gem5/dev/tsunami_io.cc

506 lines
15 KiB
C++
Raw Normal View History

/*
* Copyright (c) 2004 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* @file
* Tsunami I/O including PIC, PIT, RTC, DMA
*/
#include <sys/time.h>
#include <deque>
#include <string>
#include <vector>
#include "base/trace.hh"
#include "dev/tsunami_io.hh"
#include "dev/tsunami.hh"
#include "mem/bus/bus.hh"
#include "mem/bus/pio_interface.hh"
#include "mem/bus/pio_interface_impl.hh"
#include "sim/builder.hh"
#include "dev/tsunami_cchip.hh"
#include "dev/tsunamireg.h"
#include "mem/functional_mem/memory_control.hh"
using namespace std;
#define UNIX_YEAR_OFFSET 52
// Timer Event for Periodic interrupt of RTC
TsunamiIO::RTCEvent::RTCEvent(Tsunami* t)
: Event(&mainEventQueue), tsunami(t)
{
DPRINTF(MC146818, "RTC Event Initilizing\n");
schedule(curTick + ticksPerSecond/RTC_RATE);
}
void
TsunamiIO::RTCEvent::process()
{
DPRINTF(MC146818, "RTC Timer Interrupt\n");
schedule(curTick + ticksPerSecond/RTC_RATE);
//Actually interrupt the processor here
tsunami->cchip->postRTC();
}
const char *
TsunamiIO::RTCEvent::description()
{
return "tsunami RTC 1024Hz interrupt";
}
void
TsunamiIO::RTCEvent::serialize(std::ostream &os)
{
Tick time = when();
SERIALIZE_SCALAR(time);
}
void
TsunamiIO::RTCEvent::unserialize(Checkpoint *cp, const std::string &section)
{
Tick time;
UNSERIALIZE_SCALAR(time);
reschedule(time);
}
// Timer Event for PIT Timers
TsunamiIO::ClockEvent::ClockEvent()
: Event(&mainEventQueue)
{
DPRINTF(Tsunami, "Clock Event Initilizing\n");
mode = 0;
}
void
TsunamiIO::ClockEvent::process()
{
DPRINTF(Tsunami, "Timer Interrupt\n");
if (mode == 0)
status = 0x20; // set bit that linux is looking for
else
schedule(curTick + interval);
}
void
TsunamiIO::ClockEvent::Program(int count)
{
DPRINTF(Tsunami, "Timer set to curTick + %d\n", count);
// should be count * (cpufreq/pitfreq)
interval = count * ticksPerSecond/1193180UL;
schedule(curTick + interval);
status = 0;
}
const char *
TsunamiIO::ClockEvent::description()
{
return "tsunami 8254 Interval timer";
}
void
TsunamiIO::ClockEvent::ChangeMode(uint8_t md)
{
mode = md;
}
uint8_t
TsunamiIO::ClockEvent::Status()
{
return status;
}
void
TsunamiIO::ClockEvent::serialize(std::ostream &os)
{
Tick time = scheduled() ? when() : 0;
SERIALIZE_SCALAR(time);
SERIALIZE_SCALAR(status);
SERIALIZE_SCALAR(mode);
SERIALIZE_SCALAR(interval);
}
void
TsunamiIO::ClockEvent::unserialize(Checkpoint *cp, const std::string &section)
{
Tick time;
UNSERIALIZE_SCALAR(time);
UNSERIALIZE_SCALAR(status);
UNSERIALIZE_SCALAR(mode);
UNSERIALIZE_SCALAR(interval);
if (time)
schedule(time);
}
TsunamiIO::TsunamiIO(const string &name, Tsunami *t, time_t init_time,
Addr a, MemoryController *mmu, HierParams *hier, Bus *bus,
Tick pio_latency)
: PioDevice(name), addr(a), tsunami(t), rtc(t)
{
mmu->add_child(this, RangeSize(addr, size));
if (bus) {
pioInterface = newPioInterface(name, hier, bus, this,
&TsunamiIO::cacheAccess);
pioInterface->addAddrRange(RangeSize(addr, size));
pioLatency = pio_latency * bus->clockRatio;
}
// set the back pointer from tsunami to myself
tsunami->io = this;
timerData = 0;
set_time(init_time == 0 ? time(NULL) : init_time);
uip = 1;
picr = 0;
picInterrupting = false;
}
void
TsunamiIO::set_time(time_t t)
{
gmtime_r(&t, &tm);
DPRINTFN("Real-time clock set to %s", asctime(&tm));
}
Fault
TsunamiIO::read(MemReqPtr &req, uint8_t *data)
{
DPRINTF(Tsunami, "io read va=%#x size=%d IOPorrt=%#x\n",
req->vaddr, req->size, req->vaddr & 0xfff);
Addr daddr = (req->paddr - (addr & EV5::PAddrImplMask));
switch(req->size) {
case sizeof(uint8_t):
switch(daddr) {
case TSDEV_PIC1_ISR:
// !!! If this is modified 64bit case needs to be too
// Pal code has to do a 64 bit physical read because there is
// no load physical byte instruction
*(uint8_t*)data = picr;
return No_Fault;
case TSDEV_PIC2_ISR:
// PIC2 not implemnted... just return 0
*(uint8_t*)data = 0x00;
return No_Fault;
case TSDEV_TMR_CTL:
*(uint8_t*)data = timer2.Status();
return No_Fault;
case TSDEV_RTC_DATA:
switch(RTCAddress) {
case RTC_CONTROL_REGISTERA:
*(uint8_t*)data = uip << 7 | 0x26;
uip = !uip;
return No_Fault;
case RTC_CONTROL_REGISTERB:
// DM and 24/12 and UIE
*(uint8_t*)data = 0x46;
return No_Fault;
case RTC_CONTROL_REGISTERC:
// If we want to support RTC user access in linux
// This won't work, but for now it's fine
*(uint8_t*)data = 0x00;
return No_Fault;
case RTC_CONTROL_REGISTERD:
panic("RTC Control Register D not implemented");
case RTC_SECOND:
*(uint8_t *)data = tm.tm_sec;
return No_Fault;
case RTC_MINUTE:
*(uint8_t *)data = tm.tm_min;
return No_Fault;
case RTC_HOUR:
*(uint8_t *)data = tm.tm_hour;
return No_Fault;
case RTC_DAY_OF_WEEK:
*(uint8_t *)data = tm.tm_wday;
return No_Fault;
case RTC_DAY_OF_MONTH:
*(uint8_t *)data = tm.tm_mday;
case RTC_MONTH:
*(uint8_t *)data = tm.tm_mon + 1;
return No_Fault;
case RTC_YEAR:
*(uint8_t *)data = tm.tm_year - UNIX_YEAR_OFFSET;
return No_Fault;
default:
panic("Unknown RTC Address\n");
}
default:
panic("I/O Read - va%#x size %d\n", req->vaddr, req->size);
}
case sizeof(uint16_t):
case sizeof(uint32_t):
panic("I/O Read - invalid size - va %#x size %d\n",
req->vaddr, req->size);
case sizeof(uint64_t):
switch(daddr) {
case TSDEV_PIC1_ISR:
// !!! If this is modified 8bit case needs to be too
// Pal code has to do a 64 bit physical read because there is
// no load physical byte instruction
*(uint64_t*)data = (uint64_t)picr;
return No_Fault;
default:
panic("I/O Read - invalid size - va %#x size %d\n",
req->vaddr, req->size);
}
default:
panic("I/O Read - invalid size - va %#x size %d\n",
req->vaddr, req->size);
}
panic("I/O Read - va%#x size %d\n", req->vaddr, req->size);
return No_Fault;
}
Fault
TsunamiIO::write(MemReqPtr &req, const uint8_t *data)
{
#if TRACING_ON
uint8_t dt = *(uint8_t*)data;
uint64_t dt64 = dt;
#endif
DPRINTF(Tsunami, "io write - va=%#x size=%d IOPort=%#x Data=%#x\n",
req->vaddr, req->size, req->vaddr & 0xfff, dt64);
Addr daddr = (req->paddr - (addr & EV5::PAddrImplMask));
switch(req->size) {
case sizeof(uint8_t):
switch(daddr) {
case TSDEV_PIC1_MASK:
mask1 = ~(*(uint8_t*)data);
if ((picr & mask1) && !picInterrupting) {
picInterrupting = true;
tsunami->cchip->postDRIR(55);
DPRINTF(Tsunami, "posting pic interrupt to cchip\n");
}
if ((!(picr & mask1)) && picInterrupting) {
picInterrupting = false;
tsunami->cchip->clearDRIR(55);
DPRINTF(Tsunami, "clearing pic interrupt\n");
}
return No_Fault;
case TSDEV_PIC2_MASK:
mask2 = *(uint8_t*)data;
//PIC2 Not implemented to interrupt
return No_Fault;
case TSDEV_PIC1_ACK:
// clear the interrupt on the PIC
picr &= ~(1 << (*(uint8_t*)data & 0xF));
if (!(picr & mask1))
tsunami->cchip->clearDRIR(55);
return No_Fault;
case TSDEV_PIC2_ACK:
return No_Fault;
case TSDEV_DMA1_RESET:
return No_Fault;
case TSDEV_DMA2_RESET:
return No_Fault;
case TSDEV_DMA1_MODE:
mode1 = *(uint8_t*)data;
return No_Fault;
case TSDEV_DMA2_MODE:
mode2 = *(uint8_t*)data;
return No_Fault;
case TSDEV_DMA1_MASK:
case TSDEV_DMA2_MASK:
return No_Fault;
case TSDEV_TMR_CTL:
return No_Fault;
case TSDEV_TMR2_CTL:
if ((*(uint8_t*)data & 0x30) != 0x30)
panic("Only L/M write supported\n");
switch(*(uint8_t*)data >> 6) {
case 0:
timer0.ChangeMode((*(uint8_t*)data & 0xF) >> 1);
break;
case 2:
timer2.ChangeMode((*(uint8_t*)data & 0xF) >> 1);
break;
default:
panic("Read Back Command not implemented\n");
}
return No_Fault;
case TSDEV_TMR2_DATA:
/* two writes before we actually start the Timer
so I set a flag in the timerData */
if(timerData & 0x1000) {
timerData &= 0x1000;
timerData += *(uint8_t*)data << 8;
timer2.Program(timerData);
} else {
timerData = *(uint8_t*)data;
timerData |= 0x1000;
}
return No_Fault;
case TSDEV_TMR0_DATA:
/* two writes before we actually start the Timer
so I set a flag in the timerData */
if(timerData & 0x1000) {
timerData &= 0x1000;
timerData += *(uint8_t*)data << 8;
timer0.Program(timerData);
} else {
timerData = *(uint8_t*)data;
timerData |= 0x1000;
}
return No_Fault;
case TSDEV_RTC_ADDR:
RTCAddress = *(uint8_t*)data;
return No_Fault;
case TSDEV_RTC_DATA:
panic("RTC Write not implmented (rtc.o won't work)\n");
default:
panic("I/O Write - va%#x size %d\n", req->vaddr, req->size);
}
case sizeof(uint16_t):
case sizeof(uint32_t):
case sizeof(uint64_t):
default:
panic("I/O Write - invalid size - va %#x size %d\n",
req->vaddr, req->size);
}
return No_Fault;
}
void
TsunamiIO::postPIC(uint8_t bitvector)
{
//PIC2 Is not implemented, because nothing of interest there
picr |= bitvector;
if (picr & mask1) {
tsunami->cchip->postDRIR(55);
DPRINTF(Tsunami, "posting pic interrupt to cchip\n");
}
}
void
TsunamiIO::clearPIC(uint8_t bitvector)
{
//PIC2 Is not implemented, because nothing of interest there
picr &= ~bitvector;
if (!(picr & mask1)) {
tsunami->cchip->clearDRIR(55);
DPRINTF(Tsunami, "clearing pic interrupt to cchip\n");
}
}
Tick
TsunamiIO::cacheAccess(MemReqPtr &req)
{
return curTick + pioLatency;
}
void
TsunamiIO::serialize(std::ostream &os)
{
SERIALIZE_SCALAR(timerData);
SERIALIZE_SCALAR(uip);
SERIALIZE_SCALAR(mask1);
SERIALIZE_SCALAR(mask2);
SERIALIZE_SCALAR(mode1);
SERIALIZE_SCALAR(mode2);
SERIALIZE_SCALAR(picr);
SERIALIZE_SCALAR(picInterrupting);
SERIALIZE_SCALAR(RTCAddress);
// Serialize the timers
nameOut(os, csprintf("%s.timer0", name()));
timer0.serialize(os);
nameOut(os, csprintf("%s.timer2", name()));
timer2.serialize(os);
nameOut(os, csprintf("%s.rtc", name()));
rtc.serialize(os);
}
void
TsunamiIO::unserialize(Checkpoint *cp, const std::string &section)
{
UNSERIALIZE_SCALAR(timerData);
UNSERIALIZE_SCALAR(uip);
UNSERIALIZE_SCALAR(mask1);
UNSERIALIZE_SCALAR(mask2);
UNSERIALIZE_SCALAR(mode1);
UNSERIALIZE_SCALAR(mode2);
UNSERIALIZE_SCALAR(picr);
UNSERIALIZE_SCALAR(picInterrupting);
UNSERIALIZE_SCALAR(RTCAddress);
// Unserialize the timers
timer0.unserialize(cp, csprintf("%s.timer0", section));
timer2.unserialize(cp, csprintf("%s.timer2", section));
rtc.unserialize(cp, csprintf("%s.rtc", section));
}
BEGIN_DECLARE_SIM_OBJECT_PARAMS(TsunamiIO)
SimObjectParam<Tsunami *> tsunami;
Param<time_t> time;
SimObjectParam<MemoryController *> mmu;
Param<Addr> addr;
SimObjectParam<Bus*> io_bus;
Param<Tick> pio_latency;
SimObjectParam<HierParams *> hier;
END_DECLARE_SIM_OBJECT_PARAMS(TsunamiIO)
BEGIN_INIT_SIM_OBJECT_PARAMS(TsunamiIO)
INIT_PARAM(tsunami, "Tsunami"),
INIT_PARAM_DFLT(time, "System time to use "
"(0 for actual time, default is 1/1/06", ULL(1136073600)),
INIT_PARAM(mmu, "Memory Controller"),
INIT_PARAM(addr, "Device Address"),
INIT_PARAM_DFLT(io_bus, "The IO Bus to attach to", NULL),
INIT_PARAM_DFLT(pio_latency, "Programmed IO latency in bus cycles", 1),
INIT_PARAM_DFLT(hier, "Hierarchy global variables", &defaultHierParams)
END_INIT_SIM_OBJECT_PARAMS(TsunamiIO)
CREATE_SIM_OBJECT(TsunamiIO)
{
return new TsunamiIO(getInstanceName(), tsunami, time, addr, mmu, hier,
io_bus, pio_latency);
}
REGISTER_SIM_OBJECT("TsunamiIO", TsunamiIO)