gem5/src/dev/io_device.cc

286 lines
7.3 KiB
C++
Raw Normal View History

/*
* Copyright (c) 2006 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Ali Saidi
* Nathan Binkert
*/
#include "base/chunk_generator.hh"
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
#include "base/trace.hh"
#include "dev/io_device.hh"
#include "sim/builder.hh"
memory mode information now contained in system object States are now running, draining, or drained. memory state information moved into system object system parameter is not fs only for cpus Implement drain() support in devices Update for drain() call that returns number of times drain_event->process() will be called Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: Since se mode has a system, allow access to it Verify that the atomic cpu is connected to an atomic system on resume src/cpu/simple/base.cc: Since se mode has a system, allow access to it src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system Since se mode has a system, allow access to it Verify that the timing cpu is connected to an timing system on resume src/dev/ide_disk.cc: src/dev/io_device.cc: src/dev/io_device.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: src/dev/sinic.cc: src/dev/sinic.hh: Implement drain() support in devices src/python/m5/config.py: Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times src/python/m5/objects/BaseCPU.py: move system parameter out of fs to everyone src/sim/sim_object.cc: src/sim/sim_object.hh: States are now running, draining, or drained. memory state information moved into system object src/sim/system.cc: src/sim/system.hh: memory mode information now contained in system object --HG-- extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
2006-07-13 02:22:07 +02:00
#include "sim/system.hh"
memory mode information now contained in system object States are now running, draining, or drained. memory state information moved into system object system parameter is not fs only for cpus Implement drain() support in devices Update for drain() call that returns number of times drain_event->process() will be called Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: Since se mode has a system, allow access to it Verify that the atomic cpu is connected to an atomic system on resume src/cpu/simple/base.cc: Since se mode has a system, allow access to it src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system Since se mode has a system, allow access to it Verify that the timing cpu is connected to an timing system on resume src/dev/ide_disk.cc: src/dev/io_device.cc: src/dev/io_device.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: src/dev/sinic.cc: src/dev/sinic.hh: Implement drain() support in devices src/python/m5/config.py: Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times src/python/m5/objects/BaseCPU.py: move system parameter out of fs to everyone src/sim/sim_object.cc: src/sim/sim_object.hh: States are now running, draining, or drained. memory state information moved into system object src/sim/system.cc: src/sim/system.hh: memory mode information now contained in system object --HG-- extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
2006-07-13 02:22:07 +02:00
PioPort::PioPort(PioDevice *dev, System *s, std::string pname)
: SimpleTimingPort(dev->name() + pname), device(dev), sys(s)
{ }
Tick
PioPort::recvAtomic(Packet *pkt)
{
return device->recvAtomic(pkt);
}
void
PioPort::recvFunctional(Packet *pkt)
{
device->recvAtomic(pkt);
}
void
fixes for new memory system SConscript: comment out most devices add vport.cc arch/alpha/arguments.cc: arch/alpha/arguments.hh: push in alpha name space fix for new memory system arch/alpha/faults.cc: arch/alpha/faults.hh: Added an unimplemented fault that can be returned if a certain function isn't implemented arch/alpha/freebsd/system.cc: arch/alpha/linux/system.cc: arch/alpha/stacktrace.cc: arch/alpha/system.cc: arch/alpha/tlb.hh: arch/alpha/tru64/system.cc: fixed for new memory system arch/alpha/tlb.cc: fixed for new memory system removed code that seems to have no purpose arch/alpha/vtophys.cc: arch/alpha/vtophys.hh: fixed for new memory system put in namespace AlphaISA base/remote_gdb.cc: fix for new memory system cpu/cpu_exec_context.cc: cpu/cpu_exec_context.hh: cpu/exec_context.hh: create two ports one of physical accesses and one for superpage accesses Add functions getVirtPort() getPhysPort() delVirtPort(). To get statically allocated physical or virtual ports or if an execcontext is passed in get a dynamically allocated virtual port dev/alpha_console.cc: dev/alpha_console.hh: Redo for new memory system dev/io_device.cc: dev/io_device.hh: new I/O devices for new memory system kern/linux/events.cc: kern/linux/printk.cc: kern/linux/printk.hh: kern/tru64/dump_mbuf.hh: kern/tru64/printf.cc: kern/tru64/printf.hh: Arguments now in namespaces kern/tru64/tru64_events.cc: mem/bus.cc: fix for new memory syste mem/physical.hh: new addressranges function getPort should be public mem/port.hh: Add write/read methods to functional port update getDeviceAddrRanges to have a list of both snoops and response lists sim/pseudo_inst.cc: sim/system.cc: sim/system.hh: Update for new mem system sim/vptr.hh: comment out code and replace with panics This will need to be fixed at some point, but it's not easy. --HG-- extra : convert_revision : 41f41f422cfbab3751284d55cccb6ea64a7956e2
2006-04-06 06:51:46 +02:00
PioPort::getDeviceAddressRanges(AddrRangeList &resp, AddrRangeList &snoop)
{
fixes for new memory system SConscript: comment out most devices add vport.cc arch/alpha/arguments.cc: arch/alpha/arguments.hh: push in alpha name space fix for new memory system arch/alpha/faults.cc: arch/alpha/faults.hh: Added an unimplemented fault that can be returned if a certain function isn't implemented arch/alpha/freebsd/system.cc: arch/alpha/linux/system.cc: arch/alpha/stacktrace.cc: arch/alpha/system.cc: arch/alpha/tlb.hh: arch/alpha/tru64/system.cc: fixed for new memory system arch/alpha/tlb.cc: fixed for new memory system removed code that seems to have no purpose arch/alpha/vtophys.cc: arch/alpha/vtophys.hh: fixed for new memory system put in namespace AlphaISA base/remote_gdb.cc: fix for new memory system cpu/cpu_exec_context.cc: cpu/cpu_exec_context.hh: cpu/exec_context.hh: create two ports one of physical accesses and one for superpage accesses Add functions getVirtPort() getPhysPort() delVirtPort(). To get statically allocated physical or virtual ports or if an execcontext is passed in get a dynamically allocated virtual port dev/alpha_console.cc: dev/alpha_console.hh: Redo for new memory system dev/io_device.cc: dev/io_device.hh: new I/O devices for new memory system kern/linux/events.cc: kern/linux/printk.cc: kern/linux/printk.hh: kern/tru64/dump_mbuf.hh: kern/tru64/printf.cc: kern/tru64/printf.hh: Arguments now in namespaces kern/tru64/tru64_events.cc: mem/bus.cc: fix for new memory syste mem/physical.hh: new addressranges function getPort should be public mem/port.hh: Add write/read methods to functional port update getDeviceAddrRanges to have a list of both snoops and response lists sim/pseudo_inst.cc: sim/system.cc: sim/system.hh: Update for new mem system sim/vptr.hh: comment out code and replace with panics This will need to be fixed at some point, but it's not easy. --HG-- extra : convert_revision : 41f41f422cfbab3751284d55cccb6ea64a7956e2
2006-04-06 06:51:46 +02:00
snoop.clear();
device->addressRanges(resp);
}
bool
PioPort::recvTiming(Packet *pkt)
{
if (pkt->result == Packet::Nacked) {
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
resendNacked(pkt);
} else {
Tick latency = device->recvAtomic(pkt);
// turn packet around to go back to requester
pkt->makeTimingResponse();
sendTiming(pkt, latency);
}
return true;
}
PioDevice::~PioDevice()
{
if (pioPort)
delete pioPort;
}
void
PioDevice::init()
{
if (!pioPort)
panic("Pio port not connected to anything!");
pioPort->sendStatusChange(Port::RangeChange);
}
memory mode information now contained in system object States are now running, draining, or drained. memory state information moved into system object system parameter is not fs only for cpus Implement drain() support in devices Update for drain() call that returns number of times drain_event->process() will be called Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: Since se mode has a system, allow access to it Verify that the atomic cpu is connected to an atomic system on resume src/cpu/simple/base.cc: Since se mode has a system, allow access to it src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system Since se mode has a system, allow access to it Verify that the timing cpu is connected to an timing system on resume src/dev/ide_disk.cc: src/dev/io_device.cc: src/dev/io_device.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: src/dev/sinic.cc: src/dev/sinic.hh: Implement drain() support in devices src/python/m5/config.py: Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times src/python/m5/objects/BaseCPU.py: move system parameter out of fs to everyone src/sim/sim_object.cc: src/sim/sim_object.hh: States are now running, draining, or drained. memory state information moved into system object src/sim/system.cc: src/sim/system.hh: memory mode information now contained in system object --HG-- extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
2006-07-13 02:22:07 +02:00
unsigned int
PioDevice::drain(Event *de)
{
unsigned int count;
count = pioPort->drain(de);
if (count)
changeState(Draining);
else
changeState(Drained);
return count;
}
void
BasicPioDevice::addressRanges(AddrRangeList &range_list)
{
assert(pioSize != 0);
range_list.clear();
range_list.push_back(RangeSize(pioAddr, pioSize));
}
memory mode information now contained in system object States are now running, draining, or drained. memory state information moved into system object system parameter is not fs only for cpus Implement drain() support in devices Update for drain() call that returns number of times drain_event->process() will be called Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: Since se mode has a system, allow access to it Verify that the atomic cpu is connected to an atomic system on resume src/cpu/simple/base.cc: Since se mode has a system, allow access to it src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system Since se mode has a system, allow access to it Verify that the timing cpu is connected to an timing system on resume src/dev/ide_disk.cc: src/dev/io_device.cc: src/dev/io_device.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: src/dev/sinic.cc: src/dev/sinic.hh: Implement drain() support in devices src/python/m5/config.py: Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times src/python/m5/objects/BaseCPU.py: move system parameter out of fs to everyone src/sim/sim_object.cc: src/sim/sim_object.hh: States are now running, draining, or drained. memory state information moved into system object src/sim/system.cc: src/sim/system.hh: memory mode information now contained in system object --HG-- extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
2006-07-13 02:22:07 +02:00
DmaPort::DmaPort(DmaDevice *dev, System *s)
: Port(dev->name() + "-dmaport"), device(dev), sys(s), pendingCount(0),
actionInProgress(0), drainEvent(NULL)
{ }
bool
DmaPort::recvTiming(Packet *pkt)
{
if (pkt->result == Packet::Nacked) {
DPRINTF(DMA, "Received nacked Pkt %#x with State: %#x Addr: %#x\n",
pkt, pkt->senderState, pkt->getAddr());
pkt->reinitNacked();
sendDma(pkt, true);
} else if (pkt->senderState) {
DmaReqState *state;
DPRINTF(DMA, "Received response Pkt %#x with State: %#x Addr: %#x\n",
pkt, pkt->senderState, pkt->getAddr());
state = dynamic_cast<DmaReqState*>(pkt->senderState);
pendingCount--;
assert(pendingCount >= 0);
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
assert(state);
state->numBytes += pkt->req->getSize();
if (state->totBytes == state->numBytes) {
state->completionEvent->process();
delete state;
}
delete pkt->req;
delete pkt;
memory mode information now contained in system object States are now running, draining, or drained. memory state information moved into system object system parameter is not fs only for cpus Implement drain() support in devices Update for drain() call that returns number of times drain_event->process() will be called Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: Since se mode has a system, allow access to it Verify that the atomic cpu is connected to an atomic system on resume src/cpu/simple/base.cc: Since se mode has a system, allow access to it src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system Since se mode has a system, allow access to it Verify that the timing cpu is connected to an timing system on resume src/dev/ide_disk.cc: src/dev/io_device.cc: src/dev/io_device.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: src/dev/sinic.cc: src/dev/sinic.hh: Implement drain() support in devices src/python/m5/config.py: Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times src/python/m5/objects/BaseCPU.py: move system parameter out of fs to everyone src/sim/sim_object.cc: src/sim/sim_object.hh: States are now running, draining, or drained. memory state information moved into system object src/sim/system.cc: src/sim/system.hh: memory mode information now contained in system object --HG-- extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
2006-07-13 02:22:07 +02:00
if (pendingCount == 0 && drainEvent) {
drainEvent->process();
drainEvent = NULL;
}
} else {
panic("Got packet without sender state... huh?\n");
}
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
return true;
}
fixes for new memory system SConscript: comment out most devices add vport.cc arch/alpha/arguments.cc: arch/alpha/arguments.hh: push in alpha name space fix for new memory system arch/alpha/faults.cc: arch/alpha/faults.hh: Added an unimplemented fault that can be returned if a certain function isn't implemented arch/alpha/freebsd/system.cc: arch/alpha/linux/system.cc: arch/alpha/stacktrace.cc: arch/alpha/system.cc: arch/alpha/tlb.hh: arch/alpha/tru64/system.cc: fixed for new memory system arch/alpha/tlb.cc: fixed for new memory system removed code that seems to have no purpose arch/alpha/vtophys.cc: arch/alpha/vtophys.hh: fixed for new memory system put in namespace AlphaISA base/remote_gdb.cc: fix for new memory system cpu/cpu_exec_context.cc: cpu/cpu_exec_context.hh: cpu/exec_context.hh: create two ports one of physical accesses and one for superpage accesses Add functions getVirtPort() getPhysPort() delVirtPort(). To get statically allocated physical or virtual ports or if an execcontext is passed in get a dynamically allocated virtual port dev/alpha_console.cc: dev/alpha_console.hh: Redo for new memory system dev/io_device.cc: dev/io_device.hh: new I/O devices for new memory system kern/linux/events.cc: kern/linux/printk.cc: kern/linux/printk.hh: kern/tru64/dump_mbuf.hh: kern/tru64/printf.cc: kern/tru64/printf.hh: Arguments now in namespaces kern/tru64/tru64_events.cc: mem/bus.cc: fix for new memory syste mem/physical.hh: new addressranges function getPort should be public mem/port.hh: Add write/read methods to functional port update getDeviceAddrRanges to have a list of both snoops and response lists sim/pseudo_inst.cc: sim/system.cc: sim/system.hh: Update for new mem system sim/vptr.hh: comment out code and replace with panics This will need to be fixed at some point, but it's not easy. --HG-- extra : convert_revision : 41f41f422cfbab3751284d55cccb6ea64a7956e2
2006-04-06 06:51:46 +02:00
DmaDevice::DmaDevice(Params *p)
: PioDevice(p), dmaPort(NULL)
{ }
memory mode information now contained in system object States are now running, draining, or drained. memory state information moved into system object system parameter is not fs only for cpus Implement drain() support in devices Update for drain() call that returns number of times drain_event->process() will be called Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: Since se mode has a system, allow access to it Verify that the atomic cpu is connected to an atomic system on resume src/cpu/simple/base.cc: Since se mode has a system, allow access to it src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system Since se mode has a system, allow access to it Verify that the timing cpu is connected to an timing system on resume src/dev/ide_disk.cc: src/dev/io_device.cc: src/dev/io_device.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: src/dev/sinic.cc: src/dev/sinic.hh: Implement drain() support in devices src/python/m5/config.py: Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times src/python/m5/objects/BaseCPU.py: move system parameter out of fs to everyone src/sim/sim_object.cc: src/sim/sim_object.hh: States are now running, draining, or drained. memory state information moved into system object src/sim/system.cc: src/sim/system.hh: memory mode information now contained in system object --HG-- extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
2006-07-13 02:22:07 +02:00
unsigned int
DmaDevice::drain(Event *de)
{
unsigned int count;
count = pioPort->drain(de) + dmaPort->drain(de);
if (count)
changeState(Draining);
else
changeState(Drained);
return count;
}
unsigned int
DmaPort::drain(Event *de)
{
if (pendingCount == 0)
return 0;
drainEvent = de;
return 1;
}
void
DmaPort::recvRetry()
{
Packet* pkt = transmitList.front();
bool result = true;
while (result && transmitList.size()) {
DPRINTF(DMA, "Retry on Packet %#x with senderState: %#x\n",
pkt, pkt->senderState);
result = sendTiming(pkt);
if (result) {
DPRINTF(DMA, "-- Done\n");
transmitList.pop_front();
} else {
DPRINTF(DMA, "-- Failed, queued\n");
}
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
}
}
void
DmaPort::dmaAction(Packet::Command cmd, Addr addr, int size, Event *event,
uint8_t *data)
{
assert(event);
memory mode information now contained in system object States are now running, draining, or drained. memory state information moved into system object system parameter is not fs only for cpus Implement drain() support in devices Update for drain() call that returns number of times drain_event->process() will be called Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: Since se mode has a system, allow access to it Verify that the atomic cpu is connected to an atomic system on resume src/cpu/simple/base.cc: Since se mode has a system, allow access to it src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system Since se mode has a system, allow access to it Verify that the timing cpu is connected to an timing system on resume src/dev/ide_disk.cc: src/dev/io_device.cc: src/dev/io_device.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: src/dev/sinic.cc: src/dev/sinic.hh: Implement drain() support in devices src/python/m5/config.py: Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times src/python/m5/objects/BaseCPU.py: move system parameter out of fs to everyone src/sim/sim_object.cc: src/sim/sim_object.hh: States are now running, draining, or drained. memory state information moved into system object src/sim/system.cc: src/sim/system.hh: memory mode information now contained in system object --HG-- extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
2006-07-13 02:22:07 +02:00
assert(device->getState() == SimObject::Running);
DmaReqState *reqState = new DmaReqState(event, this, size);
for (ChunkGenerator gen(addr, size, peerBlockSize());
!gen.done(); gen.next()) {
Request *req = new Request(gen.addr(), gen.size(), 0);
Packet *pkt = new Packet(req, cmd, Packet::Broadcast);
// Increment the data pointer on a write
Mostly done with all device models for new memory system. Still need to get timing packets working and get sinic working after merge from head. Checkpointing may need some work now. Endian-happiness still not complete. SConscript: add all devices back into make file base/inet.hh: dev/etherbus.cc: dev/etherbus.hh: dev/etherdump.cc: dev/etherdump.hh: dev/etherint.hh: dev/etherlink.cc: dev/etherlink.hh: dev/etherpkt.cc: dev/etherpkt.hh: dev/ethertap.cc: dev/ethertap.hh: dev/pktfifo.cc: dev/pktfifo.hh: rename PacketPtr EthPacketPtr so it doesn't conflict with the PacketPtr type in the memory system configs/test/fs.py: add nics to fs.py cpu/cpu_exec_context.cc: remove this check, as it's not valid. We may want to add something else back in to make sure that no one can delete the static virtual ports in the exec context cpu/simple/cpu.cc: cpu/simple/cpu.hh: dev/alpha_console.cc: dev/ide_ctrl.cc: use new methods for accessing packet data dev/ide_disk.cc: add some more dprintfs dev/io_device.cc: delete packets when we are done with them. Update for new packet methods to access data dev/isa_fake.cc: dev/pciconfigall.cc: dev/tsunami_cchip.cc: dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart8250.cc: dev/uart8250.hh: mem/physical.cc: mem/port.cc: dUpdate for new packet methods to access data dev/ns_gige.cc: Update for new memory system dev/ns_gige.hh: python/m5/objects/Ethernet.py: update for new memory system dev/sinic.cc: dev/sinic.hh: Update for new memory system. Untested as need to merge in head because of kernel driver differences between versions mem/packet.hh: Add methods to access data instead of accessing it directly. --HG-- extra : convert_revision : 223f43876afd404e68337270cd9a5e44d0bf553e
2006-04-25 01:31:50 +02:00
if (data)
pkt->dataStatic(data + gen.complete());
pkt->senderState = reqState;
assert(pendingCount >= 0);
pendingCount++;
Mostly done with all device models for new memory system. Still need to get timing packets working and get sinic working after merge from head. Checkpointing may need some work now. Endian-happiness still not complete. SConscript: add all devices back into make file base/inet.hh: dev/etherbus.cc: dev/etherbus.hh: dev/etherdump.cc: dev/etherdump.hh: dev/etherint.hh: dev/etherlink.cc: dev/etherlink.hh: dev/etherpkt.cc: dev/etherpkt.hh: dev/ethertap.cc: dev/ethertap.hh: dev/pktfifo.cc: dev/pktfifo.hh: rename PacketPtr EthPacketPtr so it doesn't conflict with the PacketPtr type in the memory system configs/test/fs.py: add nics to fs.py cpu/cpu_exec_context.cc: remove this check, as it's not valid. We may want to add something else back in to make sure that no one can delete the static virtual ports in the exec context cpu/simple/cpu.cc: cpu/simple/cpu.hh: dev/alpha_console.cc: dev/ide_ctrl.cc: use new methods for accessing packet data dev/ide_disk.cc: add some more dprintfs dev/io_device.cc: delete packets when we are done with them. Update for new packet methods to access data dev/isa_fake.cc: dev/pciconfigall.cc: dev/tsunami_cchip.cc: dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart8250.cc: dev/uart8250.hh: mem/physical.cc: mem/port.cc: dUpdate for new packet methods to access data dev/ns_gige.cc: Update for new memory system dev/ns_gige.hh: python/m5/objects/Ethernet.py: update for new memory system dev/sinic.cc: dev/sinic.hh: Update for new memory system. Untested as need to merge in head because of kernel driver differences between versions mem/packet.hh: Add methods to access data instead of accessing it directly. --HG-- extra : convert_revision : 223f43876afd404e68337270cd9a5e44d0bf553e
2006-04-25 01:31:50 +02:00
sendDma(pkt);
}
memory mode information now contained in system object States are now running, draining, or drained. memory state information moved into system object system parameter is not fs only for cpus Implement drain() support in devices Update for drain() call that returns number of times drain_event->process() will be called Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: Since se mode has a system, allow access to it Verify that the atomic cpu is connected to an atomic system on resume src/cpu/simple/base.cc: Since se mode has a system, allow access to it src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system Since se mode has a system, allow access to it Verify that the timing cpu is connected to an timing system on resume src/dev/ide_disk.cc: src/dev/io_device.cc: src/dev/io_device.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: src/dev/sinic.cc: src/dev/sinic.hh: Implement drain() support in devices src/python/m5/config.py: Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times src/python/m5/objects/BaseCPU.py: move system parameter out of fs to everyone src/sim/sim_object.cc: src/sim/sim_object.hh: States are now running, draining, or drained. memory state information moved into system object src/sim/system.cc: src/sim/system.hh: memory mode information now contained in system object --HG-- extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
2006-07-13 02:22:07 +02:00
}
void
DmaPort::sendDma(Packet *pkt, bool front)
{
memory mode information now contained in system object States are now running, draining, or drained. memory state information moved into system object system parameter is not fs only for cpus Implement drain() support in devices Update for drain() call that returns number of times drain_event->process() will be called Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: Since se mode has a system, allow access to it Verify that the atomic cpu is connected to an atomic system on resume src/cpu/simple/base.cc: Since se mode has a system, allow access to it src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system Since se mode has a system, allow access to it Verify that the timing cpu is connected to an timing system on resume src/dev/ide_disk.cc: src/dev/io_device.cc: src/dev/io_device.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: src/dev/sinic.cc: src/dev/sinic.hh: Implement drain() support in devices src/python/m5/config.py: Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times src/python/m5/objects/BaseCPU.py: move system parameter out of fs to everyone src/sim/sim_object.cc: src/sim/sim_object.hh: States are now running, draining, or drained. memory state information moved into system object src/sim/system.cc: src/sim/system.hh: memory mode information now contained in system object --HG-- extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
2006-07-13 02:22:07 +02:00
// some kind of selction between access methods
// more work is going to have to be done to make
// switching actually work
memory mode information now contained in system object States are now running, draining, or drained. memory state information moved into system object system parameter is not fs only for cpus Implement drain() support in devices Update for drain() call that returns number of times drain_event->process() will be called Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: Since se mode has a system, allow access to it Verify that the atomic cpu is connected to an atomic system on resume src/cpu/simple/base.cc: Since se mode has a system, allow access to it src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system Since se mode has a system, allow access to it Verify that the timing cpu is connected to an timing system on resume src/dev/ide_disk.cc: src/dev/io_device.cc: src/dev/io_device.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: src/dev/sinic.cc: src/dev/sinic.hh: Implement drain() support in devices src/python/m5/config.py: Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times src/python/m5/objects/BaseCPU.py: move system parameter out of fs to everyone src/sim/sim_object.cc: src/sim/sim_object.hh: States are now running, draining, or drained. memory state information moved into system object src/sim/system.cc: src/sim/system.hh: memory mode information now contained in system object --HG-- extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
2006-07-13 02:22:07 +02:00
System::MemoryMode state = sys->getMemoryMode();
if (state == System::Timing) {
DPRINTF(DMA, "Attempting to send Packet %#x with addr: %#x\n",
pkt, pkt->getAddr());
if (transmitList.size() || !sendTiming(pkt)) {
if (front)
transmitList.push_front(pkt);
else
transmitList.push_back(pkt);
DPRINTF(DMA, "-- Failed: queued\n");
} else {
DPRINTF(DMA, "-- Done\n");
}
} else if (state == System::Atomic) {
Tick lat;
lat = sendAtomic(pkt);
memory mode information now contained in system object States are now running, draining, or drained. memory state information moved into system object system parameter is not fs only for cpus Implement drain() support in devices Update for drain() call that returns number of times drain_event->process() will be called Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: Since se mode has a system, allow access to it Verify that the atomic cpu is connected to an atomic system on resume src/cpu/simple/base.cc: Since se mode has a system, allow access to it src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system Since se mode has a system, allow access to it Verify that the timing cpu is connected to an timing system on resume src/dev/ide_disk.cc: src/dev/io_device.cc: src/dev/io_device.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: src/dev/sinic.cc: src/dev/sinic.hh: Implement drain() support in devices src/python/m5/config.py: Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times src/python/m5/objects/BaseCPU.py: move system parameter out of fs to everyone src/sim/sim_object.cc: src/sim/sim_object.hh: States are now running, draining, or drained. memory state information moved into system object src/sim/system.cc: src/sim/system.hh: memory mode information now contained in system object --HG-- extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
2006-07-13 02:22:07 +02:00
assert(pkt->senderState);
DmaReqState *state = dynamic_cast<DmaReqState*>(pkt->senderState);
assert(state);
state->numBytes += pkt->req->getSize();
if (state->totBytes == state->numBytes) {
state->completionEvent->schedule(curTick + lat);
memory mode information now contained in system object States are now running, draining, or drained. memory state information moved into system object system parameter is not fs only for cpus Implement drain() support in devices Update for drain() call that returns number of times drain_event->process() will be called Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: Since se mode has a system, allow access to it Verify that the atomic cpu is connected to an atomic system on resume src/cpu/simple/base.cc: Since se mode has a system, allow access to it src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system Since se mode has a system, allow access to it Verify that the timing cpu is connected to an timing system on resume src/dev/ide_disk.cc: src/dev/io_device.cc: src/dev/io_device.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: src/dev/sinic.cc: src/dev/sinic.hh: Implement drain() support in devices src/python/m5/config.py: Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times src/python/m5/objects/BaseCPU.py: move system parameter out of fs to everyone src/sim/sim_object.cc: src/sim/sim_object.hh: States are now running, draining, or drained. memory state information moved into system object src/sim/system.cc: src/sim/system.hh: memory mode information now contained in system object --HG-- extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
2006-07-13 02:22:07 +02:00
delete state;
delete pkt->req;
}
pendingCount--;
assert(pendingCount >= 0);
delete pkt;
if (pendingCount == 0 && drainEvent) {
drainEvent->process();
drainEvent = NULL;
}
} else
panic("Unknown memory command state.");
}
DmaDevice::~DmaDevice()
{
if (dmaPort)
delete dmaPort;
}