The main motivation for this change is that only Loris supports
multithreading, and Loris supports dynamic thread allocation, so the
number of supported threads can be implemented as a bit flag (i.e.,
either 1 or "at least as many as VFS has"). The ABI break obviates the
need to support file system versioning at this time, and several
other aspects are better implemented as flags as well. Other changes:
- replace peek/bpeek test upon mount with FS flag as well;
- mark libsffs as 64-bit file size capable;
- remove old (3.2.1) getdents support.
Change-Id: I313eace9c50ed816656c31cd47d969033d952a03
- pass in file system type through mount(2), and return this type in
statvfs structures as generated by [f]statvfs(2);
- align mount flags field with NetBSD's, splitting out service flags
which are not to be passed to VFS;
- remove limitation of mount ABI to 16-byte labels, so that labels
can be made larger in the future;
- introduce new m11 message union type for mount(2) as side effect.
Change-Id: I88b7710e297e00a5e4582ada5243d3d5c2801fd9
This is a requirement for implementing calls such as getmntinfo(3).
VFS is now responsible for filling in some of the structure's fields.
Change-Id: I0c1fa78019587efefd2949b3be38cd9a7ddc2ced
The following types are modified (old -> new):
* _BSD_USECONDS_T_ int -> unsigned int
* __socklen_t __int32_t -> __uint32_t
* blksize_t uint32_t -> int32_t
* rlim_t uint32_t -> uint64_t
On ARM:
* _BSD_CLOCK_T_ int -> unsigned int
On Intel:
* _BSD_CLOCK_T_ int -> unsigned long
bin/cat is also updated in order to fix warnings.
_BSD_TIMER_T_ has still to be aligned.
Change-Id: I2b4fda024125a19901120546c4e22e443ba5e9d7
Created a new directory called bsp (board support package) to hold
board or system on chip specific code. The idea is the following.
Change-Id: Ica5886806940facae2fa5492fcc938b3c2b989be
The GPIO revision check assumed the major and minor revision numbers where
located at same location in the register. This is not true.
Change-Id: Ieaff07ed8a19e6b4cf1d121a41d3290880b78a82
The memory-mapped files implementation (mmap() etc.) is implemented with
the help of the filesystems using the in-VM FS cache. Filesystems tell it
about all cached blocks and their metadata. Metadata is: device offset and,
if any (and known), inode number and in-inode offset. VM can then map in
requested memory-mapped file blocks, and request them if necessary.
A limitation of this system is that filesystem block sizes that are not
a multiple of the VM system (and VM hardware) page size are not possible;
we can't map blocks in partially. (We can copy, but then the benefits of
mapping and sharing the physical pages is gone.) So until before this
commit various pieces of caching code assumed page size multiple
blocksizes. This isn't strictly necessary as long as mmap() needn't be
supported on that FS.
This change allows the in-FS cache code (libminixfs) to allocate any-sized
blocks, and will not interact with the VM cache for non-pagesize-multiple
blocks. In that case it will also signal requestors, by failing 'peek'
requests, that mmap() should not be supported on this FS. VM and VFS
will then gracefully fail all file-mapping mmap() calls, and exec() will
fall back to copying executable blocks instead of mmap()ping executables.
As a result, 3 diagnostics that signal file-mapped mmap()s failing
(hitherto an unusual occurence) are disabled, as ld.so does file-mapped
mmap()s to map in objects it needs. On FSes not supporting it this situation
is legitimate and shouldn't cause so much noise. ld.so will revert to its own
minix-specific allocate+copy style of starting executables if mmap()s fail.
Change-Id: Iecb1c8090f5e0be28da8f5181bb35084eb18f67b
* Add _SC_LINE_MAX to unistd.h (value of 15 from NetBSD).
* Add _SC_LINE_MAX case to sysconf(3) in libc.
* usr.bin/nl itself required no Minix specific changes.
Change-Id: I10f056ccdf4f212beb1272f735f41303e5036c05
. initial workaround for assert() firing on iovec
size on ARM. likely due to alloc_contig() allocating
unusually mapped memory in STATICINIT.
. for the same reason use the regular cache i/o functions
to read the superblock in mfs - avoid the alloc_contig()
that STATICINIT does.
Change-Id: I3d8dc635b1cf2666e55b0393feae74cc25b8fed4
When compiling with -O3 gcc seems to be a lot stricter on its checks for
index out of bounds error.
Change-Id: I5a63e1db6aa2375223ff13c6352643a9804fa93d
Many i2c device drivers used similar code to access registers on
the ICs they drive. This commit implements that functionality in
libi2cdriver and updates the drivers to use the library instead of
their own register access functions. The net result is 375+ fewer
lines of code and less work for people developing new drivers.
The two exceptions were cat24c256 and parts of tda19988. They access
the bus in uncommon ways. It doesn't make sense at this time to
move their read/write functions into libi2cdriver.
Change-Id: Id8280b71af33b710a49944d7f20a7262be9f5988
* port libgpio to am335x.
* increase NR_IRQ to 16 to avoid too many IRQs requested error.
* move gpio binary to /sbin (that's where mount looks for drivers).
* fix bug that re-enabled banks that were disabled due to bad revision.
* fix padconf masks for dm37xx in gpio driver (should be 16-bit).
* fix a few typos in README.txt and comments.
Change-Id: I32374415a97135174c5224f76374a870909fa90c
On the AM335X, writes to the padconf registers must be done in privileged
mode. To allow userspace drivers to dynamically change the padconf at
runtime, a kernel call has been added.
Change-Id: I4b25d2879399b1785a360912faa0e90b5c258533
Apparently, qemu's sb16 doesn't reset the interrupt register
of the mixer and the driver ends up in an endless loop when
playing a "multi-fragment" sample.
Change-Id: I47633b99a0d79ba201aec785da69fb3950e026bf
Righ now, the DMA controller will access some random memory below 16 MB,
as the physical address returned by alloc_contig() is simply truncated
when given to the DMA controller.
Yes, it's bad...
. this is OK (although it wastes some memory) as
long as the VM interface isn't used, which has its
own checks in libsys
Change-Id: I28decd367b2cd5c01482bdc71615c65ab61c9a71
for clang, fix warnings in drivers/, lib/, servers/, sys/, common/.
by turning off fatal warnings (takes effect if the default is on),
fixing warnings or reducing the warning level.
Change-Id: Ia1b4bc877c879ba783158081b59aa6ebb021a50f
Previously, all incoming messages would be blocked before a DL_CONF
message arrives from the TCP/IP stack. This however makes it impossible
for a driver to process interrupts before the DL_CONF initialization.
This patch blocks only datalink messages before the initial DL_CONF,
and lets through all other messages to the driver.
Change-Id: I89988958c0bff9bb38e0379b66f6142491a67b61
The VM server now manages its call masks such that all user processes
share the same call mask. As a result, an update for the call mask of
any user process will apply to all user processes. This is similar to
the privilege infrastructure employed by the kernel, and may serve as
a template for similar fine-grained restrictions in other servers.
Concretely, this patch fixes the problem of "service edit init" not
applying the given VM call mask to user processes started from RC
scripts during system startup.
In addition, this patch makes RS set a proper VM call mask for each
recovery script it spawns.
Change-Id: I520a30d85a0d3f3502d2b158293a2258825358cf
To do so, a few dependencies have been imported:
* external/bsd/lutok
* external/mit/lua
* external/public-domain/sqlite
* external/public-domain/xz
The Kyua framework is the new generation of ATF (Automated Test
Framework), it is composed of:
* external/bsd/atf
* external/bsd/kyua-atf-compat
* external/bsd/kyua-cli
* external/bsd/kyua-tester
* tests
Kyua/ATF being written in C++, it depends on libstdc++ which is
provided by GCC. As this is not part of the sources, Kyua is only
compiled when the native GCC utils are installed.
To install Kyua do the following:
* In a cross-build enviromnent, add the following to the build.sh
commandline: -V MKBINUTILS=yes -V MKGCCCMDS=yes
WARNING:
At this point the import is still experimental, and not supported
on native builds (a.k.a make build).
Change-Id: I26aee23c5bbd2d64adcb7c1beb98fe0d479d7ada
