Beware that using size() on a list is a O(n) operation.
dev/ns_gige.hh:
Remove typedefs that (I assume) were copied over from etherdev.hh. They were unused in the ns_gige code.
--HG--
extra : convert_revision : 577954ec26b899bd6329ce6a4aaa1d9b0ba4f34c
SConscript:
The new faults.cc file in sim allocates the system wide faults. When these faults are generated through a function interface in the ISA, this file may go away.
arch/alpha/alpha_memory.cc:
Changed Fault to Fault * and took the underscores out of fault names.
arch/alpha/alpha_memory.hh:
Changed Fault to Fault *. Also, added an include for the alpha faults.
arch/alpha/ev5.cc:
Changed the fault_addr array into a fault_addr function. Once all of the faults can be expected to have the same type, fault_addr can go away completely and the info it provided will come from the fault itself. Also, Fault was changed to Fault *, and underscores were taken out of fault names.
arch/alpha/isa/decoder.isa:
Changed Fault to Fault * and took the underscores out fault names.
arch/alpha/isa/fp.isa:
Changed Fault to Fault *, and took the underscores out of fault names.
arch/alpha/isa/main.isa:
Changed Fault to Fault *, removed underscores from fault names, and made an include of the alpha faults show up in all the generated files.
arch/alpha/isa/mem.isa:
Changed Fault to Fault * and removed underscores from fault names.
arch/alpha/isa/unimp.isa:
arch/alpha/isa/unknown.isa:
cpu/exec_context.hh:
cpu/ozone/cpu.hh:
cpu/simple/cpu.cc:
dev/alpha_console.cc:
dev/ide_ctrl.cc:
dev/isa_fake.cc:
dev/pciconfigall.cc:
dev/pcidev.cc:
dev/pcidev.hh:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
Changed Fault to Fault *, and removed underscores from fault names.
arch/alpha/isa_traits.hh:
Changed the include of arch/alpha/faults.hh to sim/faults.hh, since the alpha faults weren't needed.
cpu/base_dyn_inst.cc:
Changed Fault to Fault *, and removed underscores from fault names. This file probably shouldn't use the Unimplemented Opcode fault.
cpu/base_dyn_inst.hh:
Changed Fault to Fault * and took the underscores out of the fault names.
cpu/exec_context.cc:
cpu/o3/alpha_dyn_inst.hh:
cpu/o3/alpha_dyn_inst_impl.hh:
cpu/o3/fetch.hh:
dev/alpha_console.hh:
dev/baddev.hh:
dev/ide_ctrl.hh:
dev/isa_fake.hh:
dev/ns_gige.hh:
dev/pciconfigall.hh:
dev/sinic.hh:
dev/tsunami_cchip.hh:
dev/tsunami_io.hh:
dev/tsunami_pchip.hh:
dev/uart.hh:
dev/uart8250.hh:
Changed Fault to Fault *.
cpu/o3/alpha_cpu.hh:
Changed Fault to Fault *, removed underscores from fault names.
cpu/o3/alpha_cpu_impl.hh:
Changed Fault to Fault *, removed underscores from fault names, and changed the fault_addr array to the fault_addr function. Once all faults are from the ISA, this function will probably go away.
cpu/o3/commit_impl.hh:
cpu/o3/fetch_impl.hh:
dev/baddev.cc:
Changed Fault to Fault *, and removed underscores from the fault names.
cpu/o3/regfile.hh:
Added an include for the alpha specific faults which will hopefully go away once the ipr stuff is moved, changed Fault to Fault *, and removed the underscores from fault names.
cpu/simple/cpu.hh:
Changed Fault to Fault *
dev/ns_gige.cc:
Changed Fault to Fault *, and removdd underscores from fault names.
dev/sinic.cc:
Changed Fault to Fault *, and removed the underscores from fault names.
dev/uart8250.cc:
Chanted Fault to Fault *, and removed underscores from fault names.
kern/kernel_stats.cc:
Removed underscores from fault names, and from NumFaults.
kern/kernel_stats.hh:
Changed the predeclaration of Fault from an enum to a class, and changd the "fault" function to work with the classes instead of the enum. Once there are no system wide faults anymore, this code will simplify back to something like it was originally.
sim/faults.cc:
This allocates the system wide faults.
sim/faults.hh:
This declares the system wide faults.
sim/syscall_emul.cc:
sim/syscall_emul.hh:
Removed the underscores from fault names.
--HG--
rename : arch/alpha/faults.cc => sim/faults.cc
rename : arch/alpha/faults.hh => sim/faults.hh
extra : convert_revision : 253d39258237333ae8ec4d8047367cb3ea68569d
SConscript:
Moved isa_fullsys_traits.hh out of targetarch, since the only place it's included, and the only place the comments in the file say it should be included, is in the alpha isa_traits.hh
targetarch/isa_traits.hh is now included through arch/isa_traits.hh
vptr.hh was removed from targetarch, and moved to sim
arch/alpha/pseudo_inst.cc:
Moved vptr.hh from targetarch to sim
base/loader/object_file.hh:
base/loader/symtab.hh:
cpu/base.hh:
dev/ide_disk.cc:
Changed the include of isa_traits.hh from targetarch to arch
cpu/static_inst.hh:
dev/platform.hh:
dev/simple_disk.hh:
kern/tru64/dump_mbuf.cc:
kern/tru64/mbuf.hh:
kern/tru64/tru64_events.cc:
kern/tru64/tru64_system.cc:
kern/tru64/tru64_system.hh:
sim/process.hh:
sim/syscall_emul.hh:
Changed the include of isa_traits.hh from targetarch to arch.
kern/linux/linux_threadinfo.hh:
Changed the include of vptr.hh from targetarch to sim.
sim/byteswap.hh:
Removed the line declaring swap_byte(long), since it ambiguates with swap_byte(int32_t)
sim/vptr.hh:
Fixed the assert in the equals operator.
Changed the AlphaISA namespace reference to TheISA.
Changed arch/alpha/vtophys.hh to targetarch/vtophys.hh, since this file is now for all architectures.
Added an include of arch/isa_traits.hh so that TheISA would be defined.
--HG--
extra : convert_revision : e3c6ac17ed0277cfeba1d35cd63eba66eba5996f
arch/alpha/alpha_linux_process.cc:
arch/alpha/alpha_tru64_process.cc:
Added the endianness namespace. This may change.
cpu/exec_context.hh:
Changed the include path for byteswap, and forced LittleEndianness for lack of a better solution.
cpu/o3/alpha_cpu.hh:
Forced LittleEndianness, for lack of a better solution.
cpu/o3/alpha_cpu_impl.hh:
Cleared away some commented out code.
cpu/o3/fetch_impl.hh:
Changed the include patch for byteswap, and forced LittleEndianness for lack of a better solution.
cpu/simple/cpu.cc:
Added an include for byteswap.hh, and fixed the SimpleCPU to LittleEndian. This cpu only does alpha, so that's fine.
dev/disk_image.cc:
Changed the include path of byteswap.hh
kern/freebsd/freebsd_system.cc:
kern/linux/linux_system.cc:
Added an include for byteswap.hh, and forced LittleEndianness for lack of a better solution.
sim/system.cc:
Forced LittleEndianness for lack of a better solution.
--HG--
extra : convert_revision : b95d3e1265a825e04bd77622a3ac09fbac6bd206
dev/pktfifo.hh:
we can't modify i because it's used further down to remove
the packet from the fifo. Instead, copy the iterator and
modify that to get the previous packet.
dev/sinic.cc:
- don't change the transmit state and kick the machine unless
we're at the head of the txList.
- add a couple of debugging statements to figure out how far
along we've gotten in processing a packet.
- assert that the current tx vnic has something to do when
we start processing the state machine.
--HG--
extra : convert_revision : 588fe2c7d810be0e3d8d39c5cc0ec8a72119517e
separate the rx thread and tx thread and get rid of the dedicated flag.
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/ns_gige_reg.h:
python/m5/objects/Ethernet.py:
dedicated flag goes away, we have new individual flags for
rx thread and tx thread
dev/sinic.cc:
Virtualize sinic
- The io registers are replicated many times in memory, allowing the NIC to
differentiate among several virtual interfaces.
- On the TX side, this allows multiple CPUs to initiate transmits at the same
time without locking in the software. If a partial packet is transmitted,
then the state machine blocks waiting for that virtual interface to complete
its packet. Then the state machine will move on to the next virtual
interface. The commands are kept in fifo order.
- On the RX side, multiple partial transmits can be simultaneously done.
Though a packet does not deallocate its fifo space until all preceeding
packets in the fifo are deallocated. To enable multiple receives, it
is necessary for each virtual nic to keep its own information about its
progress through the state machine.
dev/sinic.hh:
Virtualize sinic
Receive state must be virtualized since we allow the receipt of packets in
parallel.
dev/sinicreg.hh:
Virtualize sinic
separate rx thread and tx thread
create a soft interrupt and add a command to trigger it.
pad out the reserved bits in the RxDone and TxDone regs
--HG--
extra : convert_revision : c10bb23a46a89ffd1e08866c1f1621cb98069205
and to remove elements in the middle of the fifo. These elements
do not free space, they are just marked removed. Space is only
freed from the front of the fifo.
dev/etherpkt.cc:
serialize the current slack
dev/etherpkt.hh:
add "slack" to the ethernet packet. It is to be used by any fifo that
the packet is currently in to account for extra space that the packet
may be occupying due to the fifo organization.
--HG--
extra : convert_revision : 8e7c541ba316a9a76495c54cc5f707f8fc65b6d5
output for sinic
dev/sinic.cc:
add the cpu number of the request to various panic and trace
output
--HG--
extra : convert_revision : e778a5c925e194652bec47af678488acf48c1ae0
dev/ns_gige.cc:
add support for delaying pio writes until the cache access occurs
the only write we delay are for CR_TXE and CR_RXE
dev/sinic.cc:
dev/sinic.hh:
the txPioRequest and rxPioRequest things were more or less bogus
add support for delaying pio writes until the cache access occurs
dev/sinicreg.hh:
Add delay_read and delay_write to the register information struct
for now, we won't delay any reads, and we'll delay the writes that
initiate DMAs
python/m5/objects/Ethernet.py:
add a parameter to delay pio writes until the timing access
actually occurs.
--HG--
extra : convert_revision : 79b18ea2812c2935d7d5ea6eff1f55265114d05d
pci device base class
dev/sinic.cc:
dev/sinic.hh:
use the new readBar/writeBar stuff that's in the pci device
base class
--HG--
extra : convert_revision : 8a0b2bde3cc13597785d6ea75d6e6811680bb01b
makes it easier to implement PCI device models.
dev/pcidev.cc:
default implementations for read/write and readBarX/writeBarX functions
--HG--
extra : convert_revision : bbe2e2a2a506e2dd94d98f8e0feaefef96380be9
can specify either independently.
python/m5/objects/Device.py:
io_bus is split out into pio_bus and dma_bus so that any device
can specify either independently.
dma_bus defaults to point to whatever pio_bus uses.
--HG--
extra : convert_revision : d35d5374d0bf592f6b5df465c05203577b8b8763
base/random.cc:
Change normal random function to Xrand48 so we have one source of
randomness for everything.
base/random.hh:
Add uniform distribution ability to random functions
dev/etherlink.cc:
dev/etherlink.hh:
Add ability to slightly perturb latency of ethernet
--HG--
extra : convert_revision : f7f856761fd525c233ae2a6d993b1fd702b488f7
interrupts.
dev/sinic.cc:
- The prepareRead function sets all the variables in the register
file that depend on various state bits that change on the fly.
Includes RxDone, RxWait, TxDone, and TxWait
- Use the new register information accessor functions to grab
validity and size information for the read and write functions
- read all registers directly from the register space by offset
and size, not by actual name (less code)
- The side effect of reading the interrupt status (clearing it) now
happens outside the actual chunk of code where the value is loaded.
- Add an iprRead function for when we may want speculative access
to device registers through an ipr or special instruction.
- When RxData or TxData are written, their busy flag is set to
indicate that they have an outstanding transaction.
- The RxHigh and TxLow interrupts are special, they only interrupt
if the rxEmpty or txFull limits were hit
- Move reset to the command register
- Update more registers on reset, clear rxEmpty and txFull
- Data dumps only happen if EthernetData trace flag set
- When a DMA completes, kick the other engine if it was waiting
- implement all of the new interrupts
- serialize the new stuff
dev/sinic.hh:
- Put all registers with their proper size and alignment into
the regs struct so that we can copy multiple at a time.
- Provide accessor functions for accessing the registers with
different sizes.
- Flags to track when the rx fifo hit empty and the tx fifo became
full. These flags are used to determine what to do when below
the watermarks, and are reset when crossing the watermark.
- the txDmaEvent should actually trigger the txDmaDone function
- Add an iprRead function for when we may want speculative access
to device registers through an ipr or special instruction.
- The prepareRead function sets all the variables in the register
file that depend on various state bits that change on the fly.
- add rx_max_intr and dedicated (for dedicated thread) config params
dev/sinicreg.hh:
Add some new registers: Command, RxMaxIntr, RxFifoSize, TxFifoSize,
rename XxThreshold to XxFifoMark
Move Reset to the Command register
Add Thread to the Config register
New interrupts, better names
More info in RxDone and TxDone
Easier access to information on each register (size, read, write, name)
python/m5/objects/Ethernet.py:
Both sinic and nsgige have the dedicated thread
Add a parameter to configure the maximum number for receive
packets per interrupt
--HG--
extra : convert_revision : 407c5a993b6fb17326b4c623ee5d4b25fd69ac80
dev/ns_gige.cc:
why call it pio2 when there's only one?
dev/sinic.cc:
Give the interface a different name for stats/output purposes
--HG--
extra : convert_revision : 895732f1a7e4c53e058a42b51320c2115dc05638
automatically happens in the interface after the packet
is delivered to the device.
--HG--
extra : convert_revision : 07890c4c5ce83fe709ce203f66c330d7cd631235
Create EtherDevBase which both Sinic and NSGigE derive from
bump fifos
drop rx max copy size to 1514 bytes to be friendlier with linux
default interrupt delay is 10us
dev/ns_gige.cc:
Shuffle around parameters to make it easier to find stuff
dev/sinic.cc:
Shuffle around parameters to make it easier to find stuff
rename cycleTime -> clock
dev/sinic.hh:
rename cycleTime -> clock
--HG--
extra : convert_revision : a673bee875e50d083098991aea20972fa8d5b5c7
dev/ns_gige.cc:
stop exposing the m5reg to the configuration stuff and build it
based on exposed flags. Expose dedicated now.
dev/ns_gige.hh:
goodbye m5reg hello dedicated
dev/ns_gige_reg.h:
Flags for the M5REG
--HG--
extra : convert_revision : 11134fe67cdf5291caacf9b3041739c437b983e3
dev/ns_gige.cc:
Add support for 64-bit addresses
dev/ns_gige.hh:
dev/ns_gige_reg.h:
Need both cached 32-bit and 64-bit descriptors
--HG--
extra : convert_revision : 514788d8d95554b3512f1b75db5314c823453a8c
modes 4 *and below*, not just mode 4.
dev/ide_disk.cc:
Fix UDMA mode support mask to actually reflect support for
modes 4 *and below*, not just mode 4.
--HG--
extra : convert_revision : 3506d503a5e8ce8a8686fb3a552383d365be0d41
dev/ns_gige.cc:
clean up usage of ISR_FOO macros
dev/ns_gige_reg.h:
Clean up #defines
make ISR_RXIDLE and ISR_TXIDLE coalesced
--HG--
extra : convert_revision : fd64fc6a441d096fc45737fdcb837de8868ca10a
dev/etherdump.cc:
no default parameters anymore they should be in python
python/m5/objects/Ethernet.py:
move the maxlen parameter for EtherDump into python
--HG--
extra : convert_revision : a796353a68907dfeb22059cd3ad536e6e8f60998
base/mysql.hh:
include mysql_version to get rid of that annoying mysql error.
make sure refcount is set in all constructors
base/pollevent.hh:
dev/ethertap.hh:
dev/pciconfigall.hh:
dev/tsunami_cchip.hh:
dev/tsunami_io.hh:
dev/tsunami_pchip.hh:
sim/param.cc:
fix for gcc 4
--HG--
extra : convert_revision : be626af2f40ca402818996ef27249ae256c63ef1
objects. The improper serialization of arrays was particularly
bad.
dev/alpha_console.cc:
dev/isa_fake.cc:
dev/ns_gige.cc:
dev/pciconfigall.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
the pio interface is a different simobject and should have a
different name.
dev/ethertap.cc:
fix serialization.
dev/ide_ctrl.cc:
- the pio interface is a different simobject and should have a
different name.
- properly initialize variables
- When serializing an array, the size is the number of elements,
not the number of bytes!
dev/pcidev.cc:
When serializing an array, the size is the number of elements,
not the number of bytes!
dev/tsunami_io.hh:
Don't make objects SimObjects if they're not exposed to python.
Don't add serialization functions to events, it's generally not
what you want.
allow the real time clock and interval timer to serialize themselves,
must pass a base name since it is not a SimObject and the values will
be going into the section of the parent.
--HG--
extra : convert_revision : 3fc5de9b858ed770c8f385cf38b53242cf859c33
base/remote_gdb.cc:
use snprintf, it's safer
dev/ide_disk.cc:
use strncpy instead of snprintf
--HG--
extra : convert_revision : 90455e3f6bcb4c771724298a5a0b79a5b483a85c
README:
Clarify cygwin EIO error explanation.
build/SConstruct:
Cygwin header files cause uninitialized var warnings.
dev/ide_ctrl.cc:
Get rid of unnecessary byte-swap calls, some of which were
too ambiguous for cygwin (or gcc 3.4.4).
dev/pcidev.cc:
Disambiguate arg for overloaded byte swap operation
(and fix it to be the correct one).
--HG--
extra : convert_revision : be37c6315aacbec6332b1d09e726b39b4aa18dce
new freebsd code.
dev/ns_gige.cc:
g++ doesn't like it when you declare a variable inside a case
label. Pull the declaration outside.
--HG--
extra : convert_revision : d39e84fc58f2dd5b09c5948eedb4b1d7848e9817
SConscript:
Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc.
arch/alpha/isa_traits.hh:
Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks().
cpu/exec_context.hh:
cpu/o3/alpha_cpu.hh:
Replaced htoa()s with gtoh() and htog().
cpu/o3/fetch_impl.hh:
cpu/simple/cpu.cc:
Replaced htoa() with gtoh().
dev/disk_image.cc:
Replaced htoa()s with letoh()s.
dev/ide_ctrl.cc:
Got rid of magic numbers.
Added IdeChannel and IdeRegType type names where necessary.
dev/ide_ctrl.hh:
Got rid of unnecessary macros.
Changed RegType_t to IdeRegType.
Changed bmi_regs to allow accessing registers by name instead of just by array index.
Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel.
dev/ide_disk.cc:
Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array.
dev/ide_disk.hh:
Updated command register struct.
dev/ns_gige.cc:
dev/ns_gige.hh:
Made ReadConfig and WriteConfig begin with a lower-case letter.
writeConfig() now takes a pointer to data as a parameter instead of a copy of data.
dev/pciconfigall.cc:
writeConfig() now takes a pointer to data as a parameter instead of a copy of data.
dev/pcidev.cc:
Cleaned up readConfig() and writeConfig() functions.
dev/pcidev.hh:
Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data.
dev/pcireg.h:
Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used.
dev/rtcreg.h:
Added macros for bit fields in RTC status registers A & B.
dev/sinic.cc:
Function name change: WriteConfig --> writeConfig.
writeConfig() now takes a pointer to data instead of a copy of data.
The accessing of elements of PCIConfig structure is updated.
dev/sinic.hh:
Function name change: WriteConfig --> writeConfig.
writeConfig() now takes a pointer to data instead of a copy of data.
dev/tsunami_io.cc:
Added implementation of new RTC and PIT classes.
dev/tsunami_io.hh:
Added classes for RTC and PIT modules.
dev/tsunamireg.h:
Added macros for DMA ports used by Tsunami-Tru64.
dev/uart8250.cc:
Got rid of a magic number.
Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register.
dev/uart8250.hh:
Added comments and macros dealing with the UART Interrupt ID register.
kern/linux/linux_system.cc:
Replaced htoa() with htog().
python/m5/objects/Pci.py:
PciFake is a python class for Pci Devices that do nothing.
python/m5/objects/Tsunami.py:
TsunamiFake was renamed as IsaFake.
sim/system.cc:
Replaced htoa()s with htog()s.
dev/isa_fake.cc:
New BitKeeper file ``dev/isa_fake.cc''
TsunamiFake was renamed as IsaFake.
dev/isa_fake.hh:
New BitKeeper file ``dev/isa_fake.hh''
TsunmaiFake was renamed as IsaFake.
dev/pitreg.h:
New BitKeeper file ``dev/pitreg.h''
Useful macros for working with PIT (Periodic Interval Timer) registers.
--HG--
extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
dev/pciconfigall.cc:
removed union.
dev/pcidev.cc:
.
dev/rtcreg.h:
more macros to avoid magic numbers.
dev/tsunami_io.cc:
replaced magic numbers, no more advancing RTC as it isn't reaaly necessary.
dev/tsunami_io.hh:
removed declarations of things that go unused.
dev/uart8250.cc:
reading the Interrupt ID register should clear TX interrupt flag.
dev/uart8250.hh:
useful #defines.
kern/freebsd/freebsd_system.cc:
kern/freebsd/freebsd_system.hh:
nothing.
python/m5/objects/Pci.py:
new PciFake.
--HG--
extra : convert_revision : 88259704f5b215591d1416360180810fcda14d26
SConscript:
Include pcifake.cc, fix spacing.
dev/ide_ctrl.cc:
Consolidate switch-case blocks.
dev/ide_disk.cc:
Add comments.
dev/pciconfigall.cc:
Adjust spacing.
dev/pcidev.cc:
Adjust spacing, rearrange code.
dev/tsunami_io.cc:
Rearrange code.
dev/uart8250.cc:
Switch uart interrupt interval back to original value.
python/m5/objects/Pci.py:
Add PciFake class to be used as a PCI-ISA bridge device.
--HG--
extra : convert_revision : 8aea94318510079a310377f297aa161ba5f7864c
dev/ide_ctrl.cc:
dev/ide_disk.cc:
dev/pcidev.cc:
Made endian-independent.
dev/ide_disk.hh:
fixed.
dev/pciconfigall.cc:
The data to write is contained in a 32-bit unsigned int now. The union method would not have worked on big-endian machines.
dev/pcidev.hh:
Fixed typo.
dev/tsunami_io.cc:
Return zero on RTC alarm reads.
dev/uart8250.cc:
Fix uart interrupt handling.
--HG--
extra : convert_revision : b5c08e8e77644c399c20888666406805ff1b6649
dev/ide_disk.cc:
Fix formatting. Panic if unexpected register type is given.
python/m5/objects/Tsunami.py:
Add default size of TsunamiFake device.
--HG--
extra : convert_revision : 03a35a2f6468b95746cba41ce7e93afeeb70ccef
