Commit graph

53 commits

Author SHA1 Message Date
rsc 34295f461a group locks into structs they protect.
few naming nits.
2009-05-31 05:12:21 +00:00
rsc 030a47736f tab police 2009-05-31 00:39:17 +00:00
rsc 19333efb9e Some proc cleanup, moving some of copyproc into allocproc.
Also, an experiment: use "thread-local" storage for c and cp
instead of the #define macro for curproc[cpu()].
2009-05-31 00:28:45 +00:00
kolya deca9fef83 indent 2008-10-15 05:15:32 +00:00
kolya c100d9ee2d cleaner swtch.S 2008-10-15 05:14:10 +00:00
rsc 943fd378a1 Incorporate new understanding of/with Intel SMP spec.
Dropped cmpxchg in favor of xchg, to match lecture notes.

Use xchg to release lock, for future protection and to
keep gcc from acting clever.
2007-10-01 20:43:15 +00:00
rsc ab08960f64 Final word on the locking fiasco?
Change pushcli / popcli so that they can never turn on
interrupts unexpectedly.  That is, if interrupts are on,
then pushcli(); popcli(); turns them off and back on, but
if they are off to begin with, then pushcli(); popcli(); is
a no-op.

I think our fundamental mistake was having a primitive
(release and then popcli nee spllo) that could turn
interrupts on at unexpected moments instead of being
explicit about when we want to start allowing interrupts.

With the new semantics, all the manual fiddling of ncli
to force interrupts off in certain sections goes away.
In return, we must explicitly mark the places where
we want to enable interrupts unconditionally, by calling sti().
There is only one: inside the scheduler loop.
2007-09-27 21:25:37 +00:00
rsc c95bde8163 yank out stack overflow checking ugliness 2007-09-27 20:38:53 +00:00
rsc 4f74de0edc okay, that was long enough - revert 2007-09-27 20:32:45 +00:00
rsc ce2e751555 test: store curproc at top of stack
I don't actually think this is worthwhile, but I figured
I would check it in before reverting it, so that it can
be in the revision history.

Pros:
  * curproc doesn't need to turn on/off interrupts
  * scheduler doesn't have to edit curproc anymore

Cons:
  * it's ugly
  * all the stack computation is more complicated.
  * it doesn't actually simplify anything but curproc,
    and even curproc is harder to follow.
2007-09-27 20:29:50 +00:00
rsc 3807c1f20b rename splhi/spllo to pushcli/popcli 2007-09-27 20:09:40 +00:00
rsc 39c3fb1b15 overkill: use segments to catch stack overflow (delete before next year) 2007-09-27 19:39:10 +00:00
rsc 4721271961 use larger, allocated cpu stacks 2007-09-27 19:32:43 +00:00
rsc c8919e6537 kernel SMP interruptibility fixes.
Last year, right before I sent xv6 to the printer, I changed the
SETGATE calls so that interrupts would be disabled on entry to
interrupt handlers, and I added the nlock++ / nlock-- in trap()
so that interrupts would stay disabled while the hw handlers
(but not the syscall handler) did their work.  I did this because
the kernel was otherwise causing Bochs to triple-fault in SMP
mode, and time was short.

Robert observed yesterday that something was keeping the SMP
preemption user test from working.  It turned out that when I
simplified the lapic code I swapped the order of two register
writes that I didn't realize were order dependent.  I fixed that
and then since I had everything paged in kept going and tried
to figure out why you can't leave interrupts on during interrupt
handlers.  There are a few issues.

First, there must be some way to keep interrupts from "stacking
up" and overflowing the stack.  Keeping interrupts off the whole
time solves this problem -- even if the clock tick handler runs
long enough that the next clock tick is waiting when it finishes,
keeping interrupts off means that the handler runs all the way
through the "iret" before the next handler begins.  This is not
really a problem unless you are putting too many prints in trap
-- if the OS is doing its job right, the handlers should run
quickly and not stack up.

Second, if xv6 had page faults, then it would be important to
keep interrupts disabled between the start of the interrupt and
the time that cr2 was read, to avoid a scenario like:

   p1 page faults [cr2 set to faulting address]
   p1 starts executing trapasm.S
   clock interrupt, p1 preempted, p2 starts executing
   p2 page faults [cr2 set to another faulting address]
   p2 starts, finishes fault handler
   p1 rescheduled, reads cr2, sees wrong fault address

Alternately p1 could be rescheduled on the other cpu, in which
case it would still see the wrong cr2.  That said, I think cr2
is the only interrupt state that isn't pushed onto the interrupt
stack atomically at fault time, and xv6 doesn't care.  (This isn't
entirely hypothetical -- I debugged this problem on Plan 9.)

Third, and this is the big one, it is not safe to call cpu()
unless interrupts are disabled.  If interrupts are enabled then
there is no guarantee that, between the time cpu() looks up the
cpu id and the time that it the result gets used, the process
has not been rescheduled to the other cpu.  For example, the
very commonly-used expression curproc[cpu()] (aka the macro cp)
can end up referring to the wrong proc: the code stores the
result of cpu() in %eax, gets rescheduled to the other cpu at
just the wrong instant, and then reads curproc[%eax].

We use curproc[cpu()] to get the current process a LOT.  In that
particular case, if we arranged for the current curproc entry
to be addressed by %fs:0 and just use a different %fs on each
CPU, then we could safely get at curproc even with interrupts
disabled, since the read of %fs would be atomic with the read
of %fs:0.  Alternately, we could have a curproc() function that
disables interrupts while computing curproc[cpu()].  I've done
that last one.

Even in the current kernel, with interrupts off on entry to trap,
interrupts are enabled inside release if there are no locks held.
Also, the scheduler's idle loop must be interruptible at times
so that the clock and disk interrupts (which might make processes
runnable) can be handled.

In addition to the rampant use of curproc[cpu()], this little
snippet from acquire is wrong on smp:

  if(cpus[cpu()].nlock == 0)
    cli();
  cpus[cpu()].nlock++;

because if interrupts are off then we might call cpu(), get
rescheduled to a different cpu, look at cpus[oldcpu].nlock, and
wrongly decide not to disable interrupts on the new cpu.  The
fix is to always call cli().  But this is wrong too:

  if(holding(lock))
    panic("acquire");
  cli();
  cpus[cpu()].nlock++;

because holding looks at cpu().  The fix is:

  cli();
  if(holding(lock))
    panic("acquire");
  cpus[cpu()].nlock++;

I've done that, and I changed cpu() to complain the first time
it gets called with interrupts disabled.  (It gets called too
much to complain every time.)

I added new functions splhi and spllo that are like acquire and
release but without the locking:

  void
  splhi(void)
  {
    cli();
    cpus[cpu()].nsplhi++;
  }

  void
  spllo(void)
  {
    if(--cpus[cpu()].nsplhi == 0)
      sti();
  }

and I've used those to protect other sections of code that refer
to cpu() when interrupts would otherwise be disabled (basically
just curproc and setupsegs).  I also use them in acquire/release
and got rid of nlock.

I'm not thrilled with the names, but I think the concept -- a
counted cli/sti -- is sound.  Having them also replaces the
nlock++/nlock-- in trap.c and main.c, which is nice.


Final note: it's still not safe to enable interrupts in
the middle of trap() between lapic_eoi and returning
to user space.  I don't understand why, but we get a
fault on pop %es because 0x10 is a bad segment
descriptor (!) and then the fault faults trying to go into
a new interrupt because 0x8 is a bad segment descriptor too!
Triple fault.  I haven't debugged this yet.
2007-09-27 12:58:42 +00:00
rsc 818fc0125e replace setjmp/longjmp with swtch 2007-08-28 12:48:33 +00:00
rsc 07090dd705 Remove struct uinode.
Remove type arg to mknod (assume T_DEV).
2007-08-24 20:54:23 +00:00
rsc 97ac612fb1 nits 2007-08-24 20:28:08 +00:00
rtm 2036534834 add missing iput() at end of _namei() 2007-08-24 14:56:17 +00:00
rsc b1fb19b6df Use parent pointer instead of ppid. 2007-08-23 14:40:30 +00:00
rsc eaea18cb9c PDF at http://am.lcs.mit.edu/~rsc/xv6.pdf
Various changes made while offline.

 + bwrite sector argument is redundant; use b->sector.
 + reformatting of files for nicer PDF page breaks
 + distinguish between locked, unlocked inodes in type signatures
 + change FD_FILE to FD_INODE
 + move userinit (nee proc0init) to proc.c
 + move ROOTDEV to param.h
 + always parenthesize sizeof argument
2007-08-22 06:01:32 +00:00
rsc b6095304b7 Make cp a magic symbol. 2007-08-10 16:37:27 +00:00
rsc 7366e042d9 save process name for debugging 2007-08-08 08:38:11 +00:00
rsc 31085bb416 more comments 2006-09-07 14:12:30 +00:00
rsc 39593d2f1a struct fd -> struct file 2006-09-06 18:38:56 +00:00
rsc f552738889 no /* */ comments 2006-09-06 17:50:20 +00:00
rtm 18432ed5ed nits 2006-08-29 21:35:30 +00:00
rtm 7a37578e9e clear killed flag in exit
idecref cwd in exit
2006-08-29 19:59:52 +00:00
rtm dfcc5b997c prune unneeded panics and debug output 2006-08-29 19:06:37 +00:00
rtm ceb0e42796 proc[0] can sleep(), at least after it gets to main00()
proc[0] calls iget(rootdev, 1) before forking init
2006-08-16 01:56:00 +00:00
rtm 350e63f7a9 no more proc[] entry per cpu for idle loop
each cpu[] has its own gdt and tss
no per-proc gdt or tss, re-write cpu's in scheduler (you win, cliff)
main0() switches to cpu[0].mpstack
2006-08-15 22:18:20 +00:00
kaashoek e958c538fa commented out code for cwd 2006-08-15 15:53:46 +00:00
rtm 5be0039ce9 interrupts could be recursive since lapic_eoi() called before rti
so fast interrupts overflow the kernel stack
fix: cli() before lapic_eoi()
2006-08-10 22:08:14 +00:00
rtm 0e84a0ec6e fix race in holding() check in acquire()
give cpu1 a TSS and gdt for when it enters scheduler()
and a pseudo proc[] entry for each cpu
cpu0 waits for each other cpu to start up
read() for files
2006-08-08 19:58:06 +00:00
rtm 32630628a9 open() 2006-07-29 09:35:02 +00:00
rtm 2927081628 uint32_t -> uint &c 2006-07-20 09:07:53 +00:00
rsc b5f17007f4 standarize on unix-like lowercase struct names 2006-07-17 01:58:13 +00:00
rsc b5ee516575 add uint and standardize on typedefs instead of unsigned 2006-07-17 01:52:13 +00:00
rsc 564f787e91 Eliminate annoying Pseudodesc structure.
Eliminate unnecessary parts of mmu.h.
2006-07-16 16:55:52 +00:00
rsc ef2bd07ae4 standardize on not using foo_ prefix in struct foo 2006-07-16 15:41:47 +00:00
rsc 65bd8e139a New scheduler.
Removed cli and sti stack in favor of tracking
number of locks held on each CPU and explicit
conditionals in spinlock.c.
2006-07-16 01:15:28 +00:00
rtm 46bbd72f3e no more recursive locks
wakeup1() assumes you hold proc_table_lock
sleep(chan, lock) provides atomic sleep-and-release to wait for condition
ugly code in swtch/scheduler to implement new sleep
fix lots of bugs in pipes, wait, and exit
fix bugs if timer interrupt goes off in schedule()
console locks per line, not per byte
2006-07-15 12:03:57 +00:00
rtm 6eb6f10c56 passes both usertests
exit had acquire where I meant release
swtch now checks that you hold no locks
2006-07-12 15:35:33 +00:00
rtm 8148b6ee53 i think my cmpxchg use was wrong in acquire
nesting cli/sti: release shouldn't always enable interrupts
separate setup of lapic from starting of other cpus, so cpu() works earlier
flag to disable locking in console output
make locks work even when curproc==0
(still crashes in clock interrupt)
2006-07-12 11:15:38 +00:00
rtm 4e8f237be8 no more big kernel lock
succeeds at usertests.c pipe test
2006-07-12 01:48:35 +00:00
rtm b548df152b pre-empt both user and kernel, in clock interrupt
usertest.c tests pre-emption
kill()
2006-07-11 17:39:45 +00:00
rsc 5ce9751cab Changes to allow use of native x86 ELF compilers, which on my
Linux 2.4 box using gcc 3.4.6 don't seem to follow the same
conventions as the i386-jos-elf-gcc compilers.
Can run make 'TOOLPREFIX=' or edit the Makefile.

curproc[cpu()] can now be NULL, indicating that no proc is running.
This seemed safer to me than having curproc[0] and curproc[1]
both pointing at proc[0] potentially.

The old implementation of swtch depended on the stack frame layout
used inside swtch being okay to return from on the other stack
(exactly the V6 you are not expected to understand this).
It also could be called in two contexts: at boot time, to schedule
the very first process, and later, on behalf of a process, to sleep
or schedule some other process.

I split this into two functions: scheduler and swtch.

The scheduler is now a separate never-returning function, invoked
by each cpu once set up.  The scheduler looks like:

	scheduler() {
		setjmp(cpu.context);

		pick proc to schedule
		blah blah blah

		longjmp(proc.context)
	}

The new swtch is intended to be called only when curproc[cpu()] is not NULL,
that is, only on behalf of a user proc.  It does:

	swtch() {
		if(setjmp(proc.context) == 0)
			longjmp(cpu.context)
	}

to save the current proc context and then jump over to the scheduler,
running on the cpu stack.

Similarly the system call stubs are now in assembly in usys.S to avoid
needing to know the details of stack frame layout used by the compiler.

Also various changes in the debugging prints.
2006-07-11 01:07:40 +00:00
kaashoek b22d898297 timer interrupts
disk interrupts (assuming bochs has a bug)
2006-07-05 20:00:14 +00:00
rtm 8b4e2a08fe swtch saves callee-saved registers
swtch idles on per-CPU stack, not on calling process's stack
fix pipe bugs
usertest.c tests pipes, fork, exit, close
2006-07-01 21:26:01 +00:00
rtm c41f1de5d4 file descriptors
pipes
2006-06-27 14:35:53 +00:00
rtm df5cc91659 compile "user programs"
curproc array
2006-06-22 20:47:23 +00:00