* port libgpio to am335x.
* increase NR_IRQ to 16 to avoid too many IRQs requested error.
* move gpio binary to /sbin (that's where mount looks for drivers).
* fix bug that re-enabled banks that were disabled due to bad revision.
* fix padconf masks for dm37xx in gpio driver (should be 16-bit).
* fix a few typos in README.txt and comments.
Change-Id: I32374415a97135174c5224f76374a870909fa90c
On the AM335X, writes to the padconf registers must be done in privileged
mode. To allow userspace drivers to dynamically change the padconf at
runtime, a kernel call has been added.
Change-Id: I4b25d2879399b1785a360912faa0e90b5c258533
Use EDID when available to configure the frame buffer driver with
good settings for the attached display.
Change-Id: I69a78155a93e55ffa1ca3ff6621a879a56cdbceb
Add support for getting/setting the am335x SoC's internal real
time clock. Also, allow the power off alarm to be set.
Make readclock an "always on" driver. This is needed for setting
power-off alarms whenever the power button is pressed on the BBB.
Replace the readclock.sh script & single run driver with a
readclock program that takes the same arguments and forwards
the requests on to the always up readclock driver.
Change-Id: Ifd6c2acd80ae4b5e79d83df510df445c24e24a71
Increase driver process priority to prevent starvation. Without
special attribute drivers will have the same priority as other
userland processes this. Posix test 1 was taking so much resources
that it triggered alarms in the MMC driver.
Change-Id: Icd3295d8f2a4a284418327a3715641fe9a3b3043
. libc: add vfs_mmap, a way for vfs to initiate mmap()s.
This is a good special case to have as vfs is a slightly
different client from regular user processes. It doesn't do it
for itself, and has the dev & inode info already so the callback
to VFS for the lookup isn't necessary. So it has different info
to have to give to VM.
. libc: also add minix_mmap64() that accepts a 64-bit offset, even
though our off_t is still 32 bit now.
. On exec() time, try to mmap() in the executable if available.
(It is not yet available in this commit.)
. To support mmap(), add do_vm_call that allows VM to lookup
(to ino+dev), do i/o from and close FD's on behalf of other
processes.
Change-Id: I831551e45a6781c74313c450eb9c967a68505932
Primary purpose of change: to support the mmap implementation, VM must
know both (a) about some block metadata for FS cache blocks, i.e.
inode numbers and inode offsets where applicable; and (b) know about
*all* cache blocks, i.e. also of the FS primary caches and not just
the blocks that spill into the secondary one. This changes the
interface and VM data structures.
This change is only for the interface (libminixfs) and VM data
structures; the filesystem code is unmodified, so although the
secondary cache will be used as normal, blocks will not be annotated
with inode information until the FS is modified to provide this
information. Until it is modified, mmap of files will fail gracefully
on such filesystems.
This is indicated to VFS/VM by returning ENOSYS for REQ_PEEK.
Change-Id: I1d2df6c485e6c5e89eb28d9055076cc02629594e
This patch introduces a framebuffer to Minix. It's written for the ARM
port of Minix, but has an architectural split that separates the
hardware dependent part from the non-hardware dependent part. Futhermore,
this driver was developed using a screen that has a native resolution of
1024x600 pixels and having lack of support for obtaining EDID from the
screen. Consequently, it uses a hardcoded resolution of 1024x600.
The driver uses an interface based on the Linux ioctl API, but supports
only a very limited subset.
* Generalize GPIO handling.
* Add libs to configure gpio's clocks and pads
* Add Interrupt handling.
* Introduce mmio.h and log.h
Change-Id: I928e4c807d15031de2eede4b3ecff62df795f8ac
* let busy loops timeout.
* Start using interrupt handlers.
* Allocate the ramdisk only when used.
Change-Id: Ie08d66eefef3c8cd3ee16c04f74a9a50cc12b021
Small GPIO driver that exports a few pins using a virtual file
system. Currently the two user leds and the user button are exported.
Change-Id: I001d017ae27cd17b635587873f7da981054da459
. new mode for sys_memset: include process so memset can be
done in physical or virtual address space.
. add a mode to mmap() that lets a process allocate uninitialized
memory.
. this allows an exec()er (RS, VFS, etc.) to request uninitialized
memory from VM and selectively clear the ranges that don't come
from a file, leaving no uninitialized memory left for the process
to see.
. use callbacks for clearing the process, clearing memory in the
process, and copying into the process; so that the libexec code
can be used from rs, vfs, and in the future, kernel (to load vm)
and vm (to load boot-time processes)
these two functions will be used to support all exec() functionality
going into a single library shared by RS and VFS and exec() knowledge
leaving VM.
. third-party mmap: allow certain processes (VFS, RS) to
do mmap() on behalf of another process
. PROCCTL: used to free and clear a process' address space
. readbios call is now a physical copy with range check in
the kernel call instead of BIOS_SEG+umap_bios
. requires all access to physical memory in bios range to go
through sys_readbios
. drivers/dpeth: wasn't using it
. adjusted printer
- remove PCI tables where system.conf suffices
- remove drivers' ability to mess up NIC order
- fix dp8390 PCI enumeration
- convert ti1225 to instance model
- add system.conf entry for ti1225
Currently, all servers and drivers run as root as they are forks of
RS. srv_fork now tells PM with which credentials to run the resulting
fork. Subsequently, PM lets VFS now as well.
This patch also fixes the following bugs:
- RS doesn't initialize the setugid variable during exec, causing the
servers and drivers to run setuid rendering the srv_fork extension
useless.
- PM erroneously tells VFS to run processes setuid. This doesn't
actually lead to setuid processes as VFS sets {r,e}uid and {r,e}gid
properly before checking PM's approval.
This driver can be loaded as an overlay on top of a real block
device, and can then be used to generate block-level failures for
certain transfer requests. Specifically, a rule-based system allows
the user to introduce (overt and silent) data corruption and errors.
It exposes itself through /dev/fbd, and a file system can be mounted
on top of it. The new fbdctl(8) tool can be used to control the
driver; see ``man fbdctl'' for details. It also comes with a test
set, located in test/fbdtest.
. rc script and service know to look in /usr/pkg/.. for
extra binaries and conf files
. service split into parsing config and doing RS request
so that a new utility (printconfig) can just print the
config in machine-parseable format for netconf integration
. converted all base system eth drivers/netconf
. ipc wants to know about processes that get
signals, so that it can break blocking ipc operations
. doing it for every single signal is wasteful
and causes the annoying 'no slot for signals' message
. this fix tells vm on a per-process basis it (ipc)
wants to be notified, i.e. only when it does any ipc calls
. move ipc config to separate config file while we're at it
sys_umap now supports only:
- looking up the physical address of a virtual address in the address space
of the caller;
- looking up the physical address of a grant for which the caller is the
grantee.
This is enough for nearly all umap users. The new sys_umap_remote supports
lookups in arbitrary address spaces and grants for arbitrary grantees.
Take into account the ALL and ALL_SYS cases when constructing proper
symmetrical IPC send masks. Fix system.conf accordingly, to keep
userland processes from sending to several non-interface servers and
drivers. Also fix IS's F4 formatting.
