Ali Saidi
bebbc9dc89
CPA: Add annotations to IGbE and CopyEngine device models.
2009-02-26 19:29:17 -05:00
Gabe Black
4a64493158
Devices: Make the RTC device reflect the use of BCD in its status registers.
2009-02-25 10:22:49 -08:00
Gabe Black
82288e7c3e
X86: Add makeAtomicResponse to the read/write functions of x86 devices.
2009-02-25 10:16:43 -08:00
Nathan Binkert
3fa9812e1d
debug: Move debug_break into src/base
2009-02-23 11:48:40 -08:00
Steve Reinhardt
6cfff91d43
Make etherdump timestamps zero-based.
...
We previously used the actual wall time for the base timestamps,
making etherdumps non-deterministic. This fixes that problem and
gets rid of the "malformed packet" at the front that we needed to
provide the right base timestamp to wireshark/tcpdump.
2009-02-17 19:24:46 -08:00
Gabe Black
73f579a804
X86: Add some missing default arguments.
2009-02-01 22:40:51 -08:00
Gabe Black
57be1dfe48
X86: Implement pciToDma.
2009-02-01 00:27:15 -08:00
Gabe Black
70cd5bfce5
X86: Configure the first PCI interrupt.
2009-02-01 00:26:10 -08:00
Gabe Black
f1b43b39a7
X86: Hook up the IDE controller interrupt line.
2009-02-01 00:25:15 -08:00
Gabe Black
3ecc38cb8b
Devices: Add support for legacy fixed IO locations in BARs.
2009-02-01 00:02:21 -08:00
Gabe Black
bb7ad80bbe
X86: Plug in an IDE controller.
2009-02-01 00:00:03 -08:00
Gabe Black
c2c5740b98
X86: Refactor and clean up the keyboard controller.
2009-01-31 23:59:25 -08:00
Gabe Black
7cf276bed3
X86: Add a keyboard controller device.
2009-01-31 23:59:01 -08:00
Gabe Black
0287f19ede
X86: Set up the console interrupt and add some DPRINTFs.
2009-01-31 23:56:46 -08:00
Gabe Black
e1c412cec6
X86: Configure the IO APIC more.
2009-01-31 23:44:05 -08:00
Gabe Black
6a3f255a84
X86: Rework interrupt pins to allow one to many connections.
2009-01-31 23:33:54 -08:00
Gabe Black
64b663c607
X86: Initialize the value behind port 61 so unused bits are consistent.
2009-01-31 23:26:43 -08:00
Ali Saidi
35a85a4e86
Config: Cause a fatal() when a parameter without a default value isn't set(FS #315 ).
2009-01-30 19:08:13 -05:00
Gabe Black
56e182a6a9
X86: Add a dummy minimal DMA controller that doesn't do anything.
2009-01-25 20:35:00 -08:00
Gabe Black
151bc018dd
X86: Add a device to back the non-existant floppy drive controller.
2009-01-25 20:34:17 -08:00
Gabe Black
dbe28da1be
X86: Add fake devices for non-existant serial ports.
2009-01-25 20:33:52 -08:00
Gabe Black
919c3e7fb6
Dev: Make the RTC device ignore writes to a read only bit.
2009-01-25 20:32:26 -08:00
Gabe Black
3f9e2350a1
Devices: Make the destructor virtual on the CopyEnginChannel object.
...
This fixes a compile warning which becomes an error.
2009-01-25 20:26:53 -08:00
Ali Saidi
37ffe52ca4
IGbE: Fix two e1000 driver bugs that I missed before.
2009-01-23 17:19:47 -05:00
Ali Saidi
140b4b891e
CopyEngine: Implement a I/OAT-like copy engine.
2009-01-17 18:55:09 -05:00
Ali Saidi
2adc60795b
IGbE: Implement header splitting with large MTU
2009-01-06 10:36:57 -05:00
Ali Saidi
9f89d43b65
IGbE: Remove is8257 variable
2009-01-06 10:36:55 -05:00
Gabe Black
f0d1a20971
PCI: Add some missing breaks to a couple case statements.
2008-12-15 00:47:01 -08:00
Author Name
13f7fdcf67
The ide_ctrl serialize and unserialize were broken.
...
Multiple channels were saving their state under the
same name. This patch separates the saved state of
the primary and secondary channel.
2008-12-14 23:29:49 -08:00
Richard Strong
dae531c049
IDE: Fix serialization for the IDE controller.
2008-12-09 10:34:08 -08:00
Gabe Black
9192b7f1ef
Devices: Clean up the IDE controller.
2008-12-07 12:59:48 -08:00
Ali Saidi
dd788a23c9
IGbE: Add support for newer 8257x based Intel NICs
2008-12-05 13:58:22 -05:00
Ali Saidi
400e516261
IGbE: Add support for TCP segment offload
2008-12-05 13:58:21 -05:00
Steve Reinhardt
27e8f3c98a
DmaDevice: fix minor type in error message.
2008-11-10 14:45:31 -08:00
Nathan Binkert
44839d6b71
Fix a few more places where the context stuff wasn't changed
2008-11-05 07:20:03 -08:00
Lisa Hsu
46b56bb7b6
Fix SPARC_FS compile
2008-11-05 16:19:17 -05:00
Lisa Hsu
d857faf073
Add in Context IDs to the simulator. From now on, cpuId is almost never used,
...
the primary identifier for a hardware context should be contextId(). The
concept of threads within a CPU remains, in the form of threadId() because
sometimes you need to know which context within a cpu to manipulate.
2008-11-02 21:57:07 -05:00
Nathan Binkert
9b8011e255
need to add packet_access.hh in order to get tempalte definition
2008-10-16 22:22:47 -07:00
Gabe Black
be6055e0f2
X86: Make auto eoi mode work in the I8259 PIC.
2008-10-12 23:27:08 -07:00
Gabe Black
fb5bb434a9
X86: Make non-specific EOI commands work.
2008-10-12 23:25:48 -07:00
Gabe Black
8e664f3959
X86: Make the I8259 PIC accept a specific EOI command.
2008-10-12 23:22:58 -07:00
Gabe Black
3a1905157e
X86: Create a mechanism for the IO APIC to access I8259 vectors.
2008-10-12 13:54:57 -07:00
Gabe Black
c35da8e495
X86: Actually use the extra vector bits we get from ICW2.
2008-10-12 13:51:48 -07:00
Gabe Black
876f4845f2
X86: Make the local APIC handle interrupt messages from the IO APIC.
2008-10-12 13:44:24 -07:00
Gabe Black
4d5c7f7038
X86: Change the default value for the IO APIC redirection table.
2008-10-12 13:35:26 -07:00
Gabe Black
557bde43c3
X86: Make APICs communicate through the memory system.
2008-10-12 13:28:54 -07:00
Gabe Black
168e524b9b
X86: Create an IO APIC device.
2008-10-11 16:08:14 -07:00
Gabe Black
a2599e4fc1
X86: Set up a mechanism for the I8254 timer to cause interrupts.
2008-10-11 15:15:34 -07:00
Gabe Black
3af428606a
X86: Rename the PC device to Pc.
...
--HG--
rename : src/dev/x86/PC.py => src/dev/x86/Pc.py
2008-10-11 02:23:40 -07:00
Gabe Black
826621eb17
X86: Bring the South Bridge device into dev/x86 and get rid of south_bridge directory.
...
--HG--
rename : src/dev/x86/south_bridge/SouthBridge.py => src/dev/x86/SouthBridge.py
rename : src/dev/x86/south_bridge/south_bridge.cc => src/dev/x86/south_bridge.cc
rename : src/dev/x86/south_bridge/south_bridge.hh => src/dev/x86/south_bridge.hh
2008-10-11 02:21:44 -07:00
