millisecond, microsecond, etc. so that the user can explicitly
convert between system ticks and time and know what sorts of
expensive operations are being used for that conversion.
arch/alpha/alpha_tru64_process.cc:
arch/alpha/pseudo_inst.cc:
dev/etherdump.cc:
dev/etherlink.cc:
dev/ns_gige.cc:
dev/sinic.cc:
dev/tsunami_io.cc:
dev/uart.cc:
sim/stat_control.cc:
sim/syscall_emul.hh:
Use the new variables for getting the event clock
dev/etherdump.hh:
delete variables that are no longer needed.
--HG--
extra : convert_revision : d95fc7d44909443e1b7952a24ef822ef051c7cf2
all but tlaser_node.cc dependence on tlaserreg.h
dev/tsunami_io.cc:
dev/tsunamireg.h:
removed tlaserreg.h
--HG--
extra : convert_revision : 148a5d79530e5ed721a49279f684a48041deed2b
wierd ini files. The ini files are still used as an intermediate step,
but a sophisticated python library exists to help build them more
easily.
SConscript:
add the new embedded file stuff
remove all of the old object description junk
base/inifile.cc:
base/inifile.hh:
get rid of findDefault and findAppend since they were the source
of much evil.
base/trace.cc:
For now, if we don't have the dprintf_stream set up, dump
to standard out. We probably want a command line option
for this.
dev/alpha_console.cc:
PioDevice now takes a platform parameter.
All PioDevices must have a pio_latency parameter. We stick
a dummy parameter in here for now until we get rid of the
builder stuff.
dev/alpha_console.hh:
don't need Platform anymore
dev/baddev.cc:
PioDevice now takes a platform parameter.
All PioDevices must have a pio_latency parameter. We stick
a dummy parameter in here for now until we get rid of the
builder stuff. Same for the platform parameter, though we just
pass the PioDevice a null parameter since it isn't used by
this device and it's quicker.
dev/baddev.hh:
fix #include guards
dev/etherlink.cc:
rename parameters.
dev/ethertap.cc:
rename parameters
dev/ide_ctrl.cc:
All devices need an address even if it will get overwritten later.
dev/ide_disk.cc:
use an enum for the drive ID stuff.
rename disk_delay -> delay
Actually, I think that we should implement "cable select" and
have the controller tell the drive what it is.
dev/io_device.cc:
dev/io_device.hh:
All IO devices take a Platform *
dev/ns_gige.cc:
all devices need an io_bus. rename header_bus to io_bus
We don't need stuff for the interrupt controller since
it's all in the platform now.
dev/ns_gige.hh:
We don't need stuff for the interrupt controller now since
it's all in the platform.
dev/pciconfigall.cc:
Pass a dummy NULL to the PioDevice for the platform since
we don't need one.
dev/pcidev.cc:
Move a bunch of common functionality into the PciDev
dev/platform.hh:
remove unneeded code
dev/tsunami.cc:
remove unused param
dev/tsunami_cchip.cc:
pass platform pointer
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
pass platform variable
dev/uart.hh:
don't need to keep a platform pointer. it's in the base class
kern/linux/linux_system.cc:
kern/tru64/tru64_system.cc:
rename some parameters
sim/builder.cc:
clean up builder code. use more parameters from the
config node. all sections with a type= are now created,
the old mechanisms no longer work
sim/builder.hh:
remove some extra variables since they are found in the ConfigNode
sim/main.cc:
add a quick hack command line argument -X to dump out the
embedded files. (probably should be fixed up a little.)
accept .mpy files
printing to the streams has to happen after the hierarchy
is built since we're moving away from param contexts
sim/param.cc:
add parsing support for ranges
sim/process.cc:
isValid isn't very useful anymore. interpret the names
stdout, stderr, cout, cerr for the file descriptors
sim/pyconfig/SConscript:
Add Action handlers for creating an embedded python file
and for creating an embedded C file.
use these action handlers to embed all objects found in the objects
tree into the binary along with the importer and the m5config stuff
sim/pyconfig/m5config.py:
Major changes to the original configuration file generator. These
changes largely involve implementing copy-on-write like semantics
for all of the SimObjects. Real documentation must be written.
sim/universe.cc:
Universe becomes a SimObject since we don't really have the notion of
param contexts in the python code.
--HG--
rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py
extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
all macros in ev5.hh to inline functions or constant typed
variables and make them follow our style while we're at it.
All of the stuff in this file actually belongs in the ISA
traits code, but this is a first step at getting things done
in the right manner.
arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
arch/alpha/ev5.cc:
arch/alpha/isa_desc:
dev/ns_gige.cc:
kern/tru64/tru64_events.cc:
deal with changes in ev5.hh
arch/alpha/ev5.hh:
Macros are nasty, so let's get rid of them. Convert all
all macros to inline functions or constant typed variables.
Make them follow our style while we're at it.
All of the stuff in this file actually belongs in the ISA
traits code, but this is a first step at getting things done
in the right manner.
arch/alpha/isa_traits.hh:
move some of the ev5 specific code into the isa
arch/alpha/vtophys.cc:
base/remote_gdb.cc:
deal with isa addition
cpu/exec_context.hh:
be less isa specific and use the isa traits to figure out
what we can.
dev/alpha_console.cc:
dev/pciconfigall.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
deal with changes in ev5.hh
I don't believe this masking is actually necessary. We should
look at removing it later.
dev/ide_ctrl.cc:
sort #includes
deal with changes in ev5.hh
--HG--
extra : convert_revision : c8a3adf0a4b1d198aefe38fc38b295abf289b08a
never clear about whether the end of the range was inclusive
or exclusive. Make it inclusive, but also provide a RangeSize()
function that will generate a Range based on a start and a size.
This, in combination with using the comparison operators, makes
almost all usages of the range not care how it is stored.
base/range.cc:
Make the end of the range inclusive.
start/end -> first/last
(end seems too much like end() in stl)
base/range.hh:
Make the end of the range inclusive.
Fix all comparison operators so that they work correctly with
an inclusive range. Also, when comparing one range to another
with <, <=, >, >=, we only look at the beginning of the range
beacuse x <= y should be the same as x < y || x == y. (This wasn't
the case before.)
Add a few functions for making a range:
RangeSize is start and size
RangeEx is start and end where end is exclusive
RangeIn is start and end where end is inclusive
start/end -> first/last
(end seems too much like end() in stl)
dev/alpha_console.cc:
dev/baddev.cc:
dev/ide_ctrl.cc:
dev/ns_gige.cc:
dev/pciconfigall.cc:
dev/pcidev.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
Use the RangeSize function to create a range.
--HG--
extra : convert_revision : 29a7eb7fce745680f1c77fefff456c2144bc3994
ticks for the most commonly accessed devices.
dev/baddev.cc:
Get rid of the constant cache access latency.
For unimportant devices, don't add any latency.
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ns_gige.cc:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/uart.cc:
dev/uart.hh:
make the cache access latency a parameter that is based on bus
ticks.
dev/io_device.cc:
dev/io_device.hh:
add an io latency variable
dev/ns_gige.hh:
this moved to io_device.hh
--HG--
extra : convert_revision : 4883130feeaef48abee492eddf0b8eb40eb94789
base/traceflags.py:
removed TsunamiUart/TlaserUart and added a plain Uart
dev/alpha_console.cc:
updated for new simconsole
dev/platform.hh:
added a uart member to platform
dev/simconsole.cc:
dev/simconsole.hh:
removed lots of legacy code, it should all be ours now.
converted tabs to 8 spaces
added our copyright
dev/tsunami.cc:
uses simconsole.hh rather than console.hh
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
never needed console.hh
dev/tsunami_io.hh:
this does need eventq.hh and it just happend to be working whenn console.hh was
included everywhere
dev/tsunamireg.h:
added a couple more 8250/16550 uart defines
dev/uart.cc:
new uart code, rewritten to support both tlaser and tsunami (both a 8250 and 8530
uart).
dev/uart.hh:
updated for new uart, legacy code removed
--HG--
rename : dev/console.cc => dev/simconsole.cc
rename : dev/console.hh => dev/simconsole.hh
rename : dev/tsunami_uart.cc => dev/uart.cc
rename : dev/tsunami_uart.hh => dev/uart.hh
extra : convert_revision : e663352d49d4c2d3c95643030cf73c0e85ba2f08
and started cleaning up config files.
arch/alpha/isa_desc:
Made implementation of cttz and ctlz more compact
base/remote_gdb.cc:
Added comment about PALcode debugger accesses
dev/baddev.cc:
dev/baddev.hh:
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
Cleaned up includes and changed device from FunctionalMemory to
PioDevice for detailed boot
dev/ns_gige.cc:
The ethernet dev uses two BARs, and the first bars size was being set
incorrectly.
dev/tsunamireg.h:
I don't know why we were using the superpage as the PCI memory addr.
Changed and works correctly with detailed boot.
--HG--
extra : convert_revision : b535e76612cb90b544305dc1aa8c5e0e774564bd
dev/tsunami_io.cc:
Timers don't need to be rescheduled cause they aren't scheduled by
the default constructor
--HG--
extra : convert_revision : afb68e4f0c4e2a2c98f0037e061752690080a503
dev/console.cc:
commented out code that checks if an interrupt is happening before issuing one
because they can get lost when linux boots
dev/console.hh:
added a setPlatform function to set the platform to interrupt
dev/platform.hh:
dev/tsunami.cc:
dev/tsunami.hh:
Added virtual functions to post console interrupts
dev/tsunami_io.cc:
allowed a 64bit read of the PIC since we can't do a physical byte read
dev/tsunami_uart.cc:
moved TsunamiUart to PioDevice
various little fixes to make linux work
dev/tsunami_uart.hh:
Made Tsunami_Uart a PIO device
dev/tsunamireg.h:
added some UART defines and used the ULL macros
kern/linux/linux_system.cc:
commented out waiting for gdb
--HG--
extra : convert_revision : 8cfd0700f3812ab349a6d7f132f85f4f421c5c5e
are present
dev/tsunami_cchip.cc:
Only need to interrupt processors that are there
Move RTC interrupt code into a function
dev/tsunami_cchip.hh:
Make a RTC interrupt function, move variables out of public scope
dev/tsunami_io.cc:
Make a call to the RTC interrupt routine instead
--HG--
extra : convert_revision : 88113664d0e54a7dddc00ec11ff9b9d088232b31
dev/tsunami_cchip.cc:
Add support for IPI, making changes to read/write to MISC register
Particularly the IPREQ, IPINTR, and ITINTR subfields
dev/tsunami_cchip.hh:
Make an array to keep track of the number of outstanding IPI's,
Extend RTC to interrupt all processors, not just cpu0
dev/tsunami_io.cc:
Extend RTC to interrupt all present proccessors, not just cpu0
--HG--
extra : convert_revision : 0715cbf0abb06002c0fb0b05ef369304cdf75001
interrupt to use a different subnumber since both devices could
interrupt at the same time and we don't want to loose one.
dev/tsunami_cchip.cc:
rewrote interrupt code to handle interrupt mask clearing correctly
dev/tsunami_cchip.hh:
changed (post/clear)DRIR to use a interrupt number rather than a vecotr
dev/tsunami_io.cc:
updated for new post/clearDRIR calls
--HG--
extra : convert_revision : 5b39f5e15a66d5eb6e689e6ece62f99b5fa735ab
Changed base_linux.ini file to use physical addresses
dev/alpha_console.cc:
dev/pciconfigall.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
Fix masking of read/write address to get read/write offset
dev/tsunami_uart.cc:
Fix masking of read/write address to get read/write offset
Also added add_child call that was missed
dev/tsunami_uart.hh:
Changed size to 0x8
--HG--
extra : convert_revision : 1468ca43167bfb28b28c4510401a1ebad683e102
some sundry problems with new interface
dev/alpha_console.cc:
dev/alpha_console.hh:
dev/baddev.cc:
dev/baddev.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/pcidev.cc:
dev/pcidev.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
Fixed to use new FunctionalMemory interface
--HG--
extra : convert_revision : bee98e6285d92f28fafacf919ab06eaf333a9b56
dev/tsunami.cc:
Changed so Tsunami has a pointer to the System to which it belongs.
Now it is derived from generic base class Platform so platform stuff
can be accessed based on the system
dev/tsunami_io.cc:
dev/tsunami_io.hh:
Cleanup and added copyright
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
Added event to skip the "calibrate_delay" function, now calculate
loops_per_jiffy based on frequency, interrupt frequency, and constant
sim/system.hh:
Added pointer to generic Platform base class
--HG--
extra : convert_revision : 5bd925eec220a2ca48eb6164d2ecfdec96922c2c
dev/tsunami.hh:
Started commenting code
dev/tsunami_cchip.cc:
removed unneccessary config files
dev/tsunami_io.cc:
Added code to see the value written
dev/tsunami_uart.cc:
conviently one of the addresses the SuperI/O southbridge can be is the same space
as the UART. This stops the simulator from panicing although it should probably be
changed a bit.
--HG--
extra : convert_revision : a3334a2c418ee8228089d0e1791fa78bbb276fe5
cpu/exetrace.cc:
added looking for symbols at PC+4 and PC+8 thanks to gcc skiping
setting the gp where it can and jumping <func>+8
dev/console.cc:
commented out weird interrupt per nate's suggestion
dev/tsunami_cchip.cc:
moved rtc flag to correct bit
dev/tsunami_io.cc:
time interrupt will be 1024Hz and at some point be configurable by
linux
dev/tsunami_io.hh:
Timer interrupt will be 1024hz for now and in the future be
configurable by linux
--HG--
extra : convert_revision : 2fcc924c8848eb3c6166d9d517617ed193a2b89a
dev/tsunami_io.cc:
PIC, PIT, RTC implementation for tsunami working so far
dev/tsunami_io.hh:
PIT, PIC, RTC implementation for tlaser working so far
dev/tsunamireg.h:
Added RTC defines
kern/linux/linux_system.cc:
wrote cycle frequency into variable so linux doesn't probe for it.
The support exists, but it takes two seconds of time to do on a real
machine, so forever in the simulator.
--HG--
extra : convert_revision : e0ed7f271ece4ed69c06af35d1b0e8ed848cd138
dev/tsunami_io.cc:
Add RTC event to change the state of a uip bit
dev/tsunami_io.hh:
Add RTC event to change state of an uip bit
--HG--
extra : convert_revision : acde7bdfe152d3e08f7ed53b4c8e910378f6ae67
dev/tsunami_io.cc:
renamed to io instead of dma since it's more than the DMA controller now
dev/tsunami_io.hh:
renamed from dma to io since it's more than dma just now
--HG--
rename : dev/tsunami_dma.cc => dev/tsunami_io.cc
rename : dev/tsunami_dma.hh => dev/tsunami_io.hh
extra : convert_revision : 4ffb69679eb7cea5725fae3446e088899f1f9315