Gabe Black
3e1cda5080
X86: Add a latency that describes how long an interrupt takes to propagate through the IO APIC.
2009-12-19 01:50:06 -08:00
Nathan Binkert
2c5fe6f95e
build: fix compile problems pointed out by gcc 4.4
2009-11-04 16:57:01 -08:00
Nathan Binkert
d9f39c8ce7
arch: nuke arch/isa_specific.hh and move stuff to generated config/the_isa.hh
2009-09-23 08:34:21 -07:00
Gabe Black
8f49cd1123
X86: Move the simulated date in X86_FS forward to 2012.
2009-08-17 20:25:15 -07:00
Gabe Black
38c2af17a5
X86: Set up the IDE device correctly, ie. with and using legacy ports.
2009-08-02 18:01:13 -07:00
Nathan Binkert
8d2e51c7f5
includes: sort includes again
2009-05-17 14:34:52 -07:00
Gabe Black
06b3e3c303
X86: Implement lowest priority interrupts more correctly.
...
Lowest priority interrupts are now delivered based on a rotating offset into
the list of potential recipients. There could be parasitic cases were a
processor gets picked on and ends up at that rotating offset all the time, but
it's much more likely that the group will stay consistent and the pain will be
distributed evenly.
2009-04-26 02:09:54 -07:00
Gabe Black
2f34a7eaeb
X86: Tell the function that sends int messages who to send to instead of figuring it out itself.
2009-04-26 02:09:27 -07:00
Gabe Black
88ab4bb257
X86: Make the local APICs register themselves with the IO APIC.
...
This is a hack so that the IO APIC can figure out information about the local
APICs. The local APICs still have no way to find out about each other.
Ideally, when the local APICs update state that's relevant to somebody else,
they'd send an update to everyone. Without being able to do a broadcast, that
would still require knowing who else there is to notify. Other broadcasts are
implemented using assumptions that may not always be true.
2009-04-26 02:09:13 -07:00
Gabe Black
c5e2cf841d
X86: Record the initial APIC ID which identifies an APIC in M5.
...
The ID as exposed to software can be changed. Tracking those changes in M5
would be cumbersome, especially since there's no guarantee the IDs will remain
unique.
2009-04-26 02:06:21 -07:00
Gabe Black
8d84f81e70
X86, Config: Make makeX86System consider the number of CPUs, and clean up interrupt assignment.
2009-04-26 02:04:32 -07:00
Gabe Black
e174239bd8
X86: Mask the PIC at startup to avoid a glitch which causes an NMI.
2009-04-19 04:15:06 -07:00
Gabe Black
bdda224d41
X86: Add a function which gets called when an interrupt message has been delivered.
2009-04-19 03:54:11 -07:00
Gabe Black
9549694ecd
X86: Make code that sends an interrupt from the IO APIC available for IPIs.
2009-04-19 02:42:19 -07:00
Gabe Black
82288e7c3e
X86: Add makeAtomicResponse to the read/write functions of x86 devices.
2009-02-25 10:16:43 -08:00
Gabe Black
73f579a804
X86: Add some missing default arguments.
2009-02-01 22:40:51 -08:00
Gabe Black
57be1dfe48
X86: Implement pciToDma.
2009-02-01 00:27:15 -08:00
Gabe Black
70cd5bfce5
X86: Configure the first PCI interrupt.
2009-02-01 00:26:10 -08:00
Gabe Black
f1b43b39a7
X86: Hook up the IDE controller interrupt line.
2009-02-01 00:25:15 -08:00
Gabe Black
3ecc38cb8b
Devices: Add support for legacy fixed IO locations in BARs.
2009-02-01 00:02:21 -08:00
Gabe Black
bb7ad80bbe
X86: Plug in an IDE controller.
2009-02-01 00:00:03 -08:00
Gabe Black
c2c5740b98
X86: Refactor and clean up the keyboard controller.
2009-01-31 23:59:25 -08:00
Gabe Black
7cf276bed3
X86: Add a keyboard controller device.
2009-01-31 23:59:01 -08:00
Gabe Black
0287f19ede
X86: Set up the console interrupt and add some DPRINTFs.
2009-01-31 23:56:46 -08:00
Gabe Black
e1c412cec6
X86: Configure the IO APIC more.
2009-01-31 23:44:05 -08:00
Gabe Black
6a3f255a84
X86: Rework interrupt pins to allow one to many connections.
2009-01-31 23:33:54 -08:00
Gabe Black
64b663c607
X86: Initialize the value behind port 61 so unused bits are consistent.
2009-01-31 23:26:43 -08:00
Gabe Black
56e182a6a9
X86: Add a dummy minimal DMA controller that doesn't do anything.
2009-01-25 20:35:00 -08:00
Gabe Black
151bc018dd
X86: Add a device to back the non-existant floppy drive controller.
2009-01-25 20:34:17 -08:00
Gabe Black
dbe28da1be
X86: Add fake devices for non-existant serial ports.
2009-01-25 20:33:52 -08:00
Nathan Binkert
44839d6b71
Fix a few more places where the context stuff wasn't changed
2008-11-05 07:20:03 -08:00
Nathan Binkert
9b8011e255
need to add packet_access.hh in order to get tempalte definition
2008-10-16 22:22:47 -07:00
Gabe Black
be6055e0f2
X86: Make auto eoi mode work in the I8259 PIC.
2008-10-12 23:27:08 -07:00
Gabe Black
fb5bb434a9
X86: Make non-specific EOI commands work.
2008-10-12 23:25:48 -07:00
Gabe Black
8e664f3959
X86: Make the I8259 PIC accept a specific EOI command.
2008-10-12 23:22:58 -07:00
Gabe Black
3a1905157e
X86: Create a mechanism for the IO APIC to access I8259 vectors.
2008-10-12 13:54:57 -07:00
Gabe Black
c35da8e495
X86: Actually use the extra vector bits we get from ICW2.
2008-10-12 13:51:48 -07:00
Gabe Black
876f4845f2
X86: Make the local APIC handle interrupt messages from the IO APIC.
2008-10-12 13:44:24 -07:00
Gabe Black
4d5c7f7038
X86: Change the default value for the IO APIC redirection table.
2008-10-12 13:35:26 -07:00
Gabe Black
557bde43c3
X86: Make APICs communicate through the memory system.
2008-10-12 13:28:54 -07:00
Gabe Black
168e524b9b
X86: Create an IO APIC device.
2008-10-11 16:08:14 -07:00
Gabe Black
a2599e4fc1
X86: Set up a mechanism for the I8254 timer to cause interrupts.
2008-10-11 15:15:34 -07:00
Gabe Black
3af428606a
X86: Rename the PC device to Pc.
...
--HG--
rename : src/dev/x86/PC.py => src/dev/x86/Pc.py
2008-10-11 02:23:40 -07:00
Gabe Black
826621eb17
X86: Bring the South Bridge device into dev/x86 and get rid of south_bridge directory.
...
--HG--
rename : src/dev/x86/south_bridge/SouthBridge.py => src/dev/x86/SouthBridge.py
rename : src/dev/x86/south_bridge/south_bridge.cc => src/dev/x86/south_bridge.cc
rename : src/dev/x86/south_bridge/south_bridge.hh => src/dev/x86/south_bridge.hh
2008-10-11 02:21:44 -07:00
Gabe Black
bc2217eefc
X86: Change I8254 and PCSpeaker devices from subdevices to SimObjects and eliminate subdevices.
...
--HG--
rename : src/dev/x86/south_bridge/i8254.cc => src/dev/x86/i8254.cc
rename : src/dev/x86/south_bridge/i8254.hh => src/dev/x86/i8254.hh
rename : src/dev/x86/south_bridge/speaker.cc => src/dev/x86/speaker.cc
rename : src/dev/x86/south_bridge/speaker.hh => src/dev/x86/speaker.hh
2008-10-11 02:16:11 -07:00
Gabe Black
a6600fdd88
Devices: Make the Intel8254Timer device only use pointers to its counters.
2008-10-11 01:49:39 -07:00
Gabe Black
539563e04b
X86: Make the CMOS and I8259 devices use IntDev and IntPin.
2008-10-11 01:45:25 -07:00
Gabe Black
119e127d71
X86: Create the IntDev and IntPin system.
...
The IntDev class is a base for anything that supports IntPins. IntPins allow
devices to generically trigger interrupts on a particular pin of an IntDev
device without having to know what the device is or what pin they're attached
to.
2008-10-11 01:37:04 -07:00
Gabe Black
8c532d6297
X86: Hook the CMOS device to the I8259 PICs.
2008-10-11 01:31:32 -07:00
Gabe Black
cf9afbba51
X86: Make the I8259 decipher the commands it's given, and add some of it's registers.
2008-10-11 01:28:35 -07:00
