gem5/dev/pciconfigall.cc

246 lines
7.7 KiB
C++
Raw Normal View History

/*
* Copyright (c) 2004 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* @file
* PCI Configspace implementation
*/
#include <deque>
#include <string>
#include <vector>
#include <bitset>
#include "base/trace.hh"
#include "dev/pciconfigall.hh"
#include "dev/pcidev.hh"
#include "dev/pcireg.h"
#include "mem/bus/bus.hh"
#include "mem/bus/pio_interface.hh"
#include "mem/bus/pio_interface_impl.hh"
#include "mem/functional_mem/memory_control.hh"
#include "sim/builder.hh"
#include "sim/system.hh"
using namespace std;
New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
2005-01-15 10:12:25 +01:00
PciConfigAll::PciConfigAll(const string &name,
Addr a, MemoryController *mmu,
HierParams *hier, Bus *bus, Tick pio_latency)
New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
2005-01-15 10:12:25 +01:00
: PioDevice(name, NULL), addr(a)
{
mmu->add_child(this, RangeSize(addr, size));
if (bus) {
pioInterface = newPioInterface(name, hier, bus, this,
&PciConfigAll::cacheAccess);
pioInterface->addAddrRange(RangeSize(addr, size));
pioLatency = pio_latency * bus->clockRatio;
}
// Make all the pointers to devices null
for(int x=0; x < MAX_PCI_DEV; x++)
for(int y=0; y < MAX_PCI_FUNC; y++)
devices[x][y] = NULL;
}
// If two interrupts share the same line largely bad things will happen.
// Since we don't track how many times an interrupt was set and correspondingly
// cleared two devices on the same interrupt line and assert and deassert each
// others interrupt "line". Interrupts will not work correctly.
void
PciConfigAll::startup()
{
bitset<256> intLines;
PciDev *tempDev;
uint8_t intline;
for (int x = 0; x < MAX_PCI_DEV; x++) {
for (int y = 0; y < MAX_PCI_FUNC; y++) {
if (devices[x][y] != NULL) {
tempDev = devices[x][y];
intline = tempDev->interruptLine();
if (intLines.test(intline))
warn("Interrupt line %#X is used multiple times"
"(You probably want to fix this).\n", (uint32_t)intline);
else
intLines.set(intline);
} // devices != NULL
} // PCI_FUNC
} // PCI_DEV
}
Fault
PciConfigAll::read(MemReqPtr &req, uint8_t *data)
{
Addr daddr = (req->paddr - (addr & EV5::PAddrImplMask));
DPRINTF(PciConfigAll, "read va=%#x da=%#x size=%d\n",
req->vaddr, daddr, req->size);
int device = (daddr >> 11) & 0x1F;
int func = (daddr >> 8) & 0x7;
int reg = daddr & 0xFF;
if (devices[device][func] == NULL) {
switch (req->size) {
// case sizeof(uint64_t):
// *(uint64_t*)data = 0xFFFFFFFFFFFFFFFF;
// return No_Fault;
case sizeof(uint32_t):
*(uint32_t*)data = 0xFFFFFFFF;
return No_Fault;
case sizeof(uint16_t):
*(uint16_t*)data = 0xFFFF;
return No_Fault;
case sizeof(uint8_t):
*(uint8_t*)data = 0xFF;
return No_Fault;
default:
panic("invalid access size(?) for PCI configspace!\n");
}
} else {
switch (req->size) {
case sizeof(uint32_t):
case sizeof(uint16_t):
case sizeof(uint8_t):
devices[device][func]->ReadConfig(reg, req->size, data);
return No_Fault;
default:
panic("invalid access size(?) for PCI configspace!\n");
}
}
DPRINTFN("PCI Configspace ERROR: read daddr=%#x size=%d\n",
daddr, req->size);
return No_Fault;
}
Fault
PciConfigAll::write(MemReqPtr &req, const uint8_t *data)
{
Addr daddr = (req->paddr - (addr & EV5::PAddrImplMask));
int device = (daddr >> 11) & 0x1F;
int func = (daddr >> 8) & 0x7;
int reg = daddr & 0xFF;
union {
uint8_t byte_value;
uint16_t half_value;
uint32_t word_value;
};
if (devices[device][func] == NULL)
panic("Attempting to write to config space on non-existant device\n");
else {
switch (req->size) {
case sizeof(uint8_t):
byte_value = *(uint8_t*)data;
break;
case sizeof(uint16_t):
half_value = *(uint16_t*)data;
break;
case sizeof(uint32_t):
word_value = *(uint32_t*)data;
break;
default:
panic("invalid access size(?) for PCI configspace!\n");
}
}
DPRINTF(PciConfigAll, "write - va=%#x size=%d data=%#x\n",
req->vaddr, req->size, word_value);
devices[device][func]->WriteConfig(reg, req->size, word_value);
return No_Fault;
}
void
PciConfigAll::serialize(std::ostream &os)
{
/*
* There is no state associated with this object that requires
* serialization. The only real state are the device pointers
* which are all setup by the constructor of the PciDev class
*/
}
void
PciConfigAll::unserialize(Checkpoint *cp, const std::string &section)
{
/*
* There is no state associated with this object that requires
* serialization. The only real state are the device pointers
* which are all setup by the constructor of the PciDev class
*/
}
Tick
PciConfigAll::cacheAccess(MemReqPtr &req)
{
return curTick + pioLatency;
}
#ifndef DOXYGEN_SHOULD_SKIP_THIS
BEGIN_DECLARE_SIM_OBJECT_PARAMS(PciConfigAll)
SimObjectParam<MemoryController *> mmu;
Param<Addr> addr;
Param<Addr> mask;
SimObjectParam<Bus*> io_bus;
Param<Tick> pio_latency;
SimObjectParam<HierParams *> hier;
END_DECLARE_SIM_OBJECT_PARAMS(PciConfigAll)
BEGIN_INIT_SIM_OBJECT_PARAMS(PciConfigAll)
INIT_PARAM(mmu, "Memory Controller"),
INIT_PARAM(addr, "Device Address"),
INIT_PARAM(mask, "Address Mask"),
INIT_PARAM_DFLT(io_bus, "The IO Bus to attach to", NULL),
INIT_PARAM_DFLT(pio_latency, "Programmed IO latency in bus cycles", 1),
INIT_PARAM_DFLT(hier, "Hierarchy global variables", &defaultHierParams)
END_INIT_SIM_OBJECT_PARAMS(PciConfigAll)
CREATE_SIM_OBJECT(PciConfigAll)
{
return new PciConfigAll(getInstanceName(), addr, mmu, hier, io_bus,
pio_latency);
}
REGISTER_SIM_OBJECT("PciConfigAll", PciConfigAll)
#endif // DOXYGEN_SHOULD_SKIP_THIS