trap cleanup

IRQ_OFFSET -> T_IRQ0 (a trap number not an IRQ number)
T_SYSCALL 0x30 -> 0x40 (move out of IRQ range)
This commit is contained in:
Russ Cox 2009-07-11 19:24:56 -07:00
parent 887f19686c
commit 2de1c550ca
3 changed files with 7 additions and 7 deletions

View file

@ -62,7 +62,7 @@ ioapicinit(void)
// Mark all interrupts edge-triggered, active high, disabled, // Mark all interrupts edge-triggered, active high, disabled,
// and not routed to any CPUs. // and not routed to any CPUs.
for(i = 0; i <= maxintr; i++){ for(i = 0; i <= maxintr; i++){
ioapicwrite(REG_TABLE+2*i, INT_DISABLED | (IRQ_OFFSET + i)); ioapicwrite(REG_TABLE+2*i, INT_DISABLED | (T_IRQ0 + i));
ioapicwrite(REG_TABLE+2*i+1, 0); ioapicwrite(REG_TABLE+2*i+1, 0);
} }
} }
@ -76,6 +76,6 @@ ioapicenable(int irq, int cpunum)
// Mark interrupt edge-triggered, active high, // Mark interrupt edge-triggered, active high,
// enabled, and routed to the given cpunum, // enabled, and routed to the given cpunum,
// which happens to be that cpu's APIC ID. // which happens to be that cpu's APIC ID.
ioapicwrite(REG_TABLE+2*irq, IRQ_OFFSET + irq); ioapicwrite(REG_TABLE+2*irq, T_IRQ0 + irq);
ioapicwrite(REG_TABLE+2*irq+1, cpunum << 24); ioapicwrite(REG_TABLE+2*irq+1, cpunum << 24);
} }

View file

@ -52,14 +52,14 @@ lapicinit(int c)
return; return;
// Enable local APIC; set spurious interrupt vector. // Enable local APIC; set spurious interrupt vector.
lapicw(SVR, ENABLE | (IRQ_OFFSET+IRQ_SPURIOUS)); lapicw(SVR, ENABLE | (T_IRQ0 + IRQ_SPURIOUS));
// The timer repeatedly counts down at bus frequency // The timer repeatedly counts down at bus frequency
// from lapic[TICR] and then issues an interrupt. // from lapic[TICR] and then issues an interrupt.
// If xv6 cared more about precise timekeeping, // If xv6 cared more about precise timekeeping,
// TICR would be calibrated using an external time source. // TICR would be calibrated using an external time source.
lapicw(TDCR, X1); lapicw(TDCR, X1);
lapicw(TIMER, PERIODIC | (IRQ_OFFSET + IRQ_TIMER)); lapicw(TIMER, PERIODIC | (T_IRQ0 + IRQ_TIMER));
lapicw(TICR, 10000000); lapicw(TICR, 10000000);
// Disable logical interrupt lines. // Disable logical interrupt lines.
@ -72,7 +72,7 @@ lapicinit(int c)
lapicw(PCINT, MASKED); lapicw(PCINT, MASKED);
// Map error interrupt to IRQ_ERROR. // Map error interrupt to IRQ_ERROR.
lapicw(ERROR, IRQ_OFFSET+IRQ_ERROR); lapicw(ERROR, T_IRQ0 + IRQ_ERROR);
// Clear error status register (requires back-to-back writes). // Clear error status register (requires back-to-back writes).
lapicw(ESR, 0); lapicw(ESR, 0);

View file

@ -45,7 +45,7 @@ picinit(void)
outb(IO_PIC1, 0x11); outb(IO_PIC1, 0x11);
// ICW2: Vector offset // ICW2: Vector offset
outb(IO_PIC1+1, IRQ_OFFSET); outb(IO_PIC1+1, T_IRQ0);
// ICW3: (master PIC) bit mask of IR lines connected to slaves // ICW3: (master PIC) bit mask of IR lines connected to slaves
// (slave PIC) 3-bit # of slave's connection to master // (slave PIC) 3-bit # of slave's connection to master
@ -63,7 +63,7 @@ picinit(void)
// Set up slave (8259A-2) // Set up slave (8259A-2)
outb(IO_PIC2, 0x11); // ICW1 outb(IO_PIC2, 0x11); // ICW1
outb(IO_PIC2+1, IRQ_OFFSET + 8); // ICW2 outb(IO_PIC2+1, T_IRQ0 + 8); // ICW2
outb(IO_PIC2+1, IRQ_SLAVE); // ICW3 outb(IO_PIC2+1, IRQ_SLAVE); // ICW3
// NB Automatic EOI mode doesn't tend to work on the slave. // NB Automatic EOI mode doesn't tend to work on the slave.
// Linux source code says it's "to be investigated". // Linux source code says it's "to be investigated".