Increase the default number of CSHR's, we should really fix this or make it a parameter
Use a setBlocked call to tell the bus it should block
New technique for sampling and switchover:
1) Sampler switchover event happens
2) All cpus in the current phase of sampling associated with this sampler are signaled to switchover
3) Each cpu drains it's pipe of things being executed (stops fetching and waits for empty pipe)
4) Once the pipe is empty the cpu calls back to the sampler to signal it has finished, and moves into the switchedout state (continues not to fetch)
5) The sampler collects all the signals, once all cpus are drained it calls the new cpu's in the next phase to takeover from the correct cpu
6) The statistics are reset and the next switchover time is calculated from this point
cpu/base_cpu.cc:
cpu/base_cpu.hh:
cpu/simple_cpu/simple_cpu.cc:
cpu/simple_cpu/simple_cpu.hh:
Reconfigure the way the sampling switchover works
cpu/pc_event.cc:
More debugging information on kernel panic's
kern/linux/linux_system.cc:
More debug info for Kernel Die events
kern/linux/linux_system.hh:
More debug info for kernel die events
--HG--
extra : convert_revision : 61cc42e43ba738705aa1f1d167b65d4d6dee51ae
wierd ini files. The ini files are still used as an intermediate step,
but a sophisticated python library exists to help build them more
easily.
SConscript:
add the new embedded file stuff
remove all of the old object description junk
base/inifile.cc:
base/inifile.hh:
get rid of findDefault and findAppend since they were the source
of much evil.
base/trace.cc:
For now, if we don't have the dprintf_stream set up, dump
to standard out. We probably want a command line option
for this.
dev/alpha_console.cc:
PioDevice now takes a platform parameter.
All PioDevices must have a pio_latency parameter. We stick
a dummy parameter in here for now until we get rid of the
builder stuff.
dev/alpha_console.hh:
don't need Platform anymore
dev/baddev.cc:
PioDevice now takes a platform parameter.
All PioDevices must have a pio_latency parameter. We stick
a dummy parameter in here for now until we get rid of the
builder stuff. Same for the platform parameter, though we just
pass the PioDevice a null parameter since it isn't used by
this device and it's quicker.
dev/baddev.hh:
fix #include guards
dev/etherlink.cc:
rename parameters.
dev/ethertap.cc:
rename parameters
dev/ide_ctrl.cc:
All devices need an address even if it will get overwritten later.
dev/ide_disk.cc:
use an enum for the drive ID stuff.
rename disk_delay -> delay
Actually, I think that we should implement "cable select" and
have the controller tell the drive what it is.
dev/io_device.cc:
dev/io_device.hh:
All IO devices take a Platform *
dev/ns_gige.cc:
all devices need an io_bus. rename header_bus to io_bus
We don't need stuff for the interrupt controller since
it's all in the platform now.
dev/ns_gige.hh:
We don't need stuff for the interrupt controller now since
it's all in the platform.
dev/pciconfigall.cc:
Pass a dummy NULL to the PioDevice for the platform since
we don't need one.
dev/pcidev.cc:
Move a bunch of common functionality into the PciDev
dev/platform.hh:
remove unneeded code
dev/tsunami.cc:
remove unused param
dev/tsunami_cchip.cc:
pass platform pointer
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
pass platform variable
dev/uart.hh:
don't need to keep a platform pointer. it's in the base class
kern/linux/linux_system.cc:
kern/tru64/tru64_system.cc:
rename some parameters
sim/builder.cc:
clean up builder code. use more parameters from the
config node. all sections with a type= are now created,
the old mechanisms no longer work
sim/builder.hh:
remove some extra variables since they are found in the ConfigNode
sim/main.cc:
add a quick hack command line argument -X to dump out the
embedded files. (probably should be fixed up a little.)
accept .mpy files
printing to the streams has to happen after the hierarchy
is built since we're moving away from param contexts
sim/param.cc:
add parsing support for ranges
sim/process.cc:
isValid isn't very useful anymore. interpret the names
stdout, stderr, cout, cerr for the file descriptors
sim/pyconfig/SConscript:
Add Action handlers for creating an embedded python file
and for creating an embedded C file.
use these action handlers to embed all objects found in the objects
tree into the binary along with the importer and the m5config stuff
sim/pyconfig/m5config.py:
Major changes to the original configuration file generator. These
changes largely involve implementing copy-on-write like semantics
for all of the SimObjects. Real documentation must be written.
sim/universe.cc:
Universe becomes a SimObject since we don't really have the notion of
param contexts in the python code.
--HG--
rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py
extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
which is evaluated slightly differently than in previous versions of gcc.
arch/alpha/alpha_linux_process.cc:
Alphabetize includes.
arch/alpha/vptr.hh:
Change the constants that are being used for alpha pagebytes to come from the ISA.
base/random.hh:
cpu/static_inst.cc:
sim/param.cc:
Fix up template syntax.
base/range.hh:
Include iostream for << operator.
base/res_list.hh:
base/statistics.hh:
cpu/simple_cpu/simple_cpu.hh:
cpu/static_inst.hh:
sim/eventq.hh:
sim/param.hh:
Fixup for templated code to resolve different scope lookup in gcc 3.4. This defers the lookup of the
function/variable until actual instantiation time by making it dependent on the templated class/function.
base/trace.cc:
Fix call to new.
base/trace.hh:
Fix up #define to have full path.
cpu/base_cpu.cc:
Fix up call to new.
dev/etherlink.hh:
dev/ns_gige.hh:
dev/sinic.hh:
Fixup for friend class/function declaration. g++ 3.4 no longer allows typedefs to be declared as
a friend class.
dev/pcidev.hh:
Fix up re-definition of access level to params.
kern/linux/linux_syscalls.hh:
kern/tru64/tru64_syscalls.hh:
Fix up header. Fix up template syntax.
sim/serialize.cc:
Include errno.h.
sim/startup.cc:
Change startupq. queue was getting destructed before all things had called ~StartupCallback(), which lead
to a segfault. This puts startupq in global space, and we allocate it ourselves. Other code may be similar
to this and may need changing in the future.
sim/syscall_emul.hh:
Include cpu/exec_context.hh and sim/process.hh, as forward declarations are no longer sufficient.
sim/universe.cc:
Include errno.h
--HG--
extra : convert_revision : e49d08ee89eb06a28351f02bafc028ca6652d5af
base/loader/symtab.cc:
base/loader/symtab.hh:
Get rid of old unused calls.
cpu/simple_cpu/simple_cpu.hh:
No need to include base/loader/symtab.hh
kern/linux/linux_system.cc:
kern/tru64/tru64_system.cc:
Include base/loader/symtab.hh (since it's no longer included in system.hh)
sim/system.hh:
Replace include of base/loader/symtab.hh with forward class decl.
--HG--
extra : convert_revision : 3a778c2f409ec94e3b00eaa9b3859943cb39918c
Simple text list of symbol (or address) and count
will be dumped to m5prof.<cpu-name> if the cpu's
pc_sample_interval param is set.
SConscript:
Add cpu/full_cpu/pc_sample_profile.cc
base/callback.hh:
Add a comment about MakeCallback.
Fix type in another comment.
base/loader/symtab.cc:
Revamp findNearestSymbol() to provide addresses of both
nearest symbols (preceding and following) as well as
string for former.
Move global definition of debugSymbolTable here too.
base/loader/symtab.hh:
Revamp findNearestSymbol() to provide addresses of both
nearest symbols (preceding and following) as well as
string for former.
Move global declaration of debugSymbolTable here too.
cpu/exetrace.cc:
Use new findNearestSymbol() interface for trace symbols.
kern/linux/linux_system.cc:
sim/system.cc:
Remove extern of debugSymbolTable (now in symtab.hh)
sim/process.cc:
Initialize debugSymbolTable if binary has a symbol table.
--HG--
extra : convert_revision : 0b5393dc39c40ac88c953684708f1125da550671
all macros in ev5.hh to inline functions or constant typed
variables and make them follow our style while we're at it.
All of the stuff in this file actually belongs in the ISA
traits code, but this is a first step at getting things done
in the right manner.
arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
arch/alpha/ev5.cc:
arch/alpha/isa_desc:
dev/ns_gige.cc:
kern/tru64/tru64_events.cc:
deal with changes in ev5.hh
arch/alpha/ev5.hh:
Macros are nasty, so let's get rid of them. Convert all
all macros to inline functions or constant typed variables.
Make them follow our style while we're at it.
All of the stuff in this file actually belongs in the ISA
traits code, but this is a first step at getting things done
in the right manner.
arch/alpha/isa_traits.hh:
move some of the ev5 specific code into the isa
arch/alpha/vtophys.cc:
base/remote_gdb.cc:
deal with isa addition
cpu/exec_context.hh:
be less isa specific and use the isa traits to figure out
what we can.
dev/alpha_console.cc:
dev/pciconfigall.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
deal with changes in ev5.hh
I don't believe this masking is actually necessary. We should
look at removing it later.
dev/ide_ctrl.cc:
sort #includes
deal with changes in ev5.hh
--HG--
extra : convert_revision : c8a3adf0a4b1d198aefe38fc38b295abf289b08a
clean up a few other things while we're here.
base/bitfield.hh:
base/compression/null_compression.hh:
dont #include <inttypes.hh> use "sim/host.hh"
fix #include guard
base/stats/types.hh:
dont #include <inttypes.hh> use "sim/host.hh"
kern/linux/aligned.hh:
dont #include <stdint.hh> use "sim/host.hh"
fix #include guard
kern/linux/hwrpb.hh:
fix #include guard
--HG--
extra : convert_revision : 288c687a59a1e770bbb834879173e1a2ea371bce
functions instead of preprocessor macros.
arch/alpha/vtophys.cc:
use new constants, functions and structs to clean up the
vtophys code.
arch/alpha/vtophys.hh:
Clean up a little bit and make the protypes match new changes.
base/remote_gdb.cc:
dev/ide_disk.cc:
kern/tru64/tru64_events.cc:
use new constants from isa_traits.hh instead of ones from
old pmap.h
--HG--
extra : convert_revision : 5dce34e3b0c84ba72cefca34e5999b99898edcef
instead of using symlink. The symlink broke scons's built-in include
dependency tacking.
Interestingly once it was fixed scons discovered two circular dependency
problems which are also fixed now.
SConscript:
Make targetarch directory in build tree and copy arch/alpha files to it
instead of using symlink. The symlink broke scons's built-in include
dependency tacking.
arch/alpha/ev5.hh:
Get rid of circular #include dependence.
kern/kernel_stats.cc:
Add needed header file.
kern/linux/linux_syscalls.hh:
kern/tru64/tru64_syscalls.hh:
Replace targetarch/syscalls.hh with single template class declaration.
--HG--
extra : convert_revision : b8551623c1d441c6eb8d0651387e97e373128814
kern/kernel_stats.cc:
Serialize idleProcess.
kern/system_events.cc:
Remove the idle start event once it runs.
--HG--
extra : convert_revision : 05ac574558a88b86ccfce963e4ca9b037a1a8509
kern/linux/linux_system.cc:
Don't scheduling interrupt events if we are not binning interrupts
kern/tru64/tru64_system.cc:
set the bin_int boolean in the system structure
--HG--
extra : convert_revision : 68eea9c448f1c481fc79be1777acb536d6385495
code
arch/alpha/alpha_memory.cc:
Fixed unaligned trap faults
arch/alpha/ev5.cc:
little more verbose faulting information
kern/linux/linux_system.cc:
more descriptive errors, and the correct offsets from symbols
sim/system.cc:
load local pal symbols
--HG--
extra : convert_revision : 0c81badf77321d5e1a060dcae2d42204e5a1fc84
cpu/pc_event.cc:
mask off lower three bits so we can have an event in palcode
--HG--
extra : convert_revision : 49fcdc5c359ca2bd9149f092f80f77abcd7b20ee
arch/alpha/ev5.cc:
set the mode explictly rather than having a bool user/notuser
cpu/simple_cpu/simple_cpu.hh:
there is no class Kernel
kern/kernel_stats.cc:
use cpu_mode_num
kern/kernel_stats.hh:
add interrupt mode and use cpu_mode_num rather than constant
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
kern/system_events.cc:
kern/system_events.hh:
add events to change the mode to/from interrupt
sim/system.cc:
sim/system.hh:
add a pal symbol table
--HG--
extra : convert_revision : 9d30e826b72122062a5ea12d094f94760e75c66a
single place so it's easier to work with.
- Add support for binning kernel/user/idle time separately from
lisa's binning stuff, but make the two compatible.
- KernelStats used to directly implement the pImpl idiom, but
it makes more sense to just remove the level of indirection and
make the exec context have a pointer to the stats.
- Factor common code out of LinuxSystem and Tru64System and put
it into the System base class. While doing that, make all
constructors take a pointer to a parameter struct instead of
naming the parameters individually to make it much easier to add
parameters to these classes.
SConscript:
Move the function tracking and binning stuff around.
arch/alpha/ev5.cc:
kernelStats is now a pointer
arch/alpha/pseudo_inst.cc:
kernelStats is now a pointer
the parameters to the system have been moved into their own
struct
base/trace.hh:
provide a little functor class for wrapping a string that
can allow you to define name() in any scope very simply
for use with DPRINTF
cpu/base_cpu.cc:
New order of arguments for consistency.
cpu/exec_context.cc:
kernelStats no longer has the level of indirection in it,
execContext has the indirection now. so, kernelStats is a pointer.
We also need a pointer to the kernelBinning stuff from the system
and we need to figure out if we want to do binning or not.
Move a whole bunch of code into kern_binning.cc so it's all
in the same place.
cpu/exec_context.hh:
We want pointers to the kernel binning/stats stuff and we'll
have the exec_context and system have the level of indirection
instead of having the extra layer in the kernel stats class.
cpu/simple_cpu/simple_cpu.cc:
call through the exec context to do the special binning
stuff.
kern/kernel_stats.cc:
kern/kernel_stats.hh:
Re-organize the stats stuff and remove the level of indirection
(that was there to simplify building) and move the binning stuff
into its own class/file.
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
kern/tru64/tru64_system.cc:
kern/tru64/tru64_system.hh:
sim/system.cc:
sim/system.hh:
move lots of common system code into the base system class so
that it can be shared between linux, tru64, and whatever else
we decide to support in the future.
Make the constructor take a pointer to a parameter struct so that
it is easier to pass parameters to the parent.
kern/system_events.cc:
move the majority of the binning code into the Kernel::Binning class
in the kern_binning file
kern/system_events.hh:
FnEvents only need to know the bin
create the Idle start event to find the PCBB of the idle
process when it starts.
kern/tru64/tru64_events.cc:
memCtrl -> memctrl
sim/process.cc:
sim/process.hh:
re-order args for consistency
--HG--
extra : convert_revision : 86cb39738c41fcd680f2aad125c9dde000227b2b
structures.
Added event to print out currently running task
base/traceflags.py:
Added Thread trace flag
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
Added event to print out currently running task
--HG--
extra : convert_revision : 94347dbaf90f39eb40467b2a43b4628a3deafc6c
SConscript:
Added printk to scons
kern/linux/linux_system.cc:
kern/linux/printk.cc:
Forgot to commit this dprintk change
--HG--
extra : convert_revision : d9a71835b55ece7e84b34632ee6646ac2d0535da
arch/alpha/ev5.hh:
Added max address PAL code can be at
arch/alpha/vtophys.cc:
Check max address pal can be at so we don't do the wrong conversion
if gdb asks for an unaligned access.
--HG--
extra : convert_revision : b44f6a8fcd8582337a7d4033f28137c7e718a6a8
the object name on every line.
This makes grep a bit more effective.
kern/tru64/dump_mbuf.cc:
use the new data dump format that trace.hh now provides
--HG--
extra : convert_revision : 179efa96aaff9da710baae13c9e981975d2abdc1
kern/linux/linux_system.cc:
Formatting
sim/host.hh:
When we say ULL and UL we really just want a 64-bit value, not
necessarily a long long, so cast the integer to (u)int64_t
this fixes a problem with byte swapping.
--HG--
extra : convert_revision : ad25ace5a7b92a7c928f2d52e531193c91f3f8c8
a realworld file.
arch/alpha/isa_desc:
arch/alpha/pseudo_inst.hh:
implement the readfile pseudo instruction that will read a
chunk of a realworld file.
arch/alpha/pseudo_inst.cc:
implement the readfile pseudo instruction that will read a
chunk of a realworld file. The filename is a per system
parameter and comes from the system itself.
kern/linux/linux_system.cc:
sim/system.hh:
Create a per-system readfile parameter for use by the readfile
pseudo instruction. That way each system can get its own file.
--HG--
extra : convert_revision : 941b3a3e20702a6252b219ca66a6d90da2944c50
from the simulator into the simulatee
kern/tru64/dump_mbuf.cc:
rename CopyData -> CopyOut
--HG--
extra : convert_revision : e3ef27a5762dfc495dcb84a372470464c27557d2
dev/alpha_console.cc:
rather than acessing a byte array for alpha access, access the members
**this requires an updated console**
dev/pcidev.cc:
correctly type all the pci data and store in in little endian no
matter what system we are on
dev/tsunami_uart.cc:
correct a bug with the data type.
kern/linux/linux_system.cc:
system type in hwprb needs to be endian happy as well.
--HG--
extra : convert_revision : 8de9bb69365b5d30fceaf4fa342a1639f92d7a83
way a Tru64 system can be either Tlaser (by default) or Tsunami.
Added debugSymbolTable to Tru64 for symbol printing in InstExec Trace
cpu/exetrace.cc:
Fixed bug if debugSymbolTable doesn't exist, we shouldn't try to
look something up in it.
kern/tru64/tru64_system.hh:
Added ability to specify system type/revision in config file. This
way a Tru64 system can be either Tlaser (by default) or Tsunami.
--HG--
extra : convert_revision : c69a7411f0aa118ca5a766e43b7ceb7a5bb04cdf
dev/tsunami_cchip.hh:
clean up some comments
kern/linux/linux_syscalls.cc:
Cleaned up spacing of syscall numbers
kern/linux/linux_system.hh:
Added doxygen comments
--HG--
extra : convert_revision : 23ecdaa92a208458dd5c5d3c68ac9012ce2690da
dev/baddev.hh:
dev/pcidev.hh:
dev/tsunami.hh:
dev/tsunami_cchip.hh:
dev/tsunami_io.hh:
dev/tsunami_pchip.hh:
Added doxygen comments
dev/pciconfigall.hh:
Added doxygen comments. Made the hlist of devices private and provided
members to modify the data.
dev/pcidev.cc:
updated for change in pciconfigall
dev/tsunami_pchip.cc:
Deleted commented out code we don't need
kern/linux/linux_syscalls.cc:
Simplified the number -> name conversion.
kern/linux/linux_syscalls.hh:
Removed StandardNumber and replaced with Number.
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
LinuxSkipIdeDelay50msEvent was simply the same as the SkipFunc event,
so I removed it. Same with with LinuxSkipFuncEvent.
--HG--
extra : convert_revision : 1508c335f87d90373f5772f3a0407ea13e858d7e
Removed bootloader and just wrote command line into linux kernel
base/inifile.cc:
the forked process should not return, it should exit.
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
The serial port in reality has some delay and linux expects it. This
schedules an interrupt 300 cycles after the transmit instead of
immediately
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
removed boot loader and stuck boot command line in the kernel manually
--HG--
extra : convert_revision : 68aa54f8ca4e8391789f7a4c1ae227e6f8b94e13
doesn't conflict with the old ethernet driver name.
Added config file to try to boot Tru64 with Tsunami
Cleaned up kern/linux a bit more and fixed bug where we were using
Tru64 system calls
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/tsunami.hh:
Changed name of lisa's device to NSgigE instead of Etherdev so it
doesn't conflict with the old ethernet driver name.
kern/linux/linux_syscalls.hh:
the Syscalls still used the Tru64 calls, oops.. fixed.
--HG--
extra : convert_revision : dedd20686cc367ed37f31920f753566afbc69045
kern/linux/linux_system.cc:
add binned_fns parameter to System, remove nonLinux events from LinuxSystem, fix ~LinuxSystem() by adding delete of some things that need to be deleted.
kern/linux/linux_system.hh:
fix header file to go with linux_system.cc, removing nonLinux events and adding binned_fns param.
kern/tru64/tru64_system.cc:
add somme consistency by having having binned_fns be _binned_fns in the Tru64System arg list.
--HG--
extra : convert_revision : b2ec0c1614e185aafa177c220b91d1f6a4fe6876
kern/tru64/tru64_system.cc:
make binned_fns a parameter for System in addition to Tru64System. Do all the fnEvents setting at the System level, since that is system-independent.
kern/tru64/tru64_system.hh:
deal with FnEvents in the System, and move some fns over to System.
sim/system.cc:
sim/system.hh:
lift binning stuff into System out of Tru64System
--HG--
extra : convert_revision : 591dee6f2013f5c43037726c529a00682b5cf82e
