minix/kernel/system.c

656 lines
23 KiB
C
Raw Normal View History

2005-04-21 16:53:53 +02:00
/* This task handles the interface between the kernel and user-level servers.
* System services can be accessed by doing a system call. System calls are
* transformed into request messages, which are handled by this task. By
* convention, a sys_call() is transformed in a SYS_CALL request message that
* is handled in a function named do_call().
*
* A private call vector is used to map all system calls to the functions that
* handle them. The actual handler functions are contained in separate files
* to keep this file clean. The call vector is used in the system task's main
* loop to handle all incoming requests.
*
* In addition to the main sys_task() entry point, which starts the main loop,
* there are several other minor entry points:
* get_priv: assign privilege structure to user or system process
IPC privileges fixes Kernel: o Remove s_ipc_sendrec, instead using s_ipc_to for all send primitives o Centralize s_ipc_to bit manipulation, - disallowing assignment of bits pointing to unused priv structs; - preventing send-to-self by not setting bit for own priv struct; - preserving send mask matrix symmetry in all cases o Add IPC send mask checks to SENDA, which were missing entirely somehow o Slightly improve IPC stats accounting for SENDA o Remove SYSTEM from user processes' send mask o Half-fix the dependency between boot image order and process numbers, - correcting the table order of the boot processes; - documenting the order requirement needed for proper send masks; - warning at boot time if the order is violated RS: o Add support in /etc/drivers.conf for servers that talk to user processes, - disallowing IPC to user processes if no "ipc" field is present - adding a special "USER" label to explicitly allow IPC to user processes o Always apply IPC masks when specified; remove -i flag from service(8) o Use kernel send mask symmetry to delay adding IPC permissions for labels that do not exist yet, adding them to that label's process upon creation o Add VM to ipc permissions list for rtl8139 and fxp in drivers.conf Left to future fixes: o Removal of the table order vs process numbers dependency altogether, possibly using per-process send list structures as used for SYSTEM calls o Proper assignment of send masks to boot processes; some of the assigned (~0) masks are much wider than necessary o Proper assignment of IPC send masks for many more servers in drivers.conf o Removal of the debugging warning about the now legitimate case where RS's add_forward_ipc cannot find the IPC destination's label yet
2009-07-02 18:25:31 +02:00
* set_sendto_bit: allow a process to send messages to a new target
* unset_sendto_bit: disallow a process from sending messages to a target
2010-07-07 00:05:21 +02:00
* fill_sendto_mask: fill the target mask of a given process
* send_sig: send a signal directly to a system process
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
* cause_sig: take action to cause a signal to occur via a signal mgr
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
* sig_delay_done: tell PM that a process is not sending
* get_randomness: accumulate randomness in a buffer
* clear_endpoint: remove a process' ability to send and receive messages
* sched_proc: schedule a process
2005-04-21 16:53:53 +02:00
*
* Changes:
Rewrite of boot process KERNEL CHANGES: - The kernel only knows about privileges of kernel tasks and the root system process (now RS). - Kernel tasks and the root system process are the only processes that are made schedulable by the kernel at startup. All the other processes in the boot image don't get their privileges set at startup and are inhibited from running by the RTS_NO_PRIV flag. - Removed the assumption on the ordering of processes in the boot image table. System processes can now appear in any order in the boot image table. - Privilege ids can now be assigned both statically or dynamically. The kernel assigns static privilege ids to kernel tasks and the root system process. Each id is directly derived from the process number. - User processes now all share the static privilege id of the root user process (now INIT). - sys_privctl split: we have more calls now to let RS set privileges for system processes. SYS_PRIV_ALLOW / SYS_PRIV_DISALLOW are only used to flip the RTS_NO_PRIV flag and allow / disallow a process from running. SYS_PRIV_SET_SYS / SYS_PRIV_SET_USER are used to set privileges for a system / user process. - boot image table flags split: PROC_FULLVM is the only flag that has been moved out of the privilege flags and is still maintained in the boot image table. All the other privilege flags are out of the kernel now. RS CHANGES: - RS is the only user-space process who gets to run right after in-kernel startup. - RS uses the boot image table from the kernel and three additional boot image info table (priv table, sys table, dev table) to complete the initialization of the system. - RS checks that the entries in the priv table match the entries in the boot image table to make sure that every process in the boot image gets schedulable. - RS only uses static privilege ids to set privileges for system services in the boot image. - RS includes basic memory management support to allocate the boot image buffer dynamically during initialization. The buffer shall contain the executable image of all the system services we would like to restart after a crash. - First step towards decoupling between resource provisioning and resource requirements in RS: RS must know what resources it needs to restart a process and what resources it has currently available. This is useful to tradeoff reliability and resource consumption. When required resources are missing, the process cannot be restarted. In that case, in the future, a system flag will tell RS what to do. For example, if CORE_PROC is set, RS should trigger a system-wide panic because the system can no longer function correctly without a core system process. PM CHANGES: - The process tree built at initialization time is changed to have INIT as root with pid 0, RS child of INIT and all the system services children of RS. This is required to make RS in control of all the system services. - PM no longer registers labels for system services in the boot image. This is now part of RS's initialization process.
2009-12-11 01:08:19 +01:00
* Nov 22, 2009 get_priv supports static priv ids (Cristiano Giuffrida)
2005-10-14 11:13:52 +02:00
* Aug 04, 2005 check if system call is allowed (Jorrit N. Herder)
* Jul 20, 2005 send signal to services with message (Jorrit N. Herder)
* Jan 15, 2005 new, generalized virtual copy function (Jorrit N. Herder)
2005-04-21 16:53:53 +02:00
* Oct 10, 2004 dispatch system calls from call vector (Jorrit N. Herder)
* Sep 30, 2004 source code documentation updated (Jorrit N. Herder)
*/
#include "kernel/kernel.h"
#include "kernel/system.h"
#include "kernel/vm.h"
#include "kernel/clock.h"
2005-04-21 16:53:53 +02:00
#include <stdlib.h>
#include <assert.h>
2005-04-21 16:53:53 +02:00
#include <signal.h>
#include <unistd.h>
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
#include <minix/endpoint.h>
#include <minix/safecopies.h>
2005-04-21 16:53:53 +02:00
2005-04-29 17:36:43 +02:00
/* Declaration of the call vector that defines the mapping of system calls
* to handler functions. The vector is initialized in sys_init() with map(),
* which makes sure the system call numbers are ok. No space is allocated,
* because the dummy is declared extern. If an illegal call is given, the
* array size will be negative and this won't compile.
2005-04-21 16:53:53 +02:00
*/
2012-03-25 20:25:53 +02:00
static int (*call_vec[NR_SYS_CALLS])(struct proc * caller, message *m_ptr);
2005-04-21 16:53:53 +02:00
#define map(call_nr, handler) \
{ int call_index = call_nr-KERNEL_CALL; \
assert(call_index >= 0 && call_index < NR_SYS_CALLS); \
call_vec[call_index] = (handler) ; }
2005-04-29 17:36:43 +02:00
2012-03-25 20:25:53 +02:00
static void kernel_call_finish(struct proc * caller, message *msg, int result)
{
if(result == VMSUSPEND) {
/* Special case: message has to be saved for handling
* until VM tells us it's allowed. VM has been notified
* and we must wait for its reply to restart the call.
*/
assert(RTS_ISSET(caller, RTS_VMREQUEST));
assert(caller->p_vmrequest.type == VMSTYPE_KERNELCALL);
caller->p_vmrequest.saved.reqmsg = *msg;
caller->p_misc_flags |= MF_KCALL_RESUME;
} else {
/*
* call is finished, we could have been suspended because of VM,
* remove the request message
*/
caller->p_vmrequest.saved.reqmsg.m_source = NONE;
if (result != EDONTREPLY) {
/* copy the result as a message to the original user buffer */
msg->m_source = SYSTEM;
msg->m_type = result; /* report status of call */
#if DEBUG_IPC_HOOK
hook_ipc_msgkresult(msg, caller);
2010-06-24 15:31:40 +02:00
#endif
No more intel/minix segments. This commit removes all traces of Minix segments (the text/data/stack memory map abstraction in the kernel) and significance of Intel segments (hardware segments like CS, DS that add offsets to all addressing before page table translation). This ultimately simplifies the memory layout and addressing and makes the same layout possible on non-Intel architectures. There are only two types of addresses in the world now: virtual and physical; even the kernel and processes have the same virtual address space. Kernel and user processes can be distinguished at a glance as processes won't use 0xF0000000 and above. No static pre-allocated memory sizes exist any more. Changes to booting: . The pre_init.c leaves the kernel and modules exactly as they were left by the bootloader in physical memory . The kernel starts running using physical addressing, loaded at a fixed location given in its linker script by the bootloader. All code and data in this phase are linked to this fixed low location. . It makes a bootstrap pagetable to map itself to a fixed high location (also in linker script) and jumps to the high address. All code and data then use this high addressing. . All code/data symbols linked at the low addresses is prefixed by an objcopy step with __k_unpaged_*, so that that code cannot reference highly-linked symbols (which aren't valid yet) or vice versa (symbols that aren't valid any more). . The two addressing modes are separated in the linker script by collecting the unpaged_*.o objects and linking them with low addresses, and linking the rest high. Some objects are linked twice, once low and once high. . The bootstrap phase passes a lot of information (e.g. free memory list, physical location of the modules, etc.) using the kinfo struct. . After this bootstrap the low-linked part is freed. . The kernel maps in VM into the bootstrap page table so that VM can begin executing. Its first job is to make page tables for all other boot processes. So VM runs before RS, and RS gets a fully dynamic, VM-managed address space. VM gets its privilege info from RS as usual but that happens after RS starts running. . Both the kernel loading VM and VM organizing boot processes happen using the libexec logic. This removes the last reason for VM to still know much about exec() and vm/exec.c is gone. Further Implementation: . All segments are based at 0 and have a 4 GB limit. . The kernel is mapped in at the top of the virtual address space so as not to constrain the user processes. . Processes do not use segments from the LDT at all; there are no segments in the LDT any more, so no LLDT is needed. . The Minix segments T/D/S are gone and so none of the user-space or in-kernel copy functions use them. The copy functions use a process endpoint of NONE to realize it's a physical address, virtual otherwise. . The umap call only makes sense to translate a virtual address to a physical address now. . Segments-related calls like newmap and alloc_segments are gone. . All segments-related translation in VM is gone (vir2map etc). . Initialization in VM is simpler as no moving around is necessary. . VM and all other boot processes can be linked wherever they wish and will be mapped in at the right location by the kernel and VM respectively. Other changes: . The multiboot code is less special: it does not use mb_print for its diagnostics any more but uses printf() as normal, saving the output into the diagnostics buffer, only printing to the screen using the direct print functions if a panic() occurs. . The multiboot code uses the flexible 'free memory map list' style to receive the list of free memory if available. . The kernel determines the memory layout of the processes to a degree: it tells VM where the kernel starts and ends and where the kernel wants the top of the process to be. VM then uses this entire range, i.e. the stack is right at the top, and mmap()ped bits of memory are placed below that downwards, and the break grows upwards. Other Consequences: . Every process gets its own page table as address spaces can't be separated any more by segments. . As all segments are 0-based, there is no distinction between virtual and linear addresses, nor between userspace and kernel addresses. . Less work is done when context switching, leading to a net performance increase. (8% faster on my machine for 'make servers'.) . The layout and configuration of the GDT makes sysenter and syscall possible.
2012-05-07 16:03:35 +02:00
if (copy_msg_to_user(msg, (message *)caller->p_delivermsg_vir)) {
printf("WARNING wrong user pointer 0x%08x from "
"process %s / %d\n",
caller->p_delivermsg_vir,
caller->p_name,
caller->p_endpoint);
cause_sig(proc_nr(caller), SIGSEGV);
}
}
}
}
2005-04-21 16:53:53 +02:00
2012-03-25 20:25:53 +02:00
static int kernel_call_dispatch(struct proc * caller, message *msg)
2005-04-21 16:53:53 +02:00
{
int result = OK;
int call_nr;
2010-06-24 15:31:40 +02:00
#if DEBUG_IPC_HOOK
hook_ipc_msgkcall(msg, caller);
2010-06-24 15:31:40 +02:00
#endif
call_nr = msg->m_type - KERNEL_CALL;
2005-04-21 16:53:53 +02:00
/* See if the caller made a valid request and try to handle it. */
if (call_nr < 0 || call_nr >= NR_SYS_CALLS) { /* check call number */
printf("SYSTEM: illegal request %d from %d.\n",
call_nr,msg->m_source);
2005-04-21 16:53:53 +02:00
result = EBADREQUEST; /* illegal message type */
}
else if (!GET_BIT(priv(caller)->s_k_call_mask, call_nr)) {
printf("SYSTEM: denied request %d from %d.\n",
call_nr,msg->m_source);
result = ECALLDENIED; /* illegal message type */
} else {
/* handle the system call */
if (call_vec[call_nr])
result = (*call_vec[call_nr])(caller, msg);
else {
printf("Unused kernel call %d from %d\n",
call_nr, caller->p_endpoint);
result = EBADREQUEST;
}
}
2005-04-21 16:53:53 +02:00
return result;
}
/*===========================================================================*
* kernel_call *
*===========================================================================*/
/*
* this function checks the basic syscall parameters and if accepted it
* dispatches its handling to the right handler
*/
2012-03-25 20:25:53 +02:00
void kernel_call(message *m_user, struct proc * caller)
{
int result = OK;
message msg;
caller->p_delivermsg_vir = (vir_bytes) m_user;
/*
* the ldt and cr3 of the caller process is loaded because it just've trapped
* into the kernel or was already set in switch_to_user() before we resume
* execution of an interrupted kernel call
*/
No more intel/minix segments. This commit removes all traces of Minix segments (the text/data/stack memory map abstraction in the kernel) and significance of Intel segments (hardware segments like CS, DS that add offsets to all addressing before page table translation). This ultimately simplifies the memory layout and addressing and makes the same layout possible on non-Intel architectures. There are only two types of addresses in the world now: virtual and physical; even the kernel and processes have the same virtual address space. Kernel and user processes can be distinguished at a glance as processes won't use 0xF0000000 and above. No static pre-allocated memory sizes exist any more. Changes to booting: . The pre_init.c leaves the kernel and modules exactly as they were left by the bootloader in physical memory . The kernel starts running using physical addressing, loaded at a fixed location given in its linker script by the bootloader. All code and data in this phase are linked to this fixed low location. . It makes a bootstrap pagetable to map itself to a fixed high location (also in linker script) and jumps to the high address. All code and data then use this high addressing. . All code/data symbols linked at the low addresses is prefixed by an objcopy step with __k_unpaged_*, so that that code cannot reference highly-linked symbols (which aren't valid yet) or vice versa (symbols that aren't valid any more). . The two addressing modes are separated in the linker script by collecting the unpaged_*.o objects and linking them with low addresses, and linking the rest high. Some objects are linked twice, once low and once high. . The bootstrap phase passes a lot of information (e.g. free memory list, physical location of the modules, etc.) using the kinfo struct. . After this bootstrap the low-linked part is freed. . The kernel maps in VM into the bootstrap page table so that VM can begin executing. Its first job is to make page tables for all other boot processes. So VM runs before RS, and RS gets a fully dynamic, VM-managed address space. VM gets its privilege info from RS as usual but that happens after RS starts running. . Both the kernel loading VM and VM organizing boot processes happen using the libexec logic. This removes the last reason for VM to still know much about exec() and vm/exec.c is gone. Further Implementation: . All segments are based at 0 and have a 4 GB limit. . The kernel is mapped in at the top of the virtual address space so as not to constrain the user processes. . Processes do not use segments from the LDT at all; there are no segments in the LDT any more, so no LLDT is needed. . The Minix segments T/D/S are gone and so none of the user-space or in-kernel copy functions use them. The copy functions use a process endpoint of NONE to realize it's a physical address, virtual otherwise. . The umap call only makes sense to translate a virtual address to a physical address now. . Segments-related calls like newmap and alloc_segments are gone. . All segments-related translation in VM is gone (vir2map etc). . Initialization in VM is simpler as no moving around is necessary. . VM and all other boot processes can be linked wherever they wish and will be mapped in at the right location by the kernel and VM respectively. Other changes: . The multiboot code is less special: it does not use mb_print for its diagnostics any more but uses printf() as normal, saving the output into the diagnostics buffer, only printing to the screen using the direct print functions if a panic() occurs. . The multiboot code uses the flexible 'free memory map list' style to receive the list of free memory if available. . The kernel determines the memory layout of the processes to a degree: it tells VM where the kernel starts and ends and where the kernel wants the top of the process to be. VM then uses this entire range, i.e. the stack is right at the top, and mmap()ped bits of memory are placed below that downwards, and the break grows upwards. Other Consequences: . Every process gets its own page table as address spaces can't be separated any more by segments. . As all segments are 0-based, there is no distinction between virtual and linear addresses, nor between userspace and kernel addresses. . Less work is done when context switching, leading to a net performance increase. (8% faster on my machine for 'make servers'.) . The layout and configuration of the GDT makes sysenter and syscall possible.
2012-05-07 16:03:35 +02:00
if (copy_msg_from_user(m_user, &msg) == 0) {
msg.m_source = caller->p_endpoint;
result = kernel_call_dispatch(caller, &msg);
}
else {
printf("WARNING wrong user pointer 0x%08x from process %s / %d\n",
m_user, caller->p_name, caller->p_endpoint);
cause_sig(proc_nr(caller), SIGSEGV);
return;
2005-04-21 16:53:53 +02:00
}
/* remember who invoked the kcall so we can bill it its time */
kbill_kcall = caller;
kernel_call_finish(caller, &msg, result);
2005-04-21 16:53:53 +02:00
}
/*===========================================================================*
2005-09-11 18:44:06 +02:00
* initialize *
2005-04-21 16:53:53 +02:00
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void system_init(void)
2005-04-21 16:53:53 +02:00
{
register struct priv *sp;
2005-04-21 16:53:53 +02:00
int i;
2005-05-02 16:30:04 +02:00
/* Initialize IRQ handler hooks. Mark all hooks available. */
for (i=0; i<NR_IRQ_HOOKS; i++) {
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
irq_hooks[i].proc_nr_e = NONE;
2005-05-02 16:30:04 +02:00
}
2005-04-21 16:53:53 +02:00
/* Initialize all alarm timers for all processes. */
for (sp=BEG_PRIV_ADDR; sp < END_PRIV_ADDR; sp++) {
tmr_inittimer(&(sp->s_alarm_timer));
2005-04-21 16:53:53 +02:00
}
2005-04-29 17:36:43 +02:00
/* Initialize the call vector to a safe default handler. Some system calls
* may be disabled or nonexistant. Then explicitly map known calls to their
2005-04-29 17:36:43 +02:00
* handler functions. This is done with a macro that gives a compile error
* if an illegal call number is used. The ordering is not important here.
*/
for (i=0; i<NR_SYS_CALLS; i++) {
call_vec[i] = NULL;
2005-04-29 17:36:43 +02:00
}
/* Process management. */
map(SYS_FORK, do_fork); /* a process forked a new process */
map(SYS_EXEC, do_exec); /* update process after execute */
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
map(SYS_CLEAR, do_clear); /* clean up after process exit */
map(SYS_EXIT, do_exit); /* a system process wants to exit */
map(SYS_PRIVCTL, do_privctl); /* system privileges control */
map(SYS_TRACE, do_trace); /* request a trace operation */
2006-06-23 17:35:05 +02:00
map(SYS_SETGRANT, do_setgrant); /* get/set own parameters */
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
map(SYS_RUNCTL, do_runctl); /* set/clear stop flag of a process */
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
map(SYS_UPDATE, do_update); /* update a process into another */
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
map(SYS_STATECTL, do_statectl); /* let a process control its state */
2005-04-29 17:36:43 +02:00
/* Signal handling. */
map(SYS_KILL, do_kill); /* cause a process to be signaled */
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
map(SYS_GETKSIG, do_getksig); /* signal manager checks for signals */
map(SYS_ENDKSIG, do_endksig); /* signal manager finished signal */
2005-04-29 17:36:43 +02:00
map(SYS_SIGSEND, do_sigsend); /* start POSIX-style signal */
map(SYS_SIGRETURN, do_sigreturn); /* return from POSIX-style signal */
/* Device I/O. */
map(SYS_IRQCTL, do_irqctl); /* interrupt control operations */
2012-10-08 03:38:03 +02:00
#if defined(__i386__)
2005-04-29 17:36:43 +02:00
map(SYS_DEVIO, do_devio); /* inb, inw, inl, outb, outw, outl */
map(SYS_VDEVIO, do_vdevio); /* vector with devio requests */
2012-10-08 03:38:03 +02:00
#endif
2005-04-29 17:36:43 +02:00
/* Memory management. */
map(SYS_MEMSET, do_memset); /* write char to memory area */
map(SYS_VMCTL, do_vmctl); /* various VM process settings */
2005-04-29 17:36:43 +02:00
/* Copying. */
map(SYS_UMAP, do_umap); /* map virtual to physical address */
map(SYS_UMAP_REMOTE, do_umap_remote); /* do_umap for non-caller process */
map(SYS_VUMAP, do_vumap); /* vectored virtual to physical map */
2005-05-02 16:30:04 +02:00
map(SYS_VIRCOPY, do_vircopy); /* use pure virtual addressing */
map(SYS_PHYSCOPY, do_copy); /* use physical addressing */
map(SYS_SAFECOPYFROM, do_safecopy_from);/* copy with pre-granted permission */
map(SYS_SAFECOPYTO, do_safecopy_to); /* copy with pre-granted permission */
map(SYS_VSAFECOPY, do_vsafecopy); /* vectored safecopy */
2012-09-22 22:01:05 +02:00
/* safe memset */
map(SYS_SAFEMEMSET, do_safememset); /* safememset */
/* Clock functionality. */
map(SYS_TIMES, do_times); /* get uptime and process times */
map(SYS_SETALARM, do_setalarm); /* schedule a synchronous alarm */
map(SYS_STIME, do_stime); /* set the boottime */
map(SYS_SETTIME, do_settime); /* set the system time (realtime) */
map(SYS_VTIMER, do_vtimer); /* set or retrieve a virtual timer */
/* System control. */
map(SYS_ABORT, do_abort); /* abort MINIX */
map(SYS_GETINFO, do_getinfo); /* request system information */
map(SYS_SYSCTL, do_sysctl); /* misc system manipulation */
/* Profiling. */
map(SYS_SPROF, do_sprofile); /* start/stop statistical profiling */
map(SYS_CPROF, do_cprofile); /* get/reset call profiling data */
map(SYS_PROFBUF, do_profbuf); /* announce locations to kernel */
Split of architecture-dependent and -independent functions for i386, mainly in the kernel and headers. This split based on work by Ingmar Alting <iaalting@cs.vu.nl> done for his Minix PowerPC architecture port. . kernel does not program the interrupt controller directly, do any other architecture-dependent operations, or contain assembly any more, but uses architecture-dependent functions in arch/$(ARCH)/. . architecture-dependent constants and types defined in arch/$(ARCH)/include. . <ibm/portio.h> moved to <minix/portio.h>, as they have become, for now, architecture-independent functions. . int86, sdevio, readbios, and iopenable are now i386-specific kernel calls and live in arch/i386/do_* now. . i386 arch now supports even less 86 code; e.g. mpx86.s and klib86.s have gone, and 'machine.protected' is gone (and always taken to be 1 in i386). If 86 support is to return, it should be a new architecture. . prototypes for the architecture-dependent functions defined in kernel/arch/$(ARCH)/*.c but used in kernel/ are in kernel/proto.h . /etc/make.conf included in makefiles and shell scripts that need to know the building architecture; it defines ARCH=<arch>, currently only i386. . some basic per-architecture build support outside of the kernel (lib) . in clock.c, only dequeue a process if it was ready . fixes for new include files files deleted: . mpx/klib.s - only for choosing between mpx/klib86 and -386 . klib86.s - only for 86 i386-specific files files moved (or arch-dependent stuff moved) to arch/i386/: . mpx386.s (entry point) . klib386.s . sconst.h . exception.c . protect.c . protect.h . i8269.c
2006-12-22 16:22:27 +01:00
/* arm-specific. */
#if defined(__arm__)
map(SYS_PADCONF, do_padconf); /* configure pinmux */
#endif
Split of architecture-dependent and -independent functions for i386, mainly in the kernel and headers. This split based on work by Ingmar Alting <iaalting@cs.vu.nl> done for his Minix PowerPC architecture port. . kernel does not program the interrupt controller directly, do any other architecture-dependent operations, or contain assembly any more, but uses architecture-dependent functions in arch/$(ARCH)/. . architecture-dependent constants and types defined in arch/$(ARCH)/include. . <ibm/portio.h> moved to <minix/portio.h>, as they have become, for now, architecture-independent functions. . int86, sdevio, readbios, and iopenable are now i386-specific kernel calls and live in arch/i386/do_* now. . i386 arch now supports even less 86 code; e.g. mpx86.s and klib86.s have gone, and 'machine.protected' is gone (and always taken to be 1 in i386). If 86 support is to return, it should be a new architecture. . prototypes for the architecture-dependent functions defined in kernel/arch/$(ARCH)/*.c but used in kernel/ are in kernel/proto.h . /etc/make.conf included in makefiles and shell scripts that need to know the building architecture; it defines ARCH=<arch>, currently only i386. . some basic per-architecture build support outside of the kernel (lib) . in clock.c, only dequeue a process if it was ready . fixes for new include files files deleted: . mpx/klib.s - only for choosing between mpx/klib86 and -386 . klib86.s - only for 86 i386-specific files files moved (or arch-dependent stuff moved) to arch/i386/: . mpx386.s (entry point) . klib386.s . sconst.h . exception.c . protect.c . protect.h . i8269.c
2006-12-22 16:22:27 +01:00
/* i386-specific. */
#if defined(__i386__)
Split of architecture-dependent and -independent functions for i386, mainly in the kernel and headers. This split based on work by Ingmar Alting <iaalting@cs.vu.nl> done for his Minix PowerPC architecture port. . kernel does not program the interrupt controller directly, do any other architecture-dependent operations, or contain assembly any more, but uses architecture-dependent functions in arch/$(ARCH)/. . architecture-dependent constants and types defined in arch/$(ARCH)/include. . <ibm/portio.h> moved to <minix/portio.h>, as they have become, for now, architecture-independent functions. . int86, sdevio, readbios, and iopenable are now i386-specific kernel calls and live in arch/i386/do_* now. . i386 arch now supports even less 86 code; e.g. mpx86.s and klib86.s have gone, and 'machine.protected' is gone (and always taken to be 1 in i386). If 86 support is to return, it should be a new architecture. . prototypes for the architecture-dependent functions defined in kernel/arch/$(ARCH)/*.c but used in kernel/ are in kernel/proto.h . /etc/make.conf included in makefiles and shell scripts that need to know the building architecture; it defines ARCH=<arch>, currently only i386. . some basic per-architecture build support outside of the kernel (lib) . in clock.c, only dequeue a process if it was ready . fixes for new include files files deleted: . mpx/klib.s - only for choosing between mpx/klib86 and -386 . klib86.s - only for 86 i386-specific files files moved (or arch-dependent stuff moved) to arch/i386/: . mpx386.s (entry point) . klib386.s . sconst.h . exception.c . protect.c . protect.h . i8269.c
2006-12-22 16:22:27 +01:00
map(SYS_READBIOS, do_readbios); /* read from BIOS locations */
map(SYS_IOPENABLE, do_iopenable); /* Enable I/O */
map(SYS_SDEVIO, do_sdevio); /* phys_insb, _insw, _outsb, _outsw */
2012-10-08 03:38:03 +02:00
#endif
/* Machine state switching. */
map(SYS_SETMCONTEXT, do_setmcontext); /* set machine context */
map(SYS_GETMCONTEXT, do_getmcontext); /* get machine context */
2005-04-21 16:53:53 +02:00
Userspace scheduling - cotributed by Bjorn Swift - In this first phase, scheduling is moved from the kernel to the PM server. The next steps are to a) moving scheduling to its own server and b) include useful information in the "out of quantum" message, so that the scheduler can make use of this information. - The kernel process table now keeps record of who is responsible for scheduling each process (p_scheduler). When this pointer is NULL, the process will be scheduled by the kernel. If such a process runs out of quantum, the kernel will simply renew its quantum an requeue it. - When PM loads, it will take over scheduling of all running processes, except system processes, using sys_schedctl(). Essentially, this only results in taking over init. As children inherit a scheduler from their parent, user space programs forked by init will inherit PM (for now) as their scheduler. - Once a process has been assigned a scheduler, and runs out of quantum, its RTS_NO_QUANTUM flag will be set and the process dequeued. The kernel will send a message to the scheduler, on the process' behalf, informing the scheduler that it has run out of quantum. The scheduler can take what ever action it pleases, based on its policy, and then reschedule the process using the sys_schedule() system call. - Balance queues does not work as before. While the old in-kernel function used to renew the quantum of processes in the highest priority run queue, the user-space implementation only acts on processes that have been bumped down to a lower priority queue. This approach reacts slower to changes than the old one, but saves us sending a sys_schedule message for each process every time we balance the queues. Currently, when processes are moved up a priority queue, their quantum is also renewed, but this can be fiddled with. - do_nice has been removed from kernel. PM answers to get- and setpriority calls, updates it's own nice variable as well as the max_run_queue. This will be refactored once scheduling is moved to a separate server. We will probably have PM update it's local nice value and then send a message to whoever is scheduling the process. - changes to fix an issue in do_fork() where processes could run out of quantum but bypassing the code path that handles it correctly. The future plan is to remove the policy from do_fork() and implement it in userspace too.
2010-03-29 13:07:20 +02:00
/* Scheduling */
map(SYS_SCHEDULE, do_schedule); /* reschedule a process */
map(SYS_SCHEDCTL, do_schedctl); /* change process scheduler */
}
/*===========================================================================*
2005-09-11 18:44:06 +02:00
* get_priv *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
int get_priv(rc, priv_id)
register struct proc *rc; /* new (child) process pointer */
Rewrite of boot process KERNEL CHANGES: - The kernel only knows about privileges of kernel tasks and the root system process (now RS). - Kernel tasks and the root system process are the only processes that are made schedulable by the kernel at startup. All the other processes in the boot image don't get their privileges set at startup and are inhibited from running by the RTS_NO_PRIV flag. - Removed the assumption on the ordering of processes in the boot image table. System processes can now appear in any order in the boot image table. - Privilege ids can now be assigned both statically or dynamically. The kernel assigns static privilege ids to kernel tasks and the root system process. Each id is directly derived from the process number. - User processes now all share the static privilege id of the root user process (now INIT). - sys_privctl split: we have more calls now to let RS set privileges for system processes. SYS_PRIV_ALLOW / SYS_PRIV_DISALLOW are only used to flip the RTS_NO_PRIV flag and allow / disallow a process from running. SYS_PRIV_SET_SYS / SYS_PRIV_SET_USER are used to set privileges for a system / user process. - boot image table flags split: PROC_FULLVM is the only flag that has been moved out of the privilege flags and is still maintained in the boot image table. All the other privilege flags are out of the kernel now. RS CHANGES: - RS is the only user-space process who gets to run right after in-kernel startup. - RS uses the boot image table from the kernel and three additional boot image info table (priv table, sys table, dev table) to complete the initialization of the system. - RS checks that the entries in the priv table match the entries in the boot image table to make sure that every process in the boot image gets schedulable. - RS only uses static privilege ids to set privileges for system services in the boot image. - RS includes basic memory management support to allocate the boot image buffer dynamically during initialization. The buffer shall contain the executable image of all the system services we would like to restart after a crash. - First step towards decoupling between resource provisioning and resource requirements in RS: RS must know what resources it needs to restart a process and what resources it has currently available. This is useful to tradeoff reliability and resource consumption. When required resources are missing, the process cannot be restarted. In that case, in the future, a system flag will tell RS what to do. For example, if CORE_PROC is set, RS should trigger a system-wide panic because the system can no longer function correctly without a core system process. PM CHANGES: - The process tree built at initialization time is changed to have INIT as root with pid 0, RS child of INIT and all the system services children of RS. This is required to make RS in control of all the system services. - PM no longer registers labels for system services in the boot image. This is now part of RS's initialization process.
2009-12-11 01:08:19 +01:00
int priv_id; /* privilege id */
{
Rewrite of boot process KERNEL CHANGES: - The kernel only knows about privileges of kernel tasks and the root system process (now RS). - Kernel tasks and the root system process are the only processes that are made schedulable by the kernel at startup. All the other processes in the boot image don't get their privileges set at startup and are inhibited from running by the RTS_NO_PRIV flag. - Removed the assumption on the ordering of processes in the boot image table. System processes can now appear in any order in the boot image table. - Privilege ids can now be assigned both statically or dynamically. The kernel assigns static privilege ids to kernel tasks and the root system process. Each id is directly derived from the process number. - User processes now all share the static privilege id of the root user process (now INIT). - sys_privctl split: we have more calls now to let RS set privileges for system processes. SYS_PRIV_ALLOW / SYS_PRIV_DISALLOW are only used to flip the RTS_NO_PRIV flag and allow / disallow a process from running. SYS_PRIV_SET_SYS / SYS_PRIV_SET_USER are used to set privileges for a system / user process. - boot image table flags split: PROC_FULLVM is the only flag that has been moved out of the privilege flags and is still maintained in the boot image table. All the other privilege flags are out of the kernel now. RS CHANGES: - RS is the only user-space process who gets to run right after in-kernel startup. - RS uses the boot image table from the kernel and three additional boot image info table (priv table, sys table, dev table) to complete the initialization of the system. - RS checks that the entries in the priv table match the entries in the boot image table to make sure that every process in the boot image gets schedulable. - RS only uses static privilege ids to set privileges for system services in the boot image. - RS includes basic memory management support to allocate the boot image buffer dynamically during initialization. The buffer shall contain the executable image of all the system services we would like to restart after a crash. - First step towards decoupling between resource provisioning and resource requirements in RS: RS must know what resources it needs to restart a process and what resources it has currently available. This is useful to tradeoff reliability and resource consumption. When required resources are missing, the process cannot be restarted. In that case, in the future, a system flag will tell RS what to do. For example, if CORE_PROC is set, RS should trigger a system-wide panic because the system can no longer function correctly without a core system process. PM CHANGES: - The process tree built at initialization time is changed to have INIT as root with pid 0, RS child of INIT and all the system services children of RS. This is required to make RS in control of all the system services. - PM no longer registers labels for system services in the boot image. This is now part of RS's initialization process.
2009-12-11 01:08:19 +01:00
/* Allocate a new privilege structure for a system process. Privilege ids
* can be assigned either statically or dynamically.
*/
Rewrite of boot process KERNEL CHANGES: - The kernel only knows about privileges of kernel tasks and the root system process (now RS). - Kernel tasks and the root system process are the only processes that are made schedulable by the kernel at startup. All the other processes in the boot image don't get their privileges set at startup and are inhibited from running by the RTS_NO_PRIV flag. - Removed the assumption on the ordering of processes in the boot image table. System processes can now appear in any order in the boot image table. - Privilege ids can now be assigned both statically or dynamically. The kernel assigns static privilege ids to kernel tasks and the root system process. Each id is directly derived from the process number. - User processes now all share the static privilege id of the root user process (now INIT). - sys_privctl split: we have more calls now to let RS set privileges for system processes. SYS_PRIV_ALLOW / SYS_PRIV_DISALLOW are only used to flip the RTS_NO_PRIV flag and allow / disallow a process from running. SYS_PRIV_SET_SYS / SYS_PRIV_SET_USER are used to set privileges for a system / user process. - boot image table flags split: PROC_FULLVM is the only flag that has been moved out of the privilege flags and is still maintained in the boot image table. All the other privilege flags are out of the kernel now. RS CHANGES: - RS is the only user-space process who gets to run right after in-kernel startup. - RS uses the boot image table from the kernel and three additional boot image info table (priv table, sys table, dev table) to complete the initialization of the system. - RS checks that the entries in the priv table match the entries in the boot image table to make sure that every process in the boot image gets schedulable. - RS only uses static privilege ids to set privileges for system services in the boot image. - RS includes basic memory management support to allocate the boot image buffer dynamically during initialization. The buffer shall contain the executable image of all the system services we would like to restart after a crash. - First step towards decoupling between resource provisioning and resource requirements in RS: RS must know what resources it needs to restart a process and what resources it has currently available. This is useful to tradeoff reliability and resource consumption. When required resources are missing, the process cannot be restarted. In that case, in the future, a system flag will tell RS what to do. For example, if CORE_PROC is set, RS should trigger a system-wide panic because the system can no longer function correctly without a core system process. PM CHANGES: - The process tree built at initialization time is changed to have INIT as root with pid 0, RS child of INIT and all the system services children of RS. This is required to make RS in control of all the system services. - PM no longer registers labels for system services in the boot image. This is now part of RS's initialization process.
2009-12-11 01:08:19 +01:00
register struct priv *sp; /* privilege structure */
if(priv_id == NULL_PRIV_ID) { /* allocate slot dynamically */
for (sp = BEG_DYN_PRIV_ADDR; sp < END_DYN_PRIV_ADDR; ++sp)
if (sp->s_proc_nr == NONE) break;
if (sp >= END_DYN_PRIV_ADDR) return(ENOSPC);
}
else { /* allocate slot from id */
if(!is_static_priv_id(priv_id)) {
return EINVAL; /* invalid static priv id */
}
if(priv[priv_id].s_proc_nr != NONE) {
return EBUSY; /* slot already in use */
}
sp = &priv[priv_id];
}
Rewrite of boot process KERNEL CHANGES: - The kernel only knows about privileges of kernel tasks and the root system process (now RS). - Kernel tasks and the root system process are the only processes that are made schedulable by the kernel at startup. All the other processes in the boot image don't get their privileges set at startup and are inhibited from running by the RTS_NO_PRIV flag. - Removed the assumption on the ordering of processes in the boot image table. System processes can now appear in any order in the boot image table. - Privilege ids can now be assigned both statically or dynamically. The kernel assigns static privilege ids to kernel tasks and the root system process. Each id is directly derived from the process number. - User processes now all share the static privilege id of the root user process (now INIT). - sys_privctl split: we have more calls now to let RS set privileges for system processes. SYS_PRIV_ALLOW / SYS_PRIV_DISALLOW are only used to flip the RTS_NO_PRIV flag and allow / disallow a process from running. SYS_PRIV_SET_SYS / SYS_PRIV_SET_USER are used to set privileges for a system / user process. - boot image table flags split: PROC_FULLVM is the only flag that has been moved out of the privilege flags and is still maintained in the boot image table. All the other privilege flags are out of the kernel now. RS CHANGES: - RS is the only user-space process who gets to run right after in-kernel startup. - RS uses the boot image table from the kernel and three additional boot image info table (priv table, sys table, dev table) to complete the initialization of the system. - RS checks that the entries in the priv table match the entries in the boot image table to make sure that every process in the boot image gets schedulable. - RS only uses static privilege ids to set privileges for system services in the boot image. - RS includes basic memory management support to allocate the boot image buffer dynamically during initialization. The buffer shall contain the executable image of all the system services we would like to restart after a crash. - First step towards decoupling between resource provisioning and resource requirements in RS: RS must know what resources it needs to restart a process and what resources it has currently available. This is useful to tradeoff reliability and resource consumption. When required resources are missing, the process cannot be restarted. In that case, in the future, a system flag will tell RS what to do. For example, if CORE_PROC is set, RS should trigger a system-wide panic because the system can no longer function correctly without a core system process. PM CHANGES: - The process tree built at initialization time is changed to have INIT as root with pid 0, RS child of INIT and all the system services children of RS. This is required to make RS in control of all the system services. - PM no longer registers labels for system services in the boot image. This is now part of RS's initialization process.
2009-12-11 01:08:19 +01:00
rc->p_priv = sp; /* assign new slot */
rc->p_priv->s_proc_nr = proc_nr(rc); /* set association */
return(OK);
2005-04-21 16:53:53 +02:00
}
IPC privileges fixes Kernel: o Remove s_ipc_sendrec, instead using s_ipc_to for all send primitives o Centralize s_ipc_to bit manipulation, - disallowing assignment of bits pointing to unused priv structs; - preventing send-to-self by not setting bit for own priv struct; - preserving send mask matrix symmetry in all cases o Add IPC send mask checks to SENDA, which were missing entirely somehow o Slightly improve IPC stats accounting for SENDA o Remove SYSTEM from user processes' send mask o Half-fix the dependency between boot image order and process numbers, - correcting the table order of the boot processes; - documenting the order requirement needed for proper send masks; - warning at boot time if the order is violated RS: o Add support in /etc/drivers.conf for servers that talk to user processes, - disallowing IPC to user processes if no "ipc" field is present - adding a special "USER" label to explicitly allow IPC to user processes o Always apply IPC masks when specified; remove -i flag from service(8) o Use kernel send mask symmetry to delay adding IPC permissions for labels that do not exist yet, adding them to that label's process upon creation o Add VM to ipc permissions list for rtl8139 and fxp in drivers.conf Left to future fixes: o Removal of the table order vs process numbers dependency altogether, possibly using per-process send list structures as used for SYSTEM calls o Proper assignment of send masks to boot processes; some of the assigned (~0) masks are much wider than necessary o Proper assignment of IPC send masks for many more servers in drivers.conf o Removal of the debugging warning about the now legitimate case where RS's add_forward_ipc cannot find the IPC destination's label yet
2009-07-02 18:25:31 +02:00
/*===========================================================================*
* set_sendto_bit *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void set_sendto_bit(const struct proc *rp, int id)
IPC privileges fixes Kernel: o Remove s_ipc_sendrec, instead using s_ipc_to for all send primitives o Centralize s_ipc_to bit manipulation, - disallowing assignment of bits pointing to unused priv structs; - preventing send-to-self by not setting bit for own priv struct; - preserving send mask matrix symmetry in all cases o Add IPC send mask checks to SENDA, which were missing entirely somehow o Slightly improve IPC stats accounting for SENDA o Remove SYSTEM from user processes' send mask o Half-fix the dependency between boot image order and process numbers, - correcting the table order of the boot processes; - documenting the order requirement needed for proper send masks; - warning at boot time if the order is violated RS: o Add support in /etc/drivers.conf for servers that talk to user processes, - disallowing IPC to user processes if no "ipc" field is present - adding a special "USER" label to explicitly allow IPC to user processes o Always apply IPC masks when specified; remove -i flag from service(8) o Use kernel send mask symmetry to delay adding IPC permissions for labels that do not exist yet, adding them to that label's process upon creation o Add VM to ipc permissions list for rtl8139 and fxp in drivers.conf Left to future fixes: o Removal of the table order vs process numbers dependency altogether, possibly using per-process send list structures as used for SYSTEM calls o Proper assignment of send masks to boot processes; some of the assigned (~0) masks are much wider than necessary o Proper assignment of IPC send masks for many more servers in drivers.conf o Removal of the debugging warning about the now legitimate case where RS's add_forward_ipc cannot find the IPC destination's label yet
2009-07-02 18:25:31 +02:00
{
/* Allow a process to send messages to the process(es) associated with the
* system privilege structure with the given ID.
*/
Rewrite of boot process KERNEL CHANGES: - The kernel only knows about privileges of kernel tasks and the root system process (now RS). - Kernel tasks and the root system process are the only processes that are made schedulable by the kernel at startup. All the other processes in the boot image don't get their privileges set at startup and are inhibited from running by the RTS_NO_PRIV flag. - Removed the assumption on the ordering of processes in the boot image table. System processes can now appear in any order in the boot image table. - Privilege ids can now be assigned both statically or dynamically. The kernel assigns static privilege ids to kernel tasks and the root system process. Each id is directly derived from the process number. - User processes now all share the static privilege id of the root user process (now INIT). - sys_privctl split: we have more calls now to let RS set privileges for system processes. SYS_PRIV_ALLOW / SYS_PRIV_DISALLOW are only used to flip the RTS_NO_PRIV flag and allow / disallow a process from running. SYS_PRIV_SET_SYS / SYS_PRIV_SET_USER are used to set privileges for a system / user process. - boot image table flags split: PROC_FULLVM is the only flag that has been moved out of the privilege flags and is still maintained in the boot image table. All the other privilege flags are out of the kernel now. RS CHANGES: - RS is the only user-space process who gets to run right after in-kernel startup. - RS uses the boot image table from the kernel and three additional boot image info table (priv table, sys table, dev table) to complete the initialization of the system. - RS checks that the entries in the priv table match the entries in the boot image table to make sure that every process in the boot image gets schedulable. - RS only uses static privilege ids to set privileges for system services in the boot image. - RS includes basic memory management support to allocate the boot image buffer dynamically during initialization. The buffer shall contain the executable image of all the system services we would like to restart after a crash. - First step towards decoupling between resource provisioning and resource requirements in RS: RS must know what resources it needs to restart a process and what resources it has currently available. This is useful to tradeoff reliability and resource consumption. When required resources are missing, the process cannot be restarted. In that case, in the future, a system flag will tell RS what to do. For example, if CORE_PROC is set, RS should trigger a system-wide panic because the system can no longer function correctly without a core system process. PM CHANGES: - The process tree built at initialization time is changed to have INIT as root with pid 0, RS child of INIT and all the system services children of RS. This is required to make RS in control of all the system services. - PM no longer registers labels for system services in the boot image. This is now part of RS's initialization process.
2009-12-11 01:08:19 +01:00
/* Disallow the process from sending to a process privilege structure with no
IPC privileges fixes Kernel: o Remove s_ipc_sendrec, instead using s_ipc_to for all send primitives o Centralize s_ipc_to bit manipulation, - disallowing assignment of bits pointing to unused priv structs; - preventing send-to-self by not setting bit for own priv struct; - preserving send mask matrix symmetry in all cases o Add IPC send mask checks to SENDA, which were missing entirely somehow o Slightly improve IPC stats accounting for SENDA o Remove SYSTEM from user processes' send mask o Half-fix the dependency between boot image order and process numbers, - correcting the table order of the boot processes; - documenting the order requirement needed for proper send masks; - warning at boot time if the order is violated RS: o Add support in /etc/drivers.conf for servers that talk to user processes, - disallowing IPC to user processes if no "ipc" field is present - adding a special "USER" label to explicitly allow IPC to user processes o Always apply IPC masks when specified; remove -i flag from service(8) o Use kernel send mask symmetry to delay adding IPC permissions for labels that do not exist yet, adding them to that label's process upon creation o Add VM to ipc permissions list for rtl8139 and fxp in drivers.conf Left to future fixes: o Removal of the table order vs process numbers dependency altogether, possibly using per-process send list structures as used for SYSTEM calls o Proper assignment of send masks to boot processes; some of the assigned (~0) masks are much wider than necessary o Proper assignment of IPC send masks for many more servers in drivers.conf o Removal of the debugging warning about the now legitimate case where RS's add_forward_ipc cannot find the IPC destination's label yet
2009-07-02 18:25:31 +02:00
* associated process, and disallow the process from sending to itself.
*/
Rewrite of boot process KERNEL CHANGES: - The kernel only knows about privileges of kernel tasks and the root system process (now RS). - Kernel tasks and the root system process are the only processes that are made schedulable by the kernel at startup. All the other processes in the boot image don't get their privileges set at startup and are inhibited from running by the RTS_NO_PRIV flag. - Removed the assumption on the ordering of processes in the boot image table. System processes can now appear in any order in the boot image table. - Privilege ids can now be assigned both statically or dynamically. The kernel assigns static privilege ids to kernel tasks and the root system process. Each id is directly derived from the process number. - User processes now all share the static privilege id of the root user process (now INIT). - sys_privctl split: we have more calls now to let RS set privileges for system processes. SYS_PRIV_ALLOW / SYS_PRIV_DISALLOW are only used to flip the RTS_NO_PRIV flag and allow / disallow a process from running. SYS_PRIV_SET_SYS / SYS_PRIV_SET_USER are used to set privileges for a system / user process. - boot image table flags split: PROC_FULLVM is the only flag that has been moved out of the privilege flags and is still maintained in the boot image table. All the other privilege flags are out of the kernel now. RS CHANGES: - RS is the only user-space process who gets to run right after in-kernel startup. - RS uses the boot image table from the kernel and three additional boot image info table (priv table, sys table, dev table) to complete the initialization of the system. - RS checks that the entries in the priv table match the entries in the boot image table to make sure that every process in the boot image gets schedulable. - RS only uses static privilege ids to set privileges for system services in the boot image. - RS includes basic memory management support to allocate the boot image buffer dynamically during initialization. The buffer shall contain the executable image of all the system services we would like to restart after a crash. - First step towards decoupling between resource provisioning and resource requirements in RS: RS must know what resources it needs to restart a process and what resources it has currently available. This is useful to tradeoff reliability and resource consumption. When required resources are missing, the process cannot be restarted. In that case, in the future, a system flag will tell RS what to do. For example, if CORE_PROC is set, RS should trigger a system-wide panic because the system can no longer function correctly without a core system process. PM CHANGES: - The process tree built at initialization time is changed to have INIT as root with pid 0, RS child of INIT and all the system services children of RS. This is required to make RS in control of all the system services. - PM no longer registers labels for system services in the boot image. This is now part of RS's initialization process.
2009-12-11 01:08:19 +01:00
if (id_to_nr(id) == NONE || priv_id(rp) == id) {
unset_sys_bit(priv(rp)->s_ipc_to, id);
IPC privileges fixes Kernel: o Remove s_ipc_sendrec, instead using s_ipc_to for all send primitives o Centralize s_ipc_to bit manipulation, - disallowing assignment of bits pointing to unused priv structs; - preventing send-to-self by not setting bit for own priv struct; - preserving send mask matrix symmetry in all cases o Add IPC send mask checks to SENDA, which were missing entirely somehow o Slightly improve IPC stats accounting for SENDA o Remove SYSTEM from user processes' send mask o Half-fix the dependency between boot image order and process numbers, - correcting the table order of the boot processes; - documenting the order requirement needed for proper send masks; - warning at boot time if the order is violated RS: o Add support in /etc/drivers.conf for servers that talk to user processes, - disallowing IPC to user processes if no "ipc" field is present - adding a special "USER" label to explicitly allow IPC to user processes o Always apply IPC masks when specified; remove -i flag from service(8) o Use kernel send mask symmetry to delay adding IPC permissions for labels that do not exist yet, adding them to that label's process upon creation o Add VM to ipc permissions list for rtl8139 and fxp in drivers.conf Left to future fixes: o Removal of the table order vs process numbers dependency altogether, possibly using per-process send list structures as used for SYSTEM calls o Proper assignment of send masks to boot processes; some of the assigned (~0) masks are much wider than necessary o Proper assignment of IPC send masks for many more servers in drivers.conf o Removal of the debugging warning about the now legitimate case where RS's add_forward_ipc cannot find the IPC destination's label yet
2009-07-02 18:25:31 +02:00
return;
Rewrite of boot process KERNEL CHANGES: - The kernel only knows about privileges of kernel tasks and the root system process (now RS). - Kernel tasks and the root system process are the only processes that are made schedulable by the kernel at startup. All the other processes in the boot image don't get their privileges set at startup and are inhibited from running by the RTS_NO_PRIV flag. - Removed the assumption on the ordering of processes in the boot image table. System processes can now appear in any order in the boot image table. - Privilege ids can now be assigned both statically or dynamically. The kernel assigns static privilege ids to kernel tasks and the root system process. Each id is directly derived from the process number. - User processes now all share the static privilege id of the root user process (now INIT). - sys_privctl split: we have more calls now to let RS set privileges for system processes. SYS_PRIV_ALLOW / SYS_PRIV_DISALLOW are only used to flip the RTS_NO_PRIV flag and allow / disallow a process from running. SYS_PRIV_SET_SYS / SYS_PRIV_SET_USER are used to set privileges for a system / user process. - boot image table flags split: PROC_FULLVM is the only flag that has been moved out of the privilege flags and is still maintained in the boot image table. All the other privilege flags are out of the kernel now. RS CHANGES: - RS is the only user-space process who gets to run right after in-kernel startup. - RS uses the boot image table from the kernel and three additional boot image info table (priv table, sys table, dev table) to complete the initialization of the system. - RS checks that the entries in the priv table match the entries in the boot image table to make sure that every process in the boot image gets schedulable. - RS only uses static privilege ids to set privileges for system services in the boot image. - RS includes basic memory management support to allocate the boot image buffer dynamically during initialization. The buffer shall contain the executable image of all the system services we would like to restart after a crash. - First step towards decoupling between resource provisioning and resource requirements in RS: RS must know what resources it needs to restart a process and what resources it has currently available. This is useful to tradeoff reliability and resource consumption. When required resources are missing, the process cannot be restarted. In that case, in the future, a system flag will tell RS what to do. For example, if CORE_PROC is set, RS should trigger a system-wide panic because the system can no longer function correctly without a core system process. PM CHANGES: - The process tree built at initialization time is changed to have INIT as root with pid 0, RS child of INIT and all the system services children of RS. This is required to make RS in control of all the system services. - PM no longer registers labels for system services in the boot image. This is now part of RS's initialization process.
2009-12-11 01:08:19 +01:00
}
IPC privileges fixes Kernel: o Remove s_ipc_sendrec, instead using s_ipc_to for all send primitives o Centralize s_ipc_to bit manipulation, - disallowing assignment of bits pointing to unused priv structs; - preventing send-to-self by not setting bit for own priv struct; - preserving send mask matrix symmetry in all cases o Add IPC send mask checks to SENDA, which were missing entirely somehow o Slightly improve IPC stats accounting for SENDA o Remove SYSTEM from user processes' send mask o Half-fix the dependency between boot image order and process numbers, - correcting the table order of the boot processes; - documenting the order requirement needed for proper send masks; - warning at boot time if the order is violated RS: o Add support in /etc/drivers.conf for servers that talk to user processes, - disallowing IPC to user processes if no "ipc" field is present - adding a special "USER" label to explicitly allow IPC to user processes o Always apply IPC masks when specified; remove -i flag from service(8) o Use kernel send mask symmetry to delay adding IPC permissions for labels that do not exist yet, adding them to that label's process upon creation o Add VM to ipc permissions list for rtl8139 and fxp in drivers.conf Left to future fixes: o Removal of the table order vs process numbers dependency altogether, possibly using per-process send list structures as used for SYSTEM calls o Proper assignment of send masks to boot processes; some of the assigned (~0) masks are much wider than necessary o Proper assignment of IPC send masks for many more servers in drivers.conf o Removal of the debugging warning about the now legitimate case where RS's add_forward_ipc cannot find the IPC destination's label yet
2009-07-02 18:25:31 +02:00
set_sys_bit(priv(rp)->s_ipc_to, id);
Rewrite of boot process KERNEL CHANGES: - The kernel only knows about privileges of kernel tasks and the root system process (now RS). - Kernel tasks and the root system process are the only processes that are made schedulable by the kernel at startup. All the other processes in the boot image don't get their privileges set at startup and are inhibited from running by the RTS_NO_PRIV flag. - Removed the assumption on the ordering of processes in the boot image table. System processes can now appear in any order in the boot image table. - Privilege ids can now be assigned both statically or dynamically. The kernel assigns static privilege ids to kernel tasks and the root system process. Each id is directly derived from the process number. - User processes now all share the static privilege id of the root user process (now INIT). - sys_privctl split: we have more calls now to let RS set privileges for system processes. SYS_PRIV_ALLOW / SYS_PRIV_DISALLOW are only used to flip the RTS_NO_PRIV flag and allow / disallow a process from running. SYS_PRIV_SET_SYS / SYS_PRIV_SET_USER are used to set privileges for a system / user process. - boot image table flags split: PROC_FULLVM is the only flag that has been moved out of the privilege flags and is still maintained in the boot image table. All the other privilege flags are out of the kernel now. RS CHANGES: - RS is the only user-space process who gets to run right after in-kernel startup. - RS uses the boot image table from the kernel and three additional boot image info table (priv table, sys table, dev table) to complete the initialization of the system. - RS checks that the entries in the priv table match the entries in the boot image table to make sure that every process in the boot image gets schedulable. - RS only uses static privilege ids to set privileges for system services in the boot image. - RS includes basic memory management support to allocate the boot image buffer dynamically during initialization. The buffer shall contain the executable image of all the system services we would like to restart after a crash. - First step towards decoupling between resource provisioning and resource requirements in RS: RS must know what resources it needs to restart a process and what resources it has currently available. This is useful to tradeoff reliability and resource consumption. When required resources are missing, the process cannot be restarted. In that case, in the future, a system flag will tell RS what to do. For example, if CORE_PROC is set, RS should trigger a system-wide panic because the system can no longer function correctly without a core system process. PM CHANGES: - The process tree built at initialization time is changed to have INIT as root with pid 0, RS child of INIT and all the system services children of RS. This is required to make RS in control of all the system services. - PM no longer registers labels for system services in the boot image. This is now part of RS's initialization process.
2009-12-11 01:08:19 +01:00
/* The process that this process can now send to, must be able to reply (or
* vice versa). Therefore, its send mask should be updated as well. Ignore
* receivers that don't support traps other than RECEIVE, they can't reply
* or send messages anyway.
IPC privileges fixes Kernel: o Remove s_ipc_sendrec, instead using s_ipc_to for all send primitives o Centralize s_ipc_to bit manipulation, - disallowing assignment of bits pointing to unused priv structs; - preventing send-to-self by not setting bit for own priv struct; - preserving send mask matrix symmetry in all cases o Add IPC send mask checks to SENDA, which were missing entirely somehow o Slightly improve IPC stats accounting for SENDA o Remove SYSTEM from user processes' send mask o Half-fix the dependency between boot image order and process numbers, - correcting the table order of the boot processes; - documenting the order requirement needed for proper send masks; - warning at boot time if the order is violated RS: o Add support in /etc/drivers.conf for servers that talk to user processes, - disallowing IPC to user processes if no "ipc" field is present - adding a special "USER" label to explicitly allow IPC to user processes o Always apply IPC masks when specified; remove -i flag from service(8) o Use kernel send mask symmetry to delay adding IPC permissions for labels that do not exist yet, adding them to that label's process upon creation o Add VM to ipc permissions list for rtl8139 and fxp in drivers.conf Left to future fixes: o Removal of the table order vs process numbers dependency altogether, possibly using per-process send list structures as used for SYSTEM calls o Proper assignment of send masks to boot processes; some of the assigned (~0) masks are much wider than necessary o Proper assignment of IPC send masks for many more servers in drivers.conf o Removal of the debugging warning about the now legitimate case where RS's add_forward_ipc cannot find the IPC destination's label yet
2009-07-02 18:25:31 +02:00
*/
Rewrite of boot process KERNEL CHANGES: - The kernel only knows about privileges of kernel tasks and the root system process (now RS). - Kernel tasks and the root system process are the only processes that are made schedulable by the kernel at startup. All the other processes in the boot image don't get their privileges set at startup and are inhibited from running by the RTS_NO_PRIV flag. - Removed the assumption on the ordering of processes in the boot image table. System processes can now appear in any order in the boot image table. - Privilege ids can now be assigned both statically or dynamically. The kernel assigns static privilege ids to kernel tasks and the root system process. Each id is directly derived from the process number. - User processes now all share the static privilege id of the root user process (now INIT). - sys_privctl split: we have more calls now to let RS set privileges for system processes. SYS_PRIV_ALLOW / SYS_PRIV_DISALLOW are only used to flip the RTS_NO_PRIV flag and allow / disallow a process from running. SYS_PRIV_SET_SYS / SYS_PRIV_SET_USER are used to set privileges for a system / user process. - boot image table flags split: PROC_FULLVM is the only flag that has been moved out of the privilege flags and is still maintained in the boot image table. All the other privilege flags are out of the kernel now. RS CHANGES: - RS is the only user-space process who gets to run right after in-kernel startup. - RS uses the boot image table from the kernel and three additional boot image info table (priv table, sys table, dev table) to complete the initialization of the system. - RS checks that the entries in the priv table match the entries in the boot image table to make sure that every process in the boot image gets schedulable. - RS only uses static privilege ids to set privileges for system services in the boot image. - RS includes basic memory management support to allocate the boot image buffer dynamically during initialization. The buffer shall contain the executable image of all the system services we would like to restart after a crash. - First step towards decoupling between resource provisioning and resource requirements in RS: RS must know what resources it needs to restart a process and what resources it has currently available. This is useful to tradeoff reliability and resource consumption. When required resources are missing, the process cannot be restarted. In that case, in the future, a system flag will tell RS what to do. For example, if CORE_PROC is set, RS should trigger a system-wide panic because the system can no longer function correctly without a core system process. PM CHANGES: - The process tree built at initialization time is changed to have INIT as root with pid 0, RS child of INIT and all the system services children of RS. This is required to make RS in control of all the system services. - PM no longer registers labels for system services in the boot image. This is now part of RS's initialization process.
2009-12-11 01:08:19 +01:00
if (priv_addr(id)->s_trap_mask & ~((1 << RECEIVE)))
set_sys_bit(priv_addr(id)->s_ipc_to, priv_id(rp));
IPC privileges fixes Kernel: o Remove s_ipc_sendrec, instead using s_ipc_to for all send primitives o Centralize s_ipc_to bit manipulation, - disallowing assignment of bits pointing to unused priv structs; - preventing send-to-self by not setting bit for own priv struct; - preserving send mask matrix symmetry in all cases o Add IPC send mask checks to SENDA, which were missing entirely somehow o Slightly improve IPC stats accounting for SENDA o Remove SYSTEM from user processes' send mask o Half-fix the dependency between boot image order and process numbers, - correcting the table order of the boot processes; - documenting the order requirement needed for proper send masks; - warning at boot time if the order is violated RS: o Add support in /etc/drivers.conf for servers that talk to user processes, - disallowing IPC to user processes if no "ipc" field is present - adding a special "USER" label to explicitly allow IPC to user processes o Always apply IPC masks when specified; remove -i flag from service(8) o Use kernel send mask symmetry to delay adding IPC permissions for labels that do not exist yet, adding them to that label's process upon creation o Add VM to ipc permissions list for rtl8139 and fxp in drivers.conf Left to future fixes: o Removal of the table order vs process numbers dependency altogether, possibly using per-process send list structures as used for SYSTEM calls o Proper assignment of send masks to boot processes; some of the assigned (~0) masks are much wider than necessary o Proper assignment of IPC send masks for many more servers in drivers.conf o Removal of the debugging warning about the now legitimate case where RS's add_forward_ipc cannot find the IPC destination's label yet
2009-07-02 18:25:31 +02:00
}
/*===========================================================================*
* unset_sendto_bit *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void unset_sendto_bit(const struct proc *rp, int id)
IPC privileges fixes Kernel: o Remove s_ipc_sendrec, instead using s_ipc_to for all send primitives o Centralize s_ipc_to bit manipulation, - disallowing assignment of bits pointing to unused priv structs; - preventing send-to-self by not setting bit for own priv struct; - preserving send mask matrix symmetry in all cases o Add IPC send mask checks to SENDA, which were missing entirely somehow o Slightly improve IPC stats accounting for SENDA o Remove SYSTEM from user processes' send mask o Half-fix the dependency between boot image order and process numbers, - correcting the table order of the boot processes; - documenting the order requirement needed for proper send masks; - warning at boot time if the order is violated RS: o Add support in /etc/drivers.conf for servers that talk to user processes, - disallowing IPC to user processes if no "ipc" field is present - adding a special "USER" label to explicitly allow IPC to user processes o Always apply IPC masks when specified; remove -i flag from service(8) o Use kernel send mask symmetry to delay adding IPC permissions for labels that do not exist yet, adding them to that label's process upon creation o Add VM to ipc permissions list for rtl8139 and fxp in drivers.conf Left to future fixes: o Removal of the table order vs process numbers dependency altogether, possibly using per-process send list structures as used for SYSTEM calls o Proper assignment of send masks to boot processes; some of the assigned (~0) masks are much wider than necessary o Proper assignment of IPC send masks for many more servers in drivers.conf o Removal of the debugging warning about the now legitimate case where RS's add_forward_ipc cannot find the IPC destination's label yet
2009-07-02 18:25:31 +02:00
{
/* Prevent a process from sending to another process. Retain the send mask
* symmetry by also unsetting the bit for the other direction.
*/
unset_sys_bit(priv(rp)->s_ipc_to, id);
unset_sys_bit(priv_addr(id)->s_ipc_to, priv_id(rp));
}
2010-07-07 00:05:21 +02:00
/*===========================================================================*
* fill_sendto_mask *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void fill_sendto_mask(const struct proc *rp, sys_map_t *map)
2010-07-07 00:05:21 +02:00
{
int i;
for (i=0; i < NR_SYS_PROCS; i++) {
if (get_sys_bit(*map, i))
2010-07-07 00:05:21 +02:00
set_sendto_bit(rp, i);
else
unset_sendto_bit(rp, i);
}
}
/*===========================================================================*
* send_sig *
*===========================================================================*/
int send_sig(endpoint_t ep, int sig_nr)
{
/* Notify a system process about a signal. This is straightforward. Simply
* set the signal that is to be delivered in the pending signals map and
* send a notification with source SYSTEM.
*/
register struct proc *rp;
No more intel/minix segments. This commit removes all traces of Minix segments (the text/data/stack memory map abstraction in the kernel) and significance of Intel segments (hardware segments like CS, DS that add offsets to all addressing before page table translation). This ultimately simplifies the memory layout and addressing and makes the same layout possible on non-Intel architectures. There are only two types of addresses in the world now: virtual and physical; even the kernel and processes have the same virtual address space. Kernel and user processes can be distinguished at a glance as processes won't use 0xF0000000 and above. No static pre-allocated memory sizes exist any more. Changes to booting: . The pre_init.c leaves the kernel and modules exactly as they were left by the bootloader in physical memory . The kernel starts running using physical addressing, loaded at a fixed location given in its linker script by the bootloader. All code and data in this phase are linked to this fixed low location. . It makes a bootstrap pagetable to map itself to a fixed high location (also in linker script) and jumps to the high address. All code and data then use this high addressing. . All code/data symbols linked at the low addresses is prefixed by an objcopy step with __k_unpaged_*, so that that code cannot reference highly-linked symbols (which aren't valid yet) or vice versa (symbols that aren't valid any more). . The two addressing modes are separated in the linker script by collecting the unpaged_*.o objects and linking them with low addresses, and linking the rest high. Some objects are linked twice, once low and once high. . The bootstrap phase passes a lot of information (e.g. free memory list, physical location of the modules, etc.) using the kinfo struct. . After this bootstrap the low-linked part is freed. . The kernel maps in VM into the bootstrap page table so that VM can begin executing. Its first job is to make page tables for all other boot processes. So VM runs before RS, and RS gets a fully dynamic, VM-managed address space. VM gets its privilege info from RS as usual but that happens after RS starts running. . Both the kernel loading VM and VM organizing boot processes happen using the libexec logic. This removes the last reason for VM to still know much about exec() and vm/exec.c is gone. Further Implementation: . All segments are based at 0 and have a 4 GB limit. . The kernel is mapped in at the top of the virtual address space so as not to constrain the user processes. . Processes do not use segments from the LDT at all; there are no segments in the LDT any more, so no LLDT is needed. . The Minix segments T/D/S are gone and so none of the user-space or in-kernel copy functions use them. The copy functions use a process endpoint of NONE to realize it's a physical address, virtual otherwise. . The umap call only makes sense to translate a virtual address to a physical address now. . Segments-related calls like newmap and alloc_segments are gone. . All segments-related translation in VM is gone (vir2map etc). . Initialization in VM is simpler as no moving around is necessary. . VM and all other boot processes can be linked wherever they wish and will be mapped in at the right location by the kernel and VM respectively. Other changes: . The multiboot code is less special: it does not use mb_print for its diagnostics any more but uses printf() as normal, saving the output into the diagnostics buffer, only printing to the screen using the direct print functions if a panic() occurs. . The multiboot code uses the flexible 'free memory map list' style to receive the list of free memory if available. . The kernel determines the memory layout of the processes to a degree: it tells VM where the kernel starts and ends and where the kernel wants the top of the process to be. VM then uses this entire range, i.e. the stack is right at the top, and mmap()ped bits of memory are placed below that downwards, and the break grows upwards. Other Consequences: . Every process gets its own page table as address spaces can't be separated any more by segments. . As all segments are 0-based, there is no distinction between virtual and linear addresses, nor between userspace and kernel addresses. . Less work is done when context switching, leading to a net performance increase. (8% faster on my machine for 'make servers'.) . The layout and configuration of the GDT makes sysenter and syscall possible.
2012-05-07 16:03:35 +02:00
struct priv *priv;
2010-07-07 00:05:21 +02:00
int proc_nr;
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
2010-07-07 00:05:21 +02:00
if(!isokendpt(ep, &proc_nr) || isemptyn(proc_nr))
return EINVAL;
rp = proc_addr(proc_nr);
No more intel/minix segments. This commit removes all traces of Minix segments (the text/data/stack memory map abstraction in the kernel) and significance of Intel segments (hardware segments like CS, DS that add offsets to all addressing before page table translation). This ultimately simplifies the memory layout and addressing and makes the same layout possible on non-Intel architectures. There are only two types of addresses in the world now: virtual and physical; even the kernel and processes have the same virtual address space. Kernel and user processes can be distinguished at a glance as processes won't use 0xF0000000 and above. No static pre-allocated memory sizes exist any more. Changes to booting: . The pre_init.c leaves the kernel and modules exactly as they were left by the bootloader in physical memory . The kernel starts running using physical addressing, loaded at a fixed location given in its linker script by the bootloader. All code and data in this phase are linked to this fixed low location. . It makes a bootstrap pagetable to map itself to a fixed high location (also in linker script) and jumps to the high address. All code and data then use this high addressing. . All code/data symbols linked at the low addresses is prefixed by an objcopy step with __k_unpaged_*, so that that code cannot reference highly-linked symbols (which aren't valid yet) or vice versa (symbols that aren't valid any more). . The two addressing modes are separated in the linker script by collecting the unpaged_*.o objects and linking them with low addresses, and linking the rest high. Some objects are linked twice, once low and once high. . The bootstrap phase passes a lot of information (e.g. free memory list, physical location of the modules, etc.) using the kinfo struct. . After this bootstrap the low-linked part is freed. . The kernel maps in VM into the bootstrap page table so that VM can begin executing. Its first job is to make page tables for all other boot processes. So VM runs before RS, and RS gets a fully dynamic, VM-managed address space. VM gets its privilege info from RS as usual but that happens after RS starts running. . Both the kernel loading VM and VM organizing boot processes happen using the libexec logic. This removes the last reason for VM to still know much about exec() and vm/exec.c is gone. Further Implementation: . All segments are based at 0 and have a 4 GB limit. . The kernel is mapped in at the top of the virtual address space so as not to constrain the user processes. . Processes do not use segments from the LDT at all; there are no segments in the LDT any more, so no LLDT is needed. . The Minix segments T/D/S are gone and so none of the user-space or in-kernel copy functions use them. The copy functions use a process endpoint of NONE to realize it's a physical address, virtual otherwise. . The umap call only makes sense to translate a virtual address to a physical address now. . Segments-related calls like newmap and alloc_segments are gone. . All segments-related translation in VM is gone (vir2map etc). . Initialization in VM is simpler as no moving around is necessary. . VM and all other boot processes can be linked wherever they wish and will be mapped in at the right location by the kernel and VM respectively. Other changes: . The multiboot code is less special: it does not use mb_print for its diagnostics any more but uses printf() as normal, saving the output into the diagnostics buffer, only printing to the screen using the direct print functions if a panic() occurs. . The multiboot code uses the flexible 'free memory map list' style to receive the list of free memory if available. . The kernel determines the memory layout of the processes to a degree: it tells VM where the kernel starts and ends and where the kernel wants the top of the process to be. VM then uses this entire range, i.e. the stack is right at the top, and mmap()ped bits of memory are placed below that downwards, and the break grows upwards. Other Consequences: . Every process gets its own page table as address spaces can't be separated any more by segments. . As all segments are 0-based, there is no distinction between virtual and linear addresses, nor between userspace and kernel addresses. . Less work is done when context switching, leading to a net performance increase. (8% faster on my machine for 'make servers'.) . The layout and configuration of the GDT makes sysenter and syscall possible.
2012-05-07 16:03:35 +02:00
priv = priv(rp);
if(!priv) return ENOENT;
sigaddset(&priv->s_sig_pending, sig_nr);
increase_proc_signals(rp);
mini_notify(proc_addr(SYSTEM), rp->p_endpoint);
return OK;
}
2005-04-21 16:53:53 +02:00
/*===========================================================================*
* cause_sig *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void cause_sig(proc_nr, sig_nr)
proc_nr_t proc_nr; /* process to be signalled */
2009-11-28 14:20:50 +01:00
int sig_nr; /* signal to be sent */
2005-04-21 16:53:53 +02:00
{
/* A system process wants to send a signal to a process. Examples are:
* - HARDWARE wanting to cause a SIGSEGV after a CPU exception
* - TTY wanting to cause SIGINT upon getting a DEL
* - FS wanting to cause SIGPIPE for a broken pipe
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
* Signals are handled by sending a message to the signal manager assigned to
* the process. This function handles the signals and makes sure the signal
* manager gets them by sending a notification. The process being signaled
* is blocked while the signal manager has not finished all signals for it.
* Race conditions between calls to this function and the system calls that
* process pending kernel signals cannot exist. Signal related functions are
* only called when a user process causes a CPU exception and from the kernel
* process level, which runs to completion.
2005-04-21 16:53:53 +02:00
*/
2010-07-07 00:05:21 +02:00
register struct proc *rp, *sig_mgr_rp;
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
endpoint_t sig_mgr;
2010-07-07 00:05:21 +02:00
int sig_mgr_proc_nr;
2005-04-21 16:53:53 +02:00
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
/* Lookup signal manager. */
rp = proc_addr(proc_nr);
sig_mgr = priv(rp)->s_sig_mgr;
2010-07-07 00:05:21 +02:00
if(sig_mgr == SELF) sig_mgr = rp->p_endpoint;
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
/* If the target is the signal manager of itself, send the signal directly. */
if(rp->p_endpoint == sig_mgr) {
if(SIGS_IS_LETHAL(sig_nr)) {
2010-07-07 00:05:21 +02:00
/* If the signal is lethal, see if a backup signal manager exists. */
sig_mgr = priv(rp)->s_bak_sig_mgr;
if(sig_mgr != NONE && isokendpt(sig_mgr, &sig_mgr_proc_nr)) {
priv(rp)->s_sig_mgr = sig_mgr;
priv(rp)->s_bak_sig_mgr = NONE;
sig_mgr_rp = proc_addr(sig_mgr_proc_nr);
RTS_UNSET(sig_mgr_rp, RTS_NO_PRIV);
cause_sig(proc_nr, sig_nr); /* try again with the new sig mgr. */
return;
}
/* We are out of luck. Time to panic. */
proc_stacktrace(rp);
2010-07-07 00:05:21 +02:00
panic("cause_sig: sig manager %d gets lethal signal %d for itself",
rp->p_endpoint, sig_nr);
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
}
sigaddset(&priv(rp)->s_sig_pending, sig_nr);
if(OK != send_sig(rp->p_endpoint, SIGKSIGSM))
panic("send_sig failed");
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
return;
}
/* Check if the signal is already pending. Process it otherwise. */
if (! sigismember(&rp->p_pending, sig_nr)) {
sigaddset(&rp->p_pending, sig_nr);
increase_proc_signals(rp);
if (! (RTS_ISSET(rp, RTS_SIGNALED))) { /* other pending */
RTS_SET(rp, RTS_SIGNALED | RTS_SIG_PENDING);
if(OK != send_sig(sig_mgr, SIGKSIG))
panic("send_sig failed");
}
}
2005-04-21 16:53:53 +02:00
}
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
/*===========================================================================*
* sig_delay_done *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void sig_delay_done(struct proc *rp)
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
{
/* A process is now known not to send any direct messages.
* Tell PM that the stop delay has ended, by sending a signal to the process.
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
* Used for actual signal delivery.
*/
rp->p_misc_flags &= ~MF_SIG_DELAY;
cause_sig(proc_nr(rp), SIGSNDELAY);
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
}
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
/*===========================================================================*
* clear_ipc *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
static void clear_ipc(
register struct proc *rc /* slot of process to clean up */
)
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
{
/* Clear IPC data for a given process slot. */
struct proc **xpp; /* iterate over caller queue */
if (RTS_ISSET(rc, RTS_SENDING)) {
int target_proc;
okendpt(rc->p_sendto_e, &target_proc);
xpp = &proc_addr(target_proc)->p_caller_q; /* destination's queue */
while (*xpp) { /* check entire queue */
if (*xpp == rc) { /* process is on the queue */
*xpp = (*xpp)->p_q_link; /* replace by next process */
#if DEBUG_ENABLE_IPC_WARNINGS
printf("endpoint %d / %s removed from queue at %d\n",
2009-01-14 09:52:50 +01:00
rc->p_endpoint, rc->p_name, rc->p_sendto_e);
#endif
break; /* can only be queued once */
}
xpp = &(*xpp)->p_q_link; /* proceed to next queued */
}
RTS_UNSET(rc, RTS_SENDING);
}
RTS_UNSET(rc, RTS_RECEIVING);
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
}
/*===========================================================================*
* clear_endpoint *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void clear_endpoint(rc)
register struct proc *rc; /* slot of process to clean up */
{
if(isemptyp(rc)) panic("clear_proc: empty process: %d", rc->p_endpoint);
#if DEBUG_IPC_HOOK
hook_ipc_clear(rc);
#endif
/* Make sure that the exiting process is no longer scheduled. */
RTS_SET(rc, RTS_NO_ENDPOINT);
if (priv(rc)->s_flags & SYS_PROC)
{
priv(rc)->s_asynsize= 0;
}
/* If the process happens to be queued trying to send a
* message, then it must be removed from the message queues.
*/
clear_ipc(rc);
/* Likewise, if another process was sending or receive a message to or from
* the exiting process, it must be alerted that process no longer is alive.
* Check all processes.
*/
clear_ipc_refs(rc, EDEADSRCDST);
}
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
/*===========================================================================*
* clear_ipc_refs *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void clear_ipc_refs(rc, caller_ret)
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
register struct proc *rc; /* slot of process to clean up */
int caller_ret; /* code to return on callers */
{
/* Clear IPC references for a given process slot. */
struct proc *rp; /* iterate over process table */
int src_id;
/* Tell processes that sent asynchronous messages to 'rc' they are not
* going to be delivered */
while ((src_id = has_pending_asend(rc, ANY)) != NULL_PRIV_ID)
cancel_async(proc_addr(id_to_nr(src_id)), rc);
for (rp = BEG_PROC_ADDR; rp < END_PROC_ADDR; rp++) {
if(isemptyp(rp))
continue;
/* Unset pending notification bits. */
unset_sys_bit(priv(rp)->s_notify_pending, priv(rc)->s_id);
/* Unset pending asynchronous messages */
unset_sys_bit(priv(rp)->s_asyn_pending, priv(rc)->s_id);
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
/* Check if process depends on given process. */
if (P_BLOCKEDON(rp) == rc->p_endpoint) {
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
rp->p_reg.retreg = caller_ret; /* return requested code */
clear_ipc(rp);
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
}
}
}
/*===========================================================================*
* kernel_call_resume *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void kernel_call_resume(struct proc *caller)
{
int result;
assert(!RTS_ISSET(caller, RTS_SLOT_FREE));
assert(!RTS_ISSET(caller, RTS_VMREQUEST));
assert(caller->p_vmrequest.saved.reqmsg.m_source == caller->p_endpoint);
/*
printf("KERNEL_CALL restart from %s / %d rts 0x%08x misc 0x%08x\n",
caller->p_name, caller->p_endpoint,
caller->p_rts_flags, caller->p_misc_flags);
*/
/* re-execute the kernel call, with MF_KCALL_RESUME still set so
* the call knows this is a retry.
*/
result = kernel_call_dispatch(caller, &caller->p_vmrequest.saved.reqmsg);
/*
* we are resuming the kernel call so we have to remove this flag so it
* can be set again
*/
caller->p_misc_flags &= ~MF_KCALL_RESUME;
kernel_call_finish(caller, &caller->p_vmrequest.saved.reqmsg, result);
}
/*===========================================================================*
* sched_proc *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
int sched_proc(struct proc *p,
int priority,
int quantum,
int cpu)
{
/* Make sure the values given are within the allowed range.*/
if ((priority < TASK_Q && priority != -1) || priority > NR_SCHED_QUEUES)
return(EINVAL);
if (quantum < 1 && quantum != -1)
return(EINVAL);
#ifdef CONFIG_SMP
if ((cpu < 0 && cpu != -1) || (cpu > 0 && (unsigned) cpu >= ncpus))
return(EINVAL);
if (cpu != -1 && !(cpu_is_ready(cpu)))
return EBADCPU;
#endif
/* In some cases, we might be rescheduling a runnable process. In such
* a case (i.e. if we are updating the priority) we set the NO_QUANTUM
* flag before the generic unset to dequeue/enqueue the process
*/
/* FIXME this preempts the process, do we really want to do that ?*/
/* FIXME this is a problem for SMP if the processes currently runs on a
* different CPU */
if (proc_is_runnable(p)) {
#ifdef CONFIG_SMP
if (p->p_cpu != cpuid && cpu != -1 && cpu != p->p_cpu) {
smp_schedule_migrate_proc(p, cpu);
}
#endif
RTS_SET(p, RTS_NO_QUANTUM);
}
if (proc_is_runnable(p))
RTS_SET(p, RTS_NO_QUANTUM);
if (priority != -1)
p->p_priority = priority;
if (quantum != -1) {
p->p_quantum_size_ms = quantum;
p->p_cpu_time_left = ms_2_cpu_time(quantum);
}
#ifdef CONFIG_SMP
if (cpu != -1)
p->p_cpu = cpu;
#endif
/* Clear the scheduling bit and enqueue the process */
RTS_UNSET(p, RTS_NO_QUANTUM);
return OK;
}