minix/kernel/arch/earm/bsp/ti/omap_rtc.c
Kees Jongenburger 7e11828c6e arm:create SoC specific bsp directory and move code to there.
Created a new directory called bsp (board support package) to hold
board or system on chip specific code. The idea is the following.

Change-Id: Ica5886806940facae2fa5492fcc938b3c2b989be
2014-02-07 11:14:39 +01:00

56 lines
1.2 KiB
C

/*
* This is a mini driver for the AM335X Real Time Clock. The majority of the
* work is done in user space in readclock, but for power-off the clock needs
* to be put into run mode at the last possible moment in arch_reset.c. This
* driver just implements mapping the memory and re-starting the clock.
*/
#include <assert.h>
#include <sys/types.h>
#include <machine/cpu.h>
#include <minix/type.h>
#include <minix/board.h>
#include <io.h>
#include "kernel/kernel.h"
#include "kernel/proc.h"
#include "kernel/vm.h"
#include "kernel/proto.h"
#include "arch_proto.h"
#include "omap_rtc.h"
#define RTC_SS_BASE 0x44e3e000
#define RTC_SS_SIZE 0x1000
#define RTC_CTRL_REG 0x40
#define RTC_CTRL_RTC_STOP_BIT 0
struct omap_rtc
{
vir_bytes base;
vir_bytes size;
};
static struct omap_rtc omap_rtc = {
.base = RTC_SS_BASE,
.size = RTC_SS_SIZE
};
static kern_phys_map rtc_phys_map;
void
omap3_rtc_init(void)
{
if (BOARD_IS_BB(machine.board_id)) {
kern_phys_map_ptr(omap_rtc.base, omap_rtc.size, &rtc_phys_map,
(vir_bytes) &omap_rtc.base);
}
}
void
omap3_rtc_run(void)
{
if (BOARD_IS_BB(machine.board_id)) {
/* Setting the stop bit starts the RTC running */
mmio_set((omap_rtc.base + RTC_CTRL_REG), (1 << RTC_CTRL_RTC_STOP_BIT));
}
}