sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
gem5/python/m5/objects/BaseCache.mpy

63 lines
2.9 KiB
Text
Raw Normal View History

New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
2005-01-15 10:12:25 +01:00
from BaseMem import BaseMem
Added support for multiple prefetch address from single access (depth of prefetch) also added the ability to squash some prefetchs to match the GHB technique python/m5/objects/BaseCache.mpy: Added parameters --HG-- extra : convert_revision : 92b646eb61455d283a5c2ac0b3f8fbd62e39fb87
2005-04-03 03:36:08 +02:00
class Prefetch(Enum): vals = ['none', 'tagged', 'stride', 'ghb']
New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
2005-01-15 10:12:25 +01:00
simobj BaseCache(BaseMem):
Update config file language to take simobj and no longer use siminst objects/AlphaConsole.mpy: objects/AlphaTLB.mpy: objects/BadDevice.mpy: objects/BaseCPU.mpy: objects/BaseCache.mpy: objects/BaseSystem.mpy: objects/Bus.mpy: objects/CoherenceProtocol.mpy: objects/Device.mpy: objects/DiskImage.mpy: objects/Ethernet.mpy: objects/Ide.mpy: objects/IntrControl.mpy: objects/MemTest.mpy: objects/Pci.mpy: objects/PhysicalMemory.mpy: objects/Platform.mpy: objects/Process.mpy: objects/Repl.mpy: objects/Root.mpy: objects/SimConsole.mpy: objects/SimpleDisk.mpy: objects/Tsunami.mpy: objects/Uart.mpy: simobj now requires a type= line if it is actually intended to be a type sim/pyconfig/SConscript: keep track of the filename of embedded files for better error messages. sim/pyconfig/m5config.py: Add support for the trickery done with the compiler to get the simobj language feature added to the importer. fix the bug that gave objects the wrong name in error messages. test/genini.py: Globals have been fixed and use execfile --HG-- extra : convert_revision : b74495fd6f3479a87ecea7f1234ebb6731279b2b
2005-02-03 03:13:01 +01:00
type = 'BaseCache'
get rid of defined and just access the env dict directly get rid of the alias for true to True and false to False to keep consistent python syntax. util/stats/info.py: Fix typo --HG-- extra : convert_revision : e69588a8de52424e043315e70008ca3a3ede7d5b
2005-02-03 23:04:54 +01:00
adaptive_compression = Param.Bool(False,
New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
2005-01-15 10:12:25 +01:00
"Use an adaptive compression scheme")
assoc = Param.Int("associativity")
block_size = Param.Int("block size in bytes")
get rid of defined and just access the env dict directly get rid of the alias for true to True and false to False to keep consistent python syntax. util/stats/info.py: Fix typo --HG-- extra : convert_revision : e69588a8de52424e043315e70008ca3a3ede7d5b
2005-02-03 23:04:54 +01:00
compressed_bus = Param.Bool(False,
New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
2005-01-15 10:12:25 +01:00
"This cache connects to a compressed memory")
Make the notion of a global event tick independent of the actual CPU cycle ticks. This allows the user to have CPUs of different frequencies, and also allows frequencies and latencies that are not evenly divisible by the CPU frequency. For now, the CPU frequency is still set to the global frequency, but soon, we'll hopefully make the global frequency fixed at something like 1THz and set all other frequencies independently. arch/alpha/ev5.cc: The cycles counter is based on the current cpu cycle. cpu/base_cpu.cc: frequency isn't the cpu parameter anymore, cycleTime is. cpu/base_cpu.hh: frequency isn't the cpu parameter anymore, cycleTime is. create several public functions for getting the cpu frequency and the numbers of ticks for a given number of cycles, etc. cpu/memtest/memtest.cc: cpu/simple_cpu/simple_cpu.cc: cpu/simple_cpu/simple_cpu.hh: cpu/trace/trace_cpu.cc: Now that ticks aren't cpu cycles, fixup code to advance by the proper number of ticks. cpu/memtest/memtest.hh: cpu/trace/trace_cpu.hh: Provide a function to get the number of ticks for a given number of cycles. dev/alpha_console.cc: Update for changes in the way that frequencies and latencies are accessed. Move some stuff to init() dev/alpha_console.hh: Need a pointer to the system and the cpu to get the frequency so we can pass the info to the console code. dev/etherbus.cc: dev/etherbus.hh: dev/etherlink.cc: dev/etherlink.hh: dev/ethertap.cc: dev/ide_disk.hh: dev/ns_gige.cc: dev/ns_gige.hh: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. dev/ide_disk.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. Add some extra debugging printfs dev/platform.cc: dev/sinic.cc: dev/sinic.hh: outline the constructor and destructor dev/platform.hh: outline the constructor and destructor. don't keep track of the interrupt frequency. Only provide the accessor function. dev/tsunami.cc: dev/tsunami.hh: outline the constructor and destructor Don't set the interrupt frequency here. Get it from the actual device that does the interrupting. dev/tsunami_io.cc: dev/tsunami_io.hh: Make the interrupt interval a configuration parameter. (And convert the interval to the new latency/frequency stuff in the python) kern/linux/linux_system.cc: update for changes in the way bandwidths are passed from python to C++ to accomidate the new way that ticks works. For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. kern/tru64/tru64_system.cc: For now, we must get the boot cpu's frequency as a parameter since allowing the system to have a pointer to the boot cpu would cause a cycle. python/m5/config.py: Fix support for cycle_time relative latencies and frequencies. Add support for getting a NetworkBandwidth or a MemoryBandwidth. python/m5/objects/BaseCPU.mpy: All CPUs now have a cycle_time. The default is the global frequency, but it is now possible to set the global frequency to some large value (like 1THz) and set each CPU frequency independently. python/m5/objects/BaseCache.mpy: python/m5/objects/Ide.mpy: Make this a Latency parameter python/m5/objects/BaseSystem.mpy: We need to pass the boot CPU's frequency to the system python/m5/objects/Ethernet.mpy: Update parameter types to use latency and bandwidth types python/m5/objects/Platform.mpy: this frequency isn't needed. We get it from the clock interrupt. python/m5/objects/Tsunami.mpy: The clock generator should hold the frequency sim/eventq.hh: Need to remove this assertion because the writeback event queue is different from the CPU's event queue which can cause this assertion to fail. sim/process.cc: Fix comment. sim/system.hh: Struct member to hold the boot CPU's frequency. sim/universe.cc: remove unneeded variable. --HG-- extra : convert_revision : 51efe4041095234bf458d9b3b0d417f4cae16fdc
2005-04-11 21:32:06 +02:00
compression_latency = Param.Latency('0c',
New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
2005-01-15 10:12:25 +01:00
"Latency in cycles of compression algorithm")
get rid of defined and just access the env dict directly get rid of the alias for true to True and false to False to keep consistent python syntax. util/stats/info.py: Fix typo --HG-- extra : convert_revision : e69588a8de52424e043315e70008ca3a3ede7d5b
2005-02-03 23:04:54 +01:00
do_copy = Param.Bool(False, "perform fast copies in the cache")
New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
2005-01-15 10:12:25 +01:00
hash_delay = Param.Int(1, "time in cycles of hash access")
in_bus = Param.Bus(NULL, "incoming bus object")
get rid of defined and just access the env dict directly get rid of the alias for true to True and false to False to keep consistent python syntax. util/stats/info.py: Fix typo --HG-- extra : convert_revision : e69588a8de52424e043315e70008ca3a3ede7d5b
2005-02-03 23:04:54 +01:00
lifo = Param.Bool(False,
some changes for a split lifo in the new python config. objects/BaseCache.mpy: add all the Split parameters to the BaseCache simobj. --HG-- extra : convert_revision : 4fcba3ce730f730ca8628ac7f4aa0fb9476474ab
2005-02-01 23:35:01 +01:00
"whether this NIC partition should use LIFO repl. policy")
New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
2005-01-15 10:12:25 +01:00
max_miss_count = Param.Counter(0,
"number of misses to handle before calling exit")
mshrs = Param.Int("number of MSHRs (max outstanding requests)")
out_bus = Param.Bus("outgoing bus object")
get rid of defined and just access the env dict directly get rid of the alias for true to True and false to False to keep consistent python syntax. util/stats/info.py: Fix typo --HG-- extra : convert_revision : e69588a8de52424e043315e70008ca3a3ede7d5b
2005-02-03 23:04:54 +01:00
prioritizeRequests = Param.Bool(False,
New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
2005-01-15 10:12:25 +01:00
"always service demand misses first")
protocol = Param.CoherenceProtocol(NULL, "coherence protocol to use")
repl = Param.Repl(NULL, "replacement policy")
First step in fixing up parameter handling. Clean up the way ranges work, more fully support metric prefixes for all integer types, and convert memory sized parameters to the MemorySize type. python/m5/config.py: - no more _Param and _ParamProxy stuff. Use the names ParamBase and ParamFactory to hopefully make it clearer what we intend. - Get rid of RangeSize and the old Range class and more fully flesh out the Range class to deal with types of parameters and different kinds of ranges. - Call toInteger on the CheckedInt types so we can use metric prefixes in strings for all integers. - Get rid of the K, M, and G constants. Use the proper type or call one of the functions in the convert package. python/m5/convert.py: Simple way to deal with both floating point and integer strings. python/m5/objects/BaseCache.mpy: python/m5/objects/Ethernet.mpy: This is a MemorySize typed parameter --HG-- extra : convert_revision : 92b4ea662d723abdd6c0a49065b79c25400fac9b
2005-03-23 19:25:48 +01:00
size = Param.MemorySize("capacity in bytes")
get rid of defined and just access the env dict directly get rid of the alias for true to True and false to False to keep consistent python syntax. util/stats/info.py: Fix typo --HG-- extra : convert_revision : e69588a8de52424e043315e70008ca3a3ede7d5b
2005-02-03 23:04:54 +01:00
split = Param.Bool(False, "whether or not this cache is split")
some changes for a split lifo in the new python config. objects/BaseCache.mpy: add all the Split parameters to the BaseCache simobj. --HG-- extra : convert_revision : 4fcba3ce730f730ca8628ac7f4aa0fb9476474ab
2005-02-01 23:35:01 +01:00
split_size = Param.Int(0,
"How many ways of the cache belong to CPU/LRU partition")
get rid of defined and just access the env dict directly get rid of the alias for true to True and false to False to keep consistent python syntax. util/stats/info.py: Fix typo --HG-- extra : convert_revision : e69588a8de52424e043315e70008ca3a3ede7d5b
2005-02-03 23:04:54 +01:00
store_compressed = Param.Bool(False,
New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
2005-01-15 10:12:25 +01:00
"Store compressed data in the cache")
subblock_size = Param.Int(0,
"Size of subblock in IIC used for compression")
tgts_per_mshr = Param.Int("max number of accesses per MSHR")
trace_addr = Param.Addr(0, "address to trace")
get rid of defined and just access the env dict directly get rid of the alias for true to True and false to False to keep consistent python syntax. util/stats/info.py: Fix typo --HG-- extra : convert_revision : e69588a8de52424e043315e70008ca3a3ede7d5b
2005-02-03 23:04:54 +01:00
two_queue = Param.Bool(False,
some changes for a split lifo in the new python config. objects/BaseCache.mpy: add all the Split parameters to the BaseCache simobj. --HG-- extra : convert_revision : 4fcba3ce730f730ca8628ac7f4aa0fb9476474ab
2005-02-01 23:35:01 +01:00
"whether the lifo should have two queue replacement")
New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
2005-01-15 10:12:25 +01:00
write_buffers = Param.Int(8, "number of write buffers")
Another pass at the prefetcher. Now it works with both miss and access reference streams. Reworked how it is instattiated and how it communicates with other cache objects. SConscript: Compile all the prefetcher files objects/BaseCache.mpy: Add parameters for prefetcher --HG-- extra : convert_revision : 2faa81c17673420ffae72a50a27e310d4c0f4135
2005-04-02 02:26:44 +02:00
prefetch_miss = Param.Bool(False,
"wheter you are using the hardware prefetcher from Miss stream")
prefetch_access = Param.Bool(False,
"wheter you are using the hardware prefetcher from Access stream")
Rework the way the prefetcher is used. Now we copy the request from the prefetch queue and into the mq when issued objects/BaseCache.mpy: Add some parameters for prefetcher --HG-- extra : convert_revision : 1a2e6d2ce5359fab0a4d5d4639a701131101d68c
2005-03-30 22:05:58 +02:00
prefetcher_size = Param.Int(100,
"Number of entries in the harware prefetch queue")
Another pass at the prefetcher. Now it works with both miss and access reference streams. Reworked how it is instattiated and how it communicates with other cache objects. SConscript: Compile all the prefetcher files objects/BaseCache.mpy: Add parameters for prefetcher --HG-- extra : convert_revision : 2faa81c17673420ffae72a50a27e310d4c0f4135
2005-04-02 02:26:44 +02:00
prefetch_past_page = Param.Bool(False,
"Allow prefetches to cross virtual page boundaries")
Added support for multiple prefetch address from single access (depth of prefetch) also added the ability to squash some prefetchs to match the GHB technique python/m5/objects/BaseCache.mpy: Added parameters --HG-- extra : convert_revision : 92b646eb61455d283a5c2ac0b3f8fbd62e39fb87
2005-04-03 03:36:08 +02:00
prefetch_serial_squash = Param.Bool(False,
"Squash prefetches with a later time on a subsequent miss")
prefetch_degree = Param.Int(1,
"Degree of the prefetch depth")
prefetch_latency = Param.Tick(10,
"Latency of the prefetcher")
prefetch_policy = Param.Prefetch('none',
"Type of prefetcher to use")
Add more prefetcher support. SConscript: Add GHB prefetcher to build list python/m5/objects/BaseCache.mpy: Add parameters about when to remove prefetches and wether or not to use cpuid to differentiate access patterns --HG-- extra : convert_revision : 1d3fef21910f2f34b8c28d01b5f6e86eef53357c
2005-04-04 22:25:22 +02:00
prefetch_cache_check_push = Param.Bool(True,
"Check if in cash on push or pop of prefetch queue")
prefetch_use_cpu_id = Param.Bool(True,
"Use the CPU ID to seperate calculations of prefetches")
Add Parameter to only do prefetch calculations on data accesses not instruction accesses --HG-- extra : convert_revision : 85c987561a962f21466f0c1bd0473300d341c398
2005-04-08 23:19:56 +02:00
prefetch_data_accesses_only = Param.Bool(False,
"Only prefetch on data not on instruction accesses")
Reference in a new issue Copy permalink