sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
gem5/src/mem/noncoherent_xbar.cc

332 lines
12 KiB
C++
Raw Normal View History

Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
/*
mem: Add crossbar latencies This patch introduces latencies in crossbar that were neglected before. In particular, it adds three parameters in crossbar model: front_end_latency, forward_latency, and response_latency. Along with these parameters, three corresponding members are added: frontEndLatency, forwardLatency, and responseLatency. The coherent crossbar has an additional snoop_response_latency. The latency of the request path through the xbar is set as --> frontEndLatency + forwardLatency In case the snoop filter is enabled, the request path latency is charged also by look-up latency of the snoop filter. --> frontEndLatency + SF(lookupLatency) + forwardLatency. The latency of the response path through the xbar is set instead as --> responseLatency. In case of snoop response, if the response is treated as a normal response the latency associated is again --> responseLatency; If instead it is forwarded as snoop response we add an additional variable + snoopResponseLatency and the latency associated is --> snoopResponseLatency; Furthermore, this patch lets the crossbar progress on the next clock edge after an unused retry, changing the time the crossbar considers itself busy after sending a retry that was not acted upon.
2015-03-02 10:00:46 +01:00
* Copyright (c) 2011-2015 ARM Limited
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
* All rights reserved
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Copyright (c) 2006 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Ali Saidi
* Andreas Hansson
* William Wang
*/
/**
* @file
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
* Definition of a non-coherent crossbar object.
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
*/
#include "base/misc.hh"
#include "base/trace.hh"
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
#include "debug/NoncoherentXBar.hh"
#include "debug/XBar.hh"
#include "mem/noncoherent_xbar.hh"
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
NoncoherentXBar::NoncoherentXBar(const NoncoherentXBarParams *p)
: BaseXBar(p)
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
{
// create the ports based on the size of the master and slave
// vector ports, and the presence of the default port, the ports
// are enumerated starting from zero
for (int i = 0; i < p->port_master_connection_count; ++i) {
Port: Align port names in C++ and Python This patch is a first step to align the port names used in the Python world and the C++ world. Ultimately it serves to make the use of config.json together with output from the simulation easier, including post-processing of statistics. Most notably, the CPU, cache, and bus is addressed in this patch, and there might be other ports that should be updated accordingly. The dash name separator has also been replaced with a "." which is what is used to concatenate the names in python, and a separation is made between the master and slave port in the bus.
2012-07-09 18:35:39 +02:00
std::string portName = csprintf("%s.master[%d]", name(), i);
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
MasterPort* bp = new NoncoherentXBarMasterPort(portName, *this, i);
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
masterPorts.push_back(bp);
mem: Make the buses multi layered This patch makes the buses multi layered, and effectively creates a crossbar structure with distributed contention ports at the destination ports. Before this patch, a bus could have a single request, response and snoop response in flight at any time, and with these changes there can be as many requests as connected slaves (bus master ports), and as many responses as connected masters (bus slave ports). Together with address interleaving, this patch enables us to create high-throughput memory interconnects, e.g. 50+ GByte/s.
2013-05-30 18:54:01 +02:00
reqLayers.push_back(new ReqLayer(*bp, *this,
csprintf(".reqLayer%d", i)));
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
}
// see if we have a default slave device connected and if so add
// our corresponding master port
if (p->port_default_connection_count) {
defaultPortID = masterPorts.size();
Port: Align port names in C++ and Python This patch is a first step to align the port names used in the Python world and the C++ world. Ultimately it serves to make the use of config.json together with output from the simulation easier, including post-processing of statistics. Most notably, the CPU, cache, and bus is addressed in this patch, and there might be other ports that should be updated accordingly. The dash name separator has also been replaced with a "." which is what is used to concatenate the names in python, and a separation is made between the master and slave port in the bus.
2012-07-09 18:35:39 +02:00
std::string portName = name() + ".default";
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
MasterPort* bp = new NoncoherentXBarMasterPort(portName, *this,
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
defaultPortID);
masterPorts.push_back(bp);
mem: Make the buses multi layered This patch makes the buses multi layered, and effectively creates a crossbar structure with distributed contention ports at the destination ports. Before this patch, a bus could have a single request, response and snoop response in flight at any time, and with these changes there can be as many requests as connected slaves (bus master ports), and as many responses as connected masters (bus slave ports). Together with address interleaving, this patch enables us to create high-throughput memory interconnects, e.g. 50+ GByte/s.
2013-05-30 18:54:01 +02:00
reqLayers.push_back(new ReqLayer(*bp, *this, csprintf(".reqLayer%d",
defaultPortID)));
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
}
// create the slave ports, once again starting at zero
for (int i = 0; i < p->port_slave_connection_count; ++i) {
Port: Align port names in C++ and Python This patch is a first step to align the port names used in the Python world and the C++ world. Ultimately it serves to make the use of config.json together with output from the simulation easier, including post-processing of statistics. Most notably, the CPU, cache, and bus is addressed in this patch, and there might be other ports that should be updated accordingly. The dash name separator has also been replaced with a "." which is what is used to concatenate the names in python, and a separation is made between the master and slave port in the bus.
2012-07-09 18:35:39 +02:00
std::string portName = csprintf("%s.slave[%d]", name(), i);
mem: Delay responses in the crossbar before forwarding This patch changes how the crossbar classes deal with responses. Instead of forwarding responses directly and burdening the neighbouring modules in paying for the latency (through the pkt->headerDelay), we now queue them before sending them. The coherency protocol is not affected as requests and any snoop requests/responses are still passed on in zero time. Thus, the responses end up paying for any header delay accumulated when passing through the crossbar. Any latency incurred on the request path will be paid for on the response side, if no other module has dealt with it. As a result of this patch, responses are returned at a later point. This affects the number of outstanding transactions, and quite a few regressions see an impact in blocking due to no MSHRs, increased cache-miss latencies, etc. Going forward we should be able to use the same concept also for snoop responses, and any request that is not an express snoop.
2015-07-03 16:14:44 +02:00
QueuedSlavePort* bp = new NoncoherentXBarSlavePort(portName, *this, i);
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
slavePorts.push_back(bp);
mem: Make the buses multi layered This patch makes the buses multi layered, and effectively creates a crossbar structure with distributed contention ports at the destination ports. Before this patch, a bus could have a single request, response and snoop response in flight at any time, and with these changes there can be as many requests as connected slaves (bus master ports), and as many responses as connected masters (bus slave ports). Together with address interleaving, this patch enables us to create high-throughput memory interconnects, e.g. 50+ GByte/s.
2013-05-30 18:54:01 +02:00
respLayers.push_back(new RespLayer(*bp, *this,
csprintf(".respLayer%d", i)));
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
}
clearPortCache();
}
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
NoncoherentXBar::~NoncoherentXBar()
mem: Make the buses multi layered This patch makes the buses multi layered, and effectively creates a crossbar structure with distributed contention ports at the destination ports. Before this patch, a bus could have a single request, response and snoop response in flight at any time, and with these changes there can be as many requests as connected slaves (bus master ports), and as many responses as connected masters (bus slave ports). Together with address interleaving, this patch enables us to create high-throughput memory interconnects, e.g. 50+ GByte/s.
2013-05-30 18:54:01 +02:00
{
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
for (auto l: reqLayers)
delete l;
for (auto l: respLayers)
delete l;
mem: Make the buses multi layered This patch makes the buses multi layered, and effectively creates a crossbar structure with distributed contention ports at the destination ports. Before this patch, a bus could have a single request, response and snoop response in flight at any time, and with these changes there can be as many requests as connected slaves (bus master ports), and as many responses as connected masters (bus slave ports). Together with address interleaving, this patch enables us to create high-throughput memory interconnects, e.g. 50+ GByte/s.
2013-05-30 18:54:01 +02:00
}
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
bool
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
NoncoherentXBar::recvTimingReq(PacketPtr pkt, PortID slave_port_id)
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
{
// determine the source port based on the id
SlavePort *src_port = slavePorts[slave_port_id];
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
// we should never see express snoops on a non-coherent crossbar
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
assert(!pkt->isExpressSnoop());
mem: Separate waiting for the bus and waiting for a peer This patch splits the retryList into a list of ports that are waiting for the bus itself to become available, and a map that tracks the ports where forwarding failed due to a peer not accepting the packet. Thus, when a retry reaches the bus, it can be sent to the appropriate port that initiated that transaction. As a consequence of this patch, only ports that are really ready to go will get a retry, thus reducing the amount of redundant failed attempts. This patch also makes it easier to reason about the order of servicing requests as the ports waiting for the bus are now clearly FIFO and much easier to change if desired.
2013-03-26 19:46:47 +01:00
// determine the destination based on the address
mem: Add basic stats to the buses This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-05-30 18:53:58 +02:00
PortID master_port_id = findPort(pkt->getAddr());
mem: Separate waiting for the bus and waiting for a peer This patch splits the retryList into a list of ports that are waiting for the bus itself to become available, and a map that tracks the ports where forwarding failed due to a peer not accepting the packet. Thus, when a retry reaches the bus, it can be sent to the appropriate port that initiated that transaction. As a consequence of this patch, only ports that are really ready to go will get a retry, thus reducing the amount of redundant failed attempts. This patch also makes it easier to reason about the order of servicing requests as the ports waiting for the bus are now clearly FIFO and much easier to change if desired.
2013-03-26 19:46:47 +01:00
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
// test if the layer should be considered occupied for the current
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
// port
mem: Make the buses multi layered This patch makes the buses multi layered, and effectively creates a crossbar structure with distributed contention ports at the destination ports. Before this patch, a bus could have a single request, response and snoop response in flight at any time, and with these changes there can be as many requests as connected slaves (bus master ports), and as many responses as connected masters (bus slave ports). Together with address interleaving, this patch enables us to create high-throughput memory interconnects, e.g. 50+ GByte/s.
2013-05-30 18:54:01 +02:00
if (!reqLayers[master_port_id]->tryTiming(src_port)) {
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
DPRINTF(NoncoherentXBar, "recvTimingReq: src %s %s 0x%x BUSY\n",
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
src_port->name(), pkt->cmdString(), pkt->getAddr());
return false;
}
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
DPRINTF(NoncoherentXBar, "recvTimingReq: src %s %s 0x%x\n",
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
src_port->name(), pkt->cmdString(), pkt->getAddr());
mem: Add basic stats to the buses This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-05-30 18:53:58 +02:00
// store size and command as they might be modified when
// forwarding the packet
unsigned int pkt_size = pkt->hasData() ? pkt->getSize() : 0;
unsigned int pkt_cmd = pkt->cmdToIndex();
mem: Add crossbar latencies This patch introduces latencies in crossbar that were neglected before. In particular, it adds three parameters in crossbar model: front_end_latency, forward_latency, and response_latency. Along with these parameters, three corresponding members are added: frontEndLatency, forwardLatency, and responseLatency. The coherent crossbar has an additional snoop_response_latency. The latency of the request path through the xbar is set as --> frontEndLatency + forwardLatency In case the snoop filter is enabled, the request path latency is charged also by look-up latency of the snoop filter. --> frontEndLatency + SF(lookupLatency) + forwardLatency. The latency of the response path through the xbar is set instead as --> responseLatency. In case of snoop response, if the response is treated as a normal response the latency associated is again --> responseLatency; If instead it is forwarded as snoop response we add an additional variable + snoopResponseLatency and the latency associated is --> snoopResponseLatency; Furthermore, this patch lets the crossbar progress on the next clock edge after an unused retry, changing the time the crossbar considers itself busy after sending a retry that was not acted upon.
2015-03-02 10:00:46 +01:00
// store the old header delay so we can restore it if needed
Tick old_header_delay = pkt->headerDelay;
// a request sees the frontend and forward latency
Tick xbar_delay = (frontendLatency + forwardLatency) * clockPeriod();
// set the packet header and payload delay
calcPacketTiming(pkt, xbar_delay);
// determine how long to be crossbar layer is busy
Tick packetFinishTime = clockEdge(Cycles(1)) + pkt->payloadDelay;
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
mem: Make the XBar responsible for tracking response routing This patch removes the need for a source and destination field in the packet by shifting the onus of the tracking to the crossbar, much like a real implementation. This change in behaviour also means we no longer need a SenderState to remember the source/dest when ever we have multiple crossbars in the system. Thus, the stack that was created by the SenderState is not needed, and each crossbar locally tracks the response routing. The fields in the packet are still left behind as the RubyPort (which also acts as a crossbar) does routing based on them. In the succeeding patches the uses of the src and dest field will be removed. Combined, these patches improve the simulation performance by roughly 2%.
2015-01-22 11:01:14 +01:00
// before forwarding the packet (and possibly altering it),
// remember if we are expecting a response
const bool expect_response = pkt->needsResponse() &&
!pkt->memInhibitAsserted();
mem: Separate waiting for the bus and waiting for a peer This patch splits the retryList into a list of ports that are waiting for the bus itself to become available, and a map that tracks the ports where forwarding failed due to a peer not accepting the packet. Thus, when a retry reaches the bus, it can be sent to the appropriate port that initiated that transaction. As a consequence of this patch, only ports that are really ready to go will get a retry, thus reducing the amount of redundant failed attempts. This patch also makes it easier to reason about the order of servicing requests as the ports waiting for the bus are now clearly FIFO and much easier to change if desired.
2013-03-26 19:46:47 +01:00
// since it is a normal request, attempt to send the packet
mem: Add basic stats to the buses This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-05-30 18:53:58 +02:00
bool success = masterPorts[master_port_id]->sendTimingReq(pkt);
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
if (!success) {
// inhibited packets should never be forced to retry
assert(!pkt->memInhibitAsserted());
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
DPRINTF(NoncoherentXBar, "recvTimingReq: src %s %s 0x%x RETRY\n",
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
src_port->name(), pkt->cmdString(), pkt->getAddr());
mem: Add crossbar latencies This patch introduces latencies in crossbar that were neglected before. In particular, it adds three parameters in crossbar model: front_end_latency, forward_latency, and response_latency. Along with these parameters, three corresponding members are added: frontEndLatency, forwardLatency, and responseLatency. The coherent crossbar has an additional snoop_response_latency. The latency of the request path through the xbar is set as --> frontEndLatency + forwardLatency In case the snoop filter is enabled, the request path latency is charged also by look-up latency of the snoop filter. --> frontEndLatency + SF(lookupLatency) + forwardLatency. The latency of the response path through the xbar is set instead as --> responseLatency. In case of snoop response, if the response is treated as a normal response the latency associated is again --> responseLatency; If instead it is forwarded as snoop response we add an additional variable + snoopResponseLatency and the latency associated is --> snoopResponseLatency; Furthermore, this patch lets the crossbar progress on the next clock edge after an unused retry, changing the time the crossbar considers itself busy after sending a retry that was not acted upon.
2015-03-02 10:00:46 +01:00
// restore the header delay as it is additive
pkt->headerDelay = old_header_delay;
mem: Enforce strict use of busFirst- and busLastWordTime This patch adds a check to ensure that the delay incurred by the bus is not simply disregarded, but accounted for by someone. At this point, all the modules do is to zero it out, and no additional time is spent. This highlights where the bus timing is simply dropped instead of being paid for. As a follow up, the locations identified in this patch should add this additional time to the packets in one way or another. For now it simply acts as a sanity check and highlights where the delay is simply ignored. Since no time is added, all regressions remain the same.
2013-02-19 11:56:06 +01:00
mem: Make packet bus-related time accounting relative This patch changes the bus-related time accounting done in the packet to be relative. Besides making it easier to align the cache timing to cache clock cycles, it also makes it possible to create a Last-Level Cache (LLC) directly to a memory controller without a bus inbetween. The bus is unique in that it does not ever make the packets wait to reflect the time spent forwarding them. Instead, the cache is currently responsible for making the packets wait. Thus, the bus annotates the packets with the time needed for the first word to appear, and also the last word. The cache then delays the packets in its queues before passing them on. It is worth noting that every object attached to a bus (devices, memories, bridges, etc) should be doing this if we opt for keeping this way of accounting for the bus timing.
2013-02-19 11:56:06 +01:00
// occupy until the header is sent
mem: Make the buses multi layered This patch makes the buses multi layered, and effectively creates a crossbar structure with distributed contention ports at the destination ports. Before this patch, a bus could have a single request, response and snoop response in flight at any time, and with these changes there can be as many requests as connected slaves (bus master ports), and as many responses as connected masters (bus slave ports). Together with address interleaving, this patch enables us to create high-throughput memory interconnects, e.g. 50+ GByte/s.
2013-05-30 18:54:01 +02:00
reqLayers[master_port_id]->failedTiming(src_port,
mem: Add crossbar latencies This patch introduces latencies in crossbar that were neglected before. In particular, it adds three parameters in crossbar model: front_end_latency, forward_latency, and response_latency. Along with these parameters, three corresponding members are added: frontEndLatency, forwardLatency, and responseLatency. The coherent crossbar has an additional snoop_response_latency. The latency of the request path through the xbar is set as --> frontEndLatency + forwardLatency In case the snoop filter is enabled, the request path latency is charged also by look-up latency of the snoop filter. --> frontEndLatency + SF(lookupLatency) + forwardLatency. The latency of the response path through the xbar is set instead as --> responseLatency. In case of snoop response, if the response is treated as a normal response the latency associated is again --> responseLatency; If instead it is forwarded as snoop response we add an additional variable + snoopResponseLatency and the latency associated is --> snoopResponseLatency; Furthermore, this patch lets the crossbar progress on the next clock edge after an unused retry, changing the time the crossbar considers itself busy after sending a retry that was not acted upon.
2015-03-02 10:00:46 +01:00
clockEdge(Cycles(1)));
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
return false;
}
mem: Make the XBar responsible for tracking response routing This patch removes the need for a source and destination field in the packet by shifting the onus of the tracking to the crossbar, much like a real implementation. This change in behaviour also means we no longer need a SenderState to remember the source/dest when ever we have multiple crossbars in the system. Thus, the stack that was created by the SenderState is not needed, and each crossbar locally tracks the response routing. The fields in the packet are still left behind as the RubyPort (which also acts as a crossbar) does routing based on them. In the succeeding patches the uses of the src and dest field will be removed. Combined, these patches improve the simulation performance by roughly 2%.
2015-01-22 11:01:14 +01:00
// remember where to route the response to
if (expect_response) {
assert(routeTo.find(pkt->req) == routeTo.end());
routeTo[pkt->req] = slave_port_id;
}
mem: Make the buses multi layered This patch makes the buses multi layered, and effectively creates a crossbar structure with distributed contention ports at the destination ports. Before this patch, a bus could have a single request, response and snoop response in flight at any time, and with these changes there can be as many requests as connected slaves (bus master ports), and as many responses as connected masters (bus slave ports). Together with address interleaving, this patch enables us to create high-throughput memory interconnects, e.g. 50+ GByte/s.
2013-05-30 18:54:01 +02:00
reqLayers[master_port_id]->succeededTiming(packetFinishTime);
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
mem: Add basic stats to the buses This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-05-30 18:53:58 +02:00
// stats updates
pktCount[slave_port_id][master_port_id]++;
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
pktSize[slave_port_id][master_port_id] += pkt_size;
mem: Add basic stats to the buses This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-05-30 18:53:58 +02:00
transDist[pkt_cmd]++;
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
return true;
}
bool
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
NoncoherentXBar::recvTimingResp(PacketPtr pkt, PortID master_port_id)
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
{
// determine the source port based on the id
MasterPort *src_port = masterPorts[master_port_id];
mem: Make the XBar responsible for tracking response routing This patch removes the need for a source and destination field in the packet by shifting the onus of the tracking to the crossbar, much like a real implementation. This change in behaviour also means we no longer need a SenderState to remember the source/dest when ever we have multiple crossbars in the system. Thus, the stack that was created by the SenderState is not needed, and each crossbar locally tracks the response routing. The fields in the packet are still left behind as the RubyPort (which also acts as a crossbar) does routing based on them. In the succeeding patches the uses of the src and dest field will be removed. Combined, these patches improve the simulation performance by roughly 2%.
2015-01-22 11:01:14 +01:00
// determine the destination
const auto route_lookup = routeTo.find(pkt->req);
assert(route_lookup != routeTo.end());
const PortID slave_port_id = route_lookup->second;
mem: Relax packet src/dest check and shift onus to crossbar This patch allows objects to get the src/dest of a packet even if it is not set to a valid port id. This simplifies (ab)using the bridge as a buffer and latency adapter in situations where the neighbouring MemObjects are not crossbars. The checks that were done in the packet are now shifted to the crossbar where the fields are used to index into the port arrays. Thus, the carrier of the information is not burdened with checking, and the crossbar can check not only that the destination is set, but also that the port index is within limits.
2014-12-02 12:07:56 +01:00
assert(slave_port_id != InvalidPortID);
assert(slave_port_id < respLayers.size());
mem: Tidy up a few variables in the bus This patch does some minor housekeeping on the bus code, removing redundant code, and moving the extraction of the destination id to the top of the functions using it.
2013-05-30 18:53:59 +02:00
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
// test if the layer should be considered occupied for the current
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
// port
mem: Make the buses multi layered This patch makes the buses multi layered, and effectively creates a crossbar structure with distributed contention ports at the destination ports. Before this patch, a bus could have a single request, response and snoop response in flight at any time, and with these changes there can be as many requests as connected slaves (bus master ports), and as many responses as connected masters (bus slave ports). Together with address interleaving, this patch enables us to create high-throughput memory interconnects, e.g. 50+ GByte/s.
2013-05-30 18:54:01 +02:00
if (!respLayers[slave_port_id]->tryTiming(src_port)) {
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
DPRINTF(NoncoherentXBar, "recvTimingResp: src %s %s 0x%x BUSY\n",
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
src_port->name(), pkt->cmdString(), pkt->getAddr());
return false;
}
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
DPRINTF(NoncoherentXBar, "recvTimingResp: src %s %s 0x%x\n",
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
src_port->name(), pkt->cmdString(), pkt->getAddr());
mem: Add basic stats to the buses This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-05-30 18:53:58 +02:00
// store size and command as they might be modified when
// forwarding the packet
unsigned int pkt_size = pkt->hasData() ? pkt->getSize() : 0;
unsigned int pkt_cmd = pkt->cmdToIndex();
mem: Add crossbar latencies This patch introduces latencies in crossbar that were neglected before. In particular, it adds three parameters in crossbar model: front_end_latency, forward_latency, and response_latency. Along with these parameters, three corresponding members are added: frontEndLatency, forwardLatency, and responseLatency. The coherent crossbar has an additional snoop_response_latency. The latency of the request path through the xbar is set as --> frontEndLatency + forwardLatency In case the snoop filter is enabled, the request path latency is charged also by look-up latency of the snoop filter. --> frontEndLatency + SF(lookupLatency) + forwardLatency. The latency of the response path through the xbar is set instead as --> responseLatency. In case of snoop response, if the response is treated as a normal response the latency associated is again --> responseLatency; If instead it is forwarded as snoop response we add an additional variable + snoopResponseLatency and the latency associated is --> snoopResponseLatency; Furthermore, this patch lets the crossbar progress on the next clock edge after an unused retry, changing the time the crossbar considers itself busy after sending a retry that was not acted upon.
2015-03-02 10:00:46 +01:00
// a response sees the response latency
Tick xbar_delay = responseLatency * clockPeriod();
// set the packet header and payload delay
calcPacketTiming(pkt, xbar_delay);
// determine how long to be crossbar layer is busy
Tick packetFinishTime = clockEdge(Cycles(1)) + pkt->payloadDelay;
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
mem: Delay responses in the crossbar before forwarding This patch changes how the crossbar classes deal with responses. Instead of forwarding responses directly and burdening the neighbouring modules in paying for the latency (through the pkt->headerDelay), we now queue them before sending them. The coherency protocol is not affected as requests and any snoop requests/responses are still passed on in zero time. Thus, the responses end up paying for any header delay accumulated when passing through the crossbar. Any latency incurred on the request path will be paid for on the response side, if no other module has dealt with it. As a result of this patch, responses are returned at a later point. This affects the number of outstanding transactions, and quite a few regressions see an impact in blocking due to no MSHRs, increased cache-miss latencies, etc. Going forward we should be able to use the same concept also for snoop responses, and any request that is not an express snoop.
2015-07-03 16:14:44 +02:00
// send the packet through the destination slave port, and pay for
// any outstanding latency
Tick latency = pkt->headerDelay;
pkt->headerDelay = 0;
slavePorts[slave_port_id]->schedTimingResp(pkt, curTick() + latency);
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
mem: Make the XBar responsible for tracking response routing This patch removes the need for a source and destination field in the packet by shifting the onus of the tracking to the crossbar, much like a real implementation. This change in behaviour also means we no longer need a SenderState to remember the source/dest when ever we have multiple crossbars in the system. Thus, the stack that was created by the SenderState is not needed, and each crossbar locally tracks the response routing. The fields in the packet are still left behind as the RubyPort (which also acts as a crossbar) does routing based on them. In the succeeding patches the uses of the src and dest field will be removed. Combined, these patches improve the simulation performance by roughly 2%.
2015-01-22 11:01:14 +01:00
// remove the request from the routing table
routeTo.erase(route_lookup);
mem: Make the buses multi layered This patch makes the buses multi layered, and effectively creates a crossbar structure with distributed contention ports at the destination ports. Before this patch, a bus could have a single request, response and snoop response in flight at any time, and with these changes there can be as many requests as connected slaves (bus master ports), and as many responses as connected masters (bus slave ports). Together with address interleaving, this patch enables us to create high-throughput memory interconnects, e.g. 50+ GByte/s.
2013-05-30 18:54:01 +02:00
respLayers[slave_port_id]->succeededTiming(packetFinishTime);
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
mem: Add basic stats to the buses This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-05-30 18:53:58 +02:00
// stats updates
pktCount[slave_port_id][master_port_id]++;
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
pktSize[slave_port_id][master_port_id] += pkt_size;
mem: Add basic stats to the buses This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-05-30 18:53:58 +02:00
transDist[pkt_cmd]++;
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
return true;
}
Bus: Add a notion of layers to the buses This patch moves all flow control, arbitration and state information into a bus layer. The layer is thus responsible for all the state transitions, and for keeping hold of the retry list. Consequently the layer is also responsible for the draining. With this change, the non-coherent and coherent bus are given a single layer to avoid changing any temporal behaviour, but the patch opens up for adding more layers.
2012-07-09 18:35:36 +02:00
void
mem: Split port retry for all different packet classes This patch fixes a long-standing isue with the port flow control. Before this patch the retry mechanism was shared between all different packet classes. As a result, a snoop response could get stuck behind a request waiting for a retry, even if the send/recv functions were split. This caused message-dependent deadlocks in stress-test scenarios. The patch splits the retry into one per packet (message) class. Thus, sendTimingReq has a corresponding recvReqRetry, sendTimingResp has recvRespRetry etc. Most of the changes to the code involve simply clarifying what type of request a specific object was accepting. The biggest change in functionality is in the cache downstream packet queue, facing the memory. This queue was shared by requests and snoop responses, and it is now split into two queues, each with their own flow control, but the same physical MasterPort. These changes fixes the previously seen deadlocks.
2015-03-02 10:00:35 +01:00
NoncoherentXBar::recvReqRetry(PortID master_port_id)
Bus: Add a notion of layers to the buses This patch moves all flow control, arbitration and state information into a bus layer. The layer is thus responsible for all the state transitions, and for keeping hold of the retry list. Consequently the layer is also responsible for the draining. With this change, the non-coherent and coherent bus are given a single layer to avoid changing any temporal behaviour, but the patch opens up for adding more layers.
2012-07-09 18:35:36 +02:00
{
Bus: Split the bus into separate request/response layers This patch splits the existing buses into multiple layers. The non-coherent bus is split into a request and a response layer, and the coherent bus adds an additional layer for the snoop responses. The layer is modified to be templatised on the port type, such that the different layers can have retryLists with either master or slave ports. This patch also removes the dynamic cast from the retry, as previously promised when moving the recvRetry from the port base class to the master/slave port respectively. Overall, the split bus more closely reflects any modern on-chip bus and should be at step in the right direction. From this point, it would be reasonable straight forward to add separate layers (and thus contention points and arbitration) for each port and thus create a true crossbar. The regressions all produce the correct output, but have varying degrees of changes to their statistics. A separate patch will be pushed with the updates to the reference statistics.
2012-07-09 18:35:37 +02:00
// responses never block on forwarding them, so the retry will
// always be coming from a port to which we tried to forward a
// request
mem: Make the buses multi layered This patch makes the buses multi layered, and effectively creates a crossbar structure with distributed contention ports at the destination ports. Before this patch, a bus could have a single request, response and snoop response in flight at any time, and with these changes there can be as many requests as connected slaves (bus master ports), and as many responses as connected masters (bus slave ports). Together with address interleaving, this patch enables us to create high-throughput memory interconnects, e.g. 50+ GByte/s.
2013-05-30 18:54:01 +02:00
reqLayers[master_port_id]->recvRetry();
Bus: Add a notion of layers to the buses This patch moves all flow control, arbitration and state information into a bus layer. The layer is thus responsible for all the state transitions, and for keeping hold of the retry list. Consequently the layer is also responsible for the draining. With this change, the non-coherent and coherent bus are given a single layer to avoid changing any temporal behaviour, but the patch opens up for adding more layers.
2012-07-09 18:35:36 +02:00
}
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
Tick
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
NoncoherentXBar::recvAtomic(PacketPtr pkt, PortID slave_port_id)
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
{
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
DPRINTF(NoncoherentXBar, "recvAtomic: packet src %s addr 0x%x cmd %s\n",
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
slavePorts[slave_port_id]->name(), pkt->getAddr(),
pkt->cmdString());
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
unsigned int pkt_size = pkt->hasData() ? pkt->getSize() : 0;
unsigned int pkt_cmd = pkt->cmdToIndex();
mem: Add basic stats to the buses This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-05-30 18:53:58 +02:00
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
// determine the destination port
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
PortID master_port_id = findPort(pkt->getAddr());
// stats updates for the request
pktCount[slave_port_id][master_port_id]++;
pktSize[slave_port_id][master_port_id] += pkt_size;
transDist[pkt_cmd]++;
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
// forward the request to the appropriate destination
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
Tick response_latency = masterPorts[master_port_id]->sendAtomic(pkt);
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
mem: Add basic stats to the buses This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-05-30 18:53:58 +02:00
// add the response data
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
if (pkt->isResponse()) {
pkt_size = pkt->hasData() ? pkt->getSize() : 0;
pkt_cmd = pkt->cmdToIndex();
// stats updates
pktCount[slave_port_id][master_port_id]++;
pktSize[slave_port_id][master_port_id] += pkt_size;
transDist[pkt_cmd]++;
}
mem: Add basic stats to the buses This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-05-30 18:53:58 +02:00
mem: Make packet bus-related time accounting relative This patch changes the bus-related time accounting done in the packet to be relative. Besides making it easier to align the cache timing to cache clock cycles, it also makes it possible to create a Last-Level Cache (LLC) directly to a memory controller without a bus inbetween. The bus is unique in that it does not ever make the packets wait to reflect the time spent forwarding them. Instead, the cache is currently responsible for making the packets wait. Thus, the bus annotates the packets with the time needed for the first word to appear, and also the last word. The cache then delays the packets in its queues before passing them on. It is worth noting that every object attached to a bus (devices, memories, bridges, etc) should be doing this if we opt for keeping this way of accounting for the bus timing.
2013-02-19 11:56:06 +01:00
// @todo: Not setting first-word time
mem: Clarification of packet crossbar timings This patch clarifies the packet timings annotated when going through a crossbar. The old 'firstWordDelay' is replaced by 'headerDelay' that represents the delay associated to the delivery of the header of the packet. The old 'lastWordDelay' is replaced by 'payloadDelay' that represents the delay needed to processing the payload of the packet. For now the uses and values remain identical. However, going forward the payloadDelay will be additive, and not include the headerDelay. Follow-on patches will make the headerDelay capture the pipeline latency incurred in the crossbar, whereas the payloadDelay will capture the additional serialisation delay.
2015-02-11 16:23:47 +01:00
pkt->payloadDelay = response_latency;
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
return response_latency;
}
void
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
NoncoherentXBar::recvFunctional(PacketPtr pkt, PortID slave_port_id)
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
{
if (!pkt->isPrint()) {
// don't do DPRINTFs on PrintReq as it clutters up the output
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
DPRINTF(NoncoherentXBar,
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
"recvFunctional: packet src %s addr 0x%x cmd %s\n",
slavePorts[slave_port_id]->name(), pkt->getAddr(),
pkt->cmdString());
}
mem: Delay responses in the crossbar before forwarding This patch changes how the crossbar classes deal with responses. Instead of forwarding responses directly and burdening the neighbouring modules in paying for the latency (through the pkt->headerDelay), we now queue them before sending them. The coherency protocol is not affected as requests and any snoop requests/responses are still passed on in zero time. Thus, the responses end up paying for any header delay accumulated when passing through the crossbar. Any latency incurred on the request path will be paid for on the response side, if no other module has dealt with it. As a result of this patch, responses are returned at a later point. This affects the number of outstanding transactions, and quite a few regressions see an impact in blocking due to no MSHRs, increased cache-miss latencies, etc. Going forward we should be able to use the same concept also for snoop responses, and any request that is not an express snoop.
2015-07-03 16:14:44 +02:00
// since our slave ports are queued ports we need to check them as well
for (const auto& p : slavePorts) {
// if we find a response that has the data, then the
// downstream caches/memories may be out of date, so simply stop
// here
if (p->checkFunctional(pkt)) {
if (pkt->needsResponse())
pkt->makeResponse();
return;
}
}
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
// determine the destination port
PortID dest_id = findPort(pkt->getAddr());
// forward the request to the appropriate destination
masterPorts[dest_id]->sendFunctional(pkt);
}
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
NoncoherentXBar*
NoncoherentXBarParams::create()
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
{
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
return new NoncoherentXBar(this);
Bus: Split the bus into a non-coherent and coherent bus This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 19:30:04 +02:00
}
mem: Add basic stats to the buses This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-05-30 18:53:58 +02:00
void
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
NoncoherentXBar::regStats()
mem: Add basic stats to the buses This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-05-30 18:53:58 +02:00
{
mem: Rename Bus to XBar to better reflect its behaviour This patch changes the name of the Bus classes to XBar to better reflect the actual timing behaviour. The actual instances in the config scripts are not renamed, and remain as e.g. iobus or membus. As part of this renaming, the code has also been clean up slightly, making use of range-based for loops and tidying up some comments. The only changes outside the bus/crossbar code is due to the delay variables in the packet. --HG-- rename : src/mem/Bus.py => src/mem/XBar.py rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh rename : src/mem/bus.cc => src/mem/xbar.cc rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 23:18:32 +02:00
// register the stats of the base class and our layers
BaseXBar::regStats();
for (auto l: reqLayers)
l->regStats();
for (auto l: respLayers)
l->regStats();
mem: Add basic stats to the buses This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-05-30 18:53:58 +02:00
}
Reference in a new issue Copy permalink