configs/common/FSConfig.py:
seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
Use instruction count from cpu rather than cycles because that is what legion does
we can change it back after were done with legion
src/base/bitfield.hh:
add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
change asserts of packet success to if panics wrapped with NDEBUG defines
so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
convert some tabs to spaces
src/python/m5/objects/T1000.py:
add more fake devices for each l1 bank and each memory controller
--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
tests/SConscript:
add a new configuration for two-system tests (atomic simple only)
--HG--
extra : convert_revision : 16c260ab16f38779fe17b1cab18f36d5c7a70846
which takes care of almost everything needed for putting together
a release.
--HG--
extra : convert_revision : b05d418a1002633b1286591eb8a8588ba33f5df1
Add the ability to use an address mask for symbol loading
Rather then silently failing on platform accesses panic
Move BadAddr/IsaFake no Device from Tsunami
Let the system kernel be none, but warn about it
configs/common/FSConfig.py:
We don't have a kernel for sparc yet
src/arch/sparc/system.cc:
Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
src/base/loader/aout_object.cc:
src/base/loader/aout_object.hh:
src/base/loader/ecoff_object.cc:
src/base/loader/ecoff_object.hh:
src/base/loader/elf_object.cc:
src/base/loader/elf_object.hh:
src/base/loader/object_file.hh:
src/base/loader/raw_object.cc:
src/base/loader/raw_object.hh:
Add the ability to use an address mask for symbol loading
src/dev/sparc/t1000.cc:
Rather then silently failing on platform accesses panic
src/dev/sparc/t1000.hh:
fix up a couple of platform comments
src/python/m5/objects/Bus.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/T1000.py:
src/python/m5/objects/Tsunami.py:
Move BadAddr/IsaFake no Device from Tsunami
src/python/m5/objects/System.py:
Let kernel be none
src/sim/system.cc:
Let the system kernel be none, but warn about it
--HG--
extra : convert_revision : 92f6afef599a3d3c7c5026d03434102c41c7b5f4
change /netperf/netperf to /netperf-bin/netperf
nat-netperf-maerts-client.rcS:
bad comment that went with the file - accidentally committed but probably doesn't matter, i ust eliminated an ivlb in the script.
configs/boot/nat-netperf-maerts-client.rcS:
replace netperf/netperf with netperf-bin/netperf
configs/boot/netperf-maerts-client.rcS:
change /netperf/netperf to /netperf-bin/netperf
--HG--
extra : convert_revision : 32fed0042e267f315d3e688ebc4b66d7002b85f0
into zower.eecs.umich.edu:/eecshome/m5/newmemmid
src/arch/sparc/isa_traits.hh:
src/arch/sparc/miscregfile.hh:
hand merge
--HG--
extra : convert_revision : 34f50dc5e6e22096cb2c08b5888f2b0fcd418f3e
src/arch/SConscript:
add mmaped_ipr.hh to switch headers
src/arch/sparc/asi.hh:
make ASI_IMPLICT=0 so by default nothing needs to be done
src/arch/sparc/miscregfile.hh:
miscregfile no longer needs to include asi.hh
src/arch/sparc/tlb.cc:
src/arch/sparc/tlb.hh:
implement panic instructions for mmaped ipr reads
src/cpu/simple/atomic.cc:
add check for mmaped iprs and handle them if it exists
src/mem/request.hh:
allocate space in the flags for mmaped iprs. Put in in the first 8 bits so that by default its fast. Move the other flags up 8 bits
--HG--
extra : convert_revision : 31255b0494588c4d06a727fe35241121d741b115
Write directly to 'cscope.files' and run 'cscope -b' .
Now this script does everything automatically.
cscope-index.py:
Rename: util/cscope-find.py -> util/cscope-index.py
util/cscope-find.py:
Write directly to 'cscope.files' and run 'cscope -b' .
Now this script does everything automatically.
--HG--
rename : util/cscope-find.py => util/cscope-index.py
extra : convert_revision : cd6fa5cc0c2146f7184c9213956aff67c7cb9341
Right now this introduces a minor memory leak as old physPorts and virtPorts are not deleted when new ones are created. A flyspray task has been created for this issue. It can not be resolved until we determine how the bus will handle giving out ID's to functional ports that may be deleted.
src/cpu/o3/cpu.cc:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Change the setup of the physPort and virtPort to instead happen every time the CPU has a context activated. This is a little high overhead, but keeps it working correctly when the CPU does not have a physical memory attached to it until it switches in (like the case of switch CPUs).
src/cpu/o3/thread_context.hh:
Change function from being called at init() to just being called whenever the memory ports need to be connected.
src/cpu/o3/thread_context_impl.hh:
Update this to not delete the port if it's the same as the virtPort.
src/cpu/thread_context.hh:
Change function from being called at init() to whenever the memory ports need to be connected.
src/cpu/thread_state.cc:
Instead of initializing the ports, simply connect them, deleting any old ports that might exist. This allows these functions to be called multiple times.
src/cpu/thread_state.hh:
Ports are no longer initialized, but rather connected at context activation time.
--HG--
extra : convert_revision : e399ce5dfbd6ad658c953a7c9c7b69b89a70219e
src/arch/sparc/process.cc:
MachineBytes doesn't exist any more.
src/arch/sparc/regfile.cc:
Add in the miscRegFile for good measure.
src/cpu/o3/isa_specific.hh:
Add in a section for SPARC
src/cpu/o3/sparc/cpu.cc:
src/cpu/o3/sparc/cpu.hh:
src/cpu/o3/sparc/cpu_builder.cc:
src/cpu/o3/sparc/cpu_impl.hh:
src/cpu/o3/sparc/dyn_inst.cc:
src/cpu/o3/sparc/dyn_inst.hh:
src/cpu/o3/sparc/dyn_inst_impl.hh:
src/cpu/o3/sparc/impl.hh:
src/cpu/o3/sparc/params.hh:
src/cpu/o3/sparc/thread_context.cc:
src/cpu/o3/sparc/thread_context.hh:
Sparc version of this file.
--HG--
extra : convert_revision : 34bb5218f802d0a1328132a518cdd769fb59b6a4
src/arch/sparc/SConscript:
Add code to serialize/unserialze tlb entries
src/arch/sparc/asi.cc:
src/arch/sparc/asi.hh:
update asi names for how they're listed in the supplement
add asis
add more asi functions
src/arch/sparc/isa_traits.hh:
move the interrupt stuff and some basic address space stuff into isa traits
src/arch/sparc/miscregfile.cc:
src/arch/sparc/miscregfile.hh:
add mmu registers to tlb
get rid of implicit asi stuff... the tlb will handle it
src/arch/sparc/regfile.hh:
make isnt/dataAsid return ints not asis
src/arch/sparc/tlb.cc:
src/arch/sparc/tlb.hh:
first cut at sparc tlb
src/arch/sparc/vtophys.hh:
pagatable nedes to be included here
src/mem/request.hh:
add asi and if the request is a memory mapped register to the requset object
src/sim/host.hh:
fix incorrect definition of LL
--HG--
extra : convert_revision : 6c85cd1681c62c8cd8eab04f70b1f15a034b0aa3
src/arch/sparc/isa/base.isa:
Fix a constant.
src/arch/sparc/isa/decoder.isa:
Made carry calculation more consistent.
src/arch/sparc/isa/operands.isa:
Use the right constant.
--HG--
extra : convert_revision : 25b3a09ff20d4b8e1a95ee8a983d14ef3cfe73bb
