Commit graph

150 commits

Author SHA1 Message Date
Cristiano Giuffrida
cb176df60f New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
        /usr/src/etc/system.conf updated to ignore default kernel calls: copy
        it (or merge it) to /etc/system.conf.
        The hello driver (/dev/hello) added to the distribution:
        # cd /usr/src/commands/scripts && make clean install
        # cd /dev && MAKEDEV hello

KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.

PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.

SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.

VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().

RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.

DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.

DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 01:15:29 +00:00
Thomas Veerman
bef0e3eb63 - Add support for the ucontext system calls (getcontext, setcontext,
swapcontext, and makecontext).
- Fix VM to not erroneously think the stack segment and data segment have
  collided when a user-space thread invokes brk().
- Add test51 to test ucontext functionality.
- Add man pages for ucontext system calls.
2010-03-12 15:58:41 +00:00
Ben Gras
0937d6c367 re-establish kernel assert()s.
use the regular <assert.h> assert() instead of vmassert() in
kernel. throw out some #if 0 code. fix a few assert() conditions.
enable by default.
2010-03-10 13:00:05 +00:00
Ben Gras
35a108b911 panic() cleanup.
this change
   - makes panic() variadic, doing full printf() formatting -
     no more NO_NUM, and no more separate printf() statements
     needed to print extra info (or something in hex) before panicing
   - unifies panic() - same panic() name and usage for everyone -
     vm, kernel and rest have different names/syntax currently
     in order to implement their own luxuries, but no longer
   - throws out the 1st argument, to make source less noisy.
     the panic() in syslib retrieves the server name from the kernel
     so it should be clear enough who is panicing; e.g.
         panic("sigaction failed: %d", errno);
     looks like:
         at_wini(73130): panic: sigaction failed: 0
         syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a
   - throws out report() - printf() is more convenient and powerful
   - harmonizes/fixes the use of panic() - there were a few places
     that used printf-style formatting (didn't work) and newlines
     (messes up the formatting) in panic()
   - throws out a few per-server panic() functions
   - cleans up a tie-in of tty with panic()

merging printf() and panic() statements to be done incrementally.
2010-03-05 15:05:11 +00:00
Ben Gras
e6cb76a2e2 no more kprintf - kernel uses libsys printf now, only kputc is special
to the kernel.
2010-03-03 15:45:01 +00:00
Ben Gras
18924ea563 New P_BLOCKEDON for kernel - a macro that encodes the "who is this
process waiting for" logic, which is duplicated a few times in the
kernel. (For a new feature for top.)

Introducing it and throwing out ESRCDIED and EDSTDIED (replaced by
EDEADSRCDST - so we don't have to care which part of the blocking is
failing in system.c) simplifies some code in the kernel and callers that
check for E{DEADSRCDST,ESRCDIED,EDSTDIED}, but don't care about the
difference, a fair bit, and more significantly doesn't duplicate the
'blocked-on' logic.
2010-03-03 15:32:26 +00:00
Kees van Reeuwijk
97c169b93a Remove some unused #include.
Remove some unused variables and computations on them.
2010-02-17 20:24:42 +00:00
Tomas Hruby
c6fec6866f No locking in kernel code
- No locking in RTS_(UN)SET macros

- No lock_notify()

- Removed unused lock_send()

- No lock/unlock macros anymore
2010-02-09 15:26:58 +00:00
Tomas Hruby
728f0f0c49 Removal of the system task
* Userspace change to use the new kernel calls

	- _taskcall(SYSTASK...) changed to _kernel_call(...)

	- int 32 reused for the kernel calls

	- _do_kernel_call() to make the trap to kernel

	- kernel_call() to make the actuall kernel call from C using
	  _do_kernel_call()

	- unlike ipc call the kernel call always succeeds as kernel is
	  always available, however, kernel may return an error

* Kernel side implementation of kernel calls

	- the SYSTEm task does not run, only the proc table entry is
	  preserved

	- every data_copy(SYSTEM is no data_copy(KERNEL

	- "locking" is an empty operation now as everything runs in
	  kernel

	- sys_task() is replaced by kernel_call() which copies the
	  message into kernel, dispatches the call to its handler and
	  finishes by either copying the results back to userspace (if
	  need be) or by suspending the process because of VM

	- suspended processes are later made runnable once the memory
	  issue is resolved, picked up by the scheduler and only at
	  this time the call is resumed (in fact restarted) which does
	  not need to copy the message from userspace as the message
	  is already saved in the process structure.

	- no ned for the vmrestart queue, the scheduler will restart
	  the system calls

	- no special case in do_vmctl(), all requests remove the
	  RTS_VMREQUEST flag
2010-02-09 15:20:09 +00:00
Tomas Hruby
8a03d497b8 System task initialization moved to main()
- the system task initialization code does not really need to be part
  of the system task process. An earlier initialization in kernel is
  cleaner as it does not only initialize the syscalls but also irq
  hooks etc.
2010-02-09 15:12:20 +00:00
Tomas Hruby
8f82633fa2 Removed useless global variable sys_call_code
- we have to same information in the message (m_ptr) where needed
2010-02-03 18:17:01 +00:00
Tomas Hruby
cca24d06d8 This patch removes the global variables who_p and who_e from the
kernel (sys task).  The main reason is that these would have to become
cpu local variables on SMP.  Once the system task is not a task but a
genuine part of the kernel there is even less reason to have these
extra variables as proc_ptr will already contain all neccessary
information. In addition converting who_e to the process pointer and
back again all the time will be avoided.

Although proc_ptr will contain all important information, accessing it
as a cpu local variable will be fairly expensive, hence the value
would be assigned to some on stack local variable. Therefore it is
better to add the 'caller' argument to the syscall handlers to pass
the value on stack anyway. It also clearly denotes on who's behalf is
the syscall being executed.

This patch also ANSIfies the syscall function headers.

Last but not least, it also fixes a potential bug in virtual_copy_f()
in case the check is disabled. So far the function in case of a
failure could possible reuse an old who_p in case this function had
not been called from the system task.

virtual_copy_f() takes the caller as a parameter too. In case the
checking is disabled, the caller must be NULL and non NULL if it is
enabled as we must be able to suspend the caller.
2010-02-03 09:04:48 +00:00
Tomas Hruby
e0f7043e04 No need to use memcpy to copy a message of 36 bytes. The overhead just
to call memcpy is half of the inline copy (using gcc -O)
2010-01-27 09:34:47 +00:00
Kees van Reeuwijk
c8a11b5453 Fixed some type inconsistencies in the kernel. 2010-01-26 12:26:06 +00:00
Kees van Reeuwijk
a7cee5bec4 Removed unused symbols.
Minor cleanups.
2010-01-22 22:01:08 +00:00
David van Moolenbroek
53a6e039de remove SYS_MAPDMA 2010-01-19 21:24:42 +00:00
Cristiano Giuffrida
c5b309ff07 Merge of Wu's GSOC 09 branch (src.20090525.r4372.wu)
Main changes:
- COW optimization for safecopy.
- safemap, a grant-based interface for sharing memory regions between processes.
- Integration with safemap and complete rework of DS, supporting new data types
  natively (labels, memory ranges, memory mapped ranges).
- For further information:
  http://wiki.minix3.org/en/SummerOfCode2009/MemoryGrants

Additional changes not included in the original Wu's branch:
- Fixed unhandled case in VM when using COW optimization for safecopy in case
  of a block that has already been shared as SMAP.
- Better interface and naming scheme for sys_saferevmap and ds_retrieve_map
  calls.
- Better input checking in syslib: check for page alignment when creating
  memory mapping grants.
- DS notifies subscribers when an entry is deleted.
- Documented the behavior of indirect grants in case of memory mapping.
- Test suite in /usr/src/test/safeperf|safecopy|safemap|ds/* reworked
  and extended.
- Minor fixes and general cleanup.
- TO-DO: Grant ids should be generated and managed the way endpoints are to make
sure grant slots are never misreused.
2010-01-14 15:24:16 +00:00
David van Moolenbroek
ac9ab099c8 General cleanup:
- clean up kernel section of minix/com.h somewhat
- remove ALLOCMEM and VM_ALLOCMEM calls
- remove non-safecopy and minix-vmd support from Inet
- remove SYS_VIRVCOPY and SYS_PHYSVCOPY calls
- remove obsolete segment encoding in SYS_SAFECOPY*
- remove DEVCTL call, svrctl(FSDEVUNMAP), map_driverX
- remove declarations of unimplemented svrctl requests
- remove everything related to swapping to disk
- remove floppysetup.sh
- remove traces of rescue device
- update DESCRIBE.sh with new devices
- some other small changes
2010-01-05 19:39:27 +00:00
Cristiano Giuffrida
f4574783dc Rewrite of boot process
KERNEL CHANGES:
- The kernel only knows about privileges of kernel tasks and the root system
process (now RS).
- Kernel tasks and the root system process are the only processes that are made
schedulable by the kernel at startup. All the other processes in the boot image
don't get their privileges set at startup and are inhibited from running by the
RTS_NO_PRIV flag.
- Removed the assumption on the ordering of processes in the boot image table.
System processes can now appear in any order in the boot image table.
- Privilege ids can now be assigned both statically or dynamically. The kernel
assigns static privilege ids to kernel tasks and the root system process. Each
id is directly derived from the process number.
- User processes now all share the static privilege id of the root user
process (now INIT).
- sys_privctl split: we have more calls now to let RS set privileges for system
processes. SYS_PRIV_ALLOW / SYS_PRIV_DISALLOW are only used to flip the
RTS_NO_PRIV flag and allow / disallow a process from running. SYS_PRIV_SET_SYS /
SYS_PRIV_SET_USER are used to set privileges for a system / user process.
- boot image table flags split: PROC_FULLVM is the only flag that has been
moved out of the privilege flags and is still maintained in the boot image
table. All the other privilege flags are out of the kernel now.

RS CHANGES:
- RS is the only user-space process who gets to run right after in-kernel
startup.
- RS uses the boot image table from the kernel and three additional boot image
info table (priv table, sys table, dev table) to complete the initialization
of the system.
- RS checks that the entries in the priv table match the entries in the boot
image table to make sure that every process in the boot image gets schedulable.
- RS only uses static privilege ids to set privileges for system services in
the boot image.
- RS includes basic memory management support to allocate the boot image buffer
dynamically during initialization. The buffer shall contain the executable
image of all the system services we would like to restart after a crash.
- First step towards decoupling between resource provisioning and resource
requirements in RS: RS must know what resources it needs to restart a process
and what resources it has currently available. This is useful to tradeoff
reliability and resource consumption. When required resources are missing, the
process cannot be restarted. In that case, in the future, a system flag will
tell RS what to do. For example, if CORE_PROC is set, RS should trigger a
system-wide panic because the system can no longer function correctly without
a core system process.

PM CHANGES:
- The process tree built at initialization time is changed to have INIT as root
with pid 0, RS child of INIT and all the system services children of RS. This
is required to make RS in control of all the system services.
- PM no longer registers labels for system services in the boot image. This is
now part of RS's initialization process.
2009-12-11 00:08:19 +00:00
David van Moolenbroek
6da61b8f05 fix _NSIG usage 2009-11-28 13:20:50 +00:00
Tomas Hruby
a972f4bacc All macros defining rts flags are prefixed with RTS_
- macros used with RTS_SET group of macros to define struct proc p_rts_flags are
  now prefixed with RTS_ to make things clear
2009-11-10 09:11:13 +00:00
Tomas Hruby
ae75f9d4e5 Removal of the executable flag from files that cannot be executed
- 755 -> 644
2009-11-09 10:26:00 +00:00
David van Moolenbroek
f814fe41be Kernel: add support for indirect grants 2009-11-02 22:30:37 +00:00
David van Moolenbroek
49808dcf77 PM delay call infrastructure improvements
- allow PM to tell sys_runctl() whether to use delay call feature
- only use this feature in PM for delivering signals - not for exits
- do better error checking in PM on sys_runctl() calls
- rename SIGKREADY to SIGNDELAY
2009-10-01 10:36:09 +00:00
David van Moolenbroek
b423d7b477 Merge of David's ptrace branch. Summary:
o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL
o PM signal handling logic should now work properly, even with debuggers
  being present
o Asynchronous PM/VFS protocol, full IPC support for senda(), and
  AMF_NOREPLY senda() flag

DETAILS

Process stop and delay call handling of PM:
o Added sys_runctl() kernel call with sys_stop() and sys_resume()
  aliases, for PM to stop and resume a process
o Added exception for sending/syscall-traced processes to sys_runctl(),
  and matching SIGKREADY pseudo-signal to PM
o Fixed PM signal logic to deal with requests from a process after
  stopping it (so-called "delay calls"), using the SIGKREADY facility
o Fixed various PM panics due to race conditions with delay calls versus
  VFS calls
o Removed special PRIO_STOP priority value
o Added SYS_LOCK RTS kernel flag, to stop an individual process from
  running while modifying its process structure

Signal and debugger handling in PM:
o Fixed debugger signals being dropped if a second signal arrives when
  the debugger has not retrieved the first one
o Fixed debugger signals being sent to the debugger more than once
o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR
  protocol message
o Detached debugger signals from general signal logic and from being
  blocked on VFS calls, meaning that even VFS can now be traced
o Fixed debugger being unable to receive more than one pending signal in
  one process stop
o Fixed signal delivery being delayed needlessly when multiple signals
  are pending
o Fixed wait test for tracer, which was returning for children that were
  not waited for
o Removed second parallel pending call from PM to VFS for any process
o Fixed process becoming runnable between exec() and debugger trap
o Added support for notifying the debugger before the parent when a
  debugged child exits
o Fixed debugger death causing child to remain stopped forever
o Fixed consistently incorrect use of _NSIG

Extensions to ptrace():
o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a
  debugger to and from a process
o Added T_SYSCALL ptrace request, to trace system calls
o Added T_SETOPT ptrace request, to set trace options
o Added TO_TRACEFORK trace option, to attach automatically to children
  of a traced process
o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon
  a successful exec() of the tracee
o Extended T_GETUSER ptrace support to allow retrieving a process's priv
  structure
o Removed T_STOP ptrace request again, as it does not help implementing
  debuggers properly
o Added MINIX3-specific ptrace test (test42)
o Added proper manual page for ptrace(2)

Asynchronous PM/VFS interface:
o Fixed asynchronous messages not being checked when receive() is called
  with an endpoint other than ANY
o Added AMF_NOREPLY senda() flag, preventing such messages from
  satisfying the receive part of a sendrec()
o Added asynsend3() that takes optional flags; asynsend() is now a
  #define passing in 0 as third parameter
o Made PM/VFS protocol asynchronous; reintroduced tell_fs()
o Made PM_BASE request/reply number range unique
o Hacked in a horrible temporary workaround into RS to deal with newly
  revealed RS-PM-VFS race condition triangle until VFS is asynchronous

System signal handling:
o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal
o Removed is-superuser check from PM's do_procstat() (aka getsigset())
o Added sigset macros to allow system processes to deal with the full
  signal set, rather than just the POSIX subset

Miscellaneous PM fixes:
o Split do_getset into do_get and do_set, merging common code and making
  structure clearer
o Fixed setpriority() being able to put to sleep processes using an
  invalid parameter, or revive zombie processes
o Made find_proc() global; removed obsolete proc_from_pid()
o Cleanup here and there

Also included:
o Fixed false-positive boot order kernel warning
o Removed last traces of old NOTIFY_FROM code

THINGS OF POSSIBLE INTEREST

o It should now be possible to run PM at any priority, even lower than
  user processes
o No assumptions are made about communication speed between PM and VFS,
  although communication must be FIFO
o A debugger will now receive incoming debuggee signals at kill time
  only; the process may not yet be fully stopped
o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 09:57:22 +00:00
Ben Gras
9e53925504 save a few lines of unnecessary output. 2009-09-23 13:27:21 +00:00
Ben Gras
cd8b915ed9 Primary goal for these changes is:
- no longer have kernel have its own page table that is loaded
    on every kernel entry (trap, interrupt, exception). the primary
    purpose is to reduce the number of required reloads.
Result:
  - kernel can only access memory of process that was running when
    kernel was entered
  - kernel must be mapped into every process page table, so traps to
    kernel keep working
Problem:
  - kernel must often access memory of arbitrary processes (e.g. send
    arbitrary processes messages); this can't happen directly any more;
    usually because that process' page table isn't loaded at all, sometimes
    because that memory isn't mapped in at all, sometimes because it isn't
    mapped in read-write.
So:
  - kernel must be able to map in memory of any process, in its own
    address space.
Implementation:
  - VM and kernel share a range of memory in which addresses of
    all page tables of all processes are available. This has two purposes:
      . Kernel has to know what data to copy in order to map in a range
      . Kernel has to know where to write the data in order to map it in
    That last point is because kernel has to write in the currently loaded
    page table.
  - Processes and kernel are separated through segments; kernel segments
    haven't changed.
  - The kernel keeps the process whose page table is currently loaded
    in 'ptproc.'
  - If it wants to map in a range of memory, it writes the value of the
    page directory entry for that range into the page directory entry
    in the currently loaded map. There is a slot reserved for such
    purposes. The kernel can then access this memory directly.
  - In order to do this, its segment has been increased (and the
    segments of processes start where it ends).
  - In the pagefault handler, detect if the kernel is doing
    'trappable' memory access (i.e. a pagefault isn't a fatal
     error) and if so,
       - set the saved instruction pointer to phys_copy_fault,
	 breaking out of phys_copy
       - set the saved eax register to the address of the page
	 fault, both for sanity checking and for checking in
	 which of the two ranges that phys_copy was called
	 with the fault occured
  - Some boot-time processes do not have their own page table,
    and are mapped in with the kernel, and separated with
    segments. The kernel detects this using HASPT. If such a
    process has to be scheduled, any page table will work and
    no page table switch is done.

Major changes in kernel are
  - When accessing user processes memory, kernel no longer
    explicitly checks before it does so if that memory is OK.
    It simply makes the mapping (if necessary), tries to do the
    operation, and traps the pagefault if that memory isn't present;
    if that happens, the copy function returns EFAULT.
    So all of the CHECKRANGE_OR_SUSPEND macros are gone.
  - Kernel no longer has to copy/read and parse page tables.
  - A message copying optimisation: when messages are copied, and
    the recipient isn't mapped in, they are copied into a buffer
    in the kernel. This is done in QueueMess. The next time
    the recipient is scheduled, this message is copied into
    its memory. This happens in schedcheck().
    This eliminates the mapping/copying step for messages, and makes
    it easier to deliver messages. This eliminates soft_notify.
  - Kernel no longer creates a page table at all, so the vm_setbuf
    and pagetable writing in memory.c is gone.

Minor changes in kernel are
  - ipc_stats thrown out, wasn't used
  - misc flags all renamed to MF_*
  - NOREC_* macros to enter and leave functions that should not
    be called recursively; just sanity checks really
  - code to fully decode segment selectors and descriptors
    to print on exceptions
  - lots of vmassert()s added, only executed if DEBUG_VMASSERT is 1
2009-09-21 14:31:52 +00:00
David van Moolenbroek
323f0abdd6 Support for setitimer(ITIMER_VIRTUAL/ITIMER_PROF). New test (41) for setitimer. 2009-08-15 21:37:26 +00:00
David van Moolenbroek
b8b8f537bd IPC privileges fixes
Kernel:
o Remove s_ipc_sendrec, instead using s_ipc_to for all send primitives
o Centralize s_ipc_to bit manipulation,
  - disallowing assignment of bits pointing to unused priv structs;
  - preventing send-to-self by not setting bit for own priv struct;
  - preserving send mask matrix symmetry in all cases
o Add IPC send mask checks to SENDA, which were missing entirely somehow
o Slightly improve IPC stats accounting for SENDA
o Remove SYSTEM from user processes' send mask
o Half-fix the dependency between boot image order and process numbers,
  - correcting the table order of the boot processes;
  - documenting the order requirement needed for proper send masks;
  - warning at boot time if the order is violated

RS:
o Add support in /etc/drivers.conf for servers that talk to user processes,
  - disallowing IPC to user processes if no "ipc" field is present
  - adding a special "USER" label to explicitly allow IPC to user processes
o Always apply IPC masks when specified; remove -i flag from service(8)
o Use kernel send mask symmetry to delay adding IPC permissions for labels
  that do not exist yet, adding them to that label's process upon creation
o Add VM to ipc permissions list for rtl8139 and fxp in drivers.conf

Left to future fixes:
o Removal of the table order vs process numbers dependency altogether,
  possibly using per-process send list structures as used for SYSTEM calls
o Proper assignment of send masks to boot processes;
  some of the assigned (~0) masks are much wider than necessary
o Proper assignment of IPC send masks for many more servers in drivers.conf
o Removal of the debugging warning about the now legitimate case where RS's
  add_forward_ipc cannot find the IPC destination's label yet
2009-07-02 16:25:31 +00:00
Ben Gras
9647fbc94e moved type and constants for random data to include file;
added consistency check in random; added source of randomness
internal to random using timing; only retrieve random bins that are full.
2009-04-02 15:24:44 +00:00
Ben Gras
3cc092ff06 . new kernel call sysctl for generic unprivileged system operations;
now used for printing diagnostic messages through the kernel message
   buffer. this lets processes print diagnostics without sending messages
   to tty and log directly, simplifying the message protocol a lot and
   reducing difficulties with deadlocks and other situations in which
   diagnostics are blackholed (e.g. grants don't work). this makes
   DIAGNOSTICS(_S), ASYN_DIAGNOSTICS and DIAG_REPL obsolete, although tty
   and log still accept the codes for 'old' binaries. This also simplifies
   diagnostics in several servers and drivers - only tty needs its own
   kputc() now.
 . simplifications in vfs, and some effort to get the vnode references
   right (consistent) even during shutdown. m_mounted_on is now NULL
   for root filesystems (!) (the original and new root), a less awkward
   special case than 'm_mounted_on == m_root_node'. root now has exactly
   one reference, to root, if no files are open, just like all other
   filesystems. m_driver_e is unused.
2009-01-26 17:43:59 +00:00
Ben Gras
b4934f0e12 debug twiddle. 2009-01-14 08:52:50 +00:00
Ben Gras
23a158b361 don't check senda() buffer if size is 0. 2008-12-21 03:46:42 +00:00
Ben Gras
51fdce1d36 minor fixes 2008-11-19 14:10:33 +00:00
Ben Gras
c078ec0331 Basic VM and other minor improvements.
Not complete, probably not fully debugged or optimized.
2008-11-19 12:26:10 +00:00
Philip Homburg
73ea967b6c Keep track of error statistics, rate limit debug output, added SYS_MAPDMA. 2008-02-22 12:38:22 +00:00
Philip Homburg
6ef2e9b866 Added global variable boottime, prototype for do_stime, and table entry for
SYS_STIME.
2007-08-07 12:21:40 +00:00
Philip Homburg
47233bdf30 Fixed bad boundary condition, support for asynchronous I/O. 2007-04-23 14:23:37 +00:00
Ben Gras
41e9fedf87 Mostly bugfixes of bugs triggered by the test set.
bugfixes:
 SYSTEM:
 . removed
        rc->p_priv->s_flags = 0;
   for the priv struct shared by all user processes in get_priv(). this
   should only be done once. doing a SYS_PRIV_USER in sys_privctl()
   caused the flags of all user processes to be reset, so they were no
   longer PREEMPTIBLE. this happened when RS executed a policy script.
   (this broke test1 in the test set)

 VFS/MFS:
 . chown can change the mode of a file, and chmod arguments are only
   part of the full file mode so the full filemode is slightly magic.
   changed these calls so that the final modes are returned to VFS, so
   that the vnode can be kept up-to-date.
   (this broke test11 in the test set)

 MFS:
 . lookup() checked for sizeof(string) instead of sizeof(user_path),
   truncating long path names
   (caught by test 23)
 . truncate functions neglected to update ctime
   (this broke test16)

 VFS:
 . corner case of an empty filename lookup caused fields of a request
   not to be filled in in the lookup functions, not making it clear
   that the lookup had failed, causing messages to garbage processes,
   causing strange failures.
   (caught by test 30)
 . trust v_size in vnode when doing reads or writes on non-special
   files, truncating i/o where necessary; this is necessary for pipes,
   as MFS can't tell when a pipe has been truncated without it being
   told explicitly each time.
   when the last reader/writer on a pipe closes, tell FS about
   the new size using truncate_vn().
   (this broke test 25, among others)
 . permission check for chdir() had disappeared; added a
   forbidden() call
   (caught by test 23)

new code, shouldn't change anything:
 . introduced RTS_SET, RTS_UNSET, and RTS_ISSET macro's, and their
   LOCK variants. These macros set and clear the p_rts_flags field,
   causing a lot of duplicated logic like

       old_flags = rp->p_rts_flags;            /* save value of the flags */
       rp->p_rts_flags &= ~NO_PRIV;
       if (old_flags != 0 && rp->p_rts_flags == 0) lock_enqueue(rp);

   to change into the simpler

       RTS_LOCK_UNSET(rp, NO_PRIV);

   so the macros take care of calling dequeue() and enqueue() (or lock_*()),
   as the case may be). This makes the code a bit more readable and a
   bit less fragile.
 . removed return code from do_clocktick in CLOCK as it currently
   never replies
 . removed some debug code from VFS
 . fixed grant debug message in device.c
 
preemptive checks, tests, changes:
 . added return code checks of receive() to SYSTEM and CLOCK
 . O_TRUNC should never arrive at MFS (added sanity check and removed
   O_TRUNC code)
 . user_path declared with PATH_MAX+1 to let it be null-terminated
 . checks in MFS to see if strings passed by VFS are null-terminated
 
 IS:
 . static irq name table thrown out
2007-02-01 17:50:02 +00:00
Ben Gras
6f77685609 Split of architecture-dependent and -independent functions for i386,
mainly in the kernel and headers. This split based on work by
Ingmar Alting <iaalting@cs.vu.nl> done for his Minix PowerPC architecture
port.

 . kernel does not program the interrupt controller directly, do any
   other architecture-dependent operations, or contain assembly any more,
   but uses architecture-dependent functions in arch/$(ARCH)/.
 . architecture-dependent constants and types defined in arch/$(ARCH)/include.
 . <ibm/portio.h> moved to <minix/portio.h>, as they have become, for now,
   architecture-independent functions.
 . int86, sdevio, readbios, and iopenable are now i386-specific kernel calls
   and live in arch/i386/do_* now.
 . i386 arch now supports even less 86 code; e.g. mpx86.s and klib86.s have
   gone, and 'machine.protected' is gone (and always taken to be 1 in i386).
   If 86 support is to return, it should be a new architecture.
 . prototypes for the architecture-dependent functions defined in
   kernel/arch/$(ARCH)/*.c but used in kernel/ are in kernel/proto.h
 . /etc/make.conf included in makefiles and shell scripts that need to
   know the building architecture; it defines ARCH=<arch>, currently only
   i386.
 . some basic per-architecture build support outside of the kernel (lib)
 . in clock.c, only dequeue a process if it was ready
 . fixes for new include files

files deleted:
 . mpx/klib.s - only for choosing between mpx/klib86 and -386
 . klib86.s - only for 86

i386-specific files files moved (or arch-dependent stuff moved) to arch/i386/:
 . mpx386.s (entry point)
 . klib386.s
 . sconst.h
 . exception.c
 . protect.c
 . protect.h
 . i8269.c
2006-12-22 15:22:27 +00:00
Ben Gras
7195fe3325 System statistical and call profiling
support by Rogier Meurs <rogier@meurs.org>.
2006-10-30 15:53:38 +00:00
Philip Homburg
4ba5826ba6 Improved access checks in system.c. Grant drivers and FS the rights they need. 2006-08-10 10:56:16 +00:00
Philip Homburg
6f4091eb8c Added do_readbios. Added debugging output for unexpected use of unsafe copy
functions.
2006-07-10 12:27:26 +00:00
Ben Gras
3b814d36d1 Rename paramctl to setgrant. 2006-06-23 15:35:05 +00:00
Ben Gras
002922fa4c New kernel call, SYS_PARAMCTL, that sets parameters of the caller
and is therefore unprivileged. Used to set grant tables.
2006-06-23 15:07:41 +00:00
Ben Gras
d402047222 Added vectored variant of sys_safecopy*. 2006-06-23 11:54:03 +00:00
Ben Gras
bf6fa2acd0 Introduced global sys_call_code to check in called kernel call
implementation functions.

Changed check in system.c to check compile-time-sized bitmap of
kernel calls.

Added SYS_SAFECOPYFROM and SYS_SAFECOPYTO, both mapping to
do_safecopy (that's what sys_call_code is used for).
2006-06-20 09:58:58 +00:00
Philip Homburg
c1da6e6e24 Allow a process to kill itself. Remove the endpoint of a process that kills
itself before reporting the singal to pm.
2006-03-15 12:01:59 +00:00
Ben Gras
0d831b9c22 Don't print anything if anything is wrong in send_sig() 2006-03-09 14:02:56 +00:00
Ben Gras
1335d5d700 'proc number' is process slot, 'endpoint' are generation-aware process
instance numbers, encoded and decoded using macros in <minix/endpoint.h>.

proc number -> endpoint migration
  . proc_nr in the interrupt hook is now an endpoint, proc_nr_e.
  . m_source for messages and notifies is now an endpoint, instead of
    proc number.
  . isokendpt() converts an endpoint to a process number, returns
    success (but fails if the process number is out of range, the
    process slot is not a living process, or the given endpoint
    number does not match the endpoint number in the process slot,
    indicating an old process).
  . okendpt() is the same as isokendpt(), but panic()s if the conversion
    fails. This is mainly used for decoding message.m_source endpoints,
    and other endpoint numbers in kernel data structures, which should
    always be correct.
  . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt()
    get passed the __FILE__ and __LINE__ of the calling lines, and
    print messages about what is wrong with the endpoint number
    (out of range proc, empty proc, or inconsistent endpoint number),
    with the caller, making finding where the conversion failed easy
    without having to include code for every call to print where things
    went wrong. Sometimes this is harmless (wrong arg to a kernel call),
    sometimes it's a fatal internal inconsistency (bogus m_source).
  . some process table fields have been appended an _e to indicate it's
    become and endpoint.
  . process endpoint is stored in p_endpoint, without generation number.
    it turns out the kernel never needs the generation number, except
    when fork()ing, so it's decoded then.
  . kernel calls all take endpoints as arguments, not proc numbers.
    the one exception is sys_fork(), which needs to know in which slot
    to put the child.
2006-03-03 10:00:02 +00:00
Philip Homburg
0b7fcbfd70 Only the memory driver should be allowed access to SYS_IOPENABLE 2005-11-04 17:06:49 +00:00
Ben Gras
2bf8bfe126 Turn IPC warning messages off by default
(because inet deadlocks are normal and will confuse our users).
2005-10-18 16:13:12 +00:00
Ben Gras
61b6139752 Al's system -> kernel call change 2005-10-14 09:13:52 +00:00
Philip Homburg
9bee3f4b08 IOPL, VM, and serial debug output (disabled). 2005-09-30 12:54:59 +00:00
Ben Gras
1d0852bcd4 Enforce system call bitmask 2005-09-20 12:24:19 +00:00
Ben Gras
5ae6f98dea Andy's formatting fixes. 2005-09-11 16:44:06 +00:00
Ben Gras
911ff6a873 Formatting fixes for the book 2005-08-29 16:47:18 +00:00
Ben Gras
d11b2e4b8c Al's double-blank-line removal request 2005-08-22 15:23:47 +00:00
Jorrit Herder
a01645b788 New scheduling code in kernel. Work in progress.
Round-robin within one priority queue works fine.
Ageing algorithm to be done.
2005-08-19 16:43:28 +00:00
Jorrit Herder
b96c389e78 Various small cleanups and comments added. 2005-08-05 09:41:15 +00:00
Jorrit Herder
74711a3b14 Check if kernel calls is allowed (from process' call mask) added. Not yet
enforced. If a call is denied, this will be kprinted. Please report any such
errors, so that I can adjust the mask before returning errors instead of
warnings.

Wrote CMOS driver. All CMOS code from FS has been removed. Currently the
driver only supports get time calls. Set time is left out as an exercise
for the book readers ... startup scripts were updated because the CMOS driver
is needed early on. (IS got same treatment.) Don't forget to run MAKEDEV cmos
in /dev/, otherwise the driver cannot be loaded.
2005-08-04 19:23:03 +00:00
Jorrit Herder
e561081545 Miscellaneous clean ups and fixes to the kernel.
Support for FLOPPY in boot image. (Set controller=fd at boot monitor.)
Moved major device numbers to <minix/dmap.h> (maybe rename to dev.h?)
2005-08-04 09:26:36 +00:00
Jorrit Herder
0946d128cd - Kernel call handlers cleaned up. More strict checking of input parameters.
- Moved generic_handler() from system.c to system/do_irqctl.c.
- Set privileges of system processes somewhat stricter.
2005-07-29 15:26:23 +00:00
Jorrit Herder
d62e515660 Small update to SYS_IRQCTL -> setting an interrupt policy now allows the caller
to provide an index (0 .. 31) that is passed in the HARD_INT message when an
interrupt occurs. The NOTIFY_ARG field contains a bitmap with all indexes for
which an interrupt occured.
2005-07-29 12:44:42 +00:00
Philip Homburg
49c25df569 bios_wini driver 2005-07-29 10:21:04 +00:00
Jorrit Herder
fe0dcb5c00 AT driver is not modified (debugging only);
TTY: select and revive with new notify and FS call back;
kernel: removed old notify code; removed ugly prepare_shutdown timer
kputc: don't send to FS if PRINTF_PROC fails
2005-07-27 14:32:16 +00:00
Jorrit Herder
30d95cad82 Removed debug output. 2005-07-26 14:54:49 +00:00
Jorrit Herder
8866b4d0ef Kernel changes:
- reinstalled priority changing, now in sched() and unready()
- reinstalled check on message buffer in sys_call()
- reinstalled check in send masks in sys_call()
- changed do_fork() to get new privilege structure for SYS_PROCs
- removed some processes from boot image---will be dynamically started later
2005-07-26 12:48:34 +00:00
Jorrit Herder
f0594a9e6d - Fixed comments in various system call handlers. Work in progress on new
sys_privctl() call to dynamically start servers and drivers.

- Shutdown sequence slightly adjusted: called as watchdog timer to let the
  busy sys_abort() call from the PM return first.

- Changed umap_bios() to have more restrictive check: BIOS memory is now
  allowed in BIOS_MEM_BEGIN to END (interrupt vectors) and BASE_MEM_TOP
  to UPPER_MEM_END. Hopefully this keeps QEMU and Bochs happy.
2005-07-21 18:36:40 +00:00
Jorrit Herder
c0718054e9 Various fixes and improvements.
- fixed bug that caused IDLE to panic (irq hook inconsistency);
- kprintf() now accepts multiple arguments; moved to utility.c;
- prepare_shutdown() signals system processes with SIGKSTOP;
- phys_fill() renamed to phys_memset(), argument order changed;
- kmemset() removed in favor of phys_kmemset();
- kstrncpy() removed in favor of phys_copy();
- katoi, kstrncmp replaced by normal library procedure again;
- rm_irq_handler() interface changed (simply pass hook pointer);
2005-07-20 15:25:38 +00:00
Jorrit Herder
1d7bdd4ab1 *** empty log message *** 2005-07-19 15:01:47 +00:00
Jorrit Herder
198c976f7e System processes can be signaled; signals are transformed in SYS_EVENT message
that passes signal map along. This mechanisms is also used for nonuser signals
like SIGKMESS, SIGKSTOP, SIGKSIG.

Revised comments of many system call handlers. Renamed setpriority to nice.
2005-07-19 12:21:36 +00:00
Philip Homburg
7d4e914618 Random number generator 2005-07-18 15:40:24 +00:00
Jorrit Herder
42ab148155 Reorganized system call library; uses separate file per call now.
New configuration header file to include/ exclude functionality.
Extracted privileged features from struct proc and create new struct priv.
Renamed various system calls for readability.
2005-07-14 15:12:12 +00:00
Ben Gras
904cf1f84d A "fix" for bug no. 2 is to check if the process slot has disappeared.
Not a really good solution (as it might not catch situations in which this
is caused by another bug), but the forrest of checks necessary might be worse
than this quick fix - because when looking for the cause, I found some other
cases in which the PM would panic as well. See info in bug 2 for details.

Another fix is to delay notification of PM by SYSTASK of signals delivered
internally until after the reply (e.g. of exec()), because the reply would
be messed up otherwise (receiving the notify instead of reply). This caused
SIGTRAP not to be delivered properly with traced processes.
2005-07-04 15:20:46 +00:00
Ben Gras
3dcb2886ff get/setpriority() and fsync() system calls 2005-07-01 18:01:33 +00:00
Ben Gras
2ce80ece5c Fix to check for RDTSC instruction (above 486), and call another timing
function instead if RDTSC is unavailable. This makes minix run on 486
again :) (presumably lower as well).
2005-07-01 09:39:47 +00:00
Jorrit Herder
bac6068857 Rewrite of process scheduling:
- current and maximum priority per process;
- quantum size and current ticks left per process;
- max number of full quantums in a row allow
  (otherwise current priority is decremented)
2005-06-30 15:55:19 +00:00
Jorrit Herder
a408699ce0 Cleaned up process table structure: removed p_type, p_pendcount.
Removed stop sequence when MINIX is shut down.
Disabled send mask checks --- to be replaced by proper mechanism.
Fixed bug relating to 'shutdown -x'.
Simplified clock accounting of realtime.
Updated Makefiles for mkdept script.
2005-06-24 16:24:40 +00:00
Jorrit Herder
355a10864b Fixed various GCC compiler warnings for the kernel.
Only main() now gives a warning about the return type (GCC wants an int).
2005-06-21 10:47:46 +00:00
Jorrit Herder
7279bb68ef Applied MINIX 2.0.4 pathes provides by Al Woodhull. 2005-06-17 13:00:04 +00:00
Jorrit Herder
e0a98a4d65 * Fixed bug relating to nested locking in interrupt handlers. The nested lock
caused interrupts to be reenabled (due to unlock), which caused a race. The
problems were especially visible on slower machines.
* Relocated free memory parsing to process manager. This saved quite some
code at the kernel level. Text size was reduced by about 650 bytes.
* Removed locks for updating the realtime in the clock's main loop and the
get_uptime function. Interrupts are no longer reentrant, so realtime is
immediately updated.
2005-06-17 09:09:54 +00:00
Ben Gras
cde16504a1 check relaxation for bios memory 2005-06-06 11:54:58 +00:00
Jorrit Herder
f2a85e58d9 Various updates.
* Removed some variants of the SYS_GETINFO calls from the kernel;
  replaced them with new PM and utils libary functionality. Fixed
  bugs in utils library that used old get_kenv() variant.
* Implemented a buffer in the kernel to gather random data.
  Memory driver periodically checks this for /dev/random.
  A better random algorithm can now be implemented in the driver.
  Removed SYS_RANDOM; the SYS_GETINFO call is used instead.
* Remove SYS_KMALLOC from the kernel. Memory allocation can now
  be done at the process manager with new 'other' library functions.
2005-06-03 13:55:06 +00:00
Ben Gras
c977bd8709 Added args to lock() and unlock() to tell them apart, for use
when lock timing is enabled in minix/config.h.

Added phys_zero() routine to klib386.s that zeroes a range of memory, and
added corresponding system call.
2005-06-01 09:37:52 +00:00
Jorrit Herder
0165662cd9 Replaced flagalrm() timers with another technique to check for timeouts.
This allowed removing the p_flagarlm timer from the kernel's process table.
Furthermore, I merged p_syncalrm and p_signalrm into p_alarm_timer to save
even more space. Note that processes can no longer have both a signal and
synchronous alarm timer outstanding as of now.
2005-05-31 14:43:04 +00:00
Jorrit Herder
322ec9ef8b Moved stime, time, times POSIX calls from FS to PM. Removed child time
accounting from kernel (now in PM).  Large amount of files in this commit
is due to system time problems during development.
2005-05-31 09:50:51 +00:00
Jorrit Herder
826fee4c6d Fixed clear_proc(): properly release resources (IRQ hooks, notify buffers);
Cleaned up comments in proc.c (old code still present for comparison);
2005-05-30 11:05:42 +00:00
Jorrit Herder
c2be104821 Improved NOTIFY system: fixed a minor error, ignore pending notifications
on SENDREC system calls. To be done: resource (buffer pool) management;
make it structurally impossible to run out of buffers.
2005-05-27 12:44:14 +00:00
Jorrit Herder
77c3213948 Optimized scheduling code. Old code is still available withing DEAD_CODE
and NEW_SCHED_Q definitions. Some minor problems are being traced at the
moment. This commit is meant to backup my files.
  --- Jorrit
2005-05-26 13:17:57 +00:00
Jorrit Herder
0899f82ab2 Fixed some minor issues with the NOTIFY call. 2005-05-24 14:35:58 +00:00
Ben Gras
6a3519f3a8 Added 2 checks to mapping function - one for overflow (virtual address +
size wraparound), one to see if the size fits in the designated segment.

It seems this check wasn't done. This came to light when trying to pre-check
the users buffer for read() and write() in using the vectored virtual
copy system call in servers/fs/read.c.
2005-05-24 12:30:29 +00:00
Jorrit Herder
ccd17ecfed New NOTIFY system call! Queued at kernel. Duplicate messages (with same source
and type) are overwritten with newer flags/ arguments. The interface from
within the kernel is lock_notify(). User processes can make a system call with
notify(). NOTIFY fully replaces the old notification mechanism.
2005-05-24 10:06:17 +00:00
Jorrit Herder
307c825515 New NOTIFY trap (IPC call) to send queued notification messages.
The call works. Permission check, restriction of outstanding notifications
to be added. Low level code to make it work from within interrupt handlers
will be added as well.
2005-05-19 14:05:51 +00:00
Jorrit Herder
614f49b557 Fixed some comments and reorganized some code.
Fixed minor bug in notify() function.
2005-05-18 10:36:23 +00:00
Ben Gras
d0c3e8f818 . added rm_irq_handler which un-links an irq handler from the linked
list of handlers, callable by irqctl system call
 . workaround for hanging keyboard bug after shutdown.. if key is pressed
   during or after shutdown procedure, keyboard stops working. It looks like
   irq 1 gets stuck high if no keyboard reading is done (e.g. because the
   irq is masked or tty driver has exited). Workaround is to leave irqs
   enabled until the last second, and call shutdown() immediately after the
   last driver has stopped (tty task). This way the chance of an unserviced
   interrupt occuring is negligible.
2005-05-12 16:06:37 +00:00
Jorrit Herder
ab39ce451b Fixed some system call checks;
Added SYS_PHYSVCOPY system call;
Fixed IRQ hooks dump in IS server;
2005-05-10 11:06:24 +00:00
Jorrit Herder
ac0995259d *** empty log message *** 2005-05-02 14:30:04 +00:00
Jorrit Herder
89ac678b9b *** empty log message *** 2005-04-29 15:36:43 +00:00
Ben Gras
9865aeaa79 Initial revision 2005-04-21 14:53:53 +00:00