sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
gem5/tests/configs/memtest.py

80 lines
3 KiB
Python
Raw Normal View History

Add short memtest run to quick regressions. Caveats: - Even though memtest is ISA-independent, it will only run for the Alpha builds, since there's no way to specify ISA-independent reference files and I didn't want to commit 3 copies since I'm not sure we want to run it for all the different ISAs anyway. - Reference outputs were generated on my laptop, so performance numbers will be low compared to zizzer. --HG-- extra : convert_revision : 210fe4abecc19fbab0b15402c6cb4863650bab66
2007-02-07 06:16:33 +01:00
# Copyright (c) 2006-2007 The Regents of The University of Michigan
Update the Memtester, commit a config file/test for it. src/cpu/SConscript: Add memtester to the compilation environment. Someone who knows this better should make the MemTest a cpu model parameter. For now attached with the build of o3 cpu. src/cpu/memtest/memtest.cc: src/cpu/memtest/memtest.hh: Update Memtest for new mem system src/python/m5/objects/MemTest.py: Update memtest python description --HG-- extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
2006-10-09 06:26:10 +02:00
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Ron Dreslinski
import m5
from m5.objects import *
config: Unify caches used in regressions and adjust L2 MSHRs This patch unified the L1 and L2 caches used throughout the regressions instead of declaring different, but very similar, configurations in the different scripts. The patch also changes the default L2 configuration to match what it used to be for the fs and se scripts (until the last patch that updated the regressions to also make use of the cache config). The MSHRs and targets per MSHR are now set to a more realistic default of 20 and 12, respectively. As a result of both the aforementioned changes, many of the regression stats are changed. A follow-on patch will bump the stats.
2012-10-30 12:44:08 +01:00
m5.util.addToPath('../configs/common')
from Caches import *
Update the Memtester, commit a config file/test for it. src/cpu/SConscript: Add memtester to the compilation environment. Someone who knows this better should make the MemTest a cpu model parameter. For now attached with the build of o3 cpu. src/cpu/memtest/memtest.cc: src/cpu/memtest/memtest.hh: Update Memtest for new mem system src/python/m5/objects/MemTest.py: Update memtest python description --HG-- extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
2006-10-09 06:26:10 +02:00
Make memtest work with 8 memtesters src/mem/physical.cc: Update comment to match memtest use src/python/m5/objects/PhysicalMemory.py: Make memtester have a way to connect functionally tests/configs/memtest.py: Properly create 8 memtesters and connect them to the memory system --HG-- extra : convert_revision : e5a2dd9c8918d58051b553b5c6a14785d48b34ca
2006-10-09 23:13:50 +02:00
#MAX CORES IS 8 with the fals sharing method
nb_cores = 8
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
cpus = [ MemTest() for i in xrange(nb_cores) ]
Update the Memtester, commit a config file/test for it. src/cpu/SConscript: Add memtester to the compilation environment. Someone who knows this better should make the MemTest a cpu model parameter. For now attached with the build of o3 cpu. src/cpu/memtest/memtest.cc: src/cpu/memtest/memtest.hh: Update Memtest for new mem system src/python/m5/objects/MemTest.py: Update memtest python description --HG-- extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
2006-10-09 06:26:10 +02:00
# system simulated
cpu: Tidy up the MemTest and make false sharing more obvious The MemTest class really only tests false sharing, and as such there was a lot of old cruft that could be removed. This patch cleans up the tester, and also makes it more clear what the assumptions are. As part of this simplification the reference functional memory is also removed. The regression configs using MemTest are updated to reflect the changes, and the stats will be bumped in a separate patch. The example config will be updated in a separate patch due to more extensive re-work. In a follow-on patch a new tester will be introduced that uses the MemChecker to implement true sharing.
2015-02-11 16:23:28 +01:00
system = System(cpu = cpus,
MEM: Enable multiple distributed generalized memories This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 19:46:31 +02:00
physmem = SimpleMemory(),
mem: Move crossbar default latencies to subclasses This patch introduces a few subclasses to the CoherentXBar and NoncoherentXBar to distinguish the different uses in the system. We use the crossbar in a wide range of places: interfacing cores to the L2, as a system interconnect, connecting I/O and peripherals, etc. Needless to say, these crossbars have very different performance, and the clock frequency alone is not enough to distinguish these scenarios. Instead of trying to capture every possible case, this patch introduces dedicated subclasses for the three primary use-cases: L2XBar, SystemXBar and IOXbar. More can be added if needed, and the defaults can be overridden.
2015-03-02 10:00:47 +01:00
membus = SystemXBar())
power: Add voltage domains to the clock domains This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
2013-08-19 09:52:28 +02:00
# Dummy voltage domain for all our clock domains
system.voltage_domain = VoltageDomain()
system.clk_domain = SrcClockDomain(clock = '1GHz',
voltage_domain = system.voltage_domain)
Update the Memtester, commit a config file/test for it. src/cpu/SConscript: Add memtester to the compilation environment. Someone who knows this better should make the MemTest a cpu model parameter. For now attached with the build of o3 cpu. src/cpu/memtest/memtest.cc: src/cpu/memtest/memtest.hh: Update Memtest for new mem system src/python/m5/objects/MemTest.py: Update memtest python description --HG-- extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
2006-10-09 06:26:10 +02:00
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# Create a seperate clock domain for components that should run at
# CPUs frequency
power: Add voltage domains to the clock domains This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
2013-08-19 09:52:28 +02:00
system.cpu_clk_domain = SrcClockDomain(clock = '2GHz',
voltage_domain = system.voltage_domain)
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
mem: Move crossbar default latencies to subclasses This patch introduces a few subclasses to the CoherentXBar and NoncoherentXBar to distinguish the different uses in the system. We use the crossbar in a wide range of places: interfacing cores to the L2, as a system interconnect, connecting I/O and peripherals, etc. Needless to say, these crossbars have very different performance, and the clock frequency alone is not enough to distinguish these scenarios. Instead of trying to capture every possible case, this patch introduces dedicated subclasses for the three primary use-cases: L2XBar, SystemXBar and IOXbar. More can be added if needed, and the defaults can be overridden.
2015-03-02 10:00:47 +01:00
system.toL2Bus = L2XBar(clk_domain = system.cpu_clk_domain)
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
system.l2c = L2Cache(clk_domain = system.cpu_clk_domain, size='64kB', assoc=8)
MEM: Introduce the master/slave port roles in the Python classes This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-02-13 12:43:09 +01:00
system.l2c.cpu_side = system.toL2Bus.master
Update the Memtester, commit a config file/test for it. src/cpu/SConscript: Add memtester to the compilation environment. Someone who knows this better should make the MemTest a cpu model parameter. For now attached with the build of o3 cpu. src/cpu/memtest/memtest.cc: src/cpu/memtest/memtest.hh: Update Memtest for new mem system src/python/m5/objects/MemTest.py: Update memtest python description --HG-- extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
2006-10-09 06:26:10 +02:00
# connect l2c to membus
MEM: Introduce the master/slave port roles in the Python classes This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-02-13 12:43:09 +01:00
system.l2c.mem_side = system.membus.slave
Update the Memtester, commit a config file/test for it. src/cpu/SConscript: Add memtester to the compilation environment. Someone who knows this better should make the MemTest a cpu model parameter. For now attached with the build of o3 cpu. src/cpu/memtest/memtest.cc: src/cpu/memtest/memtest.hh: Update Memtest for new mem system src/python/m5/objects/MemTest.py: Update memtest python description --HG-- extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
2006-10-09 06:26:10 +02:00
# add L1 caches
for cpu in cpus:
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# All cpus are associated with cpu_clk_domain
cpu.clk_domain = system.cpu_clk_domain
config: Unify caches used in regressions and adjust L2 MSHRs This patch unified the L1 and L2 caches used throughout the regressions instead of declaring different, but very similar, configurations in the different scripts. The patch also changes the default L2 configuration to match what it used to be for the fs and se scripts (until the last patch that updated the regressions to also make use of the cache config). The MSHRs and targets per MSHR are now set to a more realistic default of 20 and 12, respectively. As a result of both the aforementioned changes, many of the regression stats are changed. A follow-on patch will bump the stats.
2012-10-30 12:44:08 +01:00
cpu.l1c = L1Cache(size = '32kB', assoc = 4)
cpu: Tidy up the MemTest and make false sharing more obvious The MemTest class really only tests false sharing, and as such there was a lot of old cruft that could be removed. This patch cleans up the tester, and also makes it more clear what the assumptions are. As part of this simplification the reference functional memory is also removed. The regression configs using MemTest are updated to reflect the changes, and the stats will be bumped in a separate patch. The example config will be updated in a separate patch due to more extensive re-work. In a follow-on patch a new tester will be introduced that uses the MemChecker to implement true sharing.
2015-02-11 16:23:28 +01:00
cpu.l1c.cpu_side = cpu.port
MEM: Introduce the master/slave port roles in the Python classes This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-02-13 12:43:09 +01:00
cpu.l1c.mem_side = system.toL2Bus.slave
Update the Memtester, commit a config file/test for it. src/cpu/SConscript: Add memtester to the compilation environment. Someone who knows this better should make the MemTest a cpu model parameter. For now attached with the build of o3 cpu. src/cpu/memtest/memtest.cc: src/cpu/memtest/memtest.hh: Update Memtest for new mem system src/python/m5/objects/MemTest.py: Update memtest python description --HG-- extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
2006-10-09 06:26:10 +02:00
MEM: Introduce the master/slave port roles in the Python classes This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-02-13 12:43:09 +01:00
system.system_port = system.membus.slave
MEM: Add port proxies instead of non-structural ports Port proxies are used to replace non-structural ports, and thus enable all ports in the system to correspond to a structural entity. This has the advantage of accessing memory through the normal memory subsystem and thus allowing any constellation of distributed memories, address maps, etc. Most accesses are done through the "system port" that is used for loading binaries, debugging etc. For the entities that belong to the CPU, e.g. threads and thread contexts, they wrap the CPU data port in a port proxy. The following replacements are made: FunctionalPort > PortProxy TranslatingPort > SETranslatingPortProxy VirtualPort > FSTranslatingPortProxy --HG-- rename : src/mem/vport.cc => src/mem/fs_translating_port_proxy.cc rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-17 19:55:08 +01:00
Update the Memtester, commit a config file/test for it. src/cpu/SConscript: Add memtester to the compilation environment. Someone who knows this better should make the MemTest a cpu model parameter. For now attached with the build of o3 cpu. src/cpu/memtest/memtest.cc: src/cpu/memtest/memtest.hh: Update Memtest for new mem system src/python/m5/objects/MemTest.py: Update memtest python description --HG-- extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
2006-10-09 06:26:10 +02:00
# connect memory to membus
MEM: Introduce the master/slave port roles in the Python classes This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-02-13 12:43:09 +01:00
system.physmem.port = system.membus.master
Update the Memtester, commit a config file/test for it. src/cpu/SConscript: Add memtester to the compilation environment. Someone who knows this better should make the MemTest a cpu model parameter. For now attached with the build of o3 cpu. src/cpu/memtest/memtest.cc: src/cpu/memtest/memtest.hh: Update Memtest for new mem system src/python/m5/objects/MemTest.py: Update memtest python description --HG-- extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
2006-10-09 06:26:10 +02:00
# -----------------------
# run simulation
# -----------------------
SE/FS: Make SE vs. FS mode a runtime parameter.
2012-01-28 16:24:34 +01:00
root = Root( full_system = False, system = system )
Update the Memtester, commit a config file/test for it. src/cpu/SConscript: Add memtester to the compilation environment. Someone who knows this better should make the MemTest a cpu model parameter. For now attached with the build of o3 cpu. src/cpu/memtest/memtest.cc: src/cpu/memtest/memtest.hh: Update Memtest for new mem system src/python/m5/objects/MemTest.py: Update memtest python description --HG-- extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
2006-10-09 06:26:10 +02:00
root.system.mem_mode = 'timing'
Interesting memtest finally. Get over 500,000 reads on each of 8 testers before memory leak becomes large. tests/configs/memtest.py: Update test to be more interesting --HG-- extra : convert_revision : 4258b798fbeeed2a376f1bfac100a109eb05620e
2006-10-11 07:18:20 +02:00
Reference in a new issue Copy permalink