virtual function in alphaaccess.cc
dev/alpha_console.cc:
dev/alpha_console.hh:
dev/platform.hh:
dev/tsunami.cc:
dev/tsunami.hh:
dev/tsunami_io.hh:
Removed dynamic cast to get interrupt frequency and replaced with a
virtual function
--HG--
extra : convert_revision : 01f514a33d8f76c6527ab25a713d5c86f9fd646e
PIO writes. This was mainly related to not shadowing the status register
properly, and also not setting some of the status bits expected by the
operating system for the PIO write protocol.
--HG--
extra : convert_revision : fcdfd588be6e4f237aa6057889f0b3bdf4ea7631
dev/tsunami_cchip.hh:
clean up some comments
kern/linux/linux_syscalls.cc:
Cleaned up spacing of syscall numbers
kern/linux/linux_system.hh:
Added doxygen comments
--HG--
extra : convert_revision : 23ecdaa92a208458dd5c5d3c68ac9012ce2690da
dev/baddev.hh:
dev/pcidev.hh:
dev/tsunami.hh:
dev/tsunami_cchip.hh:
dev/tsunami_io.hh:
dev/tsunami_pchip.hh:
Added doxygen comments
dev/pciconfigall.hh:
Added doxygen comments. Made the hlist of devices private and provided
members to modify the data.
dev/pcidev.cc:
updated for change in pciconfigall
dev/tsunami_pchip.cc:
Deleted commented out code we don't need
kern/linux/linux_syscalls.cc:
Simplified the number -> name conversion.
kern/linux/linux_syscalls.hh:
Removed StandardNumber and replaced with Number.
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
LinuxSkipIdeDelay50msEvent was simply the same as the SkipFunc event,
so I removed it. Same with with LinuxSkipFuncEvent.
--HG--
extra : convert_revision : 1508c335f87d90373f5772f3a0407ea13e858d7e
Removed bootloader and just wrote command line into linux kernel
base/inifile.cc:
the forked process should not return, it should exit.
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
The serial port in reality has some delay and linux expects it. This
schedules an interrupt 300 cycles after the transmit instead of
immediately
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
removed boot loader and stuck boot command line in the kernel manually
--HG--
extra : convert_revision : 68aa54f8ca4e8391789f7a4c1ae227e6f8b94e13
dev/ns_gige.cc:
remove some useless DPRINTF's and add some useful ones. fix the missing RXDESC interrupt.
--HG--
extra : convert_revision : 17142480db1eaafa24f88640f8c7b8e7e077de1a
dev/ide_disk.cc:
Fix to PIO writes and also add command needed for shutdown
dev/pcidev.cc:
Change the panic on write to read-only registers to a debug print. The
kernel tries to write back over all of the PCI registers to restore
the saved SRM state, so we need to let it do this without panicing.
sim/system.cc:
Add back increment of number of running systems to allow trap of halt
work correctly.
--HG--
extra : convert_revision : 84aba4effbec14545f3610c19a8e321d7e7f7cf2
doesn't conflict with the old ethernet driver name.
Added config file to try to boot Tru64 with Tsunami
Cleaned up kern/linux a bit more and fixed bug where we were using
Tru64 system calls
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/tsunami.hh:
Changed name of lisa's device to NSgigE instead of Etherdev so it
doesn't conflict with the old ethernet driver name.
kern/linux/linux_syscalls.hh:
the Syscalls still used the Tru64 calls, oops.. fixed.
--HG--
extra : convert_revision : dedd20686cc367ed37f31920f753566afbc69045
if Tru64 is to continue to be supported on Turbolaser) and fixed
translation of physical addresses by clearing PA<42:35> when the real
uncachable bit (43) is set
arch/alpha/ev5.hh:
Change to support 256 ASNs and seperate VA_SPACE checks for EV5 and EV6
also add support proper translation of uncacheable physical addresses
dev/ide_ctrl.cc:
Fix to work with real address translation
--HG--
extra : convert_revision : aa3d1c284b8271d4763a8da2509c91bbcf83189a
dev/ns_gige.cc:
clear the device interrupts
dev/ns_gige_reg.h:
Add a new mask
--HG--
extra : convert_revision : ce3617315677cbee577ed8893821a8abc5a1a10d
dev/console.cc:
commented out code that checks if an interrupt is happening before issuing one
because they can get lost when linux boots
dev/console.hh:
added a setPlatform function to set the platform to interrupt
dev/platform.hh:
dev/tsunami.cc:
dev/tsunami.hh:
Added virtual functions to post console interrupts
dev/tsunami_io.cc:
allowed a 64bit read of the PIC since we can't do a physical byte read
dev/tsunami_uart.cc:
moved TsunamiUart to PioDevice
various little fixes to make linux work
dev/tsunami_uart.hh:
Made Tsunami_Uart a PIO device
dev/tsunamireg.h:
added some UART defines and used the ULL macros
kern/linux/linux_system.cc:
commented out waiting for gdb
--HG--
extra : convert_revision : 8cfd0700f3812ab349a6d7f132f85f4f421c5c5e
dev/ide_ctrl.cc:
Added serialize/unserialize functions and move some inlined functions
to regular functions
dev/ide_ctrl.hh:
Change inlined functions to regular functions
dev/ide_disk.cc:
Changes to dmaWrite and also add serialize/unserialize functions
dev/ide_disk.hh:
Support for serializing/unserializing
--HG--
extra : convert_revision : 40e016dc7f6637b033fe33409338437c985a05f4
mappings (writes still unverified, and read could probably be looked over
a bit more too)
dev/ide_disk.cc:
dev/ide_disk.hh:
Major changes to fix bogus handling of dma transfers. The read seems to
work pretty well, but the write is unverfied until we can get a disk
image that actually tries to write.
dev/tsunami_pchip.cc:
Change mask to properly mask 13 bits not 12
--HG--
extra : convert_revision : 08fe9bc32970e449cd045de479553a96a4e389d6
Added function to skip determine_cpu_caches(). We may have to update this in the
future: see note below.
arch/alpha/alpha_memory.cc:
dev/ide_ctrl.cc:
dev/tsunamireg.h:
Added ULL for 64bit ints
kern/linux/linux_system.cc:
Added a function to skip determine_cpu_caches, right now it is only used for
printing in proc, however in the future we may either want to implement the SC_CTL
IPR register or manually set alpha_l1i_cacheshape, alpha_l1d_cacheshape,
alpha_l2_cacheshape, alpha_l3_cacheshape to ((size << 10) | (linesize>>1)<<4 | way)
kern/linux/linux_system.hh:
added event to skip determine_cpu_caches()
--HG--
extra : convert_revision : 1065f2091bbe6832b730af490f5b4672c2afedce
arch/alpha/vtophys.cc:
Removed buggy code that tries to fix PAL addresses (may cause problems
while trying to debug in PAL code, but that should do this fix outside
of vtophys)
base/loader/symtab.cc:
base/loader/symtab.hh:
cpu/exetrace.cc:
Changed InstExec traces to always print a symbol name
dev/ide_ctrl.cc:
dev/ide_disk.cc:
Tabs
dev/ide_disk.hh:
Change buffer size
dev/tsunami_pchip.cc:
Fix translatePciToDma to support scatter gather mapping
kern/linux/linux_system.cc:
Force simulator to wait until remote debugger attaches (should be removed
or turned on/off with a flag)
--HG--
extra : convert_revision : 1d08aebe3f448c87a963dd613de3e2e0cff0d48d
Turbolaser)
base/range.hh:
Change semantics of range to be inclusive of the end value, may need to
check other users of range to make sure they are semantically correct.
This was needed for access of last byte in range of address on IDE and
makes sense for case of range from 0 to all f
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ide_disk.cc:
dev/ide_disk.hh:
Whole mess of changes.. at current state simulator will boot and read
partition table and then have a bunch of errors and panic
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/platform.hh:
Changes to work with platform separation
dev/tsunami.cc:
dev/tsunami.hh:
Change to work with platform separation
--HG--
extra : convert_revision : e1de22b54df7fdcf391efc2a8555ada93f46beab
base/range.hh:
andrew thought this might be a bug.
dev/etherpkt.cc:
don't need std:: since there is a using directive
dev/ns_gige.cc:
update to new PIO and PCI system
dev/ns_gige.hh:
update to deal with new PIO and PCI setup
dev/ns_gige_reg.h:
Add some new #defines that I ended up needing
dev/pcidev.cc:
some changes to the debugging printfs of pci device
--HG--
extra : convert_revision : 955ba8e8e1c418cfe1c6549dc3451ea091541556
configuration unnecessarily awkward. Biggest changes are:
- External and internal object names now match in all cases. The
macros still allow them to be different; the only reason I didn't
get rid of that is that the macros themselves should be going away
soon. In the few conflicting cases, I sometimes renamed the C++ object
and sometimes renamed the config object. The latter sets of substitions
are:
s/BaseBus/Bus/;
s/MemoryObject/FunctionalMemory/;
s/MemoryControl/MemoryController/;
s/FUPool/FuncUnitPool/;
- SamplingCPU is temporarily broken... we need to change the model
of how this works in the .ini file. Having it as a CPU proxy is
really awkward.
arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
cpu/simple_cpu/simple_cpu.cc:
sim/process.cc:
Rename objects to match config name.
cpu/base_cpu.cc:
Uncomment SimObject define since SamplingCPU no longer
does this for us.
dev/ethertap.cc:
Use unsigned instead of uint16_t for params.
kern/tru64/tru64_system.cc:
Use unsigned instead of uint64_t for init_param param.
test/paramtest.cc:
Fix old SimObjectParam.
--HG--
extra : convert_revision : 378ebbc6a71ad0694501d09979a44d111a59e8dc
assumes that all PCI devices are DmaDevices, and if not, they can just
ignore the DMA stuff)
--HG--
extra : convert_revision : aa58b658370696674ca4c32b265bc0400e5dda5a
dev/pcidev.cc:
member variables should begin with lowercase so they don't get confused with types.
dev/pcidev.hh:
member variables must begin with lowercase so they don't get confused with types.
--HG--
extra : convert_revision : f083baa60d0fbf64d858d684ff70ee06e7b7765d
sim object(depends on which platform tsunami/tlaser is being used)
dev/alpha_console.cc:
Use dynamice casting once during build to get at the proper device to calculate the frequency.
It is either a tsunami_IO or a tlaser_clock depending on platform (tsunami/tlaser).
If the simobject is not of either of those types then panic
dev/alpha_console.hh:
Pass in a SimObject * that is to either a tlaser_clock or a tsunami_IO
sim/sim_object.cc:
Make it so that you can have a SimObjectParam of type SimObject:
example:
SimObjectParam<SimObject *> so;
--HG--
extra : convert_revision : 08239ef23762b8ea11311630b73fe885d939402e
dev/alpha_console.cc:
missed this >>>> after i merged
kern/linux/linux_system.cc:
get rid of FS_MEASURES and change FnEvent to LinuxFnEvent
kern/linux/linux_system.hh:
get rid of FS_MEASURE
--HG--
extra : convert_revision : 210f46573bba0c772a224ce110af9a9230fabf6a
delay is more or less folded into the packet time, but an additional
delay is possible representing crossing a long haul link, or some
switches, etc.
--HG--
extra : convert_revision : 8fd689c2a7e3051e77f47a4cd5f51c6999d92c8f
and a physical memory address for DMA
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
Changed registers to array and added mapping function to translate between
PCI bus space and physical address space
--HG--
extra : convert_revision : e9dc4de4e7effe8e8e2365298843d6f767b5a289
of faking it. Renamed stuff to follow our style. Lots of
general cleanup.
dev/etherpkt.hh:
fix up includes
--HG--
extra : convert_revision : fb3a21466cdae00f8747d6e3027c9f2c63569c48
are present
dev/tsunami_cchip.cc:
Only need to interrupt processors that are there
Move RTC interrupt code into a function
dev/tsunami_cchip.hh:
Make a RTC interrupt function, move variables out of public scope
dev/tsunami_io.cc:
Make a call to the RTC interrupt routine instead
--HG--
extra : convert_revision : 88113664d0e54a7dddc00ec11ff9b9d088232b31
make it so that pio devices must respond with some delay.
dev/io_device.cc:
don't forget to include dma_interface.hh so we could use it.
dev/io_device.hh:
the generic BusInterface isn't enough for doing DMA
we need the actual DMAInterface
--HG--
extra : convert_revision : 70298d33c8520a3f4ad11aa600825a8cec7e44bf
dev/etherdump.cc:
now that init is automatically called by the framework, don't
init twice.
--HG--
extra : convert_revision : 16dcdef67aa193ed71ff546e7b255d60f39bf13d
dev/tsunami_cchip.cc:
Add support for IPI, making changes to read/write to MISC register
Particularly the IPREQ, IPINTR, and ITINTR subfields
dev/tsunami_cchip.hh:
Make an array to keep track of the number of outstanding IPI's,
Extend RTC to interrupt all processors, not just cpu0
dev/tsunami_io.cc:
Extend RTC to interrupt all present proccessors, not just cpu0
--HG--
extra : convert_revision : 0715cbf0abb06002c0fb0b05ef369304cdf75001
dev/tsunami_cchip.cc:
fixed another problem with the interrupt code, should all work now
--HG--
extra : convert_revision : 1d9fe6081b6391e3e09f1c4a9380a30240fac6dc
interrupt to use a different subnumber since both devices could
interrupt at the same time and we don't want to loose one.
dev/tsunami_cchip.cc:
rewrote interrupt code to handle interrupt mask clearing correctly
dev/tsunami_cchip.hh:
changed (post/clear)DRIR to use a interrupt number rather than a vecotr
dev/tsunami_io.cc:
updated for new post/clearDRIR calls
--HG--
extra : convert_revision : 5b39f5e15a66d5eb6e689e6ece62f99b5fa735ab
arch/alpha/vtophys.cc:
base/remote_gdb.cc:
Fix to remote debugger while in PAL code
dev/pcidev.cc:
Remove extra debug printf
--HG--
extra : convert_revision : e64988846ad05cd3ddf47034d72d99dae3501591
In the future, this can be used for actual data, but for now, it's
so that devices can respond to timing accesses properly. This way,
an uncached access on a bus further away will take longer to respond.
dev/alpha_console.cc:
dev/alpha_console.hh:
suport the separate IO bus
--HG--
extra : convert_revision : ececb70f5febfd00231f6e406f93b2a79be01261
Changed base_linux.ini file to use physical addresses
dev/alpha_console.cc:
dev/pciconfigall.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
Fix masking of read/write address to get read/write offset
dev/tsunami_uart.cc:
Fix masking of read/write address to get read/write offset
Also added add_child call that was missed
dev/tsunami_uart.hh:
Changed size to 0x8
--HG--
extra : convert_revision : 1468ca43167bfb28b28c4510401a1ebad683e102
some sundry problems with new interface
dev/alpha_console.cc:
dev/alpha_console.hh:
dev/baddev.cc:
dev/baddev.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/pcidev.cc:
dev/pcidev.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
Fixed to use new FunctionalMemory interface
--HG--
extra : convert_revision : bee98e6285d92f28fafacf919ab06eaf333a9b56
dev/pcidev.cc:
Linux 2.6 writes the latency timer, so it was added to the list of
allowable writes
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
A couple of changes so that the new linux autoconf serial driver thinks
that the serial port exists and configures it
--HG--
extra : convert_revision : 6c026ef754e31de56c9b837ceb8f6be48c8d8d9c
- Make the MemoryController use address ranges (via Range) instead
of an address and a mask
base/remote_gdb.cc:
reflect name change
dev/alpha_access.h:
better include
dev/alpha_console.cc:
- FunctionalMemory no longer takes care of mapping my address into
the proper address space. It must be done locally.
- the memory controller no longer uses a mask, but a size, and the
size is determined by the device, not the .ini file
- fix up address calculations to reflect the removal of a mask
- PhysicalMemory::getSize() -> PhysicalMemory::size()
dev/alpha_console.hh:
- FunctionalMemory no longer takes care of mapping my address into
the proper address space. It must be done locally.
- the memory controller no longer uses a mask, but a size, and the
size is determined by the device, not the .ini file
- fix up address calculations to reflect the removal of a mask
- get rid of MmapDevice and inherit from FunctionalMemory
--HG--
extra : convert_revision : e3a65c9debf6f899632d62c70781cbdc2826616b
dev/tsunami.cc:
Changed so Tsunami has a pointer to the System to which it belongs.
Now it is derived from generic base class Platform so platform stuff
can be accessed based on the system
dev/tsunami_io.cc:
dev/tsunami_io.hh:
Cleanup and added copyright
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
Added event to skip the "calibrate_delay" function, now calculate
loops_per_jiffy based on frequency, interrupt frequency, and constant
sim/system.hh:
Added pointer to generic Platform base class
--HG--
extra : convert_revision : 5bd925eec220a2ca48eb6164d2ecfdec96922c2c
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/pcidev.cc:
dev/pcidev.hh:
dev/tsunami.cc:
dev/tsunami.hh:
A bunch of changes to clean up new PCI code and to fix build
--HG--
extra : convert_revision : 71063bcc565c50fc293b323ddce2c8e701f544ff
execution pipeline (Alpha trapb & excb).
Add support for write memory barriers (mostly impacts
store buffer).
Add StaticInst flag to indicate memory barriers, though
this is not modeled in the pipeline yet.
arch/alpha/isa_desc:
Implement trapb, excb, mb, and wmb as insts with
no execution effect (empty execute() function) but
with flags that indicate their side effects.
Also make sure every instruction that needs to go to
the execute stage has a real opClass value, since we
are now using No_OpClass to signal insts that can get
dropped at dispatch.
StaticInst::branchTarget() is now a const method.
cpu/static_inst.hh:
Add flags to indicate serializing insts (trapb, excb) and
memory and write barriers.
Also declare some StaticInst methods as const methods.
dev/etherlink.hh:
sim/eventq.hh:
sim/serialize.cc:
sim/serialize.hh:
sim/sim_object.hh:
Make name() return value const.
--HG--
extra : convert_revision : 39520e71469fa20e0a7446b2e06b494eec17a02c
dev/tsunami.cc:
dev/tsunami.hh:
Change to use AdaptecController with Tsunami
--HG--
extra : convert_revision : 6ff4f9f7ae1959589340b2ab23755b4dbfec4dbc
This avoids incrementing and decrementing the MemReq
reference counters on every call and return.
arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
cpu/exec_context.hh:
cpu/memtest/memtest.cc:
cpu/memtest/memtest.hh:
dev/alpha_console.cc:
dev/alpha_console.hh:
Change MemReqPtr parameters to references.
--HG--
extra : convert_revision : 3ba18bdd9f996563988402576bfdd3430e1ab1e5
dev/tsunami.hh:
Started commenting code
dev/tsunami_cchip.cc:
removed unneccessary config files
dev/tsunami_io.cc:
Added code to see the value written
dev/tsunami_uart.cc:
conviently one of the addresses the SuperI/O southbridge can be is the same space
as the UART. This stops the simulator from panicing although it should probably be
changed a bit.
--HG--
extra : convert_revision : a3334a2c418ee8228089d0e1791fa78bbb276fe5
special console values separately.
dev/alpha_console.cc:
use new console specific input function
--HG--
extra : convert_revision : 08997d6115d2aac3a26cac2774b3c3fc0cd76ab0
statStream catchall that we had before)
Also provide an optional output directory that multiple simulator output
files can be written to.
Make most output files use the output directory
base/misc.cc:
send warnings to the outputStream as well
base/trace.cc:
dprintf_stream defaults to cerr
dev/console.cc:
use the output directory for the console output if it exists
dev/etherdump.cc:
dump to the output directory if it exists
sim/builder.cc:
sim/builder.hh:
move constructor and destructor to .cc file
use a function to get the stream that the builder dumps its
output to, and create a separate file in the output directory
if able
sim/main.cc:
statStream -> outputStream
sim/serialize.cc:
dump checkpoints to the output directory if specified
sim/universe.cc:
provide an output stream for simulator output. (This takes place of the
statStream catchall that we had before)
Also provide an optional output directory that multiple simulator output
files can be written to.
--HG--
extra : convert_revision : 03abce20edbbf7ec19c9ddd8d69ec8485c383532
from cchip register
dev/tsunami_cchip.cc:
added support for figuring out which cpu you are
--HG--
extra : convert_revision : 7862678a259931bb0a5b2ca8ad298a704bd272ec
cpu/exetrace.cc:
added looking for symbols at PC+4 and PC+8 thanks to gcc skiping
setting the gp where it can and jumping <func>+8
dev/console.cc:
commented out weird interrupt per nate's suggestion
dev/tsunami_cchip.cc:
moved rtc flag to correct bit
dev/tsunami_io.cc:
time interrupt will be 1024Hz and at some point be configurable by
linux
dev/tsunami_io.hh:
Timer interrupt will be 1024hz for now and in the future be
configurable by linux
--HG--
extra : convert_revision : 2fcc924c8848eb3c6166d9d517617ed193a2b89a
dev/tsunami_io.cc:
PIC, PIT, RTC implementation for tsunami working so far
dev/tsunami_io.hh:
PIT, PIC, RTC implementation for tlaser working so far
dev/tsunamireg.h:
Added RTC defines
kern/linux/linux_system.cc:
wrote cycle frequency into variable so linux doesn't probe for it.
The support exists, but it takes two seconds of time to do on a real
machine, so forever in the simulator.
--HG--
extra : convert_revision : e0ed7f271ece4ed69c06af35d1b0e8ed848cd138
