Upgrading build system to new NetBSD revision

The tested targets are the followgin ones: * tools * distribution * sets * release The remaining NetBSD targets have not been disabled nor tested *at all*. Try them at your own risk, they may reboot the earth. For all compliant Makefiles, objects and generated files are put in MAKEOBJDIR, which means you can now keep objects between two branch switching. Same for DESTDIR, please refer to build.sh options. Regarding new or modifications of Makefiles a few things: * Read share/mk/bsd.README * If you add a subdirectory, add a Makefile in it, and have it called by the parent through the SUBDIR variable. * Do not add arbitrary inclusion which crosses to another branch of the hierarchy; If you can't do without it, put a comment on why. If possible, do not use inclusion at all. * Use as much as possible the infrastructure, it is here to make life easier, do not fight it. Sets and package are now used to track files. We have one set called "minix", composed of one package called "minix-sys"
2012-09-12 09:37:05 +02:00 · 2012-09-12 09:37:05 +02:00 · 9152e1c5a7
parent bdb3f57135
commit 9152e1c5a7
609 changed files with 113178 additions and 1553 deletions
--- a/615
+++ b/615
@ -1,123 +1,530 @@
-# Master Makefile to compile everything in /usr/src except the system.
+#	$NetBSD: Makefile,v 1.299 2012/08/17 16:22:27 joerg Exp $
+
+#
+# This is the top-level makefile for building NetBSD. For an outline of
+# how to build a snapshot or release, as well as other release engineering
+# information, see http://www.NetBSD.org/developers/releng/index.html
+#
+# Not everything you can set or do is documented in this makefile. In
+# particular, you should review the files in /usr/share/mk (especially
+# bsd.README) for general information on building programs and writing
+# Makefiles within this structure, and see the comments in src/etc/Makefile
+# for further information on installation and release set options.
+#
+# Variables listed below can be set on the make command line (highest
+# priority), in /etc/mk.conf (middle priority), or in the environment
+# (lowest priority).
+#
+# Variables:
+#   DESTDIR is the target directory for installation of the compiled
+#	software. It defaults to /. Note that programs are built against
+#	libraries installed in DESTDIR.
+#   MKMAN, if `no', will prevent building of manual pages.
+#   MKOBJDIRS, if not `no', will build object directories at
+#	an appropriate point in a build.
+#   MKSHARE, if `no', will prevent building and installing
+#	anything in /usr/share.
+#   MKUPDATE, if not `no', will avoid a `make cleandir' at the start of
+#	`make build', as well as having the effects listed in
+#	/usr/share/mk/bsd.README.
+#   NOCLEANDIR, if defined, will avoid a `make cleandir' at the start
+#	of the `make build'.
+#   NOINCLUDES will avoid the `make includes' usually done by `make build'.
+#
+#   See mk.conf(5) for more details.
+#
+#
+# Targets:
+#   build:
+#	Builds a full release of NetBSD in DESTDIR, except for the
+#	/etc configuration files.
+#	If BUILD_DONE is set, this is an empty target.
+#   distribution:
+#	Builds a full release of NetBSD in DESTDIR, including the /etc
+#	configuration files.
+#   buildworld:
+#	As per `make distribution', except that it ensures that DESTDIR
+#	is not the root directory.
+#   installworld:
+#	Install the distribution from DESTDIR to INSTALLWORLDDIR (which
+#	defaults to the root directory).  Ensures that INSTALLWORLDDIR
+#	is not the root directory if cross compiling.
+#   release:
+#	Does a `make distribution', and then tars up the DESTDIR files
+#	into ${RELEASEDIR}/${RELEASEMACHINEDIR}, in release(7) format.
+#	(See etc/Makefile for more information on this.)
+#   regression-tests:
+#	Runs the regression tests in "regress" on this host.
+#   sets:
+#	Populate ${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/sets
+#	from ${DESTDIR}
+#   sourcesets:
+#	Populate ${RELEASEDIR}/source/sets from ${NETBSDSRCDIR}
+#   syspkgs:
+#	Populate ${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/syspkgs
+#	from ${DESTDIR}
+#   iso-image:
+#	Create CD-ROM image in RELEASEDIR/iso.
+#	RELEASEDIR must already have been populated by `make release'
+#	or equivalent.
+#   iso-image-source:
+#	Create CD-ROM image with source in RELEASEDIR/iso.
+#	RELEASEDIR must already have been populated by
+#	`make release sourcesets' or equivalent.
+#   live-image:
+#	Create bootable live image for emulators or USB stick etc.
+#	in RELEASEDIR/liveimage.
+#	RELEASEDIR must already have been populated by `make release'
+#	or equivalent.
+#   install-image:
+#	Create bootable installation image for USB stick etc.
+#	in RELEASEDIR/installimage.
+#	RELEASEDIR must already have been populated by `make release'
+#	or equivalent.
+#
+# Targets invoked by `make build,' in order:
+#   cleandir:        cleans the tree.
+#   do-top-obj:      creates the top level object directory.
+#   do-tools-obj:    creates object directories for the host toolchain.
+#   do-tools:        builds host toolchain.
+#   obj:             creates object directories.
+#   do-distrib-dirs: creates the distribution directories.
+#   includes:        installs include files.
+#   do-tools-compat: builds the "libnbcompat" library; needed for some
+#                    random host tool programs in the source tree.
+#   do-lib:          builds and installs prerequisites from lib
+#                    if ${MKCOMPAT} != "no".
+#   do-compat-lib:   builds and installs prerequisites from compat/lib
+#                    if ${MKCOMPAT} != "no".
+#   do-build:        builds and installs the entire system.
+#   do-x11:          builds and installs X11 if ${MKX11} != "no"; either
+#                    X11R7 from src/external/mit/xorg if ${X11FLAVOUR} == "Xorg"
+#                    or X11R6 from src/x11
+#   do-extsrc:       builds and installs extsrc if ${MKEXTSRC} != "no".
+#   do-obsolete:     installs the obsolete sets (for the postinstall-* targets).
+#
+
+.if ${.MAKEFLAGS:M${.CURDIR}/share/mk} == ""
+.MAKEFLAGS: -m ${.CURDIR}/share/mk
+.endif
+
+#
+# If _SRC_TOP_OBJ_ gets set here, we will end up with a directory that may
+# not be the top level objdir, because "make obj" can happen in the *middle*
+# of "make build" (long after <bsd.own.mk> is calculated it).  So, pre-set
+# _SRC_TOP_OBJ_ here so it will not be added to ${.MAKEOVERRIDES}.
+#
+_SRC_TOP_OBJ_=

 .include <bsd.own.mk>

-MAKE?=make
+#
+# Sanity check: make sure that "make build" is not invoked simultaneously
+# with a standard recursive target.
+#

-usage:
-	@echo "" 
-	@echo "Master Makefile for MINIX commands and utilities." 
-	@echo "Root privileges are required for some actions." 
-	@echo "" 
-	@echo "Usage:" 
-	@echo "	make world         # Compile everything (libraries & commands)"
-	@echo "	make includes      # Install include files from src/"
-	@echo "	make libraries     # Compile and install libraries"
-	@echo "	make commands      # Compile all, commands, but don't install"
-	@echo "	make install       # Compile and install commands"
-	@echo "	make clean         # Remove all compiler results"
-	@echo "" 
-	@echo "Run 'make' in releasetools/ to create a new MINIX configuration."
-	@echo "" 
+.if make(build) || make(release) || make(snapshot)
+.for targ in ${TARGETS:Nobj:Ncleandir}
+.if make(${targ}) && !target(.BEGIN)
+.BEGIN:
+	@echo 'BUILD ABORTED: "make build" and "make ${targ}" are mutually exclusive.'
+	@false
+.endif
+.endfor
+.endif

-# world has to be able to make a new system, even if there
-# is no complete old system. it has to install commands, for which
-# it has to install libraries, for which it has to install includes,
-# for which it has to install /etc (for users and ownerships).
-# etcfiles also creates a directory hierarchy in its
-# 'make install' target.
-# 
+#
+# _SUBDIR is used to set SUBDIR, after removing directories that have
+# BUILD_${dir}=no, or that have no ${dir}/Makefile.
+#
+_SUBDIR=	tools lib include gnu external crypto/external bin games
+_SUBDIR+=	libexec sbin usr.bin
+_SUBDIR+=	commands man
+_SUBDIR+=	common drivers kernel servers
+_SUBDIR+=	usr.sbin share rescue sys etc tests compat .WAIT distrib regress

-# etcfiles has to be done first.
-
-distribution: etcfiles includes mkfiles libraries do-libgcc .WAIT dep-all install etcforce
-
-do-libgcc: .PHONY .MAKE
-	${MAKEDIRTARGET} external/gpl3/gcc/lib/libgcc/libgcc all
-	${MAKEDIRTARGET} external/gpl3/gcc/lib/libgcc/libgcc install
-
-world: mkfiles etcfiles includes libraries dep-all install etcforce
-
-# subdirs where userland utilities and other executables live
-CMDSDIRS=commands bin sbin usr.bin usr.sbin libexec external
-
-# subdirs where system stuff lives
-SYSDIRS=sys kernel servers drivers
-
-# combination
-CMDSYSDIRS=$(CMDSDIRS) $(SYSDIRS)
-
-etcfiles: .PHONY .MAKE
-	${MAKEDIRTARGET} etc install
-
-etcforce: .PHONY .MAKE
-	${MAKEDIRTARGET} etc installforce
-
-mkfiles: .PHONY .MAKE
-	${MAKEDIRTARGET} share/mk install
-
-includes: .PHONY .MAKE
-	${MAKEDIRTARGET} include includes
-	${INSTALL_DIR} ${DESTDIR}/usr/include/g++
-	${MAKEDIRTARGET} lib includes
-	${MAKEDIRTARGET} sys includes
-	${MAKEDIRTARGET} external includes
-
-.for dir in lib lib/csu lib/libc
-do-${dir:S/\//-/g}: .PHONY .MAKE
-	${MAKEDIRTARGET} ${dir} dependall
-	${MAKEDIRTARGET} ${dir} install
+.for dir in ${_SUBDIR}
+.if "${dir}" == ".WAIT" \
+	|| (${BUILD_${dir}:Uyes} != "no" && exists(${dir}/Makefile))
+SUBDIR+=	${dir}
+.endif
 .endfor

-# libraries are built by building and installing csu, then libc, then
-# the rest
-libraries: includes .PHONY .MAKE do-lib-csu .WAIT do-lib-libc .WAIT do-lib
+.if exists(regress)
+regression-tests: .PHONY .MAKE
+	@echo Running regression tests...
+	${MAKEDIRTARGET} regress regress
+.endif

-commands: includes libraries .PHONY .MAKE 
-.for dir in $(CMDSDIRS)
-	${MAKEDIRTARGET} ${dir} dependall
-.endfor
+.if ${MKUNPRIVED} != "no"
+NOPOSTINSTALL=	# defined
+.endif

-dep-all: .PHONY .MAKE
-.for dir in $(CMDSYSDIRS)
-	${MAKEDIRTARGET} ${dir} dependall
-.endfor
-
-install: .PHONY .MAKE
-.for dir in $(CMDSYSDIRS)
-	${MAKEDIRTARGET} ${dir} install
-.endfor
-	${MAKEDIRTARGET} man install
+afterinstall: .PHONY .MAKE
+.if ${MKMAN} != "no"
+.if !defined(__MINIX)
+	${MAKEDIRTARGET} share/man makedb
+.else
 	${MAKEDIRTARGET} man makedb
-	${MAKEDIRTARGET} share install
-	${MAKEDIRTARGET} releasetools install
+.endif # !defined(__MINIX)
+.endif
+.if !defined(__MINIX)
+.if (${MKUNPRIVED} != "no" && ${MKINFO} != "no")
+	${MAKEDIRTARGET} gnu/usr.bin/texinfo/install-info infodir-meta
+.endif
+.endif # !defined(__MINIX)
+.if !defined(NOPOSTINSTALL)
+	${MAKEDIRTARGET} . postinstall-check
+.endif

-clean: mkfiles .PHONY .MAKE
-.for dir in $(CMDSDIRS)
-	${MAKEDIRTARGET} ${dir} clean
+_POSTINSTALL=	${.CURDIR}/usr.sbin/postinstall/postinstall
+_POSTINSTALL_ENV= \
+	AWK=${TOOL_AWK:Q}		\
+	DB=${TOOL_DB:Q}			\
+	HOST_SH=${HOST_SH:Q}		\
+	MAKE=${MAKE:Q}			\
+	PWD_MKDB=${TOOL_PWD_MKDB:Q}	\
+	STAT=${TOOL_STAT:Q}
+
+postinstall-check: .PHONY
+	@echo "   === Post installation checks ==="
+	${_POSTINSTALL_ENV} ${HOST_SH} ${_POSTINSTALL} -s ${.CURDIR} -d ${DESTDIR}/ check; if [ $$? -gt 1 ]; then exit 1; fi
+	@echo "   ================================"
+
+postinstall-fix: .NOTMAIN .PHONY
+	@echo "   === Post installation fixes ==="
+	${_POSTINSTALL_ENV} ${HOST_SH} ${_POSTINSTALL} -s ${.CURDIR} -d ${DESTDIR}/ fix
+	@echo "   ==============================="
+
+postinstall-fix-obsolete: .NOTMAIN .PHONY
+	@echo "   === Removing obsolete files ==="
+	${_POSTINSTALL_ENV} ${HOST_SH} ${_POSTINSTALL} -s ${.CURDIR} -d ${DESTDIR}/ fix obsolete
+	@echo "   ==============================="
+
+
+#
+# Targets (in order!) called by "make build".
+#
+.if defined(HAVE_GCC)
+.if ${HAVE_GCC} == "4"
+LIBGCC_EXT=4
+BUILD_CC_LIB_BASEDIR= gnu/lib
+BUILD_CC_LIB_BASETARGET= gnu-lib
+.else
+LIBGCC_EXT=
+BUILD_CC_LIB_BASEDIR= external/gpl3/gcc/lib
+BUILD_CC_LIB_BASETARGET= external-gpl3-gcc-lib
+.endif
+.endif
+
+BUILDTARGETS+=	check-tools
+.if ${MKUPDATE} == "no" && !defined(NOCLEANDIR)
+BUILDTARGETS+=	cleandir
+.endif
+.if ${MKOBJDIRS} != "no"
+BUILDTARGETS+=	do-top-obj
+.endif
+.if ${USETOOLS} == "yes"	# {
+.if ${MKOBJDIRS} != "no"
+BUILDTARGETS+=	do-tools-obj
+.endif
+BUILDTARGETS+=	do-tools
+.endif # USETOOLS		# }
+.if ${MKOBJDIRS} != "no"
+BUILDTARGETS+=	obj
+.endif
+BUILDTARGETS+=	clean_METALOG
+.if !defined(NODISTRIBDIRS)
+BUILDTARGETS+=	do-distrib-dirs
+.endif
+.if !defined(NOINCLUDES)
+BUILDTARGETS+=	includes
+.endif
+BUILDTARGETS+=	do-lib
+.if !defined(__MINIX)
+# LSC Not used in MINIX3
+BUILDTARGETS+=	do-compat-lib
+.endif # !defiend(__MINIX)
+BUILDTARGETS+=	do-build
+.if ${MKX11} != "no"
+BUILDTARGETS+=	do-x11
+.endif
+.if ${MKEXTSRC} != "no"
+BUILDTARGETS+=	do-extsrc
+.endif
+BUILDTARGETS+=	do-obsolete
+
+#
+# Enforce proper ordering of some rules.
+#
+
+.ORDER:		${BUILDTARGETS}
+includes-lib:	.PHONY includes-include includes-sys
+includes-gnu:	.PHONY includes-lib
+
+#
+# Build the system and install into DESTDIR.
+#
+
+START_TIME!=	date
+
+build: .PHONY .MAKE
+.if defined(BUILD_DONE)
+	@echo "Build already installed into ${DESTDIR}"
+.else
+	@echo "Build started at: ${START_TIME}"
+.for tgt in ${BUILDTARGETS}
+	${MAKEDIRTARGET} . ${tgt}
 .endfor
-	${MAKEDIRTARGET} sys clean
-	${MAKEDIRTARGET} releasetools clean
-	${MAKEDIRTARGET} lib clean
-	${MAKEDIRTARGET} test clean
+	${MAKEDIRTARGET} etc install-etc-release
+	@echo   "Build started at:  ${START_TIME}"
+	@printf "Build finished at: " && date
+.endif

-cleandepend: mkfiles .PHONY .MAKE
-.for dir in $(CMDSYSDIRS)
-	${MAKEDIRTARGET} ${dir} cleandepend
+#
+# Build a full distribution, but not a release (i.e. no sets into
+# ${RELEASEDIR}).  "buildworld" enforces a build to ${DESTDIR} != /
+#
+
+distribution buildworld: .PHONY .MAKE
+.if make(buildworld) && \
+    (!defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/")
+	@echo "Won't make ${.TARGET} with DESTDIR=/"
+	@false
+.endif
+	${MAKEDIRTARGET} . build NOPOSTINSTALL=1
+	${MAKEDIRTARGET} etc distribution INSTALL_DONE=1
+.if defined(__MINIX)
+	${MAKEDIRTARGET} releasetools hdboot
+.endif # defined(__MINIX)
+.if defined(DESTDIR) && ${DESTDIR} != "" && ${DESTDIR} != "/"
+	${MAKEDIRTARGET} . postinstall-fix-obsolete
+	${MAKEDIRTARGET} distrib/sets checkflist
+.endif
+	@echo   "make ${.TARGET} started at:  ${START_TIME}"
+	@printf "make ${.TARGET} finished at: " && date
+
+#
+# Install the distribution from $DESTDIR to $INSTALLWORLDDIR (defaults to `/')
+# If installing to /, ensures that the host's operating system is NetBSD and
+# the host's `uname -m` == ${MACHINE}.
+#
+
+HOST_UNAME_S!=	uname -s
+.if ${HOST_OSTYPE:C/\-.*//} != "Minix"
+HOST_UNAME_M!=	uname -m
+.else
+HOST_UNAME_M:= ${MACHINE}
+.endif
+
+installworld: .PHONY .MAKE
+.if (!defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/")
+	@echo "Can't make ${.TARGET} to DESTDIR=/"
+	@false
+.endif
+.if !defined(INSTALLWORLDDIR) || \
+    ${INSTALLWORLDDIR} == "" || ${INSTALLWORLDDIR} == "/"
+.if (${HOST_UNAME_S} != "Minix")
+	@echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_S} to Minix with INSTALLWORLDDIR=/"
+	@false
+.endif
+.if (${HOST_UNAME_M} != ${MACHINE})
+	@echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_M} to ${MACHINE} with INSTALLWORLDDIR=/"
+	@false
+.endif
+.endif
+	${MAKEDIRTARGET} distrib/sets installsets \
+		INSTALLDIR=${INSTALLWORLDDIR:U/} INSTALLSETS=${INSTALLSETS:Q}
+	${MAKEDIRTARGET} . postinstall-check DESTDIR=${INSTALLWORLDDIR}
+	@echo   "make ${.TARGET} started at:  ${START_TIME}"
+	@printf "make ${.TARGET} finished at: " && date
+
+#
+# Install modules from $DESTDIR to $INSTALLMODULESDIR
+#
+installmodules: .PHONY .MAKE
+.if (!defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/")
+	@echo "Can't make ${.TARGET} to DESTDIR=/"
+	@false
+.endif
+.if !defined(INSTALLMODULESDIR) || \
+    ${INSTALLMODULESDIR} == "" || ${INSTALLMODULESDIR} == "/"
+.if (${HOST_UNAME_S} != "NetBSD")
+	@echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_S} to NetBSD with INSTALLMODULESDIR=/"
+	@false
+.endif
+.if (${HOST_UNAME_M} != ${MACHINE})
+	@echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_M} to ${MACHINE} with INSTALLMODULESDIR=/"
+	@false
+.endif
+.endif
+	${MAKEDIRTARGET} sys/modules install DESTDIR=${INSTALLMODULESDIR:U/}
+	@echo   "make ${.TARGET} started at:  ${START_TIME}"
+	@printf "make ${.TARGET} finished at: " && date
+
+#
+# Create sets from $DESTDIR or $NETBSDSRCDIR into $RELEASEDIR
+#
+
+.for tgt in sets sourcesets syspkgs
+${tgt}: .PHONY .MAKE
+	${MAKEDIRTARGET} distrib/sets ${tgt}
 .endfor
-	${MAKEDIRTARGET} lib cleandepend

-# Shorthands
-all: .PHONY .MAKE dep-all
-	${MAKEDIRTARGET} releasetools all
+#
+# Build a release or snapshot (implies "make distribution").  Note that
+# in this case, the set lists will be checked before the tar files
+# are made.
+#

-# Obsolete targets
-elf-libraries: .PHONY
-	echo "That target is just libraries now."
-	false
+release snapshot: .PHONY .MAKE
+	${MAKEDIRTARGET} . distribution
+	${MAKEDIRTARGET} etc release DISTRIBUTION_DONE=1
+	@echo   "make ${.TARGET} started at:  ${START_TIME}"
+	@printf "make ${.TARGET} finished at: " && date

-gnu-includes: .PHONY
-	echo "That target is obsolete."
-	echo "Current MINIX GCC packages don't require it any more."
-	false
+#
+# Create a CD-ROM image.
+#

+iso-image: .PHONY
+	${MAKEDIRTARGET} distrib iso_image
+	${MAKEDIRTARGET} etc iso-image
+	@echo   "make ${.TARGET} started at:  ${START_TIME}"
+	@printf "make ${.TARGET} finished at: " && date
+
+iso-image-source: .PHONY
+	${MAKEDIRTARGET} distrib iso_image CDSOURCE=true
+	${MAKEDIRTARGET} etc iso-image
+	@echo   "make ${.TARGET} started at:  ${START_TIME}"
+	@printf "make ${.TARGET} finished at: " && date
+
+#
+# Create bootable live images.
+#
+
+live-image: .PHONY
+	${MAKEDIRTARGET} etc live-image
+	@echo   "make ${.TARGET} started at:  ${START_TIME}"
+	@printf "make ${.TARGET} finished at: " && date
+
+#
+# Create bootable installation images.
+#
+
+install-image: .PHONY
+	${MAKEDIRTARGET} etc install-image
+	@echo   "make ${.TARGET} started at:  ${START_TIME}"
+	@printf "make ${.TARGET} finished at: " && date
+
+#
+# Special components of the "make build" process.
+#
+
+check-tools: .PHONY
+.if ${TOOLCHAIN_MISSING} != "no" && !defined(EXTERNAL_TOOLCHAIN)
+	@echo '*** WARNING:  Building on MACHINE=${MACHINE} with missing toolchain.'
+	@echo '*** May result in a failed build or corrupt binaries!'
+.elif defined(EXTERNAL_TOOLCHAIN)
+	@echo '*** Using external toolchain rooted at ${EXTERNAL_TOOLCHAIN}.'
+.endif
+.if defined(NBUILDJOBS)
+	@echo '*** WARNING: NBUILDJOBS is obsolete; use -j directly instead!'
+.endif
+
+# Delete or sanitise a leftover METALOG from a previous build.
+clean_METALOG: .PHONY .MAKE
+.if ${MKUPDATE} != "no"
+	${MAKEDIRTARGET} distrib/sets clean_METALOG
+.endif
+
+do-distrib-dirs: .PHONY .MAKE
+.if !defined(DESTDIR) || ${DESTDIR} == ""
+	${MAKEDIRTARGET} etc distrib-dirs DESTDIR=/
+.else
+	${MAKEDIRTARGET} etc distrib-dirs DESTDIR=${DESTDIR}
+.endif
+
+.for targ in cleandir obj includes
+do-${targ}: .PHONY ${targ}
+	@true
+.endfor
+
+.for dir in tools tools/compat
+do-${dir:S/\//-/g}: .PHONY .MAKE
+.for targ in dependall install
+	${MAKEDIRTARGET} ${dir} ${targ}
+.endfor
+.endfor
+
+do-lib: .PHONY .MAKE
+	${MAKEDIRTARGET} lib build_install
+
+do-compat-lib: .PHONY .MAKE
+	${MAKEDIRTARGET} compat build_install BOOTSTRAP_SUBDIRS="../../../lib"
+
+do-top-obj: .PHONY .MAKE
+	${MAKEDIRTARGET} . obj NOSUBDIR=
+
+do-tools-obj: .PHONY .MAKE
+	${MAKEDIRTARGET} tools obj
+
+do-build: .PHONY .MAKE
+.for targ in dependall install
+	${MAKEDIRTARGET} . ${targ} BUILD_tools=no BUILD_lib=no
+.endfor
+
+do-x11: .PHONY .MAKE
+.if ${MKX11} != "no"
+.if ${X11FLAVOUR} == "Xorg"
+	${MAKEDIRTARGET} external/mit/xorg build
+.else
+	${MAKEDIRTARGET} x11 build
+.endif
+.else
+	@echo "MKX11 is not enabled"
+	@false
+.endif
+
+do-extsrc: .PHONY .MAKE
+.if ${MKEXTSRC} != "no"
+	${MAKEDIRTARGET} extsrc build
+.else
+	@echo "MKEXTSRC is not enabled"
+	@false
+.endif
+
+do-obsolete: .PHONY .MAKE
+	${MAKEDIRTARGET} etc install-obsolete-lists
+
+#
+# Speedup stubs for some subtrees that don't need to run these rules.
+# (Tells <bsd.subdir.mk> not to recurse for them.)
+#
+
+.for dir in bin etc distrib games libexec regress sbin usr.bin usr.sbin tools
+includes-${dir}: .PHONY
+	@true
+.endfor
+.for dir in etc distrib regress
+install-${dir}: .PHONY
+	@true
+.endfor
+
+#
+# XXX this needs to change when distrib Makefiles are recursion compliant
+# XXX many distrib subdirs need "cd etc && make snap_pre snap_kern" first...
+#
+dependall-distrib depend-distrib all-distrib: .PHONY
+	@true
+
+.include <bsd.sys.mk>
+.include <bsd.obj.mk>
+.include <bsd.kernobj.mk>
+.include <bsd.subdir.mk>
+
+#
+# Display current make(1) parameters
+#
+params: .PHONY .MAKE
+	${MAKEDIRTARGET} etc params
--- a/bin/Makefile
+++ b/bin/Makefile
@ -1,7 +1,7 @@
-# Makefile for bin
+#	$NetBSD: Makefile,v 1.22 2007/12/31 15:31:24 ad Exp $
+#	@(#)Makefile	8.1 (Berkeley) 5/31/93

-.include <bsd.own.mk>
-
-SUBDIR= cat date ed mkdir pax rm rmdir
+SUBDIR=	cat date ed \
+	mkdir pax rm rmdir

 .include <bsd.subdir.mk>
--- a/bin/Makefile.inc
+++ b/bin/Makefile.inc
@ -1,2 +1,11 @@
-BINDIR?=/bin
+#	$NetBSD: Makefile.inc,v 1.17 2012/03/21 05:47:53 matt Exp $
+#	@(#)Makefile.inc	8.1 (Berkeley) 5/31/93

+.include <bsd.own.mk>		# for MKDYNAMICROOT definition
+
+WARNS?=		5
+BINDIR?=	/bin
+
+.if (${MKDYNAMICROOT} == "no")
+LDSTATIC?=	-static
+.endif
--- a/bin/mkdir/Makefile
+++ b/bin/mkdir/Makefile
@ -2,6 +2,8 @@
 #	@(#)Makefile	8.1 (Berkeley) 5/31/93

 PROG=	mkdir
+.ifdef __MINIX
 SYMLINKS=	$(BINDIR)/$(PROG) /usr/bin/$(PROG)
+.endif

 .include <bsd.prog.mk>
--- a/bin/pax/Makefile
+++ b/bin/pax/Makefile
@ -54,6 +54,11 @@ DPADD+=	${LIBRMT}
 .if defined(__MINIX)
 CPPFLAGS+= -DHOSTPROG
 CPPFLAGS+= -Dlchown=chown -Dlchmod=chmod
+
+MAN+= bsdtar.1
+
+bsdtar.1: tar.1
+	${INSTALL} ${.ALLSRC} ${.TARGET}
 .endif

 .include <bsd.prog.mk>
--- a/build.sh
+++ b/build.sh
@ -1,5 +1,5 @@
 #! /usr/bin/env sh
-#	$NetBSD: build.sh,v 1.254 2012/02/26 20:32:40 tsutsui Exp $
+#	$NetBSD: build.sh,v 1.255 2012/08/05 04:39:09 matt Exp $
 #
 # Copyright (c) 2001-2011 The NetBSD Foundation, Inc.
 # All rights reserved.
@ -554,6 +554,14 @@ getarch()
 	#
 	case "${MACHINE}" in

+	evbearm-e[bl])
+		makewrappermachine=${MACHINE}
+		# MACHINE_ARCH is "arm" or "armeb", not "armel"
+		MACHINE_ARCH=earm${MACHINE##*-}
+		MACHINE_ARCH=${MACHINE_ARCH%el}
+		MACHINE=evbarm
+		;;
+
 	evbarm-e[bl])
 		makewrappermachine=${MACHINE}
 		# MACHINE_ARCH is "arm" or "armeb", not "armel"
@ -658,6 +666,11 @@ getarch()
 		MACHINE_ARCH=${MACHINE}
 		;;

+	i[4-6]86)
+		MACHINE=i386
+		MACHINE_ARCH=i386
+		;;
+
 	*)
 		bomb "Unknown target MACHINE: ${MACHINE}"
 		;;
@ -671,7 +684,7 @@ validatearch()
 	#
 	case "${MACHINE_ARCH}" in

-	alpha|arm|armeb|hppa|i386|m68000|m68k|mipse[bl]|mips64e[bl]|powerpc|powerpc64|sh3e[bl]|sparc|sparc64|vax|x86_64|ia64)
+	alpha|arm|armeb|earm|earmeb|hppa|i386|m68000|m68k|mipse[bl]|mips64e[bl]|powerpc|powerpc64|sh3e[bl]|sparc|sparc64|vax|x86_64|ia64)
 		;;

 	"")
@ -689,7 +702,11 @@ validatearch()
 	case "${MACHINE}" in

 	evbarm)
-		arches="arm armeb"
+		arches="arm armeb earm earmeb"
+		;;
+
+	cats|iyonix|netwinder|shark|zaurus)
+		arches="arm earm"
 		;;

 	algor|arc|cobalt|pmax)
@ -1196,8 +1213,7 @@ parseoptions()
 	[ -z "${BUILDID}" ] || makeenv="${makeenv} BUILDID"
 	MAKEFLAGS="-de -m ${TOP}/share/mk ${MAKEFLAGS}"
 	MAKEFLAGS="${MAKEFLAGS} MKOBJDIRS=${MKOBJDIRS-yes}"
-	BUILDSH=1
-	export MAKEFLAGS MACHINE MACHINE_ARCH BUILDSH
+	export MAKEFLAGS MACHINE MACHINE_ARCH
 }

 # sanitycheck --
@ -1521,7 +1537,7 @@ validatemakeparams()
 	if [ -z "${DESTDIR}" ] || [ "${DESTDIR}" = "/" ]; then
 		if ${do_build} || ${do_distribution} || ${do_release}; then
 			if ! ${do_build} || \
-			   [ "${uname_s}" != "NetBSD" ] || \
+			   [ "${uname_s}" != "Minix" ] || \
 			   [ "${uname_m}" != "${MACHINE}" ]; then
 				bomb "DESTDIR must != / for cross builds, or ${progname} 'distribution' or 'release'."
 			fi
@ -1657,7 +1673,7 @@ createmakewrapper()
 	eval cat <<EOF ${makewrapout}
 #! ${HOST_SH}
 # Set proper variables to allow easy "make" building of a NetBSD subtree.
-# Generated from:  \$NetBSD: build.sh,v 1.254 2012/02/26 20:32:40 tsutsui Exp $
+# Generated from:  \$NetBSD: build.sh,v 1.255 2012/08/05 04:39:09 matt Exp $
 # with these arguments: ${_args}
 #

@ -1700,10 +1716,10 @@ make_in_dir()

 buildtools()
 {
-#	if [ "${MKOBJDIRS}" != "no" ]; then
-#		${runcmd} "${makewrapper}" ${parallel} obj-tools ||
-#		    bomb "Failed to make obj-tools"
-#	fi
+	if [ "${MKOBJDIRS}" != "no" ]; then
+		${runcmd} "${makewrapper}" ${parallel} obj-tools ||
+		    bomb "Failed to make obj-tools"
+	fi
 	if [ "${MKUPDATE}" = "no" ]; then
 		make_in_dir tools cleandir
 	fi
@ -2014,7 +2030,7 @@ main()
 		installmodules=*)
 			arg=${op#*=}
 			if [ "${arg}" = "/" ] && \
-			    (	[ "${uname_s}" != "NetBSD" ] || \
+			    (	[ "${uname_s}" != "Minix" ] || \
 				[ "${uname_m}" != "${MACHINE}" ] ); then
 				bomb "'${op}' must != / for cross builds."
 			fi
@ -2024,7 +2040,7 @@ main()
 		install=*)
 			arg=${op#*=}
 			if [ "${arg}" = "/" ] && \
-			    (	[ "${uname_s}" != "NetBSD" ] || \
+			    (	[ "${uname_s}" != "Minix" ] || \
 				[ "${uname_m}" != "${MACHINE}" ] ); then
 				bomb "'${op}' must != / for cross builds."
 			fi
--- a/commands/ash/Makefile
+++ b/commands/ash/Makefile
@ -2,29 +2,10 @@

 .include <bsd.own.mk>

-YHEADER=1
 PROG=	sh
-
-SHSRCS=	alias.c arith.y arith_lex.l cd.c echo.c error.c eval.c exec.c expand.c \
-	histedit.c input.c jobs.c mail.c main.c memalloc.c miscbltin.c \
-	mystring.c options.c output.c parser.c redir.c show.c \
-	trap.c var.c setmode.c expr.c regexp.c
-GENSRCS= builtins.c init.c nodes.c syntax.c operators.c signames.c
-GENHDRS= builtins.h nodes.h syntax.h token.h operators.h signames.h
-SRCS= ${SHSRCS} ${GENSRCS}
-DPSRCS+=${GENHDRS}
 BINDIR=	/bin
 MAN=

-DPADD+= ${LIBL} ${LIBEDIT}
-LDADD+= -ll -ledit
-
-LFLAGS=	-8	# 8-bit lex scanner for arithmetic
-YFLAGS=	-d
-
-# The .depend file can get references to these temporary files
-.OPTIONAL: lex.yy.c y.tab.c
-
 # Enable this line to disable command line editing
 #EDIT=-DNO_HISTORY
 # Enable this line to use the editline library instead of libedit
@ -37,55 +18,83 @@ EDIT=-DEDITLINE
 NO_JOBS=-DJOBS=0
 MKB_NO_JOBS=-j

-CPPFLAGS+=-DSHELL -I. -I${.CURDIR}
+SRCS=	alias.c arith.y arith_lex.l cd.c eval.c exec.c expand.c \
+	histedit.c input.c jobs.c mail.c main.c memalloc.c miscbltin.c \
+	mystring.c options.c output.c parser.c redir.c show.c \
+	trap.c var.c setmode.c
+
+.include "${.CURDIR}/bltin/Makefile.inc"
+
+GENSRCS= builtins.c init.c nodes.c syntax.c operators.c signames.c
+GENHDRS= builtins.h nodes.h syntax.h token.h operators.h signames.h
+
+SRCS+= ${GENSRCS}
+
+CLEANFILES+=${GENSRCS} ${GENHDRS}
+
+DPADD+= ${LIBL} ${LIBEDIT}
+LDADD+= -ll -ledit
+
+CPPFLAGS+= -DSHELL -D__NBSD_LIBC
 CPPFLAGS+=${EDIT} ${NO_PATHS_H} ${NO_JOBS}

-.PATH:	${.CURDIR}/bltin
+CPPFLAGS+= -I. -I${.CURDIR}

-CLEANFILES+= mkinit mkinit.lo mknodes mknodes.lo \
-	mksyntax mksyntax.lo mksignames mksignames.lo
-CLEANFILES+= ${GENSRCS} ${GENHDRS} y.tab.h
+# A. Generate C tools used to build ash
+.for tool in init nodes signames syntax
+${.OBJDIR}/mk${tool}: ${.CURDIR}/mk${tool}.c
+	${HOST_CC} ${.ALLSRC} -o ${.TARGET}
+.endfor

-build-tools: mkinit mknodes mksyntax mksignames
+# B. Generates C sources from C tools
+NODES_ARGS:= ${.CURDIR}/nodetypes ${.CURDIR}/nodes.c.pat
+INIT_ARGS:= alias.c eval.c exec.c input.c jobs.c options.c parser.c \
+            redir.c trap.c var.c

-.ORDER: builtins.c builtins.h
-builtins.c builtins.h: mkbuiltins builtins.def shell.h
-	cd ${.CURDIR}; sh mkbuiltins ${MKB_NO_JOBS} ${.OBJDIR} shell.h builtins.def
+.for tool in nodes signames syntax
+${tool}.c ${tool}.h: ${.OBJDIR}/mk${tool}
+	${.OBJDIR}/mk${tool} ${${tool:tu}_ARGS}
+.endfor

-init.c: mkinit alias.c eval.c exec.c input.c jobs.c options.c parser.c \
-	redir.c trap.c var.c
-	./mkinit ${.ALLSRC:S/^mkinit$//}
+init.c: ${.OBJDIR}/mkinit \
+        alias.c eval.c exec.c input.c jobs.c options.c parser.c \
+        redir.c trap.c var.c
+	${.OBJDIR}/mkinit ${.ALLSRC:S/^${.OBJDIR}/mkinit$//}

-mkinit: mkinit.lo
-	${HOST_LINK.c}  mkinit.lo -o $@
+# C. Generates C sources from shell scripts
+token.h:
+	${.CURDIR}/mktokens.sh

-mknodes: mknodes.lo
-	${HOST_LINK.c} mknodes.lo -o $@
-mksyntax: mksyntax.lo
-	${HOST_LINK.c} mksyntax.lo  -o $@
-mksignames: mksignames.lo
-	${HOST_LINK.c} mksignames.lo -o $@
+builtins.c builtins.h:
+	${.CURDIR}/mkbuiltins.sh ${MKB_NO_JOBS} . ${.CURDIR}/shell.h ${.CURDIR}/builtins.def

-.ORDER: nodes.c nodes.h
-nodes.c nodes.h: mknodes nodetypes nodes.c.pat
-	./mknodes ${.CURDIR}/nodetypes ${.CURDIR}/nodes.c.pat
+operators.c operators.h:
+	${.CURDIR}/bltin/mkexpr.sh ${.CURDIR}/bltin/unary_op ${.CURDIR}/bltin/binary_op

-.ORDER: syntax.c syntax.h
-syntax.c syntax.h: mksyntax
-	./mksyntax
+# D. Generates sources from yacc/lex
+LFLAGS=	-8	# 8-bit lex scanner for arithmetic

-token.h: mktokens
-	sh ${.CURDIR}/mktokens
+YFLAGS:= -d
+CLEANFILES+= arith.h arith.y.o

-.ORDER: signames.c signames.h
-signames.c signames.h: mksignames
-	./mksignames
+parser.c: token.h
+y.tab.h: arith.y
+arith.h: y.tab.h
+arith_lex.l: arith.h

-.ORDER: operators.c operators.h
-operators.c operators.h: mkexpr unary_op binary_op
-	sh ${.CURDIR}/bltin/mkexpr ${.CURDIR}/bltin/unary_op ${.CURDIR}/bltin/binary_op
+# Explicit dependencies to ensure creation when needed
+# LSC FIXME Under MINIX, the build system curiously needs more help.
+# is it because of the missing order tools?
+expand.c: arith.h
+trap.c: signames.h
+cd.c complete.c eval.c exec.c expand.c jobs.c main.c options.c parser.c redir.c show.c trap.c var.c: nodes.h
+eval.c exec.c expand.c input.c input.h jobs.c mystring.c output.c parser.c trap.c var.c: syntax.h

-arith.h: arith.c
-arith.c: arith.y
+# LSC: Seems that this file is implicitly taken into account by NetBSD's make, 
+# still seems to be ignored / not found currently.
+# It's a sad story, as it has default rules to manage yacc / lex files. So for
+# a happy ending here it is explicitly included:
+.include <sys.mk>

 .include <bsd.prog.mk>
+
--- a/commands/ash/TOUR
+++ b/commands/ash/TOUR
--- a/commands/ash/bltin/Makefile.inc
+++ b/commands/ash/bltin/Makefile.inc
@ -0,0 +1,7 @@
+
+.PATH: ${.CURDIR}/bltin
+
+SRCS+= echo.c error.c expr.c regexp.c
+
+# LSC Again nbmake seems dumber on MINIX...
+expr.c: operators.h
--- a/commands/ash/bltin/binary_op
+++ b/commands/ash/bltin/binary_op
--- a/commands/ash/bltin/makefile.not
+++ b/commands/ash/bltin/makefile.not
--- a/commands/ash/bltin/mkexpr.sh
+++ b/commands/ash/bltin/mkexpr.sh
@ -1,3 +1,4 @@
+#!/bin/sh
 # Copyright 1989 by Kenneth Almquist.  All rights reserved.
 #
 # This file is part of ash.  Ash is distributed under the terms specified
--- a/commands/ash/bltin/unary_op
+++ b/commands/ash/bltin/unary_op
--- a/commands/ash/mkbuiltins.sh
+++ b/commands/ash/mkbuiltins.sh
--- a/commands/ash/mktokens.sh
+++ b/commands/ash/mktokens.sh
--- a/commands/ash/nodes.c.pat
+++ b/commands/ash/nodes.c.pat
--- a/commands/ash/nodetypes
+++ b/commands/ash/nodetypes
--- a/commands/backup/Makefile
+++ b/commands/backup/Makefile
@ -1,3 +1,6 @@
+# LSC For nwo
+NOGCCERROR:= yes
+
 PROG=	backup
 MAN=

--- a/commands/cal/Makefile
+++ b/commands/cal/Makefile
@ -1,3 +1,5 @@
+# LSC For now...
+NOGCCERROR:=yes
 PROG=	cal
 MAN=

--- a/commands/cawf/Makefile
+++ b/commands/cawf/Makefile
@ -33,6 +33,9 @@
 #	malloc() and its relatives (most do).
 #
 #DEFS = -DUNIX -DMALLOCH
+#LSC For now...
+NOGCCERROR:= yes
+
 DEFS= -DUNIX -DUSG -DSTDLIB
 CPPFLAGS+= ${DEFS}

--- a/commands/chmod/Makefile
+++ b/commands/chmod/Makefile
@ -1,3 +1,5 @@
+# LSC For now...
+NOGCCERROR:= yes
 PROG=	chmod
 MAN=
 BINDIR=/bin
--- a/commands/chown/Makefile
+++ b/commands/chown/Makefile
@ -1,3 +1,5 @@
+# LSC For Now
+NOGCCERROR:= yes
 PROG=	chown
 MAN=

--- a/commands/cleantmp/Makefile
+++ b/commands/cleantmp/Makefile
@ -1,3 +1,5 @@
+# LSC For now
+NOGCCERROR:= yes
 PROG=	cleantmp
 MAN=

--- a/commands/compress/Makefile
+++ b/commands/compress/Makefile
@ -1,3 +1,5 @@
+# LSC For Now...
+NOGCCERROR:= yes
 PROG=	compress
 MAN=

--- a/commands/cp/Makefile
+++ b/commands/cp/Makefile
@ -1,3 +1,5 @@
+# LSC For Now...
+NOGCCERROR:= yes
 PROG=	cp
 BINDIR=	/bin
 MAN=
--- a/commands/cron/Makefile
+++ b/commands/cron/Makefile
@ -1,5 +1,7 @@
 # Makefile for cron.

+# LSC For Now...
+NOGCCERROR:=yes
 PROG=	cron
 SRCS=	cron.c tab.c misc.c
 MAN=
--- a/commands/crontab/Makefile
+++ b/commands/crontab/Makefile
@ -2,6 +2,9 @@

 .include <bsd.own.mk>

+# LSC For now...
+NOGCCERROR:= yes
+
 PROG=	crontab
 SRCS=	crontab.c tab.c misc.c
 CPPFLAGS+= -I${.CURDIR} -I${NETBSDSRCDIR}/commands/cron
--- a/commands/dd/Makefile
+++ b/commands/dd/Makefile
@ -1,3 +1,5 @@
+# LSC For now
+NOGCCERROR:=yes
 PROG=	dd
 MAN=

--- a/commands/devmand/Makefile
+++ b/commands/devmand/Makefile
@ -1,15 +1,20 @@
+
 PROG = devmand 
-
-SRCS = main.c lex.yy.c y.tab.c
-
-lex.yy.c: usb_scan.l y.tab.h
-	${LEX} usb_scan.l
-
-y.tab.c y.tab.h: usb.y
-	${YACC} -d usb.y
-
-CLEANFILES = y.tab.c y.tab.h *.d lex.yy.c lex.yy.o main.o y.tab.o
 MAN =
+
+SRCS = main.c usb_scan.l usb.y
+CPPFLAGS+= -I${.CURDIR}
+
+YFLAGS:= -d
+CLEANFILES+= y.tab.h
+
+usb_scan.l: usb.y
+
 .include <bsd.prog.mk>

+# LSC: Seems that this file is implicitly taken into account by NetBSD's make, 
+# still seems to be ignored / not found currently.
+# It's a sad story, as it has default rules to manage yacc / lex files. So for
+# a happy ending here it is explicitly included:
+.include <sys.mk>

--- a/commands/elvis/Makefile
+++ b/commands/elvis/Makefile
@ -15,6 +15,9 @@ CPPFLAGS+= -w -DCRUNCH \
 	-DNO_MODELINE -DNO_OPTCOLS -DNO_DIGRAPH -DNO_EXTENSIONS \
 	-DNO_ERRLIST -DNO_FKEY -DNO_VISIBLE -DNO_COLOR -DNO_POPUP

+# LSC Force usage of local getline
+CPPFLAGS+= -D__NBSD_LIBC
+
 ###########################################################################
 ###     The rest of this Makefile contains no user-serviceable parts    ###
 ###########################################################################
@ -25,13 +28,8 @@ SRCS.elvis= blk.c cmd1.c cmd2.c ctype.c curses.c cut.c ex.c input.c \
   unix.c vars.c vcmd.c vi.c

 BINDIR= /usr/bin
-.if !exists(${BINDIR}/vi)
 LINKS+= ${BINDIR}/elvis ${BINDIR}/vi
-.endif
-
-.if !exists(${BINDIR}/ex)
 LINKS+= ${BINDIR}/elvis ${BINDIR}/ex
-.endif

 MAN.elvis=
 MAN.ctags=
--- a/commands/finger/Makefile
+++ b/commands/finger/Makefile
@ -1,4 +1,7 @@
 PROG=	finger
 MAN=

+# LSC Force finger to use its local fwopen macro
+CPPFLAGS.finger.c+=-D__NBSD_LIBC
+
 .include <bsd.prog.mk>
--- a/commands/fix/Makefile
+++ b/commands/fix/Makefile
@ -1,4 +1,7 @@
 PROG=	fix
 MAN=

+# LSC Force fix to use its local definition of getline
+CPPFLAGS.fix.c+= -D__NBSD_LIBC
+
 .include <bsd.prog.mk>
--- a/commands/ftp101/Makefile
+++ b/commands/ftp101/Makefile
@ -8,4 +8,7 @@ PROG=	ftp
 SRCS=	ftp.c local.c file.c xfer.c other.c net.c crc.c
 CPPFLAGS+= -DCRC_ONLY

+# LSC Force ftp.c to use its local definition of getline
+CPPFLAGS+= -D__NBSD_LIBC
+
 .include <bsd.prog.mk>
--- a/commands/gcov-pull/Makefile
+++ b/commands/gcov-pull/Makefile
@ -1,4 +1,6 @@
 PROG=gcov-pull
 MAN=

+CPPFLAGS.gcov-pull.c+= -D__NBSD_LIBC
+
 .include <bsd.prog.mk>
--- a/commands/getty/Makefile
+++ b/commands/getty/Makefile
@ -1,3 +1,5 @@
+# LSC For now...
+NOGCCERROR:= yes
 PROG=	getty
 BINDIR=	/bin
 MAN=
--- a/commands/host/Makefile
+++ b/commands/host/Makefile
@ -1,4 +1,6 @@
 PROG=	host
 MAN=

+CPPFLAGS.host.c+= -D__NBSD_LIBC
+
 .include <bsd.prog.mk>
--- a/commands/hostaddr/Makefile
+++ b/commands/hostaddr/Makefile
@ -1,5 +1,6 @@
 PROG=	hostaddr
 BINMODE= 4755
 MAN=
+CPPFLAGS+= -D__NBSD_LIBC

 .include <bsd.prog.mk>
--- a/commands/logger/Makefile
+++ b/commands/logger/Makefile
@ -1,4 +1,5 @@
 PROG=	logger
 MAN=
+CPPFLAGS.logger.c+= -D__NBSD_LIBC

 .include <bsd.prog.mk>
--- a/commands/ls/Makefile
+++ b/commands/ls/Makefile
@ -2,4 +2,7 @@ PROG=	ls
 BINDIR=	/bin
 MAN=

+# LSC Force usage of local mergesort
+CPPFLAGS.ls.c+= -D__NBSD_LIBC
+
 .include <bsd.prog.mk>
--- a/commands/nonamed/Makefile
+++ b/commands/nonamed/Makefile
@ -1,4 +1,6 @@
 PROG=	nonamed
 MAN=

+CPPFLAGS+=-D__NBSD_LIBC
+
 .include <bsd.prog.mk>
--- a/commands/reboot/Makefile
+++ b/commands/reboot/Makefile
@ -12,4 +12,6 @@ SYMLINKS+=	${BINDIR}/reboot /usr/bin/reboot
 MAN.shutdown=
 MAN.halt=

+CPPFLAGS+= -D__NBSD_LIBC
+
 .include <bsd.prog.mk>
--- a/commands/syslogd/Makefile
+++ b/commands/syslogd/Makefile
@ -6,6 +6,7 @@
 PROG=	syslogd
 PIDFILE= -DPIDFILE=\"/var/run/syslogd.pid\"
 CPPFLAGS+= -Ddebug=0 ${PIDFILE}
+CPPFLAGS+= -D__NBSD_LIBC
 BINMODE= 700
 MAN=

--- a/commands/tcpstat/Makefile
+++ b/commands/tcpstat/Makefile
@ -1,5 +1,8 @@
 PROG=	tcpstat
 CPPFLAGS+= -I${NETBSDSRCDIR}/servers -D'ARGS(a)=a'
+
+# LSC Force inet.h to use ioc_net.h
+CPPFLAGS+= -D__NBSD_LIBC
 MAN=

 .include <bsd.prog.mk>
--- a/commands/udpstat/Makefile
+++ b/commands/udpstat/Makefile
@ -2,4 +2,7 @@ PROG=	udpstat
 CPPFLAGS+= -I${NETBSDSRCDIR}/servers -D'ARGS(a)=a'
 MAN=

+# LSC Force inet.h to use sys/ioc_net.h
+CPPFLAGS+= -D__NBSD_LIBC
+
 .include <bsd.prog.mk>
--- a/commands/writeisofs/Makefile
+++ b/commands/writeisofs/Makefile
@ -1,4 +1,7 @@
 PROG=	writeisofs
 MAN=

+# LSC Prevent redefinition ot types
+CPPFLAGS.writeisofs.c+= -D__NBSD_LIBC
+
 .include <bsd.prog.mk>
--- a/common/Makefile
+++ b/common/Makefile
@ -0,0 +1,4 @@
+
+SUBDIR+= include
+
+.include <bsd.subdir.mk>
--- a/common/include/Makefile
+++ b/common/include/Makefile
@ -0,0 +1,8 @@
+
+INCSDIR= /usr/include/minix
+
+INCS+= termios.h
+
+SUBDIR+= sys
+
+.include <bsd.kinc.mk>
--- a/common/include/Makefile.termios.inc
+++ b/common/include/Makefile.termios.inc
@ -1,6 +0,0 @@
-.include <bsd.own.mk>
-
-.PATH: ${NETBSDSRCDIR}/common/include
-
-INCS+= termios.h	
-
--- a/common/include/sys/Makefile.inc
+++ b/common/include/sys/Makefile.inc
@ -1,10 +1,11 @@
-.include <bsd.own.mk>

-.PATH: ${NETBSDSRCDIR}/common/include/sys
+INCSDIR= /usr/include/sys

-INCS+= 	elf64.h elf_common.h elf_generic.h \
+INCS+= elf64.h elf_common.h elf_generic.h \
 	ioc_block.h ioc_fbd.h ioc_file.h ioc_tape.h ioc_disk.h \
 	ioc_memory.h ioc_sound.h ioc_tty.h \
 	kbdio.h mtio.h svrctl.h video.h vm.h procfs.h elf_core.h exec_elf.h \
 	disk.h dkio.h ioccom.h mutex.h iostat.h disklabel.h disklabel_gpt.h \
-	bootblock.h dkbad.h extattr.h
+	bootblock.h dkbad.h
+
+.include <bsd.kinc.mk>
--- a/common/lib/libc/Makefile.inc
+++ b/common/lib/libc/Makefile.inc
@ -1,12 +1,13 @@
-# $NetBSD: Makefile.inc,v 1.10 2008/10/26 07:22:50 mrg Exp $
+# $NetBSD: Makefile.inc,v 1.12 2012/07/08 01:21:12 rmind Exp $

 COMMON_DIR:=${.PARSEDIR}
 .if defined(__MINIX)
 COMMON_CODEDIRS=atomic gen inet md net quad stdlib string 
+COMMON_CODEDIRS+=hash/sha1 hash/sha2 hash/rmd160
 .else
 COMMON_CODEDIRS=atomic gen gmon inet md net quad stdlib string sys
+COMMON_CODEDIRS+=hash/sha1 hash/sha2 hash/rmd160 hash/murmurhash
 .endif
-COMMON_CODEDIRS+=hash/sha1 hash/sha2 hash/rmd160

 .if defined(COMMON_MACHINE_ARCH) && !empty(COMMON_MACHINE_ARCH) && \
    exists(${COMMON_DIR}/arch/${COMMON_MACHINE_ARCH})
@ -29,6 +30,11 @@ COMMON_ARCHDIR=${COMMON_DIR}/arch/${COMMON_ARCHSUBDIR}
 .if exists(${COMMON_ARCHDIR}/${i}/Makefile.inc)
 .include "${COMMON_ARCHDIR}/${i}/Makefile.inc"
 .endif
+.if !empty(CPPFLAGS:M-DLIBKERN_OPTIMISE_SPACE) && \
+    exists(${COMMON_ARCHDIR}/$i/small)
+.PATH.S: ${COMMON_ARCHDIR}/$i/small
+.endif
+
 .if exists(${COMMON_ARCHDIR}/$i)
 .PATH.c: ${COMMON_ARCHDIR}/$i
 .PATH.S: ${COMMON_ARCHDIR}/$i
--- a/common/lib/libc/arch/arm/atomic/Makefile.inc
+++ b/common/lib/libc/arch/arm/atomic/Makefile.inc
@ -1,19 +1,40 @@
-#	$NetBSD: Makefile.inc,v 1.8 2009/01/04 17:54:29 pooka Exp $
+#	$NetBSD: Makefile.inc,v 1.9 2012/08/16 16:49:10 matt Exp $
+
+ARMV6= ${CPUFLAGS:M-march=armv7*} ${CPUFLAGS:M-mcpu=cortex*}
+ARMV6+= ${CPUFLAGS:M-march=armv6*} ${CPUFLAGS:M-mcpu=arm11*}
+ARMV6+= ${CFLAGS:M-march=armv7*:} ${CFLAGS:M-mcpu=cortex*}
+ARMV6+= ${CFLAGS:M-march=armv6*:} ${CFLAGS:M-mcpu=arm11*}
+ARMV6+= ${CPPFLAGS:M-march=armv7*:} ${CPPFLAGS:M-mcpu=cortex*}
+ARMV6+= ${CPPFLAGS:M-march=armv6*:} ${CPPFLAGS:M-mcpu=arm11*}

 .if defined(LIB) && (${LIB} == "kern" || ${LIB} == "c" || ${LIB} == "pthread" \
 	|| ${LIB} == "rump" || (defined(__MINIX) && ${LIB} == "sys"))

-SRCS+=	atomic_add_32_cas.c atomic_add_32_nv_cas.c atomic_and_32_cas.c \
-	atomic_and_32_nv_cas.c atomic_dec_32_cas.c atomic_dec_32_nv_cas.c \
-	atomic_inc_32_cas.c atomic_inc_32_nv_cas.c atomic_or_32_cas.c \
-	atomic_or_32_nv_cas.c atomic_swap_32_cas.c membar_ops_nop.c
+.if empty(ARMV6)
+SRCS.atomic+=	atomic_add_32_cas.c atomic_add_32_nv_cas.c \
+		atomic_and_32_cas.c atomic_and_32_nv_cas.c \
+		atomic_dec_32_cas.c atomic_dec_32_nv_cas.c \
+		atomic_inc_32_cas.c atomic_inc_32_nv_cas.c \
+		atomic_or_32_cas.c atomic_or_32_nv_cas.c \
+		atomic_swap_32_cas.c membar_ops_nop.c
+.else
+SRCS.atomic+=	atomic_add_32.S atomic_and_32.S atomic_cas_32.S \
+		atomic_dec_32.S atomic_inc_32.S atomic_or_32.S \
+		atomic_swap.S membar_ops.S
+.endif

 .endif

 .if defined(LIB) && (${LIB} == "c" || ${LIB} == "pthread")

-SRCS+=	atomic_init_testset.c
-SRCS+=	atomic_cas_up.S
+.if empty(ARMV6)
+SRCS.atomic+=	atomic_init_testset.c
+SRCS.atomic+=	atomic_cas_up.S
 CPPFLAGS+= -D__HAVE_ASM_ATOMIC_CAS_UP
+.else
+SRCS.atomic+=	atomic_init_cas.c
+.endif

 .endif
+
+SRCS+=	${SRCS.atomic}
--- a/common/lib/libprop/Makefile.inc
+++ b/common/lib/libprop/Makefile.inc
@ -1,4 +1,4 @@
-#	$NetBSD: Makefile.inc,v 1.8 2008/06/30 20:14:09 matt Exp $
+#	$NetBSD: Makefile.inc,v 1.9 2012/07/27 09:10:59 pooka Exp $

 .PATH:	${.PARSEDIR}

@ -6,4 +6,6 @@ SRCS+=	prop_array.c prop_array_util.c prop_bool.c prop_data.c \
        prop_dictionary.c prop_dictionary_util.c prop_ingest.c \
        prop_kern.c prop_number.c prop_object.c prop_stack.c prop_string.c

-#SRCS+=	prop_rb.c
+.ifdef (PROPLIB_WANT_RB)
+SRCS+=	prop_rb.c
+.endif
--- a/distrib/Makefile
+++ b/distrib/Makefile
@ -0,0 +1,26 @@
+#	$NetBSD: Makefile,v 1.19 2012/02/14 19:39:37 joerg Exp $
+
+.include <bsd.own.mk>
+
+.if ${MKGROFF} != "no"
+SUBDIR=	notes .WAIT
+.endif
+
+.if !defined(__MINIX)
+SUBDIR+= utils
+.endif
+
+.if exists(${MACHINE}/miniroot/Makefile.inc)
+SUBDIR+= miniroot .WAIT
+.endif
+
+.if exists(${RELEASEMACHINE}/Makefile)
+SUBDIR+= ${RELEASEMACHINE}
+.endif
+
+TARGETS+=release
+TARGETS+=iso_image
+TARGETS+=live_image
+TARGETS+=install_image
+
+.include <bsd.subdir.mk>
--- a/distrib/Makefile.inc
+++ b/distrib/Makefile.inc
@ -0,0 +1,7 @@
+#	$NetBSD: Makefile.inc,v 1.10 2012/01/22 03:53:32 tsutsui Exp $
+
+.include "../Makefile.inc"
+
+iso_image: .PHONY
+live_image: .PHONY
+install_image: .PHONY
--- a/distrib/common/10-resolv.conf
+++ b/distrib/common/10-resolv.conf
@ -0,0 +1,22 @@
+# Minimal version using shell builtins.
+
+make_resolv_conf()
+{
+	if [ -z "${new_domain_name_servers}" -a \
+		-z "${new_domain_name}" -a \
+		-z "${new_domain_search}" ]; then
+		return 0
+	fi
+	if [ -n "${new_domain_search}" ]; then
+		echo "search ${new_domain_search}" >> /etc/resolv.conf
+	elif [ -n "${new_domain_name}" ]; then
+		echo "search ${new_domain_name}" >> /etc/resolv.conf
+	fi
+	for x in ${new_domain_name_servers}; do
+		echo "nameserver ${x}" >> /etc/resolv.conf
+	done
+}
+
+case "${reason}" in
+BOUND|INFORM|REBIND|REBOOT|RENEW|TIMEOUT)	make_resolv_conf;;
+esac
--- a/distrib/common/99-print-sysinst
+++ b/distrib/common/99-print-sysinst
@ -0,0 +1,11 @@
+# $NetBSD: 99-print-sysinst,v 1.1 2009/04/07 11:49:17 joerg Exp $
+
+case "${reason}" in
+BOUND|INFORM|REBIND|REBOOT|RENEW|TIMEOUT)
+	cat > /tmp/dhcpcd-lease << EOF
+host-name=${new_host_name}
+domain-name=${new_domain_name}
+EOF
+	set > /tmp/dhcpcd-lease-all
+	;;
+esac
--- a/distrib/common/Makefile.bootcd
+++ b/distrib/common/Makefile.bootcd
@ -0,0 +1,227 @@
+#	$NetBSD: Makefile.bootcd,v 1.20 2012/08/17 16:57:59 riz Exp $
+#
+# Makefile snipped to create a CD/DVD ISO
+#
+
+# XXX TODO:
+# 1) merge with src/distrib/cdrom
+# 2) teach makefs to add data from more than 1 directory (see below)
+
+#
+# Required variables:
+#	CDBASE		Basename of the iso
+#
+# Optional variables:
+#	CDRELEASE	Set to 'true' to include $RELEASEDIR/$MACHINE on the CD
+#	CDRELEASE_NOISOS Excludes installation/cdrom directory if set
+#	CDSOURCE	Set to 'true' to include $RELEASEDIR/source on the CD
+#	CDEXTRA		Set to a list of files or directories containing extra
+#			stuff to put on CD (set by build.sh -C flag)
+#	CDBUILDEXTRA	Set to a list of files or directories containing extra
+#			stuff to put on CD (use in Makefiles)
+#	CDEXTRA_SKIP	A list of file exclusion paths to exclude when copying
+#			directories of extra stuff in CDEXTRA AND CDBUILDEXTRA
+#	BOOT		Defaults to $DESTDIR/usr/mdec/boot
+#	BOOTXX_CD9660	Defaults to $DESTDIR/usr/mdec/bootxx_cd9660
+#	CDBOOTOPTIONS	Options for installboot, eg -o console=com0,speed=9600
+#	CDMAKEFSOPTIONS	Options for makefs, eg bootimage=i386;bootxx,no-emul-boot
+#	CDROMS_RELEASEDIR Where to install ${CDBASE}.iso
+#	CDINSTKERNEL	instkernel directory (relative to ${.CURDIR})
+#	CDKERNELS	couples of the form:
+#				source	name_on_cd
+#	CDRUNTIME	files/directories to copy from $DESTDIR onto the CD
+# source kernels are copied from ${CDINSTKERNEL} (or its obj dir)
+# note that as of yet, bootxx_cd9660 can't load kernel names of more than
+# 8 chars (though they can be in a sub-directory meaning the pathname is
+# longer than 8 chars)
+#
+
+BOOT?=		${DESTDIR}/usr/mdec/boot
+BOOTXX_CD9660?=	${DESTDIR}/usr/mdec/bootxx_cd9660
+CDRELEASE?=	false
+CDSOURCE?=	false
+.if ${CDRELEASE} == false
+CDROMS_RELEASEDIR?=	${MACHINE}/installation/cdrom
+.else
+CDROMS_RELEASEDIR?=	images
+.endif
+.if defined(CDRELEASE_NOISOS)
+CDRELEASE_EXCLUDE=	-s ',./installation/cdrom.*,,gp'
+.endif
+.if !defined(CDRELEASE_LIVEIMAGE)
+CDRELEASE_EXCLUDE+=	-s ',./installation/liveimage.*,,gp'
+.endif
+.if !defined(CDRELEASE_INSTALLIMAGE)
+CDRELEASE_EXCLUDE+=	-s ',./installation/installimage.*,,gp'
+.endif
+
+.include <bsd.sys.mk>		# for HOST_SH
+.include <bsd.own.mk> 		# For PRINTOBJDIR
+.include <bsd.kernobj.mk>	# For KERNSRCDIR
+
+DISTRIBVER!=	${HOST_SH} ${KERNSRCDIR}/conf/osrelease.sh
+DISTRIBREV!=	${HOST_SH} ${KERNSRCDIR}/conf/osrelease.sh -s
+ISO_VOLID!=	echo NETBSD_${DISTRIBREV} | tr a-z A-Z
+PUBLISHER?= The_NetBSD_Project
+.if defined(CDMAKEFSOPTIONS)
+_CDMAKEFSOPTIONS=	rockridge,label=${ISO_VOLID},publisher=${PUBLISHER},${CDMAKEFSOPTIONS}
+.else
+_CDMAKEFSOPTIONS=	rockridge,label=${ISO_VOLID},publisher=${PUBLISHER}
+.endif
+
+# Stuff that should come from elsewhere - XXX where? - HF
+CP?=		cp
+RM?=		rm
+MKDIR?=		mkdir -p
+CHMOD?=		chmod
+ECHO?=		echo
+
+.if ${CDRELEASE} == false
+CDIMAGE=	${CDBASE}.iso
+.else
+CDIMAGE=	NetBSD-${DISTRIBVER}-${CDBASE:S/cd$//}.iso
+.endif
+
+CLEANFILES+=	${CDIMAGE}
+CLEANFILES+=	bootxx.${MACHINE}
+
+
+.include "${NETBSDSRCDIR}/distrib/common/Makefile.distrib"
+
+.if defined(CDINSTKERNEL)
+_INSTKERNELNOBJDIR!=	cd ${.CURDIR}/${CDINSTKERNEL} && ${PRINTOBJDIR}
+.endif
+.if exists(${DESTDIR}/usr/mdec/bootxx_cd9660)
+.if exists(${DESTDIR}/usr/mdec/boot.${MACHINE})
+BOOT2=boot.${MACHINE}
+.else
+BOOT2=boot
+.endif
+.endif
+
+prepare:
+	${MKDIR} cdrom
+.if defined(CDKERNELS)
+.for kernel target in ${CDKERNELS}
+	${CP} ${_INSTKERNELNOBJDIR}/${kernel} cdrom/${target}
+.endfor
+.if exists(${DESTDIR}/usr/mdec/bootxx_cd9660)
+	${RM} -f cdrom/${BOOT2}
+	${CP} ${DESTDIR}/usr/mdec/${BOOT2} cdrom/${BOOT2}
+	${RM} -f bootxx.${MACHINE}
+	${CP} ${DESTDIR}/usr/mdec/bootxx_cd9660 bootxx.${MACHINE}
+	${CHMOD} +w bootxx.${MACHINE}
+.if defined(CDBOOTOPTIONS)
+	${TOOL_INSTALLBOOT} -m${MACHINE} -e ${CDBOOTOPTIONS} bootxx.${MACHINE}
+.endif
+.endif
+.endif
+
+# Copy $RELEASEDIR/${MACHINE} in the CDROM dir
+#
+# XXX This could be done a lot easier if makefs(8) could
+# XXX include more than one directory on the image - HF
+#
+copy-releasedir:
+	${RM} -f ${RELEASEDIR}/${CDROMS_RELEASEDIR}/${CDIMAGE}
+	if ${CDRELEASE}; then 						\
+		if [ ! -d ${RELEASEDIR}/${RELEASEMACHINEDIR} ]; then 		\
+			echo "Missing ${RELEASEDIR}/${RELEASEMACHINEDIR}, aborting"; \
+			exit 1; 					\
+		fi; 							\
+		${MKDIR} cdrom/${MACHINE}; 				\
+		curdir=$$(pwd);						\
+		release_destdir=$$(pwd)/cdrom/${MACHINE}; 		\
+		cd ${RELEASEDIR}/${RELEASEMACHINEDIR}; 			\
+		echo Copying $$(pwd) to $$release_destdir ...; 		\
+		${TOOL_PAX} 						\
+			-rw -pe -v 					\
+			${CDRELEASE_EXCLUDE}				\
+			. $$release_destdir; 				\
+		cd $$curdir;						\
+	fi
+	if ${CDSOURCE}; then 						\
+		if [ ! -d ${RELEASEDIR}/source ]; then	 		\
+			echo "Missing ${RELEASEDIR}/source, aborting"; 	\
+			exit 1; 					\
+		fi; 							\
+		${MKDIR} cdrom/source; 					\
+		curdir=$$(pwd);						\
+		release_destdir=$$(pwd)/cdrom/source;	 		\
+		cd ${RELEASEDIR}/source; 				\
+		echo Copying $$(pwd) to $$release_destdir ...;		\
+		${TOOL_PAX} 						\
+			-rw -pe -v 					\
+			. $$release_destdir; 				\
+		cd $$curdir;						\
+	fi
+	if [ "X${CDRUNTIME}}" != "X" ]; then				\
+		curdir=$$(pwd);						\
+		release_destdir=$${curdir}/cdrom;			\
+		cd $$release_destdir;					\
+		cd ${DESTDIR};						\
+		for cde in ${CDRUNTIME};				\
+		do							\
+			${TOOL_PAX} -rw -pp -v $${cde} $$release_destdir;\
+		done;							\
+		cd $$curdir;						\
+	fi
+	if [ "X${CDEXTRA}${CDBUILDEXTRA}" != "X" ]; then		\
+		curdir=`pwd`;						\
+		skipflag="";						\
+		cdextra_skip="${CDEXTRA_SKIP}";				\
+		if [ "X$${cdextra_skip}" != "X" ]; then			\
+			rm -f cdskip;					\
+			for skip in $${cdextra_skip};			\
+			do						\
+				echo $${skip} >> cdskip;		\
+			done;						\
+			skipflag="-X $${curdir}/cdskip";		\
+		fi;							\
+		cdextra="${CDEXTRA}"; 					\
+		cdbuildextra="${CDBUILDEXTRA}"; 			\
+		for cde in $${cdextra} $${cdbuildextra};		\
+		do							\
+			release_destdir=$${curdir}/cdrom;		\
+			if [ -f $${cde} ]; then				\
+				echo Copying $${cde} to $$release_destdir ...;	\
+				${CP} $${cde} $${release_destdir};	\
+			elif [ -d $${cde} ]; then			\
+				cd $${cde};				\
+				echo Copying $$(pwd) to $$release_destdir ...;	\
+				${TOOL_MTREE} -c $${skipflag} |		\
+					${TOOL_PAX} -rw -pe -v -M	\
+					$$release_destdir; 		\
+			else						\
+				echo "Missing $${cde}, aborting"; 	\
+				exit 1; 				\
+			fi; 						\
+			cd $$curdir;					\
+		done;							\
+	fi
+
+image:
+	${TOOL_MAKEFS} -t cd9660 -o ${_CDMAKEFSOPTIONS:Q} ${CDIMAGE} cdrom
+
+.if ${CDRELEASE} == false
+release: prepare .WAIT prepare_md_post .WAIT copy-releasedir .WAIT image_md_pre .WAIT image .WAIT image_md_post
+	${MKDIR} ${RELEASEDIR}/${CDROMS_RELEASEDIR}
+	${RELEASE_INSTALL} ${CDIMAGE} ${RELEASEDIR}/${CDROMS_RELEASEDIR}
+
+iso_image:
+.else
+release:
+
+iso_image: prepare .WAIT prepare_md_post .WAIT copy-releasedir .WAIT image_md_pre .WAIT image .WAIT image_md_post
+	${MKDIR} ${RELEASEDIR}/${CDROMS_RELEASEDIR}
+	${RELEASE_INSTALL} ${CDIMAGE} ${RELEASEDIR}/${CDROMS_RELEASEDIR}
+.endif
+
+clean:
+	${RM} -fr cdrom
+
+prepare_md_post: .PHONY
+image_md_post: .PHONY
+image_md_pre: .PHONY
+
+.include <bsd.prog.mk>
--- a/distrib/common/Makefile.crunch
+++ b/distrib/common/Makefile.crunch
@ -0,0 +1,77 @@
+#	$NetBSD: Makefile.crunch,v 1.24 2008/10/19 22:05:19 apb Exp $
+#
+# Makefile snippet to build a crunchgen(1)ed binary from the provided lists
+#
+# Required variables:
+#	NETBSDSRCDIR	top level of src tree (set by <bsd.own.mk>)
+#	CRUNCHBIN	name of crunchgen(1)ed binary
+#	LISTS		list file(s) to use
+#
+# Optional variables:
+#	SMALLPROG	if != 0, add SMALLPROG=1 to CRUNCHENV.  [default: 1]
+#	SMALLPROG_INET6	if != 0 and SMALLPROG != 0, and ${USE_INET6} != "no",
+#			add SMALLPROG_INET6=1 to CRUNCHENV.  [default: 0]
+#	CRUNCHENV	environment to pass to crunchgen(1) and when building
+#			the crunched program with make(1) (as command line
+#			variables, to override any user provided environment
+#			or make(1) cmdline vars).
+#	CRUNCHGEN_FLAGS	extra options to crunchgen(1)
+#	DESTDIR		destination directory
+#	PARSELISTENV	environment variables to set for parselist.awk
+#
+# Variables modified by this:
+#	CRUNCHENV	may get SMALLPROG=1 or SMALLPROG_INET6=1 added
+#
+
+.if !defined(_MAKEFILE_CRUNCH_)
+_MAKEFILE_CRUNCH_=1
+
+CRUNCHENV+=		AWK=${TOOL_AWK:Q}
+
+SMALLPROG?=		1
+SMALLPROG_INET6?=	0
+.if ${SMALLPROG}				# {
+CRUNCHENV+=		SMALLPROG=1
+.if ${SMALLPROG_INET6} && (${USE_INET6} != "no")
+CRUNCHENV+=		SMALLPROG_INET6=1
+.endif
+.endif						# }
+
+.include "${DISTRIBDIR}/common/Makefile.parselist"
+
+.PHONY:	${CRUNCHBIN}
+${CRUNCHBIN}: ${CRUNCHBIN}.mk ${CRUNCHBIN}.cache ${CRUNCHBIN}.c
+	${MAKE} ${CRUNCHENV} -f ${CRUNCHBIN}.mk ${CRUNCHBIN}.crunched
+
+${CRUNCHBIN}.c: ${CRUNCHBIN}.mk
+	[ ! -f ${.TARGET} ] || touch ${.TARGET}
+
+${CRUNCHBIN}.cache: ${CRUNCHBIN}.mk
+	[ ! -f ${.TARGET} ] || touch ${.TARGET}
+
+CRUNCHGEN != command -v ${TOOL_CRUNCHGEN:[-1]} || echo
+
+${CRUNCHBIN}.mk: ${CRUNCHBIN}.conf  ${CRUNCHGEN}
+	${CRUNCHENV} ${TOOL_CRUNCHGEN} -f -D ${NETBSDSRCDIR} \
+	    -L ${DESTDIR}/usr/lib -q ${CRUNCHGEN_FLAGS} ${CRUNCHBIN}.conf
+
+${CRUNCHBIN}.conf: ${LISTS} ${PARSELISTDEP}
+	-rm -f ${.TARGET} ${.TARGET}.tmp
+	${PARSELIST} -v mode=crunch ${LISTS} > ${.TARGET}.tmp \
+	&& mv ${.TARGET}.tmp ${.TARGET}
+
+CLEANFILES+=	${CRUNCHBIN} ${CRUNCHBIN}.conf ${CRUNCHBIN}.conf.tmp \
+		${CRUNCHBIN}.cache *.o *.cro *.c
+
+clean cleandir distclean: cleancrunchgen
+
+.PHONY: cleancrunchgen
+
+cleancrunchgen:
+	if [ -f ${CRUNCHBIN}.mk ]; then \
+		${MAKE} -f ${CRUNCHBIN}.mk clean; \
+	fi
+	rm -f ${CRUNCHBIN}.mk
+
+
+.endif	# _MAKEFILE_CRUNCH_
--- a/distrib/common/Makefile.dhcpcd
+++ b/distrib/common/Makefile.dhcpcd
@ -0,0 +1,8 @@
+# $NetBSD: Makefile.dhcpcd,v 1.1 2009/04/07 11:49:17 joerg Exp $
+
+IMAGEDEPENDS+= 	\
+	${DESTDIR}/etc/dhcpcd.conf \
+	${DESTDIR}/libexec/dhcpcd-run-hooks \
+	${DESTDIR}/libexec/dhcpcd-hooks/30-hostname
+
+LISTS+=		${DISTRIBDIR}/common/list.dhcpcd
--- a/distrib/common/Makefile.distrib
+++ b/distrib/common/Makefile.distrib
@ -0,0 +1,33 @@
+#	$NetBSD: Makefile.distrib,v 1.9 2012/02/17 00:33:25 riz Exp $
+#
+# Makefile snippet to setup various make variables variables used in distrib/:
+#
+# Variables defined:
+#	DISTRIBDIR	Top level of distrib
+#	DISTRIBREV	NetBSD version without dots, as in "59924"
+#	DISTRIBVER	NetBSD version with dots, as in "5.99.24"
+#	DISTRIBVERDEP	Files to depend on for version/revision vars above
+#
+# Commands defined:
+#	MAKESUMS	runs sets/makesums with the appropriate environment
+#	RELEASE_INSTALL	installs release binaries
+#
+#
+
+.if !defined(_MAKEFILE_DISTRIB_)
+_MAKEFILE_DISTRIB_=1
+
+.include <bsd.sys.mk>		# for HOST_SH
+
+DISTRIBDIR=	${NETBSDSRCDIR}/distrib
+DISTRIBREV!=	${HOST_SH} ${NETBSDSRCDIR}/sys/conf/osrelease.sh -s
+DISTRIBVER!=	${HOST_SH} ${NETBSDSRCDIR}/sys/conf/osrelease.sh
+MODULEVER!=	${HOST_SH} ${NETBSDSRCDIR}/sys/conf/osrelease.sh -k
+DISTRIBVERDEP=	${NETBSDSRCDIR}/sys/sys/param.h \
+		${NETBSDSRCDIR}/sys/conf/osrelease.sh
+
+MAKESUMS=	MAKE=${MAKE:Q} CKSUM=${TOOL_CKSUM:Q} ${HOST_SH} ${DISTRIBDIR}/sets/makesums
+RELEASE_INSTALL=${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -m ${NONBINMODE}
+
+
+.endif	# _MAKEFILE_DISTRIB_
--- a/distrib/common/Makefile.image
+++ b/distrib/common/Makefile.image
@ -0,0 +1,140 @@
+#	$NetBSD: Makefile.image,v 1.31 2009/04/03 22:36:35 perry Exp $
+#
+# Makefile snippet to build a tree from the provided lists,
+# and make an ffs file system image from that tree
+#
+# Required variables:
+#	NETBSDSRCDIR	top level of src tree (set by <bsd.own.mk>)
+#	LISTS		list file(s) to use
+#	IMAGEDEPENDS	depends for ${IMAGE}
+#	IMAGEENDIAN	endianness of ${IMAGE}
+#	IMAGESIZE	size of ${IMAGE}
+#	MTREECONF	mtree specfiles to use to build a master specfile
+#
+# Optional variables:
+#	IMAGE		name of target image
+#	IMAGEPOSTBUILD	operation to run on ${IMAGE} ${.TARGET} after its built
+#			(if this returns non zero, ${.TARGET} is removed)
+#	CRUNCHBIN	name of crunchgen(1)ed binary
+#	DESTDIR		destination directory
+#	MAKEFS_FLAGS	extra options to ${TOOL_MAKEFS}
+#	PARSELISTENV	environment variables to set for parselist.awk
+#	WORKDIR		directory to build image in to 
+#	IMAGETAR	tar.gz file to create containing ${IMAGE}'s contents
+#
+#	IMAGE_RELEASEDIR	where to install ${IMAGE}.gz
+#	IMAGETAR_RELEASEDIR	where to install ${IMAGETAR}
+#
+
+.if !defined(_MAKEFILE_IMAGE_)
+_MAKEFILE_IMAGE_=1
+
+
+WORKDIR?=	work
+WORKSPEC?=	work.spec
+WORKBUILT?=	work.built
+
+.include "${DISTRIBDIR}/common/Makefile.parselist"
+
+PARSELISTENV+=	TARGETDIR=${.OBJDIR}/${WORKDIR:Q}
+
+
+.if !target(${WORKBUILT})					# {
+${WORKBUILT}: ${IMAGEDEPENDS} ${WORKSPEC} ${PARSELISTDEP} ${LISTS}
+#	There is a .PHONY ${CRUNCHBIN}, so check if out of date by hand
+#	Default to `.' if ${CRUNCHBIN} isn't set, to always force a rebuild.
+	[ "${.OODATE}" = ${CRUNCHBIN:U.} -a -f ${WORKBUILT} -a ${WORKBUILT} -nt ${CRUNCHBIN:U.} ]  || { \
+	${_MKSHMSG} "  build " ${.CURDIR:T}/${WORKDIR}; \
+	rm -rf ${WORKDIR} ${WORKBUILT}; \
+	mkdir -m 755 ${WORKDIR} &&  \
+	${TOOL_MTREE} -def ${WORKSPEC} -p ${WORKDIR}/ -UW && \
+	${PARSELIST} -v mode=populate ${LISTS} | \
+	${HOST_SH} -e ${POPULATE_DEBUG} \
+	&& touch ${WORKBUILT} ; \
+	}
+
+CLEANFILES+=	${WORKBUILT}
+
+clean cleandir distclean: cleanfsimage
+
+.PHONY: cleanfsimage
+
+cleanfsimage:
+	-rm -rf ${WORKDIR} ${WORKBUILT}
+
+.endif	# ! target (${WORKBUILT})				# }
+
+.if !target(${WORKSPEC})					# {
+${WORKSPEC}: ${MTREECONF} ${LISTS} ${PARSELISTDEP}
+	${_MKTARGET_CREATE}
+	-rm -f ${.TARGET} ${.TARGET}.tmp
+	( for i in ${MTREECONF}; do	\
+		echo "# --" ; \
+		echo "# entries from: $$i" ; \
+		echo "#" ; \
+		cat $$i ;		\
+		echo "/unset all" ;	\
+	done ) >> ${.TARGET}.tmp
+	${PARSELIST} -v mode=mtree ${LISTS} >> ${.TARGET}.tmp \
+	&& mv ${.TARGET}.tmp ${.TARGET}
+
+CLEANFILES+=	${WORKSPEC} ${WORKSPEC}.tmp
+.endif	# ! target (${WORKSPEC})				# }
+
+.if defined(IMAGE)						# {
+${IMAGE}: ${WORKBUILT}
+	[ "${.OODATE}" = ${WORKBUILT} -a -f ${IMAGE} -a ! ${IMAGE} -ot ${WORKBUILT} ]  || { \
+	${_MKSHMSG_CREATE} ${.CURDIR:T}/${.TARGET}; \
+	rm -f ${.TARGET} ${.TARGET}.tmp; \
+	${TOOL_MAKEFS} -t ffs -B ${IMAGEENDIAN} -s ${IMAGESIZE} -F ${WORKSPEC} \
+	    -N ${NETBSDSRCDIR}/etc -o bsize=4096,fsize=512 \
+	    -o optimization=space,minfree=0 \
+	    ${MAKEFS_FLAGS} ${.TARGET}.tmp ${WORKDIR} \
+	&& mv -f ${.TARGET}.tmp ${.TARGET}; \
+	}
+.if defined(IMAGEPOSTBUILD)
+	${IMAGEPOSTBUILD} || { rm -f ${.TARGET} ; false; }
+.endif
+
+.PHONY: fsimage
+fsimage: ${IMAGE}
+
+${IMAGE}.gz: ${IMAGE}
+	${_MKTARGET_CREATE}
+	-rm -f ${.TARGET}
+	gzip -9nc ${.ALLSRC} > ${.TARGET}
+
+realall: ${IMAGE}
+
+.if defined(IMAGE_RELEASEDIR)
+release:: check_RELEASEDIR .WAIT ${IMAGE}.gz
+	${RELEASE_INSTALL} ${IMAGE}.gz \
+	    ${RELEASEDIR}/${RELEASEMACHINEDIR}/${IMAGE_RELEASEDIR}
+.endif
+
+CLEANFILES+=	${IMAGE} ${IMAGE}.gz ${IMAGE}.tmp
+.endif	# ! defined(IMAGE)					# }
+
+
+.if defined(IMAGETAR)						# {
+${IMAGETAR}: ${WORKBUILT} ${WORKSPEC} ${IMAGEDEPENDS}
+	${_MKTARGET_CREATE}
+	( cd ${WORKDIR}; \
+	  GZIP=-9n ${TOOL_PAX} -ON ${NETBSDSRCDIR}/etc -wdzM <${.OBJDIR}/${WORKSPEC} \
+	) > ${.TARGET}.tmp \
+	&& mv ${.TARGET}.tmp ${.TARGET}
+
+realall: ${IMAGETAR}
+
+CLEANFILES+=	${IMAGETAR} ${IMAGETAR}.tmp
+
+.if defined(IMAGETAR_RELEASEDIR)
+release:: check_RELEASEDIR .WAIT ${IMAGETAR}
+	${RELEASE_INSTALL} ${IMAGETAR} \
+	    ${RELEASEDIR}/${RELEASEMACHINEDIR}/${IMAGETAR_RELEASEDIR}
+.endif
+
+.endif	# ! defined(IMAGETAR)					# }
+
+
+.endif	# _MAKEFILE_IMAGE_
--- a/distrib/common/Makefile.makedev
+++ b/distrib/common/Makefile.makedev
@ -0,0 +1,71 @@
+#	$NetBSD: Makefile.makedev,v 1.18 2012/08/10 05:22:22 matt Exp $
+#
+# Makefile snippet to add ${MAKEDEVTARGETS} devices to the mtree list
+# (if set), otherwise copy .OBJDIR-of-etc/MAKEDEV to ./dev
+#
+# If this is to be used with Makefile.image, then this file should be
+# .include-d first.
+#
+# Required variables:
+#	NETBSDSRCDIR	top level of src tree (set by <bsd.own.mk>)
+#	MACHINE		machine name (set externally by build framework)
+#
+# Optional variables:
+#	MAKEDEVTARGETS	targets to create with .OBJDIR-of-etc/MAKEDEV
+#
+# Variables modified by this:
+#	MAKEDEVSCRIPT	path to .OBJDIR-of-etc/MAKEDEV
+#	MTREECONF	may get "devices.spec" added
+#	LISTS		may get "list.makedev" added
+#	IMAGEDEPENDS	may get ${MAKEDEVSCRIPT} added
+#	PARSELISTENV	may get MAKEDEVSCRIPT=... added
+#
+
+.if !defined(_MAKEFILE_MAKEDEV_)
+_MAKEFILE_MAKEDEV_=1
+
+
+MAKEDEVSPEC?=	devices.spec
+
+_MAKEDEVOBJDIR!=cd ${NETBSDSRCDIR}/etc && ${PRINTOBJDIR}
+MAKEDEVSCRIPT=	${_MAKEDEVOBJDIR}/MAKEDEV
+
+CLEANFILES+=	${MAKEDEVSPEC} ${MAKEDEVSPEC}.tmp
+
+
+.if defined(MAKEDEVTARGETS)
+
+#
+#	MAKEDEVTARGETS is set; add those devices to the mtree spec that's
+#	used to build the file system
+#
+MTREECONF+=	${MAKEDEVSPEC}
+
+${MAKEDEVSPEC}:	${MAKEDEVSCRIPT} Makefile \
+		${NETBSDSRCDIR}/etc/etc.${MACHINE}/MAKEDEV.conf
+		
+	${_MKTARGET_CREATE}
+	rm -f ${.TARGET} ${.TARGET}.tmp
+	MACHINE=${MACHINE:Q} MACHINE_ARCH=${MACHINE_ARCH:Q} \
+	    ${HOST_SH} ${MAKEDEVSCRIPT} -s ${MAKEDEVTARGETS} \
+	    > ${.TARGET}.tmp
+	${TOOL_SED} -e '/^\. type=dir/d' -e 's,^\.,./dev,' ${.TARGET}.tmp \
+	    | sort -o ${.TARGET}
+
+.else	# ! MAKEDEVTARGETS
+
+#
+#	MAKEDEVTARGETS isn't set; copy in /dev/MAKEDEV and rely upon
+#	init(8) to mount an mfs /dev and recreate the devices by
+#	(effectively) running "cd /dev ; ./MAKEDEV all"
+#
+LISTS+=		${DISTRIBDIR}/common/list.makedev
+IMAGEDEPENDS+=	${MAKEDEVSCRIPT}
+PARSELISTENV+=	MAKEDEVSCRIPT=${MAKEDEVSCRIPT:Q}
+
+${MAKEDEVSPEC}:	.PHONY
+
+.endif	# ! MAKEDEVTARGETS
+
+
+.endif	# _MAKEFILE_MAKEDEV_
--- a/distrib/common/Makefile.mdset
+++ b/distrib/common/Makefile.mdset
@ -0,0 +1,182 @@
+#	$NetBSD: Makefile.mdset,v 1.35 2011/01/01 16:56:18 jym Exp $
+#
+# Makefile snippet to ${TOOL_MDSETIMAGE} file system images into kernels
+#
+
+#
+# Required variables:
+#	NETBSDSRCDIR	Top level of src tree (set by <bsd.own.mk>)
+#	MDSETTARGETS	List of images to ${TOOL_MDSETIMAGE} into kernels,
+#			containing one or more tuples of the form:
+#				KERNEL	IMAGE	FILENAME
+#
+#			The kernel is ${TOOL_MDSETIMAGE} with ${IMAGE},
+#			${STRIP}ped (after the symbols are stored in
+#			${FILENAME}.symbols.gz), and gzipped into
+#			${FILENAME}.gz.
+#
+#			If KERNEL does not contain a `/', use
+#			${KERNOBJDIR}/KERNEL/netbsd as the kernel.
+#
+#			If FILENAME is "-", use "netbsd-${KERNEL}" as
+#			the target name.  This may not be a sensible
+#			name if KERNEL contains a `/'.
+#
+# Optional variables:
+#	MDSET_RELEASEDIR		Where to install release kernels.
+#
+#	MDSET_NOGZIP			If defined, don't gzip any kernels.
+#
+#	MDSET_NOGZIP.${FILENAME}	If defined, don't gzip ${FILENAME}
+#
+#	MDSET_NOIMAGE.${FILENAME}	If defined, don't add ${IMAGE} to
+#					${FILENAME}
+#
+#	MDSET_NOSTRIP			If defined, don't strip any kernels.
+#
+#	MDSET_NOSTRIP.${FILENAME}	If defined, don't strip ${FILENAME}
+#
+#	MDSET_NOSYMBOLS			If defined, don't generate *.symbols.gz
+#
+#	MDSET_NOSYMBOLS.${FILENAME}	If defined, don't generate
+#					${FILENAME}.symbols.gz
+#
+#	MDSET_POST			For each kernel,
+#					execute this after ${NM} / ${STRIP}.
+#					Kernel is available as "${.TARGET}"
+#
+#	MDSET_POST.${FILENAME}		For each kernel named ${FILENAME},
+#					execute this after ${NM} / ${STRIP}.
+#					Kernel is available as "${.TARGET}"
+#
+#	MDSET_SUFFIXES.${FILENAME}	List of extra install kernel suffixes
+#					and build commands to create from
+#					${FILENAME} after its created by
+#					${TOOL_MDSETIMAGE} ; ${NM} ; ${STRIP}:
+#						SUFFIX	COMMANDVAR
+#					"${.TARGET}" is "${FILENAME}.${SUFFIX}"
+#					COMMANDVAR is the name of the variable
+#					containing the command to build
+#					${.TARGET}.
+#
+# Variables modified by this:
+#	KERNELS			List of kernel .gz files to build
+#	KERNELSYMS		List of kernel .symbol.gz files to build
+#
+
+.if !defined(_MAKEFILE_MDSET_)
+_MAKEFILE_MDSET_=1
+
+.include <bsd.kernobj.mk>
+
+.for _K _I _F in ${MDSETTARGETS}			# {
+
+_KERNEL:=${_K}			# (work around obscure issue in make(1))
+.if (${_KERNEL:M*/*} != "")
+_KERNNAME.${_K}.${_F}:=	${_K}
+.else
+_KERNNAME.${_K}.${_F}:=	${KERNOBJDIR}/${_K}/netbsd
+.endif
+
+_FILENAME:=${_F}		# (work around obscure issue in make(1))
+.if ${_FILENAME} == "-"
+_KERNEL.${_K}.${_F}:=	netbsd-${_K}
+_FILENAME:=		${_KERNEL.${_K}.${_F}}
+.else
+_KERNEL.${_K}.${_F}:=	${_F}
+.endif
+
+.for _S _C in ${MDSET_SUFFIXES.${_F}}		# {
+CLEANFILES+=	${_KERNEL.${_K}.${_F}}.${_S}
+
+${_KERNEL.${_K}.${_F}}.${_S}: ${_KERNEL.${_K}.${_F}}
+.if defined(${_C})
+	${${_C}}
+.else
+	@echo "No such variable \"${_C}\""
+	false
+.endif
+
+.if defined(MDSET_NOGZIP.${_FILENAME}) && defined(MDSET_NOGZIP)
+KERNELS+=	${_KERNEL.${_K}.${_F}}.${_S}
+.else							# {
+KERNELS+=	${_KERNEL.${_K}.${_F}}.${_S}.gz
+
+${_KERNEL.${_K}.${_F}}.${_S}.gz: ${_KERNEL.${_K}.${_F}}.${_S}
+	${_MKTARGET_CREATE}
+	-rm -f ${.TARGET}
+	gzip -9nc ${.ALLSRC} > ${.TARGET}
+.endif							# }
+
+.endfor							# }
+
+.if !defined(MDSET_NOSYMBOLS.${_FILENAME}) && !defined(MDSET_NOSYMBOLS)
+KERNELSYMS+=	${_KERNEL.${_K}.${_F}}.symbols.gz
+.endif
+
+.if defined(MDSET_POST.${_FILENAME})
+_POST.${_KERNEL.${_K}.${_F}}:= ${MDSET_POST.${_FILENAME}}
+.elif defined(MDSET_POST)
+_POST.${_KERNEL.${_K}.${_F}}:= ${MDSET_POST}
+.endif
+
+
+CLEANFILES+=	${_KERNEL.${_K}.${_F}}
+
+.if defined(MDSET_NOIMAGE.${_FILENAME})
+${_I}=
+.endif
+
+# Darwin requires a special hack - this is documented in
+# doc/HACKS, and just works around the problems described more
+# fully in http://mail-index.netbsd.org/current-users/2008/06/27/msg003242.html
+OPSYS!= uname -s
+.if ${OPSYS} == "Darwin"
+MDSETIMAGEFLAGS=
+.else
+MDSETIMAGEFLAGS=-v
+.endif
+
+${_KERNEL.${_K}.${_F}}: .NOTMAIN ${_KERNNAME.${_K}.${_F}} ${_I}
+	${_MKTARGET_CREATE} "(from: ${.ALLSRC})"
+	@rm -f ${.TARGET} ${.TARGET}.tmp ${.TARGET}.symbols.gz
+	@cp ${_KERNNAME.${_K}.${_F}} ${.TARGET}.tmp
+.if !defined(MDSET_NOIMAGE.${_FILENAME})
+	${TOOL_MDSETIMAGE} ${MDSETIMAGEFLAGS} ${.TARGET}.tmp ${_I}
+.endif
+.if !defined(MDSET_NOSYMBOLS.${_FILENAME}) && !defined(MDSET_NOSYMBOLS)
+	${NM} ${.TARGET}.tmp | gzip -9n > ${.TARGET}.symbols.gz
+.endif
+.if !defined(MDSET_NOSTRIP.${_FILENAME}) && !defined(MDSET_NOSTRIP)
+	${STRIP} -R .comment -R .ident ${.TARGET}.tmp
+.endif
+	@mv ${.TARGET}.tmp ${.TARGET}
+.if defined(MDSET_POST.${_FILENAME}) || defined(MDSET_POST)
+	${_POST.${.TARGET}}
+.endif
+
+.if defined(MDSET_NOGZIP.${_FILENAME}) || defined(MDSET_NOGZIP)
+KERNELS+=	${_KERNEL.${_K}.${_F}}
+.else							# {
+KERNELS+=	${_KERNEL.${_K}.${_F}}.gz
+
+${_KERNEL.${_K}.${_F}}.gz: ${_KERNEL.${_K}.${_F}}
+	${_MKTARGET_CREATE}
+	-rm -f ${.TARGET}
+	gzip -9nc ${.ALLSRC} > ${.TARGET}
+.endif							# }
+
+.endfor							# }
+
+CLEANFILES+=	${KERNELS} ${KERNELSYMS}
+
+realall: ${KERNELS}
+
+.if defined(MDSET_RELEASEDIR)
+release:: check_RELEASEDIR .WAIT ${KERNELS}
+	${RELEASE_INSTALL} ${KERNELS} ${KERNELSYMS} \
+	    ${RELEASEDIR}/${RELEASEMACHINEDIR}/${MDSET_RELEASEDIR}
+.endif
+
+
+.endif	# _MAKEFILE_MDSET_
--- a/distrib/common/Makefile.parselist
+++ b/distrib/common/Makefile.parselist
@ -0,0 +1,28 @@
+#	$NetBSD: Makefile.parselist,v 1.6 2008/10/19 22:05:20 apb Exp $
+#
+# Makefile snippet to setup parselist.awk related variables:
+#	PARSELISTENV	environment variables to pass to parselist.awk
+#			(may be appended to by caller)
+#	PARSELISTDEP	dependency on parselist.awk
+#	PARSELIST	run  ${PARSELISTENV} awk -f ${PARSELISTDEP}
+#
+
+.if !defined(_MAKEFILE_PARSELIST_)
+_MAKEFILE_PARSELIST_=1
+
+
+PARSELISTENV+=	NETBSDSRCDIR=${NETBSDSRCDIR:Q} \
+		CRUNCHBIN=${CRUNCHBIN:Q} \
+		CURDIR=${.CURDIR:Q} \
+		DESTDIR=${DESTDIR:Q} \
+		DISTRIBDIR=${DISTRIBDIR:Q} \
+		MACHINE=${MACHINE:Q} \
+		MACHINE_ARCH=${MACHINE_ARCH:Q} \
+		MAKE=${MAKE:Q} \
+		OBJDIR=${.OBJDIR:Q}
+
+PARSELISTDEP=	${DISTRIBDIR}/common/parselist.awk
+PARSELIST=	${PARSELISTENV} ${TOOL_AWK} -f ${PARSELISTDEP}
+
+
+.endif	# _MAKEFILE_PARSELIST_
--- a/distrib/common/Makefile.tarfloppy
+++ b/distrib/common/Makefile.tarfloppy
@ -0,0 +1,104 @@
+#	$NetBSD: Makefile.tarfloppy,v 1.16 2009/04/03 22:36:35 perry Exp $
+#
+# Makefile snippet to create a set of ustar floppies.
+# Each floppy has an 8KB header, followed by part or all of the ustar archive.
+#
+# Required variables:
+#	NETBSDSRCDIR	Top level of src tree (set by <bsd.own.mk>)
+#	FLOPPYBASE	Basename of floppies. Floppy number ${n} will
+#			be generated as ${FLOPPYBASE}${n}${FLOPPYSUFFIX}
+#	FLOPPYSIZE	Size of floppy in 512 byte blocks.
+#	FLOPPYFILES	Files to write to floppy.
+#			Usually set to "boot ${FLOPPYMETAFILE} netbsd"
+#
+# Optional variables:
+#	FLOPPY_BOOT		Bootstrap to use as "boot".
+#	FLOPPY_BOOT_STRIP	If yes, strip "boot" before use.
+#	FLOPPY_NETBSD		Kernel to to use as "netbsd".
+#	FLOPPYINSTBOOT		Installboot program to use.
+#				USTAR image file is in @IMAGE@.
+#	FLOPPYMAX		Maximum number of floppies to build.
+#				If 1, the final image is installed as
+#				${FLOPPYBASE}${FLOPPYSUFFIX} instead of
+#				${FLOPPYBASE}1${FLOPPYSUFFIX}
+#	FLOPPYMETAFILE		USTAR metafile(s) (optional)
+#	FLOPPYPAD		If defined, pad the last floppy to ${FLOPPYSIZE}
+#	FLOPPYSUFFIX		Suffix of created floppies.
+#	FLOPPY_RELEASEDIR	Where to install release floppies.
+#
+
+.if !defined(_MAKEFILE_TARFLOPPY_)
+_MAKEFILE_TARFLOPPY_=1
+
+
+.if defined(FLOPPY_BOOT)				# {
+CLEANFILES+=	boot
+boot: ${FLOPPY_BOOT}
+	${_MKTARGET_CREATE} "(from: ${.ALLSRC})"
+	@rm -f boot
+	@cp ${.ALLSRC} boot
+.if defined(FLOPPY_BOOT_STRIP)
+	@${STRIP} boot
+.endif
+.endif	# FLOPPY_BOOT					# }
+
+.if defined(FLOPPY_BOOT_CFG)
+CLEANFILES+=	boot.cfg
+boot.cfg:	${FLOPPY_BOOT_CFG}
+	${_MKTARGET_CREATE} "(from: ${.ALLSRC})"
+	@rm -f ${.TARGET}
+	@cp ${.ALLSRC} ${.TARGET}
+.endif	# FLOPPY_BOOT_CFG
+
+.if defined(FLOPPY_NETBSD)				# {
+CLEANFILES+=	netbsd netbsd.tmp
+.if ${FLOPPY_NETBSD:E}=="gz"
+COPY_CMD=	gunzip -c ${.ALLSRC} > ${.TARGET}.tmp
+COMPRESS_CMD=	gzip -9nc ${.TARGET}.tmp > ${.TARGET}; rm -f ${.TARGET}.tmp
+.else
+COPY_CMD=	cp ${.ALLSRC} ${.TARGET}.tmp
+COMPRESS_CMD=	mv -f ${.TARGET}.tmp ${.TARGET}
+.endif
+netbsd: ${FLOPPY_NETBSD}
+	${_MKTARGET_CREATE} "(from: ${.ALLSRC})"
+	${COPY_CMD}
+	${STRIP} -R .comment -R .ident ${.TARGET}.tmp
+	${COMPRESS_CMD}
+.endif	# FLOPPY_NETBSD					# }
+
+
+.if defined(FLOPPYMETAFILE)				# {
+CLEANFILES+=	${FLOPPYMETAFILE}
+${FLOPPYMETAFILE}:
+	${_MKTARGET_CREATE}
+	@rm -f ${FLOPPYMETAFILE}
+	@touch ${FLOPPYMETAFILE}
+.endif	# FLOPPYMETAFILE				# }
+
+
+${FLOPPYBASE}1${FLOPPYSUFFIX}: ${FLOPPYFILES} ${DISTRIBDIR}/common/buildfloppies.sh
+	${_MKTARGET_CREATE} "(from: ${FLOPPYFILES})"
+	PAX=${TOOL_PAX:Q} ${HOST_SH} ${DISTRIBDIR}/common/buildfloppies.sh \
+	    ${FLOPPYINSTBOOT:D-i ${FLOPPYINSTBOOT}} ${FLOPPYPAD:D-p} \
+	    ${FLOPPYMAX:D-m ${FLOPPYMAX}} ${FLOPPYSUFFIX:D-s ${FLOPPYSUFFIX}} \
+	    -N ${DESTDIR}/etc \
+	    ${FLOPPYBASE} ${FLOPPYSIZE} ${FLOPPYFILES}
+
+CLEANFILES+=	${FLOPPYBASE}?${FLOPPYSUFFIX}
+
+
+realall: ${FLOPPYBASE}1${FLOPPYSUFFIX}
+
+.if defined(FLOPPY_RELEASEDIR)
+release:: check_RELEASEDIR .WAIT ${FLOPPYBASE}1${FLOPPYSUFFIX}
+	if [ -e ${FLOPPYBASE}2${FLOPPYSUFFIX} ]; then \
+		${RELEASE_INSTALL} ${FLOPPYBASE}?${FLOPPYSUFFIX} \
+		    ${RELEASEDIR}/${RELEASEMACHINEDIR}/${FLOPPY_RELEASEDIR}; \
+	else \
+		${RELEASE_INSTALL} ${FLOPPYBASE}1${FLOPPYSUFFIX} \
+		    ${RELEASEDIR}/${RELEASEMACHINEDIR}/${FLOPPY_RELEASEDIR}/${FLOPPYBASE}${FLOPPYSUFFIX}; \
+	fi
+.endif
+
+
+.endif	# _MAKEFILE_TARFLOPPY_
--- a/distrib/common/bootimage/Makefile.bootimage
+++ b/distrib/common/bootimage/Makefile.bootimage
@ -0,0 +1,407 @@
+#	$NetBSD: Makefile.bootimage,v 1.6 2012/04/22 07:23:42 tsutsui Exp $
+#
+# Copyright (c) 2009, 2010, 2011 Izumi Tsutsui.  All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#
+# Makefile to create a bootable FS image for USB flash or emulators
+#
+
+#
+# Required variables:
+#	RELEASEDIR
+#		Should be defined in nbmake-${MACHINE}
+#	IMGBASE
+#		Basename of the image
+#
+# Optional variables:
+#	BOOTDISK
+#		device name of target bootable disk specified in /etc/fstab
+#		(default: sd0)
+#	USE_MBR
+#		set yes if target disk image requires MBR partition
+#		(default: no)
+#	MBR_BOOTCODE
+#		optional MBR bootcode which should be installed by fdisk(8)
+#		(default: empty)
+#		- specified MBR_BOOTCODE must exist in ${DESTDIR}/usr/mdec
+#		- if MBR_BOOTCODE is not specified,
+#		  MBR_DEFAULT_BOOTCODE (default: mbr) will be used
+#		  if the target ${MACHINE} has the one in /usr/mdec
+#	USE_SUNLABEL
+#		set yes if target disk image requires Sun's label
+#		(default: no)
+#	INSTALLBOOT_AFTER_DISKLABEL (untested)
+#		set yes if the target ${MACHINE} requires disklabel
+#		to run installboot(8), like hp300
+#		(default: empty)
+#	IMAGEMB
+#		target image size in MB
+#		(default: 2048)
+#	SWAPMB
+#		swap size in target image in MB
+#		(default: 128)
+#	KERN_SET
+#		kernel set name which should be extracted into image
+#		(default: kern-GENERIC)
+#	SETS
+#		binary sets that should be extracted into image
+#		(default: modules base etc comp games man misc tests text
+#			  xbase xcomp xetc xfont xserver)
+#	SETS_DIR
+#		directory path where binary sets are stored
+#		(default: ${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/sets)
+#	IMGFILE_EXTRA
+#		list of additional files to be copied into images,
+#		containing one or more tuples of the form:
+#			FILE	TARGETPATH
+#		for installation image etc.
+#		(default: empty)
+#	IMGDIR_EXTRA
+#		list of additional directories to be copied into images,
+#		containing one or more tuples of the form:
+#			DIR	TARGETPATH
+#		for installation image etc.
+#		(default: empty)
+#		XXX: currently permissions in IMGDIR_EXTRA are not handled
+#	IMGDIR_EXCLUDE
+#		pax(1) options to exclude files which should not copied
+#		into TARGETPATH in IMGDIR_EXTRA
+#		(default: empty)
+#	FSTAB_IN
+#		template file of /etc/fstab
+#		(default: ${DISTRIBDIR}/common/bootimage/fstab.in)
+#	SPEC_IN
+#		default files of spec file for makefs(8)
+#		(default: ${DISTRIBDIR}/common/bootimage/spec.in)
+#	SPEC_EXTRA
+#		additional files of spec file for makefs(8)
+#		(default: empty)
+#	IMGMAKEFSOPTIONS
+#		options passed to makefs(8) to create root file system
+#		(default: -o bsize=16384,fsize=2048,density=8192)
+#	INSTALLBOOTOPTIONS
+#		options passed to installboot(8), e.g., -o console=com0
+#		(default: empty)
+#	PRIMARY_BOOT
+#		primary boot loader that should be installed into
+#		the target image via installboot(8)
+#		(default: empty)
+#	SECONDARY_BOOT
+#		secondary bootloader that should be put into the target image
+#		(default: empty)
+#	SECONDARY_BOOT_ARG
+#		extra arguments that should be passed to installboot(8)
+#		to specify the secondary bootloader
+#		(default: empty)
+#	DISKPROTO_IN
+#		template file of disklabel -R
+#		(default: ${DISTRIBDIR}/common/bootimage/diskproto.in
+#		       or ${DISTRIBDIR}/common/bootimage/diskproto.mbr.in)
+#	OMIT_SWAPIMG
+#		no need to put swap partition into image (for USB stick)
+#		(default: no)
+#
+
+.include <bsd.sys.mk>		# for HOST_SH
+.include <bsd.own.mk> 		#
+.include <bsd.endian.mk>	# for TARGET_ENDIANNESS
+
+.include "${NETBSDSRCDIR}/distrib/common/Makefile.distrib"
+
+.if empty(IMGBASE)
+.BEGIN:
+	@echo "Error: IMGBASE is not set"
+	@false
+.endif
+
+# should be defined elsewhere? 
+CAT?=		cat
+CHMOD?=		chmod
+CP?=		cp
+DD?=		dd
+MKDIR?=		mkdir -p
+RM?=		rm
+
+#
+# common definitions for image
+#
+BOOTDISK?=	sd0
+USE_MBR?=	no
+USE_SUNLABEL?=	no
+INSTALLBOOT_AFTER_DISKLABEL?=	no
+
+#
+# size parameters for image
+#
+IMAGEMB?=	2048		# 2048MB
+SWAPMB?=	128		# 128MB
+
+# XXX: SWAPMB could be zero and expr(1) returns exit status 1 in that case
+IMAGESECTORS!=	expr ${IMAGEMB} \* 1024 \* 1024 / 512
+SWAPSECTORS!=	expr ${SWAPMB} \* 1024 \* 1024 / 512 || true
+
+.if ${USE_MBR} == "no"
+LABELSECTORS?=	0
+.else
+#LABELSECTORS?=	63	# historical
+#LABELSECTORS?=	32	# 16KB aligned
+LABELSECTORS?=	2048	# 1MB aligned for modern flash devices
+.endif
+
+FSSECTORS!=	expr ${IMAGESECTORS} - ${SWAPSECTORS} - ${LABELSECTORS}
+FSSIZE!=	expr ${FSSECTORS} \* 512
+
+# parameters for disklabel and MBR
+HEADS=		64
+SECTORS=	32
+CYLINDERS!=	expr ${IMAGESECTORS} / \( ${HEADS} \* ${SECTORS} \)
+SECPERCYLINDERS!= expr ${HEADS} \* ${SECTORS}
+MBRHEADS=	255
+MBRSECTORS=	63
+MBRCYLINDERS!=	expr ${IMAGESECTORS} / \( ${MBRHEADS} \* ${MBRSECTORS} \)
+MBRNETBSD=	169
+
+BSDPARTSECTORS!= expr ${IMAGESECTORS} - ${LABELSECTORS}
+FSOFFSET=	${LABELSECTORS}
+SWAPOFFSET!=	expr ${LABELSECTORS} + ${FSSECTORS}
+
+# parameters for sunlabel
+FSCYLINDERS!=	expr ${FSSECTORS} / \( ${HEADS} \* ${SECTORS} \)
+SWAPCYLINDERS!=	expr ${SWAPSECTORS} / \( ${HEADS} \* ${SECTORS} \) || true
+
+
+#
+# definitions to create root fs
+#
+SETS_DEFAULT=	modules base etc comp games man misc tests text
+.if ${MKX11} != "no"
+SETS_DEFAULT+=	xbase xcomp xetc xfont xserver
+.endif
+
+KERN_SET?=	kern-GENERIC
+SETS?=		${SETS_DEFAULT}
+IMG_SETS=	${KERN_SET} ${SETS}
+SETS_DIR?=	${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/sets
+
+FSTAB_IN?=	${DISTRIBDIR}/common/bootimage/fstab.in
+SPEC_IN?=	${DISTRIBDIR}/common/bootimage/spec.in
+
+IMGMAKEFSOPTIONS?=	-o bsize=16384,fsize=2048,density=8192
+
+WORKDIR?=       work
+WORKSPEC?=      work.spec
+WORKFSTAB?=	work.fstab
+WORKRCCONF?=	work.rc.conf
+WORKFS?=        work.rootfs
+TARGETFS?=      imgroot.fs
+
+CLEANFILES+=	${WORKSPEC} ${WORKFSTAB} ${WORKRCCONF} ${WORKFS}
+CLEANFILES+=	${TARGETFS}
+
+#
+# create root file system for the image
+#
+${TARGETFS}: prepare_md_post
+	@if [ ! -d ${RELEASEDIR}/${RELEASEMACHINEDIR} ]; then 		\
+		echo "Missing ${RELEASEDIR}/${RELEASEMACHINEDIR}, aborting"; \
+		false; 							\
+	fi;
+	@${MKDIR} ${WORKDIR}
+.for set in ${IMG_SETS}
+	@if [ ! -f ${SETS_DIR}/${set}.tgz ]; then 			\
+		echo "Missing ${SETS_DIR}/${set}.tgz, aborting";	\
+		false; 							\
+	fi
+	@echo Extracting ${set}.tgz ...
+	@(cd ${WORKDIR}; ${TOOL_PAX} -rnz -f ${SETS_DIR}/${set}.tgz .)
+.endfor
+.if defined(SECONDARY_BOOT)
+	@echo Copying secondary boot...
+	${CP} -f ${WORKDIR}/usr/mdec/${SECONDARY_BOOT} ${WORKDIR}
+.endif
+	@echo Preparing /etc/fstab ...
+	${TOOL_SED} "s/@@BOOTDISK@@/${BOOTDISK}/" < ${FSTAB_IN} > ${WORKFSTAB}
+	${CP} ${WORKFSTAB} ${WORKDIR}/etc/fstab
+	@echo Setting rc_configured=YES in /etc/rc.conf ...
+	${TOOL_SED} "s/rc_configured=NO/rc_configured=YES/"		\
+	    < ${WORKDIR}/etc/rc.conf > ${WORKRCCONF}
+	${CP} ${WORKRCCONF} ${WORKDIR}/etc/rc.conf
+.if defined(IMGDIR_EXTRA)
+	@echo Copying extra dirs...
+.for _SRCDIR _TARGET in ${IMGDIR_EXTRA}
+	@if [ ! -d ${_SRCDIR} ]; then 					\
+		echo "${_SRCDIR} is not directory, aborting";		\
+		false; 							\
+	fi
+	${MKDIR} ${WORKDIR}/${_TARGET}
+	(cd ${_SRCDIR} ;						\
+	    ${TOOL_PAX} -rw -pe	-v					\
+	    ${IMGDIR_EXCLUDE}						\
+	    . ${.OBJDIR}/${WORKDIR}/${_TARGET} )
+.endfor
+.endif
+.if defined(IMGFILE_EXTRA)
+	@echo Copying extra files...
+.for _SRC _TARGET in ${IMGFILE_EXTRA}
+	@if [ ! -f ${_SRC} ]; then 					\
+		echo "${_SRC} in IMGFILE_EXTRA not found, aborting";	\
+		false; 							\
+	fi
+	@if [ -f ${_SRC} ]; then 					\
+		echo ${CP} ${_SRC} ${WORKDIR}/${_TARGET};		\
+		${CP} ${_SRC} ${WORKDIR}/${_TARGET};			\
+	fi
+.endfor
+.endif
+	@echo Preparing spec files for makefs...
+	${RM} -f ${WORKSPEC}
+	cat ${WORKDIR}/etc/mtree/* |					\
+	    ${TOOL_SED} -e 's/ size=[0-9]*//' > ${WORKSPEC}
+	${HOST_SH} ${WORKDIR}/dev/MAKEDEV -s all |			\
+	    ${TOOL_SED} -e '/^\. type=dir/d' -e 's,^\.,./dev,' >> ${WORKSPEC}
+	cat ${SPEC_IN} >> ${WORKSPEC}
+.if defined(SECONDARY_BOOT)
+	echo "./${SECONDARY_BOOT} type=file uname=root gname=operator mode=0444" \
+	    >> ${WORKSPEC}
+.endif
+.if defined(SPEC_EXTRA)
+	cat ${SPEC_EXTRA} >> ${WORKSPEC}
+.endif
+	@echo Creating rootfs...
+	# XXX /var/spool/ftp/hidden is unreadable
+	${CHMOD} +r ${WORKDIR}/var/spool/ftp/hidden
+	${TOOL_MAKEFS} -M ${FSSIZE} -m ${FSSIZE}			\
+	    -B ${TARGET_ENDIANNESS}					\
+	    -F ${WORKSPEC} -N ${WORKDIR}/etc				\
+	    ${IMGMAKEFSOPTIONS}						\
+	    ${WORKFS} ${WORKDIR}
+.if !empty(PRIMARY_BOOT) && ${INSTALLBOOT_AFTER_DISKLABEL} == "no"
+	${TOOL_INSTALLBOOT} -v -m ${MACHINE} ${INSTALLBOOTOPTIONS} ${WORKFS} \
+	    ${WORKDIR}/usr/mdec/${PRIMARY_BOOT} ${SECONDARY_BOOT_ARG}
+.endif
+	@echo done.
+	mv ${WORKFS} ${.TARGET}
+
+#
+# definitions to create image
+#
+.if ${USE_MBR} != "no"
+DISKPROTO_IN?=	${DISTRIBDIR}/common/bootimage/diskproto.mbr.in
+.else
+DISKPROTO_IN?=	${DISTRIBDIR}/common/bootimage/diskproto.in
+.endif
+
+MBR_DEFAULT_BOOTCODE?=	mbr
+
+OMIT_SWAPIMG?=	no
+
+WORKMBR?=	work.mbr
+WORKSWAP?=	work.swap
+WORKLABEL?=	work.diskproto
+WORKIMG?=	work.img
+
+CLEANFILES+=	${WORKMBR} ${WORKSWAP}
+CLEANFILES+=	${WORKLABEL}.tmp ${WORKLABEL}
+CLEANFILES+=	${WORKIMG} ${IMGBASE}.img
+
+${WORKLABEL}:
+	${TOOL_SED}							\
+	    -e "s/@@SECTORS@@/${SECTORS}/"				\
+	    -e "s/@@HEADS@@/${HEADS}/"					\
+	    -e "s/@@SECPERCYLINDERS@@/${SECPERCYLINDERS}/"		\
+	    -e "s/@@CYLINDERS@@/${CYLINDERS}/"				\
+	    -e "s/@@IMAGESECTORS@@/${IMAGESECTORS}/"			\
+	    -e "s/@@FSSECTORS@@/${FSSECTORS}/"				\
+	    -e "s/@@FSOFFSET@@/${FSOFFSET}/"				\
+	    -e "s/@@SWAPSECTORS@@/${SWAPSECTORS}/"			\
+	    -e "s/@@SWAPOFFSET@@/${SWAPOFFSET}/"			\
+	    -e "s/@@BSDPARTSECTORS@@/${BSDPARTSECTORS}/"		\
+	    < ${DISKPROTO_IN} > ${WORKLABEL}.tmp
+	mv ${WORKLABEL}.tmp ${WORKLABEL}
+
+${IMGBASE}.img:	${TARGETFS} ${WORKLABEL}
+.if ${USE_MBR} != "no"
+	@echo creating MBR labels...
+	${DD} if=/dev/zero of=${WORKMBR} seek=$$((${IMAGESECTORS} - 1)) count=1
+	${TOOL_FDISK} -f -i -u \
+	    -b ${MBRCYLINDERS}/${MBRHEADS}/${MBRSECTORS}		\
+	    -0 -a -s ${MBRNETBSD}/${FSOFFSET}/${BSDPARTSECTORS}		\
+	    -F ${WORKMBR}
+.if empty(MBR_BOOTCODE)
+	@if [ -f ${WORKDIR}/usr/mdec/${MBR_DEFAULT_BOOTCODE} ]; then 	\
+		echo ${TOOL_FDISK} -f					\
+		    -i -c ${WORKDIR}/usr/mdec/${MBR_DEFAULT_BOOTCODE}	\
+		    -F ${WORKMBR};					\
+		${TOOL_FDISK} -f					\
+		    -i -c ${WORKDIR}/usr/mdec/${MBR_DEFAULT_BOOTCODE}	\
+		    -F ${WORKMBR};					\
+	fi
+.else
+	@if [ ! -f ${WORKDIR}/usr/mdec/${MBR_BOOTCODE} ]; then 		\
+		echo "${MBR_BOOTCODE} is not found in DESTDIR/usr/mdec, aborting"; \
+		false; 							\
+	fi
+	${TOOL_FDISK} -f -i -c ${WORKDIR}/usr/mdec/${MBR_BOOTCODE}	\
+	    -F ${WORKMBR}
+.endif
+	${DD} if=${WORKMBR} count=${LABELSECTORS} |			\
+	    ${CAT} - ${TARGETFS} > ${WORKIMG}
+.else
+	${CP} ${TARGETFS} ${WORKIMG}
+.endif
+.if ${OMIT_SWAPIMG} == "no"
+	${DD} if=/dev/zero of=${WORKSWAP} seek=$$((${SWAPSECTORS} - 1)) count=1
+	${CAT} ${WORKSWAP} >> ${WORKIMG}
+.endif
+.if ${USE_SUNLABEL} != "no"
+	@echo Creating sun disklabel...
+	printf 'V ncyl %d\nV nhead %d\nV nsect %d\na %d %d/0/0\nb %d %d/0/0\nW\n' \
+	    ${CYLINDERS} ${HEADS} ${SECTORS} \
+	    ${FSOFFSET} ${FSCYLINDERS} ${FSCYLINDERS} ${SWAPCYLINDERS} | \
+	    ${TOOL_SUNLABEL} -nq ${WORKIMG}
+.endif
+	${TOOL_DISKLABEL} -R -F ${WORKIMG} ${WORKLABEL}
+.if !empty(PRIMARY_BOOT) && ${INSTALLBOOT_AFTER_DISKLABEL} != "no"
+	${TOOL_INSTALLBOOT} -v -m ${MACHINE} ${INSTALLBOOTOPTOINS} ${WORKIMG} \
+	    ${WORKDIR}/usr/mdec/${PRIMARY_BOOT}
+.endif
+	mv ${WORKIMG} ${.TARGET}
+
+
+CLEANFILES+=	${IMGBASE}.img.gz ${IMGBASE}.img.gz.tmp
+
+${IMGBASE}.img.gz:	${IMGBASE}.img
+	${TOOL_GZIP} -9c ${IMGBASE}.img > ${.TARGET}.tmp
+	mv ${.TARGET}.tmp ${.TARGET}
+
+clean:
+	@if [ -d ${WORKDIR}/var/spool/ftp/hidden ]; then 		\
+		${CHMOD} +r ${WORKDIR}/var/spool/ftp/hidden;		\
+	fi	# XXX
+	${RM} -fr ${WORKDIR}
+
+prepare_md_post: .PHONY
+image_md_post: .PHONY
+image_md_pre: .PHONY
+
+.include <bsd.prog.mk>
--- a/distrib/common/bootimage/Makefile.installimage
+++ b/distrib/common/bootimage/Makefile.installimage
@ -0,0 +1,62 @@
+#	$NetBSD: Makefile.installimage,v 1.3 2012/04/22 07:23:42 tsutsui Exp $
+#
+# Common Makefile to create a bootable installation image for USB flash etc.
+#
+
+#
+# Required variables:
+#	INSTIMGBASE
+#		Basename of the liveimage
+#
+# See Makefile.bootimage for other variables.
+#
+
+.if !target(check_INSTIMGBASE)
+check_INSTIMGBASE: .PHONY .NOTMAIN
+.if !defined(INSTIMGBASE)
+	@echo "Error: INSTIMGBASE is not set"
+	@false
+.else
+	@true
+.endif
+.endif
+
+SWAPMB=		0			# no swap
+OMIT_SWAPIMG=	yes			# nothing to write
+
+KERN_SET?=	kern-GENERIC
+SETS?=		modules base etc
+
+FSTAB_IN?=	${NETBSDSRCDIR}/distrib/common/bootimage/fstab.install.in
+
+.if ${USE_MBR} != "no"
+DISKPROTO_IN?=	${NETBSDSRCDIR}/distrib/common/bootimage/diskproto.noswap.mbr.in
+.else
+DISKPROTO_IN?=	${NETBSDSRCDIR}/distrib/common/bootimage/diskproto.noswap.in
+.endif
+
+# XXX: no permission info for makefs(8)
+IMGDIR_EXTRA=	${RELEASEDIR}/${RELEASEMACHINEDIR}	${RELEASEMACHINEDIR}
+IMGDIR_EXCLUDE= 	-s ',./installation/cdrom.*,,gp'
+IMGDIR_EXCLUDE+=	-s ',./installation/liveimage.*,,gp'
+IMGDIR_EXCLUDE+=	-s ',./installation/installimage.*,,gp'
+
+IMGBASE=        ${INSTIMGBASE}
+
+.include "${NETBSDSRCDIR}/distrib/common/bootimage/Makefile.bootimage"
+
+# INSTIMG_RELEASEDIR specifies where to install ${INSTIMGBASE}.img.gz.
+# This should be passed from etc/Makefile or etc/etc.${MACHINE}/Makefile.inc
+# but also set default here for manual builds.
+INSTIMG_RELEASEDIR?=	${RELEASEMACHINEDIR}/installation/installimage
+
+# should be defined elsewhere? 
+MKDIR?=		mkdir -p
+
+install_image: check_INSTIMGBASE check_RELEASEDIR ${IMGBASE}.img.gz
+	${MKDIR} ${INSTIMG_RELEASEDIR}
+	${RELEASE_INSTALL} ${IMGBASE}.img.gz ${INSTIMG_RELEASEDIR}
+	# note ${MAKESUM} will be calculated in src/etc/Makefile
+
+release:
+
--- a/distrib/common/bootimage/Makefile.liveimage
+++ b/distrib/common/bootimage/Makefile.liveimage
@ -0,0 +1,42 @@
+#	$NetBSD: Makefile.liveimage,v 1.2 2012/01/22 16:50:00 tsutsui Exp $
+#
+# Common Makefile to create a bootable FS image for USB flash or emulators
+#
+
+#
+# Required variables:
+#	LIVEIMGBASE
+#		Basename of the liveimage
+#
+# See Makefile.bootimage for other variables.
+#
+
+.if !target(check_LIVEIMGBASE)
+check_LIVEIMGBASE: .PHONY .NOTMAIN
+.if !defined(LIVEIMGBASE)
+	@echo "Error: LIVEIMGBASE is not set"
+	@false
+.else
+	@true
+.endif
+.endif
+
+IMGBASE=	${LIVEIMGBASE}
+
+.include "${NETBSDSRCDIR}/distrib/common/bootimage/Makefile.bootimage"
+
+# LIVEIMG_RELEASEDIR specifies where to install ${LIVEIMGBASE}.img.gz.
+# This should be passed from etc/Makefile or etc/etc.${MACHINE}/Makefile.inc
+# but also set default here for manual builds.
+LIVEIMG_RELEASEDIR?=	${RELEASEMACHINEDIR}/installation/liveimage
+
+# should be defined elsewhere? 
+MKDIR?=		mkdir -p
+
+live_image: check_LIVEIMGBASE check_RELEASEDIR ${IMGBASE}.img.gz
+	${MKDIR} ${LIVEIMG_RELEASEDIR}
+	${RELEASE_INSTALL} ${IMGBASE}.img.gz ${LIVEIMG_RELEASEDIR}
+	# note ${MAKESUM} will be calculated in src/etc/Makefile
+
+release:
+
--- a/distrib/common/bootimage/diskproto.in
+++ b/distrib/common/bootimage/diskproto.in
@ -0,0 +1,24 @@
+# $NetBSD: diskproto.in,v 1.1 2012/01/22 03:53:30 tsutsui Exp $
+type: ESDI
+disk: image
+label: 
+flags:
+bytes/sector: 512
+sectors/track: @@SECTORS@@
+tracks/cylinder: @@HEADS@@
+sectors/cylinder: @@SECPERCYLINDERS@@
+cylinders: @@CYLINDERS@@
+total sectors: @@IMAGESECTORS@@
+rpm: 3600
+interleave: 1
+trackskew: 0
+cylinderskew: 0
+headswitch: 0           # microseconds
+track-to-track seek: 0  # microseconds
+drivedata: 0 
+
+8 partitions:
+#        size    offset     fstype [fsize bsize cpg/sgs]
+a:    @@FSSECTORS@@ @@FSOFFSET@@ 4.2BSD 1024 8192 16
+b:    @@SWAPSECTORS@@ @@SWAPOFFSET@@ swap
+c:    @@IMAGESECTORS@@ 0 unused 0 0
--- a/distrib/common/bootimage/diskproto.mbr.in
+++ b/distrib/common/bootimage/diskproto.mbr.in
@ -0,0 +1,25 @@
+# $NetBSD: diskproto.mbr.in,v 1.1 2012/01/22 03:53:30 tsutsui Exp $
+type: ESDI
+disk: image
+label: 
+flags:
+bytes/sector: 512
+sectors/track: @@SECTORS@@
+tracks/cylinder: @@HEADS@@
+sectors/cylinder: @@SECPERCYLINDERS@@
+cylinders: @@CYLINDERS@@
+total sectors: @@IMAGESECTORS@@
+rpm: 3600
+interleave: 1
+trackskew: 0
+cylinderskew: 0
+headswitch: 0           # microseconds
+track-to-track seek: 0  # microseconds
+drivedata: 0 
+
+8 partitions:
+#        size    offset     fstype [fsize bsize cpg/sgs]
+a:    @@FSSECTORS@@ @@FSOFFSET@@ 4.2BSD 1024 8192 16
+b:    @@SWAPSECTORS@@ @@SWAPOFFSET@@ swap
+c:    @@BSDPARTSECTORS@@ @@FSOFFSET@@ unused 0 0
+d:    @@IMAGESECTORS@@ 0 unused 0 0
--- a/distrib/common/bootimage/diskproto.noswap.in
+++ b/distrib/common/bootimage/diskproto.noswap.in
@ -0,0 +1,23 @@
+# $NetBSD: diskproto.noswap.in,v 1.1 2012/01/22 03:53:30 tsutsui Exp $
+type: ESDI
+disk: image
+label: 
+flags:
+bytes/sector: 512
+sectors/track: @@SECTORS@@
+tracks/cylinder: @@HEADS@@
+sectors/cylinder: @@SECPERCYLINDERS@@
+cylinders: @@CYLINDERS@@
+total sectors: @@IMAGESECTORS@@
+rpm: 3600
+interleave: 1
+trackskew: 0
+cylinderskew: 0
+headswitch: 0           # microseconds
+track-to-track seek: 0  # microseconds
+drivedata: 0 
+
+8 partitions:
+#        size    offset     fstype [fsize bsize cpg/sgs]
+a:    @@FSSECTORS@@ @@FSOFFSET@@ 4.2BSD 1024 8192 16
+c:    @@IMAGESECTORS@@ 0 unused 0 0
--- a/distrib/common/bootimage/diskproto.noswap.mbr.in
+++ b/distrib/common/bootimage/diskproto.noswap.mbr.in
@ -0,0 +1,24 @@
+# $NetBSD: diskproto.noswap.mbr.in,v 1.1 2012/01/22 03:53:30 tsutsui Exp $
+type: ESDI
+disk: image
+label: 
+flags:
+bytes/sector: 512
+sectors/track: @@SECTORS@@
+tracks/cylinder: @@HEADS@@
+sectors/cylinder: @@SECPERCYLINDERS@@
+cylinders: @@CYLINDERS@@
+total sectors: @@IMAGESECTORS@@
+rpm: 3600
+interleave: 1
+trackskew: 0
+cylinderskew: 0
+headswitch: 0           # microseconds
+track-to-track seek: 0  # microseconds
+drivedata: 0 
+
+8 partitions:
+#        size    offset     fstype [fsize bsize cpg/sgs]
+a:    @@FSSECTORS@@ @@FSOFFSET@@ 4.2BSD 1024 8192 16
+c:    @@BSDPARTSECTORS@@ @@FSOFFSET@@ unused 0 0
+d:    @@IMAGESECTORS@@ 0 unused 0 0
--- a/distrib/common/bootimage/fstab.in
+++ b/distrib/common/bootimage/fstab.in
@ -0,0 +1,5 @@
+/dev/@@BOOTDISK@@a	/		ffs	rw,log		1 1
+/dev/@@BOOTDISK@@b	none		none	sw		0 0
+ptyfs		/dev/pts	ptyfs	rw		0 0
+kernfs		/kern		kernfs	rw,noauto	0 0
+procfs		/proc		procfs	rw,noauto	0 0
--- a/distrib/common/bootimage/fstab.install.in
+++ b/distrib/common/bootimage/fstab.install.in
@ -0,0 +1,2 @@
+/dev/@@BOOTDISK@@a	/		ffs	rw,log		1 1
+tmpfs			/tmp		tmpfs	rw		0 0
--- a/distrib/common/bootimage/spec.in
+++ b/distrib/common/bootimage/spec.in
@ -0,0 +1,5 @@
+# $NetBSD: spec.in,v 1.1 2012/01/22 03:53:30 tsutsui Exp $
+./netbsd	type=file mode=0755 uname=root gname=operator
+./kern		type=dir mode=0755 uname=root gname=operator
+./proc		type=dir mode=0755 uname=root gname=operator
+./tmp		type=dir mode=1777 uname=root gname=operator
--- a/distrib/common/buildfloppies.sh
+++ b/distrib/common/buildfloppies.sh
@ -0,0 +1,213 @@
+#!/bin/sh
+#
+# $NetBSD: buildfloppies.sh,v 1.17 2008/11/12 14:22:16 apb Exp $
+#
+# Copyright (c) 2002-2003 The NetBSD Foundation, Inc.
+# All rights reserved.
+#
+# This code is derived from software contributed to The NetBSD Foundation
+# by Luke Mewburn of Wasabi Systems.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+# set defaults
+#
+: ${PAX=pax}
+prog=${0##*/}
+etcdir=/etc
+
+
+usage()
+{
+	cat 1>&2 << _USAGE_
+Usage: ${prog} [options] base size file [...]
+	-i instboot	eval instboot as a shell command to install a
+			bootstrap.  @IMAGE@ is replaced with with the
+			file name of the floppy image.
+	-m max		maximum number of floppies to build
+	-N etcdir	directory in which to find passwd and group files.
+	-p		pad last floppy to floppy size
+	-s suffix	suffix for floppies
+	base		basename of generated floppies
+	size		size of a floppy in 512 byte blocks
+	file [...]	file(s) to store in the floppies
+_USAGE_
+	exit 1
+}
+
+plural()
+{
+	[ $1 -ne 1 ] && echo "s"
+}
+
+roundup()
+{
+	echo $(( ( $1 + $2 - 1 ) / ( $2 ) ))
+}
+
+
+#	parse and check arguments
+#
+
+while getopts i:m:N:ps: opt; do
+	case ${opt} in
+	i)
+		instboot=${OPTARG} ;;
+	m)
+		maxdisks=${OPTARG} ;;
+	N)
+		etcdir=${OPTARG} ;;
+	p)
+		pad=1 ;;
+	s)
+		suffix=${OPTARG} ;;
+	\?|*)
+		usage
+		;;
+	esac
+done
+
+shift $(( ${OPTIND} - 1 ))
+[ $# -lt 3 ] && usage
+floppybase=$1
+floppysize=$2
+shift 2
+files=$*
+
+#	setup temp file, remove existing images
+#
+floppy=floppy.$$.tar
+trap "rm -f ${floppy}" 0 1 2 3			# EXIT HUP INT QUIT
+rm -f ${floppybase}?${suffix}			# XXX breaks if maxdisks > 9
+
+#	create tar file
+#
+dd if=/dev/zero of=${floppy} bs=8k count=1 2>/dev/null
+(
+	echo ". type=dir optional"
+	for f in ${files}; do
+		echo "./$f type=file uname=root gname=operator mode=0444"
+	done
+) | \
+${PAX} -O -w -b8k -M -N "${etcdir}" -s,^./,, >> ${floppy} || exit 1
+
+#	install bootstrap before the image is split into multiple disks
+#
+if [ -n "$instboot" ]; then
+	instboot=$( echo $instboot | sed -e s/@IMAGE@/${floppy}/ )
+	echo "Running instboot: ${instboot}"
+	eval ${instboot} || exit 1
+fi
+
+#	check size against available number of disks
+#
+set -- $(ls -ln $floppy)
+bytes=$5
+blocks=$(roundup ${bytes} 512)
+	# when calculating numdisks, take into account:
+	#	a) the image already has an 8K tar header prepended
+	#	b) each floppy needs an 8K tar volume header
+numdisks=$(roundup ${blocks}-16 ${floppysize}-16)
+if [ -z "${maxdisks}" ]; then
+	maxdisks=${numdisks}
+fi
+
+#	Try to accurately summarise free space
+#
+msg=
+# First floppy has 8k boot code, the rest an 8k 'multivolume header'.
+# Each file has a 512 byte header and is rounded to a multiple of 512.
+# The archive ends with two 512 byte blocks of zeros.
+# The output file is then rounded up to a multiple of 8k.
+# floppysize is in units of 512-byte blocks; free_space is in bytes.
+free_space=$(($maxdisks * ($floppysize - 16) * 512 - 512 * 2))
+for file in $files; do
+	set -- $(ls -ln $file)
+	file_bytes=$5
+	pad_bytes=$(($(roundup $file_bytes 512) * 512 - $file_bytes))
+	[ "$file_bytes" != 0 -o "$file" = "${file#USTAR.volsize.}" ] &&
+		msg="$msg $file $pad_bytes,"
+	free_space=$(($free_space - 512 - $file_bytes - $pad_bytes))
+done
+echo "Free space in last tar block:$msg"
+
+if [ ${numdisks} -gt ${maxdisks} ]; then
+	# Add in the size of the last item (we really want the kernel) ...
+	excess=$(( 0 - $free_space + $pad_bytes))
+	echo 1>&2 \
+	    "$prog: Image is ${excess} bytes ($(( ${excess} / 1024 )) KB)"\
+	    "too big to fit on ${maxdisks} disk"$(plural ${maxdisks})
+	exit 1
+fi
+
+padto=$(( ${floppysize} * ${maxdisks} ))
+if [ -n "${pad}" ]; then
+	echo \
+	    "Writing $(( ${padto} * 512 )) bytes ($(( ${padto} / 2 )) KB)" \
+	    "on ${numdisks} disk"$(plural ${numdisks})"," \
+	    "padded by ${free_space} bytes" \
+	    "($(( ${free_space} / 1024 )) KB)"
+else
+	echo "Writing ${bytes} bytes ($(( ${blocks} / 2 )) KB)"\
+	    "on ${numdisks} disk"$(plural ${numdisks})"," \
+	    "free space ${free_space} bytes" \
+	    "($(( ${free_space} / 1024 )) KB)"
+fi
+
+#	write disks
+#
+curdisk=1
+image=
+seek=0
+skip=0
+floppysize8k=$(( ${floppysize} / 16 ))
+while [ ${curdisk} -le ${numdisks} ]; do
+	image="${floppybase}${curdisk}${suffix}"
+	echo "Creating disk ${curdisk} to ${image}"
+	if [ ${curdisk} -eq 1 ]; then
+		: > ${image}
+	else
+		echo USTARFS ${curdisk} > ${image}
+	fi
+	count=$(( ${floppysize8k} - ${seek} ))
+	dd bs=8k conv=sync seek=${seek} skip=${skip} count=${count} \
+	    if=${floppy} of=${image} 2>/dev/null
+
+	curdisk=$(( ${curdisk} + 1 ))
+	skip=$(( $skip + $count ))
+	seek=1
+done
+
+#	pad last disk if necessary
+#
+if [ -n "${pad}" ]; then
+	dd if=$image of=$image conv=notrunc conv=sync bs=${floppysize}b count=1
+fi
+
+
+#	final status
+#
+echo "Final result:"
+ls -l ${floppybase}?${suffix}			# XXX breaks if maxdisks > 9
+
+exit 0
--- a/distrib/common/list.dhcpcd
+++ b/distrib/common/list.dhcpcd
@ -0,0 +1,14 @@
+#	$NetBSD: list.dhcpcd,v 1.2 2011/05/31 06:19:11 christos Exp $
+#
+# list file (c.f. parselist.awk) for DHCP-enabled install media.
+#
+
+PROG	sbin/dhcpcd
+SPECIAL	dhcpcd srcdir external/bsd/dhcpcd/sbin/dhcpcd
+
+COPY	${DESTDIR}/etc/dhcpcd.conf etc/dhcpcd.conf
+COPY	${DESTDIR}/libexec/dhcpcd-run-hooks libexec/dhcpcd-run-hooks 555
+
+COPY	${NETBSDSRCDIR}/distrib/common/10-resolv.conf libexec/dhcpcd-hooks/10-resolv.conf
+COPY	${DESTDIR}/libexec/dhcpcd-hooks/30-hostname libexec/dhcpcd-hooks/30-hostname
+COPY	${NETBSDSRCDIR}/distrib/common/99-print-sysinst libexec/dhcpcd-hooks/99-print-sysinst
--- a/distrib/common/list.inet6
+++ b/distrib/common/list.inet6
@ -0,0 +1,6 @@
+#	$NetBSD: list.inet6,v 1.1 2009/09/20 22:50:50 abs Exp $
+
+PROG	sbin/ping6
+PROG	sbin/rtsol
+
+SPECIAL	ping6		srcdir	distrib/utils/x_ping6
--- a/distrib/common/list.makedev
+++ b/distrib/common/list.makedev
@ -0,0 +1,3 @@
+#	$NetBSD: list.makedev,v 1.7 2007/03/03 06:40:06 apb Exp $
+
+COPY	${MAKEDEVSCRIPT}	dev/MAKEDEV		555
--- a/distrib/common/list.sysinst
+++ b/distrib/common/list.sysinst
@ -0,0 +1,17 @@
+#	$NetBSD: list.sysinst,v 1.12 2005/08/27 15:42:56 xtraeme Exp $
+#
+# list file (c.f. parselist.awk) for sysinst-using install media.
+#
+# NOTE:	sysinst needs at least 4 free inodes and a few KB of free disk space.
+#
+
+PROG	sysinst
+PROG	usr/bin/progress
+
+SPECIAL	sysinst	srcdir	distrib/utils/sysinst/arch/${MACHINE}
+
+# Foreign texts for sysinst
+COPY	${OBJDIR}/sysinst/sysinstmsgs.fr	sysinstmsgs.fr
+COPY	${OBJDIR}/sysinst/sysinstmsgs.de	sysinstmsgs.de
+COPY	${OBJDIR}/sysinst/sysinstmsgs.pl	sysinstmsgs.pl
+COPY	${OBJDIR}/sysinst/sysinstmsgs.es	sysinstmsgs.es
--- a/distrib/common/list.sysinst.en
+++ b/distrib/common/list.sysinst.en
@ -0,0 +1,11 @@
+#	$NetBSD: list.sysinst.en,v 1.1 2004/04/18 20:04:26 dsl Exp $
+#
+# list file (c.f. parselist.awk) for sysinst-using install media.
+#
+# NOTE:	sysinst needs at least 4 free inodes and a few KB of free disk space.
+#
+
+PROG	sysinst
+PROG	usr/bin/progress
+
+SPECIAL	sysinst	srcdir	distrib/utils/sysinst/arch/${MACHINE}
--- a/distrib/common/list2sh.awk
+++ b/distrib/common/list2sh.awk
@ -0,0 +1,55 @@
+#	$NetBSD: list2sh.awk,v 1.1 2009/09/18 09:24:59 abs Exp $
+
+BEGIN {
+	printf("cd ${CURDIR}\n");
+	printf("\n");
+}
+/^$/ || /^#/ {
+	print $0;
+	next;
+}
+$1 == "COPY" {
+	printf("echo '%s'\n", $0);
+	printf("rm -f ${TARGDIR}/%s\n", $3);
+	printf("cp %s ${TARGDIR}/%s\n", $2, $3);
+	next;
+}
+$1 == "LINK" {
+	printf("echo '%s'\n", $0);
+	printf("rm -f ${TARGDIR}/%s\n", $3);
+	printf("(cd ${TARGDIR}; ln %s %s)\n", $2, $3);
+	next;
+}
+$1 == "SYMLINK" {
+	printf("echo '%s'\n", $0);
+	printf("rm -f ${TARGDIR}/%s\n", $3);
+	printf("(cd ${TARGDIR}; ln -s %s %s)\n", $2, $3);
+	next;
+}
+$1 == "COPYDIR" {
+	printf("echo '%s'\n", $0);
+	printf("(cd ${TARGDIR}/%s && find . ! -name . | xargs /bin/rm -rf)\n",
+	    $3);
+	printf("(cd %s && find . ! -name . | cpio -pdamu ${TARGDIR}/%s)\n", $2,
+	    $3);
+	next;
+}
+$1 == "SPECIAL" {
+	printf("echo '%s'\n", $0);
+	printf("(cd ${TARGDIR};");
+	for (i = 2; i <= NF; i++)
+		printf(" %s", $i);
+	printf(")\n");
+	next;
+}
+{
+	printf("echo '%s'\n", $0);
+	printf("echo 'Unknown keyword \"%s\" at line %d of input.'\n", $1, NR);
+	printf("exit 1\n");
+	exit 1;
+}
+END {
+	printf("\n");
+	printf("exit 0\n");
+	exit 0;
+}
--- a/distrib/common/mkprotocols
+++ b/distrib/common/mkprotocols
@ -0,0 +1,7 @@
+#!/bin/sh
+#	$NetBSD: mkprotocols,v 1.1 2008/05/01 22:01:16 garbled Exp $
+# Generate a shaved down protocols file for install media.
+#
+echo "#	\$NetBSD\$" > protocols
+echo "# Shaved down /etc/protocols for installation media" >> protocols
+/usr/bin/sed -e 's/#.*//' -e '/^$/d' -e 's/ *$//' -e 's/  */ /' ../../etc/protocols >> protocols
--- a/distrib/common/mtree.common
+++ b/distrib/common/mtree.common
@ -0,0 +1,28 @@
+#	$NetBSD: mtree.common,v 1.9 2009/04/07 11:49:17 joerg Exp $
+
+/set				type=dir uname=root gname=operator mode=0755
+
+.
+./bin
+./dev
+./etc
+./libexec
+./libexec/dhcpcd-hooks
+./mnt
+./mnt2
+./kern
+./sbin
+./targetroot
+./tmp				mode=01777
+./usr
+./usr/bin
+./usr/mdec
+./usr/sbin
+./usr/share
+./usr/share/misc
+./var
+./var/db
+./var/run
+./var/log
+./var/spool
+./var/spool/lock
--- a/distrib/common/mtree.dot
+++ b/distrib/common/mtree.dot
@ -0,0 +1,3 @@
+#	$NetBSD: mtree.dot,v 1.1 2002/05/03 14:20:54 lukem Exp $
+
+.				type=dir uname=root gname=operator mode=0755
--- a/distrib/common/parselist.awk
+++ b/distrib/common/parselist.awk
@ -0,0 +1,359 @@
+#	$NetBSD: parselist.awk,v 1.16 2009/04/10 16:16:12 apb Exp $
+#
+# Copyright (c) 2002 The NetBSD Foundation, Inc.
+# All rights reserved.
+#
+# This code is derived from software contributed to The NetBSD Foundation
+# by Luke Mewburn of Wasabi Systems.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+#
+# awk -f parselist.awk -v mode=MODE [var=val ...] file1 [...]
+#
+#	Parse list files file1 [...], generating different output,
+#	depending upon the value of MODE:
+#
+#	    crunch	crunchgen(1) config
+#
+#	    install	make(1) Makefile to install commands into ${TARGETDIR},
+#			with an `install' target.
+#			The following environment variables need to be set:
+#			    TARGETDIR	Directory to populate
+#
+#	    mtree	mtree(8) specfile
+#
+#	    populate	sh(1) commands to populate ${TARGETDIR} from ${CURDIR}
+#			The following environment variables need to be set:
+#			    CURDIR	Source directory; make(1)'s ${.CURDIR}
+#			    TARGETDIR	Directory to populate
+#
+#	The following environment variables need to be set for all modes:
+#	    CRUNCHBIN	Name of crunchgen(1) target binary
+#	    OBJDIR	Object directory; make(1)'s ${.OBJDIR}
+#
+# 	Each line of the input is either a comment (starts with `#'),
+#	or contains one of the following keywords and arguments.
+#
+#	Before each line is parsed for a keyword, words surrounded by
+#	"${" and "}", and containing only letters, numbers, and `_'
+#	will be replaced by the value of the environment variable of
+#	the same name.  I.e., "${MACHINE_ARCH}" will be replaced with the
+#	value of ENVIRON["MACHINE_ARCH"].
+#
+#	mode key	operation
+#	--------	---------
+#	C		crunch
+#	I		install
+#	M		mtree
+#	P		populate
+#
+#	mode	keyword arg1 [...]	description
+#	----	------------------	-----------
+#
+#	C	ARGVLN	prog link	as per crunchgen(1) `ln'
+#
+#	P	CMD	arg1 [...]	run CMD as a shell command
+#
+#	IMP	COPY	src dest [perm]	copy src to dest. perm defaults to 0444
+#
+#	IMP	COPYDIR	src dest	recursively copy files under src to
+#					dest.  for M, dest is listed first,
+#					followed by the subdirectories in src.
+#					copied directories have mode 0755.
+#					copied files have mode 0444.
+#
+#	C	LIBS	libspec ...	as per crunchgen(1) `libs'
+#
+#	IMP	LINK	src d1 [d2 ...]	hard link src to d1, d2, ...
+#
+#	M	MTREE	arg1 [...]	output arguments `as-is' to specfile
+#
+#	CIMP	PROG	prog [links...]	program(s) to crunch/mtree/populate.
+#					for I, M & P, the first prog listed
+#					is copied from ${OBJDIR}/${CRUNCHBIN}
+#					and then used as the name to link
+#					all other PROG entries to.
+#
+#	C	SPECIAL	prog cmd ...	as per crunchgen(1) `special'
+#
+#	C	SRCDIRS	dirname ...	as per crunchgen(1) `srcdirs'
+#
+#	IMP	SYMLINK src dest [...]	symlink src to dest, [...]
+#
+
+BEGIN \
+{
+	crunchprog = "";
+
+	if (mode != "crunch" && mode != "install" &&
+	    mode != "mtree" && mode != "populate")
+		errx("Unknown parselist mode '" mode "'");
+
+	needvars["CRUNCHBIN"]++
+	needvars["OBJDIR"]++
+	if (mode == "install") {
+		needvars["TARGETDIR"]++
+	}
+	else if (mode == "populate") {
+		needvars["CURDIR"]++
+	}
+	for (nv in needvars) {
+		if (! (nv in ENVIRON))
+			errx("Environment variable " nv " not defined");
+	}
+
+	print "#";
+	print "# This file is automatically generated by";
+	print "#\tparselist mode=" mode;
+	print "#";
+	print "";
+	if (mode == "install") {
+		print ".include <bsd.own.mk>"
+		print "install:"
+	} else if (mode == "mtree") {
+		print "/unset\tall";
+		print "/set\ttype=file uname=root gname=operator";
+		print;
+	} else if (mode == "populate") {
+		print "cd " ENVIRON["CURDIR"];
+		print;
+	}
+}
+
+/^$/ || /^#/ \
+{
+	print;
+	next;
+}
+
+#	replace ${FOO} with ENVIRON["FOO"]
+#
+/\$\{[A-Za-z0-9_]+\}/ \
+{
+	while (match($0, /\$\{[A-Za-z0-9_]+\}/) > 0) {
+		v = substr($0, RSTART + 2, RLENGTH - 3);
+		if (! (v in ENVIRON))
+			err("Variable " v " is not in the environment");
+		else
+			sub(/\$\{[A-Za-z0-9_]+\}/, ENVIRON[v]);
+	}
+}
+
+$1 == "COPY" \
+{
+	if (NF < 3 || NF > 4)
+		err("Usage: COPY src dest [perm]");
+	if (mode == "install" || mode == "mtree" || mode == "populate")
+		copy($2, $3, $4);
+	next;
+}
+
+$1 == "COPYDIR" \
+{
+	if (NF != 3)
+		err("Usage: COPYDIR src dest");
+	srcdir=$2;
+	destdir=$3;
+	if (mode == "mtree") {
+		printf("./%s type=dir mode=755\n", destdir);
+		command="cd " srcdir " && find . -type d -print"
+		while (command | getline dir) {
+			gsub(/^\.\//, "", dir);
+			if (dir == ".")
+				continue;
+			printf("./%s/%s type=dir mode=755\n", destdir, dir);
+		}
+		close(command);
+	}
+	if (mode == "install" || mode == "mtree" || mode == "populate") {
+		command="cd " srcdir " && find . -type f -print"
+		while (command | getline srcfile) {
+			gsub(/^\.\//, "", srcfile);
+			copy(srcdir "/" srcfile, destdir "/" srcfile, "");
+		}
+		close(command);
+	}
+	next;
+}
+
+$1 == "LIBS" || $1 == "SPECIAL" || $1 == "SRCDIRS" \
+{
+	if (NF < 2)
+		err("Usage: " $1 " args...");
+	if (mode == "crunch") {
+		$1 = tolower($1);
+		print;
+	}
+	next;
+}
+
+$1 == "PROG" \
+{
+	if (NF < 2)
+		err("Usage: PROG prog [link ...]");
+	if (mode == "crunch") {
+		prog = basename($2);
+		print "progs " prog;
+		for (i = 3; i <= NF; i++)
+			print "ln " prog " " basename($i);
+	} else {
+		for (i = 2; i <= NF; i++) {
+			if (crunchprog == "") {
+				crunchprog = $i;
+				copy(ENVIRON["OBJDIR"] "/" ENVIRON["CRUNCHBIN"],
+				    crunchprog, 555);
+				continue;
+			}
+			link(crunchprog, $i, 555);
+		}
+	}
+	next;
+}
+
+$1 == "ARGVLN" \
+{
+	if (NF != 3)
+		err("Usage: ARGVLN prog link");
+	if (mode == "crunch") {
+		$1 = "ln";
+		print;
+	}
+	next;
+}
+
+$1 == "LINK" \
+{
+	if (NF < 3)
+		err("Usage: LINK prog link [...]");
+	if (mode == "install" || mode == "mtree" || mode == "populate") {
+		for (i = 3; i <= NF; i++)
+			link($2, $i, 444);
+	}
+	next;
+}
+
+$1 == "SYMLINK" \
+{
+	if (NF < 3)
+		err("Usage: SYMLINK prog link [...]");
+	if (mode == "install" || mode == "mtree" || mode == "populate") {
+		for (i = 3; i <= NF; i++)
+			symlink($2, $i);
+	}
+	next;
+}
+
+$1 == "CMD" \
+{
+	if (NF < 2)
+		err("Usage: CMD ...");
+	if (mode == "populate") {
+		printf("(cd %s;", ENVIRON["TARGETDIR"]);
+		for (i = 2; i <= NF; i++)
+			printf(" %s", $i);
+		print ") || exit 1";
+	}
+	next;
+}
+
+$1 == "MTREE" \
+{
+	if (NF < 2)
+		err("Usage: MTREE ...");
+	if (mode == "mtree") {
+		sub(/^[^ \t]+[ \t]+/, "");	# strip first word ("MTREE")
+		print;
+	}
+	next;
+}
+
+
+{
+	err("Unknown keyword '" $1 "'");
+}
+
+
+function basename (file) \
+{
+	gsub(/[^\/]+\//, "", file);
+	return file;
+}
+
+function copy (src, dest, perm) \
+{
+	if (perm == "")
+		perm = 444;
+	if (mode == "install") {
+		printf("\t${INSTALL_FILE} -o ${BINOWN} -g ${BINGRP}" \
+		    " -m %s %s %s/%s\n",
+		    perm, src, ENVIRON["TARGETDIR"], dest)
+	} else if (mode == "mtree") {
+		printf("./%s mode=%s\n", dest, perm);
+	} else {
+		printf("rm -rf %s/%s\n", ENVIRON["TARGETDIR"], dest);
+		printf("cp %s %s/%s\n", src, ENVIRON["TARGETDIR"], dest);
+		printf("chmod %s %s/%s\n", perm, ENVIRON["TARGETDIR"], dest);
+	}
+}
+
+function link (src, dest, perm) \
+{
+	if (mode == "install") {
+		printf("\t${INSTALL_LINK} -o ${BINOWN} -g ${BINGRP}" \
+		    " -m %s %s/%s %s/%s\n",
+		    perm, ENVIRON["TARGETDIR"], src, ENVIRON["TARGETDIR"], dest)
+	} else if (mode == "mtree") {
+		printf("./%s mode=%s\n", dest, perm);
+	} else {
+		printf("rm -rf %s/%s\n", ENVIRON["TARGETDIR"], dest);
+		printf("(cd %s; ln %s %s) || exit 1\n",
+		    ENVIRON["TARGETDIR"], src, dest);
+	}
+}
+
+function symlink (src, dest) \
+{
+	if (mode == "install") {
+		printf("\t${INSTALL_SYMLINK} %s/%s %s/%s\n",
+		    ENVIRON["TARGETDIR"], src, ENVIRON["TARGETDIR"], dest)
+	} else if (mode == "mtree") {
+		printf("./%s type=link link=%s\n", dest, src);
+	} else {
+		printf("rm -rf %s/%s\n", ENVIRON["TARGETDIR"], dest);
+		printf("(cd %s; ln -s %s %s) || exit 1\n",
+		    ENVIRON["TARGETDIR"], src, dest);
+	}
+}
+
+function err(msg) \
+{
+	printf("parselist: %s at line %d of input.\n", msg, NR) >"/dev/stderr";
+	exit 1;
+}
+
+function errx(msg) \
+{
+	printf("parselist: %s.\n", msg) >"/dev/stderr";
+	exit 1;
+}
--- a/distrib/common/protocols
+++ b/distrib/common/protocols
@ -0,0 +1,137 @@
+#	$NetBSD: protocols,v 1.1 2008/05/01 22:02:54 garbled Exp $
+# Shaved down /etc/protocols for installation media
+hopopt 0 HOPOPT
+icmp 1 ICMP
+igmp 2 IGMP
+ggp 3 GGP
+ip 4 IP
+st 5 ST
+tcp 6 TCP
+cbt 7 CBT
+egp 8 EGP
+igp 9 IGP
+bbn-rcc-mon 10 BBN-RCC-MON
+nvp-ii 11 NVP-II
+pup 12 PUP
+argus 13 ARGUS
+emcon 14 EMCON
+xnet 15 XNET
+chaos 16 CHAOS
+udp 17 UDP
+mux 18 MUX
+dcn-meas 19 DCN-MEAS
+hmp 20 HMP
+prm 21 PRM
+xns-idp 22 XNS-IDP
+trunk-1 23 TRUNK-1
+trunk-2 24 TRUNK-2
+leaf-1 25 LEAF-1
+leaf-2 26 LEAF-2
+rdp 27 RDP
+irtp 28 IRTP
+iso-tp4 29 ISO-TP4
+netblt 30 NETBLT
+mfe-nsp 31 MFE-NSP
+merit-inp 32 MERIT-INP
+dccp 33 DCCP
+3pc 34 3PC
+idpr 35 IDPR
+xtp 36 XTP
+ddp 37 DDP
+idpr-cmtp 38 IDPR-CMTP
+tp++ 39 TP++
+il 40 IL
+ipv6 41 IPv6
+sdrp 42 SDRP
+ipv6-route 43 IPv6-Route
+ipv6-frag 44 IPv6-Frag
+idrp 45 IDRP
+rsvp 46 RSVP
+gre 47 GRE
+dsr 48 DSR
+bna 49 BNA
+esp 50 ESP
+ah 51 AH
+i-nlsp 52 I-NLSP
+swipe 53 SWIPE
+narp 54 NARP
+mobile 55 MOBILE
+tlsp 56 TLSP
+skip 57 SKIP
+ipv6-icmp 58 IPv6-ICMP
+ipv6-nonxt 59 IPv6-NoNxt
+ipv6-opts 60 IPv6-Opts
+cftp 62 CFTP
+sat-expak 64 SAT-EXPAK
+kryptolan 65 KRYPTOLAN
+rvd 66 RVD
+ippc 67 IPPC
+sat-mon 69 SAT-MON
+visa 70 VISA
+ipcv 71 IPCV
+cpnx 72 CPNX
+cphb 73 CPHB
+wsn 74 WSN
+pvp 75 PVP
+br-sat-mon 76 BR-SAT-MON
+sun-nd 77 SUN-ND
+wb-mon 78 WB-MON
+wb-expak 79 WB-EXPAK
+iso-ip 80 ISO-IP
+vmtp 81 VMTP
+secure-vmtp 82 SECURE-VMTP
+vines 83 VINES
+ttp 84 TTP
+nsfnet-igp 85 NSFNET-IGP
+dgp 86 DGP
+tcf 87 TCF
+eigrp 88 EIGRP
+ospfigp 89 OSPFIGP
+sprite-rpc 90 Sprite-RPC
+larp 91 LARP
+mtp 92 MTP
+ax.25 93 AX.25
+ipip 94 IPIP
+micp 95 MICP
+scc-sp 96 SCC-SP
+etherip 97 ETHERIP
+encap 98 ENCAP
+gmtp 100 GMTP
+ifmp 101 IFMP
+pnni 102 PNNI
+pim 103 PIM
+aris 104 ARIS
+scps 105 SCPS
+qnx 106 QNX
+a/n 107 A/N
+ipcomp 108 IPComp
+snp 109 SNP
+compaq-peer 110 Compaq-Peer
+ipx-in-ip 111 IPX-in-IP
+vrrp 112 VRRP
+pgm 113 PGM
+l2tp 115 L2TP
+ddx 116 DDX
+iatp 117 IATP
+stp 118 STP
+srp 119 SRP
+uti 120 UTI
+smp 121 SMP
+sm 122 SM
+ptp 123 PTP
+isis 124 ISIS
+fire 125 FIRE
+crtp 126 CRTP
+crudp 127 CRUDP
+sscopmce 128 SSCOPMCE
+iplt 129 IPLT
+sps 130 SPS
+pipe 131 PIPE
+sctp 132 SCTP
+fc 133 FC
+rsvp-e2e-ignore 134 RSVP-E2E-IGNORE
+mobility 135 Mobility
+udplite 136 UDPLite
+mpls-in-ip 137 MPLS-in-IP
+use 253 Use
+use 254 Use
--- a/distrib/common/runlist.sh
+++ b/distrib/common/runlist.sh
@ -0,0 +1,13 @@
+#	$NetBSD: runlist.sh,v 1.1 2009/09/18 09:24:59 abs Exp $
+
+if [ "X$1" = "X-d" ]; then
+	SHELLCMD=cat
+	shift
+else
+	SHELLCMD="sh -e"
+fi
+
+( while [ "X$1" != "X" ]; do
+	cat $1
+	shift
+done ) | awk -f ${NETBSDSRCDIR}/distrib/common/list2sh.awk | ${SHELLCMD}
--- a/distrib/common/services
+++ b/distrib/common/services
@ -0,0 +1,47 @@
+# $NetBSD: services,v 1.4 2009/09/20 19:41:35 abs Exp $
+# Minimal /etc/services file for install
+ftp-data	20/tcp
+ftp-data	20/udp
+ftp	21/tcp
+ftp	21/udp
+bootps	67/tcp
+bootps	67/udp
+bootpc	68/tcp
+bootpc	68/udp
+tftp	69/tcp
+tftp	69/udp
+http	80/tcp
+sunrpc	111/tcp
+sunrpc	111/udp
+sftp	115/tcp
+sftp	115/udp
+mftp	349/tcp
+mftp	349/udp
+shell	514/tcp
+kshell	544/tcp
+kshell	544/udp
+dhcpv6-client	546/tcp
+dhcpv6-client	546/udp
+dhcpv6-server	547/tcp
+dhcpv6-server	547/udp
+ftp-agent	574/tcp
+ftp-agent	574/udp
+dhcp-failover	647/tcp
+dhcp-failover	647/udp
+ftps-data	989/tcp
+ftps-data	989/udp
+ftps	990/tcp
+ftps	990/udp
+tftp-mcast	1758/tcp
+tftp-mcast	1758/udp
+nfs	2049/tcp
+nfs	2049/udp
+tftps	3713/tcp
+tftps	3713/udp
+kftp-data	6620/tcp
+kftp-data	6620/udp
+kftp	6621/tcp
+kftp	6621/udp
+mcftp	6622/tcp
+mcftp	6622/udp
+
--- a/distrib/common/sunbootcd.sh
+++ b/distrib/common/sunbootcd.sh
@ -0,0 +1,134 @@
+#! /bin/sh
+#
+# $NetBSD: sunbootcd.sh,v 1.6 2012/02/22 16:12:34 martin Exp $
+#
+# Copyright (c) 2003 The NetBSD Foundation, Inc.
+# All rights reserved.
+#
+# This code is derived from software contributed to The NetBSD Foundation
+# by Luke Mewburn.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+: ${SUNLABEL:=sunlabel}		# sunlabel(8)
+: ${CYLSIZE:=640}		# Cylinder size, in 512byte blocks
+
+PROGNAME=${0##*/}
+FORMAT="%-8s offset %4d, size %4d, file %s\n"
+
+
+usage()
+{
+	cat 1>&2 << _USAGE_
+Usage: ${PROGNAME} fsimage sun4 [sun4c [sun4m [sun3|sun4d [sun3x|sun4u]]]]
+	Combine file system partitions for Sun Microsystems, Inc. computers
+	into a CD-ROM file system image suitable for booting on the
+	following platforms:
+		NetBSD/sun3:	sun3, sun3x
+		NetBSD/sparc:	sun4, sun4c, sun4d, sun4m
+		NetBSD/sparc64:	sun4u
+	The architecture arguments must be bootable file system image
+	for that architecture, or \`-' if no entry is desired.
+	\`fsimage' is typically an iso9660 file system image, although
+	any type of file system can be used as long as the first 512
+	bytes of the image are not used.  \`fsimage' is modified, and
+	the additional partitions are added in order.  If the same
+	filename is used more than once for different architectures,
+	it will only be copied once.
+_USAGE_
+	exit 1
+}
+
+if [ $# -lt 2 -o $# -gt 6 ]; then
+	usage
+fi
+
+for curfile in $*; do
+	[ "$curfile" = "-" ] && continue
+	if [ ! -f "$curfile" ]; then
+		echo 1>&2 "${PROGNAME}: ${curfile}: No such file."
+		exit 1
+	fi
+done
+
+ISOIMAGE="$1";	shift
+
+ISOSIZE=$( ls -l "${ISOIMAGE}" | awk '{print $5}' )
+ISOBLKS=$(( (${ISOSIZE} + 511) / 512 ))
+ISOCYLS=$(( (${ISOBLKS} + (${CYLSIZE} - 1)) / ${CYLSIZE} ))
+
+printf "${FORMAT}" "fsimage:" 0 ${ISOCYLS} "${ISOIMAGE}"
+
+ENDCYL=${ISOCYLS}
+curpart=0
+for curfile in $*; do
+	curpart=$(( ${curpart} + 1 ))
+	[ "$curfile" = "-" ] && continue
+
+	tpart=1
+	curoff=${ENDCYL}
+	while [ ${tpart} -lt ${curpart} ]; do
+		tfile=$(eval echo \$PART${tpart}FILE)
+		if [ "${curfile}" = "${tfile}" ]; then
+			curoff=$(eval echo \$PART${tpart}OFF)
+			break
+		fi
+		tpart=$(( ${tpart} + 1 ))
+	done
+
+	cursize=$( ls -l "${curfile}" | awk '{print $5}' )
+	curblks=$(( (${cursize} + 511) / 512 ))
+	curcyls=$(( (${curblks} + (${CYLSIZE} - 1)) / ${CYLSIZE} ))
+	printf "${FORMAT}" "Image ${curpart}:" ${curoff} ${curcyls} "${curfile}"
+
+	eval	PART${curpart}SIZE=${cursize} \
+		PART${curpart}BLKS=${curblks} \
+		PART${curpart}CYLS=${curcyls} \
+		PART${curpart}OFF=${curoff} \
+		PART${curpart}FILE="${curfile}"
+
+	if [ $curoff -eq $ENDCYL ]; then		# append ${curfile}
+		echo "    (appending ${curfile} to ${ISOIMAGE})"
+		dd if="${curfile}" of="${ISOIMAGE}" bs=${CYLSIZE}b \
+		    seek=${ENDCYL} conv=notrunc,sync 2>/dev/null
+		ENDCYL=$(( $ENDCYL + $curcyls ))
+	fi
+
+done
+
+printf "${FORMAT}" "Final:" 0 ${ENDCYL} "${ISOIMAGE}"
+
+${SUNLABEL} -nq "${ISOIMAGE}" << _partinfo_
+V nsect ${CYLSIZE}
+V nhead 1
+V rpm 300
+V pcyl ${ENDCYL}
+V ncyl ${ENDCYL}
+a 0 $(( ${ISOCYLS} * ${CYLSIZE} ))
+b ${PART1OFF:-0} $(( ${PART1CYLS:-0} * ${CYLSIZE} ))
+c ${PART2OFF:-0} $(( ${PART2CYLS:-0} * ${CYLSIZE} ))
+d ${PART3OFF:-0} $(( ${PART3CYLS:-0} * ${CYLSIZE} ))
+e ${PART4OFF:-0} $(( ${PART4CYLS:-0} * ${CYLSIZE} ))
+f ${PART5OFF:-0} $(( ${PART5CYLS:-0} * ${CYLSIZE} ))
+W
+_partinfo_
--- a/distrib/sets/Makefile
+++ b/distrib/sets/Makefile
@ -0,0 +1,315 @@
+#	$NetBSD: Makefile,v 1.84 2011/08/09 15:02:30 jmcneill Exp $
+
+# Experimental RCS METALOG versioning
+# (Needs host's rcs(1) commands)
+#
+# TODO:
+# - In 'build.sh distribution', print diff to previous
+#RCSMETALOG=1
+
+# The `all' target must appear before bsd.own.mk is pulled in.
+all:
+	@echo "Please understand what you are doing, first."
+	@false
+
+.include <bsd.own.mk>
+.include "${NETBSDSRCDIR}/distrib/common/Makefile.distrib"
+
+.if ${USE_PIGZGZIP} != "no"
+COMPRESS_PROGRAM=${TOOL_PIGZ:Q}
+.else
+COMPRESS_PROGRAM=gzip
+.endif
+
+SETSENV=	DESTDIR=${DESTDIR:Q} \
+		MACHINE=${MACHINE:Q} \
+		MACHINE_ARCH=${MACHINE_ARCH:Q} \
+		AWK=${TOOL_AWK:Q} \
+		CKSUM=${TOOL_CKSUM:Q} \
+		DB=${TOOL_DB:Q} \
+		HOST_SH=${HOST_SH:Q} \
+		MAKE=${MAKE:Q} \
+		MKTEMP=${TOOL_MKTEMP:Q} \
+		MTREE=${TOOL_MTREE:Q} \
+		PAX=${TOOL_PAX:Q} \
+		COMPRESS_PROGRAM=${COMPRESS_PROGRAM:Q} \
+		PKG_CREATE=${TOOL_PKG_CREATE:Q} \
+		SED=${TOOL_SED:Q} \
+		TSORT=${TSORT:Q}
+SETSCMD=	cd ${.CURDIR} && \
+		${SETSENV} \
+		${HOST_SH}
+
+MAKETARS_FLAGS=
+.if ${MKX11} != "no"
+MAKESRCTARS_X11_FLAGS=	-x ${X11SRCDIR}
+.endif
+.if ${MKEXTSRC} != "no"
+MAKESRCTARS_EXTSRC_FLAGS=	-y ${EXTSRCSRCDIR}
+.endif
+.if ${MKX11} != "no"
+MAKEFLIST_X11_FLAGS=	,x
+.endif
+.if ${MKEXTSRC} != "no"
+MAKEFLIST_EXTSRC_FLAGS=	,ext
+.endif
+MAKEFLIST_FLAGS=	-L base${MAKEFLIST_X11_FLAGS}${MAKEFLIST_EXTSRC_FLAGS}
+MAKESRCTARS_FLAGS= 	-N ${NETBSDSRCDIR}/etc
+
+.if ${MAKEVERBOSE} < 2
+MAKETARS_FLAGS+=	-q
+MAKESRCTARS_FLAGS+= 	-q
+.endif
+
+.if !defined(MAKETARSETS)
+MAKETARSETS!= ${SETSCMD} ./makeflist -l ${MAKEFLIST_FLAGS}
+.endif
+
+print_have_gcc: .PHONY
+	@echo ${HAVE_GCC}
+
+print_machine: .PHONY
+	@echo ${MACHINE}
+
+print_machine_arch: .PHONY
+	@echo ${MACHINE_ARCH}
+
+print_machine_cpu: .PHONY
+	@echo ${MACHINE_CPU}
+
+print_object_fmt: .PHONY
+	@echo ${OBJECT_FMT}
+
+print_toolchain_missing: .PHONY
+	@echo "${TOOLCHAIN_MISSING}"
+
+print_mkvars \
+print_set_lists_base print_set_lists_x print_set_lists_ext \
+list_set_lists_base list_set_lists_x list_set_lists_ext \
+list_set_files_base list_set_files_x list_set_files_ext \
+		: .PHONY
+	@${SETSENV}; rundir="${.CURDIR}"; . ./sets.subr; ${.TARGET}
+
+#
+# METALOG MANIPULATION TARGETS
+#
+# METALOG is the name of a metadata log file, and is set in <bsd.own.mk>
+# if MKUNPRIVED is not "no".
+#
+# METALOG.unpriv is a command line option passed to various scripts;
+# it is either blank or "-M ${METALOG}.sanitised", depending on the
+# MKUNPRIVED flag.
+#
+# The sanitise_METALOG target creates METALOG.sanitised from METALOG,
+# without modifying METALOG itself.  METALOG.sanitised is sorted, and
+# has duplicates merged.  This is used near the end of a build, after
+# build products have been installed in DESTDIR and corresponding lines
+# have been added to METALOG, but before METALOG.sanitised is used in
+# the creation of sets in RELEASEDIR.
+#
+# The clean_METALOG either deletes METALOG or replaces METALOG with
+# a sanitised version of itself, depending on the MKUPDATE flag, and
+# deletes old METALOG.* files.  This is intended to be used at the start
+# of a build, to ensure that repeated MKUPDATE builds do not cause
+# unbounded growth of METALOG.
+#
+
+.if ${MKUNPRIVED} == "no"
+METALOG.unpriv=
+sanitise_METALOG: .PHONY
+	@true
+clean_METALOG: .PHONY
+	@true
+.else	# MKUNPRIVED
+METALOG.unpriv= -M ${METALOG}.sanitised
+sanitise_METALOG: .PHONY ${METALOG}.sanitised
+${METALOG}.sanitised: ${METALOG}
+	sort ${METALOG} | \
+	    ${TOOL_MTREE} -CSM -k all -N ${NETBSDSRCDIR}/etc \
+	    >${METALOG}.new
+	mv ${METALOG}.new ${METALOG}.sanitised
+.if defined(RCSMETALOG)
+	. ./metalog.subr; \
+	xrcs_descr="build distribution METALOG"; \
+	xrcs_msg="$$(date)"; \
+	xrcs_cur=${METALOG}.sanitised; \
+	xrcs update
+.endif
+.if ${MKUPDATE} == "no" || !exists(${METALOG})
+clean_METALOG: .PHONY
+	rm -f ${METALOG} ${METALOG}.*
+.else	# MKUPDATE
+clean_METALOG: .PHONY ${METALOG}.sanitised
+	mv ${METALOG}.sanitised ${METALOG}
+.if defined(RCSMETALOG)
+	[ -f ${METALOG}.sanitised,v ] && mv ${METALOG}.sanitised,v ${METALOG},v
+.endif
+	rm -f ${METALOG}.*
+.if defined(RCSMETALOG)
+	[ -f ${METALOG},v ] && mv ${METALOG},v ${METALOG}.sanitised,v
+.endif
+.endif	# MKUPDATE
+.endif	# MKUNPRIVED
+
+#
+# FILE LIST TARGETS
+#
+
+# This target has debugging value only, really.
+makeflist: .PHONY .PRECIOUS check_DESTDIR
+	${SETSCMD} ./makeflist ${MAKEFLIST_FLAGS}
+
+checkflist: .PRECIOUS .PHONY check_DESTDIR sanitise_METALOG
+	${SETSCMD} ${.CURDIR}/checkflist \
+	    ${MAKEFLIST_FLAGS} ${CHECKFLIST_FLAGS} ${METALOG.unpriv}
+
+checkflist-x11: .PHONY check_DESTDIR
+	${SETSCMD} ./checkflist -x ${CHECKFLIST_FLAGS}
+
+checkflist-extsrc: .PHONY check_DESTDIR
+	${SETSCMD} ./checkflist -y ${CHECKFLIST_FLAGS}
+
+.if defined(DESTDIR) && ${DESTDIR} != ""
+checkflist_if_DESTDIR: checkflist
+.else
+checkflist_if_DESTDIR:
+.endif
+
+#
+# SET BUILDING TARGETS
+#
+
+TARDIR=		${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/sets
+SOURCETARDIR=	${RELEASEDIR}/source/sets
+
+# If MAKETARS_SERIAL is set to "YES" or "yes", then the tar sets will be
+# made in series, even if make's "-j" flag requests multiple parallel
+# jobs.  This is useful on systems that exhibit poor performance when
+# running multiple parallel disk-intensive operations.  The default is
+# MAKETARS_SERIAL=NO, which will obey the "-j" flag passed to the make
+# command.
+#
+MAKETARS_SERIAL?= NO
+.if empty(MAKETARS_SERIAL:M[Yy][Ee][Ss])
+_MAKETARS_WAIT= # empty
+.else
+_MAKETARS_WAIT= .WAIT
+.endif
+
+maketars: .PRECIOUS .PHONY check_DESTDIR check_RELEASEDIR \
+		sanitise_METALOG checkflist_if_DESTDIR .WAIT \
+		maketarsetup .WAIT \
+		${MAKETARSETS:@.TARS.@${_MAKETARS_WAIT} do-${.TARS.}@}
+	@true
+
+maketarsetup: .EXEC
+.if defined(DESTDIR) && ${DESTDIR} != ""
+	${_MKMSG} "execute  checkflist"
+	${MAKE} checkflist
+.endif
+	mkdir -p ${TARDIR}
+	for i in MD5 SHA512; do \
+		rm -f ${TARDIR}/$$i ${TARDIR}/$$i.tmp; \
+	done
+
+makesetfiles: .PHONY sanitise_METALOG
+	${_MKMSG_CREATE} "set lists"
+	${SETSCMD} ./maketars -S -d ${DESTDIR:S,^$,/,} ${MAKETARS_FLAGS} \
+	    ${METALOG.unpriv} \
+	    -N ${NETBSDSRCDIR}/etc ${MAKEFLIST_FLAGS} -t ${TARDIR}
+
+.for tar in ${MAKETARSETS}
+do-${tar}: .PHONY sanitise_METALOG
+	${_MKMSG_CREATE} "${tar}.tgz"
+	${SETSCMD} ./maketars -d ${DESTDIR:S,^$,/,} ${MAKETARS_FLAGS} \
+	    ${METALOG.unpriv} \
+	    -N ${NETBSDSRCDIR}/etc -t ${TARDIR} ${tar} \
+	|| { rm -f ${TARDIR}/${tar}.tgz; false; }
+.endfor
+
+
+makesrctars: .PRECIOUS .PHONY check_RELEASEDIR
+	${_MKMSG_CREATE} "source tar files"
+	mkdir -p ${SOURCETARDIR}
+	${SETSCMD} ./makesrctars ${MAKESRCTARS_FLAGS} \
+	    ${MAKESRCTARS_X11_FLAGS} ${MAKESRCTARS_EXTSRC_FLAGS} \
+	    ${NETBSDSRCDIR} ${SOURCETARDIR}
+
+
+makesums: .PRECIOUS .PHONY check_RELEASEDIR .WAIT \
+		${MAKETARSETS:@.TARS.@do-sum-${.TARS.}@}
+	for i in MD5 SHA512; do \
+		mv ${TARDIR}/$$i.tmp ${TARDIR}/$$i; \
+	done
+
+.for tar in ${MAKETARSETS}
+do-sum-${tar}: .PHONY do-${tar}
+	${_MKMSG_CREATE} "${tar} checksums"
+	${MAKESUMS} -t ${TARDIR} ${tar}.tgz
+	for i in MD5 SHA512; do \
+		${TOOL_CAT} ${TARDIR}/$$i >> ${TARDIR}/$$i.tmp; \
+	done
+.endfor
+.ORDER: ${MAKETARSETS:@.TARS.@do-sum-${.TARS.}@}
+
+
+installsets: .PHONY check_DESTDIR sanitise_METALOG
+.if !defined(INSTALLDIR)
+	@echo "setenv INSTALLDIR before doing that!"
+	@false
+.endif
+	${SETSCMD} ./maketars -d ${DESTDIR:S,^$,/,} ${MAKETARS_FLAGS} \
+	    ${METALOG.unpriv} -N ${NETBSDSRCDIR}/etc \
+	    ${MAKEFLIST_FLAGS} -i ${INSTALLDIR} ${INSTALLSETS}
+
+# Should we ignore errors like extra or missing files in the flists?
+SLOPPY_FLIST?= NO
+.if !empty(SLOPPY_FLIST:M[Yy][Ee][Ss])
+CHECKFLIST_FLAGS+=	-e -m
+REGPKG.sloppy=		-m
+.endif
+
+.if ${MAKEVERBOSE} == 0
+REGPKG.verbose?= -q
+.elif ${MAKEVERBOSE} == 1
+REGPKG.verbose?=
+.else	# MAKEVERBOSE >= 2
+REGPKG.verbose?= -v
+.endif
+REGPKG.force?=		# -f, or empty
+REGPKG.cache?= -c	# -c, or empty
+REGPKG.update:= ${MKUPDATE:tl:Nno:C/..*/-u/}
+SYSPKGSETS?= all
+makesyspkgs: .PHONY check_DESTDIR check_RELEASEDIR \
+		sanitise_METALOG checkflist_if_DESTDIR
+	mkdir -p ${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/syspkgs
+	${SETSCMD} ${.CURDIR}/regpkgset \
+	    ${REGPKG.verbose} ${REGPKG.force} ${REGPKG.sloppy} \
+	    ${REGPKG.cache} ${REGPKG.update} \
+	    -d ${DESTDIR:S,^$,/,} ${METALOG.unpriv} \
+	    -N ${NETBSDSRCDIR}/etc \
+	    -t ${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/syspkgs ${SYSPKGSETS}
+
+makesyspkgsums: .PHONY check_RELEASEDIR
+	${MAKESUMS} -t ${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/syspkgs
+
+# Update the "deps" file.
+# XXX: Why is "deps" checked in to the source tree, instead of
+# just being created as necessary?
+makedeps: .PHONY
+	${SETSCMD} ./syspkgdeps all >${.CURDIR}/deps
+
+#
+# MAIN ENTRY POINTS
+#
+
+syspkgs: .PHONY makesyspkgs .WAIT makesyspkgsums
+	@true
+
+sets: .PHONY maketars .WAIT makesums
+	@true
+
+sourcesets: .PHONY makesrctars
+	@true
+
+.include <bsd.sys.mk>
--- a/distrib/sets/README
+++ b/distrib/sets/README
@ -0,0 +1,79 @@
+# $NetBSD: README,v 1.11 2009/09/12 09:24:32 jnemeth Exp $
+
+the scripts should be run from the directory where they reside.
+
+makeflist:	output the list of files that should be in a
+		distribution, according to the contents of the
+		'lists' directory.
+
+checkflist:	check the file list (as internally generated
+		by makeflist) against the tree living in $DESTDIR.
+		(that tree should be made with 'make distribution'.)
+
+maketars:	make tarballs of the various sets in the distribution,
+		based on the contents of the lists, the tree in
+		$DESTDIR, and put the tarballs in $RELEASEDIR.
+		Note that this script _doesn't_ create the 'secr'
+		distribution, because (for now) it requires
+		manual intervention to get the binaries right...
+		(i'll add another script to create that dist, later.)
+
+what's in 'lists':
+
+lists describing file sets.  There are two sets of lists per file
+set: machine dependent and machine-independent files. (there's
+also another file in the 'man' dir, which is used by the 'man'
+and 'misc' sets, but that's explained later.)
+
+There is one machine-independent file, named "mi".  There are
+N machine-dependent files (one per architecture), named "md.${ARCH}".
+
+the sets are as follows:
+
+	base:	the base binary set.  excludes everything described
+		below.
+
+	comp:	compiler tools.  All of the tools relating to C, C++,
+		and FORTRAN (yes, there are two!) that are in the
+		tree.  This includes includes, the linker, tool chain,
+		and the .a versions of the libraries.  (obviously,
+		base includes ldd, ld.so, and the shared versions.
+		base also includes 'cpp', because that's used by X11.)
+		includes the man pages for all the binaries contained
+		within.  Also, includes all library and system call
+		manual pages.
+
+	etc:	/etc, and associated files (/var/cron/tabs, /root,
+		etc.).  things that shouldn't be blindly reinstalled
+		on an upgrade.
+
+	games:	the games and their man pages.
+
+	man:	all of the man pages for the system, except those
+		listed elsewhere (e.g. in comp, games, misc, text).
+		Includes machine-dependent man pages for this CPU.
+
+	misc:	share/dict, share/doc, and the machine-dependent
+		man pages for other CPUs which happen to always
+		be installed.
+
+	modules:	stand/${MACHINE}/${OSRELEASE}/modules kernel modules
+
+	tests:	unit, regression, integration and stress tests for the
+		whole system.
+
+	text:	text processing tools.  groff and all of its friends.
+		includes man pages for all bins contained within.
+
+
+as noted, in addition to the "standard" files in each dir, there's
+a file called 'md_share' in lists/man.  it's the list of man pages
+that are installed from /usr/src/share, which are machine-dependent.
+(note that ones that are installed from elsewhere, and thus are
+installed on only one architecture, are listed in the md.${ARCH}
+file.)  basically, it's grepped through, to see which of the
+machine-dependent man pages that are always installed should go
+in the 'man' set, and which should go into the 'misc' set.
+
+Each set must contain "./etc/mtree/set.<set name>" within the mi
+list.  Failure to add this will break unprivileged builds.
--- a/distrib/sets/TODO
+++ b/distrib/sets/TODO
@ -0,0 +1,19 @@
+TODO list for system packages
+=============================
+
+ commit Alan Barrett's mods from PR 22514 for system package building
+  from build.sh
+ decide whether to keep a separate system package database of
+  metadata, and, if so, where to keep it
+ if using separate database, add a flag to support this to pkg_*
+ add syspkg support to sysinst
+	+ add pkg_install utilities (and necessary sub-utilities) to
+	  the crunched install tools
+	+ fix sysinst to use them
+ need a tool to create meta-packages
+	+ base-bind meta-pkg created from base-bind-root,
+	  base-bind-bin and base-bind-example
+	+ base meta-pkg created from base-* meta-pkgs
+	+ bundle packages into tar files (`pkgsets'per src/distrib/syspkg/notes)
+	+ meta-pkg content entirely derivable from pkg names (base-*, base-bind-*)
+ add system packages to the release ISOs
--- a/distrib/sets/attrs
+++ b/distrib/sets/attrs
@ -0,0 +1,11 @@
+minix-sys	preserve
+base-sys-root	preserve
+base-sys-share	preserve
+base-sys-shlib	preserve
+base-sys-usr	preserve
+base-sysutil-bin	preserve
+base-sysutil-root	preserve
+base-sysutil-share	preserve
+base-util-bin	preserve
+base-util-root	preserve
+base-util-share	preserve
--- a/distrib/sets/checkflist
+++ b/distrib/sets/checkflist
@ -0,0 +1,296 @@
+#! /bin/sh --
+#
+#	$NetBSD: checkflist,v 1.42 2009/12/11 11:48:41 uebayasi Exp $
+#
+# Verify output of makeflist against contents of ${DESTDIR} and ${metalog}.
+
+if [ -z "${DESTDIR}" ]; then
+	echo "DESTDIR must be set"
+	exit 1
+fi
+
+prog="${0##*/}"
+rundir="$(dirname "$0")" # ${0%/*} isn't good enough when there's no "/"
+. "${rundir}/sets.subr"
+
+#
+# * ${SETS_DLIST}: files present in DESTDIR.
+# * ${SETS_FLIST}: files mentioned in flist;
+# * ${SETS_MLIST}: files mentioned in metalog;
+#
+SETS_DLIST="${DESTDIR}/SETS.dlist"
+SETS_FLIST="${DESTDIR}/SETS.flist"
+SETS_MLIST="${DESTDIR}/SETS.mlist"
+
+#
+# * ${SETS_METALOG_EXTRA}: Files in METALOG but missing from DESTDIR."
+# * ${SETS_METALOG_MISSING}: Files in DESTDIR but missing from METALOG."
+# * ${SETS_DESTDIR_EXTRA}: Files in DESTDIR but missing from setlist."
+# * ${SETS_DESTDIR_MISSING}: Files in setlist but missing from DESTDIR."
+#
+SETS_METALOG_EXTRA="${DESTDIR}/SETS.metalog.extra"
+SETS_METALOG_MISSING="${DESTDIR}/SETS.metalog.missing"
+SETS_DESTDIR_EXTRA="${DESTDIR}/SETS.destdir.extra"
+SETS_DESTDIR_MISSING="${DESTDIR}/SETS.destdir.missing"
+
+es=0
+cleanup()
+{
+	if [ ${es} -gt 255 ]; then
+		es=255
+	fi
+	exit ${es}
+}
+trap cleanup 0 2 3 13		# EXIT INT QUIT PIPE
+
+origin=.
+xargs=""
+dargs=""
+metalog=
+allowextra=false
+allowmissing=false
+
+# handle args
+while getopts xybL:M:em ch; do
+	case ${ch} in
+	x)
+		xargs="-x"
+		origin="./etc/X11 ./etc/fonts ./usr/X11R6"
+		;;
+	y)
+		xargs="-y"
+		origin="./etc/ext ./usr/ext"
+		;;
+	# backward compat
+	b)
+		xargs="-b"
+		;;
+	L)
+		xargs="-L ${OPTARG}"
+		;;
+	M)
+		metalog="${OPTARG}"
+		;;
+	e)
+		allowextra=true
+		;;
+	m)
+		allowmissing=true
+		;;
+	*)
+		cat 1>&2 <<USAGE
+Usage: ${prog} [-x|-y|-b|-L lists] [-M metalog] [-e] [-m]
+	-x		check only x11 lists
+	-y		check only extsrc lists
+	-b		check netbsd + x11 lists
+	-L base,x,ext	check specified lists
+	-M metalog	metalog file
+	-e		extra files are not considered an error
+	-m		missing files are not considered an error
+USAGE
+		exit 1
+		;;
+	esac
+done
+shift $((${OPTIND} - 1))
+
+#
+# Exceptions to flist checking (all begin with "./"):
+#
+# * ignore var/db/syspkg and its contents
+# * ignore METALOG and METALOG.*
+# * ignore etc/mtree/set.*
+#
+ignore_exceptions()
+{
+IGNORE_REGEXP_SYSPKG="^\./var/db/syspkg(\$|/)"
+IGNORE_REGEXP_METALOG="^\./METALOG(\..*)?\$"
+IGNORE_REGEXP_SETS="^\./SETS\..*\$"
+IGNORE_REGEXP_MTREE="^\./etc/mtree/set\.[a-z]*\$"
+
+	${EGREP} -v \
+		-e "${IGNORE_REGEXP_SYSPKG}" \
+		-e "${IGNORE_REGEXP_METALOG}" \
+		-e "${IGNORE_REGEXP_SETS}" \
+		-e "${IGNORE_REGEXP_MTREE}"
+}
+
+#
+# Here would be a good place to add custom exceptions to flist checking.
+#
+
+#
+# Make three lists:
+#
+# All three lists are filtered against ${IGNORE_REGEXP}.
+#
+
+generate_dlist()
+{
+( cd "${DESTDIR}" && ${FIND} ${origin} \
+	\( -type d -o -type f -o -type l \) -print ) \
+	| ${SORT} -u | ignore_exceptions >"${SETS_DLIST}"
+}
+
+generate_flist()
+{
+${HOST_SH} "${rundir}/makeflist" ${xargs} ${dargs} \
+	| ${SORT} -u | ignore_exceptions >"${SETS_FLIST}"
+}
+
+generate_mlist()
+{
+if [ -n "${metalog}" ]; then
+	${AWK} '{print $1}' <"${metalog}" \
+	| ${SORT} -u | ignore_exceptions >"${SETS_MLIST}"
+fi
+}
+
+generate_mlist_missing()
+{
+	${COMM} -23 "${SETS_DLIST}" "${SETS_MLIST}" > "${SETS_METALOG_MISSING}"
+}
+
+generate_mlist_extra()
+{
+	${COMM} -13 "${SETS_DLIST}" "${SETS_MLIST}" > "${SETS_METALOG_EXTRA}"
+}
+
+generate_dlist_missing()
+{
+	${COMM} -23 "${SETS_FLIST}" "${SETS_DLIST}" > "${SETS_DESTDIR_MISSING}"
+}
+
+generate_dlist_extra()
+{
+	${COMM} -13 "${SETS_FLIST}" "${SETS_DLIST}" > "${SETS_DESTDIR_EXTRA}"
+}
+
+exist_case_insensitive()
+{
+	while read f; do
+		[ -f "${DESTDIR}/${f}" ] || \
+		[ -d "${DESTDIR}/${f}" ] || \
+		[ -L "${DESTDIR}/${f}" ] || \
+		echo "$f"
+	done
+}
+
+#
+# compare DESTDIR with METALOG, and report on differences.
+#
+compare_metalog()
+{
+    # Handle case insensitive filesystems
+    mv -f "${SETS_METALOG_EXTRA}" "${SETS_METALOG_EXTRA}.all"
+    exist_case_insensitive < "${SETS_METALOG_EXTRA}.all" > "${SETS_METALOG_EXTRA}"
+    rm -f "${SETS_METALOG_EXTRA}.all"
+
+    check_metalog_extra
+    check_metalog_missing
+}
+
+check_metalog_extra()
+{
+    if [ -s "${SETS_METALOG_EXTRA}" ]; then
+	count="$(${AWK} 'END {print NR}' "${SETS_METALOG_EXTRA}")"
+	echo ""
+	echo "=======  ${count} extra files in METALOG  ========="
+	echo "Files in METALOG but missing from DESTDIR."
+	echo "File was deleted after installation ?"
+	echo "------------------------------------------"
+	cat "${SETS_METALOG_EXTRA}"
+	echo "=========  end of ${count} extra files  ==========="
+	echo ""
+	es=1 # this is fatal even if ${allowextra} is true
+    fi
+}
+
+check_metalog_missing()
+{
+    if [ -s "${SETS_METALOG_MISSING}" ]; then
+	count="$(${AWK} 'END {print NR}' "${SETS_METALOG_MISSING}")"
+	echo ""
+	echo "======  ${count} missing files in METALOG  ========"
+	echo "Files in DESTDIR but missing from METALOG."
+	echo "File installed but not registered in METALOG ?"
+	echo "------------------------------------------"
+	cat "${SETS_METALOG_MISSING}"
+	echo "========  end of ${count} missing files  =========="
+	echo ""
+	es=1 # this is fatal even if ${allowmissing} is true
+    fi
+}
+
+#
+# compare flist with DESTDIR, and report on differences.
+#
+compare_destdir()
+{
+# Handle case insensitive filesystems
+mv -f "${SETS_DESTDIR_MISSING}" "${SETS_DESTDIR_MISSING}.all"
+exist_case_insensitive < "${SETS_DESTDIR_MISSING}.all" > "${SETS_DESTDIR_MISSING}"
+rm -f "${SETS_DESTDIR_MISSING}.all"
+
+check_destdir_extra
+check_destdir_missing
+}
+
+check_destdir_extra()
+{
+if [ -s "${SETS_DESTDIR_EXTRA}" ]; then
+	count="$(${AWK} 'END {print NR}' "${SETS_DESTDIR_EXTRA}")"
+	echo ""
+	echo "=======  ${count} extra files in DESTDIR  ========="
+	echo "Files in DESTDIR but missing from flist."
+	echo "File is obsolete or flist is out of date ?"
+	if ${allowextra}; then
+		echo "This is non-fatal, due to '-e' option."
+	else
+		es=1
+	fi
+	echo "------------------------------------------"
+	cat "${SETS_DESTDIR_EXTRA}"
+	echo "=========  end of ${count} extra files  ==========="
+	echo ""
+fi
+}
+
+check_destdir_missing()
+{
+if [ -s "${SETS_DESTDIR_MISSING}" ]; then
+	count="$(${AWK} 'END {print NR}' "${SETS_DESTDIR_MISSING}")"
+	echo ""
+	echo "======  ${count} missing files in DESTDIR  ========"
+	echo "Files in flist but missing from DESTDIR."
+	echo "File wasn't installed ?"
+	if ${allowmissing}; then
+		echo "This is non-fatal, due to '-m' option."
+	else
+		es=1
+	fi
+	echo "------------------------------------------"
+	cat "${SETS_DESTDIR_MISSING}"
+	echo "========  end of ${count} missing files  =========="
+	echo ""
+fi
+}
+
+generate_dlist
+generate_flist
+generate_mlist
+
+generate_mlist_missing
+generate_mlist_extra
+
+generate_dlist_missing
+generate_dlist_extra
+
+if false && [ -n "${metalog}" ]; then
+	# XXX: Temporarily disabled due to problems with obsolete files in metalog
+	compare_metalog
+else
+	compare_destdir
+fi
+
+exit 0		# cleanup will exit with ${es}
--- a/distrib/sets/comments
+++ b/distrib/sets/comments
@ -0,0 +1,470 @@
+minix-sys Minix Complete system
+base-adosfs-root Root file system support for Amiga DOS file system support
+base-amd-bin auto-mounter daemon
+base-amd-examples example configuration files for the auto-mounter daemon and utilities
+base-amd-shlib auto-mounter daemon shared library
+base-audio-bin utilities for playing and recording audio
+base-bind-bin the BIND DNS server
+base-bind-examples example configuration files for BIND
+base-bind-root root file system directories required by BIND
+base-bootserver-bin software for booting diskless systems
+base-c-bin utilities for the C programming language
+base-c-usr /usr file system directories required by C programming language utilities
+base-calendar-bin calendar(1) displays lines from the calendar database matching certain dates
+base-calendar-share database of important dates for calendar(1)
+base-cron-bin the cron daemon and related utilities
+base-cron-root root file system directories required by the cron daemon
+base-crypto-bin cryptographic utilities
+base-crypto-examples example configuration files for cryptographic utilities
+base-crypto-root root file system directories required by cryptographic utilities
+base-crypto-shlib shared library providing cryptographic routines
+base-cxx-usr /usr file system directories required by C++ programming language utilities
+base-debug-bin debugging utilities
+base-dhclient-root root file system support for DHCP client software
+base-dhcpd-bin DHCP server
+base-dhcpd-examples example configuration files for DHCP server
+base-efs-root root file system support for efs file system
+base-ext2fs-root root file system support for ext2fs file system
+base-filecorefs-root root file system support for the Acorn FILECORE file system
+base-fstab-examples various example file system tables
+base-games-root root file system support for games
+base-games-share shared data files for games
+base-games-usr directories for the games subsystem
+base-gnats-bin the GNATS bug reporting utility
+base-gnats-share shared data files for the GNATS bug reporting utility
+base-groff-font fonts for the groff family of text formatters
+base-groff-share shared data files for the groff family of text formatters
+base-hesiod-bin utilities for the HESIOD network information system
+base-htmldoc-share HTML documentation
+base-i18n-root directories for internationalisation support
+base-i18n-shlib shared library modules for internationalisation support
+base-ipf-bin IPfilter utilities
+base-ipf-root directories for IPfilter
+base-isdn-bin utilities and daemons for ISDN network connectivity
+base-isdn-examples directories for the ISDN example files
+base-kernel-modules loadable kernel modules
+base-krb5-bin commands and utilities for the Kerberos V network authentication system
+base-krb5-examples example configuration files for the Kerberos V network authentication system
+base-krb5-root root file system support for the Kerberos V network authentication system
+base-krb5-shlib root file system support for the Kerberos V network authentication system
+base-libsaslc-examples example configuration files for the SASL C library
+base-locale-Pig igPey atinLey ocaleley upportsey (Pig-Latin locale support)
+base-locale-bin utilities for working with locales
+base-locale-ca Catalan language locale support
+base-locale-cs Czech language locale support
+base-locale-da Danish language locale support
+base-locale-de German language locale support
+base-locale-el Greek language locale support
+base-locale-en English language locale support
+base-locale-eo Esperanto language locale support
+base-locale-es Spanish language locale support
+base-locale-et Estonian language locale support
+base-locale-fi Finnish language locale support
+base-locale-fr French language locale support
+base-locale-gl	Galician language locale support
+base-locale-he Hebrew language locale support
+base-locale-hr Croatian language locale support
+base-locale-hu Hungarian language locale support
+base-locale-id	Indonesian language locale support
+base-locale-is Icelandic language locale support
+base-locale-it Italian language locale support
+base-locale-ja Japanese language locale support
+base-locale-ko Korean language locale support
+base-locale-lt Lithuanian language locale support
+base-locale-nl Dutch language locale support
+base-locale-no Norwegian language locale support
+base-locale-pl Polish language locale support
+base-locale-pt Portuguese language locale support
+base-locale-ru Russian language locale support
+base-locale-share /usr/share file system support for all locales
+base-locale-sk Slovak language locale support
+base-locale-sl Slovenian language locale support
+base-locale-sv Swedish language locale support
+base-locale-tr	Turkish language locale support
+base-locale-uk Ukrainian language locale support
+base-locale-zh Chinese language locale support
+base-lpr-bin utilities for printing support
+base-lpr-root root file system support for printing utilities
+base-lpr-usr /usr file system support for printing
+base-magic-share shared files for the file(1) utility
+base-mail-bin mail utilities
+base-mail-root root file system support for mail utilities
+base-mailwrapper-bin the mailwrapper(8) program for multiple mailer support
+base-man-bin utilities for reading online manual pages
+base-man-share shared data files for the online manual pages
+base-miscfs-examples example configuration files for miscellaneous file systems
+base-miscfs-root root file system support for miscellaneous file systems
+base-net-shlib shared libraries for network programming
+base-netutil-bin networking utilities
+base-netutil-examples example configuration files for networking programs
+base-netutil-root root file system support for networking utilities
+base-nfsclient-bin network file system client utilities
+base-nfsclient-root root file system support for network file system client utilities
+base-nfsserver-bin network file system server program
+base-nis-bin progams and utilities for the NIS network information system
+base-nis-root root file system support for the NIS network information system
+base-ntfs-root root file system support for the Windows NT file system
+base-ntp-bin utilities for network time protocol support
+base-ntp-root	basic directories for network time protocol support
+base-objc-usr /usr file system support for the Objective C programming language
+base-pf-bin utilities for the PF packet filter
+base-pf-root directories for the PF packet filter
+base-pkgutil-bin package system utilities
+base-postfix-bin the Postfix mailer
+base-postfix-examples example configuration files for the Postfix mailer
+base-postfix-root root file system support for the Postfix mailer
+base-postfix-usr /usr file system support for the Postfix mailer
+base-ppp-bin utilities for the PPP point-to-point remote access protocol
+base-psd-share directory structure for the Programmer's Supplementary Documentation
+base-rcs-bin utilities for the RCS Revision Control System
+base-reference-share directory structure for miscellaneous reference documents
+base-rescue-root statically-linked binaries which can be used in extremis
+base-router-bin network routing utilities
+base-router-examples base directories for network routing utilities
+base-router-root root file system support for network routing utilities
+base-secsh-bin secure shell SSH client and server
+base-sendmail-bin the sendmail(8) mailer
+base-sendmail-root root file system support for the sendmail(8) mailer
+base-sendmail-share shared data files for the sendmail(8) mailer
+base-sendmail-usr /usr file system support for the sendmail(8) mailer
+base-slip-bin the SLIP serial line internet protocol
+base-slip-root root file system support for the SLIP remote access protocol
+base-smbfs-root root file system support for the smbfs client SMB filesystem support
+base-smm-share directory structure for the System Manager's Manual
+base-sup-bin utilities for the SUP software update protocol
+base-sup-examples example configuration files for the SUP software update protocol
+base-sys-devlinks device node symbolic links
+base-sys-examples example configuration files for kernel functionality
+base-sys-root required root file system structure
+base-sys-share required /usr/share file system structure
+base-sys-shlib shared libraries for basic system functionality
+base-sys-usr required /usr file system structure
+base-sysutil-bin system utilities
+base-sysutil-examples example configuration files for miscellaneous system utilities
+base-sysutil-root root file system support for system utilities
+base-sysutil-share shared data files for system utilities
+base-sysutil_locale-share shared locale support for system utilities
+base-termcap-share shared files for terminal capability database
+base-texinfo-bin the GNU texinfo software
+base-texinfo-share shared data files for the GNU texinfo software
+base-texinfo_locale-cs Czech language support for the GNU texinfo software
+base-texinfo_locale-da Danish language support for the GNU texinfo software
+base-texinfo_locale-de German language support for the GNU texinfo software
+base-texinfo_locale-eo	Esperanto language support for the GNU texinfo software
+base-texinfo_locale-fr French language support for the GNU texinfo software
+base-texinfo_locale-he Hebrew language support for the GNU texinfo software
+base-texinfo_locale-hr Croatian language support for the GNU texinfo software
+base-texinfo_locale-ja Japanese language support for the GNU texinfo software
+base-texinfo_locale-nl Dutch language support for the GNU texinfo software
+base-texinfo_locale-no Norwegian language support for the GNU texinfo software
+base-texinfo_locale-ru Russian language support for the GNU texinfo software
+base-texinfo_locale-sv Swedish language support for the GNU texinfo software
+base-texinfo_locale-tr Turkish language support for the GNU texinfo software
+base-texinfo_locale-zh Chinese language support for the GNU texinfo software
+base-timed-bin utilities for the timed(8) network time daemon
+base-tn3270-bin utilities for connecting to IBM VM/CMS systems
+base-usd-share directory structure for the User's Supplementary Documentation
+base-util-bin standard utilities for use by users
+base-util-root root file system support for standard user utilities
+base-util-share shared data files for standard user utilities
+base-util_locale-cs	Czech language support for standard utilities
+base-util_locale-de German language support for standard utilities
+base-util_locale-el Greek language support for standard utilities
+base-util_locale-eo	Esperanto language support for standard utilities
+base-util_locale-es Spanish language support for standard utilities
+base-util_locale-et Estonian language support for standard utilities
+base-util_locale-fr French language support for standard utilities
+base-util_locale-gl	Galician language support for standard utilities
+base-util_locale-hr	Croatian language support for standard utilities
+base-util_locale-id	Indonesian language support for standard utilities
+base-util_locale-it	Italian language support for standard utilities
+base-util_locale-ja	Japanese language support for standard utilities
+base-util_locale-sv Swedish language support for standard utilities
+comp-c-bin compilers and tools for the C programming language
+comp-c-catman formatted manual pages
+comp-c-include header files for the C programming language
+comp-c-lib static libraries and shared library links for the C programming language
+comp-c-lintlib data files for the lint(1) syntax checker
+comp-c-man manual pages source
+comp-c-piclib PIC libraries for C language shared library generation
+comp-c-proflib profiling libraries for the C programming language
+comp-c-root root file system symlinks for software development
+comp-c-share reference files for C language programmers
+comp-c-shlib	shared libraries for binary file utilities and machine opcodes
+comp-c_locale-da Danish language locale support for development utilities
+comp-c_locale-de German language locale support for development utilities
+comp-c_locale-es Spanish language locale support for development utilities
+comp-c_locale-fr French language locale support for development utilities
+comp-c_locale-ko Korean language locale support for development utilities
+comp-c_locale-nl Dutch language locale support for development utilities
+comp-c_locale-no Norwegian language locale support for development utilities
+comp-c_locale-pl Polish language locale support for development utilities
+comp-c_locale-pt Portuguese language locale support for development utilities
+comp-c_locale-sl Slovenian language locale support for development utilities
+comp-c_locale-sv Swedish language locale support for development utilities
+comp-cvs-bin utilities for CVS (Concurrent Version System)
+comp-cvs-catman formatted manual pages for the CVS version control system
+comp-cvs-man manual page source for the CVS version control system
+comp-cxx-bin compilers and tools for the C++ programming language
+comp-cxx-catman formatted manual pages for the C++ programming language
+comp-cxx-include header files for the C++ programming language
+comp-cxx-lib static libraries and shared library links for the C++ programming language
+comp-cxx-man manual pages source for the C++ programming language
+comp-cxx-piclib PIC libraries for C++ language shared library generation
+comp-cxx-proflib profiling libraries for the C++ programming language
+comp-debug-bin utilities for source code debugging
+comp-debug-catman formatted manual pages for debugging utilities
+comp-debug-man manual pages source for debugging utilities
+comp-debug-sbin utilities for kernel debugging
+comp-fortran-bin compilers and tools for the FORTRAN programming language
+comp-fortran-catman formatted manual pages for the FORTRAN programming language
+comp-fortran-lib static libraries and shared library links for the FORTRAN programming language
+comp-fortran-man manual pages source for the FORTRAN programming language
+comp-fortran-piclib PIC libraries for the FORTRAN language shared library generation
+comp-fortran-proflib profiling libraries for the FOTRAN programming language
+comp-fortran-shlib shared libraries for the FORTRAN programming language
+comp-i18n-lib static libraries and shared library links for compiling applications with internationalisation support
+comp-ipf-include header files for the IPfilter C API
+comp-krb5-catman formatted manual pages for Kerberos V support
+comp-krb5-include header files for Kerberos V support
+comp-krb5-lib 	libraries to support Kerberos V compilation
+comp-krb5-man 	source manual pages for Kerberos V support 
+comp-krb5-proflib 	profiling libraries for Kerberos V support 
+comp-krb5c-catman 	pre-formatted manual pages for Kerberos V C support
+comp-objc-bin compilers and tools for the Objective C programming language
+comp-objc-lib static libraries and shared library links for the Objective C programming language
+comp-objc-piclib PIC libraries for Objective C language shared library generation
+comp-objc-proflib profiling libraries for the Objective C programming language
+comp-sys-catman formatted manual pages for kernel programming
+comp-sys-man manual pages source for kernel programming
+comp-sys-shlib	shared library support for basic i386 math and utility libs
+comp-sysutil-catman formatted manual pages for system utilities
+comp-sysutil-man manual pages source for system utilities
+comp-sysutil-root manual pages source for system utilities
+comp-sysutil-sbin system utilities
+comp-util-bin programming utilities
+comp-util-catman formatted manual pages for programming utilities
+comp-util-man manual pages source for programming utilities
+comp-util-sbin system development utilities
+comp-util-share reference files for programming utilities
+etc-amd-rc startup script for auto-mounter daemon
+etc-audio-rc startup script for audio mixer control utility
+etc-bind-etc configuration files for BIND DNS server
+etc-bind-rc startup script for BIND DNS server
+etc-bootserver-etc configuration files for diskless boot server utilities
+etc-bootserver-rc startup script for diskless boot server utilities
+etc-cron-log empty log file for cron(8)
+etc-cron-rc startup script for cron(8) command scheduler
+etc-cron-root root file system support for cron(8) command scheduler
+etc-dhclient-etc configuration files for DHCP dyanamic host configuration protocol client utilities
+etc-dhclient-rc startup script for DHCP dynamic host configuration protocol client
+etc-dhcpd-rc startup script for DHCP dynamic host configuration protocol daemon
+etc-extsrc-rc startup scripts for externally added programs
+etc-games-etc configuration file for games
+etc-games-scores empty score files for games
+etc-ipf-rc startup scripts for IP filter
+etc-isdn-rc startup script for ISDN (Integrated Services Digital Network) network connectivity utilities
+etc-krb5-rc startup script for the Kerberos V authentication service
+etc-libsaslc-etc configuration file for the SASL C library
+etc-libsaslc-postfix configuration file for postfix SASL
+etc-lpr-etc configuration file for printing services
+etc-lpr-log empty log file for printing services
+etc-lpr-rc startup script for printing services
+etc-mail-etc configuration file for mail utilities
+etc-mailwrapper-etc configuration files for the mailwrapper(8) program for multiple mailer support
+etc-man-etc configuration files for the online manual pages
+etc-net-etc configuration files for networking
+etc-net-rc startup files for networking
+etc-netutil-etc configuration files for network utilities
+etc-netutil-log empty log files for networking utilities
+etc-nfsserver-rc startup script for NFS network file system server utilities
+etc-nis-rc startup script for the NIS network information system
+etc-nis-root root file system support for the NIS network file system
+etc-ntp-etc configuration files for the ntpd(8) Network Time Protocol server
+etc-ntp-rc startup script for the ntpd(8) Network Time Protocol server
+etc-pf-defaults default configuration files for the PF packet filter
+etc-pf-etc configuration files for the PF packet filter
+etc-postfix-etc configuration file for the postfix mailer program
+etc-postfix-rc startup script for the postfix mailer program
+etc-ppp-rc startup script for the PPP point-to-point connection protocol
+etc-root-root login configuration files for the user root
+etc-router-etc configuration files for network routing
+etc-router-rc startup scripts for routing services
+etc-secsh-etc configuration file for SSH secure remote shell utility
+etc-secsh-rc startup script for SSH secure remote shell utility
+etc-sendmail-etc configuration files for the sendmail(8) mailer
+etc-sendmail-log empty log files for the sendmail(8) mailer
+etc-sendmail-rc startup script for the sendmail(8) mailer
+etc-sys-defaults default system startup configuration files
+etc-sys-etc system software configuration files
+etc-sys-log empty system log files
+etc-sys-rc standard system startup scripts
+etc-sys-root required root file system structure for system software
+etc-sysutil-etc configuration files for miscellaneous system utilities
+etc-sysutil-log empty log files for miscellaneous system utilities
+etc-sysutil-rc	startup scripts for miscellaneous system utilities
+etc-timed-rc startup script for the timed(8) network time daemon
+etc-util-etc configuration file for standard system utilities
+etc-x11-rc startup scripts for the X11 X Window System
+games-games-bin command line games
+games-games-catman formatted manual pages for command-line games
+games-games-man manual pages source for command-line games
+games-games-root data and score files for command line games
+games-games-share shared data files for command-line games
+games-utils-bin miscellaneous utilities from /usr/games
+games-utils-catman formatted manual pages for miscellaneous utilities from /usr/games
+games-utils-man manual pages source for miscellaneous utilities from /usr/games
+games-utils-share shared data files for miscellaneous utilities from /usr/games
+man-adosfs-catman formatted manual pages for AmigaDOS file system support
+man-adosfs-man manual pages source for AmigaDOS file system support
+man-amd-catman formatted manual pages for the amd(8) auto-mounting daemon
+man-amd-info texinfo documentation for the amd(8) auto-mounting daemon
+man-amd-man manual pages source for the amd(8) auto-mounting daemon
+man-audio-catman formatted manual pages for utilities for playing and recording audio
+man-audio-man manual pages source for utilities for playing and recording audio
+man-bind-catman formatted manual pages for the bind(8) domain name server daemon
+man-bind-man manual pages source for the bind(8) domain name server daemon
+man-bootserver-catman formatted manual pages for utilities to support remote booting of diskless workstations
+man-bootserver-man manual pages source for utilities to support remote booting of diskless workstations
+man-c-catman formatted manual pages for the C programming language
+man-c-info the GNU texinfo software
+man-c-man manual pages source for the C programming language
+man-computil-info texinfo documentation for compiler utilities
+man-cron-catman formatted manual pages for the cron(8) command scheduler
+man-cron-man manual pages source for the cron(8) command scheduler
+man-crypto-catman formatted manual pages for cryptographic utilities
+man-crypto-man manual pages source for cryptographic utilities
+man-cvs-info texinfo documentation for the CVS version control system
+man-cxx-info texinfo documentation for the C++ programming language
+man-debug-catman formatted manual pages for debugging utilities
+man-debug-info texinfo documentation for debugging utilities
+man-debug-man manual pages source for debugging utilities
+man-dhclient-catman formatted manual pages for DHCP (dynamic host configuration protocol) client utilities
+man-dhclient-man manual pages source for DHCP (dynamic host configuration protocol) client utilities
+man-dhcpd-catman formatted manual pages for DHCP (dynamic host configuration protocol) server utilities
+man-dhcpd-man manual pages source for DHCP (dynamic host configuration protocol) server utilities
+man-efs-catman formatted manual pages for the Silicon Graphics efs file system support
+man-efs-man manual pages source for the Silicon Graphics efs file system support
+man-ext2fs-catman formatted manual pages for the Linux ext2fx file system support
+man-ext2fs-man manual pages source for the Linux ext2fx file system support
+man-filecorefs-catman formatted manual pages Acorn FileCore file system support
+man-filecorefs-man manual pages source Acorn FileCore file system support
+man-fortran-info texinfo documentation for the FORTRAN programming language
+man-games-catman formatted man pages for games
+man-games-man manual pages source for games
+man-gnats-catman formatted manual pages for the GNATS bug reported system
+man-gnats-info texinfo documentation for the GNATS bug reported system
+man-gnats-man manual pages source for the GNATS bug reported system
+man-groff-catman formatted manual pages for the groff documentation formatting utility
+man-groff-man manual pages source for the groff documentation formatting utility
+man-hesiod-catman formatted manual pages for the HESIOD network information system
+man-hesiod-man manual pages source for the HESIOD network information system
+man-info-share required file system structure for GNU texinfo documentation
+man-ipf-catman formatted manual pages for the IPfilter packet filtering software
+man-ipf-man manual pages source for the IPfilter packet filtering software
+man-isdn-catman formatted manual pages for ISDN (Integrated Services Data Networking) support
+man-isdn-man manual pages source for ISDN (Integrated Services Data Networking) support
+man-krb5-catman formatted manual pages for the Kerberos V network authentication system
+man-krb5-info the GNU texinfo software
+man-krb5-man manual pages source for the Kerberos V network authentication system
+man-locale-catman formatted manual pages for locale support utilities
+man-locale-man manual pages source for locale support utilities
+man-lpr-catman formatted manual pages for printing support
+man-lpr-man manual pages source for printing support
+man-mail-catman formatted manual pages for mail utilities
+man-mail-man manual pages source for mail utilities
+man-mailwrapper-catman formatted manual pages for the mailwrapper(8) program for multiple mailer support
+man-mailwrapper-man manual pages source for the mailwrapper(8) program for multiple mailer support
+man-man-catman formatted manual pages for the utilities for viewing the online manual
+man-man-man manual pages source for the utilities for viewing the online manual
+man-miscfs-catman the GNU texinfo software
+man-miscfs-man manual pages sources for miscellaneous file system support
+man-net-catman formatted manual pages for networking support
+man-net-man manual pages source for networking support
+man-netutil-catman formatted manual pages for networking utilities
+man-netutil-man manual pages source for networking utilities
+man-nfsclient-catman formatted manual pages for NFS (network file system) client utilities
+man-nfsclient-man manual pages source for NFS (network file system) client utilities
+man-nfsserver-catman formatted manual pages for NFS (network file system) server utilities
+man-nfsserver-man manual pages source for NFS (network file system) server utilities
+man-nis-catman formatted manual pages for the NIS network information system utilities
+man-nis-man manual pages source for the NIS network information system utilities
+man-ntfs-catman formatted manual pages for the Windows NT file system support
+man-ntfs-man manual pages source for the Windows NT file system support
+man-ntp-catman formatted manual pages for the network time protocol utilities
+man-ntp-man manual pages source for the network time protocol utilities
+man-pf-catman formatted manual pages for the PF packet filter
+man-pf-man manual page source for the PF packet filter
+man-pkgutil-catman formatted manual pages for the package system utilities
+man-pkgutil-man manual pages source for the package system utilities
+man-postfix-catman formatted manual pages for the postfix mailer
+man-postfix-man manual pages source for the postfix mailer
+man-ppp-catman formatted manual pages for the ppp point-to-point connection protocol
+man-ppp-man manual pages source for the ppp point-to-point connection protocol
+man-rc-catman formatted manual pages for system startup scripts
+man-rc-man manual pages source for system startup scripts
+man-rcs-catman formatted manual pages for the rcs(1) revision control system
+man-rcs-man manual pages source for the rcs(1) revision control system
+man-reference-catman formatted manual pages for miscellaneous system- and non-system-related reference documents
+man-reference-man manual pages source for miscellaneous system- and non-system-related reference documents
+man-router-catman formatted manual pages for routing utilities
+man-router-man manual pages source for routing utilities
+man-secsh-catman formatted manual pages for the ssh(1) remote secure shell connection utility
+man-secsh-man manual pages source for the ssh(1) remote secure shell connection utility
+man-sendmail-catman formatted manual pages for the sendmail(8) mailer
+man-sendmail-man manual pages source for the sendmail(8) mailer
+man-shlib-catman formatted manual pages for shared library support
+man-shlib-man manual pages source for shared library support
+man-slip-catman formatted manual pages for SLIP (serial line IP) remote access protocol
+man-slip-man manual pages source for SLIP (serial line IP) remote access protocol
+man-smbfs-catman	formatted manual pages for SMB filesystem
+man-smbfs-man	source manual pages for SMB filesystem
+man-sup-catman formatted manual pages for the sup(8) software update protocol
+man-sup-man manual pages source for the sup(8) software update protocol
+man-sys-catman formatted manual pages for base operating system functionality
+man-sys-info the GNU texinfo software
+man-sys-man manual pages source for base operating system functionality
+man-sysutil-catman formatted manual pages for system utilities
+man-sysutil-man manual pages source for system utilities
+man-texinfo-catman	formatted manual pages for texinfo utilities
+man-texinfo-info texinfo documentation for texinfo utilities
+man-texinfo-man	source manual pages for texinfo utilities
+man-timed-catman formatted manual pages for the timed(8) network time daemon
+man-timed-man manual pages source for the timed(8) network time daemon
+man-tn3270-catman formatted manual pages for utilities for connecting to IBM VM/CMS systems
+man-tn3270-man manual pages source for utilities for connecting to IBM VM/CMS systems
+man-util-catman formatted manual pages for basic user utilities
+man-util-info the GNU texinfo software
+man-util-man manual pages source for basic user utilities
+misc-amd-examples example configuration files for automatically mount file systems
+misc-bind-examples example configuration files for bind
+misc-bind-htmldoc HTML documentation for bind
+misc-crypto-examples example configuration files for cryptographic software
+misc-dhcpd-examples example configuration files for dhcpd(8)
+misc-fstab-examples example configuration files for file system tables
+misc-ipf-examples example configuration files for IPfilter
+misc-isdn-examples example configuration files for isdn
+misc-krb5-examples example configuration files for Kerberos5
+misc-libsaslc-examples example configuration files for libsaslc
+misc-netutil-examples example configuration files for network software
+misc-ntp-htmldoc HTML documentation for ntp(8) software
+misc-pf-examples
+misc-postfix-examples example configuration files for postfix
+misc-postfix-htmldoc	HTML documentation for postfix 
+misc-psd-doc the Programmer's Supplementary Documentation for BSD
+misc-reference-share miscellaneous reference documents
+misc-router-examples example configuration files for routing daemons
+misc-sendmail-share m4 templates for sendmail configuration
+misc-smm-doc the System Manager's Manual for BSD
+misc-sup-examples example configuration files for sup(8)
+misc-sys-examples example configuration files for kernel functionality
+misc-sysutil-examples example configuration files for system utilities
+misc-usd-doc the User's Supplementary Documents for BSD
+misc-util-htmldoc HTML documentation for miscellaneous utilities
+text-groff-bin the groff family of text formatters (nroff, troff, groff, and related utilities)
+text-groff-catman formatted manual pages for the groff family of text formatters
+text-groff-font fonts for the groff family of text formatters
+text-groff-man manual page source for the groff family of text formatters
+text-groff-share macros and data files for the groff family of text formatters
+text-texinfo-bin the GNU texinfo software
+text-texinfo-share	shared files for the GNU texinfo software
--- a/distrib/sets/culldeps
+++ b/distrib/sets/culldeps
@ -0,0 +1,84 @@
+#!/bin/sh
+#
+# culldeps
+#
+# Filter redundant dependencies.
+#
+# Each line of input and output contains two syspkg names,
+# where the first syspkg depends on the second syspkg.
+#
+# Emit all the dependencies on the standard input to the standard
+# output EXCEPT the dependencies which can be derived from other
+# dependencies by the transitive rule. For example, omit both A C
+# and A D from
+#
+# 	A B
+# 	B C
+# 	C D
+# 	A C
+# 	A D
+#
+# because A C can be derived from A B and B C by transitivity,
+# and A D can be derived from A B, B C, C D by transitivity.
+#
+
+prog="${0##*/}"
+rundir="$(dirname "$0")" # ${0%/*} isn't good enough when there's no "/"
+. "${rundir}/sets.subr"
+
+SCRATCH="$(${MKTEMP} -d "/var/tmp/${prog}.XXXXXX")"
+NEXTLEFTOVERS="${SCRATCH}/leftovers0"
+LASTJOIN="${SCRATCH}/join0"
+NEXTJOIN="${SCRATCH}/join1"
+TAB="	"
+
+${SORT} -k 1 > "${LASTJOIN}"
+
+LEFTOVERS="${LASTJOIN}"
+
+while [ "$(${WC} -l "${LASTJOIN}" | ${AWK} '{ print $1; }')" -ne 0 ]; do
+
+	#
+	# From dependencies X-requires-Y in ${LEFTOVERS} and Y-requires-Z in
+	# ${LASTJOIN}, produce dependencies X-requires-Z and write them to
+	# ${NEXTJOIN}.
+	#
+	${SORT} -k 2 < "${LEFTOVERS}" | \
+	    ${JOIN} -1 2 -2 1 -o '1.1 2.2' - "${LASTJOIN}" | \
+	    ${SORT} -u > "${NEXTJOIN}"
+	if [ ${DEBUG:-0} -gt 0 ]; then
+		echo >&2 "${prog}: ### begin filtered results ###"
+		${JOIN} -t "${TAB}" "${NEXTJOIN}" "${LEFTOVERS}" | ${SORT} 1>&2
+		echo >&2 "${prog}: ### end filtered results ###"
+	fi
+
+	#
+	# Filter out of ${LEFTOVERS} all of the dependencies X-requires-Z, which
+	# were produced in the previous step. Write the new leftovers to
+	# ${NEXTLEFTOVERS}.
+	#
+	${JOIN} -v 2 -t "${TAB}" "${NEXTJOIN}" "${LEFTOVERS}" | \
+		${SORT} -u > "${NEXTLEFTOVERS}"
+
+	#
+	# Swap output files before repeating. 
+	#
+	LASTJOIN="${NEXTJOIN}"
+	if [ "$(basename "${NEXTJOIN}")" = join0 ]; then
+		NEXTJOIN="${SCRATCH}/join1"
+	else
+		NEXTJOIN="${SCRATCH}/join0"
+	fi
+	LEFTOVERS="${NEXTLEFTOVERS}"
+	if [ "$(basename "${NEXTLEFTOVERS}")" = leftovers0 ]; then
+		NEXTLEFTOVERS="${SCRATCH}/leftovers1"
+	else
+		NEXTLEFTOVERS="${SCRATCH}/leftovers0"
+	fi
+done
+
+#
+# Output all of the dependencies that were not culled and clean up.
+#
+cat "${LEFTOVERS}"
+rm -r "${SCRATCH}"
--- a/distrib/sets/deps
+++ b/distrib/sets/deps
@ -0,0 +1,496 @@
+base-adosfs-root base-sys-root
+base-amd-bin base-sys-usr
+base-amd-examples base-sys-share
+base-amd-shlib base-sys-usr
+base-audio-bin base-sys-usr
+base-bind-bin base-sys-usr
+base-bind-root base-sys-root
+base-bootserver-bin base-sys-usr
+base-c-bin base-sys-usr
+base-c-usr base-sys-usr
+base-calendar-bin base-sys-usr
+base-calendar-share base-sys-share
+base-cron-bin base-sys-usr
+base-cron-root base-sys-root
+base-crypto-bin base-sys-usr
+base-crypto-examples base-sys-share
+base-crypto-root base-sys-root
+base-crypto-shlib base-sys-usr
+base-cxx-usr base-c-usr
+base-debug-bin base-sys-usr
+base-dhclient-root base-sys-root
+base-dhcpd-bin base-sys-share
+base-dhcpd-bin base-sys-usr
+base-dhcpd-examples base-sys-share
+base-efs-root base-sys-root
+base-ext2fs-root base-sys-root
+base-filecorefs-root base-sys-root
+base-fstab-examples base-sys-share
+base-games-root base-sys-root
+base-games-share base-sys-share
+base-games-usr base-sys-usr
+base-gnats-bin base-sys-usr
+base-gnats-share base-sys-share
+base-groff-font base-sys-share
+base-groff-share base-termcap-share
+base-hesiod-bin base-sys-usr
+base-htmldoc-share base-sys-share
+base-i18n-root base-sys-usr
+base-i18n-shlib base-i18n-root
+base-isdn-bin base-sys-usr
+base-isdn-examples base-sys-share
+base-krb5-bin base-sys-usr
+base-krb5-examples base-sys-share
+base-krb5-root base-sys-root
+base-krb5-shlib base-sys-usr
+base-libsaslc-examples base-sys-share
+base-locale-Pig base-locale-share
+base-locale-bg base-locale-share
+base-locale-bin base-sys-usr
+base-locale-ca base-locale-share
+base-locale-cs base-locale-share
+base-locale-da base-locale-share
+base-locale-de base-locale-share
+base-locale-el base-locale-share
+base-locale-en base-locale-share
+base-locale-eo base-locale-share
+base-locale-es base-locale-share
+base-locale-et base-locale-share
+base-locale-fi base-locale-share
+base-locale-fr base-locale-share
+base-locale-gl base-locale-share
+base-locale-he base-locale-share
+base-locale-hr base-locale-share
+base-locale-hu base-locale-share
+base-locale-hy base-locale-share
+base-locale-id base-locale-share
+base-locale-is base-locale-share
+base-locale-it base-locale-share
+base-locale-ja base-locale-share
+base-locale-ko base-locale-share
+base-locale-lt base-locale-share
+base-locale-nb base-locale-share
+base-locale-nl base-locale-share
+base-locale-no base-locale-share
+base-locale-pl base-locale-share
+base-locale-pt base-locale-share
+base-locale-ro base-locale-share
+base-locale-ru base-locale-share
+base-locale-share base-sys-share
+base-locale-sk base-locale-share
+base-locale-sl base-locale-share
+base-locale-sv base-locale-share
+base-locale-tr base-locale-share
+base-locale-uk base-locale-share
+base-locale-zh base-locale-share
+base-lpr-bin base-lpr-usr
+base-lpr-root base-sys-root
+base-lpr-usr base-sys-usr
+base-magic-share base-termcap-share
+base-mail-bin base-sys-usr
+base-mail-root base-sys-root
+base-mailwrapper-bin base-sys-usr
+base-man-bin base-sys-usr
+base-man-share base-sys-share
+base-miscfs-examples base-sys-share
+base-miscfs-root base-sys-root
+base-net-shlib base-sys-usr
+base-netutil-bin base-sys-usr
+base-netutil-examples base-sys-share
+base-netutil-root base-sys-usr
+base-nfsclient-bin base-sys-usr
+base-nfsclient-root base-sys-root
+base-nfsserver-bin base-sys-usr
+base-nis-bin base-sys-usr
+base-nis-root base-sys-root
+base-ntfs-root base-sys-root
+base-ntp-bin base-sys-usr
+base-ntp-root base-sys-root
+base-objc-usr base-c-usr
+base-pkgutil-bin base-sys-usr
+base-postfix-bin base-postfix-usr
+base-postfix-examples base-sys-share
+base-postfix-root base-sys-root
+base-postfix-usr base-sys-usr
+base-ppp-bin base-sys-usr
+base-psd-share base-sys-share
+base-rcs-bin base-sys-usr
+base-reference-share base-termcap-share
+base-rescue-root base-sys-root
+base-router-bin base-sys-usr
+base-router-examples base-sys-share
+base-router-root base-sys-root
+base-rpcbind-bin base-sys-usr
+base-rpcserver-bin base-sys-usr
+base-rpcutil-bin base-sys-usr
+base-secsh-bin base-sys-usr
+base-secsh-shlib base-sys-usr
+base-sendmail-bin base-sys-usr
+base-sendmail-root base-sys-root
+base-sendmail-share base-sys-share
+base-sendmail-usr base-c-usr
+base-slip-bin base-sys-usr
+base-slip-root base-sys-root
+base-smbfs-root base-sys-root
+base-smm-share base-sys-share
+base-sup-bin base-sys-usr
+base-sup-examples base-sys-share
+base-sys-examples base-sys-share
+base-sys-share base-sys-root
+base-sys-shlib base-sys-usr
+base-sys-usr base-sys-root
+base-sysutil-bin base-sys-usr
+base-sysutil-examples base-sys-share
+base-sysutil-root base-sys-usr
+base-sysutil-share base-sys-share
+base-termcap-share base-sys-share
+base-texinfo-bin base-sys-usr
+base-texinfo-share base-sys-share
+base-texinfo_locale-cs base-locale-cs
+base-texinfo_locale-da base-locale-da
+base-texinfo_locale-de base-locale-de
+base-texinfo_locale-eo base-locale-eo
+base-texinfo_locale-fr base-locale-fr
+base-texinfo_locale-he base-locale-he
+base-texinfo_locale-hr base-locale-hr
+base-texinfo_locale-ja base-locale-ja
+base-texinfo_locale-nb base-locale-nb
+base-texinfo_locale-nl base-locale-nl
+base-texinfo_locale-no base-locale-no
+base-texinfo_locale-pl base-locale-pl
+base-texinfo_locale-ro base-locale-ro
+base-texinfo_locale-ru base-locale-ru
+base-texinfo_locale-sv base-locale-sv
+base-texinfo_locale-tr base-locale-tr
+base-texinfo_locale-zh base-locale-zh
+base-timed-bin base-sys-usr
+base-tn3270-bin base-sys-usr
+base-usd-share base-sys-share
+base-util-bin base-sys-usr
+base-util-root base-sys-root
+base-util-share base-sys-share
+base-util_locale-cs base-locale-cs
+base-util_locale-de base-locale-de
+base-util_locale-el base-locale-el
+base-util_locale-eo base-locale-eo
+base-util_locale-es base-locale-es
+base-util_locale-et base-locale-et
+base-util_locale-fr base-locale-fr
+base-util_locale-gl base-locale-gl
+base-util_locale-hr base-locale-hr
+base-util_locale-id base-locale-id
+base-util_locale-it base-locale-it
+base-util_locale-ja base-locale-ja
+base-util_locale-sv base-locale-sv
+base-x11-root base-sys-root
+comp-c-bin base-sys-usr
+comp-c-catman base-man-share
+comp-c-include base-objc-usr
+comp-c-lib base-sys-usr
+comp-c-lintlib base-c-usr
+comp-c-man base-man-share
+comp-c-piclib base-sys-usr
+comp-c-proflib base-sys-usr
+comp-c-root base-sys-root
+comp-c-share base-termcap-share
+comp-c-shlib base-sys-usr
+comp-c_locale-be base-locale-share
+comp-c_locale-ca base-locale-ca
+comp-c_locale-cs base-locale-cs
+comp-c_locale-da base-locale-da
+comp-c_locale-de base-locale-de
+comp-c_locale-el base-locale-el
+comp-c_locale-en@boldquot base-locale-share
+comp-c_locale-en@quot base-locale-share
+comp-c_locale-es base-locale-es
+comp-c_locale-et base-locale-et
+comp-c_locale-fi base-locale-share
+comp-c_locale-fr base-locale-fr
+comp-c_locale-gl base-locale-gl
+comp-c_locale-id base-locale-id
+comp-c_locale-it base-locale-it
+comp-c_locale-ja base-locale-ja
+comp-c_locale-ko base-locale-ko
+comp-c_locale-nl base-locale-nl
+comp-c_locale-nn base-locale-share
+comp-c_locale-no base-locale-no
+comp-c_locale-pl base-locale-pl
+comp-c_locale-pr base-locale-pt
+comp-c_locale-pt_BR base-locale-pt
+comp-c_locale-ro base-locale-ro
+comp-c_locale-ru base-locale-ru
+comp-c_locale-sk base-locale-sk
+comp-c_locale-sl base-locale-sl
+comp-c_locale-sr base-locale-share
+comp-c_locale-sv base-locale-sv
+comp-c_locale-tr base-locale-tr
+comp-c_locale-uk base-locale-share
+comp-c_locale-zh_CN base-locale-zh
+comp-c_locale-zh_TW base-locale-zh
+comp-cvs-bin base-sys-usr
+comp-cvs-catman base-man-share
+comp-cvs-man base-man-share
+comp-cxx-bin base-sys-usr
+comp-cxx-catman base-man-share
+comp-cxx-include base-cxx-usr
+comp-cxx-lib base-sys-usr
+comp-cxx-man base-man-share
+comp-cxx-piclib base-sys-usr
+comp-cxx-proflib base-sys-usr
+comp-debug-bin base-sys-usr
+comp-debug-catman base-man-share
+comp-debug-man base-man-share
+comp-debug-sbin base-sys-usr
+comp-fortran-bin base-sys-usr
+comp-fortran-catman base-man-share
+comp-fortran-lib base-sys-usr
+comp-fortran-man base-man-share
+comp-fortran-proflib base-sys-usr
+comp-i18n-lib base-i18n-root
+comp-krb5-catman base-man-share
+comp-krb5-include base-c-usr
+comp-krb5-lib base-sys-usr
+comp-krb5-man base-man-share
+comp-krb5-proflib base-sys-usr
+comp-krb5c-catman base-man-share
+comp-objc-bin base-sys-usr
+comp-objc-lib base-sys-usr
+comp-objc-piclib base-sys-usr
+comp-objc-proflib base-sys-usr
+comp-sendmail-include base-sendmail-usr
+comp-sendmail-lib base-sys-usr
+comp-sendmail-lintlib base-c-usr
+comp-sys-catman base-man-share
+comp-sys-man base-man-share
+comp-sys-root base-sys-root
+comp-sysutil-catman base-man-share
+comp-sysutil-man base-man-share
+comp-util-bin base-sys-usr
+comp-util-catman base-man-share
+comp-util-man base-man-share
+comp-util-sbin base-sys-usr
+comp-util-share base-termcap-share
+comp-util-share base-util-share
+etc-amd-rc base-sys-root
+etc-audio-rc base-sys-root
+etc-bind-etc base-bind-root
+etc-bind-rc base-sys-root
+etc-bootserver-etc base-sys-root
+etc-bootserver-rc base-sys-root
+etc-cron-log base-sys-root
+etc-cron-rc base-sys-root
+etc-cron-root base-cron-root
+etc-dhclient-rc base-sys-root
+etc-dhcpd-rc base-sys-root
+etc-games-etc base-sys-root
+etc-games-scores base-games-root
+etc-ipf-rc base-sys-root
+etc-isdn-rc base-sys-root
+etc-krb5-rc base-sys-root
+etc-libsaslc-etc base-sys-root
+etc-libsaslc-postfix base-sys-root
+etc-lpr-etc base-sys-root
+etc-lpr-log base-sys-root
+etc-lpr-rc base-sys-root
+etc-mail-etc base-sys-root
+etc-mailwrapper-etc base-sys-root
+etc-man-etc base-sys-root
+etc-net-etc base-sys-root
+etc-net-rc base-sys-root
+etc-netutil-etc base-sys-root
+etc-netutil-log base-sys-root
+etc-nfsserver-rc base-sys-root
+etc-nis-rc base-sys-root
+etc-nis-root base-nis-root
+etc-ntp-etc base-sys-root
+etc-ntp-rc base-sys-root
+etc-postfix-etc base-postfix-bin
+etc-postfix-rc base-sys-root
+etc-ppp-rc base-sys-root
+etc-root-root base-sys-root
+etc-router-etc base-sys-root
+etc-router-rc base-sys-root
+etc-rpcbind-rc base-sys-root
+etc-secsh-etc base-sys-root
+etc-secsh-rc base-sys-root
+etc-sendmail-etc base-sendmail-root
+etc-sendmail-log base-sys-root
+etc-sendmail-rc base-sys-root
+etc-sys-defaults base-sys-root
+etc-sys-etc base-sys-root
+etc-sys-log base-sys-root
+etc-sys-rc base-sys-root
+etc-sys-root base-sys-root
+etc-sysutil-etc base-sysutil-bin
+etc-sysutil-log base-util-root
+etc-sysutil-rc base-sys-root
+etc-timed-rc base-sys-root
+etc-util-etc base-sys-root
+etc-x11-rc base-sys-root
+games-games-bin base-games-usr
+games-games-catman base-man-share
+games-games-man base-man-share
+games-games-root base-games-root
+games-games-share base-games-share
+games-sys-root base-sys-root
+games-usd-doc base-usd-share
+games-utils-bin base-games-usr
+games-utils-catman base-man-share
+games-utils-man base-man-share
+games-utils-share base-games-share
+man-adosfs-catman base-man-share
+man-adosfs-man base-man-share
+man-amd-catman base-man-share
+man-amd-info base-texinfo-share
+man-amd-man base-man-share
+man-audio-catman base-man-share
+man-audio-man base-man-share
+man-bind-catman base-man-share
+man-bind-man base-man-share
+man-bootserver-catman base-man-share
+man-bootserver-man base-man-share
+man-c-catman base-man-share
+man-c-info base-texinfo-share
+man-c-man base-man-share
+man-computil-info base-texinfo-share
+man-cron-catman base-man-share
+man-cron-man base-man-share
+man-crypto-catman base-man-share
+man-crypto-man base-man-share
+man-cvs-info base-texinfo-share
+man-debug-catman base-man-share
+man-debug-info base-texinfo-share
+man-debug-man base-man-share
+man-dhclient-catman base-man-share
+man-dhclient-man base-man-share
+man-dhcpd-catman base-man-share
+man-dhcpd-man base-man-share
+man-efs-catman base-man-share
+man-efs-man base-man-share
+man-ext2fs-catman base-man-share
+man-ext2fs-man base-man-share
+man-filecorefs-catman base-man-share
+man-filecorefs-man base-man-share
+man-fortran-info base-texinfo-share
+man-gnats-catman base-man-share
+man-gnats-info base-texinfo-share
+man-gnats-man base-man-share
+man-groff-catman base-man-share
+man-groff-info base-texinfo-share
+man-groff-man base-man-share
+man-hesiod-catman base-man-share
+man-hesiod-man base-man-share
+man-info-share base-texinfo-share
+man-ipf-catman base-man-share
+man-ipf-man base-man-share
+man-isdn-catman base-man-share
+man-isdn-man base-man-share
+man-krb5-catman base-man-share
+man-krb5-info base-texinfo-share
+man-krb5-man base-man-share
+man-locale-catman base-man-share
+man-locale-man base-man-share
+man-lpr-catman base-man-share
+man-lpr-man base-man-share
+man-mail-catman base-man-share
+man-mail-man base-man-share
+man-mailwrapper-catman base-man-share
+man-mailwrapper-man base-man-share
+man-man-catman base-man-share
+man-man-man base-man-share
+man-miscfs-catman base-man-share
+man-miscfs-man base-man-share
+man-net-catman base-man-share
+man-net-man base-man-share
+man-netutil-catman base-man-share
+man-netutil-man base-man-share
+man-nfsclient-catman base-man-share
+man-nfsclient-man base-man-share
+man-nfsserver-catman base-man-share
+man-nfsserver-man base-man-share
+man-nis-catman base-man-share
+man-nis-man base-man-share
+man-ntfs-catman base-man-share
+man-ntfs-man base-man-share
+man-ntp-catman base-man-share
+man-ntp-man base-man-share
+man-pkgutil-catman base-man-share
+man-pkgutil-man base-man-share
+man-postfix-catman base-man-share
+man-postfix-man base-man-share
+man-ppp-catman base-man-share
+man-ppp-man base-man-share
+man-rc-catman base-man-share
+man-rc-man base-man-share
+man-rcs-catman base-man-share
+man-rcs-man base-man-share
+man-reference-catman base-man-share
+man-reference-man base-man-share
+man-router-catman base-man-share
+man-router-man base-man-share
+man-rpcserver-catman base-man-share
+man-rpcserver-man base-man-share
+man-rpcutil-catman base-man-share
+man-rpcutil-man base-man-share
+man-secsh-catman base-man-share
+man-secsh-man base-man-share
+man-sendmail-catman base-man-share
+man-sendmail-man base-man-share
+man-shlib-catman base-man-share
+man-shlib-man base-man-share
+man-slip-catman base-man-share
+man-slip-man base-man-share
+man-smbfs-catman base-man-share
+man-smbfs-man base-man-share
+man-sup-catman base-man-share
+man-sup-man base-man-share
+man-sys-cat base-man-share
+man-sys-catman base-man-share
+man-sys-info base-texinfo-share
+man-sys-man base-man-share
+man-sys-root base-sys-root
+man-sysutil-catman base-man-share
+man-sysutil-man base-man-share
+man-texinfo-catman base-man-share
+man-texinfo-info base-texinfo-share
+man-texinfo-man base-man-share
+man-timed-catman base-man-share
+man-timed-man base-man-share
+man-tn3270-catman base-man-share
+man-tn3270-man base-man-share
+man-util-catman base-man-share
+man-util-info base-texinfo-share
+man-util-man base-man-share
+misc-amd-examples base-amd-examples
+misc-amd-examples base-sys-examples
+misc-bind-htmldoc base-htmldoc-share
+misc-crypto-examples base-crypto-examples
+misc-dhcpd-examples base-dhcpd-examples
+misc-fstab-examples base-fstab-examples
+misc-isdn-examples base-isdn-examples
+misc-krb5-examples base-krb5-examples
+misc-libsaslc-examples base-libsaslc-examples
+misc-netutil-examples base-netutil-examples
+misc-ntp-htmldoc base-man-share
+misc-postfix-examples base-postfix-examples
+misc-postfix-htmldoc base-htmldoc-share
+misc-psd-doc base-psd-share
+misc-reference-share base-reference-share
+misc-router-examples base-router-examples
+misc-sendmail-share base-sendmail-share
+misc-smm-doc base-smm-share
+misc-sup-examples base-sup-examples
+misc-sys-examples base-miscfs-examples
+misc-sys-examples base-sys-examples
+misc-sys-root base-sys-root
+misc-sysutil-examples base-sysutil-examples
+misc-usd-doc base-usd-share
+misc-util-htmldoc base-htmldoc-share
+text-groff-bin base-sys-usr
+text-groff-catman base-man-share
+text-groff-font base-groff-font
+text-groff-man base-man-share
+text-groff-share base-groff-share
+text-sys-root base-sys-root
+text-texinfo-bin base-sys-usr
+text-texinfo-share base-termcap-share
--- a/distrib/sets/descrs
+++ b/distrib/sets/descrs
@ -0,0 +1,847 @@
+minix-sys	Minix Complete system (to be fixed and properly put into separate packages)
+base-adosfs-root	Root file system support for Amiga DOS file system support
+base-amd-bin	auto-mounter daemon 
+base-amd-examples	example configuration files for the auto-mounter daemon and utilities
+base-amd-shlib	auto-mounter daemon shared library
+base-audio-bin	utilities for playing and recording audio
+base-bind-bin	the BIND DNS server
+base-bind-examples	example configuration files for BIND
+base-bind-root	root file system directories required by BIND
+base-bootserver-bin	software for booting diskless systems
+base-c-bin	utilities for the C programming language
+base-c-usr	/usr file system directories required by C programming language utilities
+base-calendar-bin	calendar(1) displays lines from the calendar database matching certain dates
+base-calendar-share	database of important dates for calendar(1)
+base-cron-bin	the cron daemon and related utilities
+base-cron-root	root file system directories required by the cron daemon
+base-crypto-bin	cryptographic utilities 
+base-crypto-examples	example configuration files for cryptographic utilities
+base-crypto-root	root file system directories required by cryptographic utilities
+base-crypto-shlib	shared library providing cryptographic routines
+base-cxx-usr	/usr file system directories required by C++ programming language utilities
+base-debug-bin	debugging utilities
+base-dhclient-root	root file system support for DHCP client software
+base-dhcpd-bin	DHCP server
+base-dhcpd-examples	example configuration files for DHCP server
+base-efs-root		root file system support for efs file system
+base-ext2fs-root	root file system support for ext2fs file system
+base-filecorefs-root	root file system support for the Acorn FILECORE file system
+base-fstab-examples	various example file system tables
+base-games-root	root file system support for games
+base-games-share	shared data files for games
+base-games-usr	directories for the games subsystem
+base-gnats-bin	the GNATS bug reporting utility
+base-gnats-share	shared data files for the GNATS bug reporting utility
+base-groff-font	fonts for the groff family of text formatters 
+base-groff-share	shared data files for the groff family of text formatters
+base-hesiod-bin	utilities for the HESIOD network information system
+base-htmldoc-share	HTML documentation
+base-i18n-root	directories for internationalisation support
+base-i18n-shlib	shared library modules for internationalisation support
+base-ipf-bin utilities for IPfilter
+base-ipf-root directories for IPfilter
+base-isdn-bin	utilities and daemons for ISDN network connectivity
+base-isdn-examples	directories for the ISDN example files
+base-krb5-bin	commands and utilities for the Kerberos V network authentication system
+base-krb5-examples	example configuration files for the Kerberos V network authentication system
+base-krb5-root	root file system support for the Kerberos V network authentication system
+base-krb5-shlib	root file system support for the Kerberos V network authentication system
+base-libsaslc-examples	example configuration files for the SASL C library
+base-locale-Pig	igPey atinLey ocaleley upportsey
+base-locale-af	Afghan language locale support
+base-locale-be	Belgian language locale support
+base-locale-bg	Bulgarian language locale support
+base-locale-bin	utilities for working with locales
+base-locale-ca	Catalan language locale support
+base-locale-cs	Czech language locale support
+base-locale-da	Danish language locale support
+base-locale-de	German language locale support
+base-locale-el	Greek language locale support
+base-locale-en	English language locale support
+base-locale-eo	Esperanto language locale support
+base-locale-es	Spanish language locale support
+base-locale-et Estonian language locale support
+base-locale-eu Basque language/region locale support
+base-locale-fi	Finnish language locale support
+base-locale-fr	French language locale support
+base-locale-gl	Galician language locale support
+base-locale-he	Hebrew language locale support
+base-locale-hr	Croatian language locale support
+base-locale-hu	Hungarian language locale support
+base-locale-hy	Armenian language locale support
+base-locale-id	Indonesian language locale support
+base-locale-is	Icelandic language locale support
+base-locale-it	Italian language locale support
+base-locale-ja	Japanese language locale support
+base-locale-kk	Kazakh language locale support
+base-locale-ko	Korean language locale support
+base-locale-lt	Lithuanian language locale support
+base-locale-nb	Norwegian Bokmal language locale support
+base-locale-nl	Dutch language locale support
+base-locale-nn	Norwegian Nynorsk language locale support
+base-locale-no	Norwegian language locale support
+base-locale-pl	Polish language locale support
+base-locale-pt	Portuguese language locale support
+base-locale-ro	Romanian language locale support
+base-locale-ru	Russian language locale support
+base-locale-share	/usr/share file system support for all locales 
+base-locale-sk	Slovak language locale support
+base-locale-sl	Slovenian language locale support
+base-locale-sr	Suriname language locale support
+base-locale-sv	Swedish language locale support
+base-locale-tr	Turkish language locale support
+base-locale-uk	Ukrainian language locale support
+base-locale-zh	Chinese language locale support
+base-lpr-bin	utilities for printing support
+base-lpr-root	root file system support for printing utilities
+base-lpr-usr	/usr file system support for printing 
+base-magic-share	shared files for the file(1) utility
+base-mail-bin	mail utilities
+base-mail-root	root file system support for mail utilities
+base-mailwrapper-bin	the mailwrapper(8) program for multiple mailer support 
+base-man-bin	utilities for reading online manual pages 
+base-man-share	shared data files for the online manual pages
+base-miscfs-examples	example configuration files for miscellaneous file systems
+base-miscfs-root	root file system support for miscellaneous file systems
+base-net-shlib	shared libraries for network programming
+base-netutil-bin	networking utilities
+base-netutil-examples	example configuration files for networking programs 
+base-netutil-root	root file system support for networking utilities
+base-nfsclient-bin	network file system client utilities
+base-nfsclient-root	root file system support for network file system client utilities
+base-nfsserver-bin	network file system server program
+base-nis-bin	progams and utilities for the NIS network information system
+base-nis-root	root file system support for the NIS network information system
+base-ntfs-root	root file system support for the Windows NT file system
+base-ntp-bin	utilities for network time protocol support
+base-ntp-root	basic directories for network time protocol support
+base-objc-usr	/usr file system support for the Objective C programming language
+base-pf-bin	utilities for the PF packet filter
+base-pf-root	directories for the PF packet filter
+base-pkgutil-bin	package system utilities
+base-postfix-bin	the Postfix mailer
+base-postfix-examples	example configuration files for the Postfix mailer
+base-postfix-root	root file system support for the Postfix mailer
+base-postfix-usr	/usr file system support for the Postfix mailer
+base-ppp-bin	utilities for the PPP point-to-point remote access protocol
+base-psd-share	directory structure for the Programmer's Supplementary Documentation 
+base-rcs-bin	utilities for the RCS Revision Control System
+base-reference-share	directory structure for miscellaneous reference documents
+base-rescue-root	statically-linked binaries which can be used in extremis
+base-router-bin	network routing utilities
+base-router-examples base directories for network routing utilities
+base-router-root	root file system support for network routing utilities
+base-secsh-bin	secure shell SSH client and server
+base-slip-bin	the SLIP serial line internet protocol
+base-slip-root	root file system support for the SLIP remote access protocol
+base-smbfs-root root file system support for the smbfs client SMB filesystem support
+base-smm-share	directory structure for the System Manager's Manual
+base-sup-bin	utilities for the SUP software update protocol
+base-sup-examples	example configuration files for the SUP software update protocol
+base-sys-devlinks	device node symbolic links
+base-sys-examples	example configuration files for kernel functionality
+base-sys-root	required root file system structure
+base-sys-share	required /usr/share file system structure
+base-sys-shlib	shared libraries for basic system functionality
+base-sys-usr	required /usr file system structure 
+base-sysutil-bin	system utilities
+base-sysutil-examples	example configuration files for miscellaneous system utilities
+base-sysutil-root	root file system support for system utilities
+base-sysutil-share	shared data files for system utilities
+base-sysutil_locale-share	shared locale support for system utilities
+base-termcap-share	shared files for terminal capability database
+base-texinfo-bin	the GNU texinfo software
+base-texinfo-share	shared data files for the GNU texinfo software
+base-texinfo_locale-cs	Czech language support for the GNU texinfo software
+base-texinfo_locale-da	Danish language support for the GNU texinfo software
+base-texinfo_locale-de	German language support for the GNU texinfo software
+base-texinfo_locale-eo	Esperanto language support for the GNU texinfo software
+base-texinfo_locale-fr	French language support for the GNU texinfo software
+base-texinfo_locale-he Hebrew language support for the GNU texinfo software
+base-texinfo_locale-hr Croatian language support for the GNU texinfo software
+base-texinfo_locale-ja Japanese language support for the GNU texinfo software
+base-texinfo_locale-nl Dutch language support for the GNU texinfo software
+base-texinfo_locale-no Norwegian Bokmal language support for the GNU texinfo software
+base-texinfo_locale-no Norwegian language support for the GNU texinfo software
+base-texinfo_locale-pl Polish language support for the GNU texinfo software
+base-texinfo_locale-pl Romanian language support for the GNU texinfo software
+base-texinfo_locale-ru Russian language support for the GNU texinfo software
+base-texinfo_locale-sv Swedish language support for the GNU texinfo software
+base-texinfo_locale-tr Turkish language support for the GNU texinfo software
+base-texinfo_locale-zh Chinese language support for the GNU texinfo software
+base-timed-bin	utilities for the timed(8) network time daemon
+base-tn3270-bin	utilities for connecting to IBM VM/CMS systems
+base-usd-share	directory structure for the User's Supplementary Documentation 
+base-util-bin	standard utilities for use by users
+base-util-root	root file system support for standard user utilities 
+base-util-share	shared data files for standard user utilities
+base-util_locale-cs	Czech language support for standard utilities
+base-util_locale-de	German language support for standard utilities
+base-util_locale-el	Greek language support for standard utilities
+base-util_locale-eo	Esperanto language support for standard utilities
+base-util_locale-es	Spanish language support for standard utilities
+base-util_locale-et Estonian language support for standard utilities
+base-util_locale-fr	French language support for standard utilities
+base-util_locale-gl	Galician language support for standard utilities
+base-util_locale-hr	Croatian language support for standard utilities
+base-util_locale-id	Indonesian language support for standard utilities
+base-util_locale-it	Italian language support for standard utilities
+base-util_locale-ja	Japanese language support for standard utilities
+base-util_locale-sv	Swedish language support for standard utilities
+comp-c-bin	
+comp-c-bin	This package includes compilers and tools for the C programming language:
+comp-c-bin	c89, c99, cc, gcc - C compilers
+comp-c-bin	flex, lex - lexical analyzer generator
+comp-c-bin	lint - C program validator
+comp-c-bin	rpcgen - RPC stub generator
+comp-c-bin	yacc - parser generator 
+comp-c-catman	
+comp-c-catman	
+comp-c-catman	
+comp-c-catman	
+comp-c-catman	
+comp-c-catman		c89, c99, cc, gcc - C compilers
+comp-c-catman		flex, lex - lexical analyzer generator
+comp-c-catman		lint - C program validator
+comp-c-catman		rpcgen - RPC stub generator
+comp-c-catman		yacc - parser generator
+comp-c-catman	This package includes formatted manual pages for compilers and tools for
+comp-c-catman	the C programming language:
+comp-c-include	This package contains header files for the C programming language,
+comp-c-include	including standard C and UNIX APIs, and APIs specific to the NetBSD
+comp-c-include	operating system.
+comp-c-lib	This contains library archives to build statically linked versions of C
+comp-c-lib	libraries.
+comp-c-lib	programs and simbolic links for use in linking software against shared
+comp-c-lintlib	C language syntax checker.
+comp-c-lintlib	This package contains library description files for use with the lint(1)
+comp-c-man	
+comp-c-man	
+comp-c-man	
+comp-c-man	
+comp-c-man	
+comp-c-man		c89, c99, cc, gcc - C compilers
+comp-c-man		flex, lex - lexical analyzer generator
+comp-c-man		lint - C program validator
+comp-c-man		rpcgen - RPC stub generator
+comp-c-man		yacc - program parser generator
+comp-c-man	This package includes the manual pages sources for compilers and tools
+comp-c-man	for the C programming language:
+comp-c-piclib	This includes archives of position-independent object files which can be
+comp-c-piclib	system.
+comp-c-piclib	used to recreate the shared libraries distributed with the base NetBSD
+comp-c-proflib	This includes versions of system libraries for use in profiling user code.
+comp-c-root	This contains data files installed in /var and used by C language
+comp-c-root	programming utilities.
+comp-c-share	This contains data files installed in /usr/share and used by C language
+comp-c-share	language.
+comp-c-share	programming utilities, including user reference documents on the C
+comp-c-shlib	shared libraries for binary file utilities and machine opcodes
+comp-c_locale-be	Belgian language locale support for development utilities
+comp-c_locale-ca	Canadian language locale support for development utilities
+comp-c_locale-cs	Czech language locale support for development utilities
+comp-c_locale-da	Danish language locale support for development utilities
+comp-c_locale-de	German language locale support for development utilities
+comp-c_locale-el	Greek language locale support for development utilities
+comp-c_locale-es	Spanish language locale support for development utilities
+comp-c_locale-et	Estonian language locale support for development utilities
+comp-c_locale-fi	Finnish language locale support for development utilities
+comp-c_locale-fr	French language locale support for development utilities
+comp-c_locale-gl	Galician language locale support for development utilities
+comp-c_locale-id	Indonesian language locale support for development utilities
+comp-c_locale-it	Italian language locale support for development utilities
+comp-c_locale-ja	Japanese language locale support for development utilities
+comp-c_locale-ko	Korean language locale support for development utilities
+comp-c_locale-nl	Dutch language locale support for development utilities
+comp-c_locale-nn	Norwegian Nynorsk language locale support for development utilities
+comp-c_locale-no	Norwegian language locale support for development utilities
+comp-c_locale-pl	Polish language locale support for development utilities
+comp-c_locale-pt_BR	Portuguese Brazilian language locale support for development utilities
+comp-c_locale-ro	Romanian language locale support for development utilities
+comp-c_locale-ru	Russian language locale support for development utilities
+comp-c_locale-sk	Slovak language locale support for development utilities
+comp-c_locale-sl	Slovenian language locale support for development utilities
+comp-c_locale-sr	Suriname language locale support for development utilities
+comp-c_locale-sv	Swedish language locale support for development utilities
+comp-c_locale-tr	Turkish language locale support for development utilities
+comp-c_locale-uk	Ukranian language locale support for development utilities
+comp-c_locale-zh_CN	Chinese language locale support for development utilities
+comp-c_locale-zh_TW	Taiwanese language locale support for development utilities
+comp-cvs-bin	CVS is a version control system, which allows you to keep old versions
+comp-cvs-bin	allows triggers to enable/log/control various operations and works well
+comp-cvs-bin	but operates on hierarchical collections of directories consisting of
+comp-cvs-bin	does not just operate on one file at a time or one directory at a time,
+comp-cvs-bin	occurred, etc., like RCS  or SCCS. Unlike the simpler systems, CVS
+comp-cvs-bin	of files (usually source code), keep a log of who, when, and why changes
+comp-cvs-bin	over a wide area network (see manual pages).
+comp-cvs-bin	the concurrent editing of source files among multiple authors. CVS
+comp-cvs-bin	version controlled files. CVS helps to manage releases and to control
+comp-cvs-catman	CVS does not just operate on one file at a time or one directory at a
+comp-cvs-catman	This contains groff-formatted manual pages for the CVS revision control
+comp-cvs-catman	changes occurred, etc., like RCS  or SCCS. Unlike the simpler systems,
+comp-cvs-catman	of version controlled files. CVS helps to manage releases and to control
+comp-cvs-catman	system. CVS is a version control system which allows you to keep old
+comp-cvs-catman	the concurrent editing of source files among multiple authors. CVS allows
+comp-cvs-catman	time, but operates on hierarchical collections of directories consisting
+comp-cvs-catman	triggers to enable/log/control various operations and works well over a
+comp-cvs-catman	versions of files (usually source code), keep a log of who, when, and why
+comp-cvs-catman	wide area network (see manual pages).
+comp-cvs-man	CVS is a version control system which allows you to keep old versions of
+comp-cvs-man	This contains manual page groff source for the CVS revision control system.
+comp-cvs-man	concurrent editing of source files among multiple authors. CVS allows
+comp-cvs-man	controlled files. CVS helps to manage releases and to control the
+comp-cvs-man	files (usually source code), keep a log of who, when, and why changes
+comp-cvs-man	not just operate on one file at a time or one directory at a time, but
+comp-cvs-man	occurred, etc., like RCS  or SCCS. Unlike the simpler systems, CVS does
+comp-cvs-man	operates on hierarchical collections of directories consisting of version
+comp-cvs-man	triggers to enable/log/control various operations and works well over a
+comp-cvs-man	wide area network (see manual pages).
+comp-cxx-bin	
+comp-cxx-bin		c++, g++ - C++ compiler
+comp-cxx-bin		c++filt - tool for demangling C++ single function names
+comp-cxx-bin		flex++ - C++ lexical analyzser generator (a C++ version of flex)
+comp-cxx-bin	This package includes compilers and tools for the C++ programming language:
+comp-cxx-catman	
+comp-cxx-catman		c++, g++ - C++ compiler
+comp-cxx-catman		c++filt - tool for demangling C++ single function names
+comp-cxx-catman		flex++ - C++ lexical analyzser generator (a C++ version of flex)
+comp-cxx-catman	C++ programming language:
+comp-cxx-catman	This contains groff-formatted manual pages on compilers and tools for the
+comp-cxx-include	This contains header files for the C++ programming language.
+comp-cxx-lib	This contains library archives to build statically linked versions of C++
+comp-cxx-lib	libraries.
+comp-cxx-lib	programs and simbolic links for use in linking software against shared
+comp-cxx-man	
+comp-cxx-man		c++, g++ - C++ compiler
+comp-cxx-man		c++filt - tool for demangling C++ single function names
+comp-cxx-man		flex++ - C++ lexical analyzser generator (a C++ version of flex)
+comp-cxx-man	This contains the manual page source on compilers and tools for the C++
+comp-cxx-man	programming language:
+comp-cxx-piclib	This includes archives of position-independent object files which can be
+comp-cxx-piclib	system.
+comp-cxx-piclib	used to recreate the shared C++ libraries distributed with the base NetBSD
+comp-cxx-proflib	This includes versions of system libraries for use in profiling user C++
+comp-cxx-proflib	code.
+comp-debug-bin	
+comp-debug-bin	
+comp-debug-bin	
+comp-debug-bin	
+comp-debug-bin		-ftest-coverage. These options cause the compiler to insert
+comp-debug-bin		addr2line - translates program addresses into file names and line
+comp-debug-bin		execution profile of C, Pascal, or Fortran77 programs.
+comp-debug-bin		gcov - displays basic block profile / coverage data, if requested
+comp-debug-bin		gdb - is the GNU debugger. The purpose of a debugger such as GDB
+comp-debug-bin		gprof - displays call graph profile data. gprof produces an
+comp-debug-bin		how often each basic block is executed; 
+comp-debug-bin		information in the executable to figure out which file name and
+comp-debug-bin		instrumentation into the object files it generates, which measure
+comp-debug-bin		is to allow you to see what is going on ``inside'' another program
+comp-debug-bin		it crashed;
+comp-debug-bin		line number are associated with a given address;
+comp-debug-bin		numbers. Given an address and an executable, it uses the debugging
+comp-debug-bin		via the C compiler gcc(1) command line options -fprofile-arcs and
+comp-debug-bin		while it executes, or what another program was doing at the moment
+comp-debug-bin	This package contains various C programming debugging utilities, such as:
+comp-debug-catman	
+comp-debug-catman	
+comp-debug-catman	
+comp-debug-catman	
+comp-debug-catman		-ftest-coverage. These options cause the compiler to insert
+comp-debug-catman		addr2line - translates program addresses into file names and line
+comp-debug-catman		execution profile of C, Pascal, or Fortran77 programs.
+comp-debug-catman		gcov - displays basic block profile / coverage data, if requested
+comp-debug-catman		gdb - is the GNU debugger. The purpose of a debugger such as GDB
+comp-debug-catman		gprof - displays call graph profile data. gprof produces an
+comp-debug-catman		how often each basic block is executed; 
+comp-debug-catman		information in the executable to figure out which file name and
+comp-debug-catman		instrumentation into the object files it generates, which measure
+comp-debug-catman		is to allow you to see what is going on ``inside'' another program
+comp-debug-catman		it crashed;
+comp-debug-catman		line number are associated with a given address;
+comp-debug-catman		numbers. Given an address and an executable, it uses the debugging
+comp-debug-catman		via the C compiler gcc(1) command line options -fprofile-arcs and
+comp-debug-catman		while it executes, or what another program was doing at the moment
+comp-debug-catman	This package contains formatted manual pages on various C programming
+comp-debug-catman	debugging utilities, such as:
+comp-debug-man	
+comp-debug-man	
+comp-debug-man	
+comp-debug-man	
+comp-debug-man		-ftest-coverage. These options cause the compiler to insert
+comp-debug-man		addr2line - translates program addresses into file names and line
+comp-debug-man		execution profile of C, Pascal, or Fortran77 programs.
+comp-debug-man		gcov - displays basic block profile / coverage data, if requested
+comp-debug-man		gdb - is the GNU debugger. The purpose of a debugger such as GDB
+comp-debug-man		gprof - displays call graph profile data. gprof produces an
+comp-debug-man		how often each basic block is executed; 
+comp-debug-man		information in the executable to figure out which file name and
+comp-debug-man		instrumentation into the object files it generates, which measure
+comp-debug-man		is to allow you to see what is going on ``inside'' another program
+comp-debug-man		it crashed;
+comp-debug-man		line number are associated with a given address;
+comp-debug-man		numbers. Given an address and an executable, it uses the debugging
+comp-debug-man		via the C compiler gcc(1) command line options -fprofile-arcs and
+comp-debug-man		while it executes, or what another program was doing at the moment
+comp-debug-man	This package contains the manual pages groff source on various C programming
+comp-debug-man	debugging utilities, such as:
+comp-debug-sbin	This package contains kgmon, a kernel debugging utility. kgmon is a tool
+comp-debug-sbin	extracts profile data from the operating system and produces a gmon.out
+comp-debug-sbin	file suitable for later analysis by gprof(1).
+comp-debug-sbin	kgmon indicates the state of operating system profiling as running, off,
+comp-debug-sbin	or not configured. (see config(8)) If the -p flag is specified, kgmon
+comp-debug-sbin	used when profiling the operating system. When no arguments are supplied,
+comp-fortran-bin	
+comp-fortran-bin	
+comp-fortran-bin	
+comp-fortran-bin		FORTRAN 77, also called F77). gcc processes input files through
+comp-fortran-bin		and F77 compilers are integrated; g77 is a program to call gcc
+comp-fortran-bin		asa - interpret carriage-control characters. The asa utility reads
+comp-fortran-bin		assembly, and linking. This manual page contains full descriptions
+comp-fortran-bin		contains summaries of some general-purpose options. For a fuller
+comp-fortran-bin		conventions into files formatted according to UNIX line printer
+comp-fortran-bin		conventions.
+comp-fortran-bin		explanation of the compiler, see gcc(1);
+comp-fortran-bin		f77, fort77, g77 - GNU project Fortran Compiler (v0.5.24). The C
+comp-fortran-bin		files formatted according to Fortran's carriage control
+comp-fortran-bin		files sequentially, mapping FORTRAN carriage-control characters
+comp-fortran-bin		for only F77-specific aspects of the compiler, though it also
+comp-fortran-bin		fpr - print Fortran file utility. fpr is a filter that transforms
+comp-fortran-bin		one or more of four stages: prepro- cessing, compilation,
+comp-fortran-bin		output;
+comp-fortran-bin		to line-printer control sequences, and writes them to the standard
+comp-fortran-bin		with options to recognize programs written in Fortran (ANSI
+comp-fortran-bin	This package contains compilers and tools for the FORTRAN programming
+comp-fortran-bin	language, including the following:
+comp-fortran-catman	
+comp-fortran-catman	
+comp-fortran-catman	
+comp-fortran-catman		FORTRAN 77, also called F77). gcc processes input files through
+comp-fortran-catman		and F77 compilers are integrated; g77 is a program to call gcc
+comp-fortran-catman		asa - interpret carriage-control characters. The asa utility reads
+comp-fortran-catman		assembly, and linking. This manual page contains full descriptions
+comp-fortran-catman		contains summaries of some general-purpose options. For a fuller
+comp-fortran-catman		conventions into files formatted according to UNIX line printer
+comp-fortran-catman		conventions.
+comp-fortran-catman		explanation of the compiler, see gcc(1);
+comp-fortran-catman		f77, fort77, g77 - GNU project Fortran Compiler (v0.5.24). The C
+comp-fortran-catman		files formatted according to Fortran's carriage control
+comp-fortran-catman		files sequentially, mapping FORTRAN carriage-control characters
+comp-fortran-catman		for only F77-specific aspects of the compiler, though it also
+comp-fortran-catman		fpr - print Fortran file utility. fpr is a filter that transforms
+comp-fortran-catman		one or more of four stages: prepro- cessing, compilation,
+comp-fortran-catman		output;
+comp-fortran-catman		to line-printer control sequences, and writes them to the standard
+comp-fortran-catman		with options to recognize programs written in Fortran (ANSI
+comp-fortran-catman	This package contains formatted manual pages for compilers and tools for
+comp-fortran-catman	the FORTRAN programming language, which include:
+comp-fortran-lib	FORTRAN programs and simbolic links for use in linking software against
+comp-fortran-lib	This contains library archives to build statically linked versions of
+comp-fortran-lib	shared libraries.
+comp-fortran-man	
+comp-fortran-man	
+comp-fortran-man	
+comp-fortran-man		FORTRAN 77, also called F77). gcc processes input files through
+comp-fortran-man		and F77 compilers are integrated; g77 is a program to call gcc
+comp-fortran-man		asa - interpret carriage-control characters. The asa utility reads
+comp-fortran-man		assembly, and linking. This manual page contains full descriptions
+comp-fortran-man		contains summaries of some general-purpose options. For a fuller
+comp-fortran-man		conventions into files formatted according to UNIX line printer
+comp-fortran-man		conventions.
+comp-fortran-man		explanation of the compiler, see gcc(1);
+comp-fortran-man		f77, fort77, g77 - GNU project Fortran Compiler (v0.5.24). The C
+comp-fortran-man		files formatted according to Fortran's carriage control
+comp-fortran-man		files sequentially, mapping FORTRAN carriage-control characters
+comp-fortran-man		for only F77-specific aspects of the compiler, though it also
+comp-fortran-man		fpr - print Fortran file utility. fpr is a filter that transforms
+comp-fortran-man		one or more of four stages: prepro- cessing, compilation,
+comp-fortran-man		output;
+comp-fortran-man		to line-printer control sequences, and writes them to the standard
+comp-fortran-man		with options to recognize programs written in Fortran (ANSI
+comp-fortran-man	This package contains manual pages groff sources for compilers and tools for
+comp-fortran-man	the FORTRAN programming language, which include:
+comp-fortran-piclib	NetBSD system.
+comp-fortran-piclib	This includes archives of position-independent object files which can be
+comp-fortran-piclib	used to recreate the shared FORTRAN libraries distributed with the base
+comp-fortran-proflib	FORTRAN code.
+comp-fortran-proflib	This includes versions of system libraries for use in profiling user
+comp-fortran-shlib	Shared libraries for the FORTRAN programming language
+comp-i18n-lib	static libraries and shared library links for compiling applications with internationalisation support
+comp-ipf-include header files for the IPfilter C API
+comp-krb5-catman formatted manual pages for Kerberos V support
+comp-krb5-include header files for Kerberos V support
+comp-krb5-lib 	libraries to support Kerberos V compilation
+comp-krb5-man 	source manual pages for Kerberos V support 
+comp-krb5-proflib 	profiling libraries for Kerberos V support 
+comp-krb5c-catman 	pre-formatted manual pages for Kerberos V C support
+comp-objc-bin	This contains the gcc backend for Objective C programming. With this
+comp-objc-bin	package installed, it is possible to compile Objective C programs with
+comp-objc-bin	the cc(1) or gcc(1) commands.
+comp-objc-lib	Objective C programs and simbolic links for use in linking software
+comp-objc-lib	This contains library archives to build statically linked versions of
+comp-objc-lib	against shared Objective C libraries.
+comp-objc-piclib	This includes archives of position-independent object files which can be
+comp-objc-piclib	base NetBSD system.
+comp-objc-piclib	used to recreate the shared Objective C libraries distributed with the
+comp-objc-proflib	Objective C code.
+comp-objc-proflib	This includes versions of system libraries for use in profiling user
+comp-sys-catman	This contains section 9 of the online manual pages for kernel programming,
+comp-sys-catman	of the kernel.
+comp-sys-catman	which describe APIs available for writing device drivers and other parts
+comp-sys-man	manual pages source for kernel programming
+comp-sys-shlib	shared library support for basic i386 math and utility libs
+comp-sysutil-catman	formatted manual pages for system utilities
+comp-sysutil-man	manual pages source for system utilities
+comp-sysutil-root	manual pages source for system utilities
+comp-sysutil-sbin	system utilities 
+comp-util-bin	programming utilities
+comp-util-catman	formatted manual pages for programming utilities
+comp-util-man	manual pages source for programming utilities
+comp-util-sbin	system development utilities
+comp-util-share	reference files for programming utilities 
+etc-amd-rc	startup script for auto-mounter daemon
+etc-audio-rc startup script for audio mixer control utility
+etc-bind-etc	configuration files for BIND DNS server
+etc-bind-rc	startup script for BIND DNS server
+etc-bootserver-etc	configuration files for diskless boot server utilities
+etc-bootserver-rc	startup script for diskless boot server utilities 
+etc-cron-log	empty log file for cron(8)
+etc-cron-rc	startup script for cron(8) command scheduler
+etc-cron-root	root file system support for cron(8) command scheduler
+etc-dhclient-etc	configuration files for DHCP dyanamic host configuration protocol client utilities
+etc-dhclient-rc	startup script for DHCP dynamic host configuration protocol client
+etc-dhcpd-rc	startup script for DHCP dynamic host configuration protocol daemon
+etc-extsrc-rc	startup scripts for externally added programs
+etc-games-etc	configuration file for games
+etc-games-scores	empty score files for games
+etc-ipf-rc	startup script for IP filter
+etc-iscsi-etc	configuration files for the NetBSD iSCSI target
+etc-iscsi-rc	startup script for the NetBSD iSCSI target
+etc-isdn-rc	startup script for ISDN (Integrated Services Digital Network) network connectivity utilities
+etc-krb5-rc	startup script for the Kerberos V authentication service 
+etc-libsaslc-etc	configuration file for SASL C library
+etc-libsaslc-postfix	configuration file for postfix SASL
+etc-lpr-etc	configuration file for printing services
+etc-lpr-log	empty log file for printing services
+etc-lpr-rc	startup script for printing services
+etc-mail-etc	configuration file for mail utilities
+etc-mailwrapper-etc	configuration files for the mailwrapper(8) program for multiple mailer support
+etc-man-etc	configuration files for the online manual pages
+etc-net-etc	configuration files for networking 
+etc-net-rc	startup files for networking
+etc-netutil-etc	configuration files for network utilities
+etc-netutil-log	empty log files for networking utilities 
+etc-nfsserver-rc	startup script for NFS network file system server utilities
+etc-nis-rc	startup script for the NIS network information system 
+etc-nis-root	root file system support for the NIS network file system 
+etc-ntp-etc	configuration files for the ntpd(8) Network Time Protocol server
+etc-ntp-rc	startup script for the ntpd(8) Network Time Protocol server
+etc-pf-defaults default configuration for the PF packet filter
+etc-pf-etc	configuration files for the PF packet filter
+etc-postfix-etc	configuration file for the postfix mailer program
+etc-postfix-rc	startup script for the postfix mailer program
+etc-ppp-rc	startup script for the PPP point-to-point connection protocol
+etc-root-root	login configuration files for the user root
+etc-router-etc	configuration files for network routing
+etc-router-rc	startup scripts for routing services
+etc-secsh-etc	configuration file for SSH secure remote shell utility
+etc-secsh-rc	startup script for SSH secure remote shell utility
+etc-sendmail-log	empty log files for the sendmail(8) mailer 
+etc-sys-defaults	default system startup configuration files
+etc-sys-etc	system software configuration files
+etc-sys-log	empty system log files
+etc-sys-rc	standard system startup scripts
+etc-sys-root	required root file system structure for system software
+etc-sysutil-etc	configuration files for miscellaneous system utilities
+etc-sysutil-log	empty log files for miscellaneous system utilities
+etc-sysutil-rc	startup scripts for miscellaneous system utilities
+etc-timed-rc	startup script for the timed(8) network time daemon
+etc-util-etc	configuration file for standard system utilities
+etc-x11-rc	startup scripts for the X11 X Window System
+games-games-bin	command line games 
+games-games-catman	formatted manual pages for command-line games
+games-games-man	manual pages source for command-line games
+games-games-root	data and score files for command line games
+games-games-share	shared data files for command-line games
+games-sys-root	required root file system structure for configuration files
+games-usd-doc	miscellaneous documentation for games
+games-utils-bin	miscellaneous utilities from /usr/games
+games-utils-catman	formatted manual pages for miscellaneous utilities from /usr/games
+games-utils-man	manual pages source for miscellaneous utilities from /usr/games
+games-utils-share	shared data files for miscellaneous utilities from /usr/games
+man-adosfs-catman	formatted manual pages for AmigaDOS file system support
+man-adosfs-man	manual pages source for AmigaDOS file system support
+man-amd-catman	formatted manual pages for the amd(8) auto-mounting daemon
+man-amd-info	texinfo documentation for the amd(8) auto-mounting daemon
+man-amd-man	manual pages source for the amd(8) auto-mounting daemon
+man-audio-catman	formatted manual pages for utilities for playing and recording audio
+man-audio-man	manual pages source for utilities for playing and recording audio
+man-bind-catman	formatted manual pages for the bind(8) domain name server daemon
+man-bind-man	manual pages source for the bind(8) domain name server daemon
+man-bootserver-catman	formatted manual pages for utilities to support remote booting of diskless workstations
+man-bootserver-man	manual pages source for utilities to support remote booting of diskless workstations
+man-c-catman	formatted manual pages for the C programming language
+man-c-info	the GNU texinfo software
+man-c-man	manual pages source for the C programming language
+man-computil-info	texinfo documentation for compiler utilities
+man-cron-catman	formatted manual pages for the cron(8) command scheduler
+man-cron-man	manual pages source for the cron(8) command scheduler
+man-crypto-catman	formatted manual pages for cryptographic utilities
+man-crypto-man	manual pages source for cryptographic utilities
+man-cvs-info	texinfo documentation for the CVS version control system
+man-cxx-info	texinfo documentation for the C++ programming language
+man-debug-catman	formatted manual pages for debugging utilities
+man-debug-info	texinfo documentation for debugging utilities
+man-debug-man	manual pages source for debugging utilities
+man-dhclient-catman	formatted manual pages for DHCP (dynamic host configuration protocol) client utilities
+man-dhclient-man	manual pages source for DHCP (dynamic host configuration protocol) client utilities
+man-dhcpd-catman	formatted manual pages for DHCP (dynamic host configuration protocol) server utilities
+man-dhcpd-man	manual pages source for DHCP (dynamic host configuration protocol) server utilities
+man-efs-catman		formatted manual pages for the Silicon Graphics EFS file system support
+man-efs-man		manual pages source for the Silicon Graphics EFS file system support
+man-ext2fs-catman	formatted manual pages for the Linux ext2fx file system support
+man-ext2fs-man	manual pages source for the Linux ext2fx file system support
+man-filecorefs-catman	formatted manual pages Acorn FileCore file system support
+man-filecorefs-man	manual pages source Acorn FileCore file system support
+man-fortran-info	texinfo documentation for the FORTRAN programming language
+man-games-catman	formatted manual pages for games
+man-games-man	manual pages source for games
+man-gnats-catman	formatted manual pages for the GNATS bug reported system
+man-gnats-info	texinfo documentation for the GNATS bug reported system
+man-gnats-man	manual pages source for the GNATS bug reported system
+man-groff-catman	formatted manual pages for the groff documentation formatting utility
+man-groff-man	manual pages source for the groff documentation formatting utility
+man-hesiod-catman	formatted manual pages for the HESIOD network information system
+man-hesiod-man	manual pages source for the HESIOD network information system
+man-hfs-catman	formatted manual pages for the HFS file system
+man-hfs-man	manual pages source for the HFS file system
+man-info-share	required file system structure for GNU texinfo documentation
+man-ipf-catman	formatted manual pages for the IPfilter packet filtering software
+man-ipf-man	manual pages source for the IPfilter packet filtering software
+man-iscsi-catman	formatted manual pages for NetBSD iSCSI target
+man-iscsi-man	manual pages source for NetBSD iSCSI target
+man-isdn-catman	formatted manual pages for ISDN (Integrated Services Data Networking) support
+man-isdn-man	manual pages source for ISDN (Integrated Services Data Networking) support
+man-krb5-catman	formatted manual pages for the Kerberos V network authentication system
+man-krb5-info	the GNU texinfo software
+man-krb5-man	manual pages source for the Kerberos V network authentication system
+man-locale-catman	formatted manual pages for locale support utilities
+man-locale-man	manual pages source for locale support utilities
+man-lpr-catman	formatted manual pages for printing support
+man-lpr-man	manual pages source for printing support
+man-mail-catman	formatted manual pages for mail utilities
+man-mail-man	manual pages source for mail utilities
+man-mailwrapper-catman	formatted manual pages for the mailwrapper(8) program for multiple mailer support 
+man-mailwrapper-man	manual pages source for the mailwrapper(8) program for multiple mailer support 
+man-man-catman	formatted manual pages for the utilities for viewing the online manual 
+man-man-man	manual pages source for the utilities for viewing the online manual 
+man-miscfs-catman	the GNU texinfo software
+man-miscfs-man	manual pages sources for miscellaneous file system support
+man-net-catman	formatted manual pages for networking support
+man-net-man	manual pages source for networking support
+man-netutil-catman	formatted manual pages for networking utilities
+man-netutil-man	manual pages source for networking utilities
+man-nfsclient-catman	formatted manual pages for NFS (network file system) client utilities
+man-nfsclient-man	manual pages source for NFS (network file system) client utilities
+man-nfsserver-catman	formatted manual pages for NFS (network file system) server utilities
+man-nfsserver-man	manual pages source for NFS (network file system) server utilities
+man-nis-catman	formatted manual pages for the NIS network information system utilities
+man-nis-man	manual pages source for the NIS network information system utilities
+man-ntfs-catman	formatted manual pages for the Windows NT file system support
+man-ntfs-man	manual pages source for the Windows NT file system support
+man-ntp-catman	formatted manual pages for the network time protocol utilities
+man-ntp-man	manual pages source for the network time protocol utilities
+man-pf-catman	formatted manual pages for the PF packet filter
+man-pf-man	manual page source for the PF packet filter
+man-pkgutil-catman	formatted manual pages for the package system utilities
+man-pkgutil-man	manual pages source for the package system utilities
+man-postfix-catman	formatted manual pages for the postfix mailer 
+man-postfix-man	manual pages source for the postfix mailer
+man-ppp-catman	formatted manual pages for the ppp point-to-point connection protocol
+man-ppp-man	manual pages source for the ppp point-to-point connection protocol
+man-rc-catman	formatted manual pages for system startup scripts
+man-rc-man	manual pages source for system startup scripts
+man-rcs-catman	formatted manual pages for the rcs(1) revision control system 
+man-rcs-man	manual pages source for the rcs(1) revision control system 
+man-reference-catman	formatted manual pages for miscellaneous system- and non-system-related reference documents 
+man-reference-man	manual pages source for miscellaneous system- and non-system-related reference documents 
+man-router-catman	formatted manual pages for routing utilities
+man-router-man		manual pages source for routing utilities
+man-rpcserver-catman	formatted manual pages for RPC server utility
+man-rpcserver-man	manual pages source for RPC server utility
+man-rpcutil-catman	formatted manual pages for RPC utility
+man-rpcutil-man		manual pages source for RPC utility
+man-secsh-catman	formatted manual pages for the ssh(1) remote secure shell connection utility
+man-secsh-man	manual pages source for the ssh(1) remote secure shell connection utility
+man-shlib-catman	formatted manual pages for shared library support
+man-shlib-man	manual pages source for shared library support
+man-slip-catman	formatted manual pages for SLIP (serial line IP) remote access protocol
+man-slip-man	manual pages source for SLIP (serial line IP) remote access protocol
+man-smbfs-catman	formatted manual pages for SMB filesystem
+man-smbfs-man	source manual pages for SMB filesystem
+man-sup-catman	formatted manual pages for the sup(8) software update protocol
+man-sup-man	manual pages source for the sup(8) software update protocol
+man-sys-catman	formatted manual pages for base operating system functionality
+man-sys-info	the GNU texinfo software
+man-sys-man	manual pages source for base operating system functionality
+man-sys-root	required root file system structure for manual pages
+man-sysutil-catman	formatted manual pages for system utilities
+man-sysutil-man	manual pages source for system utilities
+man-texinfo-catman	formatted manual pages for texinfo utilities
+man-texinfo-info	texinfo documentation for texinfo utilities
+man-texinfo-man	source manual pages for texinfo utilities
+man-timed-catman	formatted manual pages for the timed(8) network time daemon
+man-timed-man	manual pages source for the timed(8) network time daemon
+man-tn3270-catman	formatted manual pages for utilities for connecting to IBM VM/CMS systems
+man-tn3270-man	manual pages source for utilities for connecting to IBM VM/CMS systems
+man-util-catman	formatted manual pages for basic user utilities 
+man-util-info	the GNU texinfo software
+man-util-man	manual pages source for basic user utilities 
+misc-amd-examples	example configuration files for automatically mount file systems
+misc-bind-examples	example configuration files for bind
+misc-bind-htmldoc	HTML documentation for bind
+misc-crypto-examples	example configuration files for cryptographic software
+misc-dhcpd-examples	example configuration files for dhcpd(8)
+misc-fstab-examples	example configuration files for file system tables
+misc-ipf-examples	example configuration files for IPfilter
+misc-isdn-examples	example configuration files for isdn
+misc-krb5-examples	example configuration files for Kerberos5
+misc-libsaslc-examples	example configuration files for libsaslc 
+misc-netutil-examples	example configuration files for network software 
+misc-ntp-htmldoc	HTML documentation for ntp(8) software
+misc-pf-examples	example configuration files for the PF packet filter
+misc-ntp-htmldoc	HTML documentation for NTP
+misc-postfix-examples	example configuration files for postfix 
+misc-postfix-htmldoc	HTML documentation for postfix 
+misc-psd-doc	the Programmer's Supplementary Documentation for BSD
+misc-reference-share	miscellaneous reference documents
+misc-router-examples	example configuration files for routing daemons
+misc-smm-doc	the System Manager's Manual for BSD
+misc-sup-examples	example configuration files for sup(8)
+misc-sys-examples	example configuration files for kernel functionality
+misc-sysutil-examples	example configuration files for system utilities
+misc-usd-doc	the User's Supplementary Documents for BSD 
+misc-util-htmldoc	HTML documentation for miscellaneous utilities 
+text-groff-bin	Groff (GNU Troff) is a document processor which reads plain text mixed
+text-groff-bin	with formatting commands and produces formatted output. Included in this
+text-groff-bin	release are implementations of troff, pic, eqn, tbl, refer, the -man
+text-groff-bin	macros and the -ms macros, and drivers for PostScript, TeX dvi format, HP
+text-groff-bin	LaserJet 4 printers, HTML format (still alpha), and typewriter-like
+text-groff-bin	devices. Also included is a modified version of the Berkeley -me macros,
+text-groff-bin	an enhanced version of the X11 xditview previewer, and an implementation
+text-groff-bin	of the -mm macros. 
+text-groff-catman	This package contains manual page sources for the groff family of text
+text-groff-catman	formatters. As described in the DESCR file for text-groff-catman, the
+text-groff-catman	online manual pages for groff contain information about the following
+text-groff-catman	groff-related utilities:
+text-groff-catman	
+text-groff-catman	        grog - grog reads files and guesses which of the groff(1) options
+text-groff-catman	        -e, -man, -me, -mm, -ms, -p, -s, and -t are  required  for
+text-groff-catman	        printing  files, and  prints  the groff command including those
+text-groff-catman	        options on the standard output;
+text-groff-catman	
+text-groff-catman	        troff - describes the GNU version of troff, which is part of the
+text-groff-catman	        groff document formatting  system;
+text-groff-catman	
+text-groff-catman	        tbl - tbl compiles  descriptions  of tables embedded within troff
+text-groff-catman	        input files into commands that are understood  by  troff;
+text-groff-catman	
+text-groff-catman	        pic - pic compiles  descriptions  of  pictures embedded within
+text-groff-catman	        troff or TeX input files into commands that are understood  by
+text-groff-catman	        TeX or  troff;
+text-groff-catman	
+text-groff-catman	        eqn - compiles descriptions  of  equations  embedded  within  troff
+text-groff-catman	        input files  into  commands that are understood by troff
+text-groff-catman	
+text-groff-catman	        soelim - eliminate .so directives from nroff input
+text-groff-catman	
+text-groff-catman	        refer - preprocess bibliographic references for groff
+text-groff-catman	
+text-groff-catman	        grops - translates the output of GNU  troff  to  PostScript
+text-groff-catman	
+text-groff-catman	        grodvi - convert groff output to TeX dvi format
+text-groff-catman	
+text-groff-catman	        grotty - translates  the  output  of  GNU troff into a form
+text-groff-catman	        suitable for  typewriter-like  devices
+text-groff-catman	
+text-groff-catman	        groff_font  -  format of groff device and font description files
+text-groff-catman	
+text-groff-catman	        groff_out - groff intermediate output format
+text-groff-catman	
+text-groff-catman	        groff_ms, ms - groff ms macros
+text-groff-catman	
+text-groff-catman	        me - macros for formatting technical papers
+text-groff-catman	
+text-groff-catman	        groff_char - lists the standard groff input characters
+text-groff-catman	
+text-groff-font	
+text-groff-font	This package contains groff font description files. The font files for
+text-groff-font	device <name> are stored in a directory 'dev<name>'. There are two types
+text-groff-font	of files per device: a device description file called DESC and for each
+text-groff-font	font F a font file called F. These are text files; there is no associated
+text-groff-font	binary format. Available devices are:
+text-groff-font	       X100   For a 100dpi X11 previewer
+text-groff-font	       X75    For a 75 dpi X11 previewer
+text-groff-font	       ascii  For typewriter-like devices
+text-groff-font	       dvi    For TeX dvi format
+text-groff-font	       latin1 For  typewriter-like  devices using the ISO Latin-1
+text-groff-font	              character set.
+text-groff-font	       ps     For PostScript printers and previewers
+text-groff-man	This package contains manual page sources for the groff family of text
+text-groff-man	formatters. As described in the DESCR file for text-groff-catman, the
+text-groff-man	online manual pages for groff contain information about the following
+text-groff-man	groff-related utilities:
+text-groff-man	
+text-groff-man	        grog - grog reads files and guesses which of the groff(1) options
+text-groff-man	        -e, -man, -me, -mm, -ms, -p, -s, and -t are  required  for
+text-groff-man	        printing  files, and  prints  the groff command including those
+text-groff-man	        options on the standard output;
+text-groff-man	
+text-groff-man	        troff - describes the GNU version of troff, which is part of the
+text-groff-man	        groff document formatting  system;
+text-groff-man	
+text-groff-man	        tbl - tbl compiles  descriptions  of tables embedded within troff
+text-groff-man	        input files into commands that are understood  by  troff;
+text-groff-man	
+text-groff-man	        pic - pic compiles  descriptions  of  pictures embedded within
+text-groff-man	        troff or TeX input files into commands that are understood  by
+text-groff-man	        TeX or  troff;
+text-groff-man	
+text-groff-man	        eqn - compiles descriptions  of  equations  embedded  within  troff
+text-groff-man	        input files  into  commands that are understood by troff
+text-groff-man	
+text-groff-man	        soelim - eliminate .so directives from nroff input
+text-groff-man	
+text-groff-man	        refer - preprocess bibliographic references for groff
+text-groff-man	
+text-groff-man	        grops - translates the output of GNU  troff  to  PostScript
+text-groff-man	
+text-groff-man	        grodvi - convert groff output to TeX dvi format
+text-groff-man	
+text-groff-man	        grotty - translates  the  output  of  GNU troff into a form
+text-groff-man	        suitable for  typewriter-like  devices
+text-groff-man	
+text-groff-man	        groff_font  -  format of groff device and font description files
+text-groff-man	
+text-groff-man	        groff_out - groff intermediate output format
+text-groff-man	
+text-groff-man	        groff_ms, ms - groff ms macros
+text-groff-man	
+text-groff-man	        me - macros for formatting technical papers
+text-groff-man	
+text-groff-man	        groff_char - lists the standard groff input characters
+text-groff-man	
+text-groff-share	This package contains groff macros and data files for the macro sets
+text-groff-share	distributed with groff. These include:
+text-groff-share		man - wrapper for the man.old and mandoc macro sets for
+text-groff-share		displaying/printing the online manual pages;
+text-groff-share		man.old - old style manual page macros;
+text-groff-share		mandoc - a set of content-based and domain-based macros used to
+text-groff-share		format the BSD manual pages;
+text-groff-share		me, mm - formatting facility for technical papers in various
+text-groff-share		formats; mm has supports macro output in various languages other
+text-groff-share		than English;
+text-groff-share		mmse - example macro set file which generates macro output in
+text-groff-share		Swedish language;
+text-groff-share		ms - the Manuscript macros, set of macros for writing manuscripts;
+text-texinfo-bin	the GNU texinfo software
+text-texinfo-share	shared files for the GNU texinfo software
--- a/distrib/sets/getdirs.awk
+++ b/distrib/sets/getdirs.awk
@ -0,0 +1,80 @@
+#	$NetBSD: getdirs.awk,v 1.5 2012/02/08 16:51:09 njoly Exp $
+#
+# Copyright (c) 2002 The NetBSD Foundation, Inc.
+# All rights reserved.
+#
+# This code is derived from software contributed to The NetBSD Foundation
+# by Luke Mewburn of Wasabi Systems.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+
+function dirname(file) \
+{
+	# no need to worry about args that do not contain at least one "/"
+	gsub(/\/[^\/]+$/, "", file)
+	return file
+}
+
+#	skip empty or whitespace-only lines, or lines with comments
+#
+/^[ 	]*(#|$)/ \
+{
+	next
+}
+
+#	skip mtree config lines
+#
+/^\/(un)?set/ \
+{
+	next
+}
+
+#	error if consecutive slashes are found
+#
+/\/\// \
+{
+	print "Unsupported consecutive slashes in path:" >"/dev/stderr"
+	print >"/dev/stderr"
+	exit 1
+}
+
+#	all other lines are parsed 
+#
+{
+	print
+	file = $1
+	items[file]++
+	do {
+		file = dirname(file)
+		dirs[file]++
+	} while (file ~ /\//)
+}
+
+END \
+{
+	for (file in dirs) {
+		if (! (file in items))
+			print file " optional type=dir"
+	}
+}
--- a/Show More
+++ b/Show More