losing type information.
python/m5/config.py:
Allow math on CheckedInt-derived ParamValue classes w/o
losing type information.
- Make CheckedInt derive from NumericParamValue, and *not*
multiply inherit from long
- Move CheckedInt bounds check to _check() hook so we can
call it when value is updated (not just in constructor)
python/m5/convert.py:
- make toInteger() return a long, making toLong() unnecessary
- toMemorySize should return long rather than float
--HG--
extra : convert_revision : c1cf5e15b9ff35d9b573dd545e076fe68afef989
test/genini.py:
Use m5execfile to execute .py files so that sys.path gets handled correctly.
--HG--
extra : convert_revision : 8d8c90a7f40d51c95ba0f43bb9f6d7b2ee49f16e
util/qdo:
Don't automatically set qsub job name, as this causes qsub to fail
if the job name is too long or otherwise unsuitable.
--HG--
extra : convert_revision : 5ba48767574efaaff2c328549adee295780f7f70
interrupts.
dev/sinic.cc:
- The prepareRead function sets all the variables in the register
file that depend on various state bits that change on the fly.
Includes RxDone, RxWait, TxDone, and TxWait
- Use the new register information accessor functions to grab
validity and size information for the read and write functions
- read all registers directly from the register space by offset
and size, not by actual name (less code)
- The side effect of reading the interrupt status (clearing it) now
happens outside the actual chunk of code where the value is loaded.
- Add an iprRead function for when we may want speculative access
to device registers through an ipr or special instruction.
- When RxData or TxData are written, their busy flag is set to
indicate that they have an outstanding transaction.
- The RxHigh and TxLow interrupts are special, they only interrupt
if the rxEmpty or txFull limits were hit
- Move reset to the command register
- Update more registers on reset, clear rxEmpty and txFull
- Data dumps only happen if EthernetData trace flag set
- When a DMA completes, kick the other engine if it was waiting
- implement all of the new interrupts
- serialize the new stuff
dev/sinic.hh:
- Put all registers with their proper size and alignment into
the regs struct so that we can copy multiple at a time.
- Provide accessor functions for accessing the registers with
different sizes.
- Flags to track when the rx fifo hit empty and the tx fifo became
full. These flags are used to determine what to do when below
the watermarks, and are reset when crossing the watermark.
- the txDmaEvent should actually trigger the txDmaDone function
- Add an iprRead function for when we may want speculative access
to device registers through an ipr or special instruction.
- The prepareRead function sets all the variables in the register
file that depend on various state bits that change on the fly.
- add rx_max_intr and dedicated (for dedicated thread) config params
dev/sinicreg.hh:
Add some new registers: Command, RxMaxIntr, RxFifoSize, TxFifoSize,
rename XxThreshold to XxFifoMark
Move Reset to the Command register
Add Thread to the Config register
New interrupts, better names
More info in RxDone and TxDone
Easier access to information on each register (size, read, write, name)
python/m5/objects/Ethernet.py:
Both sinic and nsgige have the dedicated thread
Add a parameter to configure the maximum number for receive
packets per interrupt
--HG--
extra : convert_revision : 407c5a993b6fb17326b4c623ee5d4b25fd69ac80
dev/ns_gige.cc:
why call it pio2 when there's only one?
dev/sinic.cc:
Give the interface a different name for stats/output purposes
--HG--
extra : convert_revision : 895732f1a7e4c53e058a42b51320c2115dc05638
automatically happens in the interface after the packet
is delivered to the device.
--HG--
extra : convert_revision : 07890c4c5ce83fe709ce203f66c330d7cd631235
util/stats/db.py:
need to import the values function
util/stats/info.py:
it's just run
--HG--
extra : convert_revision : 3cb67d8112a1a5fdf761b73732859a71f585bd1f
util/stats/profile.py:
Pass around the number of symbols limit
deal with categorization a bit better.
--HG--
extra : convert_revision : 908410e296efd4514f2dfc0eb9e6e42834585560
util/stats/db.py:
Build a result object as the result of a query operation so it is
easier to populate and contains a bit more information than just
a big dict. Also change the next level data into a matrix instead
of a dict of dicts.
Move the "get" function into the Database object. (The get function
is used by the output parsing function as the interface for accessing
backend storage, same interface for profile stuff.)
Change the old get variable to the method variable, it describes how
the get works, (whether using sum, stdev, etc.)
util/stats/display.py:
Clean up the display functions, mostly formatting.
Handle values the way they should be now.
util/stats/info.py:
Totally re-work how values are accessed from their data store.
Access individual values on demand instead of calculating everything
and passing up a huge result from the bottom.
This impacts the way that proxying works, and in general, everything
is now esentially a proxy for the lower level database. Provide new
operators: unproxy, scalar, vector, value, values, total, and len which
retrieve the proper result from the object they are called on.
Move the ProxyGroup stuff (proxies of proxies!) here from the now gone
proxy.py file and integrate the shared parts of the code. The ProxyGroup
stuff allows you to write formulas without specifying the statistics
until evaluation time.
Get rid of global variables!
util/stats/output.py:
Move the dbinfo stuff into the Database itself. Each source should
have it's own get() function for accessing it's data.
This get() function behaves a bit differently than before in that it
can return vectors as well, deal with these vectors and with no result
conditions better.
util/stats/stats.py:
the info module no longer has the source global variable, just
create the database source and pass it around as necessary
--HG--
extra : convert_revision : 8e5aa228e5d3ae8068ef9c40f65b3a2f9e7c0cff
Create EtherDevBase which both Sinic and NSGigE derive from
bump fifos
drop rx max copy size to 1514 bytes to be friendlier with linux
default interrupt delay is 10us
dev/ns_gige.cc:
Shuffle around parameters to make it easier to find stuff
dev/sinic.cc:
Shuffle around parameters to make it easier to find stuff
rename cycleTime -> clock
dev/sinic.hh:
rename cycleTime -> clock
--HG--
extra : convert_revision : a673bee875e50d083098991aea20972fa8d5b5c7
dev/ns_gige.cc:
stop exposing the m5reg to the configuration stuff and build it
based on exposed flags. Expose dedicated now.
dev/ns_gige.hh:
goodbye m5reg hello dedicated
dev/ns_gige_reg.h:
Flags for the M5REG
--HG--
extra : convert_revision : 11134fe67cdf5291caacf9b3041739c437b983e3
test/Makefile:
get nmtest to compile
test/nmtest.cc:
make nmtest actually do something
--HG--
extra : convert_revision : 471c02c51355a5145f0d0ce965c2a341076120c0
util/stats/stats.py:
Make the default jobfile Test.py in the current directory
add the -J flag to tell it not to use a jobfile
--HG--
extra : convert_revision : 5cf5bb2f32ed9c9701a94eabc9b2a538581acf94
SConscript:
Get rid of the pc_sample stuff and move to the new profiling stuff
base/traceflags.py:
DPRINTF Stack stuff
cpu/base.cc:
cpu/base.hh:
cpu/exec_context.cc:
cpu/exec_context.hh:
cpu/simple/cpu.cc:
Add profiling stuff
kern/kernel_stats.hh:
Use a smart pointer
sim/system.cc:
sim/system.hh:
Create a new symbol table that has all of the symbols for a
particular system
util/stats/categories.py:
change around the categories, add categories for function
profiling stuff
util/stats/profile.py:
No profile parsing and display code to deal with function
profiling stuff, graph, dot, and text outputs.
--HG--
extra : convert_revision : b3de0cdc8bd468e42647966e2640ae009bda9eb8
util/pbs/job.py:
the default jobfile is now Test.py in the root of the jobs directory
util/pbs/pbs.py:
Clean up the qsub options handling and add job dependencies
util/pbs/send.py:
the default jobfile is now Test.py in the root of the jobs directory
add a flag to depend on your checkpoint
add a flag to specify your node type
create the base directory if it doesn't exist
--HG--
extra : convert_revision : dfffa4a5b0e68b2550a28fbb06b9d6a208ea1f2e
util/stats/output.py:
Create the graph directory if it doesn't exist
Don't write out a graph if all of the jobs for that graph are missing
--HG--
extra : convert_revision : 7993baf1a4be33a062f86a4f09791f01eaafa43c
possible to inline them. The symbol table is heavily
used in the stacktrace code and the faster access
functions should help out.
base/loader/symtab.cc:
Put these in the header file since they are simple and can
be inlined.
base/loader/symtab.hh:
Move the various findFoo functions to the header file so they
can be inlined. Add findNearestAddr functions that don't
return the symbol. This is so you can figure out what
function you're in based on the symbol table, but not waste
time copying out the symbol name if you don't need it.
--HG--
extra : convert_revision : 00cac40a79b0641a70c5ec7d9838fa0ec505c6a1
base/remote_gdb.cc:
Keep track of a vector of all of the usable debuggers and provide
a current_debugger variable that can be set from gdb to specify
which remote debugger is desired.
If debugger() is called and the current_debugger is not attached,
call accept on its listener so we can still attach a remote debugger
from the gdb prompt if we had forgotten to before.
Print out more information when the simulator starts so we can
distinguish debuggers more easily.
base/remote_gdb.hh:
Have a remote debugger instance keep track of its listener.
Number the remote debuggers so it's easier to figure out which is which.
--HG--
extra : convert_revision : 97119597ac3772ea4df6da3b3a4827f50253a51f
dev/ns_gige.cc:
Add support for 64-bit addresses
dev/ns_gige.hh:
dev/ns_gige_reg.h:
Need both cached 32-bit and 64-bit descriptors
--HG--
extra : convert_revision : 514788d8d95554b3512f1b75db5314c823453a8c
what it is sooner
Don't handle sigstop since you're not allowed to.
util/pbs/send.py:
write the pbs jobid here in send.py so we know what it is sooner
--HG--
extra : convert_revision : 93292d046cb4b628031e0e57e39eb4470b598ed8
cpu/memtest/memtest.cc:
Call random() consistently (not sometimes rand() and sometimes random()).
Don't bother to call random() for copy-only parameters unless we're
actually doing a copy.
--HG--
extra : convert_revision : 50ef72594ad53ba531584b3c9dde61ac036a4e38
stay fixed even if the path to the binary changes, so the simulation results
are independent of that path.
--HG--
extra : convert_revision : d1109cd284466c14eddc97289908a51e771fc5db
home directory (/z/m5/regression), so for now any modifications
should be manually copied there as well.
Note that this script is designed to be useful for running full
regressions outside of the cron job as well.
--HG--
extra : convert_revision : 052ec5d58b5ff765d8f3a9b50849ef34d62c8d66
build/SConstruct:
Add 'default=' argument to specify base config to use when setting
up a new build dir with a different name, e.g.:
scons default=ALPHA_SE USE_MYSQL=no ALPHA_SE_NOSQL/m5.opt
--HG--
extra : convert_revision : 0f7ee1414b3e84b36114415182baf54a8adab9b7
kern/linux/linux_system.cc:
remove random character
kern/linux/linux_threadinfo.hh:
Formatting fixes
--HG--
extra : convert_revision : 2be4772d7455ea1f4eb22966e00831701b7cbc27
