gem5/src/mem/noncoherent_bus.cc

307 lines
10 KiB
C++
Raw Normal View History

Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
/*
* Copyright (c) 2011-2013 ARM Limited
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
* All rights reserved
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Copyright (c) 2006 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Ali Saidi
* Andreas Hansson
* William Wang
*/
/**
* @file
* Definition of a bus object.
*/
#include "base/misc.hh"
#include "base/trace.hh"
#include "debug/Bus.hh"
#include "debug/BusAddrRanges.hh"
#include "debug/NoncoherentBus.hh"
#include "mem/noncoherent_bus.hh"
NoncoherentBus::NoncoherentBus(const NoncoherentBusParams *p)
: BaseBus(p)
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
{
// create the ports based on the size of the master and slave
// vector ports, and the presence of the default port, the ports
// are enumerated starting from zero
for (int i = 0; i < p->port_master_connection_count; ++i) {
std::string portName = csprintf("%s.master[%d]", name(), i);
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
MasterPort* bp = new NoncoherentBusMasterPort(portName, *this, i);
masterPorts.push_back(bp);
reqLayers.push_back(new ReqLayer(*bp, *this,
csprintf(".reqLayer%d", i)));
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
}
// see if we have a default slave device connected and if so add
// our corresponding master port
if (p->port_default_connection_count) {
defaultPortID = masterPorts.size();
std::string portName = name() + ".default";
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
MasterPort* bp = new NoncoherentBusMasterPort(portName, *this,
defaultPortID);
masterPorts.push_back(bp);
reqLayers.push_back(new ReqLayer(*bp, *this, csprintf(".reqLayer%d",
defaultPortID)));
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
}
// create the slave ports, once again starting at zero
for (int i = 0; i < p->port_slave_connection_count; ++i) {
std::string portName = csprintf("%s.slave[%d]", name(), i);
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
SlavePort* bp = new NoncoherentBusSlavePort(portName, *this, i);
slavePorts.push_back(bp);
respLayers.push_back(new RespLayer(*bp, *this,
csprintf(".respLayer%d", i)));
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
}
clearPortCache();
}
NoncoherentBus::~NoncoherentBus()
{
for (auto l = reqLayers.begin(); l != reqLayers.end(); ++l)
delete *l;
for (auto l = respLayers.begin(); l != respLayers.end(); ++l)
delete *l;
}
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
bool
NoncoherentBus::recvTimingReq(PacketPtr pkt, PortID slave_port_id)
{
// determine the source port based on the id
SlavePort *src_port = slavePorts[slave_port_id];
// we should never see express snoops on a non-coherent bus
assert(!pkt->isExpressSnoop());
// determine the destination based on the address
PortID master_port_id = findPort(pkt->getAddr());
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
// test if the bus should be considered occupied for the current
// port
if (!reqLayers[master_port_id]->tryTiming(src_port)) {
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
DPRINTF(NoncoherentBus, "recvTimingReq: src %s %s 0x%x BUSY\n",
src_port->name(), pkt->cmdString(), pkt->getAddr());
return false;
}
DPRINTF(NoncoherentBus, "recvTimingReq: src %s %s 0x%x\n",
src_port->name(), pkt->cmdString(), pkt->getAddr());
// store size and command as they might be modified when
// forwarding the packet
unsigned int pkt_size = pkt->hasData() ? pkt->getSize() : 0;
unsigned int pkt_cmd = pkt->cmdToIndex();
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
// set the source port for routing of the response
pkt->setSrc(slave_port_id);
calcPacketTiming(pkt);
Tick packetFinishTime = pkt->busLastWordDelay + curTick();
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
// since it is a normal request, attempt to send the packet
bool success = masterPorts[master_port_id]->sendTimingReq(pkt);
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
if (!success) {
// inhibited packets should never be forced to retry
assert(!pkt->memInhibitAsserted());
DPRINTF(NoncoherentBus, "recvTimingReq: src %s %s 0x%x RETRY\n",
src_port->name(), pkt->cmdString(), pkt->getAddr());
// undo the calculation so we can check for 0 again
pkt->busFirstWordDelay = pkt->busLastWordDelay = 0;
// occupy until the header is sent
reqLayers[master_port_id]->failedTiming(src_port,
clockEdge(headerCycles));
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
return false;
}
reqLayers[master_port_id]->succeededTiming(packetFinishTime);
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
// stats updates
dataThroughBus += pkt_size;
pktCount[slave_port_id][master_port_id]++;
totPktSize[slave_port_id][master_port_id] += pkt_size;
transDist[pkt_cmd]++;
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
return true;
}
bool
NoncoherentBus::recvTimingResp(PacketPtr pkt, PortID master_port_id)
{
// determine the source port based on the id
MasterPort *src_port = masterPorts[master_port_id];
// determine the destination based on what is stored in the packet
PortID slave_port_id = pkt->getDest();
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
// test if the bus should be considered occupied for the current
// port
if (!respLayers[slave_port_id]->tryTiming(src_port)) {
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
DPRINTF(NoncoherentBus, "recvTimingResp: src %s %s 0x%x BUSY\n",
src_port->name(), pkt->cmdString(), pkt->getAddr());
return false;
}
DPRINTF(NoncoherentBus, "recvTimingResp: src %s %s 0x%x\n",
src_port->name(), pkt->cmdString(), pkt->getAddr());
// store size and command as they might be modified when
// forwarding the packet
unsigned int pkt_size = pkt->hasData() ? pkt->getSize() : 0;
unsigned int pkt_cmd = pkt->cmdToIndex();
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
calcPacketTiming(pkt);
Tick packetFinishTime = pkt->busLastWordDelay + curTick();
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
// send the packet through the destination slave port
bool success M5_VAR_USED = slavePorts[slave_port_id]->sendTimingResp(pkt);
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
// currently it is illegal to block responses... can lead to
// deadlock
assert(success);
respLayers[slave_port_id]->succeededTiming(packetFinishTime);
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
// stats updates
dataThroughBus += pkt_size;
pktCount[slave_port_id][master_port_id]++;
totPktSize[slave_port_id][master_port_id] += pkt_size;
transDist[pkt_cmd]++;
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
return true;
}
void
NoncoherentBus::recvRetry(PortID master_port_id)
{
// responses never block on forwarding them, so the retry will
// always be coming from a port to which we tried to forward a
// request
reqLayers[master_port_id]->recvRetry();
}
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
Tick
NoncoherentBus::recvAtomic(PacketPtr pkt, PortID slave_port_id)
{
DPRINTF(NoncoherentBus, "recvAtomic: packet src %s addr 0x%x cmd %s\n",
slavePorts[slave_port_id]->name(), pkt->getAddr(),
pkt->cmdString());
// add the request data
dataThroughBus += pkt->hasData() ? pkt->getSize() : 0;
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
// determine the destination port
PortID dest_id = findPort(pkt->getAddr());
// forward the request to the appropriate destination
Tick response_latency = masterPorts[dest_id]->sendAtomic(pkt);
// add the response data
if (pkt->isResponse())
dataThroughBus += pkt->hasData() ? pkt->getSize() : 0;
// @todo: Not setting first-word time
pkt->busLastWordDelay = response_latency;
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
return response_latency;
}
void
NoncoherentBus::recvFunctional(PacketPtr pkt, PortID slave_port_id)
{
if (!pkt->isPrint()) {
// don't do DPRINTFs on PrintReq as it clutters up the output
DPRINTF(NoncoherentBus,
"recvFunctional: packet src %s addr 0x%x cmd %s\n",
slavePorts[slave_port_id]->name(), pkt->getAddr(),
pkt->cmdString());
}
// determine the destination port
PortID dest_id = findPort(pkt->getAddr());
// forward the request to the appropriate destination
masterPorts[dest_id]->sendFunctional(pkt);
}
unsigned int
NoncoherentBus::drain(DrainManager *dm)
{
// sum up the individual layers
unsigned int total = 0;
for (auto l = reqLayers.begin(); l != reqLayers.end(); ++l)
total += (*l)->drain(dm);
for (auto l = respLayers.begin(); l != respLayers.end(); ++l)
total += (*l)->drain(dm);
return total;
}
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
NoncoherentBus*
NoncoherentBusParams::create()
{
return new NoncoherentBus(this);
}
void
NoncoherentBus::regStats()
{
// register the stats of the base class and our two bus layers
BaseBus::regStats();
for (auto l = reqLayers.begin(); l != reqLayers.end(); ++l)
(*l)->regStats();
for (auto l = respLayers.begin(); l != respLayers.end(); ++l)
(*l)->regStats();
dataThroughBus
.name(name() + ".data_through_bus")
.desc("Total data (bytes)")
;
throughput
.name(name() + ".throughput")
.desc("Throughput (bytes/s)")
.precision(0)
;
throughput = dataThroughBus / simSeconds;
}