Commit graph

476 commits

Author SHA1 Message Date
Steve Reinhardt
9979355539 util: delete old unused style-checking scripts
The functions in these scripts were apparently folded into style.py but the
old scripts were orphaned without being deleted.  Get rid of them so their
existence is no longer confusing.
2016-02-06 17:21:18 -08:00
Tony Gutierrez
1a7d3f9fcb gpu-compute: AMD's baseline GPU model 2016-01-19 14:28:22 -05:00
Gabor Dozsa
64ca31976f config: Updates for distributed gem5 simulations 2016-01-07 16:33:47 -06:00
Gabor Dozsa
5dec4e07b8 dev: Distributed Ethernet link for distributed gem5 simulations
Distributed gem5 (abbreviated dist-gem5) is the result of the
convergence effort between multi-gem5 and pd-gem5 (from Univ. of
Wisconsin). It relies on the base multi-gem5 infrastructure for packet
forwarding, synchronisation and checkpointing but combines those with
the elaborated network switch model from pd-gem5.

--HG--
rename : src/dev/net/multi_etherlink.cc => src/dev/net/dist_etherlink.cc
rename : src/dev/net/multi_etherlink.hh => src/dev/net/dist_etherlink.hh
rename : src/dev/net/multi_iface.cc => src/dev/net/dist_iface.cc
rename : src/dev/net/multi_iface.hh => src/dev/net/dist_iface.hh
rename : src/dev/net/multi_packet.hh => src/dev/net/dist_packet.hh
2016-01-07 16:33:47 -06:00
Gabor Dozsa
e677494260 pseudo inst,util: Add optional key to initparam pseudo instruction
The key parameter can be used to read out various config parameters from
within the simulated software.
2016-01-07 16:33:47 -06:00
Karthik Sangaiah
6fa936b021 dev, arm: Add gem5 extensions to support more than 8 cores
Previous ARM-based simulations were limited to 8 cores due to
limitations in GICv2 and earlier. This changeset adds a set of
gem5-specific extensions that enable support for up to 256 cores.

When the gem5 extensions are enabled, the GIC uses CPU IDs instead of
a CPU bitmask in the GIC's register interface. To OS can enable the
extensions by setting bit 0x200 in ICDICTR.

This changeset is based on previous work by Matt Evans.
2015-09-18 16:49:28 +01:00
Radhika Jagtap
54519fd51f cpu: Support virtual addr in elastic traces
This patch adds support to optionally capture the virtual address and asid
for load/store instructions in the elastic traces. If they are present in
the traces, Trace CPU will set those fields of the request during replay.
2015-12-07 16:42:16 -06:00
Radhika Jagtap
3080bbcc36 cpu: Create record type enum for elastic traces
This patch replaces the booleans that specified the elastic trace record
type with an enum type. The source of change is the proto message for
elastic trace where the enum is introduced. The struct definitions in the
elastic trace probe listener as well as the Trace CPU replace the boleans
with the proto message enum.

The patch does not impact functionality, but traces are not compatible with
previous version. This is preparation for adding new types of records in
subsequent patches.
2015-12-07 16:42:16 -06:00
Radhika Jagtap
8f1ca0a212 util: Add decode and encode scripts for elastic traces
This patch adds python scripts to parse a protobuf encoded O3CPU
elastic trace and convert it to a text file output and vice versa.
2015-12-07 16:42:15 -06:00
Bjoern A. Zeeb
e746231682 util: term: drop CC from Makefile
With clang there are systems without gcc being installed anymore and we should
not rely on that.  This patch drops CC so that system's default compiler is
invoked.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-12-04 17:25:45 -06:00
Abdul Mutaal Ahmad
0707f4ee63 util: DrainManager/Checkpoint changes in SystemC coupling
Due to changes in Drain Manager, the lastest systemc coupling doesn't work. The
code for handling Checkpoint has been modified and it is now compatiable with
new drain manager.

Testing is being done on systemC coupling. It needs more testing to verify
checkpointing feature.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-12-04 17:20:07 -06:00
Andrew Bardsley
4596a33e10 sim: Update C++ config example to match SystemC example
Update the use of the drain manager, and checkpointing to
match changes to gem5 since the example was written.
2015-09-10 16:10:49 +01:00
Andreas Hansson
6adb728fb4 config: Minor fixes to the DRAM utilisation sweep 2015-11-22 05:10:17 -05:00
Curtis Dunham
02881a7bf3 base: remove Trace::enabled flag
The DTRACE() macro tests both Trace::enabled and the specific flag. This
change uses the same administrative interface for enabling/disabling
tracing, but masks the SimpleFlags settings directly. This eliminates a
load for every DTRACE() test, e.g. DPRINTF.
2015-09-30 15:21:55 -05:00
Mitch Hayenga
a5c4eb3de9 isa,cpu: Add support for FS SMT Interrupts
Adds per-thread interrupt controllers and thread/context logic
so that interrupts properly get routed in SMT systems.
2015-09-30 11:14:19 -05:00
Andreas Hansson
40fcb59c54 util: Fix minor issues in DRAM sweep scripts
This patch fixes a few issues in the sweep scripts, bringing them
up-to-date with the latest memory configs and options.
2015-09-25 06:45:50 -04:00
Abdul Mutaal Ahmad
8dfa45e03c misc: Bugfix for Freezing Terminal in SystemC Simulation
If the terminal was used in the SystemC or TLM simulations the simulation gets
in a deadlock state. This is because of the Event queue gets locked while
servicing the async events leading to event queue deadlock. This was solved by
locking the queue at the beginning of service of async events.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-09-15 08:14:07 -05:00
Abdul Mutaal Ahmad
1bb6a100ab misc: Bugfix in TLM integration regarding CleanEvict Command
The CleanEvict command was not considered in /util/tlm/sc_port.cc this could
lead to a simulator crash. This issue is solved by ignoring this special
command type.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-09-15 08:14:07 -05:00
Andreas Sandberg
f7055e9215 dev, arm: Rewrite the HDLCD controller
Rewrite the HDLCD controller to use the new DMA engine and pixel
pump. This fixes several bugs in the current implementation:

   * Broken/missing interrupt support (VSync, underrun, DMA end)
   * Fragile resolution changes (changing resolutions used
     to cause assertion errors).
   * Support for resolutions with a width that isn't divisible by 32.
   * The pixel clock can now be set dynamically.

This breaks checkpoint compatibility. Checkpoints can be upgraded with
the checkpoint conversion script. However, upgraded checkpoints won't
contain the state of the current frame. That means that HDLCD
controllers restoring from a converted checkpoint immediately start
drawing a new frame (i.e, expect timing differences).
2015-09-11 15:55:46 +01:00
Curtis Dunham
87b9da2df4 sim: tag-based checkpoint versioning
This commit addresses gem5 checkpoints' linear versioning bottleneck.
Since development is distributed across many private trees, there exists
a sort of 'race' for checkpoint version numbers: internally a checkpoint
version may be used but then resynchronizing with the external tree causes
a conflict on that version.  This change replaces the linear version number
with a set of unique strings called tags.  Now the only conflicts that can
arise are of tag names, where collisions are much easier to avoid.

The checkpoint upgrader (util/cpt_upgrader.py) upgrades the version
representation, as one would expect. Each tag version implements its
upgrader code in a python file in the util/cpt_upgraders directory
rather than adding a function to the upgrader script itself.

The version tags are stored in the 'Globals' section rather than 'root'
(as the version was previously) because 'Globals' gets unserialized
first and can provide a warning before any other unserialization errors
can occur.
2015-09-02 15:23:30 -05:00
Andreas Hansson
d540ba0325 util: Enable DRAM sweep to print power and efficiency
This patch enhances the functionality of the DRAM sweep script to not
only plot the bandwidth utilisation, but also total power and power
efficiency. To do so, a command-line switch is added, and a bit more
data extracted from the stats.
2015-08-05 04:36:31 -04:00
Matthias Jung
8723b08dbf misc: Coupling gem5 with SystemC TLM2.0
Transaction Level Modeling (TLM2.0) is widely used in industry for creating
virtual platforms (IEEE 1666 SystemC). This patch contains a standard compliant
implementation of an external gem5 port, that enables the usage of gem5 as a
TLM initiator component in SystemC based virtual platforms. Both TLM coding
paradigms loosely timed (b_transport) and aproximately timed (nb_transport) are
supported.

Compared to the original patch a TLM memory manager was added. Furthermore, the
transaction object was removed and for each TLM payload a PacketPointer that
points to the original gem5 packet is added as an TLM extension.  For event
handling single events are now created.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-08-03 23:08:40 -05:00
Brad Beckmann
9560893f0d util: added .cl OpenCL extension to file_type.py 2015-07-20 09:15:18 -05:00
Brad Beckmann
d87fe7b3f4 util: added .mk makefile extension to file_types.py 2015-07-20 09:15:18 -05:00
Anthony Gutierrez
a72c75dcea util: add a vimrc that matches gem5 style guide 2015-07-31 22:53:17 -04:00
Brandon Potter
b90711ea53 base: refactor process class (specifically FdMap and friends)
This patch extends the previous patch's alterations around fd_map.  It cleans
up some of the uglier code in the process file and replaces it with a more
concise C++11 version.  As part of the changes, the FdMap class is pulled out
of the Process class and receives its own file.
2015-07-24 12:25:22 -07:00
Gabor Dozsa
fc5bf6713f dev: add support for multi gem5 runs
Multi gem5 is an extension to gem5 to enable parallel simulation of a
distributed system (e.g. simulation of a pool of machines
connected by Ethernet links). A multi gem5 run consists of seperate gem5
processes running in parallel (potentially on different hosts/slots on
a cluster). Each gem5 process executes the simulation of a component of the
simulated distributed system (e.g. a multi-core board with an Ethernet NIC).

The patch implements the "distributed" Ethernet link device
(dev/src/multi_etherlink.[hh.cc]). This device will send/receive
(simulated) Ethernet packets to/from peer gem5 processes. The interface
to talk to the peer gem5 processes is defined in dev/src/multi_iface.hh and
in tcp_iface.hh.

There is also a central message server process (util/multi/tcp_server.[hh,cc])
which acts like an Ethernet switch and transfers messages among the gem5 peers.

A multi gem5 simulations can be kicked off by the util/multi/gem5-multi.sh
wrapper script.

Checkpoints are supported by multi-gem5. The checkpoint must be
initiated by a single gem5 process. E.g., the gem5 process with rank 0
can take a checkpoint from the bootscript just before it invokes
'mpirun' to launch an MPI test. The message server process will notify
all the other peer gem5 processes and make them take a checkpoint, too
(after completing a global synchronisation to ensure that there are no
inflight messages among gem5).
2015-07-15 19:53:50 -05:00
Andreas Hansson
d9f8f07613 util: Remove DRAMPower trace script
This script is deprecated and DRAMPower is now properly integrated
with the controller model.
2015-07-03 10:14:24 -04:00
Curtis Dunham
31825bd988 sim, arm: add checkpoint upgrader for d02b45a5
The insertion of CONTEXTIDR_EL2 in the ARM miscellaneous registers
obsoletes old checkpoints.
2015-06-01 18:05:11 -05:00
Andreas Hansson
ecd4bad351 config: Add soak test for memtest.py
This patch adds a random option to memtest.py which allows the user to
easily test valid random tree topologies. The patch also adds a
wrapper script to run soak tests using the newly introduced option.

We also adjust the progress interval and progress limit check to make
the output less noisy, and avoid false positives.

Bring on the pain.
2015-03-19 04:06:18 -04:00
Ali Saidi
4eff4fa12e cpu: add support for outputing a protobuf formatted CPU trace
Doesn't support x86 due to static instruction representation.

--HG--
rename : src/cpu/CPUTracers.py => src/cpu/InstPBTrace.py
2015-02-16 03:32:38 -05:00
Andreas Sandberg
5a573762d0 style: Fix broken m5format command
The m5format command didn't actually work due to parameter handling
issues and missing language detection. This changeset fixes those
issues and cleans up some of the code to shared between the style
checker and the format checker.
2015-02-11 10:23:34 -05:00
Andreas Sandberg
267443fa22 style: Fix incorrect style checker option name
The style used to support the option -w to automatically fix white
space issues. However, this option was actually wired up to fix all
styles issues the checker encountered. This changeset cleans up the
code that handles automatic fixing and adds an option to fix all
issues, and separate options for white spaces and include ordering.
2015-02-11 10:23:33 -05:00
Andreas Sandberg
9aad5b4569 style: Update the style checker to handle new include order
As of August 2014, the gem5 style guide mandates that a source file's
primary header is included first in that source file. This helps to
ensure that the header file does not depend on include file ordering
and avoids surprises down the road when someone tries to reuse code.

In the new order, include files are grouped into the following blocks:
  * Primary header file (e.g., foo.hh for foo.cc)
  * Python headers
  * C system/stdlib includes
  * C++ stdlib includes
  * Include files in the gem5 source tree

Just like before, include files within a block are required to be
sorted in alphabetical order.

This changeset updates the style checker to enforce the new order.
2015-02-03 14:25:50 -05:00
Andrew Bardsley
e5e5b80690 config: Fix to SystemC example's event handling
This patch fixes checkpoint restore in the SystemC hosting example by handling
early PollEvent events correctly before any EventQueue events are posted.

The SystemC event queue handler (SCEventQueue) reports an error if the event
loop is entered with no Events posted.  It is possible for this to happen
after instantiate due to PollEvent events.  This patch separates out
`external' events into a different handler in sc_module.cc to prevent the
error from occurring.

This fix also improves the event handling of asynchronous events by:

    1) Making asynchronous events 'catch up' gem5 time to SystemC
        time to avoid the appearance that events have been lost
        while servicing an asynchronous event that schedules an
        event loop exit event

    2) Add an in_simulate data member to Module to allow the event
        loop to check whether events should be processed or deferred
        until the next time Module::simulate is entered

    3) Cancel pending events around the entry/exit of the event loop
        in Module::simulate

    4) Moving the state initialisation of the example entirely into
        run to correct a problem with early events in checkpoint
        restore.

It is still possible to schedule asynchronous events (and talk PollQueue
actions) while simulate is not running.  This behaviour may stil cause
some problems.
2014-12-02 06:08:09 -05:00
Andrew Bardsley
05bba75cdc config: SystemC Gem5Control top level additions
This patch cleans up a few style issues and adds a few capabilities to the
SystemC top level 'Gem5Control/Gem5System' mechanism.  These include:

    1) A space to store/retrieve a version string for a model
    2) A mechanism for registering functions to be called at the end of
        elaboration to perform simulation setup tasks in SystemC
    3) Adding setGDBRemotePort to the Gem5Control
    4) Changing the sc_set_time_resolution behaviour to instead check that
        the SystemC time resolution is already acceptable
2014-12-02 06:08:06 -05:00
Alexandru Dutu
adbaa4dfde kvm, x86: Adding support for SE mode execution
This patch adds methods in KvmCPU model to handle KVM exits caused by syscall
instructions and page faults. These types of exits will be encountered if
KvmCPU is run in SE mode.
2014-11-23 18:01:08 -08:00
Andrew Bardsley
27b7b9e561 config: Fix checkpoint restore in C++ config example
This patch fixes the checkpoint restore option in the example of C++
configuration (util/cxx_config).

The fix introduces a call to config_manager->startup() (which calls startup
on all SimObjects managed by that manager) to replicate the loop of
SimObject::startup calls in src/python/m5/simulate.py::simulate guarded by
need_startup.  As util/cxx_config/main.cc is a C++ analogue of
src/python/mt/simulate.py, it should make a similar set of calls.
2014-11-14 03:54:02 -05:00
Andrew Bardsley
83f7e7afaf sim: SystemC hosting
This patch hosts gem5 onto SystemC scheduler. There's already an upstream
review board patch that does something similar but this patch ...:

 1) is less obtrusive to the existing gem5 code organisation. It's divided
 into the 'generic' preparatory patches (already submitted) and this patch
 which affects no existing files

 2) does not try to exactly track the gem5 event queue with notifys into
 SystemC and so doesn't requive the event queue to be modified for
 anything other than 'out of event queue' scheduling events

 3) supports debug logging with SC_REPORT

The patch consists of the files:
    util/systemc/
        sc_gem5_control.{cc,hh} -- top level objects to use to
                                   instantiate gem5 Systems within
                                   larger SystemC test harnesses as
                                   sc_module objects
        sc_logger.{cc,hh}       -- logging support
        sc_module.{cc,hh}       -- a separated event loop specific to
                                   SystemC
        stats.{cc,hh}           -- example Stats handling for the sample
                                   top level
        main.{cc,hh}            -- a sample top level

On the downside this patch is only currently functional with C++
configuration at the top level.

The above sc_... files are indended to be compiled alongside gem5 (as a
library, see main.cc for a command line and util/systemc/README for
more details.)

The top-level system instantiation in sc_gem5_control.{cc,hh} provides
two classes: Gem5Control and Gem5System

Gem5Control is a simulation control class (from which a singleton
object should be created) derived from Gem5SystemC::Module which
carries the top level simulation control interface for gem5.  This
includes hosting a system-building configuration file and
instantiating the Root object from that file.

Gem5System is a base class for instantiating renamed gem5 Systems
from the config file hosted by the Gem5Control object.  In use, a
SystemC module class should be made which represents the desired,
instantiable gem5 System.  That class's instances should create
a Gem5System during their construction, set the parameters of that
system and then call instantiate to build that system.  If this
is all carried out in the sc_core::sc_module-derived classes
constructor, the System's external ports will become children of
that module and can then be recovered by name using sc_core::
sc_find_object.

It is intended that this interface is used with dlopen.  To that
end, the header file sc_gem5_control.hh includes no other header
files from gem5 (and so can be easily copied into another project).
The classes Gem5System and Gem5Control have all their member
functions declared `virtual' so that those functions can be called
through the vtable acquired by building the top level Gem5Control
using dlsym(..., "makeGem5Control") and `makeSystem' on the
Gem5Control.
2014-10-16 05:49:54 -04:00
Andreas Hansson
66df7b7fd4 config: Add the ability to read a config file using C++ and Python
This patch adds the ability to load in config.ini files generated from
gem5 into another instance of gem5 built without Python configuration
support. The intended use case is for configuring gem5 when it is a
library embedded in another simulation system.

A parallel config file reader is also provided purely in Python to
demonstrate the approach taken and to provided similar functionality
for as-yet-unknown use models. The Python configuration file reader
can read both .ini and .json files.

C++ configuration file reading:

A command line option has been added for scons to enable C++ configuration
file reading: --with-cxx-config

There is an example in util/cxx_config that shows C++ configuration in action.
util/cxx_config/README explains how to build the example.

Configuration is achieved by the object CxxConfigManager. It handles
reading object descriptions from a CxxConfigFileBase object which
wraps a config file reader. The wrapper class CxxIniFile is provided
which wraps an IniFile for reading .ini files. Reading .json files
from C++ would be possible with a similar wrapper and a JSON parser.

After reading object descriptions, CxxConfigManager creates
SimObjectParam-derived objects from the classes in the (generated with this
patch) directory build/ARCH/cxx_config

CxxConfigManager can then build SimObjects from those SimObjectParams (in an
order dictated by the SimObject-value parameters on other objects) and bind
ports of the produced SimObjects.

A minimal set of instantiate-replacing member functions are provided by
CxxConfigManager and few of the member functions of SimObject (such as drain)
are extended onto CxxConfigManager.

Python configuration file reading (configs/example/read_config.py):

A Python version of the reader is also supplied with a similar interface to
CxxConfigFileBase (In Python: ConfigFile) to config file readers.

The Python config file reading will handle both .ini and .json files.

The object construction strategy is slightly different in Python from the C++
reader as you need to avoid objects prematurely becoming the children of other
objects when setting parameters.

Port binding also needs to be strictly in the same port-index order as the
original instantiation.
2014-10-16 05:49:37 -04:00
Nilay Vaish
19ca35737d util: adds a script for using DSENT
This patch adds a python script that processes the configuration and the
statistics file from a simulation run.  Configuration and activity of network
routers and links obtained from this processing is fed to DSENT via its Python
interface.  DSENT then computes the area and the power consumption of these
network components.  The script outputs these quantities to the console.
2014-10-11 16:16:00 -05:00
Dam Sunwoo
291b1f8c1f config: Update Streamline scripts and configs
Updated the stat_config.ini files to reflect new structure.

Moved to a more generic stat naming scheme that can easily handle
multiple CPUs and L2s by letting the script replace pre-defined #
symbols to CPU or L2 ids.

Removed the previous per_switch_cpus sections. Still can be used by
spelling out the stat names if necessary. (Resuming from checkpoints
no longer use switch_cpus. Only fast-forwarding does.)
2014-09-03 07:43:02 -04:00
Curtis Dunham
4a3f11149d arm: use condition code registers for ARM ISA
Analogous to ee049bf (for x86).  Requires a bump of the checkpoint version
and corresponding upgrader code to move the condition code register values
to the new register file.
2014-04-29 16:05:02 -05:00
Andreas Hansson
0756406739 mem: Add utility script to plot DRAM efficiency sweep
This patch adds basic functionality to quickly visualise the output
from the DRAM efficiency script. There are some unfortunate hacks
needed to communicate the needed information from one script to the
other, and we fall back on (ab)using the simout to do this.

As part of this patch we also trim the efficiency sweep to stop at 512
bytes as this should be sufficient for all forseeable DRAMs.
2014-09-03 07:42:29 -04:00
Andreas Sandberg
2e17d83629 style: Add support for a style ignore list and ignore ext/
There are some directories within the repository where we don't want
to enforce our coding style. Specifically, we don't want the style
hooks to warn whenever we update external code in the ext/ directory.
2014-08-26 10:14:30 -04:00
Andreas Sandberg
35bc5210d3 style: Fixup strange semantics in hg m5style
The 'hg m5style' command had some rather strange semantics. When
called without arguments, it applied the style checker to all added
files and modified regions of modified files. However, when providing
a list of files, it used that list as an ignore list instead of
specifically checking those files.

This patch makes the m5style command behave more like other Mercurial
commands where the arguments are used to specify which files to work
on instead of which files to ignore.
2014-08-26 10:14:07 -04:00
Curtis Dunham
04d1f61ae8 sim: bump checkpoint version for multiple event queues
This patch adds a fix for older checkpoints before support for
multiple event queues were added in changeset 2cce74fe359e. The change
in checkpoint version should really hav ebeen part of the
aforementioned changeset.
2014-02-05 16:17:41 -06:00
Andreas Sandberg
43f1e41c02 util: Fix state leakage in the SortIncludes style verifier
There are cases where the state of a SortIncludes object gets messed
up and leaks between invocations/files. This typically happens when a
file ends with an include block (dump_block() gets called at the end
of __call__). In this case, the state of the class is not reset
between files. This bug manifests itself as ghost includes that leak
between files when applying the style hooks.

This changeset adds a reset at the beginning of the __call__ method
which ensures that the class is always in a clean state when
processing a new file.
2014-08-13 06:57:25 -04:00
Radhika Jagtap
2ee47fc8d1 util: Move packet trace file read to protolib
This patch moves the code for opening an input protobuf packet trace into
a function defined in the protobuf library. This is because the code is
commonly used in decode scripts and is independent of the src protobuf
message.
2014-08-10 05:39:20 -04:00
Andrew Bardsley
0e8a90f06b cpu: `Minor' in-order CPU model
This patch contains a new CPU model named `Minor'. Minor models a four
stage in-order execution pipeline (fetch lines, decompose into
macroops, decompose macroops into microops, execute).

The model was developed to support the ARM ISA but should be fixable
to support all the remaining gem5 ISAs. It currently also works for
Alpha, and regressions are included for ARM and Alpha (including Linux
boot).

Documentation for the model can be found in src/doc/inside-minor.doxygen and
its internal operations can be visualised using the Minorview tool
utils/minorview.py.

Minor was designed to be fairly simple and not to engage in a lot of
instruction annotation. As such, it currently has very few gathered
stats and may lack other gem5 features.

Minor is faster than the o3 model. Sample results:

     Benchmark     |   Stat host_seconds (s)
    ---------------+--------v--------v--------
     (on ARM, opt) | simple | o3     | minor
                   | timing | timing | timing
    ---------------+--------+--------+--------
    10.linux-boot  |   169  |  1883  |  1075
    10.mcf         |   117  |   967  |   491
    20.parser      |   668  |  6315  |  3146
    30.eon         |   542  |  3413  |  2414
    40.perlbmk     |  2339  | 20905  | 11532
    50.vortex      |   122  |  1094  |   588
    60.bzip2       |  2045  | 18061  |  9662
    70.twolf       |   207  |  2736  |  1036
2014-07-23 16:09:04 -05:00
Radhika Jagtap
b998a0c6ac util: Add DVFS perfLevel to checkpoint upgrade script
This patch updates the checkpoint upgrader script. It adds the _perfLevel
variable in the clock domain and voltage domain simObjects used for DVFS.
2014-07-01 11:58:22 -04:00
Andreas Hansson
641e602830 mem: DRAMPower trace formatting script
This patch adds a first version of a script that processes the debug
output and generates a command trace for DRAMPower. This is work in
progress and is intended as a snapshot of ongoing work at this point.

The longer term plan is to link in DRAMPower as a library and have one
instance of the model per rank, and instantiate it based on a struct
passed from gem5. Each command will then be a call to the model and no
parsing of traces will be necessary.
2014-06-30 13:56:04 -04:00
Joel Hestness
4a98b0cd59 Util: Do not style check symlinks
The style checker used to traverse symlinks if they pointed to files, which can
result in style checker failure if the pointed-to file doesn't exist. This
style check is actually unnecessary, since symlinks either point to other files
that are already style checked, or files outside gem5, which shouldn't be
checked. Skip symlinks.
2014-06-09 22:01:18 -05:00
Eric Van Hensbergen
636afeaa77 arm: Add Makefile for aarch64 build of util/m5 2014-05-09 18:58:46 -04:00
Mitch Hayenga
564cc801c6 util: Valgrind suppression addition
Adds a suppression rule to util/valgrind-suppressions due to a minor bug
present in zlib that has no impact on simulation.
2014-04-23 05:18:29 -04:00
Marco Elver
d9fa950396 ruby: recorder: Fix (de-)serializing with different cache block-sizes
Upon aggregating records, serialize system's cache-block size, as the
cache-block size can be different when restoring from a checkpoint. This way,
we can correctly read all records when restoring from a checkpoints, even if
the cache-block size is different.

Note, that it is only possible to restore from a checkpoint if the
desired cache-block size is smaller or equal to the cache-block size
when the checkpoint was taken; we can split one larger request into
multiple small ones, but it is not reliable to do the opposite.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-04-19 09:00:30 -05:00
Anthony Gutierrez
8d665ee166 arm: fix typos in makefile for ARM m5 util and link statically
1) fixes a typo for clean target libgemOpJni.so -> libgem5OpJni.so
2) addes jni_gem5Op.h to clean since it is added during make
3) links the m5 utility statically since it won't work on some images otherwise
2014-04-01 12:35:31 -04:00
Andreas Hansson
4dbffeb987 util: Add support for detection of gzipped packet traces
This patch adds support for automatically detecting a gzipped packet
trace, thus accepting either a compressed or uncompressed trace.
2014-03-23 11:11:46 -04:00
Radhika Jagtap
c446dc40bd mem: Edit proto Packet and enhance the python script
This patch changes the decode script to output the optional fields of
the proto message Packet, namely id and flags. The flags field is set
by the communication monitor.

The id field is useful for CPU trace experiments, e.g. linking the
fetch side to decode side. It had to be renamed because it clashes
with a built in python function id() for getting the "identity" of an
object.

This patch also takes a few common function definitions out from the
multiple scripts and adds them to a protolib python module.
2014-03-07 15:56:23 -05:00
Andreas Hansson
e83fdc532b util: Enhance the error messages for packet encode/decode
This patch adds a more verbose error message when the Python protobuf
module cannot be loaded.
2014-02-18 05:50:52 -05:00
ARM gem5 Developers
612f8f074f arm: Add support for ARMv8 (AArch64 & AArch32)
Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli    (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt       (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole           (AArch64 NEON, validation)
Ali Saidi            (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang         (AArch64 Linux support)
Rene De Jong         (AArch64 Linux support, performance opt.)
Matt Horsnell        (AArch64 MP, validation)
Matt Evans           (device models, code integration, validation)
Chris Adeniyi-Jones  (AArch64 syscall-emulation)
Prakash Ramrakhyani  (validation)
Dam Sunwoo           (validation)
Chander Sudanthi     (validation)
Stephan Diestelhorst (validation)
Andreas Hansson      (code integration, performance opt.)
Eric Van Hensbergen  (performance opt.)
Gabe Black
2014-01-24 15:29:34 -06:00
Dam Sunwoo
6019d73db4 util: updated Streamline flow to support ARM DS-5 v5.17 protocol
The previous flow supported ARM DS-5 v5.13 protocol.
2014-01-24 15:29:29 -06:00
Nilay Vaish
bb6d7d402b ruby: rename MESI_CMP_directory to MESI_Two_Level
This is because the next patch introduces a three level hierarchy.

--HG--
rename : build_opts/ALPHA_MESI_CMP_directory => build_opts/ALPHA_MESI_Two_Level
rename : build_opts/X86_MESI_CMP_directory => build_opts/X86_MESI_Two_Level
rename : configs/ruby/MESI_CMP_directory.py => configs/ruby/MESI_Two_Level.py
rename : src/mem/protocol/MESI_CMP_directory-L1cache.sm => src/mem/protocol/MESI_Two_Level-L1cache.sm
rename : src/mem/protocol/MESI_CMP_directory-L2cache.sm => src/mem/protocol/MESI_Two_Level-L2cache.sm
rename : src/mem/protocol/MESI_CMP_directory-dir.sm => src/mem/protocol/MESI_Two_Level-dir.sm
rename : src/mem/protocol/MESI_CMP_directory-dma.sm => src/mem/protocol/MESI_Two_Level-dma.sm
rename : src/mem/protocol/MESI_CMP_directory-msg.sm => src/mem/protocol/MESI_Two_Level-msg.sm
rename : src/mem/protocol/MESI_CMP_directory.slicc => src/mem/protocol/MESI_Two_Level.slicc
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/config.ini => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/config.ini
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/ruby.stats
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simerr => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/simerr
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simout => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/simout
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/stats.txt
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/system.pc.com_1.terminal => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/system.pc.com_1.terminal
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/config.ini => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/simerr => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/simout => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/simout
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/stats.txt
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/config.ini => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/simerr => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/simout => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/simout
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/stats.txt
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/config.ini => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/simerr => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/simout => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/simout
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/stats.txt
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/config.ini => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/simerr => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/simout => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/simout
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/stats.txt
2014-01-04 00:03:33 -06:00
Nilay Vaish
59a041c5e7 util: update checkpoint aggregation script
The checkpoint aggregation script had become outdated due to numerous changes
to checkpoints over the past couple of years.  This updates the script.  It
now supports aggregation for x86 architecture instead of alpha.  Also a couple
of new options have been added that specify the size of the memory file to be
created and whether or not the memory file should be compressed.
2013-12-03 10:36:03 -06:00
Chander Sudanthi
3e6da89419 ARM: add support for TEEHBR access
Thumb2 ARM kernels may access the TEEHBR via thumbee_notifier
in arch/arm/kernel/thumbee.c.  The Linux kernel code just seems
to be saving and restoring the register.  This patch adds support
for the TEEHBR cp14 register.  Note, this may be a special case
when restoring from an image that was run on a system that
supports ThumbEE.
2013-10-31 13:41:13 -05:00
Geoffrey Blake
be4aa2b6ba dev: Fix race conditions in IDE device on newer kernels
Newer linux kernels and distros exercise more functionality in the IDE device
than previously, exposing 2 races. The first race is the handling of aborted
DMA commands would immediately report the device is ready back to the kernel
and cause already in flight commands to assert the simulator when they returned
and discovered an inconsitent device state.  The second race was due to the
Status register not being handled correctly, the interrupt status bit would get
stuck at 1 and the driver eventually views this as a bad state and logs the
condition to the terminal.  This patch fixes these two conditions by making the
device handle aborted commands gracefully and properly handles clearing the
interrupt status bit in the Status register.
2013-10-31 13:41:13 -05:00
Ali Saidi
68dee58c38 arm: fix m5ops binary for ARM and add m5fail.
Changes to make m5ops work under virtualization seemed to break them working
with non-virtualized systems and the recently added m5 fail command makes
the m5op binary not compile.  For now remove the code for virtualization.
2013-10-31 13:41:13 -05:00
Dam Sunwoo
1e2a455a23 util: Streamline .apc project convertsion script
This Python script generates an ARM DS-5 Streamline .apc project based
on gem5 run. To successfully convert, the gem5 runs needs to be run
with the context-switch-based stats dump option enabled (The guest
kernel also needs to be patched to allow gem5 interrogate its task
information.) See help for more information.
2013-10-17 10:20:45 -05:00
Andreas Sandberg
fec2dea5c3 x86: Add support for m5ops through a memory mapped interface
In order to support m5ops in virtualized environments, we need to use
a memory mapped interface. This changeset adds support for that by
reserving 0xFFFF0000-0xFFFFFFFF and mapping those to the generic IPR
interface for m5ops. The mapping is done in the
X86ISA::TLB::finalizePhysical() which means that it just works for all
of the CPU models, including virtualized ones.
2013-09-30 12:20:53 +02:00
Andreas Hansson
19a5b68db7 arch: Resurrect the NOISA build target and rename it NULL
This patch makes it possible to once again build gem5 without any
ISA. The main purpose is to enable work around the interconnect and
memory system without having to build any CPU models or device models.

The regress script is updated to include the NULL ISA target. Currently
no regressions make use of it, but all the testers could (and perhaps
should) transition to it.

--HG--
rename : build_opts/NOISA => build_opts/NULL
rename : src/arch/noisa/SConsopts => src/arch/null/SConsopts
rename : src/arch/noisa/cpu_dummy.hh => src/arch/null/cpu_dummy.hh
rename : src/cpu/intr_control.cc => src/cpu/intr_control_noisa.cc
2013-09-04 13:22:57 -04:00
Steve Reinhardt
ecfe7dc3ef util/regress: set --no-lto on regressions
See comment for motivation.
2013-08-21 17:31:08 -07:00
Anthony Gutierrez
cf56619b0c arm: use -march when compiling m5op_arm.S
Using arm-linux-gnueabi-gcc 4.7.3-1ubuntu1 on Ubuntu 13.04 to compiled
the m5 binary yields the error:

m5op_arm.S: Assembler messages:
m5op_arm.S:85: Error: selected processor does not support ARM mode `bxj lr'

For each of of the SIMPLE_OPs. Apparently, this compiler doesn't like the
interworking of these code types for the default arch. Adding -march=armv7-a
makes it compile. Another alternative that I found to work is replacing the
bxj lr instruction with mov pc, lr, but I don't know how that affects the
KVM stuff and if bxj is needed.
2013-08-14 10:51:47 -04:00
Nilay Vaish
e038741598 x86: add tlb checkpointing
This patch adds checkpointing support to x86 tlb. It upgrades the
cpt_upgrader.py script so that previously created checkpoints can
be updated. It moves the checkpoint version to 6.
2013-08-07 14:51:17 -05:00
Andreas Hansson
cc8911261e util: Auto generate the packet proto definitions
This patch simplifies the usage of the packet trace encoder/decoder by
attempting to automatically generating the packet proto definitions in
case they cannot be found.
2013-05-30 12:53:53 -04:00
Andreas Sandberg
1ae30c68c1 arm: Add support for the m5fail pseudo-op 2013-05-14 15:06:50 +02:00
Andreas Sandberg
e1cbe33c72 arm: Fix compilation error in m5 utility
Changeset 5ca6098b9560 accidentally broke the m5 utility. This
changeset adds the missing co-processor call used to trigger the
pseudo-op in ARM mode and fixes an alignment issue that caused some
pseudo-ops to leave thumb mode.
2013-05-14 15:03:45 +02:00
Andreas Sandberg
4153a76478 arm: Make libm5 a dependency of the m5 utility
The m5 utility wasn't relinked properly since libm5.a wasn't a
dependency of the utility. This changeset addresses that issue.
2013-05-07 14:47:04 +02:00
Andreas Sandberg
33ab8f735d kvm: Add support for pseudo-ops on ARM
This changeset adds support for m5 pseudo-ops when running in
kvm-mode. Unfortunately, we can't trap the normal gem5 co-processor
entry in KVM (it doesn't seem to be possible to trap accesses to
non-existing co-processors). We therefore use BZJ instructions to
cause a trap from virtualized mode into gem5. The BZJ instruction is
becomes a normal branch to the gem5 fallback code when running in
simulated mode, which means that this patch does not need to change
the ARM ISA-specific code.

Note: This requires a patched host kernel.
2013-04-22 13:20:32 -04:00
Andreas Hansson
2018f61c26 util: Add a utility script for decoding packet traces
This patch adds a simple Python script that reads the protobuf-encoded
packet traces (not gzipped), and prints them to an ASCII trace file.

The script can also be used as a template for other packet output
formats.
2013-03-26 14:49:58 -04:00
Andreas Hansson
7885a1646d util: Add a utility script for encoding packet traces
This patch adds a simple Python script that reads a simple ASCII trace
format and encodes it as protobuf output compatible with the traffic
generator.

The script can also be used as a template for other packet input
formats that should be converted to the gem5 packet protobuf format.
2013-03-26 14:49:55 -04:00
Andreas Sandberg
670fc52f18 x86: Revert [02321b16685f] which breaks m5ops on x86
Changeset 02321b16685f added m5_writefile to m5op_x86.S a second time,
which causes a compilation error on when compiling for x86. This
changeset reverts that changeset and fixes the error.
2013-03-25 13:20:15 +01:00
Matt Horsnell
e88e7d88b9 o3: fix tick used for renaming and issue with range selection
Fixes the tick used from rename:
- previously this gathered the tick on leaving rename which was always 1 less
  than the dispatch. This conflated the decode ticks when back pressure built
  in the pipeline.
- now picks up tick on entry.

Added --store_completions flag:
- will additionally display the store completion tail in the viewer.
- this highlights periods when large numbers of stores are outstanding (>16 LSQ
  blocking)

Allows selection by tick range (previously this caused an infinite loop)
2013-02-15 17:40:09 -05:00
Lluís Vilanova
25efbb5bdc util: add writefile to m5 util program for x86 2013-01-08 08:54:13 -05:00
Lluís Vilanova
807168a1de util: add m5_fail op.
Used as a command in full-system scripts helps the user ensure the benchmarks have finished successfully.

For example, one can use:

    /path/to/benchmark args || /sbin/m5 fail 1

and thus ensure gem5 will exit with an error if the benchmark fails.
2013-01-08 08:54:12 -05:00
Andreas Sandberg
35be32b7ea util: Fix stack corruption in the m5 util
The number of arguments specified when calling parse_int_args() in
do_exit() is incorrect. This leads to stack corruption since it causes
writes past the end of the ints array.
2013-01-07 16:56:37 -05:00
Andreas Sandberg
38925ff621 arm: Remove the register mapping hack used when copying TCs
In order to see all registers independent of the current CPU mode, the
ARM architecture model uses the magic MISCREG_CPSR_MODE register to
change the register mappings without actually updating the CPU
mode. This hack is no longer needed since the thread context now
provides a flat interface to the register file. This patch replaces
the CPSR_MODE hack with the flat register interface.
2013-01-07 13:05:44 -05:00
Andreas Sandberg
17b47d35e1 arch: Move the ISA object to a separate section
After making the ISA an independent SimObject, it is serialized
automatically by the Python world. Previously, this just resulted in
an empty ISA section. This patch moves the contents of the ISA to that
section and removes the explicit ISA serialization from the thread
contexts, which makes it behave like a normal SimObject during
serialization.

Note: This patch breaks checkpoint backwards compatibility! Use the
cpt_upgrader.py utility to upgrade old checkpoints to the new format.
2013-01-07 13:05:42 -05:00
Lluis Vilanova
bb4f6562ae x86, util: add m5_writefile to m5op_x86.S
Committed by: Nilay Vaish
2012-11-03 12:57:28 -05:00
James Clarkson
fdcfbda38d m5: Expose m5 pseudo-instructions to C/C++ via a static library
Updated the util/m5/Makefile.arm so that m5op_arm.S is used to create
a static library - libm5.a. Allowing users to insert m5
psuedo-instructions into their applications for fine-grained
checkpointing, switching cpus or dumping statistics. e.g.

#include <m5op.h>

void foo(){
	...
	m5_reset_stats(<delay>,<period>)
	m5_work_begin(<workid>,<threadid>);
	...
	m5_work_end(<workid>,<threadid>);
	m5_dump_stats(<delay>,<period>);
}
2012-10-09 12:58:25 +01:00
Dam Sunwoo
81406018b0 ARM: dump stats and process info on context switches
This patch enables dumping statistics and Linux process information on
context switch boundaries (__switch_to() calls) that are used for
Streamline integration (a graphical statistics viewer from ARM).
2012-11-02 11:32:01 -05:00
Andreas Hansson
9baa35ba80 Mem: Separate the host and guest views of memory backing store
This patch moves all the memory backing store operations from the
independent memory controllers to the global physical memory. The main
reason for this patch is to allow address striping in a future set of
patches, but at this point it already provides some useful
functionality in that it is now possible to change the number of
memory controllers and their address mapping in combination with
checkpointing. Thus, the host and guest view of the memory backing
store are now completely separate.

With this patch, the individual memory controllers are far simpler as
all responsibility for serializing/unserializing is moved to the
physical memory. Currently, the functionality is more or less moved
from AbstractMemory to PhysicalMemory without any major
changes. However, in a future patch the physical memory will also
resolve any ranges that are interleaved and properly assign the
backing store to the memory controllers, and keep the host memory as a
single contigous chunk per address range.

Functionality for future extensions which involve CPU virtualization
also enable the host to get pointers to the backing store.
2012-10-15 08:12:32 -04:00
Sascha Bischoff
29acf859eb Util: Added script to semantically diff two config.ini files
This script (util/diff_config.pl) takes two config.ini files and compares them.
It highlights value changes, as well as displaying which parts are unique to
a specific config.ini file. This is useful when trying to replicate an earlier
experiment and when trying to make small changes to an existing configuration.
2012-09-25 11:49:40 -05:00
Djordje Kovacevic
d060a28a29 CPU: Add abandoned instructions to O3 Pipe Viewer 2012-09-25 11:49:40 -05:00
Ali Saidi
98e1ce638f ARM: Fix the compiler and platform identification for building on ARM. 2012-09-07 14:20:53 -05:00
Ali Saidi
0ecb351c51 ARM: fix m5 op binary to properly convert 64bit operands 2012-09-07 14:20:53 -05:00
Djordje Kovacevic
124aac72b4 CPU: O3-PipeView.py doesn't display the end of timelines.
Insts' timeline that stretches over multiple lines doesn't always get printed.
2012-09-07 14:20:53 -05:00
Nathanael Premillieu
fe2faa1975 util: Fix issues with style checker. 2012-07-27 16:08:05 -04:00
Matt Evans
234fd1c4d8 Style: Make style.py's invalid warning print which file caused the infraction. 2012-06-29 11:19:06 -04:00
Ali Saidi
c06970b673 cpt: update some comments in the checkpoint migration script 2012-06-05 10:36:59 -04:00
Ali Saidi
70d7d6cc7f sim: Provide a framework for detecting out of data checkpoints and migrating them. 2012-06-05 01:23:10 -04:00