gem5/configs/common/FSConfig.py

496 lines
20 KiB
Python
Raw Normal View History

# Copyright (c) 2010 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder. You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Copyright (c) 2006-2008 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Kevin Lim
from m5.objects import *
from Benchmarks import *
class CowIdeDisk(IdeDisk):
image = CowDiskImage(child=RawDiskImage(read_only=True),
read_only=False)
def childImage(self, ci):
self.image.child.image_file = ci
class MemBus(Bus):
badaddr_responder = BadAddr()
default = Self.badaddr_responder.pio
Finish test clean-up & reorg. configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 20:42:44 +02:00
def makeLinuxAlphaSystem(mem_mode, mdesc = None):
class BaseTsunami(Tsunami):
ethernet = NSGigE(pci_bus=0, pci_dev=1, pci_func=0)
ide = IdeController(disks=[Parent.disk0, Parent.disk2],
pci_func=0, pci_dev=0, pci_bus=0)
self = LinuxAlphaSystem()
Finish test clean-up & reorg. configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 20:42:44 +02:00
if not mdesc:
# generic system
mdesc = SysConfig()
self.readfile = mdesc.script()
self.iobus = Bus(bus_id=0)
self.membus = MemBus(bus_id=1)
self.bridge = Bridge(delay='50ns', nack_delay='4ns')
self.physmem = PhysicalMemory(range = AddrRange(mdesc.mem()))
self.bridge.side_a = self.iobus.port
self.bridge.side_b = self.membus.port
self.physmem.port = self.membus.port
self.disk0 = CowIdeDisk(driveID='master')
self.disk2 = CowIdeDisk(driveID='master')
self.disk0.childImage(mdesc.disk())
self.disk2.childImage(disk('linux-bigswap2.img'))
self.tsunami = BaseTsunami()
self.tsunami.attachIO(self.iobus)
self.tsunami.ide.pio = self.iobus.port
self.tsunami.ethernet.pio = self.iobus.port
self.simple_disk = SimpleDisk(disk=RawDiskImage(image_file = mdesc.disk(),
read_only = True))
self.intrctrl = IntrControl()
self.mem_mode = mem_mode
self.terminal = Terminal()
self.kernel = binary('vmlinux')
self.pal = binary('ts_osfpal')
self.console = binary('console')
self.boot_osflags = 'root=/dev/hda1 console=ttyS0'
return self
def makeLinuxAlphaRubySystem(mem_mode, mdesc = None):
class BaseTsunami(Tsunami):
ethernet = NSGigE(pci_bus=0, pci_dev=1, pci_func=0)
ide = IdeController(disks=[Parent.disk0, Parent.disk2],
pci_func=0, pci_dev=0, pci_bus=0)
physmem = PhysicalMemory(range = AddrRange(mdesc.mem()))
self = LinuxAlphaSystem(physmem = physmem)
if not mdesc:
# generic system
mdesc = SysConfig()
self.readfile = mdesc.script()
# Create pio bus to connect all device pio ports to rubymem's pio port
self.piobus = Bus(bus_id=0)
#
# Pio functional accesses from devices need direct access to memory
# RubyPort currently does support functional accesses. Therefore provide
# the piobus a direct connection to physical memory
#
self.piobus.port = physmem.port
self.disk0 = CowIdeDisk(driveID='master')
self.disk2 = CowIdeDisk(driveID='master')
self.disk0.childImage(mdesc.disk())
self.disk2.childImage(disk('linux-bigswap2.img'))
self.tsunami = BaseTsunami()
self.tsunami.attachIO(self.piobus)
self.tsunami.ide.pio = self.piobus.port
self.tsunami.ethernet.pio = self.piobus.port
#
# Store the dma devices for later connection to dma ruby ports.
# Append an underscore to dma_devices to avoid the SimObjectVector check.
#
self._dma_devices = [self.tsunami.ide, self.tsunami.ethernet]
self.simple_disk = SimpleDisk(disk=RawDiskImage(image_file = mdesc.disk(),
read_only = True))
self.intrctrl = IntrControl()
self.mem_mode = mem_mode
self.terminal = Terminal()
self.kernel = binary('vmlinux')
self.pal = binary('ts_osfpal')
self.console = binary('console')
self.boot_osflags = 'root=/dev/hda1 console=ttyS0'
return self
def makeSparcSystem(mem_mode, mdesc = None):
Move SimObject python files alongside the C++ and fix the SConscript files so that only the objects that are actually available in a given build are compiled in. Remove a bunch of files that aren't used anymore. --HG-- rename : src/python/m5/objects/AlphaTLB.py => src/arch/alpha/AlphaTLB.py rename : src/python/m5/objects/SparcTLB.py => src/arch/sparc/SparcTLB.py rename : src/python/m5/objects/BaseCPU.py => src/cpu/BaseCPU.py rename : src/python/m5/objects/FuncUnit.py => src/cpu/FuncUnit.py rename : src/python/m5/objects/IntrControl.py => src/cpu/IntrControl.py rename : src/python/m5/objects/MemTest.py => src/cpu/memtest/MemTest.py rename : src/python/m5/objects/FUPool.py => src/cpu/o3/FUPool.py rename : src/python/m5/objects/FuncUnitConfig.py => src/cpu/o3/FuncUnitConfig.py rename : src/python/m5/objects/O3CPU.py => src/cpu/o3/O3CPU.py rename : src/python/m5/objects/OzoneCPU.py => src/cpu/ozone/OzoneCPU.py rename : src/python/m5/objects/SimpleOzoneCPU.py => src/cpu/ozone/SimpleOzoneCPU.py rename : src/python/m5/objects/BadDevice.py => src/dev/BadDevice.py rename : src/python/m5/objects/Device.py => src/dev/Device.py rename : src/python/m5/objects/DiskImage.py => src/dev/DiskImage.py rename : src/python/m5/objects/Ethernet.py => src/dev/Ethernet.py rename : src/python/m5/objects/Ide.py => src/dev/Ide.py rename : src/python/m5/objects/Pci.py => src/dev/Pci.py rename : src/python/m5/objects/Platform.py => src/dev/Platform.py rename : src/python/m5/objects/SimConsole.py => src/dev/SimConsole.py rename : src/python/m5/objects/SimpleDisk.py => src/dev/SimpleDisk.py rename : src/python/m5/objects/Uart.py => src/dev/Uart.py rename : src/python/m5/objects/AlphaConsole.py => src/dev/alpha/AlphaConsole.py rename : src/python/m5/objects/Tsunami.py => src/dev/alpha/Tsunami.py rename : src/python/m5/objects/T1000.py => src/dev/sparc/T1000.py rename : src/python/m5/objects/Bridge.py => src/mem/Bridge.py rename : src/python/m5/objects/Bus.py => src/mem/Bus.py rename : src/python/m5/objects/MemObject.py => src/mem/MemObject.py rename : src/python/m5/objects/PhysicalMemory.py => src/mem/PhysicalMemory.py rename : src/python/m5/objects/BaseCache.py => src/mem/cache/BaseCache.py rename : src/python/m5/objects/CoherenceProtocol.py => src/mem/cache/coherence/CoherenceProtocol.py rename : src/python/m5/objects/Repl.py => src/mem/cache/tags/Repl.py rename : src/python/m5/objects/Process.py => src/sim/Process.py rename : src/python/m5/objects/Root.py => src/sim/Root.py rename : src/python/m5/objects/System.py => src/sim/System.py extra : convert_revision : 173f8764bafa8ef899198438fa5573874e407321
2007-05-28 04:21:17 +02:00
class CowMmDisk(MmDisk):
image = CowDiskImage(child=RawDiskImage(read_only=True),
read_only=False)
def childImage(self, ci):
self.image.child.image_file = ci
self = SparcSystem()
if not mdesc:
# generic system
mdesc = SysConfig()
self.readfile = mdesc.script()
self.iobus = Bus(bus_id=0)
self.membus = MemBus(bus_id=1)
self.bridge = Bridge(delay='50ns', nack_delay='4ns')
self.t1000 = T1000()
self.t1000.attachOnChipIO(self.membus)
self.t1000.attachIO(self.iobus)
self.physmem = PhysicalMemory(range = AddrRange(Addr('1MB'), size = '64MB'), zero = True)
More changes to get SPARC fs closer. Now at 1.2M cycles before difference configs/common/FSConfig.py: seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config. src/arch/sparc/isa/decoder.isa: change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect src/arch/sparc/miscregfile.cc: For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this). Use instruction count from cpu rather than cycles because that is what legion does we can change it back after were done with legion src/base/bitfield.hh: add a new function mbits() that just masks off bits of interest but doesn't shift src/cpu/base.cc: src/cpu/base.hh: add instruction count to cpu src/cpu/exetrace.cc: src/cpu/m5legion_interface.h: compare instruction count between legion and m5 too src/cpu/simple/atomic.cc: change asserts of packet success to if panics wrapped with NDEBUG defines so we can get some more useful information when we have a bad address src/dev/isa_fake.cc: src/dev/isa_fake.hh: src/python/m5/objects/Device.py: expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses src/python/m5/objects/System.py: convert some tabs to spaces src/python/m5/objects/T1000.py: add more fake devices for each l1 bank and each memory controller --HG-- extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
2006-12-04 06:54:40 +01:00
self.physmem2 = PhysicalMemory(range = AddrRange(Addr('2GB'), size ='256MB'), zero = True)
self.bridge.side_a = self.iobus.port
self.bridge.side_b = self.membus.port
self.physmem.port = self.membus.port
More changes to get SPARC fs closer. Now at 1.2M cycles before difference configs/common/FSConfig.py: seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config. src/arch/sparc/isa/decoder.isa: change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect src/arch/sparc/miscregfile.cc: For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this). Use instruction count from cpu rather than cycles because that is what legion does we can change it back after were done with legion src/base/bitfield.hh: add a new function mbits() that just masks off bits of interest but doesn't shift src/cpu/base.cc: src/cpu/base.hh: add instruction count to cpu src/cpu/exetrace.cc: src/cpu/m5legion_interface.h: compare instruction count between legion and m5 too src/cpu/simple/atomic.cc: change asserts of packet success to if panics wrapped with NDEBUG defines so we can get some more useful information when we have a bad address src/dev/isa_fake.cc: src/dev/isa_fake.hh: src/python/m5/objects/Device.py: expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses src/python/m5/objects/System.py: convert some tabs to spaces src/python/m5/objects/T1000.py: add more fake devices for each l1 bank and each memory controller --HG-- extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
2006-12-04 06:54:40 +01:00
self.physmem2.port = self.membus.port
self.rom.port = self.membus.port
self.nvram.port = self.membus.port
self.hypervisor_desc.port = self.membus.port
self.partition_desc.port = self.membus.port
self.intrctrl = IntrControl()
self.disk0 = CowMmDisk()
self.disk0.childImage(disk('disk.s10hw2'))
self.disk0.pio = self.iobus.port
Implement Niagara I/O interface and rework interrupts configs/common/FSConfig.py: Use binaries we've compiled instead of the ones that come with Legion src/arch/alpha/interrupts.hh: get rid of post(int int_type) and add a get_vec function that gets the interrupt vector for an interrupt number src/arch/sparc/asi.cc: Add AsiIsInterrupt() to AsiIsMmu() src/arch/sparc/faults.cc: src/arch/sparc/faults.hh: Add InterruptVector type src/arch/sparc/interrupts.hh: rework interrupts. They are no longer cleared when created... A I/O or ASI read/write needs to happen before they are cleared src/arch/sparc/isa_traits.hh: Add the "interrupt" trap types to isa traits src/arch/sparc/miscregfile.cc: add names for all the misc registers and possible post an interrupt when TL is changed. src/arch/sparc/miscregfile.hh: Add a helper function to post an interrupt when pil < some set softint src/arch/sparc/regfile.cc: src/arch/sparc/regfile.hh: InterruptLevel shouldn't really live here, moved to interrupt.hh src/arch/sparc/tlb.cc: Add interrupt ASIs to TLB src/arch/sparc/ua2005.cc: Add checkSoftInt to check if a softint needs to be posted Check that a tickCompare isn't scheduled before scheduling one Post and clear interrupts on queue writes and what not src/base/bitfield.hh: Add an helper function to return the msb that is set src/cpu/base.cc: src/cpu/base.hh: get rid of post_interrupt(type) since it's no longer needed.. Add a way to see what interrupts are pending src/cpu/intr_control.cc: src/cpu/intr_control.hh: src/dev/alpha/tsunami_cchip.cc: src/python/m5/objects/IntrControl.py: Make IntrControl have a system pointer rather than using a cpu pointer to get one src/dev/sparc/SConscript: add iob to SConsscrip tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini: tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out: tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini: tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out: tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini: tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out: tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.ini: tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.out: tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini: tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.out: update config.ini/out for intrcntrl not having a cpu pointer anymore --HG-- extra : convert_revision : 38614f6b9ffc8f3c93949a94ff04b7d2987168dd
2007-03-03 23:22:47 +01:00
self.reset_bin = binary('reset_new.bin')
self.hypervisor_bin = binary('q_new.bin')
self.openboot_bin = binary('openboot_new.bin')
self.nvram_bin = binary('nvram1')
self.hypervisor_desc_bin = binary('1up-hv.bin')
self.partition_desc_bin = binary('1up-md.bin')
return self
def makeLinuxArmSystem(mem_mode, mdesc = None, bare_metal=False,
machine_type = None):
if bare_metal:
self = ArmSystem()
else:
self = LinuxArmSystem()
if not mdesc:
# generic system
mdesc = SysConfig()
self.readfile = mdesc.script()
self.iobus = Bus(bus_id=0)
self.membus = MemBus(bus_id=1)
self.membus.badaddr_responder.warn_access = "warn"
self.bridge = Bridge(delay='50ns', nack_delay='4ns')
self.physmem = PhysicalMemory(range = AddrRange(mdesc.mem()), zero = True)
self.diskmem = PhysicalMemory(range = AddrRange(Addr('128MB'), size = '128MB'),
file = disk('ael-arm.ext2'))
self.bridge.side_a = self.iobus.port
self.bridge.side_b = self.membus.port
self.physmem.port = self.membus.port
self.diskmem.port = self.membus.port
self.mem_mode = mem_mode
#self.cf0 = CowIdeDisk(driveID='master')
#self.cf0.childImage(mdesc.disk())
#self.cf_ctrl = IdeController(disks=[self.cf0],
# pci_func = 0, pci_dev = 0, pci_bus = 0,
# io_shift = 1, ctrl_offset = 2, Command = 0x1,
# BAR0 = 0x18000000, BAR0Size = '16B',
# BAR1 = 0x18000100, BAR1Size = '1B',
# BAR0LegacyIO = True, BAR1LegacyIO = True,)
#self.cf_ctrl.pio = self.iobus.port
if machine_type == "RealView_PBX":
self.realview = RealViewPBX()
elif machine_type == "RealView_EB":
self.realview = RealViewEB()
else:
print "Unknown Machine Type"
sys.exit(1)
if not bare_metal and machine_type:
self.machine_type = machine_type
elif bare_metal:
self.realview.uart.end_on_eot = True
self.realview.attachOnChipIO(self.membus)
self.realview.attachIO(self.iobus)
self.intrctrl = IntrControl()
self.terminal = Terminal()
self.kernel = binary('vmlinux.arm')
self.boot_osflags = 'earlyprintk mem=128MB console=ttyAMA0 lpj=19988480' + \
' norandmaps slram=slram0,0x8000000,+0x8000000' + \
' mtdparts=slram0:- rw loglevel=8 root=/dev/mtdblock0'
return self
def makeLinuxMipsSystem(mem_mode, mdesc = None):
class BaseMalta(Malta):
ethernet = NSGigE(pci_bus=0, pci_dev=1, pci_func=0)
ide = IdeController(disks=[Parent.disk0, Parent.disk2],
pci_func=0, pci_dev=0, pci_bus=0)
self = LinuxMipsSystem()
if not mdesc:
# generic system
mdesc = SysConfig()
self.readfile = mdesc.script()
self.iobus = Bus(bus_id=0)
self.membus = MemBus(bus_id=1)
self.bridge = Bridge(delay='50ns', nack_delay='4ns')
self.physmem = PhysicalMemory(range = AddrRange('1GB'))
self.bridge.side_a = self.iobus.port
self.bridge.side_b = self.membus.port
self.physmem.port = self.membus.port
self.disk0 = CowIdeDisk(driveID='master')
self.disk2 = CowIdeDisk(driveID='master')
self.disk0.childImage(mdesc.disk())
self.disk2.childImage(disk('linux-bigswap2.img'))
self.malta = BaseMalta()
self.malta.attachIO(self.iobus)
self.malta.ide.pio = self.iobus.port
self.malta.ethernet.pio = self.iobus.port
self.simple_disk = SimpleDisk(disk=RawDiskImage(image_file = mdesc.disk(),
read_only = True))
self.intrctrl = IntrControl()
self.mem_mode = mem_mode
self.terminal = Terminal()
self.kernel = binary('mips/vmlinux')
self.console = binary('mips/console')
self.boot_osflags = 'root=/dev/hda1 console=ttyS0'
return self
def x86IOAddress(port):
IO_address_space_base = 0x8000000000000000
return IO_address_space_base + port;
def makeX86System(mem_mode, numCPUs = 1, mdesc = None, self = None):
if self == None:
self = X86System()
if not mdesc:
# generic system
mdesc = SysConfig()
2009-02-01 09:24:26 +01:00
mdesc.diskname = 'x86root.img'
self.readfile = mdesc.script()
self.mem_mode = mem_mode
# Physical memory
self.membus = MemBus(bus_id=1)
self.physmem = PhysicalMemory(range = AddrRange(mdesc.mem()))
self.physmem.port = self.membus.port
# North Bridge
self.iobus = Bus(bus_id=0)
self.bridge = Bridge(delay='50ns', nack_delay='4ns')
self.bridge.side_a = self.iobus.port
self.bridge.side_b = self.membus.port
# Platform
self.pc = Pc()
self.pc.attachIO(self.iobus)
self.intrctrl = IntrControl()
2009-02-01 09:24:26 +01:00
# Disks
disk0 = CowIdeDisk(driveID='master')
disk2 = CowIdeDisk(driveID='master')
disk0.childImage(mdesc.disk())
disk2.childImage(disk('linux-bigswap2.img'))
self.pc.south_bridge.ide.disks = [disk0, disk2]
# Add in a Bios information structure.
structures = [X86SMBiosBiosInformation()]
self.smbios_table.structures = structures
# Set up the Intel MP table
for i in xrange(numCPUs):
bp = X86IntelMPProcessor(
local_apic_id = i,
local_apic_version = 0x14,
enable = True,
bootstrap = (i == 0))
self.intel_mp_table.add_entry(bp)
io_apic = X86IntelMPIOAPIC(
id = numCPUs,
version = 0x11,
enable = True,
address = 0xfec00000)
self.pc.south_bridge.io_apic.apic_id = io_apic.id
self.intel_mp_table.add_entry(io_apic)
isa_bus = X86IntelMPBus(bus_id = 0, bus_type='ISA')
self.intel_mp_table.add_entry(isa_bus)
pci_bus = X86IntelMPBus(bus_id = 1, bus_type='PCI')
self.intel_mp_table.add_entry(pci_bus)
connect_busses = X86IntelMPBusHierarchy(bus_id=0,
subtractive_decode=True, parent_bus=1)
self.intel_mp_table.add_entry(connect_busses)
pci_dev4_inta = X86IntelMPIOIntAssignment(
interrupt_type = 'INT',
polarity = 'ConformPolarity',
trigger = 'ConformTrigger',
source_bus_id = 1,
source_bus_irq = 0 + (4 << 2),
dest_io_apic_id = io_apic.id,
dest_io_apic_intin = 16)
self.intel_mp_table.add_entry(pci_dev4_inta);
def assignISAInt(irq, apicPin):
assign_8259_to_apic = X86IntelMPIOIntAssignment(
interrupt_type = 'ExtInt',
polarity = 'ConformPolarity',
trigger = 'ConformTrigger',
source_bus_id = 0,
source_bus_irq = irq,
dest_io_apic_id = io_apic.id,
dest_io_apic_intin = 0)
self.intel_mp_table.add_entry(assign_8259_to_apic)
assign_to_apic = X86IntelMPIOIntAssignment(
interrupt_type = 'INT',
polarity = 'ConformPolarity',
trigger = 'ConformTrigger',
source_bus_id = 0,
source_bus_irq = irq,
dest_io_apic_id = io_apic.id,
dest_io_apic_intin = apicPin)
self.intel_mp_table.add_entry(assign_to_apic)
assignISAInt(0, 2)
assignISAInt(1, 1)
for i in range(3, 15):
assignISAInt(i, i)
def makeLinuxX86System(mem_mode, numCPUs = 1, mdesc = None):
self = LinuxX86System()
# Build up a generic x86 system and then specialize it for Linux
makeX86System(mem_mode, numCPUs, mdesc, self)
# We assume below that there's at least 1MB of memory. We'll require 2
# just to avoid corner cases.
assert(self.physmem.range.second.getValue() >= 0x200000)
# Mark the first megabyte of memory as reserved
self.e820_table.entries.append(X86E820Entry(
addr = 0,
size = '1MB',
range_type = 2))
# Mark the rest as available
self.e820_table.entries.append(X86E820Entry(
addr = 0x100000,
size = '%dB' % (self.physmem.range.second - 0x100000 + 1),
range_type = 1))
# Command line
self.boot_osflags = 'earlyprintk=ttyS0 console=ttyS0 lpj=7999923 ' + \
'root=/dev/hda1'
return self
def makeDualRoot(testSystem, driveSystem, dumpfile):
self = Root()
self.testsys = testSystem
self.drivesys = driveSystem
self.etherlink = EtherLink()
self.etherlink.int0 = Parent.testsys.tsunami.ethernet.interface
self.etherlink.int1 = Parent.drivesys.tsunami.ethernet.interface
if dumpfile:
self.etherdump = EtherDump(file=dumpfile)
self.etherlink.dump = Parent.etherdump
return self
def setMipsOptions(TestCPUClass):
#CP0 Configuration
TestCPUClass.CoreParams.CP0_PRId_CompanyOptions = 0
TestCPUClass.CoreParams.CP0_PRId_CompanyID = 1
TestCPUClass.CoreParams.CP0_PRId_ProcessorID = 147
TestCPUClass.CoreParams.CP0_PRId_Revision = 0
#CP0 Interrupt Control
TestCPUClass.CoreParams.CP0_IntCtl_IPTI = 7
TestCPUClass.CoreParams.CP0_IntCtl_IPPCI = 7
# Config Register
#TestCPUClass.CoreParams.CP0_Config_K23 = 0 # Since TLB
#TestCPUClass.CoreParams.CP0_Config_KU = 0 # Since TLB
TestCPUClass.CoreParams.CP0_Config_BE = 0 # Little Endian
TestCPUClass.CoreParams.CP0_Config_AR = 1 # Architecture Revision 2
TestCPUClass.CoreParams.CP0_Config_AT = 0 # MIPS32
TestCPUClass.CoreParams.CP0_Config_MT = 1 # TLB MMU
#TestCPUClass.CoreParams.CP0_Config_K0 = 2 # Uncached
#Config 1 Register
TestCPUClass.CoreParams.CP0_Config1_M = 1 # Config2 Implemented
TestCPUClass.CoreParams.CP0_Config1_MMU = 63 # TLB Size
# ***VERY IMPORTANT***
# Remember to modify CP0_Config1 according to cache specs
# Examine file ../common/Cache.py
TestCPUClass.CoreParams.CP0_Config1_IS = 1 # I-Cache Sets Per Way, 16KB cache, i.e., 1 (128)
TestCPUClass.CoreParams.CP0_Config1_IL = 5 # I-Cache Line Size, default in Cache.py is 64, i.e 5
TestCPUClass.CoreParams.CP0_Config1_IA = 1 # I-Cache Associativity, default in Cache.py is 2, i.e, a value of 1
TestCPUClass.CoreParams.CP0_Config1_DS = 2 # D-Cache Sets Per Way (see below), 32KB cache, i.e., 2
TestCPUClass.CoreParams.CP0_Config1_DL = 5 # D-Cache Line Size, default is 64, i.e., 5
TestCPUClass.CoreParams.CP0_Config1_DA = 1 # D-Cache Associativity, default is 2, i.e. 1
TestCPUClass.CoreParams.CP0_Config1_C2 = 0 # Coprocessor 2 not implemented(?)
TestCPUClass.CoreParams.CP0_Config1_MD = 0 # MDMX ASE not implemented in Mips32
TestCPUClass.CoreParams.CP0_Config1_PC = 1 # Performance Counters Implemented
TestCPUClass.CoreParams.CP0_Config1_WR = 0 # Watch Registers Implemented
TestCPUClass.CoreParams.CP0_Config1_CA = 0 # Mips16e NOT implemented
TestCPUClass.CoreParams.CP0_Config1_EP = 0 # EJTag Not Implemented
TestCPUClass.CoreParams.CP0_Config1_FP = 0 # FPU Implemented
#Config 2 Register
TestCPUClass.CoreParams.CP0_Config2_M = 1 # Config3 Implemented
TestCPUClass.CoreParams.CP0_Config2_TU = 0 # Tertiary Cache Control
TestCPUClass.CoreParams.CP0_Config2_TS = 0 # Tertiary Cache Sets Per Way
TestCPUClass.CoreParams.CP0_Config2_TL = 0 # Tertiary Cache Line Size
TestCPUClass.CoreParams.CP0_Config2_TA = 0 # Tertiary Cache Associativity
TestCPUClass.CoreParams.CP0_Config2_SU = 0 # Secondary Cache Control
TestCPUClass.CoreParams.CP0_Config2_SS = 0 # Secondary Cache Sets Per Way
TestCPUClass.CoreParams.CP0_Config2_SL = 0 # Secondary Cache Line Size
TestCPUClass.CoreParams.CP0_Config2_SA = 0 # Secondary Cache Associativity
#Config 3 Register
TestCPUClass.CoreParams.CP0_Config3_M = 0 # Config4 Not Implemented
TestCPUClass.CoreParams.CP0_Config3_DSPP = 1 # DSP ASE Present
TestCPUClass.CoreParams.CP0_Config3_LPA = 0 # Large Physical Addresses Not supported in Mips32
TestCPUClass.CoreParams.CP0_Config3_VEIC = 0 # EIC Supported
TestCPUClass.CoreParams.CP0_Config3_VInt = 0 # Vectored Interrupts Implemented
TestCPUClass.CoreParams.CP0_Config3_SP = 0 # Small Pages Supported (PageGrain reg. exists)
TestCPUClass.CoreParams.CP0_Config3_MT = 0 # MT Not present
TestCPUClass.CoreParams.CP0_Config3_SM = 0 # SmartMIPS ASE Not implemented
TestCPUClass.CoreParams.CP0_Config3_TL = 0 # TraceLogic Not implemented
#SRS Ctl - HSS
TestCPUClass.CoreParams.CP0_SrsCtl_HSS = 3 # Four shadow register sets implemented
#TestCPUClass.CoreParams.tlb = TLB()
#TestCPUClass.CoreParams.UnifiedTLB = 1