gem5/dev/io_device.cc

208 lines
5.1 KiB
C++
Raw Normal View History

/*
* Copyright (c) 2006 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "dev/io_device.hh"
#include "sim/builder.hh"
PioPort::PioPort(PioDevice *dev, Platform *p)
: device(dev), platform(p)
{ }
Tick
PioPort::recvAtomic(Packet &pkt)
{
return device->recvAtomic(pkt);
}
void
PioPort::recvFunctional(Packet &pkt)
{
device->recvAtomic(pkt);
}
void
PioPort::getDeviceAddressRanges(AddrRangeList &range_list, bool &owner)
{
device->addressRanges(range_list, owner);
}
Packet *
PioPort::recvRetry()
{
Packet* pkt = transmitList.front();
transmitList.pop_front();
return pkt;
}
void
PioPort::SendEvent::process()
{
if (port->Port::sendTiming(packet) == Success)
return;
port->transmitList.push_back(&packet);
}
bool
PioPort::recvTiming(Packet &pkt)
{
device->recvAtomic(pkt);
sendTiming(pkt, pkt.time-pkt.req->time);
return Success;
}
PioDevice::~PioDevice()
{
if (pioPort)
delete pioPort;
}
DmaPort::DmaPort(DmaDevice *dev)
: device(dev)
{ }
bool
DmaPort::recvTiming(Packet &pkt)
{
completionEvent->schedule(curTick+1);
completionEvent = NULL;
return Success;
}
New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
2005-01-15 10:12:25 +01:00
DmaDevice::DmaDevice(const std::string &name, Platform *p)
: PioDevice(name, p)
{
dmaPort = new DmaPort(this);
}
void
DmaPort::SendEvent::process()
{
if (port->Port::sendTiming(packet) == Success)
return;
port->transmitList.push_back(&packet);
}
Packet *
DmaPort::recvRetry()
{
Packet* pkt = transmitList.front();
transmitList.pop_front();
return pkt;
}
void
DmaPort::dmaAction(Command cmd, DmaPort port, Addr addr, int size,
Event *event, uint8_t *data)
{
assert(event);
int prevSize = 0;
Packet basePkt;
Request baseReq;
basePkt.flags = 0;
basePkt.coherence = NULL;
basePkt.senderState = NULL;
basePkt.src = 0;
basePkt.dest = 0;
basePkt.cmd = cmd;
basePkt.result = Unknown;
basePkt.req = NULL;
baseReq.nicReq = true;
baseReq.time = curTick;
completionEvent = event;
for (ChunkGenerator gen(addr, size, peerBlockSize());
!gen.done(); gen.next()) {
Packet *pkt = new Packet(basePkt);
Request *req = new Request(baseReq);
pkt->addr = gen.addr();
pkt->size = gen.size();
pkt->req = req;
pkt->req->paddr = pkt->addr;
pkt->req->size = pkt->size;
// Increment the data pointer on a write
pkt->data = data ? data + prevSize : NULL ;
prevSize += pkt->size;
sendDma(*pkt);
}
}
void
DmaPort::sendDma(Packet &pkt)
{
// some kind of selction between access methods
// more work is going to have to be done to make
// switching actually work
/* MemState state = device->platform->system->memState;
if (state == Timing) {
if (sendTiming(pkt) == Failure)
transmitList.push_back(&packet);
} else if (state == Atomic) {*/
sendAtomic(pkt);
completionEvent->schedule(pkt.time - pkt.req->time);
completionEvent = NULL;
/* } else if (state == Functional) {
sendFunctional(pkt);
// Is this correct???
completionEvent->schedule(pkt.req->responseTime - pkt.req->requestTime);
completionEvent == NULL;
} else
panic("Unknown memory command state.");
*/
}
DmaDevice::~DmaDevice()
{
if (dmaPort)
delete dmaPort;
}
void
BasePioDevice::addressRanges(AddrRangeList &range_list, bool &owner)
{
assert(pioSize != 0);
owner = true;
range_list.clear();
range_list.push_back(RangeSize(pio_addr, sizeof(struct alphaAccess)));
}