These days, DEV_OPEN calls to character drivers block the calling
thread until completion or failure, and thus never return SUSPEND to
the caller. The same already applied to BDEV_OPEN calls to block
drivers. It has thus become impossible for a process to enter a state
of being blocked on a device open call.
There is currently no support for restarting device open calls to
restarted character drivers. This support was present in the _DOPEN
logic, but was already no longer triggering. In the future, this case
should be handled by the thread performing the open request.
Change-Id: I6cc1e7b4c9ed116c6ce160b315e6e060124dce00
Not doing so caused PFS to commit protocol violations by relying on
stale information when sending replies. This stale information always
happened to be correct, which is why the problem went unnoticed.
Change-Id: Ia42ca670718d6e731193cd2c34a3ff455f8a94d3
- change all sync char drivers into async drivers;
- retire support for the sync protocol in libchardev;
- remove async dev style, as this is now the default;
- remove dev_status from VFS;
- clean up now-unused protocol messages.
Change-Id: I6aacff712292f6b29f2ccd51bc1e7d7003723e87
The async char protocol already has this, so this patch closes the
gap between the two protocols a bit. Support for this flag has been
added to all sync char drivers that support CANCEL at all.
The LOG driver was already using the asynchronous protocol, but it
did not support the nonblocking transfer flag. This has been fixed
as well.
Change-Id: Ia55432c9f102765b59ad3feb45a8bd47a782c93f
As with w_task, this ensures that the field remains cleared if it is
not used. Without this, worker_stop could mistakenly identify a thread
as talking to a device driver rather than a (crashed) file server.
Change-Id: I7d3ebed3efc3cd4f5c891f61c67a6463109b6376
It was always set, but not always cleared, when talking to asynchronous
drivers. This could cause erratic behavior upon a driver crash.
Normally, a worker thread's w_task field is set when it's about to
communicate with a driver or FS. Then upon receiving a reply we can
do sanity checks (that the thread we want to wake up was actually
waiting for a reply). Also, when a driver/FS crashes, we can identify
which worker threads were talking to the crashed endpoint and handle
the error gracefully.
Asynchronous drivers are a bit special, though. In most cases, the
sender of the request is not interested in the reply (the sender was
suspended and only wants to know whether the request was successfully
caried out or not). However, the open request is special, as the reply
carries information needed by the sender. This is the only request
where a worker thread actually yields and waits for the result. This is
also the only case where we're interested in setting w_task for
asynchronous drivers.
Change-Id: Ia1ce2747937df376122b5e13b6a069de27fcc379
* Removed startup code patches in lib/csu regarding kernel to userland
ABI.
* Aligned stack layout on NetBSD stack layout.
* Generate valid stack pointers instead of offsets by taking into account
_minix_kerninfo->kinfo->user_sp.
* Refactored stack generation, by moving part of execve in two
functions {minix_stack_params(), minix_stack_fill()} and using them
in execve(), rs and vm.
* Changed load offset of rtld (ld.so) to:
execi.args.stack_high - execi.args.stack_size - 0xa00000
which is 10MB below the main executable stack.
Change-Id: I839daf3de43321cded44105634102d419cb36cec
The main motivation for this change is that only Loris supports
multithreading, and Loris supports dynamic thread allocation, so the
number of supported threads can be implemented as a bit flag (i.e.,
either 1 or "at least as many as VFS has"). The ABI break obviates the
need to support file system versioning at this time, and several
other aspects are better implemented as flags as well. Other changes:
- replace peek/bpeek test upon mount with FS flag as well;
- mark libsffs as 64-bit file size capable;
- remove old (3.2.1) getdents support.
Change-Id: I313eace9c50ed816656c31cd47d969033d952a03
- pass in file system type through mount(2), and return this type in
statvfs structures as generated by [f]statvfs(2);
- align mount flags field with NetBSD's, splitting out service flags
which are not to be passed to VFS;
- remove limitation of mount ABI to 16-byte labels, so that labels
can be made larger in the future;
- introduce new m11 message union type for mount(2) as side effect.
Change-Id: I88b7710e297e00a5e4582ada5243d3d5c2801fd9
This is a requirement for implementing calls such as getmntinfo(3).
VFS is now responsible for filling in some of the structure's fields.
Change-Id: I0c1fa78019587efefd2949b3be38cd9a7ddc2ced
The following types are modified (old -> new):
* _BSD_USECONDS_T_ int -> unsigned int
* __socklen_t __int32_t -> __uint32_t
* blksize_t uint32_t -> int32_t
* rlim_t uint32_t -> uint64_t
On ARM:
* _BSD_CLOCK_T_ int -> unsigned int
On Intel:
* _BSD_CLOCK_T_ int -> unsigned long
bin/cat is also updated in order to fix warnings.
_BSD_TIMER_T_ has still to be aligned.
Change-Id: I2b4fda024125a19901120546c4e22e443ba5e9d7
clock_t is currently a signed type, but in NetBSD this is not the
case. As we plan on aligning our types we have to change this as this
prevents negative delta from being correctly used.
Change-Id: I9bccdee2b41626b0262471dc1900de505a1991a7
Created a new directory called bsp (board support package) to hold
board or system on chip specific code. The idea is the following.
Change-Id: Ica5886806940facae2fa5492fcc938b3c2b989be
The GPIO revision check assumed the major and minor revision numbers where
located at same location in the register. This is not true.
Change-Id: Ieaff07ed8a19e6b4cf1d121a41d3290880b78a82
The bug in the offset correction code for the 'shrink region from
below' case can easily case an assert(foundregion->offset == offset)
to trigger (if the blocks are touched afterwards, e.g. on fork())
as the offsets become wrong. This commit is a fix & regression test.
Change-Id: I28ed403e3891362a2dea674a49e786d3450d2983
We currently have a few of the POSIX tests failing because filemmap
is enabled by default. The working assumption is that these program
pass a pointer to the file server that points to a not yet loaded
data segment. When the file server tries to access that data it
therefore generates a pagefault and a call to itself it can not
handle because it is unable to first return the current call.
Change-Id: Ic1a2d9cd0a542bd950e2b08accb61cfe2855c5a3
Make the kernel server and driver binaries indentical for the different
ARM platforms. We no longer need to define the AM335X or DM37XX flags
during compilation. The remaining differences are all located in u-boot.
Change-Id: I14ac60837dd2d7f116bc5fa56d3989b48d7c4fea
During startup machine.board_id is now determined. The kernel can now
at runtime determine how to configure itself and does so.
Change-Id: I4f615af9bfa5add219e618b911a51af127591d6a
On startup determine the board_id based on the board name
passed from u-boot. This code also export "board" for use
by userland using sysenv.
Change-Id: I1064a49497c82b06f50d98650132bc0a7f543568
