Commit graph

9206 commits

Author SHA1 Message Date
Nilay Vaish
4e6f048ef0 Ruby Slicc: remove the call to cin.get() function
If I understand correctly, this was put in place so that a debugger can be
attached when the protocol aborts. While this sounds useful, it is a problem
when the simulation is not being actively monitored. I think it is better to
remove this.
2012-09-10 12:20:34 -05:00
Andreas Hansson
0b1108c7a3 Ruby: Bump the stats after recent memory controller changes
This patch simply bumps the stats to avoid having failing
regressions. Someone with more insight in the changes should verify
that these differences all make sense.
2012-09-10 11:57:47 -04:00
Marco Elver
9e0edbcea8 Mem: Allow serializing of more than INT_MAX bytes
Despite gzwrite taking an unsigned for length, it returns an int for
bytes written; gzwrite fails if (int)len < 0.  Because of this, call
gzwrite with len no larger than INT_MAX: write in blocks of INT_MAX if
data to be written is larger than INT_MAX.
2012-09-10 11:57:43 -04:00
Palle Lyckegaard
21d4d50ba1 NetBSD: Build on NetBSD
Minor patch against so building on NetBSD is possible.
2012-09-10 11:57:42 -04:00
Andreas Hansson
3215ed9754 AddrRange: Remove the unused range_ops header
This patch prunes the range_ops header that is no longer used. The
bridge used it to do filtering of address ranges, but this is changed
since quite some time.

Ultimately this patch aims to simplify the handling of ranges before
specialising the AddrRange to an AddrRegion that also allows striping
bits to be selected.
2012-09-10 11:57:40 -04:00
Andreas Hansson
1f9c3bcb46 Inet: Remove the SackRange and its use
This patch aims to simplify the use of the Range class before
introducing a more elaborate AddrRegion to replace the AddrRange. The
SackRange is the only use of the range class besides address ranges,
and the removal of this use makes for an easier modification of the
range class.

The functionlity that is removed with this patch is not used anywhere
throughout the code base.
2012-09-10 11:57:39 -04:00
Andreas Hansson
d628344574 Device: Update stats for PIO and PCI latency change
This patch merely updates the regression stats to reflect the change
in PIO and PCI latency.
2012-09-10 11:57:37 -04:00
Andreas Hansson
cf5935445f Device: Bump PIO and PCI latencies to more reasonable values
This patch addresses a previously highlighted issue with the default
latencies used for PIO and PCI devices. The values are merely educated
guesses and might not represent the particular system you want to
model. However, the values in this patch are definitely far more
realistic than the previous ones.

In i8254xGBe, the writeConfig method is updated to use configDelay
instead of pioDelay.

A follow-up patch will update the regression stats.
2012-09-10 11:57:36 -04:00
Nilay Vaish
0b45ae5df3 se.py: support specifying multiple programs via command line
This patch allows for specifying multiple programs via command line. It also
adds an option for specifying whether to use of SMT. But SMT does not work for
the o3 cpu as of now.
2012-09-09 09:33:45 -05:00
Andreas Sandberg
d4a6d9846a sim: Update the SimObject documentation
Includes a small change in sim_object.cc that adds the name space to
the output stream parameter in serializeAll. Leaving out the name
space unfortunately confuses Doxygen.
2012-09-07 14:20:53 -05:00
Andreas Sandberg
2f397f314b sim: Remove the unused SimObject::regFormulas method
Simulation objects normally register derived statistics, presumably
what regFormulas originally was meant for, in regStats(). This patch
removes regRegformulas since there is no need to have a separate
method call to register formulas.
2012-09-07 14:20:53 -05:00
Ali Saidi
03ff612054 O3: Get rid of incorrect assert in RAS. 2012-09-07 14:20:53 -05:00
Ali Saidi
2059c01673 dev: Fix bifield definition in timer_cpulocal.hh
Bitfield definition in the local timer model for ARM had the bitfield
range numbers reversed which could lead to buggy behavior.
2012-09-07 14:20:53 -05:00
Ali Saidi
98e1ce638f ARM: Fix the compiler and platform identification for building on ARM. 2012-09-07 14:20:53 -05:00
Ali Saidi
0ecb351c51 ARM: fix m5 op binary to properly convert 64bit operands 2012-09-07 14:20:53 -05:00
Matt Evans
25c1933ffe ARM: Fix issue with with way MPIDR is read to include affinity levels.
The simple_bootloader checks for CPU0 in a manner incompatible with systems
actually using affinity levels -- just looking at MPIDR[7:0].  However, in
future we may wish to use real affinity levels and this method will be in danger
of matching several CPUs with affinity0 = 0.

Match affinity2 == affinity1 == affinity0 == 0 instead.
2012-09-07 14:20:53 -05:00
Ali Saidi
5217d5a451 Igbe: Newer kernels seem to allow TSO headers and packet data to be in one desc
Implement some code we used to panic on as it actually does happen with the
e1000 driver in Linux 3.3+. We used to assume that a TSO header would never
be part of a larger payload, however it appears as though it now can be.
2012-09-07 14:20:53 -05:00
Djordje Kovacevic
124aac72b4 CPU: O3-PipeView.py doesn't display the end of timelines.
Insts' timeline that stretches over multiple lines doesn't always get printed.
2012-09-07 14:20:53 -05:00
Krishnendra Nathella
3f5ee1cf8c sim: add validation to make sure there is memory where we're loading the kernel 2012-09-07 14:20:53 -05:00
Ali Saidi
3742b19b36 loader: initialize all memory in the ObjectFile objects.
Some bare metal build flows seem to build binaries that we aren't necessarily
expecting. Initialize everything to 0, so we don't make any assumptions about
what is or isn't in the binary.
2012-09-07 14:20:52 -05:00
Ali Saidi
8fc0cef611 ARM: Fix one of the timers used in the VExpress EMM platform. 2012-09-07 14:20:52 -05:00
Andreas Hansson
287ea1a081 Param: Transition to Cycles for relevant parameters
This patch is a first step to using Cycles as a parameter type. The
main affected modules are the CPUs and the Ruby caches. There are
definitely plenty more places that are affected, but this patch serves
as a starting point to making the transition.

An important part of this patch is to actually enable parameters to be
specified as Param.Cycles which involves some changes to params.py.
2012-09-07 12:34:38 -04:00
Joel Hestness
4124ea09f8 stats: Update Ruby regressions for memory controller fix 2012-09-05 20:53:34 -05:00
Joel Hestness
6924e10978 Ruby Memory Controller: Fix clocking 2012-09-05 20:51:41 -05:00
Jason Power
494f6a858e Ruby: Correct DataBlock =operator
The =operator for the DataBlock class was incorrectly interpreting the class
member m_alloc. This variable stands for whether the assigned memory for the
data block needs to be freed or not by the class itself. It seems that the
=operator interpreted the variable as whether the memory is assigned to the
data block. This wrong interpretation was causing values not to propagate
to RubySystem::m_mem_vec_ptr. This caused major issues with restoring from
checkpoints when using a protocol which verified that the cache data was
consistent with the backing store (i.e. MOESI-hammer).
2012-08-28 17:57:51 -05:00
Andreas Hansson
0cacf7e817 Clock: Add a Cycles wrapper class and use where applicable
This patch addresses the comments and feedback on the preceding patch
that reworks the clocks and now more clearly shows where cycles
(relative cycle counts) are used to express time.

Instead of bumping the existing patch I chose to make this a separate
patch, merely to try and focus the discussion around a smaller set of
changes. The two patches will be pushed together though.

This changes done as part of this patch are mostly following directly
from the introduction of the wrapper class, and change enough code to
make things compile and run again. There are definitely more places
where int/uint/Tick is still used to represent cycles, and it will
take some time to chase them all down. Similarly, a lot of parameters
should be changed from Param.Tick and Param.Unsigned to
Param.Cycles.

In addition, the use of curTick is questionable as there should not be
an absolute cycle. Potential solutions can be built on top of this
patch. There is a similar situation in the o3 CPU where
lastRunningCycle is currently counting in Cycles, and is still an
absolute time. More discussion to be had in other words.

An additional change that would be appropriate in the future is to
perform a similar wrapping of Tick and probably also introduce a
Ticks class along with suitable operators for all these classes.
2012-08-28 14:30:33 -04:00
Andreas Hansson
d53d04473e Clock: Rework clocks to avoid tick-to-cycle transformations
This patch introduces the notion of a clock update function that aims
to avoid costly divisions when turning the current tick into a
cycle. Each clocked object advances a private (hidden) cycle member
and a tick member and uses these to implement functions for getting
the tick of the next cycle, or the tick of a cycle some time in the
future.

In the different modules using the clocks, changes are made to avoid
counting in ticks only to later translate to cycles. There are a few
oddities in how the O3 and inorder CPU count idle cycles, as seen by a
few locations where a cycle is subtracted in the calculation. This is
done such that the regression does not change any stats, but should be
revisited in a future patch.

Another, much needed, change that is not done as part of this patch is
to introduce a new typedef uint64_t Cycle to be able to at least hint
at the unit of the variables counting Ticks vs Cycles. This will be
done as a follow-up patch.

As an additional follow up, the thread context still uses ticks for
the book keeping of last activate and last suspend and this should
probably also be changed into cycles as well.
2012-08-28 14:30:31 -04:00
Andreas Hansson
d14e5857c7 Port: Stricter port bind/unbind semantics
This patch tightens up the semantics around port binding and checks
that the ports that are being bound are currently not connected, and
similarly connected before unbind is called.

The patch consequently also changes the order of the unbind and bind
for the switching of CPUs to ensure that the rules are adhered
to. Previously the ports would be "over-written" without any check.

There are no changes in behaviour due to this patch, and the only
place where the unbind functionality is used is in the CPU.
2012-08-28 14:30:27 -04:00
Andreas Hansson
fb5dd28420 Checker: Bump the realview-o3-checker regression
This patch bumps the stats for the realview-o3-checker after fixing
the checker CPU in the previous patch.
2012-08-28 14:30:25 -04:00
Andreas Hansson
105ad88d35 Checker: Fix checker CPU ports
This patch updates how the checker CPU handles the ports such that the
regressions will once again run without causing a panic.

A minor amount of tidying up was also done as part of this patch.
2012-08-28 14:30:24 -04:00
Andreas Hansson
d090f4d930 swig: Disable unused value warning with llvm 3.1 compilers
This patch disables a warning for unused values which causes problems
when compiling the swig-generated sources using recent llvm-based
compilers like llvm-gcc and clang.
2012-08-28 14:30:22 -04:00
Anthony Gutierrez
5b1614de02 sim: fix overflow check in simulate because Tick is now unsigned 2012-08-27 20:53:20 -04:00
Nilay Vaish
85c7352462 Ruby: remove README.debugging and Decommissioning_note
These files were relevant when Ruby was part of GEMS. They are not required
any longer.
2012-08-27 14:57:46 -05:00
Nilay Vaish
0737837109 System: Remove redundant call to startupCPU 2012-08-27 01:14:46 -05:00
Nilay Vaish
9190940511 Ruby: Remove RubyEventQueue
This patch removes RubyEventQueue. Consumer objects now rely on RubySystem
or themselves for scheduling events.
2012-08-27 01:00:55 -05:00
Nilay Vaish
7122b83d8f Ruby Memory Vector: Allow more than 4GB of memory
The memory size variable was a 32-bit int. This meant that the size of the
memory was limited to 4GB. This patch changes the type of the variable to
64-bit to support larger memory sizes. Thanks to Raghuraman Balasubramanian
for bringing this to notice.
2012-08-27 01:00:54 -05:00
Nilay Vaish
1032bc72ed Regression: updates ruby.stats due to change in virtual network 2012-08-25 15:49:07 -05:00
Nilay Vaish
b422994fea MESI Protocol: Correct the virtual network in profile functions
The virtual network in a couple of places was incorrectly mentioned
as 3 in place of 1. This is being corrected.
2012-08-25 15:49:06 -05:00
Nilay Vaish
01f1430833 MESI Coherence Protocol: Add copyright notice 2012-08-25 13:16:45 -05:00
Andreas Hansson
2c1052cd4d DMA: Refactor the DMA device and align timing and atomic
This patch does a bunch of house-keeping updates on the DMA, including
indentation, and formatting, but most importantly breaks out the
response handling such that it can be shared between the atomic and
timing modes. It also removes a potential bug caused by the atomic
handling of responses only deleting the allocated request (pkt->req)
once the DMA action completes instead of doing so for every packet.

Before this patch, the handling of responses was near identical for
atomic and timing, but the code was simply duplicated. With this
patch, the handleResp method deals with the responses in both cases.

There are further updates to make after removing the NACKs, but that
will be part of a separate follow-up patch. This patch does not change
the behaviour of any regression.
2012-08-22 11:40:01 -04:00
Andreas Hansson
c60db56741 Packet: Remove NACKs from packet and its use in endpoints
This patch removes the NACK frrom the packet as there is no longer any
module in the system that issues them (the bridge was the only one and
the previous patch removes that).

The handling of NACKs was mostly avoided throughout the code base, by
using e.g. panic or assert false, but in a few locations the NACKs
were actually dealt with (although NACKs never occured in any of the
regressions). Most notably, the DMA port will now never receive a NACK
and the backoff time is thus never changed. As a consequence, the
entire backoff mechanism (similar to a PCI bus) is now removed and the
DMA port entirely relies on the bus performing the arbitration and
issuing a retry when appropriate. This is more in line with e.g. PCIe.

Surprisingly, this patch has no impact on any of the regressions. As
mentioned in the patch that removes the NACK from the bridge, a
follow-up patch should change the request and response buffer size for
at least one regression to also verify that the system behaves as
expected when the bridge fills up.
2012-08-22 11:39:59 -04:00
Andreas Hansson
a6074016e2 Bridge: Remove NACKs in the bridge and unify with packet queue
This patch removes the NACKing in the bridge, as the split
request/response busses now ensure that protocol deadlocks do not
occur, i.e. the message-dependency chain is broken by always allowing
responses to make progress without being stalled by requests. The
NACKs had limited support in the system with most components ignoring
their use (with a suitable call to panic), and as the NACKs are no
longer needed to avoid protocol deadlocks, the cleanest way is to
simply remove them.

The bridge is the starting point as this is the only place where the
NACKs are created. A follow-up patch will remove the code that deals
with NACKs in the endpoints, e.g. the X86 table walker and DMA
port. Ultimately the type of packet can be complete removed (until
someone sees a need for modelling more complex protocols, which can
now be done in parts of the system since the port and interface is
split).

As a consequence of the NACK removal, the bridge now has to send a
retry to a master if the request or response queue was full on the
first attempt. This change also makes the bridge ports very similar to
QueuedPorts, and a later patch will change the bridge to use these. A
first step in this direction is taken by aligning the name of the
member functions, as done by this patch.

A bit of tidying up has also been done as part of the simplifications.

Surprisingly, this patch has no impact on any of the
regressions. Hence, there was never any NACKs issued. In a follow-up
patch I would suggest changing the size of the bridge buffers set in
FSConfig.py to also test the situation where the bridge fills up.
2012-08-22 11:39:58 -04:00
Andreas Hansson
e317d8b9ff Port: Extend the QueuedPort interface and use where appropriate
This patch extends the queued port interfaces with methods for
scheduling the transmission of a timing request/response. The methods
are named similar to the corresponding sendTiming(Snoop)Req/Resp,
replacing the "send" with "sched". As the queues are currently
unbounded, the methods always succeed and hence do not return a value.

This functionality was previously provided in the subclasses by
calling PacketQueue::schedSendTiming with the appropriate
parameters. With this change, there is no need to introduce these
extra methods in the subclasses, and the use of the queued interface
is more uniform and explicit.
2012-08-22 11:39:56 -04:00
Andreas Hansson
70e99e0b91 Device: Remove overloaded pio_latency parameter
This patch removes the overloading of the parameter, which seems both
redundant, and possibly incorrect.

The PciConfigAll now also uses a Param.Latency rather than a
Param.Tick. For backwards compatibility it still sets the pio_latency
to 1 tick. All the comments have also been updated to not state that
it is in simticks when it is not necessarily the case.
2012-08-21 05:50:03 -04:00
Andreas Hansson
a81c969529 CPU: Remove overloaded function_trace_start parameter
This patch removes the overloading of the parameter, which seems both
redundant, and possibly incorrect.

The inorder CPU is particularly interesting as it uses a different
name for the parameter, and never make any use of it internally.
2012-08-21 05:49:43 -04:00
Andreas Hansson
5803309574 PacketQueue: Allow queuing in the same tick as desired send tick
This patch allows packets to be enqueued in the same tick as they are
intended to be sent. This does not imply they actually are sent that
tick, although that is possible.

This change is useful for module that use the queued ports primarly to
avoid handling the flow control involved in sending and retrying
packets.
2012-08-21 05:49:24 -04:00
Andreas Hansson
4be1ae3cf8 EventManager: Remove test for NULL pointer in constructor
This patch tidies up the EventManager constructor and prunes a corner
case where the EventManager would initialise its eventq pointer to
NULL. This would cause segmentation faults on actual use and should
never happen.
2012-08-21 05:49:18 -04:00
Andreas Hansson
016593f2e9 Clock: Make Tick unsigned and remove UTick
This patch makes the Tick unsigned and removes the UTick typedef. The
ticks should never be negative, and there was only one major issue
with removing it, caused by the o3 CPU using a -1 as an initial value.

The patch has no impact on any regressions.
2012-08-21 05:49:09 -04:00
Andreas Hansson
452217817f Clock: Move the clock and related functions to ClockedObject
This patch moves the clock of the CPU, bus, and numerous devices to
the new class ClockedObject, that sits in between the SimObject and
MemObject in the class hierarchy. Although there are currently a fair
amount of MemObjects that do not make use of the clock, they
potentially should do so, e.g. the caches should at some point have
the same clock as the CPU, potentially with a 1:n ratio. This patch
does not introduce any new clock objects or object hierarchies
(clusters, clock domains etc), but is still a step in the direction of
having a more structured approach clock domains.

The most contentious part of this patch is the serialisation of clocks
that some of the modules (but not all) did previously. This
serialisation should not be needed as the clock is set through the
parameters even when restoring from the checkpoint. In other words,
the state is "stored" in the Python code that creates the modules.

The nextCycle methods are also simplified and the clock phase
parameter of the CPU is removed (this could be part of a clock object
once they are introduced).
2012-08-21 05:49:01 -04:00
Andreas Hansson
4ebefc145a Checkpoint: Fix broken checkpointing functionality
This patch fixes the checkpointing by ensuring that the directory is
passer to the scriptCheckpoints function, and that the num_checkpoints
is not used before it is initialised.
2012-08-21 05:48:52 -04:00