add a simple netperf-stream test to the long tests.

tests/SConscript:
    add a new configuration for two-system tests (atomic simple only)

--HG--
extra : convert_revision : 16c260ab16f38779fe17b1cab18f36d5c7a70846
This commit is contained in:
Lisa Hsu 2006-12-01 01:24:01 -05:00
parent df6c12e716
commit 161b8d1a23
10 changed files with 3091 additions and 1 deletions

View file

@ -205,7 +205,9 @@ if env['FULL_SYSTEM']:
configs += ['tsunami-simple-atomic',
'tsunami-simple-timing',
'tsunami-simple-atomic-dual',
'tsunami-simple-timing-dual']
'tsunami-simple-timing-dual',
'twosys-tsunami-simple-atomic']
else:
configs += ['simple-atomic', 'simple-timing', 'o3-timing']

View file

@ -0,0 +1,48 @@
# Copyright (c) 2006 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Lisa Hsu
import m5
from m5.objects import *
m5.AddToPath('../configs/common')
from SysPaths import *
from FSConfig import *
from Benchmarks import *
test_sys = makeLinuxAlphaSystem('atomic',
SysConfig('netperf-stream-client.rcS'))
test_sys.cpu = AtomicSimpleCPU(cpu_id=0)
test_sys.cpu.connectMemPorts(test_sys.membus)
drive_sys = makeLinuxAlphaSystem('atomic',
SysConfig('netperf-server.rcS'))
drive_sys.cpu = AtomicSimpleCPU(cpu_id=0)
drive_sys.cpu.connectMemPorts(drive_sys.membus)
root = makeDualRoot(test_sys, drive_sys, "ethertrace")
maxtick = 199999999

View file

@ -0,0 +1,111 @@
M5 console: m5AlphaAccess @ 0xFFFFFD0200000000
Got Configuration 623
memsize 8000000 pages 4000
First free page after ROM 0xFFFFFC0000018000
HWRPB 0xFFFFFC0000018000 l1pt 0xFFFFFC0000040000 l2pt 0xFFFFFC0000042000 l3pt_rpb 0xFFFFFC0000044000 l3pt_kernel 0xFFFFFC0000048000 l2reserv 0xFFFFFC0000046000
kstart = 0xFFFFFC0000310000, kend = 0xFFFFFC0000855898, kentry = 0xFFFFFC0000310000, numCPUs = 0x1
CPU Clock at 1000000 MHz IntrClockFrequency=1024
Booting with 1 processor(s)
KSP: 0x20043FE8 PTBR 0x20
Console Callback at 0x0, fixup at 0x0, crb offset: 0x510
Memory cluster 0 [0 - 392]
Memory cluster 1 [392 - 15992]
Initalizing mdt_bitmap addr 0xFFFFFC0000038000 mem_pages 4000
ConsoleDispatch at virt 10000658 phys 18658 val FFFFFC00000100A8
unix_boot_mem ends at FFFFFC0000076000
k_argc = 0
jumping to kernel at 0xFFFFFC0000310000, (PCBB 0xFFFFFC0000018180 pfn 1067)
CallbackFixup 0 18000, t7=FFFFFC000070C000
Linux version 2.6.13 (hsul@zed.eecs.umich.edu) (gcc version 3.4.3) #1 SMP Sun Oct 8 19:52:07 EDT 2006
Booting GENERIC on Tsunami variation DP264 using machine vector DP264 from SRM
Major Options: SMP LEGACY_START VERBOSE_MCHECK
Command line: root=/dev/hda1 console=ttyS0
memcluster 0, usage 1, start 0, end 392
memcluster 1, usage 0, start 392, end 16384
freeing pages 1069:16384
reserving pages 1069:1070
SMP: 1 CPUs probed -- cpu_present_mask = 1
Built 1 zonelists
Kernel command line: root=/dev/hda1 console=ttyS0
PID hash table entries: 1024 (order: 10, 32768 bytes)
Using epoch = 1900
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 4, 131072 bytes)
Memory: 118784k/131072k available (3314k kernel code, 8952k reserved, 983k data, 224k init)
Mount-cache hash table entries: 512
SMP mode deactivated.
Brought up 1 CPUs
SMP: Total of 1 processors activated (1998756.81 BogoMIPS).
NET: Registered protocol family 16
EISA bus registered
pci: enabling save/restore of SRM state
SCSI subsystem initialized
srm_env: version 0.0.5 loaded successfully
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Initializing Cryptographic API
rtc: Standard PC (1900) epoch (1900) detected
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 8250
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
nbd: registered device at major 43
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
eth0: ns83820.c: 0x22c: 00000000, subsystem: 0000:0000
eth0: enabling optical transceiver
eth0: using 64 bit addressing.
eth0: ns83820 v0.22: DP83820 v1.3: 00:90:00:00:00:02 io=0x09000000 irq=30 f=h,sg
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:00.0
PIIX4: chipset revision 0
PIIX4: 100% native mode on irq 31
ide0: BM-DMA at 0x8400-0x8407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x8408-0x840f, BIOS settings: hdc:DMA, hdd:DMA
hda: M5 IDE Disk, ATA DISK drive
hdb: M5 IDE Disk, ATA DISK drive
ide0 at 0x8410-0x8417,0x8422 on irq 31
hda: max request size: 128KiB
hda: 409248 sectors (209 MB), CHS=406/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1
hdb: max request size: 128KiB
hdb: 4177920 sectors (2139 MB), CHS=4144/16/63, UDMA(33)
hdb: cache flushes not supported
hdb: unknown partition table
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 32768 bytes)
TCP established hash table entries: 16384 (order: 5, 262144 bytes)
TCP bind hash table entries: 16384 (order: 5, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
ip_conntrack version 2.1 (512 buckets, 4096 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
arp_tables: (C) 2002 David S. Miller
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 224k freed
init started: BusyBox v1.1.0 (2006.10.31-01:25+0000) multi-call binary
mounting filesystems...
loading script...
setting up network...
eth0: link now 1000F mbps, full duplex and up.
running netserver...
Starting netserver at port 12865
signal client to begin...done.
starting bash...
#

View file

@ -0,0 +1,120 @@
M5 console: m5AlphaAccess @ 0xFFFFFD0200000000
Got Configuration 623
memsize 8000000 pages 4000
First free page after ROM 0xFFFFFC0000018000
HWRPB 0xFFFFFC0000018000 l1pt 0xFFFFFC0000040000 l2pt 0xFFFFFC0000042000 l3pt_rpb 0xFFFFFC0000044000 l3pt_kernel 0xFFFFFC0000048000 l2reserv 0xFFFFFC0000046000
kstart = 0xFFFFFC0000310000, kend = 0xFFFFFC0000855898, kentry = 0xFFFFFC0000310000, numCPUs = 0x1
CPU Clock at 1000000 MHz IntrClockFrequency=1024
Booting with 1 processor(s)
KSP: 0x20043FE8 PTBR 0x20
Console Callback at 0x0, fixup at 0x0, crb offset: 0x510
Memory cluster 0 [0 - 392]
Memory cluster 1 [392 - 15992]
Initalizing mdt_bitmap addr 0xFFFFFC0000038000 mem_pages 4000
ConsoleDispatch at virt 10000658 phys 18658 val FFFFFC00000100A8
unix_boot_mem ends at FFFFFC0000076000
k_argc = 0
jumping to kernel at 0xFFFFFC0000310000, (PCBB 0xFFFFFC0000018180 pfn 1067)
CallbackFixup 0 18000, t7=FFFFFC000070C000
Linux version 2.6.13 (hsul@zed.eecs.umich.edu) (gcc version 3.4.3) #1 SMP Sun Oct 8 19:52:07 EDT 2006
Booting GENERIC on Tsunami variation DP264 using machine vector DP264 from SRM
Major Options: SMP LEGACY_START VERBOSE_MCHECK
Command line: root=/dev/hda1 console=ttyS0
memcluster 0, usage 1, start 0, end 392
memcluster 1, usage 0, start 392, end 16384
freeing pages 1069:16384
reserving pages 1069:1070
SMP: 1 CPUs probed -- cpu_present_mask = 1
Built 1 zonelists
Kernel command line: root=/dev/hda1 console=ttyS0
PID hash table entries: 1024 (order: 10, 32768 bytes)
Using epoch = 1900
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 4, 131072 bytes)
Memory: 118784k/131072k available (3314k kernel code, 8952k reserved, 983k data, 224k init)
Mount-cache hash table entries: 512
SMP mode deactivated.
Brought up 1 CPUs
SMP: Total of 1 processors activated (1998756.81 BogoMIPS).
NET: Registered protocol family 16
EISA bus registered
pci: enabling save/restore of SRM state
SCSI subsystem initialized
srm_env: version 0.0.5 loaded successfully
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Initializing Cryptographic API
rtc: Standard PC (1900) epoch (1900) detected
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 8250
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
nbd: registered device at major 43
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
eth0: ns83820.c: 0x22c: 00000000, subsystem: 0000:0000
eth0: enabling optical transceiver
eth0: using 64 bit addressing.
eth0: ns83820 v0.22: DP83820 v1.3: 00:90:00:00:00:02 io=0x09000000 irq=30 f=h,sg
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:00.0
PIIX4: chipset revision 0
PIIX4: 100% native mode on irq 31
ide0: BM-DMA at 0x8400-0x8407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x8408-0x840f, BIOS settings: hdc:DMA, hdd:DMA
hda: M5 IDE Disk, ATA DISK drive
hdb: M5 IDE Disk, ATA DISK drive
ide0 at 0x8410-0x8417,0x8422 on irq 31
hda: max request size: 128KiB
hda: 409248 sectors (209 MB), CHS=406/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1
hdb: max request size: 128KiB
hdb: 4177920 sectors (2139 MB), CHS=4144/16/63, UDMA(33)
hdb: cache flushes not supported
hdb: unknown partition table
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 32768 bytes)
TCP established hash table entries: 16384 (order: 5, 262144 bytes)
TCP bind hash table entries: 16384 (order: 5, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
ip_conntrack version 2.1 (512 buckets, 4096 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
arp_tables: (C) 2002 David S. Miller
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 224k freed
init started: BusyBox v1.1.0 (2006.10.31-01:25+0000) multi-call binary
mounting filesystems...
loading script...
setting up network...
eth0: link now 1000F mbps, full duplex and up.
waiting for server...server ready
starting test...
netperf warmup
/benchmarks/netperf-bin/netperf -H 10.0.0.1 -t TCP_STREAM -l -100k
TCP STREAM TEST to 10.0.0.1 : dirty data
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
5000000 5000000 5000000 1.29 30.91
netperf benchmark
/benchmarks/netperf-bin/netperf -H 10.0.0.1 -t TCP_STREAM -k16384,0 -K16384,0 -- -m 65536 -M 65536 -s 262144 -S 262144
TCP STREAM TEST to 10.0.0.1 : dirty data

View file

@ -0,0 +1,476 @@
---------- Begin Simulation Statistics ----------
drivesys.cpu.dtb.accesses 401302 # DTB accesses
drivesys.cpu.dtb.acv 40 # DTB access violations
drivesys.cpu.dtb.hits 624298 # DTB hits
drivesys.cpu.dtb.misses 569 # DTB misses
drivesys.cpu.dtb.read_accesses 268057 # DTB read accesses
drivesys.cpu.dtb.read_acv 30 # DTB read access violations
drivesys.cpu.dtb.read_hits 393538 # DTB read hits
drivesys.cpu.dtb.read_misses 487 # DTB read misses
drivesys.cpu.dtb.write_accesses 133245 # DTB write accesses
drivesys.cpu.dtb.write_acv 10 # DTB write access violations
drivesys.cpu.dtb.write_hits 230760 # DTB write hits
drivesys.cpu.dtb.write_misses 82 # DTB write misses
drivesys.cpu.idle_fraction 1.000000 # Percentage of idle cycles
drivesys.cpu.itb.accesses 1337980 # ITB accesses
drivesys.cpu.itb.acv 22 # ITB acv
drivesys.cpu.itb.hits 1337786 # ITB hits
drivesys.cpu.itb.misses 194 # ITB misses
drivesys.cpu.kern.callpal 4443 # number of callpals executed
drivesys.cpu.kern.callpal_swpctx 70 1.58% 1.58% # number of callpals executed
drivesys.cpu.kern.callpal_tbi 5 0.11% 1.69% # number of callpals executed
drivesys.cpu.kern.callpal_swpipl 3654 82.24% 83.93% # number of callpals executed
drivesys.cpu.kern.callpal_rdps 359 8.08% 92.01% # number of callpals executed
drivesys.cpu.kern.callpal_rdusp 1 0.02% 92.03% # number of callpals executed
drivesys.cpu.kern.callpal_rti 322 7.25% 99.28% # number of callpals executed
drivesys.cpu.kern.callpal_callsys 25 0.56% 99.84% # number of callpals executed
drivesys.cpu.kern.callpal_imb 7 0.16% 100.00% # number of callpals executed
drivesys.cpu.kern.inst.arm 0 # number of arm instructions executed
drivesys.cpu.kern.inst.hwrei 5483 # number of hwrei instructions executed
drivesys.cpu.kern.inst.quiesce 215 # number of quiesce instructions executed
drivesys.cpu.kern.ipl_count 4191 # number of times we switched to this ipl
drivesys.cpu.kern.ipl_count_0 1189 28.37% 28.37% # number of times we switched to this ipl
drivesys.cpu.kern.ipl_count_21 10 0.24% 28.61% # number of times we switched to this ipl
drivesys.cpu.kern.ipl_count_22 205 4.89% 33.50% # number of times we switched to this ipl
drivesys.cpu.kern.ipl_count_31 2787 66.50% 100.00% # number of times we switched to this ipl
drivesys.cpu.kern.ipl_good 2593 # number of times we switched to this ipl from a different ipl
drivesys.cpu.kern.ipl_good_0 1189 45.85% 45.85% # number of times we switched to this ipl from a different ipl
drivesys.cpu.kern.ipl_good_21 10 0.39% 46.24% # number of times we switched to this ipl from a different ipl
drivesys.cpu.kern.ipl_good_22 205 7.91% 54.15% # number of times we switched to this ipl from a different ipl
drivesys.cpu.kern.ipl_good_31 1189 45.85% 100.00% # number of times we switched to this ipl from a different ipl
drivesys.cpu.kern.ipl_ticks 199572064366 # number of cycles we spent at this ipl
drivesys.cpu.kern.ipl_ticks_0 199571744403 100.00% 100.00% # number of cycles we spent at this ipl
drivesys.cpu.kern.ipl_ticks_21 1620 0.00% 100.00% # number of cycles we spent at this ipl
drivesys.cpu.kern.ipl_ticks_22 17630 0.00% 100.00% # number of cycles we spent at this ipl
drivesys.cpu.kern.ipl_ticks_31 300713 0.00% 100.00% # number of cycles we spent at this ipl
drivesys.cpu.kern.ipl_used 0.618707 # fraction of swpipl calls that actually changed the ipl
drivesys.cpu.kern.ipl_used_0 1 # fraction of swpipl calls that actually changed the ipl
drivesys.cpu.kern.ipl_used_21 1 # fraction of swpipl calls that actually changed the ipl
drivesys.cpu.kern.ipl_used_22 1 # fraction of swpipl calls that actually changed the ipl
drivesys.cpu.kern.ipl_used_31 0.426624 # fraction of swpipl calls that actually changed the ipl
drivesys.cpu.kern.mode_good_kernel 110
drivesys.cpu.kern.mode_good_user 107
drivesys.cpu.kern.mode_good_idle 3
drivesys.cpu.kern.mode_switch_kernel 174 # number of protection mode switches
drivesys.cpu.kern.mode_switch_user 107 # number of protection mode switches
drivesys.cpu.kern.mode_switch_idle 218 # number of protection mode switches
drivesys.cpu.kern.mode_switch_good 0.440882 # fraction of useful protection mode switches
drivesys.cpu.kern.mode_switch_good_kernel 0.632184 # fraction of useful protection mode switches
drivesys.cpu.kern.mode_switch_good_user 1 # fraction of useful protection mode switches
drivesys.cpu.kern.mode_switch_good_idle 0.013761 # fraction of useful protection mode switches
drivesys.cpu.kern.mode_ticks_kernel 263475 0.24% 0.24% # number of ticks spent at the given mode
drivesys.cpu.kern.mode_ticks_user 1278343 1.18% 1.43% # number of ticks spent at the given mode
drivesys.cpu.kern.mode_ticks_idle 106483912 98.57% 100.00% # number of ticks spent at the given mode
drivesys.cpu.kern.swap_context 70 # number of times the context was actually changed
drivesys.cpu.kern.syscall 22 # number of syscalls executed
drivesys.cpu.kern.syscall_2 1 4.55% 4.55% # number of syscalls executed
drivesys.cpu.kern.syscall_6 3 13.64% 18.18% # number of syscalls executed
drivesys.cpu.kern.syscall_17 2 9.09% 27.27% # number of syscalls executed
drivesys.cpu.kern.syscall_97 1 4.55% 31.82% # number of syscalls executed
drivesys.cpu.kern.syscall_99 2 9.09% 40.91% # number of syscalls executed
drivesys.cpu.kern.syscall_101 2 9.09% 50.00% # number of syscalls executed
drivesys.cpu.kern.syscall_102 3 13.64% 63.64% # number of syscalls executed
drivesys.cpu.kern.syscall_104 1 4.55% 68.18% # number of syscalls executed
drivesys.cpu.kern.syscall_105 3 13.64% 81.82% # number of syscalls executed
drivesys.cpu.kern.syscall_106 1 4.55% 86.36% # number of syscalls executed
drivesys.cpu.kern.syscall_118 2 9.09% 95.45% # number of syscalls executed
drivesys.cpu.kern.syscall_150 1 4.55% 100.00% # number of syscalls executed
drivesys.cpu.not_idle_fraction 0.000000 # Percentage of non-idle cycles
drivesys.cpu.numCycles 1959293 # number of cpu cycles simulated
drivesys.cpu.num_insts 1959077 # Number of instructions executed
drivesys.cpu.num_refs 626286 # Number of memory references
drivesys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
drivesys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
drivesys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD).
drivesys.disk0.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
drivesys.disk0.dma_write_full_pages 0 # Number of full page size DMA writes.
drivesys.disk0.dma_write_txs 0 # Number of DMA write transactions.
drivesys.disk2.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
drivesys.disk2.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
drivesys.disk2.dma_read_txs 0 # Number of DMA read transactions (not PRD).
drivesys.disk2.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
drivesys.disk2.dma_write_full_pages 0 # Number of full page size DMA writes.
drivesys.disk2.dma_write_txs 0 # Number of DMA write transactions.
drivesys.tsunami.ethernet.coalescedRxDesc 1 # average number of RxDesc's coalesced into each post
drivesys.tsunami.ethernet.coalescedRxIdle 0 # average number of RxIdle's coalesced into each post
drivesys.tsunami.ethernet.coalescedRxOk 0 # average number of RxOk's coalesced into each post
drivesys.tsunami.ethernet.coalescedRxOrn 0 # average number of RxOrn's coalesced into each post
drivesys.tsunami.ethernet.coalescedSwi 0 # average number of Swi's coalesced into each post
drivesys.tsunami.ethernet.coalescedTotal 1 # average number of interrupts coalesced into each post
drivesys.tsunami.ethernet.coalescedTxDesc 0 # average number of TxDesc's coalesced into each post
drivesys.tsunami.ethernet.coalescedTxIdle 0 # average number of TxIdle's coalesced into each post
drivesys.tsunami.ethernet.coalescedTxOk 0 # average number of TxOk's coalesced into each post
drivesys.tsunami.ethernet.descDMAReads 5 # Number of descriptors the device read w/ DMA
drivesys.tsunami.ethernet.descDMAWrites 13 # Number of descriptors the device wrote w/ DMA
drivesys.tsunami.ethernet.descDmaReadBytes 120 # number of descriptor bytes read w/ DMA
drivesys.tsunami.ethernet.descDmaWriteBytes 104 # number of descriptor bytes write w/ DMA
drivesys.tsunami.ethernet.droppedPackets 0 # number of packets dropped
drivesys.tsunami.ethernet.postedInterrupts 10 # number of posts to CPU
drivesys.tsunami.ethernet.postedRxDesc 6 # number of RxDesc interrupts posted to CPU
drivesys.tsunami.ethernet.postedRxIdle 0 # number of rxIdle interrupts posted to CPU
drivesys.tsunami.ethernet.postedRxOk 0 # number of RxOk interrupts posted to CPU
drivesys.tsunami.ethernet.postedRxOrn 0 # number of RxOrn posted to CPU
drivesys.tsunami.ethernet.postedSwi 0 # number of software interrupts posted to CPU
drivesys.tsunami.ethernet.postedTxDesc 0 # number of TxDesc interrupts posted to CPU
drivesys.tsunami.ethernet.postedTxIdle 4 # number of TxIdle interrupts posted to CPU
drivesys.tsunami.ethernet.postedTxOk 0 # number of TxOk interrupts posted to CPU
drivesys.tsunami.ethernet.rxBandwidth 38400 # Receive Bandwidth (bits/s)
drivesys.tsunami.ethernet.rxBytes 960 # Bytes Received
drivesys.tsunami.ethernet.rxIpChecksums 8 # Number of rx IP Checksums done by device
drivesys.tsunami.ethernet.rxPPS 40 # Packet Reception Rate (packets/s)
drivesys.tsunami.ethernet.rxPackets 8 # Number of Packets Received
drivesys.tsunami.ethernet.rxTcpChecksums 8 # Number of rx TCP Checksums done by device
drivesys.tsunami.ethernet.rxUdpChecksums 0 # Number of rx UDP Checksums done by device
drivesys.tsunami.ethernet.totBandwidth 70320 # Total Bandwidth (bits/s)
drivesys.tsunami.ethernet.totBytes 1758 # Total Bytes
drivesys.tsunami.ethernet.totPackets 13 # Total Packets
drivesys.tsunami.ethernet.totalRxDesc 8 # total number of RxDesc written to ISR
drivesys.tsunami.ethernet.totalRxIdle 0 # total number of RxIdle written to ISR
drivesys.tsunami.ethernet.totalRxOk 0 # total number of RxOk written to ISR
drivesys.tsunami.ethernet.totalRxOrn 0 # total number of RxOrn written to ISR
drivesys.tsunami.ethernet.totalSwi 0 # total number of Swi written to ISR
drivesys.tsunami.ethernet.totalTxDesc 0 # total number of TxDesc written to ISR
drivesys.tsunami.ethernet.totalTxIdle 5 # total number of TxIdle written to ISR
drivesys.tsunami.ethernet.totalTxOk 0 # total number of TxOk written to ISR
drivesys.tsunami.ethernet.txBandwidth 31920 # Transmit Bandwidth (bits/s)
drivesys.tsunami.ethernet.txBytes 798 # Bytes Transmitted
drivesys.tsunami.ethernet.txIpChecksums 2 # Number of tx IP Checksums done by device
drivesys.tsunami.ethernet.txPPS 25 # Packet Tranmission Rate (packets/s)
drivesys.tsunami.ethernet.txPackets 5 # Number of Packets Transmitted
drivesys.tsunami.ethernet.txTcpChecksums 2 # Number of tx TCP Checksums done by device
drivesys.tsunami.ethernet.txUdpChecksums 0 # Number of tx UDP Checksums done by device
host_inst_rate 38374803 # Simulator instruction rate (inst/s)
host_mem_usage 411180 # Number of bytes of host memory used
host_seconds 7.20 # Real time elapsed on the host
host_tick_rate 27794359444 # Simulator tick rate (ticks/s)
sim_freq 1000000000000 # Frequency of simulated ticks
sim_insts 276122825 # Number of instructions simulated
sim_seconds 0.200001 # Number of seconds simulated
sim_ticks 200000789468 # Number of ticks simulated
testsys.cpu.dtb.accesses 335402 # DTB accesses
testsys.cpu.dtb.acv 161 # DTB access violations
testsys.cpu.dtb.hits 1163399 # DTB hits
testsys.cpu.dtb.misses 3815 # DTB misses
testsys.cpu.dtb.read_accesses 225414 # DTB read accesses
testsys.cpu.dtb.read_acv 80 # DTB read access violations
testsys.cpu.dtb.read_hits 658556 # DTB read hits
testsys.cpu.dtb.read_misses 3287 # DTB read misses
testsys.cpu.dtb.write_accesses 109988 # DTB write accesses
testsys.cpu.dtb.write_acv 81 # DTB write access violations
testsys.cpu.dtb.write_hits 504843 # DTB write hits
testsys.cpu.dtb.write_misses 528 # DTB write misses
testsys.cpu.idle_fraction 0.999999 # Percentage of idle cycles
testsys.cpu.itb.accesses 1249804 # ITB accesses
testsys.cpu.itb.acv 69 # ITB acv
testsys.cpu.itb.hits 1248307 # ITB hits
testsys.cpu.itb.misses 1497 # ITB misses
testsys.cpu.kern.callpal 13124 # number of callpals executed
testsys.cpu.kern.callpal_swpctx 440 3.35% 3.35% # number of callpals executed
testsys.cpu.kern.callpal_tbi 20 0.15% 3.51% # number of callpals executed
testsys.cpu.kern.callpal_swpipl 11075 84.39% 87.89% # number of callpals executed
testsys.cpu.kern.callpal_rdps 359 2.74% 90.63% # number of callpals executed
testsys.cpu.kern.callpal_wrusp 3 0.02% 90.65% # number of callpals executed
testsys.cpu.kern.callpal_rdusp 3 0.02% 90.67% # number of callpals executed
testsys.cpu.kern.callpal_rti 1040 7.92% 98.60% # number of callpals executed
testsys.cpu.kern.callpal_callsys 140 1.07% 99.66% # number of callpals executed
testsys.cpu.kern.callpal_imb 44 0.34% 100.00% # number of callpals executed
testsys.cpu.kern.inst.arm 0 # number of arm instructions executed
testsys.cpu.kern.inst.hwrei 19054 # number of hwrei instructions executed
testsys.cpu.kern.inst.quiesce 377 # number of quiesce instructions executed
testsys.cpu.kern.ipl_count 12503 # number of times we switched to this ipl
testsys.cpu.kern.ipl_count_0 5061 40.48% 40.48% # number of times we switched to this ipl
testsys.cpu.kern.ipl_count_21 183 1.46% 41.94% # number of times we switched to this ipl
testsys.cpu.kern.ipl_count_22 205 1.64% 43.58% # number of times we switched to this ipl
testsys.cpu.kern.ipl_count_31 7054 56.42% 100.00% # number of times we switched to this ipl
testsys.cpu.kern.ipl_good 10498 # number of times we switched to this ipl from a different ipl
testsys.cpu.kern.ipl_good_0 5055 48.15% 48.15% # number of times we switched to this ipl from a different ipl
testsys.cpu.kern.ipl_good_21 183 1.74% 49.90% # number of times we switched to this ipl from a different ipl
testsys.cpu.kern.ipl_good_22 205 1.95% 51.85% # number of times we switched to this ipl from a different ipl
testsys.cpu.kern.ipl_good_31 5055 48.15% 100.00% # number of times we switched to this ipl from a different ipl
testsys.cpu.kern.ipl_ticks 199569923608 # number of cycles we spent at this ipl
testsys.cpu.kern.ipl_ticks_0 199569308038 100.00% 100.00% # number of cycles we spent at this ipl
testsys.cpu.kern.ipl_ticks_21 30857 0.00% 100.00% # number of cycles we spent at this ipl
testsys.cpu.kern.ipl_ticks_22 17630 0.00% 100.00% # number of cycles we spent at this ipl
testsys.cpu.kern.ipl_ticks_31 567083 0.00% 100.00% # number of cycles we spent at this ipl
testsys.cpu.kern.ipl_used 0.839638 # fraction of swpipl calls that actually changed the ipl
testsys.cpu.kern.ipl_used_0 0.998814 # fraction of swpipl calls that actually changed the ipl
testsys.cpu.kern.ipl_used_21 1 # fraction of swpipl calls that actually changed the ipl
testsys.cpu.kern.ipl_used_22 1 # fraction of swpipl calls that actually changed the ipl
testsys.cpu.kern.ipl_used_31 0.716615 # fraction of swpipl calls that actually changed the ipl
testsys.cpu.kern.mode_good_kernel 654
testsys.cpu.kern.mode_good_user 649
testsys.cpu.kern.mode_good_idle 5
testsys.cpu.kern.mode_switch_kernel 1100 # number of protection mode switches
testsys.cpu.kern.mode_switch_user 649 # number of protection mode switches
testsys.cpu.kern.mode_switch_idle 381 # number of protection mode switches
testsys.cpu.kern.mode_switch_good 0.614085 # fraction of useful protection mode switches
testsys.cpu.kern.mode_switch_good_kernel 0.594545 # fraction of useful protection mode switches
testsys.cpu.kern.mode_switch_good_user 1 # fraction of useful protection mode switches
testsys.cpu.kern.mode_switch_good_idle 0.013123 # fraction of useful protection mode switches
testsys.cpu.kern.mode_ticks_kernel 1821232 2.16% 2.16% # number of ticks spent at the given mode
testsys.cpu.kern.mode_ticks_user 1065606 1.26% 3.42% # number of ticks spent at the given mode
testsys.cpu.kern.mode_ticks_idle 81402474 96.58% 100.00% # number of ticks spent at the given mode
testsys.cpu.kern.swap_context 440 # number of times the context was actually changed
testsys.cpu.kern.syscall 83 # number of syscalls executed
testsys.cpu.kern.syscall_2 3 3.61% 3.61% # number of syscalls executed
testsys.cpu.kern.syscall_3 7 8.43% 12.05% # number of syscalls executed
testsys.cpu.kern.syscall_4 1 1.20% 13.25% # number of syscalls executed
testsys.cpu.kern.syscall_6 7 8.43% 21.69% # number of syscalls executed
testsys.cpu.kern.syscall_17 7 8.43% 30.12% # number of syscalls executed
testsys.cpu.kern.syscall_19 2 2.41% 32.53% # number of syscalls executed
testsys.cpu.kern.syscall_20 1 1.20% 33.73% # number of syscalls executed
testsys.cpu.kern.syscall_33 3 3.61% 37.35% # number of syscalls executed
testsys.cpu.kern.syscall_45 10 12.05% 49.40% # number of syscalls executed
testsys.cpu.kern.syscall_48 5 6.02% 55.42% # number of syscalls executed
testsys.cpu.kern.syscall_54 1 1.20% 56.63% # number of syscalls executed
testsys.cpu.kern.syscall_59 3 3.61% 60.24% # number of syscalls executed
testsys.cpu.kern.syscall_71 15 18.07% 78.31% # number of syscalls executed
testsys.cpu.kern.syscall_74 4 4.82% 83.13% # number of syscalls executed
testsys.cpu.kern.syscall_97 2 2.41% 85.54% # number of syscalls executed
testsys.cpu.kern.syscall_98 2 2.41% 87.95% # number of syscalls executed
testsys.cpu.kern.syscall_101 2 2.41% 90.36% # number of syscalls executed
testsys.cpu.kern.syscall_102 2 2.41% 92.77% # number of syscalls executed
testsys.cpu.kern.syscall_104 1 1.20% 93.98% # number of syscalls executed
testsys.cpu.kern.syscall_105 3 3.61% 97.59% # number of syscalls executed
testsys.cpu.kern.syscall_118 2 2.41% 100.00% # number of syscalls executed
testsys.cpu.not_idle_fraction 0.000001 # Percentage of non-idle cycles
testsys.cpu.numCycles 3566237 # number of cpu cycles simulated
testsys.cpu.num_insts 3564671 # Number of instructions executed
testsys.cpu.num_refs 1173698 # Number of memory references
testsys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
testsys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
testsys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD).
testsys.disk0.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
testsys.disk0.dma_write_full_pages 0 # Number of full page size DMA writes.
testsys.disk0.dma_write_txs 0 # Number of DMA write transactions.
testsys.disk2.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
testsys.disk2.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
testsys.disk2.dma_read_txs 0 # Number of DMA read transactions (not PRD).
testsys.disk2.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
testsys.disk2.dma_write_full_pages 0 # Number of full page size DMA writes.
testsys.disk2.dma_write_txs 0 # Number of DMA write transactions.
testsys.tsunami.ethernet.coalescedRxDesc 0 # average number of RxDesc's coalesced into each post
testsys.tsunami.ethernet.coalescedRxIdle 0 # average number of RxIdle's coalesced into each post
testsys.tsunami.ethernet.coalescedRxOk 0 # average number of RxOk's coalesced into each post
testsys.tsunami.ethernet.coalescedRxOrn 0 # average number of RxOrn's coalesced into each post
testsys.tsunami.ethernet.coalescedSwi 0 # average number of Swi's coalesced into each post
testsys.tsunami.ethernet.coalescedTotal 1 # average number of interrupts coalesced into each post
testsys.tsunami.ethernet.coalescedTxDesc 0 # average number of TxDesc's coalesced into each post
testsys.tsunami.ethernet.coalescedTxIdle 1 # average number of TxIdle's coalesced into each post
testsys.tsunami.ethernet.coalescedTxOk 0 # average number of TxOk's coalesced into each post
testsys.tsunami.ethernet.descDMAReads 8 # Number of descriptors the device read w/ DMA
testsys.tsunami.ethernet.descDMAWrites 13 # Number of descriptors the device wrote w/ DMA
testsys.tsunami.ethernet.descDmaReadBytes 192 # number of descriptor bytes read w/ DMA
testsys.tsunami.ethernet.descDmaWriteBytes 104 # number of descriptor bytes write w/ DMA
testsys.tsunami.ethernet.droppedPackets 0 # number of packets dropped
testsys.tsunami.ethernet.postedInterrupts 10 # number of posts to CPU
testsys.tsunami.ethernet.postedRxDesc 4 # number of RxDesc interrupts posted to CPU
testsys.tsunami.ethernet.postedRxIdle 0 # number of rxIdle interrupts posted to CPU
testsys.tsunami.ethernet.postedRxOk 0 # number of RxOk interrupts posted to CPU
testsys.tsunami.ethernet.postedRxOrn 0 # number of RxOrn posted to CPU
testsys.tsunami.ethernet.postedSwi 0 # number of software interrupts posted to CPU
testsys.tsunami.ethernet.postedTxDesc 0 # number of TxDesc interrupts posted to CPU
testsys.tsunami.ethernet.postedTxIdle 6 # number of TxIdle interrupts posted to CPU
testsys.tsunami.ethernet.postedTxOk 0 # number of TxOk interrupts posted to CPU
testsys.tsunami.ethernet.rxBandwidth 31920 # Receive Bandwidth (bits/s)
testsys.tsunami.ethernet.rxBytes 798 # Bytes Received
testsys.tsunami.ethernet.rxIpChecksums 5 # Number of rx IP Checksums done by device
testsys.tsunami.ethernet.rxPPS 25 # Packet Reception Rate (packets/s)
testsys.tsunami.ethernet.rxPackets 5 # Number of Packets Received
testsys.tsunami.ethernet.rxTcpChecksums 5 # Number of rx TCP Checksums done by device
testsys.tsunami.ethernet.rxUdpChecksums 0 # Number of rx UDP Checksums done by device
testsys.tsunami.ethernet.totBandwidth 70320 # Total Bandwidth (bits/s)
testsys.tsunami.ethernet.totBytes 1758 # Total Bytes
testsys.tsunami.ethernet.totPackets 13 # Total Packets
testsys.tsunami.ethernet.totalRxDesc 5 # total number of RxDesc written to ISR
testsys.tsunami.ethernet.totalRxIdle 0 # total number of RxIdle written to ISR
testsys.tsunami.ethernet.totalRxOk 0 # total number of RxOk written to ISR
testsys.tsunami.ethernet.totalRxOrn 0 # total number of RxOrn written to ISR
testsys.tsunami.ethernet.totalSwi 0 # total number of Swi written to ISR
testsys.tsunami.ethernet.totalTxDesc 0 # total number of TxDesc written to ISR
testsys.tsunami.ethernet.totalTxIdle 8 # total number of TxIdle written to ISR
testsys.tsunami.ethernet.totalTxOk 0 # total number of TxOk written to ISR
testsys.tsunami.ethernet.txBandwidth 38400 # Transmit Bandwidth (bits/s)
testsys.tsunami.ethernet.txBytes 960 # Bytes Transmitted
testsys.tsunami.ethernet.txIpChecksums 2 # Number of tx IP Checksums done by device
testsys.tsunami.ethernet.txPPS 40 # Packet Tranmission Rate (packets/s)
testsys.tsunami.ethernet.txPackets 8 # Number of Packets Transmitted
testsys.tsunami.ethernet.txTcpChecksums 2 # Number of tx TCP Checksums done by device
testsys.tsunami.ethernet.txUdpChecksums 0 # Number of tx UDP Checksums done by device
---------- End Simulation Statistics ----------
---------- Begin Simulation Statistics ----------
drivesys.cpu.dtb.accesses 0 # DTB accesses
drivesys.cpu.dtb.acv 0 # DTB access violations
drivesys.cpu.dtb.hits 0 # DTB hits
drivesys.cpu.dtb.misses 0 # DTB misses
drivesys.cpu.dtb.read_accesses 0 # DTB read accesses
drivesys.cpu.dtb.read_acv 0 # DTB read access violations
drivesys.cpu.dtb.read_hits 0 # DTB read hits
drivesys.cpu.dtb.read_misses 0 # DTB read misses
drivesys.cpu.dtb.write_accesses 0 # DTB write accesses
drivesys.cpu.dtb.write_acv 0 # DTB write access violations
drivesys.cpu.dtb.write_hits 0 # DTB write hits
drivesys.cpu.dtb.write_misses 0 # DTB write misses
drivesys.cpu.idle_fraction 1 # Percentage of idle cycles
drivesys.cpu.itb.accesses 0 # ITB accesses
drivesys.cpu.itb.acv 0 # ITB acv
drivesys.cpu.itb.hits 0 # ITB hits
drivesys.cpu.itb.misses 0 # ITB misses
drivesys.cpu.kern.inst.arm 0 # number of arm instructions executed
drivesys.cpu.kern.inst.hwrei 0 # number of hwrei instructions executed
drivesys.cpu.kern.inst.quiesce 0 # number of quiesce instructions executed
drivesys.cpu.kern.mode_good_kernel 0
drivesys.cpu.kern.mode_good_user 0
drivesys.cpu.kern.mode_good_idle 0
drivesys.cpu.kern.mode_switch_kernel 0 # number of protection mode switches
drivesys.cpu.kern.mode_switch_user 0 # number of protection mode switches
drivesys.cpu.kern.mode_switch_idle 0 # number of protection mode switches
drivesys.cpu.kern.mode_switch_good <err: div-0> # fraction of useful protection mode switches
drivesys.cpu.kern.mode_switch_good_kernel <err: div-0> # fraction of useful protection mode switches
drivesys.cpu.kern.mode_switch_good_user <err: div-0> # fraction of useful protection mode switches
drivesys.cpu.kern.mode_switch_good_idle <err: div-0> # fraction of useful protection mode switches
drivesys.cpu.kern.mode_ticks_kernel 0 # number of ticks spent at the given mode
drivesys.cpu.kern.mode_ticks_user 0 # number of ticks spent at the given mode
drivesys.cpu.kern.mode_ticks_idle 0 # number of ticks spent at the given mode
drivesys.cpu.kern.swap_context 0 # number of times the context was actually changed
drivesys.cpu.not_idle_fraction 0 # Percentage of non-idle cycles
drivesys.cpu.numCycles 0 # number of cpu cycles simulated
drivesys.cpu.num_insts 0 # Number of instructions executed
drivesys.cpu.num_refs 0 # Number of memory references
drivesys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
drivesys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
drivesys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD).
drivesys.disk0.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
drivesys.disk0.dma_write_full_pages 0 # Number of full page size DMA writes.
drivesys.disk0.dma_write_txs 0 # Number of DMA write transactions.
drivesys.disk2.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
drivesys.disk2.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
drivesys.disk2.dma_read_txs 0 # Number of DMA read transactions (not PRD).
drivesys.disk2.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
drivesys.disk2.dma_write_full_pages 0 # Number of full page size DMA writes.
drivesys.disk2.dma_write_txs 0 # Number of DMA write transactions.
drivesys.tsunami.ethernet.coalescedRxDesc <err: div-0> # average number of RxDesc's coalesced into each post
drivesys.tsunami.ethernet.coalescedRxIdle <err: div-0> # average number of RxIdle's coalesced into each post
drivesys.tsunami.ethernet.coalescedRxOk <err: div-0> # average number of RxOk's coalesced into each post
drivesys.tsunami.ethernet.coalescedRxOrn <err: div-0> # average number of RxOrn's coalesced into each post
drivesys.tsunami.ethernet.coalescedSwi <err: div-0> # average number of Swi's coalesced into each post
drivesys.tsunami.ethernet.coalescedTotal <err: div-0> # average number of interrupts coalesced into each post
drivesys.tsunami.ethernet.coalescedTxDesc <err: div-0> # average number of TxDesc's coalesced into each post
drivesys.tsunami.ethernet.coalescedTxIdle <err: div-0> # average number of TxIdle's coalesced into each post
drivesys.tsunami.ethernet.coalescedTxOk <err: div-0> # average number of TxOk's coalesced into each post
drivesys.tsunami.ethernet.descDMAReads 0 # Number of descriptors the device read w/ DMA
drivesys.tsunami.ethernet.descDMAWrites 0 # Number of descriptors the device wrote w/ DMA
drivesys.tsunami.ethernet.descDmaReadBytes 0 # number of descriptor bytes read w/ DMA
drivesys.tsunami.ethernet.descDmaWriteBytes 0 # number of descriptor bytes write w/ DMA
drivesys.tsunami.ethernet.droppedPackets 0 # number of packets dropped
drivesys.tsunami.ethernet.postedInterrupts 0 # number of posts to CPU
drivesys.tsunami.ethernet.postedRxDesc 0 # number of RxDesc interrupts posted to CPU
drivesys.tsunami.ethernet.postedRxIdle 0 # number of rxIdle interrupts posted to CPU
drivesys.tsunami.ethernet.postedRxOk 0 # number of RxOk interrupts posted to CPU
drivesys.tsunami.ethernet.postedRxOrn 0 # number of RxOrn posted to CPU
drivesys.tsunami.ethernet.postedSwi 0 # number of software interrupts posted to CPU
drivesys.tsunami.ethernet.postedTxDesc 0 # number of TxDesc interrupts posted to CPU
drivesys.tsunami.ethernet.postedTxIdle 0 # number of TxIdle interrupts posted to CPU
drivesys.tsunami.ethernet.postedTxOk 0 # number of TxOk interrupts posted to CPU
drivesys.tsunami.ethernet.totalRxDesc 0 # total number of RxDesc written to ISR
drivesys.tsunami.ethernet.totalRxIdle 0 # total number of RxIdle written to ISR
drivesys.tsunami.ethernet.totalRxOk 0 # total number of RxOk written to ISR
drivesys.tsunami.ethernet.totalRxOrn 0 # total number of RxOrn written to ISR
drivesys.tsunami.ethernet.totalSwi 0 # total number of Swi written to ISR
drivesys.tsunami.ethernet.totalTxDesc 0 # total number of TxDesc written to ISR
drivesys.tsunami.ethernet.totalTxIdle 0 # total number of TxIdle written to ISR
drivesys.tsunami.ethernet.totalTxOk 0 # total number of TxOk written to ISR
host_inst_rate 76361400719 # Simulator instruction rate (inst/s)
host_mem_usage 411180 # Number of bytes of host memory used
host_seconds 0.00 # Real time elapsed on the host
host_tick_rate 203621244 # Simulator tick rate (ticks/s)
sim_freq 1000000000000 # Frequency of simulated ticks
sim_insts 276122825 # Number of instructions simulated
sim_seconds 0.000001 # Number of seconds simulated
sim_ticks 785978 # Number of ticks simulated
testsys.cpu.dtb.accesses 0 # DTB accesses
testsys.cpu.dtb.acv 0 # DTB access violations
testsys.cpu.dtb.hits 0 # DTB hits
testsys.cpu.dtb.misses 0 # DTB misses
testsys.cpu.dtb.read_accesses 0 # DTB read accesses
testsys.cpu.dtb.read_acv 0 # DTB read access violations
testsys.cpu.dtb.read_hits 0 # DTB read hits
testsys.cpu.dtb.read_misses 0 # DTB read misses
testsys.cpu.dtb.write_accesses 0 # DTB write accesses
testsys.cpu.dtb.write_acv 0 # DTB write access violations
testsys.cpu.dtb.write_hits 0 # DTB write hits
testsys.cpu.dtb.write_misses 0 # DTB write misses
testsys.cpu.idle_fraction 1 # Percentage of idle cycles
testsys.cpu.itb.accesses 0 # ITB accesses
testsys.cpu.itb.acv 0 # ITB acv
testsys.cpu.itb.hits 0 # ITB hits
testsys.cpu.itb.misses 0 # ITB misses
testsys.cpu.kern.inst.arm 0 # number of arm instructions executed
testsys.cpu.kern.inst.hwrei 0 # number of hwrei instructions executed
testsys.cpu.kern.inst.quiesce 0 # number of quiesce instructions executed
testsys.cpu.kern.mode_good_kernel 0
testsys.cpu.kern.mode_good_user 0
testsys.cpu.kern.mode_good_idle 0
testsys.cpu.kern.mode_switch_kernel 0 # number of protection mode switches
testsys.cpu.kern.mode_switch_user 0 # number of protection mode switches
testsys.cpu.kern.mode_switch_idle 0 # number of protection mode switches
testsys.cpu.kern.mode_switch_good <err: div-0> # fraction of useful protection mode switches
testsys.cpu.kern.mode_switch_good_kernel <err: div-0> # fraction of useful protection mode switches
testsys.cpu.kern.mode_switch_good_user <err: div-0> # fraction of useful protection mode switches
testsys.cpu.kern.mode_switch_good_idle <err: div-0> # fraction of useful protection mode switches
testsys.cpu.kern.mode_ticks_kernel 0 # number of ticks spent at the given mode
testsys.cpu.kern.mode_ticks_user 0 # number of ticks spent at the given mode
testsys.cpu.kern.mode_ticks_idle 0 # number of ticks spent at the given mode
testsys.cpu.kern.swap_context 0 # number of times the context was actually changed
testsys.cpu.not_idle_fraction 0 # Percentage of non-idle cycles
testsys.cpu.numCycles 0 # number of cpu cycles simulated
testsys.cpu.num_insts 0 # Number of instructions executed
testsys.cpu.num_refs 0 # Number of memory references
testsys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
testsys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
testsys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD).
testsys.disk0.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
testsys.disk0.dma_write_full_pages 0 # Number of full page size DMA writes.
testsys.disk0.dma_write_txs 0 # Number of DMA write transactions.
testsys.disk2.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
testsys.disk2.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
testsys.disk2.dma_read_txs 0 # Number of DMA read transactions (not PRD).
testsys.disk2.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
testsys.disk2.dma_write_full_pages 0 # Number of full page size DMA writes.
testsys.disk2.dma_write_txs 0 # Number of DMA write transactions.
testsys.tsunami.ethernet.coalescedRxDesc <err: div-0> # average number of RxDesc's coalesced into each post
testsys.tsunami.ethernet.coalescedRxIdle <err: div-0> # average number of RxIdle's coalesced into each post
testsys.tsunami.ethernet.coalescedRxOk <err: div-0> # average number of RxOk's coalesced into each post
testsys.tsunami.ethernet.coalescedRxOrn <err: div-0> # average number of RxOrn's coalesced into each post
testsys.tsunami.ethernet.coalescedSwi <err: div-0> # average number of Swi's coalesced into each post
testsys.tsunami.ethernet.coalescedTotal <err: div-0> # average number of interrupts coalesced into each post
testsys.tsunami.ethernet.coalescedTxDesc <err: div-0> # average number of TxDesc's coalesced into each post
testsys.tsunami.ethernet.coalescedTxIdle <err: div-0> # average number of TxIdle's coalesced into each post
testsys.tsunami.ethernet.coalescedTxOk <err: div-0> # average number of TxOk's coalesced into each post
testsys.tsunami.ethernet.descDMAReads 0 # Number of descriptors the device read w/ DMA
testsys.tsunami.ethernet.descDMAWrites 0 # Number of descriptors the device wrote w/ DMA
testsys.tsunami.ethernet.descDmaReadBytes 0 # number of descriptor bytes read w/ DMA
testsys.tsunami.ethernet.descDmaWriteBytes 0 # number of descriptor bytes write w/ DMA
testsys.tsunami.ethernet.droppedPackets 0 # number of packets dropped
testsys.tsunami.ethernet.postedInterrupts 0 # number of posts to CPU
testsys.tsunami.ethernet.postedRxDesc 0 # number of RxDesc interrupts posted to CPU
testsys.tsunami.ethernet.postedRxIdle 0 # number of rxIdle interrupts posted to CPU
testsys.tsunami.ethernet.postedRxOk 0 # number of RxOk interrupts posted to CPU
testsys.tsunami.ethernet.postedRxOrn 0 # number of RxOrn posted to CPU
testsys.tsunami.ethernet.postedSwi 0 # number of software interrupts posted to CPU
testsys.tsunami.ethernet.postedTxDesc 0 # number of TxDesc interrupts posted to CPU
testsys.tsunami.ethernet.postedTxIdle 0 # number of TxIdle interrupts posted to CPU
testsys.tsunami.ethernet.postedTxOk 0 # number of TxOk interrupts posted to CPU
testsys.tsunami.ethernet.totalRxDesc 0 # total number of RxDesc written to ISR
testsys.tsunami.ethernet.totalRxIdle 0 # total number of RxIdle written to ISR
testsys.tsunami.ethernet.totalRxOk 0 # total number of RxOk written to ISR
testsys.tsunami.ethernet.totalRxOrn 0 # total number of RxOrn written to ISR
testsys.tsunami.ethernet.totalSwi 0 # total number of Swi written to ISR
testsys.tsunami.ethernet.totalTxDesc 0 # total number of TxDesc written to ISR
testsys.tsunami.ethernet.totalTxIdle 0 # total number of TxIdle written to ISR
testsys.tsunami.ethernet.totalTxOk 0 # total number of TxOk written to ISR
---------- End Simulation Statistics ----------

View file

@ -0,0 +1,8 @@
0: testsys.tsunami.io.rtc: Real-time clock set to Sun Jan 1 00:00:00 2006
Listening for console connection on port 3456
0: drivesys.tsunami.io.rtc: Real-time clock set to Sun Jan 1 00:00:00 2006
Listening for console connection on port 3457
0: testsys.remote_gdb.listener: listening for remote gdb #0 on port 7000
0: drivesys.remote_gdb.listener: listening for remote gdb #1 on port 7001
warn: Entering event queue @ 0. Starting simulation...
warn: Obsolete M5 instruction ivlb encountered.

View file

@ -0,0 +1,17 @@
M5 Simulator System
Copyright (c) 2001-2006
The Regents of The University of Michigan
All Rights Reserved
M5 compiled Nov 29 2006 16:48:25
M5 started Fri Dec 1 01:07:49 2006
M5 executing on zed.eecs.umich.edu
command line: build/ALPHA_FS/m5.opt -d build/ALPHA_FS/tests/opt/long/80.netperf-stream/alpha/linux/twosys-tsunami-simple-atomic tests/run.py long/80.netperf-stream/alpha/linux/twosys-tsunami-simple-atomic
WTF
9685900: testsys.sim_console: attach console 0
3327958029: drivesys.sim_console: attach console 0
Resetting stats at cycle 4100234765800!
Resetting stats at cycle 4300235555268!
Exiting @ tick 4300236341246 because checkpoint

View file

@ -0,0 +1,2 @@