wierd ini files. The ini files are still used as an intermediate step,
but a sophisticated python library exists to help build them more
easily.
SConscript:
add the new embedded file stuff
remove all of the old object description junk
base/inifile.cc:
base/inifile.hh:
get rid of findDefault and findAppend since they were the source
of much evil.
base/trace.cc:
For now, if we don't have the dprintf_stream set up, dump
to standard out. We probably want a command line option
for this.
dev/alpha_console.cc:
PioDevice now takes a platform parameter.
All PioDevices must have a pio_latency parameter. We stick
a dummy parameter in here for now until we get rid of the
builder stuff.
dev/alpha_console.hh:
don't need Platform anymore
dev/baddev.cc:
PioDevice now takes a platform parameter.
All PioDevices must have a pio_latency parameter. We stick
a dummy parameter in here for now until we get rid of the
builder stuff. Same for the platform parameter, though we just
pass the PioDevice a null parameter since it isn't used by
this device and it's quicker.
dev/baddev.hh:
fix #include guards
dev/etherlink.cc:
rename parameters.
dev/ethertap.cc:
rename parameters
dev/ide_ctrl.cc:
All devices need an address even if it will get overwritten later.
dev/ide_disk.cc:
use an enum for the drive ID stuff.
rename disk_delay -> delay
Actually, I think that we should implement "cable select" and
have the controller tell the drive what it is.
dev/io_device.cc:
dev/io_device.hh:
All IO devices take a Platform *
dev/ns_gige.cc:
all devices need an io_bus. rename header_bus to io_bus
We don't need stuff for the interrupt controller since
it's all in the platform now.
dev/ns_gige.hh:
We don't need stuff for the interrupt controller now since
it's all in the platform.
dev/pciconfigall.cc:
Pass a dummy NULL to the PioDevice for the platform since
we don't need one.
dev/pcidev.cc:
Move a bunch of common functionality into the PciDev
dev/platform.hh:
remove unneeded code
dev/tsunami.cc:
remove unused param
dev/tsunami_cchip.cc:
pass platform pointer
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
pass platform variable
dev/uart.hh:
don't need to keep a platform pointer. it's in the base class
kern/linux/linux_system.cc:
kern/tru64/tru64_system.cc:
rename some parameters
sim/builder.cc:
clean up builder code. use more parameters from the
config node. all sections with a type= are now created,
the old mechanisms no longer work
sim/builder.hh:
remove some extra variables since they are found in the ConfigNode
sim/main.cc:
add a quick hack command line argument -X to dump out the
embedded files. (probably should be fixed up a little.)
accept .mpy files
printing to the streams has to happen after the hierarchy
is built since we're moving away from param contexts
sim/param.cc:
add parsing support for ranges
sim/process.cc:
isValid isn't very useful anymore. interpret the names
stdout, stderr, cout, cerr for the file descriptors
sim/pyconfig/SConscript:
Add Action handlers for creating an embedded python file
and for creating an embedded C file.
use these action handlers to embed all objects found in the objects
tree into the binary along with the importer and the m5config stuff
sim/pyconfig/m5config.py:
Major changes to the original configuration file generator. These
changes largely involve implementing copy-on-write like semantics
for all of the SimObjects. Real documentation must be written.
sim/universe.cc:
Universe becomes a SimObject since we don't really have the notion of
param contexts in the python code.
--HG--
rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py
extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
to add new devices. Abstract the Platform more so that
it is unnecessary to know know platform specifics for
interrupting or translating PCI DMA addresses.
dev/ide_ctrl.cc:
convert to parameter struct for initialization
use the interrupt functions in the PciDev base class
convert from tsunami to using platform
We don't need an interrupt controller here.
dev/ide_ctrl.hh:
don't use Tsunami, use Platform
make the IdeDisk a friend so that it can access my plaform
convert to parameter struct for construction
dev/ide_disk.cc:
don't use tsunami references, but platform references
dev/ns_gige.cc:
Convert to parameter struct for initialzation. Use code in
base class for interrupts so we don't need to know anything
about the platform. Don't need an IntrControl *.
dev/ns_gige.hh:
We don't need a Tsunami * anymore
convert to a parameter struct for construction
dev/pcidev.cc:
deal with new parameter struct
dev/pcidev.hh:
- Move all of the configuration parameters into a param struct
that we can pass into the constructor.
- Add a Platform * for accessing new generic interrupt post/clear
and dma address translation fuctions
- Create functions for posting/clearing interrupts and translating
dma addresses
dev/platform.cc:
have default functions that panic on pci calls
dev/platform.hh:
don't make the pci stuff pure virtual, but rather provide
default implementations that panic. Also, add dma address
translation.
dev/tsunami.cc:
this-> isn't necessary here.
add pci address translation
dev/tsunami.hh:
implement the pciToDma address translation
--HG--
extra : convert_revision : 7db27a2fa1f1bd84704921ec7ca0280b5653c43e
functions instead of preprocessor macros.
arch/alpha/vtophys.cc:
use new constants, functions and structs to clean up the
vtophys code.
arch/alpha/vtophys.hh:
Clean up a little bit and make the protypes match new changes.
base/remote_gdb.cc:
dev/ide_disk.cc:
kern/tru64/tru64_events.cc:
use new constants from isa_traits.hh instead of ones from
old pmap.h
--HG--
extra : convert_revision : 5dce34e3b0c84ba72cefca34e5999b99898edcef
second translation (which is superfluous) doesn't work properly when
system memory is higher than 128MB
--HG--
extra : convert_revision : 9cdf6925689d376953b1aa071bcd1e2f06419202
tests
dev/ide_ctrl.cc:
Formatting
dev/ide_disk.cc:
Remove some junk, add an assert to serialize, and add missing serialize
for command register.
--HG--
extra : convert_revision : 8f99857e32f278dd4e6f23deffc8047c6411d5b2
Linux 2.6 with DMA support
dev/ide_disk.cc:
Add debug infomation for DMA transfers and fix handling of PRD pointer
values
dev/ide_disk.hh:
Reduce buffer (MAX_DMA) size to 64K
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
Add handling of PCTL register and also fix the translate from PCI to DMA
addresses which was incorrect
--HG--
extra : convert_revision : 562f55fa1c7099ad0f5a23f59dec2c8ec7601d43
PIO writes. This was mainly related to not shadowing the status register
properly, and also not setting some of the status bits expected by the
operating system for the PIO write protocol.
--HG--
extra : convert_revision : fcdfd588be6e4f237aa6057889f0b3bdf4ea7631
dev/ide_disk.cc:
Fix to PIO writes and also add command needed for shutdown
dev/pcidev.cc:
Change the panic on write to read-only registers to a debug print. The
kernel tries to write back over all of the PCI registers to restore
the saved SRM state, so we need to let it do this without panicing.
sim/system.cc:
Add back increment of number of running systems to allow trap of halt
work correctly.
--HG--
extra : convert_revision : 84aba4effbec14545f3610c19a8e321d7e7f7cf2
dev/ide_ctrl.cc:
Added serialize/unserialize functions and move some inlined functions
to regular functions
dev/ide_ctrl.hh:
Change inlined functions to regular functions
dev/ide_disk.cc:
Changes to dmaWrite and also add serialize/unserialize functions
dev/ide_disk.hh:
Support for serializing/unserializing
--HG--
extra : convert_revision : 40e016dc7f6637b033fe33409338437c985a05f4
mappings (writes still unverified, and read could probably be looked over
a bit more too)
dev/ide_disk.cc:
dev/ide_disk.hh:
Major changes to fix bogus handling of dma transfers. The read seems to
work pretty well, but the write is unverfied until we can get a disk
image that actually tries to write.
dev/tsunami_pchip.cc:
Change mask to properly mask 13 bits not 12
--HG--
extra : convert_revision : 08fe9bc32970e449cd045de479553a96a4e389d6
arch/alpha/vtophys.cc:
Removed buggy code that tries to fix PAL addresses (may cause problems
while trying to debug in PAL code, but that should do this fix outside
of vtophys)
base/loader/symtab.cc:
base/loader/symtab.hh:
cpu/exetrace.cc:
Changed InstExec traces to always print a symbol name
dev/ide_ctrl.cc:
dev/ide_disk.cc:
Tabs
dev/ide_disk.hh:
Change buffer size
dev/tsunami_pchip.cc:
Fix translatePciToDma to support scatter gather mapping
kern/linux/linux_system.cc:
Force simulator to wait until remote debugger attaches (should be removed
or turned on/off with a flag)
--HG--
extra : convert_revision : 1d08aebe3f448c87a963dd613de3e2e0cff0d48d
Turbolaser)
base/range.hh:
Change semantics of range to be inclusive of the end value, may need to
check other users of range to make sure they are semantically correct.
This was needed for access of last byte in range of address on IDE and
makes sense for case of range from 0 to all f
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ide_disk.cc:
dev/ide_disk.hh:
Whole mess of changes.. at current state simulator will boot and read
partition table and then have a bunch of errors and panic
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/platform.hh:
Changes to work with platform separation
dev/tsunami.cc:
dev/tsunami.hh:
Change to work with platform separation
--HG--
extra : convert_revision : e1de22b54df7fdcf391efc2a8555ada93f46beab
