The BeagleBone Weather cape enhances the BeagleBone's capabilities
by providing environment sensors (temperature, humidity, pressure,
and ambient light level).
The weatherstation demo is a port of the bonescript weatherstation
to Minix. It provides a nice visual display of the sensor data in
a web browser.
The code is installed to /usr/share/beaglebone/weather on 'earm'
and an embedded web server is started at boot time on port 80
when the cape is attached. Further details are provided in the
README.txt file.
Change-Id: I1596a2b66b213762ace26c0c750c8154c76b5c6e
BeagleBone Capes add additional hardware to the BeagleBone to
improve functionality.
This patch probes the third i2c bus for capes and loads the
appropriate drivers for each detected cape. Currently only
the 'BeagleBone Weather' cape is supported.
Change-Id: Id8c133810db6de7c21625c2d5a794b8874673a0f
Add support for getting/setting the am335x SoC's internal real
time clock. Also, allow the power off alarm to be set.
Make readclock an "always on" driver. This is needed for setting
power-off alarms whenever the power button is pressed on the BBB.
Replace the readclock.sh script & single run driver with a
readclock program that takes the same arguments and forwards
the requests on to the always up readclock driver.
Change-Id: Ifd6c2acd80ae4b5e79d83df510df445c24e24a71
To do so, a few dependencies have been imported:
* external/bsd/lutok
* external/mit/lua
* external/public-domain/sqlite
* external/public-domain/xz
The Kyua framework is the new generation of ATF (Automated Test
Framework), it is composed of:
* external/bsd/atf
* external/bsd/kyua-atf-compat
* external/bsd/kyua-cli
* external/bsd/kyua-tester
* tests
Kyua/ATF being written in C++, it depends on libstdc++ which is
provided by GCC. As this is not part of the sources, Kyua is only
compiled when the native GCC utils are installed.
To install Kyua do the following:
* In a cross-build enviromnent, add the following to the build.sh
commandline: -V MKBINUTILS=yes -V MKGCCCMDS=yes
WARNING:
At this point the import is still experimental, and not supported
on native builds (a.k.a make build).
Change-Id: I26aee23c5bbd2d64adcb7c1beb98fe0d479d7ada
This program uses the i2c /dev interface to read the
contents of EEPROMs and display it to the user in
HEX and ASCII. It also has a mode that can display
data in label:value pairs. That mode is used for
board detection in the rc script to start the right
i2c drivers for the board.
Change-Id: I0bf5b13ffab5a89533c762d6881a145cf7f14914
-By adding MKGCC=yes and MKGCCCMDS=yes on the make commandline
it is now possible to compile and install GCC on the system.
Before doing this, if you are not using the build.sh script,
you will need to call the fetch scripts in order to retrieve
the sources of GCC and its dependencies.
-Reduce difference with NetBSD share/mk
Move Minix-specific parameters from bsd.gcc.mk to bsd.own.mk,
which is anyway patched, so that bsd.gcc.mk is now aligned
on the NetBSD version.
-Clean libraries dependencies, compiles stdc++ only if gcc is
also compiled (it is part of the gcc sources)
-Correct minix.h header sequence, cleanup spec headers.
-Fix cross-compilation from a 32bit host targeting MINIX/arm
Change-Id: I1b234af18eed4ab5675188244e931b2a2b7bd943
- Enable installing binutils from the base system.
- Import texinfo which is required for the binutils tools
to be compiled.
- Also adapted the fetch rules to correctly generate the
gitignore files for gcc, and allow the case of multiple
modules in the same directory, as found in gnu/dist.
Warning: This patch has an entry in docs/UPDATING
Change-Id: Ib781734e8fd7f9c6265fa65d62ba2cf3fccbc5ba
* Added --with-ld=default
* Added --with-lto
* Fixed ld script for ARM
* Options are prepared for future activation of gold.
Change-Id: Id9618904055e18d1b37f5e9585f775c367ff356e
Implement getrusage.
These fields of struct rusage are not supported and always set to zero at this time
long ru_nswap; /* swaps */
long ru_inblock; /* block input operations */
long ru_oublock; /* block output operations */
long ru_msgsnd; /* messages sent */
long ru_msgrcv; /* messages received */
long ru_nvcsw; /* voluntary context switches */
long ru_nivcsw; /* involuntary context switches */
test75.c is the unit test for this new function
Change-Id: I3f1eb69de1fce90d087d76773b09021fc6106539
Clock configuration will be needed by other/future subsystems such as i2c.
Extract the functionality from libgpio and put it into it's own library.
Change-Id: I6f6de0b3fb4d305ddfeac74123b78c983d1318dd
. test74 for mmap functionality
. vm: add a mem_file memory type that specifies an mmap()ped
memory range, backed by a file
. add fdref, an object that keeps track of FD references within
VM per process and so knows how to de-duplicate the use of FD's
by various mmap()ped ranges; there can be many more than there can
be FD's
. turned off for now, enable with 'filemap=1' as boot option
Change-Id: I640b1126cdaa522a0560301cf6732b7661555672
Primary purpose of change: to support the mmap implementation, VM must
know both (a) about some block metadata for FS cache blocks, i.e.
inode numbers and inode offsets where applicable; and (b) know about
*all* cache blocks, i.e. also of the FS primary caches and not just
the blocks that spill into the secondary one. This changes the
interface and VM data structures.
This change is only for the interface (libminixfs) and VM data
structures; the filesystem code is unmodified, so although the
secondary cache will be used as normal, blocks will not be annotated
with inode information until the FS is modified to provide this
information. Until it is modified, mmap of files will fail gracefully
on such filesystems.
This is indicated to VFS/VM by returning ENOSYS for REQ_PEEK.
Change-Id: I1d2df6c485e6c5e89eb28d9055076cc02629594e
This commit removes the secondary cache code implementation from
VM and its usage from libminixfs. It is to be replaced by a new
implementation.
Change-Id: I8fa3af06330e7604c7e0dd4cbe39d3ce353a05b1
. test70: regression test for m_out vfs race condition
The following tests use testcache.c to generate test i/o
patterns, generate random write data and verify the reads.
. test71: blackbox full-stack test of FS operation, testing
using the regular VFS interface crazy i/o patterns
with various working set sizes, triggering only
primary cache, also secondary cache, and finally
disk i/o and verifying contents all the time
. test72: unit test of libminixfs, implementing
functions it needs from -lsys and -lblockdriver
and the client in order to simulate a working
cache client and backend environment.
. test73: blackbox test of secondary vm cache in isolation
Change-Id: I1287e9753182b8719e634917ad158e3c1e079ceb
This files defines two constants which are only used through
sys/syslimits. So they where moved there instead of including the file
and it was removed.
Change-Id: Iba3d220144dddf5d6411a6c66e2f223a1aafb50f
* Also cleanup a bit the makefile.
* Also removing small inconsistency for arm builds where log would be
skipped if doing a make hdboot, but not when cross-compiling.
Change-Id: Ic9e20655234a667ea8a967d05589d4df46c2d521
Import the NetBSD rdate command and remove the Minix rdate command.
The default behaviour for both is the same. The NetBSD version adds
options to just display the time, adjust the time using adjtime(),
and set the time without printing the time.
Porting Notes:
- Compiles cleanly out of the box without any warnings
- Path changes from /usr/bin/rdate to /usr/sbin/rdate
- checked pkgsrc for any usages of rdate (none found)
- checked src for any usages of rdate (none found)
Testing:
- all command line options work (tested with time.nist.gov server)
- Native and cross build OK
Change-Id: I613449763891a896527f337999c006a970c3924c
. split user-editable and system-owned files in etc/Makefile
. mtab is a symlink, not a file now; remove it
. force-install of certain system-controlled /etc files from
top Makefile
. rename /etc/make.conf to /etc/mk.conf; and don't set $ARCH;
reduce difference in bsd.own.mk
Change-Id: I9f4bbb8d37ba80cba7dcfcf1a9a89e934910f579
Install /home/ast and /home/bin as part of the system build procedure,
as the setup script is not ran on the arm image.
/home/bin is needed for successful completion of our test suite.
This patch does not change the setup script, as it is not bothered by
those files/directiories being already there, and may be useful during
reinstallation on intel systems.
Change-Id: I358c881df09223c343442673aa0822937f9ea33c
The build system distinction between "bootprog" and "service" is
meaningless as boot programs are standard services.
As minix.service.mk simply imports minix.bootprog.mk, reduce confusion
by removing minix.bootprog.mk and placing the rules in minix.service.mk.
Change-Id: I4056b1e574bed59a8c890239b41b1a7c7cad63e8
This patch introduces a framebuffer to Minix. It's written for the ARM
port of Minix, but has an architectural split that separates the
hardware dependent part from the non-hardware dependent part. Futhermore,
this driver was developed using a screen that has a native resolution of
1024x600 pixels and having lack of support for obtaining EDID from the
screen. Consequently, it uses a hardcoded resolution of 1024x600.
The driver uses an interface based on the Linux ioctl API, but supports
only a very limited subset.
* Generalize GPIO handling.
* Add libs to configure gpio's clocks and pads
* Add Interrupt handling.
* Introduce mmio.h and log.h
Change-Id: I928e4c807d15031de2eede4b3ecff62df795f8ac
Small GPIO driver that exports a few pins using a virtual file
system. Currently the two user leds and the user button are exported.
Change-Id: I001d017ae27cd17b635587873f7da981054da459
Due to the ABI we are using we have to use the earm architecture
moniker for the build system to behave correctly. This involves
then some headers to move around.
There is also a few related Makefile updates as well as minor
source code corrections.
As the release script does not copy over files from the currently
running system anymore, it has appeared that some binaries are
looking for the dynamic loader in /lib instead of /usr/lib.
It has been replaced by a symlink to ensure compatibility with
binaries, until the path is updated in all the toolchains to be
the same.
* Remade patch so it works with minix patch tool.
* New MINIX tar support -ox, so revert back to it
In fetch scripts, tar had been replaced by bsdtar as the prebvious
tar did not support the -o flag under minix, which is required to
prevent usage of tar file stored user and group information.
This introduces portability problems. As our new tar tool now
support that flag revert back to improve portability.
upgrade to NetBSD CVS release from 2012/10/17 12:00:00 UTC
Makefiles updates to imporve portability
Made sure to be consistent in the usage of braces/parenthesis at
least on a per file basis. For variables, it is recommended to
continue to use braces.
The tested targets are the followgin ones:
* tools
* distribution
* sets
* release
The remaining NetBSD targets have not been disabled nor tested
*at all*. Try them at your own risk, they may reboot the earth.
For all compliant Makefiles, objects and generated files are put in
MAKEOBJDIR, which means you can now keep objects between two branch
switching. Same for DESTDIR, please refer to build.sh options.
Regarding new or modifications of Makefiles a few things:
* Read share/mk/bsd.README
* If you add a subdirectory, add a Makefile in it, and have it called
by the parent through the SUBDIR variable.
* Do not add arbitrary inclusion which crosses to another branch of
the hierarchy; If you can't do without it, put a comment on why.
If possible, do not use inclusion at all.
* Use as much as possible the infrastructure, it is here to make
life easier, do not fight it.
Sets and package are now used to track files.
We have one set called "minix", composed of one package called "minix-sys"
