gem5/dev/tsunami_io.cc

718 lines
20 KiB
C++
Raw Normal View History

/*
* Copyright (c) 2004-2005 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** @file
* Tsunami I/O including PIC, PIT, RTC, DMA
*/
#include <sys/time.h>
#include <deque>
#include <string>
#include <vector>
#include "base/trace.hh"
#include "dev/tsunami_io.hh"
#include "dev/tsunami.hh"
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
#include "dev/pitreg.h"
#include "mem/bus/bus.hh"
#include "mem/bus/pio_interface.hh"
#include "mem/bus/pio_interface_impl.hh"
#include "sim/builder.hh"
#include "dev/tsunami_cchip.hh"
#include "dev/tsunamireg.h"
#include "dev/rtcreg.h"
shuffle files around for new directory structure --HG-- rename : cpu/base_cpu.cc => cpu/base.cc rename : cpu/base_cpu.hh => cpu/base.hh rename : cpu/beta_cpu/2bit_local_pred.cc => cpu/o3/2bit_local_pred.cc rename : cpu/beta_cpu/2bit_local_pred.hh => cpu/o3/2bit_local_pred.hh rename : cpu/beta_cpu/alpha_full_cpu.cc => cpu/o3/alpha_cpu.cc rename : cpu/beta_cpu/alpha_full_cpu.hh => cpu/o3/alpha_cpu.hh rename : cpu/beta_cpu/alpha_full_cpu_builder.cc => cpu/o3/alpha_cpu_builder.cc rename : cpu/beta_cpu/alpha_full_cpu_impl.hh => cpu/o3/alpha_cpu_impl.hh rename : cpu/beta_cpu/alpha_dyn_inst.cc => cpu/o3/alpha_dyn_inst.cc rename : cpu/beta_cpu/alpha_dyn_inst.hh => cpu/o3/alpha_dyn_inst.hh rename : cpu/beta_cpu/alpha_dyn_inst_impl.hh => cpu/o3/alpha_dyn_inst_impl.hh rename : cpu/beta_cpu/alpha_impl.hh => cpu/o3/alpha_impl.hh rename : cpu/beta_cpu/alpha_params.hh => cpu/o3/alpha_params.hh rename : cpu/beta_cpu/bpred_unit.cc => cpu/o3/bpred_unit.cc rename : cpu/beta_cpu/bpred_unit.hh => cpu/o3/bpred_unit.hh rename : cpu/beta_cpu/bpred_unit_impl.hh => cpu/o3/bpred_unit_impl.hh rename : cpu/beta_cpu/btb.cc => cpu/o3/btb.cc rename : cpu/beta_cpu/btb.hh => cpu/o3/btb.hh rename : cpu/beta_cpu/comm.hh => cpu/o3/comm.hh rename : cpu/beta_cpu/commit.cc => cpu/o3/commit.cc rename : cpu/beta_cpu/commit.hh => cpu/o3/commit.hh rename : cpu/beta_cpu/commit_impl.hh => cpu/o3/commit_impl.hh rename : cpu/beta_cpu/full_cpu.cc => cpu/o3/cpu.cc rename : cpu/beta_cpu/full_cpu.hh => cpu/o3/cpu.hh rename : cpu/beta_cpu/cpu_policy.hh => cpu/o3/cpu_policy.hh rename : cpu/beta_cpu/decode.cc => cpu/o3/decode.cc rename : cpu/beta_cpu/decode.hh => cpu/o3/decode.hh rename : cpu/beta_cpu/decode_impl.hh => cpu/o3/decode_impl.hh rename : cpu/beta_cpu/fetch.cc => cpu/o3/fetch.cc rename : cpu/beta_cpu/fetch.hh => cpu/o3/fetch.hh rename : cpu/beta_cpu/fetch_impl.hh => cpu/o3/fetch_impl.hh rename : cpu/beta_cpu/free_list.cc => cpu/o3/free_list.cc rename : cpu/beta_cpu/free_list.hh => cpu/o3/free_list.hh rename : cpu/beta_cpu/iew.cc => cpu/o3/iew.cc rename : cpu/beta_cpu/iew.hh => cpu/o3/iew.hh rename : cpu/beta_cpu/iew_impl.hh => cpu/o3/iew_impl.hh rename : cpu/beta_cpu/inst_queue.cc => cpu/o3/inst_queue.cc rename : cpu/beta_cpu/inst_queue.hh => cpu/o3/inst_queue.hh rename : cpu/beta_cpu/inst_queue_impl.hh => cpu/o3/inst_queue_impl.hh rename : cpu/beta_cpu/mem_dep_unit.cc => cpu/o3/mem_dep_unit.cc rename : cpu/beta_cpu/mem_dep_unit.hh => cpu/o3/mem_dep_unit.hh rename : cpu/beta_cpu/mem_dep_unit_impl.hh => cpu/o3/mem_dep_unit_impl.hh rename : cpu/beta_cpu/ras.cc => cpu/o3/ras.cc rename : cpu/beta_cpu/ras.hh => cpu/o3/ras.hh rename : cpu/beta_cpu/regfile.hh => cpu/o3/regfile.hh rename : cpu/beta_cpu/rename.cc => cpu/o3/rename.cc rename : cpu/beta_cpu/rename.hh => cpu/o3/rename.hh rename : cpu/beta_cpu/rename_impl.hh => cpu/o3/rename_impl.hh rename : cpu/beta_cpu/rename_map.cc => cpu/o3/rename_map.cc rename : cpu/beta_cpu/rename_map.hh => cpu/o3/rename_map.hh rename : cpu/beta_cpu/rob.cc => cpu/o3/rob.cc rename : cpu/beta_cpu/rob.hh => cpu/o3/rob.hh rename : cpu/beta_cpu/rob_impl.hh => cpu/o3/rob_impl.hh rename : cpu/beta_cpu/sat_counter.cc => cpu/o3/sat_counter.cc rename : cpu/beta_cpu/sat_counter.hh => cpu/o3/sat_counter.hh rename : cpu/beta_cpu/store_set.cc => cpu/o3/store_set.cc rename : cpu/beta_cpu/store_set.hh => cpu/o3/store_set.hh rename : cpu/beta_cpu/tournament_pred.cc => cpu/o3/tournament_pred.cc rename : cpu/beta_cpu/tournament_pred.hh => cpu/o3/tournament_pred.hh rename : cpu/ooo_cpu/ooo_cpu.cc => cpu/ozone/cpu.cc rename : cpu/ooo_cpu/ooo_cpu.hh => cpu/ozone/cpu.hh rename : cpu/ooo_cpu/ooo_impl.hh => cpu/ozone/cpu_impl.hh rename : cpu/ooo_cpu/ea_list.cc => cpu/ozone/ea_list.cc rename : cpu/ooo_cpu/ea_list.hh => cpu/ozone/ea_list.hh rename : cpu/simple_cpu/simple_cpu.cc => cpu/simple/cpu.cc rename : cpu/simple_cpu/simple_cpu.hh => cpu/simple/cpu.hh rename : cpu/full_cpu/smt.hh => cpu/smt.hh rename : cpu/full_cpu/op_class.hh => encumbered/cpu/full/op_class.hh extra : convert_revision : c4a891d8d6d3e0e9e5ea56be47d851da44d8c032
2005-06-05 02:50:10 +02:00
#include "mem/functional/memory_control.hh"
using namespace std;
TsunamiIO::RTC::RTC(const string &name, Tsunami* t, Tick i)
: _name(name), event(t, i), addr(0)
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
{
memset(clock_data, 0, sizeof(clock_data));
stat_regA = RTCA_32768HZ | RTCA_1024HZ;
stat_regB = RTCB_PRDC_IE |RTCB_BIN | RTCB_24HR;
}
void
TsunamiIO::RTC::set_time(time_t t)
{
struct tm tm;
gmtime_r(&t, &tm);
sec = tm.tm_sec;
min = tm.tm_min;
hour = tm.tm_hour;
wday = tm.tm_wday + 1;
mday = tm.tm_mday;
mon = tm.tm_mon + 1;
year = tm.tm_year;
DPRINTFN("Real-time clock set to %s", asctime(&tm));
}
void
TsunamiIO::RTC::writeAddr(const uint8_t *data)
{
if (*data <= RTC_STAT_REGD)
addr = *data;
else
panic("RTC addresses over 0xD are not implemented.\n");
}
void
TsunamiIO::RTC::writeData(const uint8_t *data)
{
if (addr < RTC_STAT_REGA)
clock_data[addr] = *data;
else {
switch (addr) {
case RTC_STAT_REGA:
if (*data != (RTCA_32768HZ | RTCA_1024HZ))
panic("Unimplemented RTC register A value write!\n");
stat_regA = *data;
break;
case RTC_STAT_REGB:
if ((*data & ~(RTCB_PRDC_IE | RTCB_SQWE)) != (RTCB_BIN | RTCB_24HR))
panic("Write to RTC reg B bits that are not implemented!\n");
if (*data & RTCB_PRDC_IE) {
if (!event.scheduled())
event.scheduleIntr();
} else {
if (event.scheduled())
event.deschedule();
}
stat_regB = *data;
break;
case RTC_STAT_REGC:
case RTC_STAT_REGD:
panic("RTC status registers C and D are not implemented.\n");
break;
}
}
}
void
TsunamiIO::RTC::readData(uint8_t *data)
{
if (addr < RTC_STAT_REGA)
*data = clock_data[addr];
else {
switch (addr) {
case RTC_STAT_REGA:
// toggle UIP bit for linux
stat_regA ^= RTCA_UIP;
*data = stat_regA;
break;
case RTC_STAT_REGB:
*data = stat_regB;
break;
case RTC_STAT_REGC:
case RTC_STAT_REGD:
*data = 0x00;
break;
}
}
}
void
TsunamiIO::RTC::serialize(const string &base, ostream &os)
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
{
paramOut(os, base + ".addr", addr);
arrayParamOut(os, base + ".clock_data", clock_data, sizeof(clock_data));
paramOut(os, base + ".stat_regA", stat_regA);
paramOut(os, base + ".stat_regB", stat_regB);
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
}
void
TsunamiIO::RTC::unserialize(const string &base, Checkpoint *cp,
const string &section)
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
{
paramIn(cp, section, base + ".addr", addr);
arrayParamIn(cp, section, base + ".clock_data", clock_data,
sizeof(clock_data));
paramIn(cp, section, base + ".stat_regA", stat_regA);
paramIn(cp, section, base + ".stat_regB", stat_regB);
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
// We're not unserializing the event here, but we need to
// rescehedule the event since curTick was moved forward by the
// checkpoint
event.reschedule(curTick + event.interval);
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
}
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
TsunamiIO::RTC::RTCEvent::RTCEvent(Tsunami*t, Tick i)
Make the notion of a global event tick independent of the actual CPU cycle ticks. This allows the user to have CPUs of different frequencies, and also allows frequencies and latencies that are not evenly divisible by the CPU frequency. For now, the CPU frequency is still set to the global frequency, but soon, we'll hopefully make the global frequency fixed at something like 1THz and set all other frequencies independently. arch/alpha/ev5.cc: The cycles counter is based on the current cpu cycle. cpu/base_cpu.cc: frequency isn't the cpu parameter anymore, cycleTime is. cpu/base_cpu.hh: frequency isn't the cpu parameter anymore, cycleTime is. create several public functions for getting the cpu frequency and the numbers of ticks for a given number of cycles, etc. cpu/memtest/memtest.cc: cpu/simple_cpu/simple_cpu.cc: cpu/simple_cpu/simple_cpu.hh: cpu/trace/trace_cpu.cc: Now that ticks aren't cpu cycles, fixup code to advance by the proper number of ticks. cpu/memtest/memtest.hh: cpu/trace/trace_cpu.hh: Provide a function to get the number of ticks for a given number of cycles. dev/alpha_console.cc: Update for changes in the way that frequencies and latencies are accessed. Move some stuff to init() dev/alpha_console.hh: Need a pointer to the system and the cpu to get the frequency so we can pass the info to the console code. dev/etherbus.cc: dev/etherbus.hh: dev/etherlink.cc: dev/etherlink.hh: dev/ethertap.cc: dev/ide_disk.hh: dev/ns_gige.cc: dev/ns_gige.hh: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. dev/ide_disk.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. Add some extra debugging printfs dev/platform.cc: dev/sinic.cc: dev/sinic.hh: outline the constructor and destructor dev/platform.hh: outline the constructor and destructor. don't keep track of the interrupt frequency. Only provide the accessor function. dev/tsunami.cc: dev/tsunami.hh: outline the constructor and destructor Don't set the interrupt frequency here. Get it from the actual device that does the interrupting. dev/tsunami_io.cc: dev/tsunami_io.hh: Make the interrupt interval a configuration parameter. (And convert the interval to the new latency/frequency stuff in the python) kern/linux/linux_system.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. kern/tru64/tru64_system.cc: For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. python/m5/config.py: Fix support for cycle_time relative latencies and frequencies. Add support for getting a NetworkBandwidth or a MemoryBandwidth. python/m5/objects/BaseCPU.mpy: All CPUs now have a cycle_time. The default is the global frequency, but it is now possible to set the global frequency to some large value (like 1THz) and set each CPU frequency independently. python/m5/objects/BaseCache.mpy: python/m5/objects/Ide.mpy: Make this a Latency parameter python/m5/objects/BaseSystem.mpy: We need to pass the boot CPU's frequency to the system python/m5/objects/Ethernet.mpy: Update parameter types to use latency and bandwidth types python/m5/objects/Platform.mpy: this frequency isn't needed. We get it from the clock interrupt. python/m5/objects/Tsunami.mpy: The clock generator should hold the frequency sim/eventq.hh: Need to remove this assertion because the writeback event queue is different from the CPU's event queue which can cause this assertion to fail. sim/process.cc: Fix comment. sim/system.hh: Struct member to hold the boot CPU's frequency. sim/universe.cc: remove unneeded variable. --HG-- extra : convert_revision : 51efe4041095234bf458d9b3b0d417f4cae16fdc
2005-04-11 21:32:06 +02:00
: Event(&mainEventQueue), tsunami(t), interval(i)
{
DPRINTF(MC146818, "RTC Event Initilizing\n");
Make the notion of a global event tick independent of the actual CPU cycle ticks. This allows the user to have CPUs of different frequencies, and also allows frequencies and latencies that are not evenly divisible by the CPU frequency. For now, the CPU frequency is still set to the global frequency, but soon, we'll hopefully make the global frequency fixed at something like 1THz and set all other frequencies independently. arch/alpha/ev5.cc: The cycles counter is based on the current cpu cycle. cpu/base_cpu.cc: frequency isn't the cpu parameter anymore, cycleTime is. cpu/base_cpu.hh: frequency isn't the cpu parameter anymore, cycleTime is. create several public functions for getting the cpu frequency and the numbers of ticks for a given number of cycles, etc. cpu/memtest/memtest.cc: cpu/simple_cpu/simple_cpu.cc: cpu/simple_cpu/simple_cpu.hh: cpu/trace/trace_cpu.cc: Now that ticks aren't cpu cycles, fixup code to advance by the proper number of ticks. cpu/memtest/memtest.hh: cpu/trace/trace_cpu.hh: Provide a function to get the number of ticks for a given number of cycles. dev/alpha_console.cc: Update for changes in the way that frequencies and latencies are accessed. Move some stuff to init() dev/alpha_console.hh: Need a pointer to the system and the cpu to get the frequency so we can pass the info to the console code. dev/etherbus.cc: dev/etherbus.hh: dev/etherlink.cc: dev/etherlink.hh: dev/ethertap.cc: dev/ide_disk.hh: dev/ns_gige.cc: dev/ns_gige.hh: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. dev/ide_disk.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. Add some extra debugging printfs dev/platform.cc: dev/sinic.cc: dev/sinic.hh: outline the constructor and destructor dev/platform.hh: outline the constructor and destructor. don't keep track of the interrupt frequency. Only provide the accessor function. dev/tsunami.cc: dev/tsunami.hh: outline the constructor and destructor Don't set the interrupt frequency here. Get it from the actual device that does the interrupting. dev/tsunami_io.cc: dev/tsunami_io.hh: Make the interrupt interval a configuration parameter. (And convert the interval to the new latency/frequency stuff in the python) kern/linux/linux_system.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. kern/tru64/tru64_system.cc: For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. python/m5/config.py: Fix support for cycle_time relative latencies and frequencies. Add support for getting a NetworkBandwidth or a MemoryBandwidth. python/m5/objects/BaseCPU.mpy: All CPUs now have a cycle_time. The default is the global frequency, but it is now possible to set the global frequency to some large value (like 1THz) and set each CPU frequency independently. python/m5/objects/BaseCache.mpy: python/m5/objects/Ide.mpy: Make this a Latency parameter python/m5/objects/BaseSystem.mpy: We need to pass the boot CPU's frequency to the system python/m5/objects/Ethernet.mpy: Update parameter types to use latency and bandwidth types python/m5/objects/Platform.mpy: this frequency isn't needed. We get it from the clock interrupt. python/m5/objects/Tsunami.mpy: The clock generator should hold the frequency sim/eventq.hh: Need to remove this assertion because the writeback event queue is different from the CPU's event queue which can cause this assertion to fail. sim/process.cc: Fix comment. sim/system.hh: Struct member to hold the boot CPU's frequency. sim/universe.cc: remove unneeded variable. --HG-- extra : convert_revision : 51efe4041095234bf458d9b3b0d417f4cae16fdc
2005-04-11 21:32:06 +02:00
schedule(curTick + interval);
}
void
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
TsunamiIO::RTC::RTCEvent::scheduleIntr()
{
schedule(curTick + interval);
}
void
TsunamiIO::RTC::RTCEvent::process()
{
DPRINTF(MC146818, "RTC Timer Interrupt\n");
Make the notion of a global event tick independent of the actual CPU cycle ticks. This allows the user to have CPUs of different frequencies, and also allows frequencies and latencies that are not evenly divisible by the CPU frequency. For now, the CPU frequency is still set to the global frequency, but soon, we'll hopefully make the global frequency fixed at something like 1THz and set all other frequencies independently. arch/alpha/ev5.cc: The cycles counter is based on the current cpu cycle. cpu/base_cpu.cc: frequency isn't the cpu parameter anymore, cycleTime is. cpu/base_cpu.hh: frequency isn't the cpu parameter anymore, cycleTime is. create several public functions for getting the cpu frequency and the numbers of ticks for a given number of cycles, etc. cpu/memtest/memtest.cc: cpu/simple_cpu/simple_cpu.cc: cpu/simple_cpu/simple_cpu.hh: cpu/trace/trace_cpu.cc: Now that ticks aren't cpu cycles, fixup code to advance by the proper number of ticks. cpu/memtest/memtest.hh: cpu/trace/trace_cpu.hh: Provide a function to get the number of ticks for a given number of cycles. dev/alpha_console.cc: Update for changes in the way that frequencies and latencies are accessed. Move some stuff to init() dev/alpha_console.hh: Need a pointer to the system and the cpu to get the frequency so we can pass the info to the console code. dev/etherbus.cc: dev/etherbus.hh: dev/etherlink.cc: dev/etherlink.hh: dev/ethertap.cc: dev/ide_disk.hh: dev/ns_gige.cc: dev/ns_gige.hh: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. dev/ide_disk.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. Add some extra debugging printfs dev/platform.cc: dev/sinic.cc: dev/sinic.hh: outline the constructor and destructor dev/platform.hh: outline the constructor and destructor. don't keep track of the interrupt frequency. Only provide the accessor function. dev/tsunami.cc: dev/tsunami.hh: outline the constructor and destructor Don't set the interrupt frequency here. Get it from the actual device that does the interrupting. dev/tsunami_io.cc: dev/tsunami_io.hh: Make the interrupt interval a configuration parameter. (And convert the interval to the new latency/frequency stuff in the python) kern/linux/linux_system.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. kern/tru64/tru64_system.cc: For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. python/m5/config.py: Fix support for cycle_time relative latencies and frequencies. Add support for getting a NetworkBandwidth or a MemoryBandwidth. python/m5/objects/BaseCPU.mpy: All CPUs now have a cycle_time. The default is the global frequency, but it is now possible to set the global frequency to some large value (like 1THz) and set each CPU frequency independently. python/m5/objects/BaseCache.mpy: python/m5/objects/Ide.mpy: Make this a Latency parameter python/m5/objects/BaseSystem.mpy: We need to pass the boot CPU's frequency to the system python/m5/objects/Ethernet.mpy: Update parameter types to use latency and bandwidth types python/m5/objects/Platform.mpy: this frequency isn't needed. We get it from the clock interrupt. python/m5/objects/Tsunami.mpy: The clock generator should hold the frequency sim/eventq.hh: Need to remove this assertion because the writeback event queue is different from the CPU's event queue which can cause this assertion to fail. sim/process.cc: Fix comment. sim/system.hh: Struct member to hold the boot CPU's frequency. sim/universe.cc: remove unneeded variable. --HG-- extra : convert_revision : 51efe4041095234bf458d9b3b0d417f4cae16fdc
2005-04-11 21:32:06 +02:00
schedule(curTick + interval);
//Actually interrupt the processor here
tsunami->cchip->postRTC();
}
const char *
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
TsunamiIO::RTC::RTCEvent::description()
{
Make the notion of a global event tick independent of the actual CPU cycle ticks. This allows the user to have CPUs of different frequencies, and also allows frequencies and latencies that are not evenly divisible by the CPU frequency. For now, the CPU frequency is still set to the global frequency, but soon, we'll hopefully make the global frequency fixed at something like 1THz and set all other frequencies independently. arch/alpha/ev5.cc: The cycles counter is based on the current cpu cycle. cpu/base_cpu.cc: frequency isn't the cpu parameter anymore, cycleTime is. cpu/base_cpu.hh: frequency isn't the cpu parameter anymore, cycleTime is. create several public functions for getting the cpu frequency and the numbers of ticks for a given number of cycles, etc. cpu/memtest/memtest.cc: cpu/simple_cpu/simple_cpu.cc: cpu/simple_cpu/simple_cpu.hh: cpu/trace/trace_cpu.cc: Now that ticks aren't cpu cycles, fixup code to advance by the proper number of ticks. cpu/memtest/memtest.hh: cpu/trace/trace_cpu.hh: Provide a function to get the number of ticks for a given number of cycles. dev/alpha_console.cc: Update for changes in the way that frequencies and latencies are accessed. Move some stuff to init() dev/alpha_console.hh: Need a pointer to the system and the cpu to get the frequency so we can pass the info to the console code. dev/etherbus.cc: dev/etherbus.hh: dev/etherlink.cc: dev/etherlink.hh: dev/ethertap.cc: dev/ide_disk.hh: dev/ns_gige.cc: dev/ns_gige.hh: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. dev/ide_disk.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. Add some extra debugging printfs dev/platform.cc: dev/sinic.cc: dev/sinic.hh: outline the constructor and destructor dev/platform.hh: outline the constructor and destructor. don't keep track of the interrupt frequency. Only provide the accessor function. dev/tsunami.cc: dev/tsunami.hh: outline the constructor and destructor Don't set the interrupt frequency here. Get it from the actual device that does the interrupting. dev/tsunami_io.cc: dev/tsunami_io.hh: Make the interrupt interval a configuration parameter. (And convert the interval to the new latency/frequency stuff in the python) kern/linux/linux_system.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. kern/tru64/tru64_system.cc: For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. python/m5/config.py: Fix support for cycle_time relative latencies and frequencies. Add support for getting a NetworkBandwidth or a MemoryBandwidth. python/m5/objects/BaseCPU.mpy: All CPUs now have a cycle_time. The default is the global frequency, but it is now possible to set the global frequency to some large value (like 1THz) and set each CPU frequency independently. python/m5/objects/BaseCache.mpy: python/m5/objects/Ide.mpy: Make this a Latency parameter python/m5/objects/BaseSystem.mpy: We need to pass the boot CPU's frequency to the system python/m5/objects/Ethernet.mpy: Update parameter types to use latency and bandwidth types python/m5/objects/Platform.mpy: this frequency isn't needed. We get it from the clock interrupt. python/m5/objects/Tsunami.mpy: The clock generator should hold the frequency sim/eventq.hh: Need to remove this assertion because the writeback event queue is different from the CPU's event queue which can cause this assertion to fail. sim/process.cc: Fix comment. sim/system.hh: Struct member to hold the boot CPU's frequency. sim/universe.cc: remove unneeded variable. --HG-- extra : convert_revision : 51efe4041095234bf458d9b3b0d417f4cae16fdc
2005-04-11 21:32:06 +02:00
return "tsunami RTC interrupt";
}
TsunamiIO::PITimer::PITimer(const string &name)
: _name(name), counter0(name + ".counter0"), counter1(name + ".counter1"),
counter2(name + ".counter2")
{
counter[0] = &counter0;
counter[1] = &counter0;
counter[2] = &counter0;
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
}
void
TsunamiIO::PITimer::writeControl(const uint8_t *data)
{
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
int rw;
int sel;
sel = GET_CTRL_SEL(*data);
if (sel == PIT_READ_BACK)
panic("PITimer Read-Back Command is not implemented.\n");
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
rw = GET_CTRL_RW(*data);
if (rw == PIT_RW_LATCH_COMMAND)
counter[sel]->latchCount();
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
else {
counter[sel]->setRW(rw);
counter[sel]->setMode(GET_CTRL_MODE(*data));
counter[sel]->setBCD(GET_CTRL_BCD(*data));
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
}
}
void
TsunamiIO::PITimer::serialize(const string &base, ostream &os)
{
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
// serialize the counters
counter0.serialize(base + ".counter0", os);
counter1.serialize(base + ".counter1", os);
counter2.serialize(base + ".counter2", os);
}
void
TsunamiIO::PITimer::unserialize(const string &base, Checkpoint *cp,
const string &section)
{
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
// unserialze the counters
counter0.unserialize(base + ".counter0", cp, section);
counter1.unserialize(base + ".counter1", cp, section);
counter2.unserialize(base + ".counter2", cp, section);
}
TsunamiIO::PITimer::Counter::Counter(const string &name)
: _name(name), event(this), count(0), latched_count(0), period(0),
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
mode(0), output_high(false), latch_on(false), read_byte(LSB),
write_byte(LSB)
{
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
}
void
TsunamiIO::PITimer::Counter::latchCount()
{
// behave like a real latch
if(!latch_on) {
latch_on = true;
read_byte = LSB;
latched_count = count;
}
}
void
TsunamiIO::PITimer::Counter::read(uint8_t *data)
{
if (latch_on) {
switch (read_byte) {
case LSB:
read_byte = MSB;
*data = (uint8_t)latched_count;
break;
case MSB:
read_byte = LSB;
latch_on = false;
*data = latched_count >> 8;
break;
}
} else {
switch (read_byte) {
case LSB:
read_byte = MSB;
*data = (uint8_t)count;
break;
case MSB:
read_byte = LSB;
*data = count >> 8;
break;
}
}
}
void
TsunamiIO::PITimer::Counter::write(const uint8_t *data)
{
switch (write_byte) {
case LSB:
count = (count & 0xFF00) | *data;
if (event.scheduled())
event.deschedule();
output_high = false;
write_byte = MSB;
break;
case MSB:
count = (count & 0x00FF) | (*data << 8);
period = count;
if (period > 0) {
DPRINTF(Tsunami, "Timer set to curTick + %d\n",
count * event.interval);
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
event.schedule(curTick + count * event.interval);
}
write_byte = LSB;
break;
}
}
void
TsunamiIO::PITimer::Counter::setRW(int rw_val)
{
if (rw_val != PIT_RW_16BIT)
panic("Only LSB/MSB read/write is implemented.\n");
}
void
TsunamiIO::PITimer::Counter::setMode(int mode_val)
{
if(mode_val != PIT_MODE_INTTC && mode_val != PIT_MODE_RATEGEN &&
mode_val != PIT_MODE_SQWAVE)
panic("PIT mode %#x is not implemented: \n", mode_val);
mode = mode_val;
}
void
TsunamiIO::PITimer::Counter::setBCD(int bcd_val)
{
if (bcd_val != PIT_BCD_FALSE)
panic("PITimer does not implement BCD counts.\n");
}
bool
TsunamiIO::PITimer::Counter::outputHigh()
{
return output_high;
}
void
TsunamiIO::PITimer::Counter::serialize(const string &base, ostream &os)
{
paramOut(os, base + ".count", count);
paramOut(os, base + ".latched_count", latched_count);
paramOut(os, base + ".period", period);
paramOut(os, base + ".mode", mode);
paramOut(os, base + ".output_high", output_high);
paramOut(os, base + ".latch_on", latch_on);
paramOut(os, base + ".read_byte", read_byte);
paramOut(os, base + ".write_byte", write_byte);
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
Tick event_tick = 0;
if (event.scheduled())
event_tick = event.when();
paramOut(os, base + ".event_tick", event_tick);
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
}
void
TsunamiIO::PITimer::Counter::unserialize(const string &base, Checkpoint *cp,
const string &section)
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
{
paramIn(cp, section, base + ".count", count);
paramIn(cp, section, base + ".latched_count", latched_count);
paramIn(cp, section, base + ".period", period);
paramIn(cp, section, base + ".mode", mode);
paramIn(cp, section, base + ".output_high", output_high);
paramIn(cp, section, base + ".latch_on", latch_on);
paramIn(cp, section, base + ".read_byte", read_byte);
paramIn(cp, section, base + ".write_byte", write_byte);
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
Tick event_tick;
paramIn(cp, section, base + ".event_tick", event_tick);
if (event_tick)
event.schedule(event_tick);
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
}
TsunamiIO::PITimer::Counter::CounterEvent::CounterEvent(Counter* c_ptr)
: Event(&mainEventQueue)
{
interval = (Tick)(Clock::Float::s / 1193180.0);
counter = c_ptr;
}
void
TsunamiIO::PITimer::Counter::CounterEvent::process()
{
DPRINTF(Tsunami, "Timer Interrupt\n");
switch (counter->mode) {
case PIT_MODE_INTTC:
counter->output_high = true;
case PIT_MODE_RATEGEN:
case PIT_MODE_SQWAVE:
break;
default:
panic("Unimplemented PITimer mode.\n");
}
}
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
const char *
TsunamiIO::PITimer::Counter::CounterEvent::description()
{
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
return "tsunami 8254 Interval timer";
}
TsunamiIO::TsunamiIO(const string &name, Tsunami *t, time_t init_time,
Addr a, MemoryController *mmu, HierParams *hier,
Bus *pio_bus, Tick pio_latency, Tick ci)
: PioDevice(name, t), addr(a), clockInterval(ci), tsunami(t),
pitimer(name + "pitimer"), rtc(name + ".rtc", t, ci)
{
mmu->add_child(this, RangeSize(addr, size));
if (pio_bus) {
pioInterface = newPioInterface(name + ".pio", hier, pio_bus, this,
&TsunamiIO::cacheAccess);
pioInterface->addAddrRange(RangeSize(addr, size));
pioLatency = pio_latency * pio_bus->clockRate;
}
// set the back pointer from tsunami to myself
tsunami->io = this;
timerData = 0;
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
rtc.set_time(init_time == 0 ? time(NULL) : init_time);
picr = 0;
picInterrupting = false;
}
Make the notion of a global event tick independent of the actual CPU cycle ticks. This allows the user to have CPUs of different frequencies, and also allows frequencies and latencies that are not evenly divisible by the CPU frequency. For now, the CPU frequency is still set to the global frequency, but soon, we'll hopefully make the global frequency fixed at something like 1THz and set all other frequencies independently. arch/alpha/ev5.cc: The cycles counter is based on the current cpu cycle. cpu/base_cpu.cc: frequency isn't the cpu parameter anymore, cycleTime is. cpu/base_cpu.hh: frequency isn't the cpu parameter anymore, cycleTime is. create several public functions for getting the cpu frequency and the numbers of ticks for a given number of cycles, etc. cpu/memtest/memtest.cc: cpu/simple_cpu/simple_cpu.cc: cpu/simple_cpu/simple_cpu.hh: cpu/trace/trace_cpu.cc: Now that ticks aren't cpu cycles, fixup code to advance by the proper number of ticks. cpu/memtest/memtest.hh: cpu/trace/trace_cpu.hh: Provide a function to get the number of ticks for a given number of cycles. dev/alpha_console.cc: Update for changes in the way that frequencies and latencies are accessed. Move some stuff to init() dev/alpha_console.hh: Need a pointer to the system and the cpu to get the frequency so we can pass the info to the console code. dev/etherbus.cc: dev/etherbus.hh: dev/etherlink.cc: dev/etherlink.hh: dev/ethertap.cc: dev/ide_disk.hh: dev/ns_gige.cc: dev/ns_gige.hh: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. dev/ide_disk.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. Add some extra debugging printfs dev/platform.cc: dev/sinic.cc: dev/sinic.hh: outline the constructor and destructor dev/platform.hh: outline the constructor and destructor. don't keep track of the interrupt frequency. Only provide the accessor function. dev/tsunami.cc: dev/tsunami.hh: outline the constructor and destructor Don't set the interrupt frequency here. Get it from the actual device that does the interrupting. dev/tsunami_io.cc: dev/tsunami_io.hh: Make the interrupt interval a configuration parameter. (And convert the interval to the new latency/frequency stuff in the python) kern/linux/linux_system.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. kern/tru64/tru64_system.cc: For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. python/m5/config.py: Fix support for cycle_time relative latencies and frequencies. Add support for getting a NetworkBandwidth or a MemoryBandwidth. python/m5/objects/BaseCPU.mpy: All CPUs now have a cycle_time. The default is the global frequency, but it is now possible to set the global frequency to some large value (like 1THz) and set each CPU frequency independently. python/m5/objects/BaseCache.mpy: python/m5/objects/Ide.mpy: Make this a Latency parameter python/m5/objects/BaseSystem.mpy: We need to pass the boot CPU's frequency to the system python/m5/objects/Ethernet.mpy: Update parameter types to use latency and bandwidth types python/m5/objects/Platform.mpy: this frequency isn't needed. We get it from the clock interrupt. python/m5/objects/Tsunami.mpy: The clock generator should hold the frequency sim/eventq.hh: Need to remove this assertion because the writeback event queue is different from the CPU's event queue which can cause this assertion to fail. sim/process.cc: Fix comment. sim/system.hh: Struct member to hold the boot CPU's frequency. sim/universe.cc: remove unneeded variable. --HG-- extra : convert_revision : 51efe4041095234bf458d9b3b0d417f4cae16fdc
2005-04-11 21:32:06 +02:00
Tick
TsunamiIO::frequency() const
{
return Clock::Frequency / clockInterval;
}
Fault
TsunamiIO::read(MemReqPtr &req, uint8_t *data)
{
DPRINTF(Tsunami, "io read va=%#x size=%d IOPorrt=%#x\n",
req->vaddr, req->size, req->vaddr & 0xfff);
Addr daddr = (req->paddr - (addr & EV5::PAddrImplMask));
switch(req->size) {
case sizeof(uint8_t):
switch(daddr) {
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
// PIC1 mask read
case TSDEV_PIC1_MASK:
*(uint8_t*)data = ~mask1;
return No_Fault;
case TSDEV_PIC2_MASK:
*(uint8_t*)data = ~mask2;
return No_Fault;
case TSDEV_PIC1_ISR:
// !!! If this is modified 64bit case needs to be too
// Pal code has to do a 64 bit physical read because there is
// no load physical byte instruction
*(uint8_t*)data = picr;
return No_Fault;
case TSDEV_PIC2_ISR:
// PIC2 not implemnted... just return 0
*(uint8_t*)data = 0x00;
return No_Fault;
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
case TSDEV_TMR0_DATA:
pitimer.counter0.read(data);
return No_Fault;
case TSDEV_TMR1_DATA:
pitimer.counter1.read(data);
return No_Fault;
case TSDEV_TMR2_DATA:
pitimer.counter2.read(data);
return No_Fault;
case TSDEV_RTC_DATA:
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
rtc.readData(data);
return No_Fault;
case TSDEV_CTRL_PORTB:
if (pitimer.counter2.outputHigh())
*data = PORTB_SPKR_HIGH;
else
*data = 0x00;
return No_Fault;
default:
panic("I/O Read - va%#x size %d\n", req->vaddr, req->size);
}
case sizeof(uint16_t):
case sizeof(uint32_t):
panic("I/O Read - invalid size - va %#x size %d\n",
req->vaddr, req->size);
case sizeof(uint64_t):
switch(daddr) {
case TSDEV_PIC1_ISR:
// !!! If this is modified 8bit case needs to be too
// Pal code has to do a 64 bit physical read because there is
// no load physical byte instruction
*(uint64_t*)data = (uint64_t)picr;
return No_Fault;
default:
panic("I/O Read - invalid size - va %#x size %d\n",
req->vaddr, req->size);
}
default:
panic("I/O Read - invalid size - va %#x size %d\n",
req->vaddr, req->size);
}
panic("I/O Read - va%#x size %d\n", req->vaddr, req->size);
return No_Fault;
}
Fault
TsunamiIO::write(MemReqPtr &req, const uint8_t *data)
{
#if TRACING_ON
uint8_t dt = *(uint8_t*)data;
uint64_t dt64 = dt;
#endif
DPRINTF(Tsunami, "io write - va=%#x size=%d IOPort=%#x Data=%#x\n",
req->vaddr, req->size, req->vaddr & 0xfff, dt64);
Addr daddr = (req->paddr - (addr & EV5::PAddrImplMask));
switch(req->size) {
case sizeof(uint8_t):
switch(daddr) {
case TSDEV_PIC1_MASK:
mask1 = ~(*(uint8_t*)data);
if ((picr & mask1) && !picInterrupting) {
picInterrupting = true;
tsunami->cchip->postDRIR(55);
DPRINTF(Tsunami, "posting pic interrupt to cchip\n");
}
if ((!(picr & mask1)) && picInterrupting) {
picInterrupting = false;
tsunami->cchip->clearDRIR(55);
DPRINTF(Tsunami, "clearing pic interrupt\n");
}
return No_Fault;
case TSDEV_PIC2_MASK:
mask2 = *(uint8_t*)data;
//PIC2 Not implemented to interrupt
return No_Fault;
case TSDEV_PIC1_ACK:
// clear the interrupt on the PIC
picr &= ~(1 << (*(uint8_t*)data & 0xF));
if (!(picr & mask1))
tsunami->cchip->clearDRIR(55);
return No_Fault;
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
case TSDEV_DMA1_CMND:
return No_Fault;
case TSDEV_DMA2_CMND:
return No_Fault;
case TSDEV_DMA1_MMASK:
return No_Fault;
case TSDEV_DMA2_MMASK:
return No_Fault;
case TSDEV_PIC2_ACK:
return No_Fault;
case TSDEV_DMA1_RESET:
return No_Fault;
case TSDEV_DMA2_RESET:
return No_Fault;
case TSDEV_DMA1_MODE:
mode1 = *(uint8_t*)data;
return No_Fault;
case TSDEV_DMA2_MODE:
mode2 = *(uint8_t*)data;
return No_Fault;
case TSDEV_DMA1_MASK:
case TSDEV_DMA2_MASK:
return No_Fault;
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
case TSDEV_TMR0_DATA:
pitimer.counter0.write(data);
return No_Fault;
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
case TSDEV_TMR1_DATA:
pitimer.counter1.write(data);
return No_Fault;
case TSDEV_TMR2_DATA:
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
pitimer.counter2.write(data);
return No_Fault;
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
case TSDEV_TMR_CTRL:
pitimer.writeControl(data);
return No_Fault;
case TSDEV_RTC_ADDR:
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
rtc.writeAddr(data);
return No_Fault;
case TSDEV_KBD:
return No_Fault;
case TSDEV_RTC_DATA:
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
rtc.writeData(data);
return No_Fault;
case TSDEV_CTRL_PORTB:
// System Control Port B not implemented
return No_Fault;
default:
Changes for getting FreeBSD to run. SConscript: Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc. arch/alpha/isa_traits.hh: Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks(). cpu/exec_context.hh: cpu/o3/alpha_cpu.hh: Replaced htoa()s with gtoh() and htog(). cpu/o3/fetch_impl.hh: cpu/simple/cpu.cc: Replaced htoa() with gtoh(). dev/disk_image.cc: Replaced htoa()s with letoh()s. dev/ide_ctrl.cc: Got rid of magic numbers. Added IdeChannel and IdeRegType type names where necessary. dev/ide_ctrl.hh: Got rid of unnecessary macros. Changed RegType_t to IdeRegType. Changed bmi_regs to allow accessing registers by name instead of just by array index. Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel. dev/ide_disk.cc: Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array. dev/ide_disk.hh: Updated command register struct. dev/ns_gige.cc: dev/ns_gige.hh: Made ReadConfig and WriteConfig begin with a lower-case letter. writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pciconfigall.cc: writeConfig() now takes a pointer to data as a parameter instead of a copy of data. dev/pcidev.cc: Cleaned up readConfig() and writeConfig() functions. dev/pcidev.hh: Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data. dev/pcireg.h: Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used. dev/rtcreg.h: Added macros for bit fields in RTC status registers A & B. dev/sinic.cc: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. The accessing of elements of PCIConfig structure is updated. dev/sinic.hh: Function name change: WriteConfig --> writeConfig. writeConfig() now takes a pointer to data instead of a copy of data. dev/tsunami_io.cc: Added implementation of new RTC and PIT classes. dev/tsunami_io.hh: Added classes for RTC and PIT modules. dev/tsunamireg.h: Added macros for DMA ports used by Tsunami-Tru64. dev/uart8250.cc: Got rid of a magic number. Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register. dev/uart8250.hh: Added comments and macros dealing with the UART Interrupt ID register. kern/linux/linux_system.cc: Replaced htoa() with htog(). python/m5/objects/Pci.py: PciFake is a python class for Pci Devices that do nothing. python/m5/objects/Tsunami.py: TsunamiFake was renamed as IsaFake. sim/system.cc: Replaced htoa()s with htog()s. dev/isa_fake.cc: New BitKeeper file ``dev/isa_fake.cc'' TsunamiFake was renamed as IsaFake. dev/isa_fake.hh: New BitKeeper file ``dev/isa_fake.hh'' TsunmaiFake was renamed as IsaFake. dev/pitreg.h: New BitKeeper file ``dev/pitreg.h'' Useful macros for working with PIT (Periodic Interval Timer) registers. --HG-- extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
2005-08-15 22:59:58 +02:00
panic("I/O Write - va%#x size %d data %#x\n", req->vaddr, req->size, (int)*data);
}
case sizeof(uint16_t):
case sizeof(uint32_t):
case sizeof(uint64_t):
default:
panic("I/O Write - invalid size - va %#x size %d\n",
req->vaddr, req->size);
}
return No_Fault;
}
void
TsunamiIO::postPIC(uint8_t bitvector)
{
//PIC2 Is not implemented, because nothing of interest there
picr |= bitvector;
if (picr & mask1) {
tsunami->cchip->postDRIR(55);
DPRINTF(Tsunami, "posting pic interrupt to cchip\n");
}
}
void
TsunamiIO::clearPIC(uint8_t bitvector)
{
//PIC2 Is not implemented, because nothing of interest there
picr &= ~bitvector;
if (!(picr & mask1)) {
tsunami->cchip->clearDRIR(55);
DPRINTF(Tsunami, "clearing pic interrupt to cchip\n");
}
}
Tick
TsunamiIO::cacheAccess(MemReqPtr &req)
{
return curTick + pioLatency;
}
void
TsunamiIO::serialize(ostream &os)
{
SERIALIZE_SCALAR(timerData);
SERIALIZE_SCALAR(mask1);
SERIALIZE_SCALAR(mask2);
SERIALIZE_SCALAR(mode1);
SERIALIZE_SCALAR(mode2);
SERIALIZE_SCALAR(picr);
SERIALIZE_SCALAR(picInterrupting);
// Serialize the timers
pitimer.serialize("pitimer", os);
rtc.serialize("rtc", os);
}
void
TsunamiIO::unserialize(Checkpoint *cp, const string &section)
{
UNSERIALIZE_SCALAR(timerData);
UNSERIALIZE_SCALAR(mask1);
UNSERIALIZE_SCALAR(mask2);
UNSERIALIZE_SCALAR(mode1);
UNSERIALIZE_SCALAR(mode2);
UNSERIALIZE_SCALAR(picr);
UNSERIALIZE_SCALAR(picInterrupting);
// Unserialize the timers
pitimer.unserialize("pitimer", cp, section);
rtc.unserialize("rtc", cp, section);
}
BEGIN_DECLARE_SIM_OBJECT_PARAMS(TsunamiIO)
SimObjectParam<Tsunami *> tsunami;
Param<time_t> time;
SimObjectParam<MemoryController *> mmu;
Param<Addr> addr;
SimObjectParam<Bus*> pio_bus;
Param<Tick> pio_latency;
SimObjectParam<HierParams *> hier;
Make the notion of a global event tick independent of the actual CPU cycle ticks. This allows the user to have CPUs of different frequencies, and also allows frequencies and latencies that are not evenly divisible by the CPU frequency. For now, the CPU frequency is still set to the global frequency, but soon, we'll hopefully make the global frequency fixed at something like 1THz and set all other frequencies independently. arch/alpha/ev5.cc: The cycles counter is based on the current cpu cycle. cpu/base_cpu.cc: frequency isn't the cpu parameter anymore, cycleTime is. cpu/base_cpu.hh: frequency isn't the cpu parameter anymore, cycleTime is. create several public functions for getting the cpu frequency and the numbers of ticks for a given number of cycles, etc. cpu/memtest/memtest.cc: cpu/simple_cpu/simple_cpu.cc: cpu/simple_cpu/simple_cpu.hh: cpu/trace/trace_cpu.cc: Now that ticks aren't cpu cycles, fixup code to advance by the proper number of ticks. cpu/memtest/memtest.hh: cpu/trace/trace_cpu.hh: Provide a function to get the number of ticks for a given number of cycles. dev/alpha_console.cc: Update for changes in the way that frequencies and latencies are accessed. Move some stuff to init() dev/alpha_console.hh: Need a pointer to the system and the cpu to get the frequency so we can pass the info to the console code. dev/etherbus.cc: dev/etherbus.hh: dev/etherlink.cc: dev/etherlink.hh: dev/ethertap.cc: dev/ide_disk.hh: dev/ns_gige.cc: dev/ns_gige.hh: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. dev/ide_disk.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. Add some extra debugging printfs dev/platform.cc: dev/sinic.cc: dev/sinic.hh: outline the constructor and destructor dev/platform.hh: outline the constructor and destructor. don't keep track of the interrupt frequency. Only provide the accessor function. dev/tsunami.cc: dev/tsunami.hh: outline the constructor and destructor Don't set the interrupt frequency here. Get it from the actual device that does the interrupting. dev/tsunami_io.cc: dev/tsunami_io.hh: Make the interrupt interval a configuration parameter. (And convert the interval to the new latency/frequency stuff in the python) kern/linux/linux_system.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. kern/tru64/tru64_system.cc: For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. python/m5/config.py: Fix support for cycle_time relative latencies and frequencies. Add support for getting a NetworkBandwidth or a MemoryBandwidth. python/m5/objects/BaseCPU.mpy: All CPUs now have a cycle_time. The default is the global frequency, but it is now possible to set the global frequency to some large value (like 1THz) and set each CPU frequency independently. python/m5/objects/BaseCache.mpy: python/m5/objects/Ide.mpy: Make this a Latency parameter python/m5/objects/BaseSystem.mpy: We need to pass the boot CPU's frequency to the system python/m5/objects/Ethernet.mpy: Update parameter types to use latency and bandwidth types python/m5/objects/Platform.mpy: this frequency isn't needed. We get it from the clock interrupt. python/m5/objects/Tsunami.mpy: The clock generator should hold the frequency sim/eventq.hh: Need to remove this assertion because the writeback event queue is different from the CPU's event queue which can cause this assertion to fail. sim/process.cc: Fix comment. sim/system.hh: Struct member to hold the boot CPU's frequency. sim/universe.cc: remove unneeded variable. --HG-- extra : convert_revision : 51efe4041095234bf458d9b3b0d417f4cae16fdc
2005-04-11 21:32:06 +02:00
Param<Tick> frequency;
END_DECLARE_SIM_OBJECT_PARAMS(TsunamiIO)
BEGIN_INIT_SIM_OBJECT_PARAMS(TsunamiIO)
INIT_PARAM(tsunami, "Tsunami"),
Make the notion of a global event tick independent of the actual CPU cycle ticks. This allows the user to have CPUs of different frequencies, and also allows frequencies and latencies that are not evenly divisible by the CPU frequency. For now, the CPU frequency is still set to the global frequency, but soon, we'll hopefully make the global frequency fixed at something like 1THz and set all other frequencies independently. arch/alpha/ev5.cc: The cycles counter is based on the current cpu cycle. cpu/base_cpu.cc: frequency isn't the cpu parameter anymore, cycleTime is. cpu/base_cpu.hh: frequency isn't the cpu parameter anymore, cycleTime is. create several public functions for getting the cpu frequency and the numbers of ticks for a given number of cycles, etc. cpu/memtest/memtest.cc: cpu/simple_cpu/simple_cpu.cc: cpu/simple_cpu/simple_cpu.hh: cpu/trace/trace_cpu.cc: Now that ticks aren't cpu cycles, fixup code to advance by the proper number of ticks. cpu/memtest/memtest.hh: cpu/trace/trace_cpu.hh: Provide a function to get the number of ticks for a given number of cycles. dev/alpha_console.cc: Update for changes in the way that frequencies and latencies are accessed. Move some stuff to init() dev/alpha_console.hh: Need a pointer to the system and the cpu to get the frequency so we can pass the info to the console code. dev/etherbus.cc: dev/etherbus.hh: dev/etherlink.cc: dev/etherlink.hh: dev/ethertap.cc: dev/ide_disk.hh: dev/ns_gige.cc: dev/ns_gige.hh: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. dev/ide_disk.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. Add some extra debugging printfs dev/platform.cc: dev/sinic.cc: dev/sinic.hh: outline the constructor and destructor dev/platform.hh: outline the constructor and destructor. don't keep track of the interrupt frequency. Only provide the accessor function. dev/tsunami.cc: dev/tsunami.hh: outline the constructor and destructor Don't set the interrupt frequency here. Get it from the actual device that does the interrupting. dev/tsunami_io.cc: dev/tsunami_io.hh: Make the interrupt interval a configuration parameter. (And convert the interval to the new latency/frequency stuff in the python) kern/linux/linux_system.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. kern/tru64/tru64_system.cc: For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. python/m5/config.py: Fix support for cycle_time relative latencies and frequencies. Add support for getting a NetworkBandwidth or a MemoryBandwidth. python/m5/objects/BaseCPU.mpy: All CPUs now have a cycle_time. The default is the global frequency, but it is now possible to set the global frequency to some large value (like 1THz) and set each CPU frequency independently. python/m5/objects/BaseCache.mpy: python/m5/objects/Ide.mpy: Make this a Latency parameter python/m5/objects/BaseSystem.mpy: We need to pass the boot CPU's frequency to the system python/m5/objects/Ethernet.mpy: Update parameter types to use latency and bandwidth types python/m5/objects/Platform.mpy: this frequency isn't needed. We get it from the clock interrupt. python/m5/objects/Tsunami.mpy: The clock generator should hold the frequency sim/eventq.hh: Need to remove this assertion because the writeback event queue is different from the CPU's event queue which can cause this assertion to fail. sim/process.cc: Fix comment. sim/system.hh: Struct member to hold the boot CPU's frequency. sim/universe.cc: remove unneeded variable. --HG-- extra : convert_revision : 51efe4041095234bf458d9b3b0d417f4cae16fdc
2005-04-11 21:32:06 +02:00
INIT_PARAM(time, "System time to use (0 for actual time"),
INIT_PARAM(mmu, "Memory Controller"),
INIT_PARAM(addr, "Device Address"),
INIT_PARAM(pio_bus, "The IO Bus to attach to"),
INIT_PARAM_DFLT(pio_latency, "Programmed IO latency in bus cycles", 1),
Make the notion of a global event tick independent of the actual CPU cycle ticks. This allows the user to have CPUs of different frequencies, and also allows frequencies and latencies that are not evenly divisible by the CPU frequency. For now, the CPU frequency is still set to the global frequency, but soon, we'll hopefully make the global frequency fixed at something like 1THz and set all other frequencies independently. arch/alpha/ev5.cc: The cycles counter is based on the current cpu cycle. cpu/base_cpu.cc: frequency isn't the cpu parameter anymore, cycleTime is. cpu/base_cpu.hh: frequency isn't the cpu parameter anymore, cycleTime is. create several public functions for getting the cpu frequency and the numbers of ticks for a given number of cycles, etc. cpu/memtest/memtest.cc: cpu/simple_cpu/simple_cpu.cc: cpu/simple_cpu/simple_cpu.hh: cpu/trace/trace_cpu.cc: Now that ticks aren't cpu cycles, fixup code to advance by the proper number of ticks. cpu/memtest/memtest.hh: cpu/trace/trace_cpu.hh: Provide a function to get the number of ticks for a given number of cycles. dev/alpha_console.cc: Update for changes in the way that frequencies and latencies are accessed. Move some stuff to init() dev/alpha_console.hh: Need a pointer to the system and the cpu to get the frequency so we can pass the info to the console code. dev/etherbus.cc: dev/etherbus.hh: dev/etherlink.cc: dev/etherlink.hh: dev/ethertap.cc: dev/ide_disk.hh: dev/ns_gige.cc: dev/ns_gige.hh: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. dev/ide_disk.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. Add some extra debugging printfs dev/platform.cc: dev/sinic.cc: dev/sinic.hh: outline the constructor and destructor dev/platform.hh: outline the constructor and destructor. don't keep track of the interrupt frequency. Only provide the accessor function. dev/tsunami.cc: dev/tsunami.hh: outline the constructor and destructor Don't set the interrupt frequency here. Get it from the actual device that does the interrupting. dev/tsunami_io.cc: dev/tsunami_io.hh: Make the interrupt interval a configuration parameter. (And convert the interval to the new latency/frequency stuff in the python) kern/linux/linux_system.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. kern/tru64/tru64_system.cc: For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. python/m5/config.py: Fix support for cycle_time relative latencies and frequencies. Add support for getting a NetworkBandwidth or a MemoryBandwidth. python/m5/objects/BaseCPU.mpy: All CPUs now have a cycle_time. The default is the global frequency, but it is now possible to set the global frequency to some large value (like 1THz) and set each CPU frequency independently. python/m5/objects/BaseCache.mpy: python/m5/objects/Ide.mpy: Make this a Latency parameter python/m5/objects/BaseSystem.mpy: We need to pass the boot CPU's frequency to the system python/m5/objects/Ethernet.mpy: Update parameter types to use latency and bandwidth types python/m5/objects/Platform.mpy: this frequency isn't needed. We get it from the clock interrupt. python/m5/objects/Tsunami.mpy: The clock generator should hold the frequency sim/eventq.hh: Need to remove this assertion because the writeback event queue is different from the CPU's event queue which can cause this assertion to fail. sim/process.cc: Fix comment. sim/system.hh: Struct member to hold the boot CPU's frequency. sim/universe.cc: remove unneeded variable. --HG-- extra : convert_revision : 51efe4041095234bf458d9b3b0d417f4cae16fdc
2005-04-11 21:32:06 +02:00
INIT_PARAM_DFLT(hier, "Hierarchy global variables", &defaultHierParams),
INIT_PARAM(frequency, "clock interrupt frequency")
END_INIT_SIM_OBJECT_PARAMS(TsunamiIO)
CREATE_SIM_OBJECT(TsunamiIO)
{
return new TsunamiIO(getInstanceName(), tsunami, time, addr, mmu, hier,
pio_bus, pio_latency, frequency);
}
REGISTER_SIM_OBJECT("TsunamiIO", TsunamiIO)