. split user-editable and system-owned files in etc/Makefile
. mtab is a symlink, not a file now; remove it
. force-install of certain system-controlled /etc files from
top Makefile
. rename /etc/make.conf to /etc/mk.conf; and don't set $ARCH;
reduce difference in bsd.own.mk
Change-Id: I9f4bbb8d37ba80cba7dcfcf1a9a89e934910f579
Install /home/ast and /home/bin as part of the system build procedure,
as the setup script is not ran on the arm image.
/home/bin is needed for successful completion of our test suite.
This patch does not change the setup script, as it is not bothered by
those files/directiories being already there, and may be useful during
reinstallation on intel systems.
Change-Id: I358c881df09223c343442673aa0822937f9ea33c
To use the new SD building script, Linux has to be configured with
loop.max_part=15 on the command line (or set at module load time)
to make the loopback device see the partitions.
This commit removes a lot of differences between the ARM and x86
boot ramdisk and rc scripts. It changes the ARM build from running
from ramdisk to requiring a full filesystem on the SD image and
booting into it.
. ramdisk: remove some arm-only utilities only used for running
from the shell
. remove ARM-only rc.arm, proto.arm.small, ttys and mylogin.sh
boot-time ramdisk files
. change kernel to add "arch" variable so userland knows what
we're running on from sysenv
. make ARM use the regular ramdisk rc file, changed to distinguish
i386-only and ARM-only drivers; requires rootdevname to be set
. change /etc/rc and /usr/etc/rc to start i386-only drivers only on
i386 systems
. change the kernel/arm to have a special case for the memory
driver to load it higher so it can be bigger
. add uEnv.txt, cmdline.txt and a for now highly linux-dependent
SD preparation script arm_sdimage.sh to the git repository in
releasetools/
Change-Id: I68910ba4e96ee80f7a12b65e48b5d39b43ca6397
LSC: Small correction, using the group name is not secure in cross-build
setups, replaced by the numerical gid to ensure proper operation.
Change-Id: I7657b77f29eaa513fe24d8c4e2eb6de9afd53950
This patch introduces a framebuffer to Minix. It's written for the ARM
port of Minix, but has an architectural split that separates the
hardware dependent part from the non-hardware dependent part. Futhermore,
this driver was developed using a screen that has a native resolution of
1024x600 pixels and having lack of support for obtaining EDID from the
screen. Consequently, it uses a hardcoded resolution of 1024x600.
The driver uses an interface based on the Linux ioctl API, but supports
only a very limited subset.
* Generalize GPIO handling.
* Add libs to configure gpio's clocks and pads
* Add Interrupt handling.
* Introduce mmio.h and log.h
Change-Id: I928e4c807d15031de2eede4b3ecff62df795f8ac
* let busy loops timeout.
* Start using interrupt handlers.
* Allocate the ramdisk only when used.
Change-Id: Ie08d66eefef3c8cd3ee16c04f74a9a50cc12b021
Also did some cleanup in ash sources, to make minix modifications
more obvious, as well as some simplifications (by removing code which
is never compiled)
Removed EDITLINE support, use libedit, which does the termcap/terminfo
handling.
Change-Id: I19f7f425ed6a61298844631f9d7f3173cf7f30c0
Small GPIO driver that exports a few pins using a virtual file
system. Currently the two user leds and the user button are exported.
Change-Id: I001d017ae27cd17b635587873f7da981054da459
The way etcfiles was re-implemented was wrong as it would overwrite the
password database. This patch adds back a proper etcfiles (safe) target,
and a etcforce (unsafe) target.
Change-Id: I141c37b29a449fca1ee362b7416750be0298dbfb
With the build system upgrade, the list of system directories was
recreated, and the sticky bit was forgotten.
Change-Id: Ie2f2241734dde9f1e217cd38588296dc21d07b81
* Remade patch so it works with minix patch tool.
* New MINIX tar support -ox, so revert back to it
In fetch scripts, tar had been replaced by bsdtar as the prebvious
tar did not support the -o flag under minix, which is required to
prevent usage of tar file stored user and group information.
This introduces portability problems. As our new tar tool now
support that flag revert back to improve portability.
upgrade to NetBSD CVS release from 2012/10/17 12:00:00 UTC
Makefiles updates to imporve portability
Made sure to be consistent in the usage of braces/parenthesis at
least on a per file basis. For variables, it is recommended to
continue to use braces.
The tested targets are the followgin ones:
* tools
* distribution
* sets
* release
The remaining NetBSD targets have not been disabled nor tested
*at all*. Try them at your own risk, they may reboot the earth.
For all compliant Makefiles, objects and generated files are put in
MAKEOBJDIR, which means you can now keep objects between two branch
switching. Same for DESTDIR, please refer to build.sh options.
Regarding new or modifications of Makefiles a few things:
* Read share/mk/bsd.README
* If you add a subdirectory, add a Makefile in it, and have it called
by the parent through the SUBDIR variable.
* Do not add arbitrary inclusion which crosses to another branch of
the hierarchy; If you can't do without it, put a comment on why.
If possible, do not use inclusion at all.
* Use as much as possible the infrastructure, it is here to make
life easier, do not fight it.
Sets and package are now used to track files.
We have one set called "minix", composed of one package called "minix-sys"
Bumping libc files for unsupported architectures, to simplify merging.
A bunch of small fixes:
* in libutil update
* the macro in endian.h
* some undefined types due to clear separation from host.
* Fix a warning for cdbr.c
Some modification which were required for the new build system:
* inclusion path for const.h in sconst, still hacky
* Removed default malloc.c which conflicts on some occasions.
- inherit a predefined set of system environment variables
(the current set of inherited variables is: ahci; acpi; no_apic);
- auto-adjust the default menu option when lines are auto-removed;
- add variable substitution support for /etc/boot.cfg.local;
- make default menu options in boot.cfg.local relative to itself,
allowing one to set the default to a menu option from this file.
- add "edit" menu option, to edit menu commands before executing them;
- add "menu" boot command, to return to the menu from the prompt;
- provide more line editing features when getting input;
- fix a few potential buffer overflows as a side effect.
complete munmap implementation; single-page references made
a general munmap() implementation possible to write cleanly.
. memory: let the MIOCRAMSIZE ioctl set the imgrd device
size (but only to 0)
. let the ramdisk command set sizes to 0
. use this command to set /dev/imgrd to 0 after mounting /usr
in /etc/rc, so the boot time ramdisk is freed (about 4MB
currently)
The rc script manually parses /etc/fstab to mount all file systems.
To do that it needs /bin/sed which does not exist anymore. mount(8)
now supports the -a flag which causes it to mount all file systems
listed in /etc/fstab except for '/'. File systems marked with 'noauto'
are skipped.
Adding hot plugging infrastructure in rc file. This includes
starting the devman service, mounting it's file system and
starting the corresponding devmand daemon.
This patch also provide error free shutdown of the USB sub-system.
The USB sub system needs to be shutdown in a certain order but also
consists of components living in /usr/pkg/. By checking the
existence of usbd we can stop it in the correct order.
