gem5/src/mem/bus.cc

642 lines
20 KiB
C++
Raw Normal View History

/*
* Copyright (c) 2006 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Ali Saidi
*/
/**
* @file
* Definition of a bus object.
*/
More major reorg of cache. Seems to work for atomic mode now, timing mode still broken. configs/example/memtest.py: Revamp options. src/cpu/memtest/memtest.cc: No need for memory initialization. No need to make atomic response... memory system should do that now. src/cpu/memtest/memtest.hh: MemTest really doesn't want to snoop. src/mem/bridge.cc: checkFunctional() cleanup. src/mem/bus.cc: src/mem/bus.hh: src/mem/cache/base_cache.cc: src/mem/cache/base_cache.hh: src/mem/cache/cache.cc: src/mem/cache/cache.hh: src/mem/cache/cache_blk.hh: src/mem/cache/cache_builder.cc: src/mem/cache/cache_impl.hh: src/mem/cache/coherence/coherence_protocol.cc: src/mem/cache/coherence/coherence_protocol.hh: src/mem/cache/coherence/simple_coherence.hh: src/mem/cache/miss/SConscript: src/mem/cache/miss/mshr.cc: src/mem/cache/miss/mshr.hh: src/mem/cache/miss/mshr_queue.cc: src/mem/cache/miss/mshr_queue.hh: src/mem/cache/prefetch/base_prefetcher.cc: src/mem/cache/tags/fa_lru.cc: src/mem/cache/tags/fa_lru.hh: src/mem/cache/tags/iic.cc: src/mem/cache/tags/iic.hh: src/mem/cache/tags/lru.cc: src/mem/cache/tags/lru.hh: src/mem/cache/tags/split.cc: src/mem/cache/tags/split.hh: src/mem/cache/tags/split_lifo.cc: src/mem/cache/tags/split_lifo.hh: src/mem/cache/tags/split_lru.cc: src/mem/cache/tags/split_lru.hh: src/mem/packet.cc: src/mem/packet.hh: src/mem/physical.cc: src/mem/physical.hh: src/mem/tport.cc: More major reorg. Seems to work for atomic mode now, timing mode still broken. --HG-- extra : convert_revision : 7e70dfc4a752393b911880ff028271433855ae87
2007-06-18 02:27:53 +02:00
#include <algorithm>
#include <limits>
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
#include "base/misc.hh"
#include "base/trace.hh"
#include "mem/bus.hh"
#include "sim/builder.hh"
Port *
Move SimObject creation and Port connection loops into Python. Add Port and VectorPort objects and support for specifying port connections via assignment. The whole C++ ConfigNode hierarchy is gone now, as are C++ Connector objects. configs/test/fs.py: configs/test/test.py: Rewrite for new port connector syntax. src/SConscript: Remove unneeded files: - mem/connector.* - sim/config* src/dev/io_device.hh: src/mem/bridge.cc: src/mem/bridge.hh: src/mem/bus.cc: src/mem/bus.hh: src/mem/mem_object.hh: src/mem/physical.cc: src/mem/physical.hh: Allow getPort() to take an optional index to support vector ports (eventually). src/python/m5/__init__.py: Move SimObject construction and port connection operations into Python (with C++ calls). src/python/m5/config.py: Move SimObject construction and port connection operations into Python (with C++ calls). Add support for declaring and connecting MemObject ports in Python. src/python/m5/objects/Bus.py: src/python/m5/objects/PhysicalMemory.py: Add port declaration. src/sim/builder.cc: src/sim/builder.hh: src/sim/serialize.cc: src/sim/serialize.hh: ConfigNodes are gone; builder just gets the name of a .ini file section now. src/sim/main.cc: Move SimObject construction and port connection operations into Python (with C++ calls). Split remaining initialization operations into two parts, loadIniFile() and finalInit(). src/sim/param.cc: src/sim/param.hh: SimObject resolution done globally in Python now (not via ConfigNode hierarchy). src/sim/sim_object.cc: Remove unneeded #include. --HG-- extra : convert_revision : 2fa4001eaaec0c9a4231ef6e854f8e156d930dfe
2006-06-14 05:19:28 +02:00
Bus::getPort(const std::string &if_name, int idx)
{
if (if_name == "default") {
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
if (defaultPort == NULL) {
defaultPort = new BusPort(csprintf("%s-default",name()), this,
defaultId);
cachedBlockSizeValid = false;
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
return defaultPort;
} else
fatal("Default port already set\n");
}
int id;
if (if_name == "functional") {
if (!funcPort) {
id = maxId++;
funcPort = new BusPort(csprintf("%s-p%d-func", name(), id), this, id);
funcPortId = id;
interfaces[id] = funcPort;
}
return funcPort;
}
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
// if_name ignored? forced to be empty?
id = maxId++;
assert(maxId < std::numeric_limits<typeof(maxId)>::max());
BusPort *bp = new BusPort(csprintf("%s-p%d", name(), id), this, id);
interfaces[id] = bp;
cachedBlockSizeValid = false;
return bp;
}
void
Bus::deletePortRefs(Port *p)
{
BusPort *bp = dynamic_cast<BusPort*>(p);
if (bp == NULL)
panic("Couldn't convert Port* to BusPort*\n");
// If this is our one functional port
if (funcPort == bp)
return;
interfaces.erase(bp->getId());
delete bp;
}
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
/** Get the ranges of anyone other buses that we are connected to. */
void
Bus::init()
{
m5::hash_map<short,BusPort*>::iterator intIter;
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
for (intIter = interfaces.begin(); intIter != interfaces.end(); intIter++)
intIter->second->sendStatusChange(Port::RangeChange);
}
Bus::BusFreeEvent::BusFreeEvent(Bus *_bus) : Event(&mainEventQueue), bus(_bus)
{}
void Bus::BusFreeEvent::process()
{
bus->recvRetry(-1);
}
const char * Bus::BusFreeEvent::description()
{
return "bus became available";
}
void Bus::occupyBus(PacketPtr pkt)
{
//Bring tickNextIdle up to the present tick
//There is some potential ambiguity where a cycle starts, which might make
//a difference when devices are acting right around a cycle boundary. Using
//a < allows things which happen exactly on a cycle boundary to take up
//only the following cycle. Anything that happens later will have to "wait"
//for the end of that cycle, and then start using the bus after that.
if (tickNextIdle < curTick) {
tickNextIdle = curTick;
if (tickNextIdle % clock != 0)
tickNextIdle = curTick - (curTick % clock) + clock;
}
// The packet will be sent. Figure out how long it occupies the bus, and
// how much of that time is for the first "word", aka bus width.
int numCycles = 0;
// Requests need one cycle to send an address
if (pkt->isRequest())
numCycles++;
else if (pkt->isResponse() || pkt->hasData()) {
// If a packet has data, it needs ceil(size/width) cycles to send it
// We're using the "adding instead of dividing" trick again here
if (pkt->hasData()) {
int dataSize = pkt->getSize();
numCycles += dataSize/width;
if (dataSize % width)
numCycles++;
} else {
// If the packet didn't have data, it must have been a response.
// Those use the bus for one cycle to send their data.
numCycles++;
}
}
// The first word will be delivered after the current tick, the delivery
// of the address if any, and one bus cycle to deliver the data
pkt->firstWordTime =
tickNextIdle +
pkt->isRequest() ? clock : 0 +
clock;
//Advance it numCycles bus cycles.
//XXX Should this use the repeated addition trick as well?
tickNextIdle += (numCycles * clock);
if (!busIdle.scheduled()) {
busIdle.schedule(tickNextIdle);
} else {
busIdle.reschedule(tickNextIdle);
}
DPRINTF(Bus, "The bus is now occupied from tick %d to %d\n",
curTick, tickNextIdle);
// The bus will become idle once the current packet is delivered.
pkt->finishTime = tickNextIdle;
}
/** Function called by the port when the bus is receiving a Timing
* transaction.*/
bool
Bus::recvTiming(PacketPtr pkt)
{
Port *port;
DPRINTF(Bus, "recvTiming: packet src %d dest %d addr 0x%x cmd %s\n",
pkt->getSrc(), pkt->getDest(), pkt->getAddr(), pkt->cmdString());
BusPort *pktPort;
if (pkt->getSrc() == defaultId)
pktPort = defaultPort;
else pktPort = interfaces[pkt->getSrc()];
// If the bus is busy, or other devices are in line ahead of the current
// one, put this device on the retry list.
if (tickNextIdle > curTick ||
(retryList.size() && (!inRetry || pktPort != retryList.front())))
{
addToRetryList(pktPort);
DPRINTF(Bus, "recvTiming: Bus is busy, returning false\n");
return false;
}
short dest = pkt->getDest();
// Make sure to clear the snoop commit flag so it doesn't think an
// access has been handled twice.
if (dest == Packet::Broadcast) {
port = findPort(pkt->getAddr(), pkt->getSrc());
timingSnoop(pkt, port ? port : interfaces[pkt->getSrc()]);
More major reorg of cache. Seems to work for atomic mode now, timing mode still broken. configs/example/memtest.py: Revamp options. src/cpu/memtest/memtest.cc: No need for memory initialization. No need to make atomic response... memory system should do that now. src/cpu/memtest/memtest.hh: MemTest really doesn't want to snoop. src/mem/bridge.cc: checkFunctional() cleanup. src/mem/bus.cc: src/mem/bus.hh: src/mem/cache/base_cache.cc: src/mem/cache/base_cache.hh: src/mem/cache/cache.cc: src/mem/cache/cache.hh: src/mem/cache/cache_blk.hh: src/mem/cache/cache_builder.cc: src/mem/cache/cache_impl.hh: src/mem/cache/coherence/coherence_protocol.cc: src/mem/cache/coherence/coherence_protocol.hh: src/mem/cache/coherence/simple_coherence.hh: src/mem/cache/miss/SConscript: src/mem/cache/miss/mshr.cc: src/mem/cache/miss/mshr.hh: src/mem/cache/miss/mshr_queue.cc: src/mem/cache/miss/mshr_queue.hh: src/mem/cache/prefetch/base_prefetcher.cc: src/mem/cache/tags/fa_lru.cc: src/mem/cache/tags/fa_lru.hh: src/mem/cache/tags/iic.cc: src/mem/cache/tags/iic.hh: src/mem/cache/tags/lru.cc: src/mem/cache/tags/lru.hh: src/mem/cache/tags/split.cc: src/mem/cache/tags/split.hh: src/mem/cache/tags/split_lifo.cc: src/mem/cache/tags/split_lifo.hh: src/mem/cache/tags/split_lru.cc: src/mem/cache/tags/split_lru.hh: src/mem/packet.cc: src/mem/packet.hh: src/mem/physical.cc: src/mem/physical.hh: src/mem/tport.cc: More major reorg. Seems to work for atomic mode now, timing mode still broken. --HG-- extra : convert_revision : 7e70dfc4a752393b911880ff028271433855ae87
2007-06-18 02:27:53 +02:00
if (pkt->memInhibitAsserted()) {
//Cache-Cache transfer occuring
if (inRetry) {
retryList.front()->onRetryList(false);
retryList.pop_front();
inRetry = false;
}
occupyBus(pkt);
DPRINTF(Bus, "recvTiming: Packet sucessfully sent\n");
return true;
}
} else {
assert(dest >= 0 && dest < maxId);
assert(dest != pkt->getSrc()); // catch infinite loops
port = interfaces[dest];
}
occupyBus(pkt);
if (port) {
if (port->sendTiming(pkt)) {
// Packet was successfully sent. Return true.
// Also take care of retries
if (inRetry) {
DPRINTF(Bus, "Remove retry from list %d\n",
retryList.front()->getId());
retryList.front()->onRetryList(false);
retryList.pop_front();
inRetry = false;
}
return true;
}
// Packet not successfully sent. Leave or put it on the retry list.
DPRINTF(Bus, "Adding2 a retry to RETRY list %d\n",
pktPort->getId());
addToRetryList(pktPort);
return false;
}
else {
//Forwarding up from responder, just return true;
DPRINTF(Bus, "recvTiming: can we be here?\n");
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
return true;
}
}
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
void
Bus::recvRetry(int id)
{
DPRINTF(Bus, "Received a retry from %s\n", id == -1 ? "self" : interfaces[id]->getPeer()->name());
// If there's anything waiting, and the bus isn't busy...
if (retryList.size() && curTick >= tickNextIdle) {
//retryingPort = retryList.front();
inRetry = true;
DPRINTF(Bus, "Sending a retry to %s\n", retryList.front()->getPeer()->name());
retryList.front()->sendRetry();
// If inRetry is still true, sendTiming wasn't called
if (inRetry)
{
retryList.front()->onRetryList(false);
retryList.pop_front();
inRetry = false;
//Bring tickNextIdle up to the present
while (tickNextIdle < curTick)
tickNextIdle += clock;
//Burn a cycle for the missed grant.
tickNextIdle += clock;
busIdle.reschedule(tickNextIdle, true);
}
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
}
//If we weren't able to drain before, we might be able to now.
if (drainEvent && retryList.size() == 0 && curTick >= tickNextIdle) {
drainEvent->process();
// Clear the drain event once we're done with it.
drainEvent = NULL;
}
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
}
Port *
Bus::findPort(Addr addr, int id)
{
/* An interval tree would be a better way to do this. --ali. */
int dest_id = -1;
PortIter i = portMap.find(RangeSize(addr,1));
if (i != portMap.end())
dest_id = i->second;
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
// Check if this matches the default range
if (dest_id == -1) {
for (AddrRangeIter iter = defaultRange.begin();
iter != defaultRange.end(); iter++) {
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
if (*iter == addr) {
DPRINTF(Bus, " found addr %#llx on default\n", addr);
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
return defaultPort;
}
}
if (responderSet) {
panic("Unable to find destination for addr (user set default "
"responder): %#llx", addr);
} else {
DPRINTF(Bus, "Unable to find destination for addr: %#llx, will use "
"default port", addr);
return defaultPort;
}
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
}
// we shouldn't be sending this back to where it came from
// do the snoop access and then we should terminate
// the cyclical call.
if (dest_id == id)
return 0;
return interfaces[dest_id];
}
void
Bus::functionalSnoop(PacketPtr pkt, Port *responder)
{
// The packet may be changed by another bus on snoops, restore the
// id after each
int src_id = pkt->getSrc();
assert(pkt->isRequest()); // hasn't already been satisfied
for (SnoopIter s_iter = snoopPorts.begin();
s_iter != snoopPorts.end();
s_iter++) {
BusPort *p = *s_iter;
if (p != responder && p->getId() != src_id) {
p->sendFunctional(pkt);
}
if (pkt->isResponse()) {
break;
}
pkt->setSrc(src_id);
}
}
bool
Bus::timingSnoop(PacketPtr pkt, Port* responder)
{
for (SnoopIter s_iter = snoopPorts.begin();
s_iter != snoopPorts.end();
s_iter++) {
BusPort *p = *s_iter;
if (p != responder && p->getId() != pkt->getSrc()) {
bool success = p->sendTiming(pkt);
if (!success)
return false;
}
}
return true;
}
/** Function called by the port when the bus is receiving a Atomic
* transaction.*/
Tick
Bus::recvAtomic(PacketPtr pkt)
{
DPRINTF(Bus, "recvAtomic: packet src %d dest %d addr 0x%x cmd %s\n",
pkt->getSrc(), pkt->getDest(), pkt->getAddr(), pkt->cmdString());
assert(pkt->getDest() == Packet::Broadcast);
assert(pkt->isRequest());
More major reorg of cache. Seems to work for atomic mode now, timing mode still broken. configs/example/memtest.py: Revamp options. src/cpu/memtest/memtest.cc: No need for memory initialization. No need to make atomic response... memory system should do that now. src/cpu/memtest/memtest.hh: MemTest really doesn't want to snoop. src/mem/bridge.cc: checkFunctional() cleanup. src/mem/bus.cc: src/mem/bus.hh: src/mem/cache/base_cache.cc: src/mem/cache/base_cache.hh: src/mem/cache/cache.cc: src/mem/cache/cache.hh: src/mem/cache/cache_blk.hh: src/mem/cache/cache_builder.cc: src/mem/cache/cache_impl.hh: src/mem/cache/coherence/coherence_protocol.cc: src/mem/cache/coherence/coherence_protocol.hh: src/mem/cache/coherence/simple_coherence.hh: src/mem/cache/miss/SConscript: src/mem/cache/miss/mshr.cc: src/mem/cache/miss/mshr.hh: src/mem/cache/miss/mshr_queue.cc: src/mem/cache/miss/mshr_queue.hh: src/mem/cache/prefetch/base_prefetcher.cc: src/mem/cache/tags/fa_lru.cc: src/mem/cache/tags/fa_lru.hh: src/mem/cache/tags/iic.cc: src/mem/cache/tags/iic.hh: src/mem/cache/tags/lru.cc: src/mem/cache/tags/lru.hh: src/mem/cache/tags/split.cc: src/mem/cache/tags/split.hh: src/mem/cache/tags/split_lifo.cc: src/mem/cache/tags/split_lifo.hh: src/mem/cache/tags/split_lru.cc: src/mem/cache/tags/split_lru.hh: src/mem/packet.cc: src/mem/packet.hh: src/mem/physical.cc: src/mem/physical.hh: src/mem/tport.cc: More major reorg. Seems to work for atomic mode now, timing mode still broken. --HG-- extra : convert_revision : 7e70dfc4a752393b911880ff028271433855ae87
2007-06-18 02:27:53 +02:00
// Variables for recording original command and snoop response (if
// any)... if a snooper respondes, we will need to restore
// original command so that additional snoops can take place
// properly
MemCmd orig_cmd = pkt->cmd;
MemCmd response_cmd = MemCmd::InvalidCmd;
int orig_src = pkt->getSrc();
More major reorg of cache. Seems to work for atomic mode now, timing mode still broken. configs/example/memtest.py: Revamp options. src/cpu/memtest/memtest.cc: No need for memory initialization. No need to make atomic response... memory system should do that now. src/cpu/memtest/memtest.hh: MemTest really doesn't want to snoop. src/mem/bridge.cc: checkFunctional() cleanup. src/mem/bus.cc: src/mem/bus.hh: src/mem/cache/base_cache.cc: src/mem/cache/base_cache.hh: src/mem/cache/cache.cc: src/mem/cache/cache.hh: src/mem/cache/cache_blk.hh: src/mem/cache/cache_builder.cc: src/mem/cache/cache_impl.hh: src/mem/cache/coherence/coherence_protocol.cc: src/mem/cache/coherence/coherence_protocol.hh: src/mem/cache/coherence/simple_coherence.hh: src/mem/cache/miss/SConscript: src/mem/cache/miss/mshr.cc: src/mem/cache/miss/mshr.hh: src/mem/cache/miss/mshr_queue.cc: src/mem/cache/miss/mshr_queue.hh: src/mem/cache/prefetch/base_prefetcher.cc: src/mem/cache/tags/fa_lru.cc: src/mem/cache/tags/fa_lru.hh: src/mem/cache/tags/iic.cc: src/mem/cache/tags/iic.hh: src/mem/cache/tags/lru.cc: src/mem/cache/tags/lru.hh: src/mem/cache/tags/split.cc: src/mem/cache/tags/split.hh: src/mem/cache/tags/split_lifo.cc: src/mem/cache/tags/split_lifo.hh: src/mem/cache/tags/split_lru.cc: src/mem/cache/tags/split_lru.hh: src/mem/packet.cc: src/mem/packet.hh: src/mem/physical.cc: src/mem/physical.hh: src/mem/tport.cc: More major reorg. Seems to work for atomic mode now, timing mode still broken. --HG-- extra : convert_revision : 7e70dfc4a752393b911880ff028271433855ae87
2007-06-18 02:27:53 +02:00
Port *target_port = findPort(pkt->getAddr(), pkt->getSrc());
More major reorg of cache. Seems to work for atomic mode now, timing mode still broken. configs/example/memtest.py: Revamp options. src/cpu/memtest/memtest.cc: No need for memory initialization. No need to make atomic response... memory system should do that now. src/cpu/memtest/memtest.hh: MemTest really doesn't want to snoop. src/mem/bridge.cc: checkFunctional() cleanup. src/mem/bus.cc: src/mem/bus.hh: src/mem/cache/base_cache.cc: src/mem/cache/base_cache.hh: src/mem/cache/cache.cc: src/mem/cache/cache.hh: src/mem/cache/cache_blk.hh: src/mem/cache/cache_builder.cc: src/mem/cache/cache_impl.hh: src/mem/cache/coherence/coherence_protocol.cc: src/mem/cache/coherence/coherence_protocol.hh: src/mem/cache/coherence/simple_coherence.hh: src/mem/cache/miss/SConscript: src/mem/cache/miss/mshr.cc: src/mem/cache/miss/mshr.hh: src/mem/cache/miss/mshr_queue.cc: src/mem/cache/miss/mshr_queue.hh: src/mem/cache/prefetch/base_prefetcher.cc: src/mem/cache/tags/fa_lru.cc: src/mem/cache/tags/fa_lru.hh: src/mem/cache/tags/iic.cc: src/mem/cache/tags/iic.hh: src/mem/cache/tags/lru.cc: src/mem/cache/tags/lru.hh: src/mem/cache/tags/split.cc: src/mem/cache/tags/split.hh: src/mem/cache/tags/split_lifo.cc: src/mem/cache/tags/split_lifo.hh: src/mem/cache/tags/split_lru.cc: src/mem/cache/tags/split_lru.hh: src/mem/packet.cc: src/mem/packet.hh: src/mem/physical.cc: src/mem/physical.hh: src/mem/tport.cc: More major reorg. Seems to work for atomic mode now, timing mode still broken. --HG-- extra : convert_revision : 7e70dfc4a752393b911880ff028271433855ae87
2007-06-18 02:27:53 +02:00
SnoopIter s_end = snoopPorts.end();
for (SnoopIter s_iter = snoopPorts.begin(); s_iter != s_end; s_iter++) {
BusPort *p = *s_iter;
// same port should not have both target addresses and snooping
assert(p != target_port);
if (p->getId() != pkt->getSrc()) {
p->sendAtomic(pkt);
if (pkt->isResponse()) {
More major reorg of cache. Seems to work for atomic mode now, timing mode still broken. configs/example/memtest.py: Revamp options. src/cpu/memtest/memtest.cc: No need for memory initialization. No need to make atomic response... memory system should do that now. src/cpu/memtest/memtest.hh: MemTest really doesn't want to snoop. src/mem/bridge.cc: checkFunctional() cleanup. src/mem/bus.cc: src/mem/bus.hh: src/mem/cache/base_cache.cc: src/mem/cache/base_cache.hh: src/mem/cache/cache.cc: src/mem/cache/cache.hh: src/mem/cache/cache_blk.hh: src/mem/cache/cache_builder.cc: src/mem/cache/cache_impl.hh: src/mem/cache/coherence/coherence_protocol.cc: src/mem/cache/coherence/coherence_protocol.hh: src/mem/cache/coherence/simple_coherence.hh: src/mem/cache/miss/SConscript: src/mem/cache/miss/mshr.cc: src/mem/cache/miss/mshr.hh: src/mem/cache/miss/mshr_queue.cc: src/mem/cache/miss/mshr_queue.hh: src/mem/cache/prefetch/base_prefetcher.cc: src/mem/cache/tags/fa_lru.cc: src/mem/cache/tags/fa_lru.hh: src/mem/cache/tags/iic.cc: src/mem/cache/tags/iic.hh: src/mem/cache/tags/lru.cc: src/mem/cache/tags/lru.hh: src/mem/cache/tags/split.cc: src/mem/cache/tags/split.hh: src/mem/cache/tags/split_lifo.cc: src/mem/cache/tags/split_lifo.hh: src/mem/cache/tags/split_lru.cc: src/mem/cache/tags/split_lru.hh: src/mem/packet.cc: src/mem/packet.hh: src/mem/physical.cc: src/mem/physical.hh: src/mem/tport.cc: More major reorg. Seems to work for atomic mode now, timing mode still broken. --HG-- extra : convert_revision : 7e70dfc4a752393b911880ff028271433855ae87
2007-06-18 02:27:53 +02:00
// response from snoop agent
assert(pkt->cmd != orig_cmd);
assert(pkt->memInhibitAsserted());
// should only happen once
assert(response_cmd == MemCmd::InvalidCmd);
// save response state
response_cmd = pkt->cmd;
// restore original packet state for remaining snoopers
pkt->cmd = orig_cmd;
pkt->setSrc(orig_src);
pkt->setDest(Packet::Broadcast);
More major reorg of cache. Seems to work for atomic mode now, timing mode still broken. configs/example/memtest.py: Revamp options. src/cpu/memtest/memtest.cc: No need for memory initialization. No need to make atomic response... memory system should do that now. src/cpu/memtest/memtest.hh: MemTest really doesn't want to snoop. src/mem/bridge.cc: checkFunctional() cleanup. src/mem/bus.cc: src/mem/bus.hh: src/mem/cache/base_cache.cc: src/mem/cache/base_cache.hh: src/mem/cache/cache.cc: src/mem/cache/cache.hh: src/mem/cache/cache_blk.hh: src/mem/cache/cache_builder.cc: src/mem/cache/cache_impl.hh: src/mem/cache/coherence/coherence_protocol.cc: src/mem/cache/coherence/coherence_protocol.hh: src/mem/cache/coherence/simple_coherence.hh: src/mem/cache/miss/SConscript: src/mem/cache/miss/mshr.cc: src/mem/cache/miss/mshr.hh: src/mem/cache/miss/mshr_queue.cc: src/mem/cache/miss/mshr_queue.hh: src/mem/cache/prefetch/base_prefetcher.cc: src/mem/cache/tags/fa_lru.cc: src/mem/cache/tags/fa_lru.hh: src/mem/cache/tags/iic.cc: src/mem/cache/tags/iic.hh: src/mem/cache/tags/lru.cc: src/mem/cache/tags/lru.hh: src/mem/cache/tags/split.cc: src/mem/cache/tags/split.hh: src/mem/cache/tags/split_lifo.cc: src/mem/cache/tags/split_lifo.hh: src/mem/cache/tags/split_lru.cc: src/mem/cache/tags/split_lru.hh: src/mem/packet.cc: src/mem/packet.hh: src/mem/physical.cc: src/mem/physical.hh: src/mem/tport.cc: More major reorg. Seems to work for atomic mode now, timing mode still broken. --HG-- extra : convert_revision : 7e70dfc4a752393b911880ff028271433855ae87
2007-06-18 02:27:53 +02:00
}
}
}
Tick response_time = target_port->sendAtomic(pkt);
// if we got a response from a snooper, restore it here
if (response_cmd != MemCmd::InvalidCmd) {
More major reorg of cache. Seems to work for atomic mode now, timing mode still broken. configs/example/memtest.py: Revamp options. src/cpu/memtest/memtest.cc: No need for memory initialization. No need to make atomic response... memory system should do that now. src/cpu/memtest/memtest.hh: MemTest really doesn't want to snoop. src/mem/bridge.cc: checkFunctional() cleanup. src/mem/bus.cc: src/mem/bus.hh: src/mem/cache/base_cache.cc: src/mem/cache/base_cache.hh: src/mem/cache/cache.cc: src/mem/cache/cache.hh: src/mem/cache/cache_blk.hh: src/mem/cache/cache_builder.cc: src/mem/cache/cache_impl.hh: src/mem/cache/coherence/coherence_protocol.cc: src/mem/cache/coherence/coherence_protocol.hh: src/mem/cache/coherence/simple_coherence.hh: src/mem/cache/miss/SConscript: src/mem/cache/miss/mshr.cc: src/mem/cache/miss/mshr.hh: src/mem/cache/miss/mshr_queue.cc: src/mem/cache/miss/mshr_queue.hh: src/mem/cache/prefetch/base_prefetcher.cc: src/mem/cache/tags/fa_lru.cc: src/mem/cache/tags/fa_lru.hh: src/mem/cache/tags/iic.cc: src/mem/cache/tags/iic.hh: src/mem/cache/tags/lru.cc: src/mem/cache/tags/lru.hh: src/mem/cache/tags/split.cc: src/mem/cache/tags/split.hh: src/mem/cache/tags/split_lifo.cc: src/mem/cache/tags/split_lifo.hh: src/mem/cache/tags/split_lru.cc: src/mem/cache/tags/split_lru.hh: src/mem/packet.cc: src/mem/packet.hh: src/mem/physical.cc: src/mem/physical.hh: src/mem/tport.cc: More major reorg. Seems to work for atomic mode now, timing mode still broken. --HG-- extra : convert_revision : 7e70dfc4a752393b911880ff028271433855ae87
2007-06-18 02:27:53 +02:00
// no one else should have responded
assert(!pkt->isResponse());
More major reorg of cache. Seems to work for atomic mode now, timing mode still broken. configs/example/memtest.py: Revamp options. src/cpu/memtest/memtest.cc: No need for memory initialization. No need to make atomic response... memory system should do that now. src/cpu/memtest/memtest.hh: MemTest really doesn't want to snoop. src/mem/bridge.cc: checkFunctional() cleanup. src/mem/bus.cc: src/mem/bus.hh: src/mem/cache/base_cache.cc: src/mem/cache/base_cache.hh: src/mem/cache/cache.cc: src/mem/cache/cache.hh: src/mem/cache/cache_blk.hh: src/mem/cache/cache_builder.cc: src/mem/cache/cache_impl.hh: src/mem/cache/coherence/coherence_protocol.cc: src/mem/cache/coherence/coherence_protocol.hh: src/mem/cache/coherence/simple_coherence.hh: src/mem/cache/miss/SConscript: src/mem/cache/miss/mshr.cc: src/mem/cache/miss/mshr.hh: src/mem/cache/miss/mshr_queue.cc: src/mem/cache/miss/mshr_queue.hh: src/mem/cache/prefetch/base_prefetcher.cc: src/mem/cache/tags/fa_lru.cc: src/mem/cache/tags/fa_lru.hh: src/mem/cache/tags/iic.cc: src/mem/cache/tags/iic.hh: src/mem/cache/tags/lru.cc: src/mem/cache/tags/lru.hh: src/mem/cache/tags/split.cc: src/mem/cache/tags/split.hh: src/mem/cache/tags/split_lifo.cc: src/mem/cache/tags/split_lifo.hh: src/mem/cache/tags/split_lru.cc: src/mem/cache/tags/split_lru.hh: src/mem/packet.cc: src/mem/packet.hh: src/mem/physical.cc: src/mem/physical.hh: src/mem/tport.cc: More major reorg. Seems to work for atomic mode now, timing mode still broken. --HG-- extra : convert_revision : 7e70dfc4a752393b911880ff028271433855ae87
2007-06-18 02:27:53 +02:00
assert(pkt->cmd == orig_cmd);
pkt->cmd = response_cmd;
}
// why do we have this packet field and the return value both???
pkt->finishTime = std::max(response_time, curTick + clock);
return pkt->finishTime;
}
/** Function called by the port when the bus is receiving a Functional
* transaction.*/
void
Bus::recvFunctional(PacketPtr pkt)
{
DPRINTF(Bus, "recvFunctional: packet src %d dest %d addr 0x%x cmd %s\n",
pkt->getSrc(), pkt->getDest(), pkt->getAddr(), pkt->cmdString());
assert(pkt->getDest() == Packet::Broadcast);
Port* port = findPort(pkt->getAddr(), pkt->getSrc());
functionalSnoop(pkt, port ? port : interfaces[pkt->getSrc()]);
// If the snooping hasn't found what we were looking for, keep going.
if (!pkt->isResponse() && port) {
port->sendFunctional(pkt);
}
}
/** Function called by the port when the bus is receiving a status change.*/
void
Bus::recvStatusChange(Port::Status status, int id)
{
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
AddrRangeList ranges;
bool snoops;
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
AddrRangeIter iter;
assert(status == Port::RangeChange &&
"The other statuses need to be implemented.");
DPRINTF(BusAddrRanges, "received RangeChange from device id %d\n", id);
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
if (id == defaultId) {
defaultRange.clear();
// Only try to update these ranges if the user set a default responder.
if (responderSet) {
defaultPort->getPeerAddressRanges(ranges, snoops);
assert(snoops == false);
for(iter = ranges.begin(); iter != ranges.end(); iter++) {
defaultRange.push_back(*iter);
DPRINTF(BusAddrRanges, "Adding range %#llx - %#llx for default range\n",
iter->start, iter->end);
}
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
}
} else {
assert((id < maxId && id >= 0) || id == defaultId);
BusPort *port = interfaces[id];
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
// Clean out any previously existent ids
for (PortIter portIter = portMap.begin();
portIter != portMap.end(); ) {
if (portIter->second == id)
portMap.erase(portIter++);
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
else
portIter++;
}
fixes for new memory system SConscript: comment out most devices add vport.cc arch/alpha/arguments.cc: arch/alpha/arguments.hh: push in alpha name space fix for new memory system arch/alpha/faults.cc: arch/alpha/faults.hh: Added an unimplemented fault that can be returned if a certain function isn't implemented arch/alpha/freebsd/system.cc: arch/alpha/linux/system.cc: arch/alpha/stacktrace.cc: arch/alpha/system.cc: arch/alpha/tlb.hh: arch/alpha/tru64/system.cc: fixed for new memory system arch/alpha/tlb.cc: fixed for new memory system removed code that seems to have no purpose arch/alpha/vtophys.cc: arch/alpha/vtophys.hh: fixed for new memory system put in namespace AlphaISA base/remote_gdb.cc: fix for new memory system cpu/cpu_exec_context.cc: cpu/cpu_exec_context.hh: cpu/exec_context.hh: create two ports one of physical accesses and one for superpage accesses Add functions getVirtPort() getPhysPort() delVirtPort(). To get statically allocated physical or virtual ports or if an execcontext is passed in get a dynamically allocated virtual port dev/alpha_console.cc: dev/alpha_console.hh: Redo for new memory system dev/io_device.cc: dev/io_device.hh: new I/O devices for new memory system kern/linux/events.cc: kern/linux/printk.cc: kern/linux/printk.hh: kern/tru64/dump_mbuf.hh: kern/tru64/printf.cc: kern/tru64/printf.hh: Arguments now in namespaces kern/tru64/tru64_events.cc: mem/bus.cc: fix for new memory syste mem/physical.hh: new addressranges function getPort should be public mem/port.hh: Add write/read methods to functional port update getDeviceAddrRanges to have a list of both snoops and response lists sim/pseudo_inst.cc: sim/system.cc: sim/system.hh: Update for new mem system sim/vptr.hh: comment out code and replace with panics This will need to be fixed at some point, but it's not easy. --HG-- extra : convert_revision : 41f41f422cfbab3751284d55cccb6ea64a7956e2
2006-04-06 06:51:46 +02:00
for (SnoopIter s_iter = snoopPorts.begin();
s_iter != snoopPorts.end(); ) {
if ((*s_iter)->getId() == id)
s_iter = snoopPorts.erase(s_iter);
else
s_iter++;
}
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
port->getPeerAddressRanges(ranges, snoops);
if (snoops) {
DPRINTF(BusAddrRanges, "Adding id %d to snoop list\n", id);
snoopPorts.push_back(port);
}
for (iter = ranges.begin(); iter != ranges.end(); iter++) {
DPRINTF(BusAddrRanges, "Adding range %#llx - %#llx for id %d\n",
iter->start, iter->end, id);
if (portMap.insert(*iter, id) == portMap.end())
panic("Two devices with same range\n");
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
}
}
DPRINTF(MMU, "port list has %d entries\n", portMap.size());
// tell all our peers that our address range has changed.
// Don't tell the device that caused this change, it already knows
m5::hash_map<short,BusPort*>::iterator intIter;
for (intIter = interfaces.begin(); intIter != interfaces.end(); intIter++)
if (intIter->first != id && intIter->first != funcPortId)
intIter->second->sendStatusChange(Port::RangeChange);
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
if (id != defaultId && defaultPort)
defaultPort->sendStatusChange(Port::RangeChange);
}
void
Bus::addressRanges(AddrRangeList &resp, bool &snoop, int id)
{
resp.clear();
snoop = false;
DPRINTF(BusAddrRanges, "received address range request, returning:\n");
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
for (AddrRangeIter dflt_iter = defaultRange.begin();
dflt_iter != defaultRange.end(); dflt_iter++) {
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
resp.push_back(*dflt_iter);
DPRINTF(BusAddrRanges, " -- Dflt: %#llx : %#llx\n",dflt_iter->start,
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
dflt_iter->end);
}
for (PortIter portIter = portMap.begin();
portIter != portMap.end(); portIter++) {
bool subset = false;
for (AddrRangeIter dflt_iter = defaultRange.begin();
dflt_iter != defaultRange.end(); dflt_iter++) {
if ((portIter->first.start < dflt_iter->start &&
portIter->first.end >= dflt_iter->start) ||
(portIter->first.start < dflt_iter->end &&
portIter->first.end >= dflt_iter->end))
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
fatal("Devices can not set ranges that itersect the default set\
but are not a subset of the default set.\n");
if (portIter->first.start >= dflt_iter->start &&
portIter->first.end <= dflt_iter->end) {
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
subset = true;
DPRINTF(BusAddrRanges, " -- %#llx : %#llx is a SUBSET\n",
portIter->first.start, portIter->first.end);
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
}
}
if (portIter->second != id && !subset) {
resp.push_back(portIter->first);
DPRINTF(BusAddrRanges, " -- %#llx : %#llx\n",
portIter->first.start, portIter->first.end);
}
}
for (SnoopIter s_iter = snoopPorts.begin(); s_iter != snoopPorts.end();
s_iter++) {
if ((*s_iter)->getId() != id) {
snoop = true;
break;
}
}
}
int
Bus::findBlockSize(int id)
{
if (cachedBlockSizeValid)
return cachedBlockSize;
int max_bs = -1;
for (PortIter portIter = portMap.begin();
portIter != portMap.end(); portIter++) {
int tmp_bs = interfaces[portIter->second]->peerBlockSize();
if (tmp_bs > max_bs)
max_bs = tmp_bs;
}
for (SnoopIter s_iter = snoopPorts.begin();
s_iter != snoopPorts.end(); s_iter++) {
int tmp_bs = (*s_iter)->peerBlockSize();
if (tmp_bs > max_bs)
max_bs = tmp_bs;
}
if (max_bs <= 0)
max_bs = defaultBlockSize;
if (max_bs != 64)
warn_once("Blocksize found to not be 64... hmm... probably not.\n");
cachedBlockSize = max_bs;
cachedBlockSizeValid = true;
return max_bs;
}
unsigned int
Bus::drain(Event * de)
{
//We should check that we're not "doing" anything, and that noone is
//waiting. We might be idle but have someone waiting if the device we
//contacted for a retry didn't actually retry.
if (curTick >= tickNextIdle && retryList.size() == 0) {
return 0;
} else {
drainEvent = de;
return 1;
}
}
void
Bus::startup()
{
if (tickNextIdle < curTick)
tickNextIdle = (curTick / clock) * clock + clock;
}
BEGIN_DECLARE_SIM_OBJECT_PARAMS(Bus)
Param<int> bus_id;
Param<int> clock;
Param<int> width;
Param<bool> responder_set;
Param<int> block_size;
END_DECLARE_SIM_OBJECT_PARAMS(Bus)
BEGIN_INIT_SIM_OBJECT_PARAMS(Bus)
INIT_PARAM(bus_id, "a globally unique bus id"),
INIT_PARAM(clock, "bus clock speed"),
INIT_PARAM(width, "width of the bus (bits)"),
INIT_PARAM(responder_set, "Is a default responder set by the user"),
INIT_PARAM(block_size, "Default blocksize if no device has one")
END_INIT_SIM_OBJECT_PARAMS(Bus)
CREATE_SIM_OBJECT(Bus)
{
return new Bus(getInstanceName(), bus_id, clock, width, responder_set,
block_size);
}
REGISTER_SIM_OBJECT("Bus", Bus)