Using print >>ini_file syntax instead of reassigning sys.stdout
allows the python debugger to be used.
--HG--
extra : convert_revision : 63fc268f2e80f338ad1a7abe54b9e979e2239609
This allows us to change memory modes as well.
Clean up the code while we're at it.
--HG--
extra : convert_revision : fc5fee9ffd08b791f0607ee2688f32aa65d15354
Add support for declaring SimObjects to swig so their members can be wrapped.
Make sim_object.i only contain declarations for SimObject.
Create system.i to contain declarations for System.
Update python code to properly call the C++ given the new changes.
--HG--
extra : convert_revision : 82076ee69e8122d56e91b92d6767e356baae420a
As it is now, some objects will get the incorrect value depending where they
were defined.
--HG--
extra : convert_revision : a11a14842f9524739cbf54a48be6ec051f371200
creation and initialization now happens in python. Parameter objects
are generated and initialized by python. The .ini file is now solely for
debugging purposes and is not used in construction of the objects in any
way.
--HG--
extra : convert_revision : 7e722873e417cb3d696f2e34c35ff488b7bff4ed
configs/example/memtest.py:
PhysicalMemory has vector of uniform ports instead of one special one.
Other updates to fix obsolete brokenness.
src/mem/physical.cc:
src/mem/physical.hh:
src/python/m5/objects/PhysicalMemory.py:
Have vector of uniform ports instead of one special one.
src/python/swig/pyobject.cc:
Add comment.
--HG--
extra : convert_revision : a4a764dcdcd9720bcd07c979d0ece311fc8cb4f1
set the latency parameter in terms of a latency
add caches to tsunami-simple configs
configs/common/Caches.py:
tests/configs/memtest.py:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
set the latency parameter in terms of a latency
configs/common/FSConfig.py:
give the bridge a default latency too
src/mem/cache/cache_builder.cc:
src/python/m5/objects/BaseCache.py:
remove hit_latency and make latency do the right thing
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
add caches to tsunami-simple configs
--HG--
extra : convert_revision : 37bef7c652e97c8cdb91f471fba62978f89019f1
figure out the block size from devices attached to the bus otherwise use a default block size when no devices that care are attached
configs/common/FSConfig.py:
src/mem/bridge.cc:
src/mem/bridge.hh:
src/python/m5/objects/Bridge.py:
fix partial writes with a functional memory hack
src/mem/bus.cc:
src/mem/bus.hh:
src/python/m5/objects/Bus.py:
figure out the block size from devices attached to the bus otherwise use a default block size when no devices that care are attached
src/mem/packet.cc:
fix WriteInvalidateResp to not be a request that needs a response since it isn't
src/mem/port.hh:
by default return 0 for deviceBlockSize instead of panicing. This makes finding the block size the bus should use easier
--HG--
extra : convert_revision : 3fcfe95f9f392ef76f324ee8bd1d7f6de95c1a64
and python code into m5 to allow swig an python code to
easily added by any SConscript instead of just the one in
src/python. This provides SwigSource and PySource for
adding new files to m5 (similar to Source for C++). Also
provides SimObject for including files that contain SimObject
information and build the m5.objects __init__.py file.
--HG--
extra : convert_revision : 38b50a0629846ef451ed02f96fe3633947df23eb
unproxy() needs to return a new object otherwise all
instances will use the same value. This fix is more
or less unique to NextEthernetAddr because its use of
the proxy stuff is a bit different than everything else.
--HG--
extra : convert_revision : 2ce452e37d00b9ba76b6abfaec0ad2e0073920d7
directly configured by python. Move stuff from root.(cc|hh) to
core.(cc|hh) since it really belogs there now.
In the process, simplify how ticks are used in the python code.
--HG--
extra : convert_revision : cf82ee1ea20f9343924f30bacc2a38d4edee8df3
configs/common/FSConfig.py:
add an attachOnChipIO to force people to think about where "onchip" i/o should be connected in their hierarchy
--HG--
extra : convert_revision : cf79a9a00760b7daf28063f407a04bd38b956843
configs/common/FSConfig.py:
Use binaries we've compiled instead of the ones that come with Legion
src/arch/alpha/interrupts.hh:
get rid of post(int int_type) and add a get_vec function that gets the interrupt vector for an interrupt number
src/arch/sparc/asi.cc:
Add AsiIsInterrupt() to AsiIsMmu()
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
Add InterruptVector type
src/arch/sparc/interrupts.hh:
rework interrupts. They are no longer cleared when created... A I/O or ASI read/write needs to happen before they are cleared
src/arch/sparc/isa_traits.hh:
Add the "interrupt" trap types to isa traits
src/arch/sparc/miscregfile.cc:
add names for all the misc registers and possible post an interrupt when TL is changed.
src/arch/sparc/miscregfile.hh:
Add a helper function to post an interrupt when pil < some set softint
src/arch/sparc/regfile.cc:
src/arch/sparc/regfile.hh:
InterruptLevel shouldn't really live here, moved to interrupt.hh
src/arch/sparc/tlb.cc:
Add interrupt ASIs to TLB
src/arch/sparc/ua2005.cc:
Add checkSoftInt to check if a softint needs to be posted
Check that a tickCompare isn't scheduled before scheduling one
Post and clear interrupts on queue writes and what not
src/base/bitfield.hh:
Add an helper function to return the msb that is set
src/cpu/base.cc:
src/cpu/base.hh:
get rid of post_interrupt(type) since it's no longer needed.. Add a way to see what interrupts are pending
src/cpu/intr_control.cc:
src/cpu/intr_control.hh:
src/dev/alpha/tsunami_cchip.cc:
src/python/m5/objects/IntrControl.py:
Make IntrControl have a system pointer rather than using a cpu pointer to get one
src/dev/sparc/SConscript:
add iob to SConsscrip
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.out:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.out:
update config.ini/out for intrcntrl not having a cpu pointer anymore
--HG--
extra : convert_revision : 38614f6b9ffc8f3c93949a94ff04b7d2987168dd
so things are organized in a more sensible manner. Take apart
finalInit and expose the individual functions which are now
called from python. Make checkpointing a bit easier to use.
--HG--
extra : convert_revision : f470ddabbb47103e7b4734ef753c40089f2dcd9d
relevant code directly into the SimConsole object. Now,
you can easily turn off the listen port by just specifying
0 as the port.
--HG--
extra : convert_revision : c8937fa45b429d8a0728e6c720a599e38972aaf0
expose all of the relevant functionality to python. Clean
up the mysql code while we're at it.
--HG--
extra : convert_revision : 5b711202a5a452b8875ebefb136a156b65c24279
on in python. Fix the trace start code so it actually starts
when it is suppsed to. Make the Exec tracing stuff obey the
trace enabled flag.
--HG--
extra : convert_revision : 634ba0b4f52345d4bf40d43e239cef7ef43e7691
src/dev/alpha/tsunamireg.h:
get rid of things that aren't really tsunami registers
src/dev/platform.hh:
src/dev/uart.cc:
the uart pointer isn't used anymore
src/dev/simconsole.cc:
make the simconsole print something more useful to distinguish between various consoles in a single system
src/dev/uart8250.hh:
put the needed uart defines in here rather than including them from tsunamireg
src/python/m5/objects/T1000.py:
add a console to the T1000 config for the hypervisor
--HG--
extra : convert_revision : 76ca92122e611eaf76b989bc699582eef8297be8
the traceflags infrastructure. InstExec is now just Exec
and all of the command line options are now trace options.
--HG--
extra : convert_revision : 4adfa9dfbb32622d30ef4e63c06c7d87da793c8f
the script is invoked as main. This allows us to import traceflags.py
if we just want the list of available flags.
Embed traceflags.py into the zipfile so it can be accessed from the
python side of things. With this, print an error on invalid flags and
add --trace-help option that will print out the list of trace flags
that are compiled in. If a flag is prefixed with a '-', now that flag
will be disabled.
--HG--
extra : convert_revision : 2260a596b07d127c582ff73474dbbdb0583db524
access to enabling/disabling tracing. Command line is
unchanged except for the removal of --trace-cycle since
it's not so clear what that means.
--HG--
extra : convert_revision : c0164d92d3615d76d0c6acaabaafd92a9278212a
pass the tuple of python's struct_time and interpret that.
Fixes a problem where the local timezone leaked into the time
calculation. Also fix things so that the unix, python, and RTC
data sheets all get the right time. Provide both years since 1900
and BCD two digit year.
Put the date back at 1/1/2006 for now.
--HG--
extra : convert_revision : 473244572f468de2cb579a3dd7ae296a6f81f5d7
configs/common/FSConfig.py:
src/python/m5/objects/T1000.py:
add configuration for memory mapped disk
src/dev/sparc/SConscript:
add memory mapped disk to sconscript
--HG--
extra : convert_revision : d8df4a455cf48000042d0ff93a274985f4dbe905
