gem5/src/mem/physical.cc

420 lines
14 KiB
C++
Raw Normal View History

/*
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
* Copyright (c) 2012 ARM Limited
2010-11-08 20:58:25 +01:00
* All rights reserved
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
* Authors: Andreas Hansson
*/
#include <sys/mman.h>
#include <sys/types.h>
#include <sys/user.h>
#include <fcntl.h>
#include <unistd.h>
#include <zlib.h>
#include <cerrno>
#include <climits>
#include <cstdio>
#include <iostream>
#include <string>
#include "base/trace.hh"
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
#include "debug/BusAddrRanges.hh"
#include "debug/Checkpoint.hh"
#include "mem/abstract_mem.hh"
#include "mem/physical.hh"
using namespace std;
PhysicalMemory::PhysicalMemory(const string& _name,
const vector<AbstractMemory*>& _memories) :
_name(_name), size(0)
{
// add the memories from the system to the address map as
// appropriate
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
for (vector<AbstractMemory*>::const_iterator m = _memories.begin();
m != _memories.end(); ++m) {
// only add the memory if it is part of the global address map
if ((*m)->isInAddrMap()) {
memories.push_back(*m);
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
// calculate the total size once and for all
size += (*m)->size();
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
// add the range to our interval tree and make sure it does not
// intersect an existing range
if (addrMap.insert((*m)->getAddrRange(), *m) == addrMap.end())
fatal("Memory address range for %s is overlapping\n",
(*m)->name());
} else {
DPRINTF(BusAddrRanges,
"Skipping memory %s that is not in global address map\n",
(*m)->name());
// this type of memory is used e.g. as reference memory by
// Ruby, and they also needs a backing store, but should
// not be part of the global address map
// simply do it independently, also note that this kind of
// memories are allowed to overlap in the logic address
// map
vector<AbstractMemory*> unmapped_mems;
unmapped_mems.push_back(*m);
createBackingStore((*m)->getAddrRange(), unmapped_mems);
}
}
// iterate over the increasing addresses and chunks of contigous
// space to be mapped to backing store, also remember what
// memories constitute the range so we can go and find out if we
// have to init their parts to zero
vector<AbstractMemory*> curr_memories;
for (AddrRangeMap<AbstractMemory*>::const_iterator r = addrMap.begin();
r != addrMap.end(); ++r) {
// simply skip past all memories that are null and hence do
// not need any backing store
if (!r->second->isNull()) {
// this will eventually be extended to support merging of
// interleaved address ranges, and although it might seem
// overly complicated at this point it will all be used
curr_memories.push_back(r->second);
createBackingStore(r->first, curr_memories);
curr_memories.clear();
}
}
}
void
PhysicalMemory::createBackingStore(AddrRange range,
const vector<AbstractMemory*>& _memories)
{
// perform the actual mmap
DPRINTF(BusAddrRanges, "Creating backing store for range %x:%x\n",
range.start, range.end);
int map_flags = MAP_ANON | MAP_PRIVATE;
uint8_t* pmem = (uint8_t*) mmap(NULL, range.size(),
PROT_READ | PROT_WRITE,
map_flags, -1, 0);
if (pmem == (uint8_t*) MAP_FAILED) {
perror("mmap");
fatal("Could not mmap %d bytes for range %x:%x!\n", range.size(),
range.start, range.end);
}
// remember this backing store so we can checkpoint it and unmap
// it appropriately
backingStore.push_back(make_pair(range, pmem));
// count how many of the memories are to be zero initialized so we
// can see if some but not all have this parameter set
uint32_t init_to_zero = 0;
// point the memories to their backing store, and if requested,
// initialize the memory range to 0
for (vector<AbstractMemory*>::const_iterator m = _memories.begin();
m != _memories.end(); ++m) {
DPRINTF(BusAddrRanges, "Mapping memory %s to backing store\n",
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
(*m)->name());
(*m)->setBackingStore(pmem);
// if it should be zero, then go and make it so
if ((*m)->initToZero()) {
++init_to_zero;
}
}
if (init_to_zero != 0) {
if (init_to_zero != _memories.size())
fatal("Some, but not all memories in range %x:%x are set zero\n",
range.start, range.end);
memset(pmem, 0, range.size());
}
}
PhysicalMemory::~PhysicalMemory()
{
// unmap the backing store
for (vector<pair<AddrRange, uint8_t*> >::iterator s = backingStore.begin();
s != backingStore.end(); ++s)
munmap((char*)s->second, s->first.size());
}
bool
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
PhysicalMemory::isMemAddr(Addr addr) const
{
// see if the address is within the last matched range
if (addr != rangeCache) {
// lookup in the interval tree
AddrRangeMap<AbstractMemory*>::const_iterator r = addrMap.find(addr);
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
if (r == addrMap.end()) {
// not in the cache, and not in the tree
return false;
}
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
// the range is in the tree, update the cache
rangeCache = r->first;
}
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
assert(addrMap.find(addr) != addrMap.end());
rename store conditional stuff as extra data so it can be used for conditional swaps as well Add support for a twin 64 bit int load Add Memory barrier and write barrier flags as appropriate Make atomic memory ops atomic src/arch/alpha/isa/mem.isa: src/arch/alpha/locked_mem.hh: src/cpu/base_dyn_inst.hh: src/mem/cache/cache_blk.hh: src/mem/cache/cache_impl.hh: rename store conditional stuff as extra data so it can be used for conditional swaps as well src/arch/alpha/types.hh: src/arch/mips/types.hh: src/arch/sparc/types.hh: add a largest read data type for statically allocating read buffers in atomic simple cpu src/arch/isa_parser.py: Add support for a twin 64 bit int load src/arch/sparc/isa/decoder.isa: Make atomic memory ops atomic Add Memory barrier and write barrier flags as appropriate src/arch/sparc/isa/formats/mem/basicmem.isa: add post access code block and define a twinload format for twin loads src/arch/sparc/isa/formats/mem/blockmem.isa: remove old microcoded twin load coad src/arch/sparc/isa/formats/mem/mem.isa: swap.isa replaces the code in loadstore.isa src/arch/sparc/isa/formats/mem/util.isa: add a post access code block src/arch/sparc/isa/includes.isa: need bigint.hh for Twin64_t src/arch/sparc/isa/operands.isa: add a twin 64 int type src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/base.hh: src/cpu/simple/timing.cc: add support for twinloads add support for swap and conditional swap instructions rename store conditional stuff as extra data so it can be used for conditional swaps as well src/mem/packet.cc: src/mem/packet.hh: Add support for atomic swap memory commands src/mem/packet_access.hh: Add endian conversion function for Twin64_t type src/mem/physical.cc: src/mem/physical.hh: src/mem/request.hh: Add support for atomic swap memory commands Rename sc code to extradata --HG-- extra : convert_revision : 69d908512fb34a4e28b29a6e58b807fb1a6b1656
2007-02-12 19:06:30 +01:00
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
// either matched the cache or found in the tree
return true;
}
AddrRangeList
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
PhysicalMemory::getConfAddrRanges() const
{
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
// this could be done once in the constructor, but since it is unlikely to
// be called more than once the iteration should not be a problem
AddrRangeList ranges;
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
for (vector<AbstractMemory*>::const_iterator m = memories.begin();
m != memories.end(); ++m) {
if ((*m)->isConfReported()) {
ranges.push_back((*m)->getAddrRange());
}
}
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
return ranges;
}
void
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
PhysicalMemory::access(PacketPtr pkt)
{
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
assert(pkt->isRequest());
Addr addr = pkt->getAddr();
AddrRangeMap<AbstractMemory*>::const_iterator m = addrMap.find(addr);
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
assert(m != addrMap.end());
m->second->access(pkt);
}
void
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
PhysicalMemory::functionalAccess(PacketPtr pkt)
{
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
assert(pkt->isRequest());
Addr addr = pkt->getAddr();
AddrRangeMap<AbstractMemory*>::const_iterator m = addrMap.find(addr);
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
assert(m != addrMap.end());
m->second->functionalAccess(pkt);
}
void
PhysicalMemory::serialize(ostream& os)
{
// serialize all the locked addresses and their context ids
vector<Addr> lal_addr;
vector<int> lal_cid;
for (vector<AbstractMemory*>::iterator m = memories.begin();
m != memories.end(); ++m) {
const list<LockedAddr>& locked_addrs = (*m)->getLockedAddrList();
for (list<LockedAddr>::const_iterator l = locked_addrs.begin();
l != locked_addrs.end(); ++l) {
lal_addr.push_back(l->addr);
lal_cid.push_back(l->contextId);
}
}
arrayParamOut(os, "lal_addr", lal_addr);
arrayParamOut(os, "lal_cid", lal_cid);
// serialize the backing stores
unsigned int nbr_of_stores = backingStore.size();
SERIALIZE_SCALAR(nbr_of_stores);
unsigned int store_id = 0;
// store each backing store memory segment in a file
for (vector<pair<AddrRange, uint8_t*> >::iterator s = backingStore.begin();
s != backingStore.end(); ++s) {
nameOut(os, csprintf("%s.store%d", name(), store_id));
serializeStore(os, store_id++, s->first, s->second);
}
}
void
PhysicalMemory::serializeStore(ostream& os, unsigned int store_id,
AddrRange range, uint8_t* pmem)
{
// we cannot use the address range for the name as the
// memories that are not part of the address map can overlap
string filename = name() + ".store" + to_string(store_id) + ".pmem";
long range_size = range.size();
DPRINTF(Checkpoint, "Serializing physical memory %s with size %d\n",
filename, range_size);
SERIALIZE_SCALAR(store_id);
SERIALIZE_SCALAR(filename);
SERIALIZE_SCALAR(range_size);
// write memory file
string filepath = Checkpoint::dir() + "/" + filename.c_str();
int fd = creat(filepath.c_str(), 0664);
if (fd < 0) {
perror("creat");
fatal("Can't open physical memory checkpoint file '%s'\n",
filename);
}
gzFile compressed_mem = gzdopen(fd, "wb");
if (compressed_mem == NULL)
fatal("Insufficient memory to allocate compression state for %s\n",
filename);
uint64_t pass_size = 0;
// gzwrite fails if (int)len < 0 (gzwrite returns int)
for (uint64_t written = 0; written < range.size();
written += pass_size) {
pass_size = (uint64_t)INT_MAX < (range.size() - written) ?
(uint64_t)INT_MAX : (range.size() - written);
if (gzwrite(compressed_mem, pmem + written,
(unsigned int) pass_size) != (int) pass_size) {
fatal("Write failed on physical memory checkpoint file '%s'\n",
filename);
}
}
// close the compressed stream and check that the exit status
// is zero
if (gzclose(compressed_mem))
fatal("Close failed on physical memory checkpoint file '%s'\n",
filename);
}
void
PhysicalMemory::unserialize(Checkpoint* cp, const string& section)
{
// unserialize the locked addresses and map them to the
// appropriate memory controller
vector<Addr> lal_addr;
vector<int> lal_cid;
arrayParamIn(cp, section, "lal_addr", lal_addr);
arrayParamIn(cp, section, "lal_cid", lal_cid);
for(size_t i = 0; i < lal_addr.size(); ++i) {
AddrRangeMap<AbstractMemory*>::iterator m = addrMap.find(lal_addr[i]);
m->second->addLockedAddr(LockedAddr(lal_addr[i], lal_cid[i]));
}
// unserialize the backing stores
unsigned int nbr_of_stores;
UNSERIALIZE_SCALAR(nbr_of_stores);
for (unsigned int i = 0; i < nbr_of_stores; ++i) {
unserializeStore(cp, csprintf("%s.store%d", section, i));
}
}
void
PhysicalMemory::unserializeStore(Checkpoint* cp, const string& section)
{
const uint32_t chunk_size = 16384;
unsigned int store_id;
UNSERIALIZE_SCALAR(store_id);
string filename;
UNSERIALIZE_SCALAR(filename);
string filepath = cp->cptDir + "/" + filename;
// mmap memoryfile
int fd = open(filepath.c_str(), O_RDONLY);
if (fd < 0) {
perror("open");
fatal("Can't open physical memory checkpoint file '%s'", filename);
}
gzFile compressed_mem = gzdopen(fd, "rb");
if (compressed_mem == NULL)
fatal("Insufficient memory to allocate compression state for %s\n",
filename);
uint8_t* pmem = backingStore[store_id].second;
AddrRange range = backingStore[store_id].first;
// unmap file that was mmapped in the constructor, this is
// done here to make sure that gzip and open don't muck with
// our nice large space of memory before we reallocate it
munmap((char*) pmem, range.size());
long range_size;
UNSERIALIZE_SCALAR(range_size);
DPRINTF(Checkpoint, "Unserializing physical memory %s with size %d\n",
filename, range_size);
if (range_size != range.size())
fatal("Memory range size has changed! Saw %lld, expected %lld\n",
range_size, range.size());
pmem = (uint8_t*) mmap(NULL, range.size(), PROT_READ | PROT_WRITE,
MAP_ANON | MAP_PRIVATE, -1, 0);
if (pmem == (void*) MAP_FAILED) {
perror("mmap");
fatal("Could not mmap physical memory!\n");
}
uint64_t curr_size = 0;
long* temp_page = new long[chunk_size];
long* pmem_current;
uint32_t bytes_read;
while (curr_size < range.size()) {
bytes_read = gzread(compressed_mem, temp_page, chunk_size);
if (bytes_read == 0)
break;
assert(bytes_read % sizeof(long) == 0);
for (uint32_t x = 0; x < bytes_read / sizeof(long); x++) {
// Only copy bytes that are non-zero, so we don't give
// the VM system hell
if (*(temp_page + x) != 0) {
pmem_current = (long*)(pmem + curr_size + x * sizeof(long));
*pmem_current = *(temp_page + x);
}
}
curr_size += bytes_read;
}
delete[] temp_page;
if (gzclose(compressed_mem))
fatal("Close failed on physical memory checkpoint file '%s'\n",
filename);
}