gem5/src/mem/bridge.cc

293 lines
9 KiB
C++
Raw Normal View History

/*
* Copyright (c) 2006 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Ali Saidi
* Steve Reinhardt
*/
/**
* @file
* Definition of a simple bus bridge without buffering.
*/
#include <algorithm>
#include "base/trace.hh"
#include "mem/bridge.hh"
#include "sim/builder.hh"
Bridge::BridgePort::BridgePort(const std::string &_name,
Bridge *_bridge, BridgePort *_otherPort,
int _delay, int _queueLimit,
bool fix_partial_write)
: Port(_name), bridge(_bridge), otherPort(_otherPort),
delay(_delay), fixPartialWrite(fix_partial_write),
outstandingResponses(0), queueLimit(_queueLimit), sendEvent(this)
{
}
Bridge::Bridge(const std::string &n, int qsa, int qsb,
Tick _delay, int write_ack, bool fix_partial_write_a,
bool fix_partial_write_b)
: MemObject(n),
portA(n + "-portA", this, &portB, _delay, qsa, fix_partial_write_a),
portB(n + "-portB", this, &portA, _delay, qsa, fix_partial_write_b),
ackWrites(write_ack)
{
if (ackWrites)
panic("No support for acknowledging writes\n");
}
Port *
Move SimObject creation and Port connection loops into Python. Add Port and VectorPort objects and support for specifying port connections via assignment. The whole C++ ConfigNode hierarchy is gone now, as are C++ Connector objects. configs/test/fs.py: configs/test/test.py: Rewrite for new port connector syntax. src/SConscript: Remove unneeded files: - mem/connector.* - sim/config* src/dev/io_device.hh: src/mem/bridge.cc: src/mem/bridge.hh: src/mem/bus.cc: src/mem/bus.hh: src/mem/mem_object.hh: src/mem/physical.cc: src/mem/physical.hh: Allow getPort() to take an optional index to support vector ports (eventually). src/python/m5/__init__.py: Move SimObject construction and port connection operations into Python (with C++ calls). src/python/m5/config.py: Move SimObject construction and port connection operations into Python (with C++ calls). Add support for declaring and connecting MemObject ports in Python. src/python/m5/objects/Bus.py: src/python/m5/objects/PhysicalMemory.py: Add port declaration. src/sim/builder.cc: src/sim/builder.hh: src/sim/serialize.cc: src/sim/serialize.hh: ConfigNodes are gone; builder just gets the name of a .ini file section now. src/sim/main.cc: Move SimObject construction and port connection operations into Python (with C++ calls). Split remaining initialization operations into two parts, loadIniFile() and finalInit(). src/sim/param.cc: src/sim/param.hh: SimObject resolution done globally in Python now (not via ConfigNode hierarchy). src/sim/sim_object.cc: Remove unneeded #include. --HG-- extra : convert_revision : 2fa4001eaaec0c9a4231ef6e854f8e156d930dfe
2006-06-14 05:19:28 +02:00
Bridge::getPort(const std::string &if_name, int idx)
{
BridgePort *port;
if (if_name == "side_a")
port = &portA;
else if (if_name == "side_b")
port = &portB;
else
return NULL;
if (port->getPeer() != NULL)
panic("bridge side %s already connected to.", if_name);
return port;
}
void
Bridge::init()
{
// Make sure that both sides are connected to.
if (portA.getPeer() == NULL || portB.getPeer() == NULL)
fatal("Both ports of bus bridge are not connected to a bus.\n");
if (portA.peerBlockSize() != portB.peerBlockSize())
fatal("Busses don't have the same block size... Not supported.\n");
}
/** Function called by the port when the bus is receiving a Timing
* transaction.*/
bool
Bridge::BridgePort::recvTiming(PacketPtr pkt)
{
if (pkt->flags & SNOOP_COMMIT) {
DPRINTF(BusBridge, "recvTiming: src %d dest %d addr 0x%x\n",
pkt->getSrc(), pkt->getDest(), pkt->getAddr());
return otherPort->queueForSendTiming(pkt);
}
else {
// Else it's just a snoop, properly return if we are blocking
return !queueFull();
}
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
}
bool
Bridge::BridgePort::queueForSendTiming(PacketPtr pkt)
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
{
if (queueFull()) {
DPRINTF(BusBridge, "Queue full, returning false\n");
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
return false;
}
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
if (pkt->isResponse()) {
// This is a response for a request we forwarded earlier. The
// corresponding PacketBuffer should be stored in the packet's
// senderState field.
PacketBuffer *buf = dynamic_cast<PacketBuffer*>(pkt->senderState);
assert(buf != NULL);
// set up new packet dest & senderState based on values saved
// from original request
buf->fixResponse(pkt);
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
DPRINTF(BusBridge, "restoring sender state: %#X, from packet buffer: %#X\n",
pkt->senderState, buf);
DPRINTF(BusBridge, " is response, new dest %d\n", pkt->getDest());
delete buf;
}
Tick readyTime = curTick + delay;
PacketBuffer *buf = new PacketBuffer(pkt, readyTime);
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
DPRINTF(BusBridge, "old sender state: %#X, new sender state: %#X\n",
buf->origSenderState, buf);
// If we're about to put this packet at the head of the queue, we
// need to schedule an event to do the transmit. Otherwise there
// should already be an event scheduled for sending the head
// packet.
if (sendQueue.empty()) {
sendEvent.schedule(readyTime);
}
sendQueue.push_back(buf);
return true;
}
void
Bridge::BridgePort::trySend()
{
assert(!sendQueue.empty());
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
bool was_full = queueFull();
int pbs = peerBlockSize();
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
PacketBuffer *buf = sendQueue.front();
assert(buf->ready <= curTick);
PacketPtr pkt = buf->pkt;
pkt->flags &= ~SNOOP_COMMIT; //CLear it if it was set
if (pkt->cmd == MemCmd::WriteInvalidateReq && fixPartialWrite &&
pkt->getOffset(pbs) && pkt->getSize() != pbs) {
buf->partialWriteFix(this);
pkt = buf->pkt;
}
DPRINTF(BusBridge, "trySend: origSrc %d dest %d addr 0x%x\n",
buf->origSrc, pkt->getDest(), pkt->getAddr());
if (sendTiming(pkt)) {
// send successful
sendQueue.pop_front();
buf->pkt = NULL; // we no longer own packet, so it's not safe to look at it
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
if (buf->expectResponse) {
// Must wait for response. We just need to count outstanding
// responses (in case we want to cap them); PacketBuffer
// pointer will be recovered on response.
++outstandingResponses;
DPRINTF(BusBridge, " successful: awaiting response (%d)\n",
outstandingResponses);
} else {
// no response expected... deallocate packet buffer now.
DPRINTF(BusBridge, " successful: no response expected\n");
delete buf;
}
// If there are more packets to send, schedule event to try again.
if (!sendQueue.empty()) {
buf = sendQueue.front();
sendEvent.schedule(std::max(buf->ready, curTick + 1));
}
// Let things start sending again
if (was_full) {
DPRINTF(BusBridge, "Queue was full, sending retry\n");
otherPort->sendRetry();
}
} else {
DPRINTF(BusBridge, " unsuccessful\n");
buf->undoPartialWriteFix();
}
}
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
void
Bridge::BridgePort::recvRetry()
{
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
trySend();
}
/** Function called by the port when the bus is receiving a Atomic
* transaction.*/
Tick
Bridge::BridgePort::recvAtomic(PacketPtr pkt)
{
return otherPort->sendAtomic(pkt) + delay;
}
/** Function called by the port when the bus is receiving a Functional
* transaction.*/
void
Bridge::BridgePort::recvFunctional(PacketPtr pkt)
{
std::list<PacketBuffer*>::iterator i;
bool pktContinue = true;
for (i = sendQueue.begin(); i != sendQueue.end(); ++i) {
if (pkt->intersect((*i)->pkt)) {
pktContinue &= fixPacket(pkt, (*i)->pkt);
}
}
if (pktContinue) {
otherPort->sendFunctional(pkt);
}
}
/** Function called by the port when the bus is receiving a status change.*/
void
Bridge::BridgePort::recvStatusChange(Port::Status status)
{
otherPort->sendStatusChange(status);
}
void
Bridge::BridgePort::getDeviceAddressRanges(AddrRangeList &resp,
AddrRangeList &snoop)
{
otherPort->getPeerAddressRanges(resp, snoop);
}
BEGIN_DECLARE_SIM_OBJECT_PARAMS(Bridge)
Param<int> queue_size_a;
Param<int> queue_size_b;
Param<Tick> delay;
Param<bool> write_ack;
Param<bool> fix_partial_write_a;
Param<bool> fix_partial_write_b;
END_DECLARE_SIM_OBJECT_PARAMS(Bridge)
BEGIN_INIT_SIM_OBJECT_PARAMS(Bridge)
INIT_PARAM(queue_size_a, "The size of the queue for data coming into side a"),
INIT_PARAM(queue_size_b, "The size of the queue for data coming into side b"),
INIT_PARAM(delay, "The miminum delay to cross this bridge"),
INIT_PARAM(write_ack, "Acknowledge any writes that are received."),
INIT_PARAM(fix_partial_write_a, "Fixup any partial block writes that are received"),
INIT_PARAM(fix_partial_write_b, "Fixup any partial block writes that are received")
END_INIT_SIM_OBJECT_PARAMS(Bridge)
CREATE_SIM_OBJECT(Bridge)
{
return new Bridge(getInstanceName(), queue_size_a, queue_size_b, delay,
write_ack, fix_partial_write_a, fix_partial_write_b);
}
REGISTER_SIM_OBJECT("Bridge", Bridge)