Commit graph

72 commits

Author SHA1 Message Date
Kees Jongenburger
4dafcd9245 build:also build the hello driver on arm.
Change-Id: I5dd82d3b56b907bfc137313f503f9d9c52c199ef
2014-07-28 17:05:21 +02:00
David van Moolenbroek
760f3d62d7 PTY: split off from TTY
Requires recreation of /dev/tty[pq]*, /dev/pty[pq]* device nodes.

Change-Id: I0e5a28d82faa934497fd3b97d619e506bcb5f439
2014-07-28 17:05:12 +02:00
Lionel Sambuc
84d9c625bf Synchronize on NetBSD-CVS (2013/12/1 12:00:00 UTC)
- Fix for possible unset uid/gid in toproto
 - Fix for default mtree style
 - Update libelf
 - Importing libexecinfo
 - Resynchronize GCC, mpc, gmp, mpfr
 - build.sh: Replace params with show-params.
     This has been done as the make target has been renamed in the same
     way, while a new target named params has been added. This new
     target generates a file containing all the parameters, instead of
     printing it on the console.
 - Update test48 with new etc/services (Fix by Ben Gras <ben@minix3.org)
     get getservbyport() out of the inner loop

Change-Id: Ie6ad5226fa2621ff9f0dee8782ea48f9443d2091
2014-07-28 17:05:06 +02:00
David van Moolenbroek
b003ed0929 UDS: split off from PFS
Change-Id: I769cbd64aa6e5e85a797caf0f8bbb4c20e145263
2014-03-01 09:04:57 +01:00
David van Moolenbroek
6b3f4dc157 Input infrastructure, INPUT server, PCKBD driver
This commit separates the low-level keyboard driver from TTY, putting
it in a separate driver (PCKBD). The commit also separates management
of raw input devices from TTY, and puts it in a separate server
(INPUT). All keyboard and mouse input from hardware is sent by drivers
to the INPUT server, which either sends it to a process that has
opened a raw input device, or otherwise forwards it to TTY for
standard processing.

Design by Dirk Vogt. Prototype by Uli Kastlunger.

Additional changes made to the prototype:

- the event communication is now based on USB HID codes; all input
  drivers have to use USB codes to describe events;
- all TTY keymaps have been converted to USB format, with the effect
  that a single keymap covers all keys; there is no (static) escaped
  keymap anymore;
- further keymap tweaks now allow remapping of literally all keys;
- input device renumbering and protocol rewrite;
- INPUT server rewrite, with added support for cancel and select;
- PCKBD reimplementation, including PC/AT-to-USB translation;
- support for manipulating keyboard LEDs has been added;
- keyboard and mouse multiplexer devices have been added to INPUT,
  primarily so that an X server need only open two devices;
- a new "libinputdriver" library abstracts away protocol details from
  input drivers, and should be used by all future input drivers;
- both INPUT and PCKBD can be restarted;
- TTY is now scheduled by KERNEL, so that it won't be punished for
  running a lot; without this, simply running "yes" on the console
  kills the system;
- the KIOCBELL IOCTL has been moved to /dev/console;
- support for the SCANCODES termios setting has been removed;
- obsolete keymap compression has been removed;
- the obsolete Olivetti M24 keymap has been removed.

Change-Id: I3a672fb8c4fd566734e4b46d3994b4b7fc96d578
2014-03-01 09:04:55 +01:00
David van Moolenbroek
36ac0dbcf8 Take LOG out of the boot image
Change-Id: Id2629776b53aae46629b04a42c15cbbacac9b949
2014-03-01 09:04:55 +01:00
David van Moolenbroek
6989311826 Add VND driver, providing loopback devices
Change-Id: I40fa695e28c67477a75383e6f1550e451afcab41
2014-03-01 09:04:54 +01:00
Thomas Cort
471dc65ada bmp085: driver for the BMP085 temp&pressure sensor
Change-Id: I5c297a7f4f8cea2549e537df30a5c7bf5b9d8b51
2013-08-22 16:54:03 -04:00
Thomas Cort
3bdd1ae659 sht21: driver for the SHT21 humidity & temp sensor
Change-Id: Ia71168e394a7b260019e74973db6c9d75d3d4482
2013-08-22 16:53:57 -04:00
Thomas Cort
845aabfe65 tsl2550: driver for the TSL2550 light sensor
Change-Id: I9e1c87132404509ffec8bf22a8c6cc993df1aa73
2013-08-22 16:53:49 -04:00
Thomas Cort
bab2a34e1b tps65950: driver for the TPS65950 PMIC
Change-Id: I6b6163e59233d1f823f03550b949d53e1738a7f4
2013-08-09 12:41:43 +02:00
Thomas Cort
d9b62047f1 tps65217: driver for the TPS65217 PMIC
Change-Id: Ic2259c15645816627d757c9c45560cb4c5c0156c
2013-08-05 10:22:59 -04:00
Thomas Cort
09db2a8c67 readclock: add support for am335x RTC
Add support for getting/setting the am335x SoC's internal real
time clock. Also, allow the power off alarm to be set.

Make readclock an "always on" driver. This is needed for setting
power-off alarms whenever the power button is pressed on the BBB.

Replace the readclock.sh script & single run driver with a
readclock program that takes the same arguments and forwards
the requests on to the always up readclock driver.

Change-Id: Ifd6c2acd80ae4b5e79d83df510df445c24e24a71
2013-08-05 08:37:51 -04:00
Michal Maka
29ecfde5ef Lan8710 driver initial version, after first review
Change-Id: If00cf1e098da5875eb040f8765273a6fa5e43e33
2013-08-04 21:31:05 +00:00
Thomas Cort
1b78e86fb8 tda19988: driver for the TDA19988 HDMI Transmitter
Change-Id: Ia7750df3dd4ec4bd68624c800a0241c70eea7ca4
2013-07-29 12:38:01 -04:00
Thomas Cort
526eb34144 cat24c256: driver for the cat24c256 i2c eeprom
Change-Id: I682d136c80fc868d3f0a5edb0cf6c33c0f3a28ea
2013-07-15 17:03:18 -04:00
Thomas Cort
550fdfb443 i2c: initial bus drivers for am335x and dm37xx
Change-Id: I478704fbf30dbf6d3382bcbfb11e75b512c032a1
2013-07-15 11:11:13 -04:00
Thomas Veerman
ba49a155b5 fb: introduce framebuffer support to Minix
This patch introduces a framebuffer to Minix. It's written for the ARM
port of Minix, but has an architectural split that separates the
hardware dependent part from the non-hardware dependent part. Futhermore,
this driver was developed using a screen that has a native resolution of
1024x600 pixels and having lack of support for obtaining EDID from the
screen. Consequently, it uses a hardcoded resolution of 1024x600.

The driver uses an interface based on the Linux ioctl API, but supports
only a very limited subset.
2013-02-21 10:29:08 +00:00
Ben Gras
1f6e0c8fa6 drivers: build random for arm too
Change-Id: I801643281fdacc6cb7950cc79a29bec28dcf40ec
2013-02-09 17:13:16 +01:00
Kees Jongenburger
e641d42a37 gpio:Initial GPIO driver.(ARM)
Small GPIO driver that exports a few pins using a virtual file
system. Currently the two user leds and the user button are exported.

Change-Id: I001d017ae27cd17b635587873f7da981054da459
2013-01-28 15:51:20 +01:00
Thomas Veerman
a5f7ba46f5 Also build and install log for ARM 2013-01-25 17:07:02 +00:00
Arne Welzel
d19844d69c virtio: virtio-net driver 2013-01-23 09:03:03 +00:00
Arne Welzel
a27b60af75 virtio: virtio-blk driver 2013-01-23 09:03:03 +00:00
Lionel Sambuc
b1c4ba4ab6 ARM updates
Due to the ABI we are using we have to use the earm architecture
moniker for the build system to behave correctly. This involves
then some headers to move around.

There is also a few related Makefile updates as well as minor
source code corrections.
2013-01-17 10:03:58 +01:00
Lionel Sambuc
9152e1c5a7 Upgrading build system to new NetBSD revision
The tested targets are the followgin ones:
 * tools
 * distribution
 * sets
 * release

The remaining NetBSD targets have not been disabled nor tested
*at all*. Try them at your own risk, they may reboot the earth.

For all compliant Makefiles, objects and generated files are put in
MAKEOBJDIR, which means you can now keep objects between two branch
switching. Same for DESTDIR, please refer to build.sh options.

Regarding new or modifications of Makefiles a few things:
 * Read share/mk/bsd.README
 * If you add a subdirectory, add a Makefile in it, and have it called
   by the parent through the SUBDIR variable.
 * Do not add arbitrary inclusion which crosses to another branch of
   the hierarchy; If you can't do without it, put a comment on why.
   If possible, do not use inclusion at all.
 * Use as much as possible the infrastructure, it is here to make
   life easier, do not fight it.

Sets and package are now used to track files.
We have one set called "minix", composed of one package called "minix-sys"
2012-11-15 16:07:29 +01:00
Kees Jongenburger
de291cdb60 mmc:driver development added dummy driver.
* Add dummy driver to allow independent testing of mmcblk.
* Always build the mmc driver to prevent breakage.
* Allow to specify the mmc driver to be used at load time.

Change-Id: I4e14b912fb8f3612e252864b53733968b23ac023
2012-10-19 14:55:03 +02:00
Thomas Veerman
39dfb2bc55 Don't build ext2 ramdisk for cross compilation
. as mkfs.mfs is now cross compilable, we can remove the ext2 ramdisk
  special case for cross compilation.
2012-06-18 10:54:56 +00:00
Thomas Veerman
03ea1c1676 Dynamically determine which ramdisk to use
.Also, rename ext2_ramdisk to ramdisk_ext2.
2012-06-18 10:53:36 +00:00
Dirk Vogt
ed4df03113 Include ext2 ramdisk in build and remove sync
As the ramdisk and ext2 ramdisk don't build anything for the install
and all targets, memory does not have to wait for them anymore.
2012-06-18 10:53:26 +00:00
Ben Gras
511c977f93 retire bios_wini 2012-04-12 03:02:21 +02:00
David van Moolenbroek
e7db2d3588 Add fbd -- Faulty Block Device driver
This driver can be loaded as an overlay on top of a real block
device, and can then be used to generate block-level failures for
certain transfer requests. Specifically, a rule-based system allows
the user to introduce (overt and silent) data corruption and errors.

It exposes itself through /dev/fbd, and a file system can be mounted
on top of it. The new fbdctl(8) tool can be used to control the
driver; see ``man fbdctl'' for details. It also comes with a test
set, located in test/fbdtest.
2011-12-11 22:45:46 +01:00
David van Moolenbroek
0aa01a2dce Add vbox -- VirtualBox time sync driver
Sets time forward to match the host time.

Started automatically if the corresponding device is present.
2011-11-23 18:15:43 +01:00
Ben Gras
b1eba81b9d simplify build logic a bit
. always compile acpi, with clang, so never have
	  build/clean inconsistencies; can be enabled (i.e. run
	  at boot time) by setting acpi variable in the boot monitor
	. always strip binaries with the right strip cmd, so never
	  have ack/elf strip inconsistencies
2011-11-18 17:11:17 +01:00
Arun Thomas
3eb22ca4d1 MK option to build only system image programs 2011-07-20 09:57:46 +02:00
David van Moolenbroek
7a9e3651fd drivers/sb16: delete altogether; the latest copy is in drivers/audio/sb16 2011-03-25 10:48:16 +00:00
Tomas Hruby
9560b6dea8 ACPI driver
- 99% of the code is Intel's ACPICA. The license is compliant with BSD
  and GNU and virtually all systems that use ACPI use this code, For
  instance it is part of the Linux kernel.

- The only minix specific files are

  acpi.c
  osminixxf.c
  platform/acminix.h

  and

  include/minix/acpi.h

- At the moment the driver does not register interrupt hooks which I
  believe is mainly for handling PnP, events like "battery level is
  low" and power management. Should not be difficult to add it if need
  be.

- The interface to the outside world is virtually non-existent except
  a trivial message based service for PCI driver to query which device
  is connected to what IRQ line. This will evolve as more components
  start using this driver. VM, Scheduler and IOMMU are the possible
  users right now.

- because of dependency on a native 64bit (long long, part of c99) it
  is compiled only with a gnu-like compilers which in case of Minix
  includes gcc llvm-gcc and clang
2010-09-02 15:44:04 +00:00
David van Moolenbroek
16f2eb25f4 AHCI driver 2010-08-05 16:37:58 +00:00
Arun Thomas
c0c8d25799 Rename mkfiles from minix.*.mk to bsd.*.mk
Makes things easier for pkgsrc
2010-06-25 18:29:09 +00:00
Arun Thomas
b48b037fbe Reorganize some directories
servers/hgfs/hgfs_server => servers/hgfs
servers/hgfs/libhgfs => lib/libhgfs
servers/rs/service => commands/service
drivers/memory/memory_driver => drivers/memory
drivers/memory/ramdisk => drivers/ramdisk
2010-05-26 22:49:57 +00:00
Arun Thomas
436d6012a3 Convert drivers/ and servers/ over to bsdmake
-Move libdriver to lib/
-Install all boot image services on filesystem to aid restartability
2010-03-22 21:25:22 +00:00
Cristiano Giuffrida
cb176df60f New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
        /usr/src/etc/system.conf updated to ignore default kernel calls: copy
        it (or merge it) to /etc/system.conf.
        The hello driver (/dev/hello) added to the distribution:
        # cd /usr/src/commands/scripts && make clean install
        # cd /dev && MAKEDEV hello

KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.

PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.

SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.

VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().

RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.

DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.

DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 01:15:29 +00:00
Ben Gras
76f8132545 dec21140A ethernet driver for virtualpc, contributed by nicolas tittley. 2010-01-26 10:20:18 +00:00
David van Moolenbroek
3537a7b59d Compile and install e1000 driver by default 2010-01-15 10:22:34 +00:00
David van Moolenbroek
1489f14b37 Driver for Attansic L2 FastEthernet (atl2) 2009-12-30 22:42:44 +00:00
Ben Gras
207621b6fb rtl8169 driver contributed by Jaswinder Singh Rajput. 2009-12-02 15:59:42 +00:00
David van Moolenbroek
be2087ecf9 Filter driver by Wu Bingzheng et al 2009-12-02 10:08:58 +00:00
David van Moolenbroek
30a7fe5fa9 libdriver changes:
- remove obsolete non-safecopy support
- merge libdriver and libdriver_asyn
- change standard reply model from sendnb to senda
2009-12-02 09:57:48 +00:00
Philip Homburg
9d41dbc55e Build libdriver_asyn for target image 2008-02-25 14:38:09 +00:00
Philip Homburg
9d176133ee Added libdriver_asyn and amddev 2008-02-25 12:07:48 +00:00
Ben Gras
45744bff41 Connect new audio drivers to build. 2007-11-23 11:53:33 +00:00