Torus.py => configs/topologies/Torus.py
2012-07-10 22:51:53 -07:00
Andreas Hansson
745274cbd4 EventManager: Rename queue accessor and remove cast operator
This patch renames the queue() accessor to the less ambigious
eventQueue, and also removes the cast operator. The queue() member
function cause problems in derived classes that declare members with
the same name, e.g. a MemObject subclass that has a packet queue on
its own. The operator is not causing any harm at this point, but as it
is not used there is little point in keeping it.
2012-07-09 12:35:46 -04:00
Andreas Hansson
d2f458e7b5 Mem: Make members relating to range and size constant
This patch makes the address-range related members const. The change
is trivial and merely ensures that they can be called on a const
memory.
2012-07-09 12:35:44 -04:00
Andreas Hansson
67e257f442 Port: Hide the queue implementation in SimpleTimingPort
This patch makes the queue implementation in the SimpleTimingPort
private to avoid confusion with the protected member queue in the
QueuedSlavePort. The SimpleTimingPort provides the queue_impl to the
QueuedSlavePort and it can be accessed via the reference in the base
class. The use of the member name queue is thus no longer overloaded.
2012-07-09 12:35:42 -04:00
Andreas Hansson
fda338f8d3 Stats: Updates due to bus changes
This patch bumps all the stats to reflect the bus changes, i.e. the
introduction of the state variable, the division into a request and
response layer, and the new default bus width of 8 bytes.
2012-07-09 12:35:41 -04:00
Andreas Hansson
b265d9925c Port: Align port names in C++ and Python
This patch is a first step to align the port names used in the Python
world and the C++ world. Ultimately it serves to make the use of
config.json together with output from the simulation easier, including
post-processing of statistics.

Most notably, the CPU, cache, and bus is addressed in this patch, and
there might be other ports that should be updated accordingly. The
dash name separator has also been replaced with a "." which is what is
used to concatenate the names in python, and a separation is made
between the master and slave port in the bus.
2012-07-09 12:35:39 -04:00
Andreas Hansson
1c2ee987f3 Bus: Make the default bus width 8 bytes instead of 64
This patch changes the default bus width to a more sensible 8 bytes
(64 bits), which is in line with most on-chip buses. Although there
are cases where a wider or narrower bus is useful, the 8 bytes is a
good compromise to serve as the default.

This patch changes essentially all statistics, and will be bundled
with the outstanding changes to the bus.
2012-07-09 12:35:38 -04:00
Andreas Hansson
8caaac048a Bus: Split the bus into separate request/response layers
This patch splits the existing buses into multiple layers. The
non-coherent bus is split into a request and a response layer, and the
coherent bus adds an additional layer for the snoop responses. The
layer is modified to be templatised on the port type, such that the
different layers can have retryLists with either master or slave
ports. This patch also removes the dynamic cast from the retry, as
previously promised when moving the recvRetry from the port base class
to the master/slave port respectively.

Overall, the split bus more closely reflects any modern on-chip bus
and should be at step in the right direction. From this point, it
would be reasonable straight forward to add separate layers (and thus
contention points and arbitration) for each port and thus create a
true crossbar.

The regressions all produce the correct output, but have varying
degrees of changes to their statistics. A separate patch will be
pushed with the updates to the reference statistics.
2012-07-09 12:35:37 -04:00
Andreas Hansson
995e6e4670 Bus: Add a notion of layers to the buses
This patch moves all flow control, arbitration and state information
into a bus layer. The layer is thus responsible for all the state
transitions, and for keeping hold of the retry list. Consequently the
layer is also responsible for the draining.

With this change, the non-coherent and coherent bus are given a single
layer to avoid changing any temporal behaviour, but the patch opens up
for adding more layers.
2012-07-09 12:35:36 -04:00
Andreas Hansson
14f9c77dd3 Bus: Replace tickNextIdle and inRetry with a state variable
This patch adds a state enum and member variable in the bus, tracking
the bus state, thus eliminating the need for tickNextIdle and inRetry,
and fixing an issue that allowed the bus to be occupied by multiple
packets at once (hopefully it also makes it easier to understand the
code).

The bus, in its current form, uses tickNextIdle and inRetry to keep
track of the state of the bus. However, it only updates tickNextIdle
_after_ forwarding a packet using sendTiming, and the result is that
the bus is still seen as idle, and a module that receives the packet
and starts transmitting new packets in zero time will still see the
bus as idle (and this is done by a number of DMA devices). The issue
can also be seen in isOccupied where the bus calls reschedule on an
event instead of schedule.

This patch addresses the problem by marking the bus as _not_ idle
already by the time we conclude that the bus is not occupied and we
will deal with the packet.

As a result of not allowing multiple packets to occupy the bus, some
regressions have slight changes in their statistics. A separate patch
updates these accordingly.

Further ahead, a follow-on patch will introduce a separate state
variable for request/responses/snoop responses, and thus implement a
split request/response bus with separate flow control for the
different message types (even further ahead it will introduce a
multi-layer bus).
2012-07-09 12:35:35 -04:00
Andreas Hansson
46d9adb68c Port: Make getAddrRanges const
This patch makes getAddrRanges const throughout the code base. There
is no reason why it should not be, and making it const prevents adding
any unintentional side-effects.
2012-07-09 12:35:34 -04:00
Andreas Hansson
830391cad9 Port: Add getAddrRanges to master port (asking slave port)
This patch adds getAddrRanges to the master port, and thus avoids
going through getSlavePort to be able to ask the slave. Similar to the
previous patch that added isSnooping to the SlavePort, this patch aims
to introduce an additional level of hierarchy in the ports (base port
being protocol-agnostic) and getSlave/MasterPort will return port
pointers to these base classes.

The function is named getAddrRanges also on the master port, but does
nothing besides asking the connected slave port. The slave port, as
before, has to provide an implementation and actually produce a list
of address ranges. The initial design used the name getSlaveAddrRanges
for the new function, but the more verbose name was later changed.
2012-07-09 12:35:33 -04:00
Andreas Hansson
49407d76aa Port: Add isSnooping to slave port (asking master port)
This patch adds isSnooping to the slave port, and thus avoids going
through getMasterPort to be able to ask the master. Over the course of
the next few patches, all getMasterPort/getSlavePort in Port and
MemObject are to be protocol agnostic, and the snooping is part of the
protocol layer.

The function is already present on the master port, where it is
implemented by the module itself, e.g. a cache. On the slave side, it
is merely asking the connected master port. The same name is used by
both functions despite their difference in behaviour. The initial
design used isMasterSnooping on the slave port side, but the more
verbose function name was later changed.
2012-07-09 12:35:32 -04:00
Andreas Hansson
17f9270dad Port: Move retry from port base class to Master/SlavePort
This patch is the last part of moving all protocol-related
functionality out of the Port base class. All the send/recv functions
are already moved, and the retry (which still governs all the timing
transport functions) is the only part that remained in the base class.

The only point where this currently causes a bit of inconvenience is
in the bus where the retry list is global and holds Port pointers (not
Master/SlavePort). This is about to change with the split into a
request/response bus and will soon be removed anyway.

The patch has no impact on any regressions.
2012-07-09 12:35:31 -04:00
Andreas Hansson
ff5718f042 Fix: Address a few benign memory leaks
This patch is the result of static analysis identifying a number of
memory leaks. The leaks are all benign as they are a result of not
deallocating memory in the desctructor. The fix still has value as it
removes false positives in the static analysis.
2012-07-09 12:35:30 -04:00