A printf statement that only gets compiled when DEBUG_SEM is
defined had a '%' conversion without a corresponding argument.
This patch adds the argument.
Change-Id: I808076f7723baad111ab6fe8a0766d1da4904fd7
This reverts commit 4c87adc85c.
Change-Id: I469fbbe6f49802cb86d81b059cb454d967f47079
Reason: Introduces new device nodes and removes old devices nodes which where unintended at this point.
When compiling with -O3 gcc seems to be a lot stricter on its checks for
index out of bounds error.
Change-Id: I5a63e1db6aa2375223ff13c6352643a9804fa93d
test75 sometimes false-fails if something else is going on
at the same time, presumably because the child doesn't spin
enough to register a nonzero getrusage() cpu time value, as
spin() uses the real time to limit the spinning.
this change forces spin() to do a minimum amount of spinning
before exiting, regardless of scheduling.
Change-Id: I57c63d22969bba418f36bcc8c5ace2b6fb445968
Define the file name templates as char arrays to prevent the
toolchain from mapping them read-only.
Change-Id: Ib2395587b62d4a6ff19c88adc4246dcb41344a53
. make filesystems on primary partitions to make it
easier on the minix partition util
. so sfdisk isn't required as an external tool
. also make partition and hitherto x86-only utilities
arch-independent
Change-Id: Ib4e07e45d038d084dde1858917d3deb7f0616532
Before this change overflowing the free running clock counter
between the time the timer was read and the time the overflow
check was done resulted in read_tsc_64 returning a to high value.
Change-Id: I1022f271213647f720477c4121d45f0c965456c6
When we start using a new pagetable (for a new process)
the last part is to ensure the pagetable itself can be
accessed by VM. This is done in pt_bind by updating
the "pagetable of pagetables" and we want this mapping
to match other mappings to the l1 pagetable.
Change-Id: I7b506fd75553917fdc1abd25b55e4b2f25ccbf8d
When copying data from cacheable memory also use cacheable
attributes when creating temporary mappings.
Change-Id: I0e8380293fb4edaafba49f6262983ad86a5350c5
* Allow to change the timer frequency using the hz paramter.
* Unmask the interrupt only after registering the handler.
* Pass the hz parameter in the command line.
A script that creates a HD image ready to be booted by an x86
emulator, ready to work in a crossbuild environment.
It's really just for qemu/kvm as there's no boot code in
the MBR and no bootloader installed so we rely on the in-kvm
multiboot implementation for now. This is very convenient for
passing args too.
To minimize reliance on external tools, we use the Minix
'partition' utility to write the partition table of the HD
image, which therefore has to be compiled natively.
. new script releasetools/x86_hdimage.sh
. natively compile minix 'partition' utility
. make <machine/partition.h> 64-bit safe for it
Change-Id: If645b4691536752271e0b8a8ed59a34f248dace4
. add dependency of headers on debug.d
. put the generated headers in the right dir
. also resilience against future ELAST duplicate errno
Change-Id: I9d10702c8e09699a40138193f14defe902399da6
The sht21 temperature and humidity sensor holds the i2c bus while
an ADC conversion is in progress. For example, a temperature
measurement is requested, a read operation is started, and the
sht21 doesn't respond to the read request until the result of
the measurement is ready. The conversion time isn't constant.
On rare occations (one in hundreds of samples) the timeout in the
i2c driver expires returning an error.
The example code from Sensirion, the sht21's manufacturer, suggests
a bus timeout of 1 second to accommodate the sht21. This commit
increases the bus timeout to 1 second. The timeout is only reached
when chips do not respond normally, so the change doesn't affect the
performance of any other drivers.
Change-Id: I57b0f958a5d0b69b221af380b771fe67401ff604
Many i2c device drivers used similar code to access registers on
the ICs they drive. This commit implements that functionality in
libi2cdriver and updates the drivers to use the library instead of
their own register access functions. The net result is 375+ fewer
lines of code and less work for people developing new drivers.
The two exceptions were cat24c256 and parts of tda19988. They access
the bus in uncommon ways. It doesn't make sense at this time to
move their read/write functions into libi2cdriver.
Change-Id: Id8280b71af33b710a49944d7f20a7262be9f5988
A copy and paste error caused a few lines of code to be duplicated.
This patch removes the excess code.
Change-Id: I7313efb537e2a4102fb25ce05782e82ae0c84285
To provide EDID to fb, the TDA19988 implements the block device
protocol with libblockdriver. To properly use the library,
blockdriver_announce() should be called by the driver.
Issue reported by David van Moolenbroek
Change-Id: Id55d159d91502a9afac5c1d4de0fee1e8945b5c1
This is done by adding a dependency on ${GNUHOSTDIST:H}/.gitignore
for both realall and realinstall targets.
Change-Id: If086a6c02ab20a8cd4bbb3597d7203cf22dce796
. full number was needed to reliably trigger the race
condition
. takes a bit too long (7 mins on fast x86 hardware) for a
condition that "can't" happen again, so let's cut the iteration
count and trust that the test will trigger soon enough for
a similar condition in the future.
Change-Id: I2d38b87c25327adbbff91b7db6191648aa1dd8fd
. turns on mmap() functionality for files by default
. also causes exec() to use it to map in executables
without copying and with sharing those pages with the
disk cache and other instances of the executable
Change-Id: Idb94dfe110eed916cf83b12c45e1a77241a2cee5
As they can come anytime upon receipt of interrupt by the ethernet driver. This
is the same thing as is done for CONF replies.
A simple test case would be the following via ssh connection:
while getaddr; do :; done
Change-Id: I68f4403360b3eefe67fc602c4855ca1abd649475
According to the virtio specifications, the host present the supported
features to the guest, and the guest should answer woth the features it
supports. This allows the host to disable support for features that the
guest is not going to use.
Minix tells to the host it doesn't support any extended features, while
it uses at least VIRTIO_NET_F_MAC and VIRTIO_NET_F_CTRL_VQ. For the
latter it seems it only allocate the queue while not using it later.
However starting with QEMU 1.4.0, with multiqueue support added, the
control queue is not allocated on the host side if the guest doesn't
tell it supports this feature. This cause virtio-net to crash on the
Minix side.
This patch fixes that by correctly telling the features that are
used by the Minix guest for more than printing a debug message. This
fixes virtio-net on QEMU 1.4.x.
Change-Id: I8bbf757c09d24e0f5fe5835531a1c9203b714bd7
