never clear about whether the end of the range was inclusive
or exclusive. Make it inclusive, but also provide a RangeSize()
function that will generate a Range based on a start and a size.
This, in combination with using the comparison operators, makes
almost all usages of the range not care how it is stored.
base/range.cc:
Make the end of the range inclusive.
start/end -> first/last
(end seems too much like end() in stl)
base/range.hh:
Make the end of the range inclusive.
Fix all comparison operators so that they work correctly with
an inclusive range. Also, when comparing one range to another
with <, <=, >, >=, we only look at the beginning of the range
beacuse x <= y should be the same as x < y || x == y. (This wasn't
the case before.)
Add a few functions for making a range:
RangeSize is start and size
RangeEx is start and end where end is exclusive
RangeIn is start and end where end is inclusive
start/end -> first/last
(end seems too much like end() in stl)
dev/alpha_console.cc:
dev/baddev.cc:
dev/ide_ctrl.cc:
dev/ns_gige.cc:
dev/pciconfigall.cc:
dev/pcidev.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
Use the RangeSize function to create a range.
--HG--
extra : convert_revision : 29a7eb7fce745680f1c77fefff456c2144bc3994
ticks for the most commonly accessed devices.
dev/baddev.cc:
Get rid of the constant cache access latency.
For unimportant devices, don't add any latency.
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ns_gige.cc:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/uart.cc:
dev/uart.hh:
make the cache access latency a parameter that is based on bus
ticks.
dev/io_device.cc:
dev/io_device.hh:
add an io latency variable
dev/ns_gige.hh:
this moved to io_device.hh
--HG--
extra : convert_revision : 4883130feeaef48abee492eddf0b8eb40eb94789
and started cleaning up config files.
arch/alpha/isa_desc:
Made implementation of cttz and ctlz more compact
base/remote_gdb.cc:
Added comment about PALcode debugger accesses
dev/baddev.cc:
dev/baddev.hh:
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
Cleaned up includes and changed device from FunctionalMemory to
PioDevice for detailed boot
dev/ns_gige.cc:
The ethernet dev uses two BARs, and the first bars size was being set
incorrectly.
dev/tsunamireg.h:
I don't know why we were using the superpage as the PCI memory addr.
Changed and works correctly with detailed boot.
--HG--
extra : convert_revision : b535e76612cb90b544305dc1aa8c5e0e774564bd
dev/ide_ctrl.cc:
Properly serialize/unserialize the PciDev base class to get it to remap
the MMU
dev/ns_gige.cc:
dev/ns_gige.hh:
Remove the "addr" paramter from the constructor and change the device
to use PCI based MMU mappings only
dev/pciconfigall.cc:
Change comments
dev/pcidev.cc:
Properly setup the MMU after a serialize
--HG--
extra : convert_revision : 4b2e7ba58e3c24fac1ff6f80635e704d6ecc0eff
Turbolaser)
base/range.hh:
Change semantics of range to be inclusive of the end value, may need to
check other users of range to make sure they are semantically correct.
This was needed for access of last byte in range of address on IDE and
makes sense for case of range from 0 to all f
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ide_disk.cc:
dev/ide_disk.hh:
Whole mess of changes.. at current state simulator will boot and read
partition table and then have a bunch of errors and panic
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/platform.hh:
Changes to work with platform separation
dev/tsunami.cc:
dev/tsunami.hh:
Change to work with platform separation
--HG--
extra : convert_revision : e1de22b54df7fdcf391efc2a8555ada93f46beab
Changed base_linux.ini file to use physical addresses
dev/alpha_console.cc:
dev/pciconfigall.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
Fix masking of read/write address to get read/write offset
dev/tsunami_uart.cc:
Fix masking of read/write address to get read/write offset
Also added add_child call that was missed
dev/tsunami_uart.hh:
Changed size to 0x8
--HG--
extra : convert_revision : 1468ca43167bfb28b28c4510401a1ebad683e102
some sundry problems with new interface
dev/alpha_console.cc:
dev/alpha_console.hh:
dev/baddev.cc:
dev/baddev.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/pcidev.cc:
dev/pcidev.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
Fixed to use new FunctionalMemory interface
--HG--
extra : convert_revision : bee98e6285d92f28fafacf919ab06eaf333a9b56
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/pcidev.cc:
dev/pcidev.hh:
dev/tsunami.cc:
dev/tsunami.hh:
A bunch of changes to clean up new PCI code and to fix build
--HG--
extra : convert_revision : 71063bcc565c50fc293b323ddce2c8e701f544ff
