Commit graph

70 commits

Author SHA1 Message Date
Tomas Hruby
78793f4f38 pproc_addr unused and removed 2009-09-15 09:57:54 +00:00
Tomas Hruby
2e293ce7c0 system_init() renamed to arch_init()
- a better name for architecture specific init function

- some of x86 init code must execute in protected mode

- prot_init() removed from this function and still called in cstart() Imho this
  should be called from the architecture specific assembly not cstart. cstart
  perform Minix monitor specific tasks and will be touched once another
  bootloader is in use, e.g. booting via tftp, therefore we keep it as is for
  now.

- this is a backport from the SMP code which requires this. Merging will be simpler
2009-08-30 14:55:30 +00:00
David van Moolenbroek
b8b8f537bd IPC privileges fixes
Kernel:
o Remove s_ipc_sendrec, instead using s_ipc_to for all send primitives
o Centralize s_ipc_to bit manipulation,
  - disallowing assignment of bits pointing to unused priv structs;
  - preventing send-to-self by not setting bit for own priv struct;
  - preserving send mask matrix symmetry in all cases
o Add IPC send mask checks to SENDA, which were missing entirely somehow
o Slightly improve IPC stats accounting for SENDA
o Remove SYSTEM from user processes' send mask
o Half-fix the dependency between boot image order and process numbers,
  - correcting the table order of the boot processes;
  - documenting the order requirement needed for proper send masks;
  - warning at boot time if the order is violated

RS:
o Add support in /etc/drivers.conf for servers that talk to user processes,
  - disallowing IPC to user processes if no "ipc" field is present
  - adding a special "USER" label to explicitly allow IPC to user processes
o Always apply IPC masks when specified; remove -i flag from service(8)
o Use kernel send mask symmetry to delay adding IPC permissions for labels
  that do not exist yet, adding them to that label's process upon creation
o Add VM to ipc permissions list for rtl8139 and fxp in drivers.conf

Left to future fixes:
o Removal of the table order vs process numbers dependency altogether,
  possibly using per-process send list structures as used for SYSTEM calls
o Proper assignment of send masks to boot processes;
  some of the assigned (~0) masks are much wider than necessary
o Proper assignment of IPC send masks for many more servers in drivers.conf
o Removal of the debugging warning about the now legitimate case where RS's
  add_forward_ipc cannot find the IPC destination's label yet
2009-07-02 16:25:31 +00:00
Arun Thomas
db4faccbf9 -Installation info is on the wiki now, so remove setup guides and update
README.
-Remove obsolete FAT partitioning utility.
-Update startup banner.
2009-05-14 15:54:02 +00:00
Ben Gras
e3ca89c0be more sanity checking. sanity checking disabled by default.
give every process a full pagetable by default now.

first step to disabling kernel page table code (processes
might not have page tables -> no address translation).
2009-05-12 11:35:01 +00:00
Ben Gras
9647fbc94e moved type and constants for random data to include file;
added consistency check in random; added source of randomness
internal to random using timing; only retrieve random bins that are full.
2009-04-02 15:24:44 +00:00
Ben Gras
c27008fbcc cprofile not conditional 2009-01-09 21:44:52 +00:00
Ben Gras
c4fb567bd5 . replace HZ by runtime system_hz (sysenv variable 'hz')
. new flag PROC_FULLVM in table indicating process wants full address
   space (this is then created and managed by VM)
2008-12-11 14:15:23 +00:00
Ben Gras
c078ec0331 Basic VM and other minor improvements.
Not complete, probably not fully debugged or optimized.
2008-11-19 12:26:10 +00:00
Philip Homburg
8937b6a8de Initialize s_ipc_sendrec. 2007-04-23 13:46:54 +00:00
Ben Gras
a2d3b518d8 rename svn revision variable to one with underscore, to not pollute
application namespace
2007-03-30 15:17:32 +00:00
Ben Gras
31c62a7347 include svn revision number in <minix/sys_config.h>, printed by kernel
at startup, to easily identify releases.
2007-03-21 13:35:06 +00:00
Ben Gras
41e9fedf87 Mostly bugfixes of bugs triggered by the test set.
bugfixes:
 SYSTEM:
 . removed
        rc->p_priv->s_flags = 0;
   for the priv struct shared by all user processes in get_priv(). this
   should only be done once. doing a SYS_PRIV_USER in sys_privctl()
   caused the flags of all user processes to be reset, so they were no
   longer PREEMPTIBLE. this happened when RS executed a policy script.
   (this broke test1 in the test set)

 VFS/MFS:
 . chown can change the mode of a file, and chmod arguments are only
   part of the full file mode so the full filemode is slightly magic.
   changed these calls so that the final modes are returned to VFS, so
   that the vnode can be kept up-to-date.
   (this broke test11 in the test set)

 MFS:
 . lookup() checked for sizeof(string) instead of sizeof(user_path),
   truncating long path names
   (caught by test 23)
 . truncate functions neglected to update ctime
   (this broke test16)

 VFS:
 . corner case of an empty filename lookup caused fields of a request
   not to be filled in in the lookup functions, not making it clear
   that the lookup had failed, causing messages to garbage processes,
   causing strange failures.
   (caught by test 30)
 . trust v_size in vnode when doing reads or writes on non-special
   files, truncating i/o where necessary; this is necessary for pipes,
   as MFS can't tell when a pipe has been truncated without it being
   told explicitly each time.
   when the last reader/writer on a pipe closes, tell FS about
   the new size using truncate_vn().
   (this broke test 25, among others)
 . permission check for chdir() had disappeared; added a
   forbidden() call
   (caught by test 23)

new code, shouldn't change anything:
 . introduced RTS_SET, RTS_UNSET, and RTS_ISSET macro's, and their
   LOCK variants. These macros set and clear the p_rts_flags field,
   causing a lot of duplicated logic like

       old_flags = rp->p_rts_flags;            /* save value of the flags */
       rp->p_rts_flags &= ~NO_PRIV;
       if (old_flags != 0 && rp->p_rts_flags == 0) lock_enqueue(rp);

   to change into the simpler

       RTS_LOCK_UNSET(rp, NO_PRIV);

   so the macros take care of calling dequeue() and enqueue() (or lock_*()),
   as the case may be). This makes the code a bit more readable and a
   bit less fragile.
 . removed return code from do_clocktick in CLOCK as it currently
   never replies
 . removed some debug code from VFS
 . fixed grant debug message in device.c
 
preemptive checks, tests, changes:
 . added return code checks of receive() to SYSTEM and CLOCK
 . O_TRUNC should never arrive at MFS (added sanity check and removed
   O_TRUNC code)
 . user_path declared with PATH_MAX+1 to let it be null-terminated
 . checks in MFS to see if strings passed by VFS are null-terminated
 
 IS:
 . static irq name table thrown out
2007-02-01 17:50:02 +00:00
Ben Gras
6f77685609 Split of architecture-dependent and -independent functions for i386,
mainly in the kernel and headers. This split based on work by
Ingmar Alting <iaalting@cs.vu.nl> done for his Minix PowerPC architecture
port.

 . kernel does not program the interrupt controller directly, do any
   other architecture-dependent operations, or contain assembly any more,
   but uses architecture-dependent functions in arch/$(ARCH)/.
 . architecture-dependent constants and types defined in arch/$(ARCH)/include.
 . <ibm/portio.h> moved to <minix/portio.h>, as they have become, for now,
   architecture-independent functions.
 . int86, sdevio, readbios, and iopenable are now i386-specific kernel calls
   and live in arch/i386/do_* now.
 . i386 arch now supports even less 86 code; e.g. mpx86.s and klib86.s have
   gone, and 'machine.protected' is gone (and always taken to be 1 in i386).
   If 86 support is to return, it should be a new architecture.
 . prototypes for the architecture-dependent functions defined in
   kernel/arch/$(ARCH)/*.c but used in kernel/ are in kernel/proto.h
 . /etc/make.conf included in makefiles and shell scripts that need to
   know the building architecture; it defines ARCH=<arch>, currently only
   i386.
 . some basic per-architecture build support outside of the kernel (lib)
 . in clock.c, only dequeue a process if it was ready
 . fixes for new include files

files deleted:
 . mpx/klib.s - only for choosing between mpx/klib86 and -386
 . klib86.s - only for 86

i386-specific files files moved (or arch-dependent stuff moved) to arch/i386/:
 . mpx386.s (entry point)
 . klib386.s
 . sconst.h
 . exception.c
 . protect.c
 . protect.h
 . i8269.c
2006-12-22 15:22:27 +00:00
Ben Gras
7195fe3325 System statistical and call profiling
support by Rogier Meurs <rogier@meurs.org>.
2006-10-30 15:53:38 +00:00
Philip Homburg
62cb625f1b Removed superfluous assignment to text_base. Reported by Ildar Ismagilov. 2006-08-28 14:59:55 +00:00
Ben Gras
2e89eb5270 Change allowed kernel call bitmap to an array of bitmaps to allow
any number of kernel calls.

Allowed kernel calls are stored in table.c for every image process as a
variably-sized array of allowed calls. This is used to fill the bitmap
of size determined at compile time by the number of kernel calls. This
filling is done by main.c. There is a special call called SYS_ALL_CALLS
which fills the bitmap of allowed calls completely, if that is the only
entry in the array.
2006-06-20 09:56:06 +00:00
Philip Homburg
15b8fe54a8 Better initialization of the memory map of processes that are part of the
image. Removed NO_MAP flag.
2006-05-11 14:49:46 +00:00
Ben Gras
eae250dea4 . load average calculation changed to calculate it all over every tick
instead of keeping a running total of enqueued processes
   (because somehow the load average was broken)
 . added SI_KPROC_TAB to get a copy of kernel process table from PM, for
   a top implementation
 . fixed arg to sys_nice() to make it an endpoint, not a slot number
2006-03-16 09:33:35 +00:00
Jorrit Herder
021e3234d8 Jorrit's ... "progress?" 2006-03-10 16:10:05 +00:00
Ben Gras
1335d5d700 'proc number' is process slot, 'endpoint' are generation-aware process
instance numbers, encoded and decoded using macros in <minix/endpoint.h>.

proc number -> endpoint migration
  . proc_nr in the interrupt hook is now an endpoint, proc_nr_e.
  . m_source for messages and notifies is now an endpoint, instead of
    proc number.
  . isokendpt() converts an endpoint to a process number, returns
    success (but fails if the process number is out of range, the
    process slot is not a living process, or the given endpoint
    number does not match the endpoint number in the process slot,
    indicating an old process).
  . okendpt() is the same as isokendpt(), but panic()s if the conversion
    fails. This is mainly used for decoding message.m_source endpoints,
    and other endpoint numbers in kernel data structures, which should
    always be correct.
  . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt()
    get passed the __FILE__ and __LINE__ of the calling lines, and
    print messages about what is wrong with the endpoint number
    (out of range proc, empty proc, or inconsistent endpoint number),
    with the caller, making finding where the conversion failed easy
    without having to include code for every call to print where things
    went wrong. Sometimes this is harmless (wrong arg to a kernel call),
    sometimes it's a fatal internal inconsistency (bogus m_source).
  . some process table fields have been appended an _e to indicate it's
    become and endpoint.
  . process endpoint is stored in p_endpoint, without generation number.
    it turns out the kernel never needs the generation number, except
    when fork()ing, so it's decoded then.
  . kernel calls all take endpoints as arguments, not proc numbers.
    the one exception is sys_fork(), which needs to know in which slot
    to put the child.
2006-03-03 10:00:02 +00:00
Ben Gras
87f2236ad2 load average measurement implementation, accessable through
getloadavg() system call in the library.
2005-11-14 15:50:46 +00:00
Ben Gras
4fc5f85a88 Corrected correction of clock's 2005-10-06 10:21:24 +00:00
Ben Gras
293e1ea70d Missing comma 2005-10-06 09:39:36 +00:00
Ben Gras
b46a51cfd6 Semidefinitive copyright statement. 2005-10-06 09:38:55 +00:00
Jorrit Herder
32c05f45c6 Minor bug fixes in proc.c and utility.c;
Removed debug dumps on panic from main.c;
Return error on exit when other process does IPC to/from exiting process.
2005-10-05 09:51:50 +00:00
Ben Gras
15c6f7182b Al's comment fixes 2005-10-02 19:02:05 +00:00
Ben Gras
b2dd3ff593 New copyright statement. 2005-09-23 22:10:11 +00:00
Ben Gras
5ae6f98dea Andy's formatting fixes. 2005-09-11 16:44:06 +00:00
Ben Gras
c655d8b3ae Added shutdown_started global variable. If it's set, we're in the
process of doing a shutdown.

Initial purpose is - suppress dead process diagnostic message.
2005-09-08 14:31:23 +00:00
Ben Gras
75781d7c7b 1-second-delayed-shutdown reinstated to fix shutdown mess; possible now due
to boot monitor cooperation.
2005-09-07 16:42:31 +00:00
Jorrit Herder
5cb414f4d5 Reverted PH copyright to 1987-2001. 2005-08-23 13:10:12 +00:00
Jorrit Herder
b4d7de6ee1 New makefile (src/tools/Makefile) logic:
- make fresh install: still builds new everything (libraries, services, image)
- make clean image: only builds new boot image (about 5 sec. now!)
2005-08-23 12:53:35 +00:00
Ben Gras
d11b2e4b8c Al's double-blank-line removal request 2005-08-22 15:23:47 +00:00
Jorrit Herder
872687ddfc Scheduling updates to the kernel. Sched() function now is single point for
policy. Actual policy not yet implemented.

PM calculates nice values for processes in boot image.

IS debug dumps improved (Shift+F1-F4).
2005-08-22 15:14:11 +00:00
Jorrit Herder
a01645b788 New scheduling code in kernel. Work in progress.
Round-robin within one priority queue works fine.
Ageing algorithm to be done.
2005-08-19 16:43:28 +00:00
Ben Gras
bfb7608412 various small fixes.
. motd update (ast)
 . made /usr/local/man/man* and made them bin-owned (mtree)
   (to let bin install there)
 . made copyright notice in kernel 1987-2006 (ast)
 . added chown -R bin /usr/src so that bin can compile everything
2005-08-08 14:34:10 +00:00
Jorrit Herder
941b5ebd1c Fix to device table at FS.
BIOS and AT installed in /sbin.
Floppy boot fixed.
2005-08-05 18:57:20 +00:00
Jorrit Herder
1c570a7d93 Second try to fix tick delay problem ... 2005-08-05 17:02:37 +00:00
Jorrit Herder
74711a3b14 Check if kernel calls is allowed (from process' call mask) added. Not yet
enforced. If a call is denied, this will be kprinted. Please report any such
errors, so that I can adjust the mask before returning errors instead of
warnings.

Wrote CMOS driver. All CMOS code from FS has been removed. Currently the
driver only supports get time calls. Set time is left out as an exercise
for the book readers ... startup scripts were updated because the CMOS driver
is needed early on. (IS got same treatment.) Don't forget to run MAKEDEV cmos
in /dev/, otherwise the driver cannot be loaded.
2005-08-04 19:23:03 +00:00
Jorrit Herder
89cf745fe2 Single boot driver loaded, while multiple can be included in the boot image.
The user needs to set label=... to choose the driver of his or her choice.
This driver will be mapped onto the controller that is set in controller=...

Minor cleanup of kernel source code (boot image table now is static).
2005-08-03 16:06:35 +00:00
Jorrit Herder
375f6f8754 Miscellaneous cleanups. 2005-08-03 11:53:36 +00:00
Jorrit Herder
b69ca94efb Fixed 'bug' in log driver that caused kernel messages not to be displayed.
This was caused by a change in the shared driver code. Not log's fault.

Renamed #definitions of driver process numbers, e.g., TTY now is TTY_PROC_NR.
All known (special) processes now have consistent naming scheme. Kernel tasks
don't follow this scheme.
2005-08-03 08:14:08 +00:00
Jorrit Herder
0946d128cd - Kernel call handlers cleaned up. More strict checking of input parameters.
- Moved generic_handler() from system.c to system/do_irqctl.c.
- Set privileges of system processes somewhat stricter.
2005-07-29 15:26:23 +00:00
Jorrit Herder
fe0dcb5c00 AT driver is not modified (debugging only);
TTY: select and revive with new notify and FS call back;
kernel: removed old notify code; removed ugly prepare_shutdown timer
kputc: don't send to FS if PRINTF_PROC fails
2005-07-27 14:32:16 +00:00
Jorrit Herder
8866b4d0ef Kernel changes:
- reinstalled priority changing, now in sched() and unready()
- reinstalled check on message buffer in sys_call()
- reinstalled check in send masks in sys_call()
- changed do_fork() to get new privilege structure for SYS_PROCs
- removed some processes from boot image---will be dynamically started later
2005-07-26 12:48:34 +00:00
Jorrit Herder
f0594a9e6d - Fixed comments in various system call handlers. Work in progress on new
sys_privctl() call to dynamically start servers and drivers.

- Shutdown sequence slightly adjusted: called as watchdog timer to let the
  busy sys_abort() call from the PM return first.

- Changed umap_bios() to have more restrictive check: BIOS memory is now
  allowed in BIOS_MEM_BEGIN to END (interrupt vectors) and BASE_MEM_TOP
  to UPPER_MEM_END. Hopefully this keeps QEMU and Bochs happy.
2005-07-21 18:36:40 +00:00
Jorrit Herder
c0718054e9 Various fixes and improvements.
- fixed bug that caused IDLE to panic (irq hook inconsistency);
- kprintf() now accepts multiple arguments; moved to utility.c;
- prepare_shutdown() signals system processes with SIGKSTOP;
- phys_fill() renamed to phys_memset(), argument order changed;
- kmemset() removed in favor of phys_kmemset();
- kstrncpy() removed in favor of phys_copy();
- katoi, kstrncmp replaced by normal library procedure again;
- rm_irq_handler() interface changed (simply pass hook pointer);
2005-07-20 15:25:38 +00:00
Jorrit Herder
198c976f7e System processes can be signaled; signals are transformed in SYS_EVENT message
that passes signal map along. This mechanisms is also used for nonuser signals
like SIGKMESS, SIGKSTOP, SIGKSIG.

Revised comments of many system call handlers. Renamed setpriority to nice.
2005-07-19 12:21:36 +00:00
Jorrit Herder
42ab148155 Reorganized system call library; uses separate file per call now.
New configuration header file to include/ exclude functionality.
Extracted privileged features from struct proc and create new struct priv.
Renamed various system calls for readability.
2005-07-14 15:12:12 +00:00