Commit graph

53 commits

Author SHA1 Message Date
Erik van der Kouwe
dcc683b4ae Also compile the kernel as i586 (instead of i386) 2011-07-22 13:16:10 +02:00
Ben Gras
eff1369cab print kernel stacktrace for exceptions in kernel
fpu alignment check feature, checksum feature
2011-07-22 11:03:45 +00:00
Evgeniy Ivanov
5da4a0bd56 Move minimal libc from libsys into separate lib.
Now users can choose between libsys, libsys + libminc and
libsys + libc. E.g. PUFFS/FUSE servers need libsys + libc while
old servers can use libsys + libminc.
2011-07-09 22:32:38 +02:00
Arun Thomas
b956c8735e Fix GCC image building 2011-07-09 15:04:42 +02:00
Arun Thomas
daa14edc0d kernel: make clang-buildable 2011-06-28 15:34:19 +02:00
Gianluca Guida
cc17b27a2b Build NetBSD libc library in world in ELF mode.
3 sets of libraries are built now:
  . ack: all libraries that ack can compile (/usr/lib/i386/)
  . clang+elf: all libraries with minix headers (/usr/lib/)
  . clang+elf: all libraries with netbsd headers (/usr/netbsd/)

Once everything can be compiled with netbsd libraries and headers, the
/usr/netbsd hierarchy will be obsolete and its libraries compiled with
netbsd headers will be installed in /usr/lib, and its headers
in /usr/include. (i.e. minix libc and current minix headers set
will be gone.)

To use the NetBSD libc system (libraries + headers) before
it is the default libc, see:
   http://wiki.minix3.org/en/DevelopersGuide/UsingNetBSDCode
This wiki page also documents the maintenance of the patch
files of minix-specific changes to imported NetBSD code.

Changes in this commit:
  . libsys: Add NBSD compilation and create a safe NBSD-based libc.
  . Port rest of libraries (except libddekit) to new header system.
  . Enable compilation of libddekit with new headers.
  . Enable kernel compilation with new headers.
  . Enable drivers compilation with new headers.
  . Port legacy commands to new headers and libc.
  . Port servers to new headers.
  . Add <sys/sigcontext.h> in compat library.
  . Remove dependency file in tree.
  . Enable compilation of common/lib/libc/atomic in libsys
  . Do not generate RCSID strings in libc.
  . Temporarily disable zoneinfo as they are incompatible with NetBSD format
  . obj-nbsd for .gitignore
  . Procfs: use only integer arithmetic. (Antoine Leca)
  . Increase ramdisk size to create NBSD-based images.
  . Remove INCSYMLINKS handling hack.
  . Add nbsd_include/sys/exec_elf.h
  . Enable ELF compilation with NBSD libc.
  . Add 'make nbsdsrc' in tools to download reference NetBSD sources.
  . Automate minix-port.patch creation.
  . Avoid using fstavfs() as it is *extremely* slow and unneeded.
  . Set err() as PRIVATE to avoid name clash with libc.
  . [NBSD] servers/vm: remove compilation warnings.
  . u32 is not a long in NBSD headers.
  . UPDATING info on netbsd hierarchy
  . commands fixes for netbsd libc
2011-06-24 11:46:30 +02:00
Arun Thomas
350b60661a ELF multiboot support 2011-05-04 18:51:43 +02:00
Gianluca Guida
fa59fc6eb4 Move shared headers in common/include
Headers that will be shared between old includes and NetBSD-like includes
are moved into common/include tree. They are still copied in /usr/include
in 'make includes', so compilation and programs aren't be affected.
2011-02-06 22:59:02 +00:00
Arun Thomas
361f377493 Fix multiboot for ACK-built images
Move the profiling buffer to the end of the data segment
2010-12-17 13:47:11 +00:00
Ben Gras
d87559f9b9 Fix for objdir feature of BSD make
contributed by Antoine Leca.
2010-11-24 13:44:42 +00:00
Arun Thomas
cfc1fe2ead kernel: Use LIBDIR var in Makefile
Instead of using a hard-coded path, use the LIBDIR variable so
the library path can be overridden.
2010-11-19 10:28:17 +00:00
Ben Gras
f3e1b1c226 Updated some CLEANFILES macros in Makefiles. 2010-11-17 14:27:23 +00:00
Arun Thomas
f0ab18377d GCC/clang: int64 routines in C 2010-11-12 18:38:10 +00:00
Tomas Hruby
62c666566e SMP - We boot APs
- kernel detects CPUs by searching ACPI tables for local apic nodes

- each CPU has its own TSS that points to its own stack. All cpus boot
  on the same boot stack (in sequence) but switch to its private stack
  as soon as they can.

- final booting code in main() placed in bsp_finish_booting() which is
  executed only after the BSP switches to its final stack

- apic functions to send startup interrupts

- assembler functions to handle CPU features not needed for single cpu
  mode like memory barries, HT detection etc.

- new files kernel/smp.[ch], kernel/arch/i386/arch_smp.c and
  kernel/arch/i386/include/arch_smp.h

- 16-bit trampoline code for the APs. It is executed by each AP after
  receiving startup IPIs it brings up the CPUs to 32bit mode and let
  them spin in an infinite loop so they don't do any damage.

- implementation of kernel spinlock

- CONFIG_SMP and CONFIG_MAX_CPUS set by the build system
2010-09-15 14:09:52 +00:00
Tomas Hruby
13a0d5fa5e SMP - Cpu local variables
- most global variables carry information which is specific to the
  local CPU and each CPU must have its own copy

- cpu local variable must be declared in cpulocal.h between
  DECLARE_CPULOCAL_START and DECLARE_CPULOCAL_END markers using
  DECLARE_CPULOCAL macro

- to access the cpu local data the provided macros must be used

	get_cpu_var(cpu, name)
	get_cpu_var_ptr(cpu, name)

	get_cpulocal_var(name)
	get_cpulocal_var_ptr(name)

- using this macros makes future changes in the implementation
  possible

- switching to ELF will make the declaration of cpu local data much
  simpler, e.g.

  CPULOCAL int blah;

  anywhere in the kernel source code
2010-09-15 14:09:46 +00:00
Ben Gras
eaa37fd21c make, lib changes to make gcc/clang format libraries in /usr/lib instead of /usr/gnu/lib. 2010-09-13 16:37:02 +00:00
Tomas Hruby
e6ebac015d APIC mode uses IO APICs
- kernel turns on IO APICs if no_apic is _not_ set or is equal 0

- pci driver must use the acpi driver to setup IRQ routing otherwise
  the system cannot work correctly except systems like KVM that use
  only legacy (E)ISA IRQs 0-15
2010-09-07 07:18:11 +00:00
Ben Gras
b3c3a1cb1e gcc compiles - add -fno-builtin so that gcc optimisations don't break things.
- kernel compile was broken with gcc as putchar() was added by gcc in
    stacktrace.c
  - add -fno-builtin everywhere to avoid such problems in the future
  - -fno-builtin in kernel now redundant
2010-08-31 16:42:44 +00:00
Ben Gras
fe343bb002 Make kernel ipc log scripts work for separate ${.OBJDIR}.
contributed by Antoine Leca.
2010-07-22 22:04:37 +00:00
Ben Gras
12e9303297 kernel: compile with -mi386 under gcc/clang to not generate SSE code in-kernel. 2010-07-12 10:11:50 +00:00
Ben Gras
f6f814cb02 include, kernel: minor fixes to make compiling and linking work with clang.
(fixing warnings)
2010-07-06 11:59:19 +00:00
Arun Thomas
c0c8d25799 Rename mkfiles from minix.*.mk to bsd.*.mk
Makes things easier for pkgsrc
2010-06-25 18:29:09 +00:00
Erik van der Kouwe
fe07e7c984 Optional IPC logging 2010-06-24 13:31:40 +00:00
Arun Thomas
8579c59b3f Minor makefile changes for GCC 2010-06-01 09:41:31 +00:00
Arun Thomas
b0159ad168 Buildsystem changes for GCC
-Makefile updates
-Update mkdep
-Build fixes/warning cleanups for some programs
-Restore leading underscores on global syms in kernel asm files
-Increase ramdisk size
2010-05-19 13:24:15 +00:00
Arun Thomas
4ed3a0cf3a Convert kernel over to bsdmake 2010-04-01 22:22:33 +00:00
Arun Thomas
b706112487 Incorporate bsdmake into buildsystem and reorganize libs 2010-02-16 14:41:33 +00:00
Tomas Hruby
5efa92f754 NMI watchdog is an awesome feature for debugging locked up kernels.
There is not that much use for it on a single CPU, however, deadlock
between kernel and system task can be delected. Or a runaway loop.

If a kernel gets locked up the timer interrupts don't occure (as all
interrupts are disabled in kernel mode). The only chance is to
interrupt the kernel by a non-maskable interrupt.

This patch generates NMIs using performance counters. It uses the most
widely available performace counters. As the performance counters are 
highly model-specific this patch is not guaranteed to work on every
machine.  Unfortunately this is also true for KVM :-/ On the other
hand adding this feature for other models is not extremely difficult
and the framework makes it hopefully easy enough.

Depending on the frequency of the CPU an NMI is generated at most
about every 0.5s If the cpu's speed is less then 2Ghz it is generated
at most every 1s. In general an NMI is generated much less often as
the performance counter counts down only if the cpu is not idle.
Therefore the overhead of this feature is fairly minimal even if the
load is high.

Uppon detecting that the kernel is locked up the kernel dumps the 
state of the kernel registers and panics.

Local APIC must be enabled for the watchdog to work.

The code is _always_ compiled in, however, it is only enabled if  
watchdog=<non-zero> is set in the boot monitor.

One corner case is serial console debugging. As dumping a lot of stuff
to the serial link may take a lot of time, the watchdog does not 
detect lockups during this time!!! as it would result in too many
false positives. 10 nmi have to be handled before the lockup is
detected. This means something between ~5s to 10s.

Another corner case is that the watchdog is enabled only after the
paging is enabled as it would be pure madness to try to get it right.
2010-01-16 20:53:55 +00:00
Tomas Hruby
ae75f9d4e5 Removal of the executable flag from files that cannot be executed
- 755 -> 644
2009-11-09 10:26:00 +00:00
Ben Gras
24e1e83028 really revert endpoint_t -> int
debugging info on panic: decode segment selectors and descriptors, now moved
to arch-specific part, prototypes added; sanity checking in debug.h made
optional with vmassert().
2009-10-05 15:47:23 +00:00
Ben Gras
c078ec0331 Basic VM and other minor improvements.
Not complete, probably not fully debugged or optimized.
2008-11-19 12:26:10 +00:00
Ben Gras
a2b1a5134b . leave out hardware-fp code from library
. minor packman usage tweaks
 . kernel feature for printing version number
 . removed some verbose debug messages from vfs/mfs
2007-04-12 16:45:00 +00:00
Ben Gras
9f2f3dd488 don't call mkdep with an absolute path 2007-02-08 16:26:20 +00:00
Ben Gras
6f77685609 Split of architecture-dependent and -independent functions for i386,
mainly in the kernel and headers. This split based on work by
Ingmar Alting <iaalting@cs.vu.nl> done for his Minix PowerPC architecture
port.

 . kernel does not program the interrupt controller directly, do any
   other architecture-dependent operations, or contain assembly any more,
   but uses architecture-dependent functions in arch/$(ARCH)/.
 . architecture-dependent constants and types defined in arch/$(ARCH)/include.
 . <ibm/portio.h> moved to <minix/portio.h>, as they have become, for now,
   architecture-independent functions.
 . int86, sdevio, readbios, and iopenable are now i386-specific kernel calls
   and live in arch/i386/do_* now.
 . i386 arch now supports even less 86 code; e.g. mpx86.s and klib86.s have
   gone, and 'machine.protected' is gone (and always taken to be 1 in i386).
   If 86 support is to return, it should be a new architecture.
 . prototypes for the architecture-dependent functions defined in
   kernel/arch/$(ARCH)/*.c but used in kernel/ are in kernel/proto.h
 . /etc/make.conf included in makefiles and shell scripts that need to
   know the building architecture; it defines ARCH=<arch>, currently only
   i386.
 . some basic per-architecture build support outside of the kernel (lib)
 . in clock.c, only dequeue a process if it was ready
 . fixes for new include files

files deleted:
 . mpx/klib.s - only for choosing between mpx/klib86 and -386
 . klib86.s - only for 86

i386-specific files files moved (or arch-dependent stuff moved) to arch/i386/:
 . mpx386.s (entry point)
 . klib386.s
 . sconst.h
 . exception.c
 . protect.c
 . protect.h
 . i8269.c
2006-12-22 15:22:27 +00:00
Ben Gras
7195fe3325 System statistical and call profiling
support by Rogier Meurs <rogier@meurs.org>.
2006-10-30 15:53:38 +00:00
Ben Gras
3172b4d0ad Patches by Jeff Bailey for posixifications. 2006-04-09 23:16:13 +00:00
Philip Homburg
7f861650b0 Use the sysutil library's printf code also for the kernel. 2006-03-15 16:15:23 +00:00
Jorrit Herder
c0718054e9 Various fixes and improvements.
- fixed bug that caused IDLE to panic (irq hook inconsistency);
- kprintf() now accepts multiple arguments; moved to utility.c;
- prepare_shutdown() signals system processes with SIGKSTOP;
- phys_fill() renamed to phys_memset(), argument order changed;
- kmemset() removed in favor of phys_kmemset();
- kstrncpy() removed in favor of phys_copy();
- katoi, kstrncmp replaced by normal library procedure again;
- rm_irq_handler() interface changed (simply pass hook pointer);
2005-07-20 15:25:38 +00:00
Ben Gras
c24f72d433 Made phys_fill fill its 4-byte pattern any number of bytes (instead of
rounded down to a 4-byte multiple)

Fixed dependency omission
2005-07-19 16:00:25 +00:00
Jorrit Herder
1d7bdd4ab1 *** empty log message *** 2005-07-19 15:01:47 +00:00
Jorrit Herder
42ab148155 Reorganized system call library; uses separate file per call now.
New configuration header file to include/ exclude functionality.
Extracted privileged features from struct proc and create new struct priv.
Renamed various system calls for readability.
2005-07-14 15:12:12 +00:00
Ben Gras
3dcb2886ff get/setpriority() and fsync() system calls 2005-07-01 18:01:33 +00:00
Jorrit Herder
bac6068857 Rewrite of process scheduling:
- current and maximum priority per process;
- quantum size and current ticks left per process;
- max number of full quantums in a row allow
  (otherwise current priority is decremented)
2005-06-30 15:55:19 +00:00
Jorrit Herder
a408699ce0 Cleaned up process table structure: removed p_type, p_pendcount.
Removed stop sequence when MINIX is shut down.
Disabled send mask checks --- to be replaced by proper mechanism.
Fixed bug relating to 'shutdown -x'.
Simplified clock accounting of realtime.
Updated Makefiles for mkdept script.
2005-06-24 16:24:40 +00:00
Jorrit Herder
403580e95b Removed unused code in proc.c. New message passing code with pointer pointers
is now in use. Rewrote ready() and unready() fuctions.
2005-06-20 11:26:48 +00:00
Jorrit Herder
0e2a7a9730 Kernel cleanup.
Reduced kernel size by 512KB by moving private buffer into cstart() function.
Replaced assertions with erroneous return values. Removed assertions relating
to isuserp(rp), since all processes should become user processes; system
processes are now treated similar to other processes.
2005-06-07 12:34:25 +00:00
Jorrit Herder
8d9c0886cd Created ECHO system call for testing purposes.
Furthermore, a quick way to get one's own process number.
2005-05-27 13:57:00 +00:00
Jorrit Herder
614f49b557 Fixed some comments and reorganized some code.
Fixed minor bug in notify() function.
2005-05-18 10:36:23 +00:00
Jorrit Herder
fbe1641bd3 User-space networking!
- RTL8139 driver moved to user-space;
- PCI code moved to user-space;
Fixed IRQ hook dump at IS server.
2005-05-11 09:02:00 +00:00
Ben Gras
e8973f33d4 *** empty log message *** 2005-05-04 09:31:54 +00:00