Commit graph

871 commits

Author SHA1 Message Date
Ben Gras
b538531449 vm: make WARNS=5 proof
Change-Id: I737ded223daf04f1c0c85a2e8e6b36c8fdcd07db
2013-09-06 11:51:20 +02:00
Thomas Cort
0a9eab0bb6 gpio: port to am335x
* port libgpio to am335x.
 * increase NR_IRQ to 16 to avoid too many IRQs requested error.
 * move gpio binary to /sbin (that's where mount looks for drivers).
 * fix bug that re-enabled banks that were disabled due to bad revision.
 * fix padconf masks for dm37xx in gpio driver (should be 16-bit).
 * fix a few typos in README.txt and comments.

Change-Id: I32374415a97135174c5224f76374a870909fa90c
2013-09-03 08:14:18 -04:00
Thomas Cort
4593804bf0 kernel: add padconf kernel call
On the AM335X, writes to the padconf registers must be done in privileged
mode. To allow userspace drivers to dynamically change the padconf at
runtime, a kernel call has been added.

Change-Id: I4b25d2879399b1785a360912faa0e90b5c258533
2013-08-28 12:53:05 -04:00
Ben Gras
c8f3b10909 fix a few more minix specific warnings
. also disable stack protection feature for gcc,
	  causes build errors for pkgsrc gcc on minix

Change-Id: I1c6e2bcb4d948098d642543d7b2711284ee55c72
2013-08-27 16:16:03 +00:00
Thomas Cort
471dc65ada bmp085: driver for the BMP085 temp&pressure sensor
Change-Id: I5c297a7f4f8cea2549e537df30a5c7bf5b9d8b51
2013-08-22 16:54:03 -04:00
Thomas Cort
3bdd1ae659 sht21: driver for the SHT21 humidity & temp sensor
Change-Id: Ia71168e394a7b260019e74973db6c9d75d3d4482
2013-08-22 16:53:57 -04:00
Thomas Cort
845aabfe65 tsl2550: driver for the TSL2550 light sensor
Change-Id: I9e1c87132404509ffec8bf22a8c6cc993df1aa73
2013-08-22 16:53:49 -04:00
Ben Gras
6e5a113837 a bit more -Werror compatability
for clang, fix warnings in drivers/, lib/, servers/, sys/, common/.
by turning off fatal warnings (takes effect if the default is on),
fixing warnings or reducing the warning level.

Change-Id: Ia1b4bc877c879ba783158081b59aa6ebb021a50f
2013-08-20 11:37:40 +02:00
David van Moolenbroek
4cd78c64a4 libnetdriver: only block datalink messages
Previously, all incoming messages would be blocked before a DL_CONF
message arrives from the TCP/IP stack. This however makes it impossible
for a driver to process interrupts before the DL_CONF initialization.
This patch blocks only datalink messages before the initial DL_CONF,
and lets through all other messages to the driver.

Change-Id: I89988958c0bff9bb38e0379b66f6142491a67b61
2013-08-18 12:09:51 +02:00
Thomas Cort
99e91dab2f mmio: add 16-bit variants of read/write/set
Change-Id: If4fb5585865768daa151bd4aa343ac5c84d2e9c3
2013-08-13 16:29:22 -04:00
Thomas Cort
6405d78182 readclock/tda19988: fix compiler/cppcheck warnings
readclock:
 - the setup function for readclock on i386 was missing a return.
 - the message field for RTCDEV_GRANT wasn't the right type.

tda19988:
 - position variable was used without being initialized.

Change-Id: I3f78dd0a9d44f35eb38cb7da0974909f066b7007
2013-08-10 14:36:10 -04:00
Thomas Cort
bab2a34e1b tps65950: driver for the TPS65950 PMIC
Change-Id: I6b6163e59233d1f823f03550b949d53e1738a7f4
2013-08-09 12:41:43 +02:00
David van Moolenbroek
8e87bd84b4 Remove VM_VFS_REPLY from VM_BASIC_CALLS
Change-Id: I0a03f1c95fd7ef87cecb01a028f59696a8447738
2013-08-08 23:23:13 +02:00
David van Moolenbroek
78d707cd26 VM: support for shared call mask ACLs
The VM server now manages its call masks such that all user processes
share the same call mask. As a result, an update for the call mask of
any user process will apply to all user processes. This is similar to
the privilege infrastructure employed by the kernel, and may serve as
a template for similar fine-grained restrictions in other servers.

Concretely, this patch fixes the problem of "service edit init" not
applying the given VM call mask to user processes started from RC
scripts during system startup.

In addition, this patch makes RS set a proper VM call mask for each
recovery script it spawns.

Change-Id: I520a30d85a0d3f3502d2b158293a2258825358cf
2013-08-08 23:22:58 +02:00
David van Moolenbroek
c19c805d3b Add VM_GETRUSAGE to VM_BASIC_CALLS
This unbreaks test75.

Change-Id: I71539f941b9a4ee5e7f57de2ee9adaeab4d2730e
2013-08-08 23:22:54 +02:00
Antoine Leca
521de2a716 Env_memory_parse: move into VM
Only possible user of that function.
While here, fix bug about NR_MEMS vs MAXMEMMAP
NR_MEMS=16 is currently less than MAXMEMMAP=40; avoid overriding
2013-08-07 16:30:27 +00:00
Antoine Leca
cfc36e5fd3 Drop obsolete <minix/compiler.h> and <minix/crtso.h>
Change-Id: I05da32bd2bdf014b6fd5c39d6e808d3c73812dc0
2013-08-07 16:28:39 +00:00
Lukasz Hryniuk
06154a34a4 Some more 64bit function eradication.
. Replace 64bit funcions with operators in arch_clock.c
  . Replace 64bit funcions with operators in proc.c
  . Replace 64bit funcions with operators in vbox.c
  . Replace 64bit funcions with operators in driver.c
  . Eradicates is_zero64, make_zero64, neg64

Change-Id: Ie4e1242a73534f114725271b2e2365b2004cb7b9
2013-08-07 12:35:53 +00:00
Antoine Leca
da82f9b2e8 <a.out.h>, MINIX style: remove as obsolete
Change-Id: Icc8b7210d60a93ac9cc4610d676dcba270756410
2013-08-06 11:43:35 +02:00
Thomas Cort
09db2a8c67 readclock: add support for am335x RTC
Add support for getting/setting the am335x SoC's internal real
time clock. Also, allow the power off alarm to be set.

Make readclock an "always on" driver. This is needed for setting
power-off alarms whenever the power button is pressed on the BBB.

Replace the readclock.sh script & single run driver with a
readclock program that takes the same arguments and forwards
the requests on to the always up readclock driver.

Change-Id: Ifd6c2acd80ae4b5e79d83df510df445c24e24a71
2013-08-05 08:37:51 -04:00
Thomas Cort
437177b028 i2c: increase BUFLEN/CMDLEN to 128, add page flag.
128 byte reads are much more common than 32 byte reads. The message
passing + setup/teardown for a read is much more expensive, in terms
of time, than the reading itself. A slightly bigger struct is well
worth the time savings. This reduces read times for /dev/eeprom
from 57 seconds per 4KB to 14 seconds.

Additionally, make sending the page address in the eeprom driver
and utility optional. This can save a little time when reading
within the same page and allows support for smaller devices that
don't support pages (example: chips containing EDID).

Change-Id: Ie48087caee40c11fa241d1555fce9309ddd27b43
2013-07-27 08:21:37 -04:00
Thomas Cort
526eb34144 cat24c256: driver for the cat24c256 i2c eeprom
Change-Id: I682d136c80fc868d3f0a5edb0cf6c33c0f3a28ea
2013-07-15 17:03:18 -04:00
Thomas Cort
8a643e5128 libi2cdriver: library for i2c device drivers
Change-Id: Ib6d5617e4b62e0bc5b25e6fa92b44baf536b1961
2013-07-15 17:02:57 -04:00
Thomas Cort
550fdfb443 i2c: initial bus drivers for am335x and dm37xx
Change-Id: I478704fbf30dbf6d3382bcbfb11e75b512c032a1
2013-07-15 11:11:13 -04:00
Xiaoguang Sun
64f10ee644 Implement getrusage
Implement getrusage.
These fields of struct rusage are not supported and always set to zero at this time
long ru_nswap;           /* swaps */
long ru_inblock;         /* block input operations */
long ru_oublock;         /* block output operations */
long ru_msgsnd;          /* messages sent */
long ru_msgrcv;          /* messages received */
long ru_nvcsw;           /* voluntary context switches */
long ru_nivcsw;          /* involuntary context switches */

test75.c is the unit test for this new function

Change-Id: I3f1eb69de1fce90d087d76773b09021fc6106539
2013-07-01 23:00:47 +02:00
Ben Gras
456359aa72 retire 64-bit conversion functions
Change-Id: Ib6b81403f877c363a286c654e0524fa1cb781b80
2013-06-24 16:50:57 +02:00
Thomas Cort
ba92d5219d clkconf: move clkconf from libgpio to it's own lib
Clock configuration will be needed by other/future subsystems such as i2c.
Extract the functionality from libgpio and put it into it's own library.

Change-Id: I6f6de0b3fb4d305ddfeac74123b78c983d1318dd
2013-06-18 09:09:23 +02:00
Ben Gras
5bc48ef12e kernel, libsys: make it arm-target-independent
. by making the address and frequency of the
	  free running clock kinfo members, set at runtime
	  in the kernel, instead of compile time constants
	  in libsys

Change-Id: I4a8387302d4d3ffd47d2448525725683a74c9a4f
2013-06-17 09:55:36 +02:00
Ben Gras
9e43052b21 inline sendnb should not call send vector
. also vfs has to reply to a vm call - so use asynsend for that

Change-Id: I30ac1e591191dea5c99e25b03151a4415d1151b0
2013-06-12 07:04:53 +00:00
Qi Yong
c50a22578e remove vm_yield_block_get_block leftovers. 2013-06-01 20:51:31 +08:00
Ben Gras
4f3b015903 fix some warnings
Change-Id: I1f3fa582d8e3ddb3c981784dddb13e740102f4f3
2013-05-31 20:57:39 +00:00
Ben Gras
33a7ac7557 vfs: mmap support
. libc: add vfs_mmap, a way for vfs to initiate mmap()s.
	  This is a good special case to have as vfs is a slightly
	  different client from regular user processes. It doesn't do it
	  for itself, and has the dev & inode info already so the callback
	  to VFS for the lookup isn't necessary. So it has different info
	  to have to give to VM.
	. libc: also add minix_mmap64() that accepts a 64-bit offset, even
	  though our off_t is still 32 bit now.
	. On exec() time, try to mmap() in the executable if available.
	  (It is not yet available in this commit.)
	. To support mmap(), add do_vm_call that allows VM to lookup
	  (to ino+dev), do i/o from and close FD's on behalf of other
	  processes.

Change-Id: I831551e45a6781c74313c450eb9c967a68505932
2013-05-31 15:42:00 +00:00
Ben Gras
2d2a1a077d panic: declare as printf-style-checked
. and related fixes

Change-Id: I5131ac57dc53d8aec8d421a34c5ceea383404d7a
2013-05-31 13:35:25 +00:00
Kees Jongenburger
a3f6529ee2 arm:vm header cleanup. 2013-05-16 20:39:19 +02:00
Ben Gras
80846c4a79 kernel ipc debug: various fixes
. add receive hooks in the kernel to print asynchronously
	  delivered messages
	. do not rely on MF_REPLY_PEND to decide between calls and errors,
	  as that isn't reliable for asynchronous messages; try both instead
	. add _sendcall() that extract-mfield.sh can then reliably recognize
	  the fields for messages that are sent with just send()
	. add DEBUG_DUMPIPC_NAMES to restrict printed messages to
	  from/to given process names

Change-Id: Ia65eb02a69a2b58e73bf9f009987be06dda774a3
2013-05-01 21:40:23 +00:00
Ben Gras
85fd078707 tty: non-overlapping code for FKEY_CONTROL
. to decode it in kernel/debug.c

Change-Id: I0d2cc66e87d97a362fa549b364b4d1b0e1225e66
2013-05-01 21:36:43 +00:00
Kees Jongenburger
e6bac75a8b ARM:Rename ARM_BIG_PAGE to ARM_SECTION.
The natural term to use when talking about MINIX big pages on ARM
is SECTION. A section is a level 1 page table entry pointing to
a 1MB area.

Change-Id: I9bd27ca99bc772126c31c27a537b1415db20c4a6
2013-04-29 11:42:26 +02:00
Ben Gras
f0cc010614 libminixfs, mfs, ext2: may re-evaluate cache size
libminixfs may now be informed of changes to the block usage on the
filesystem. if the net change becomes big enough, libminixfs may
resize the cache based on the new usage.

	. update the 2 FSes to provide this information to libminixfs

Change-Id: I158815a11da801fd5572a8de89c9e6c039b82650
2013-04-26 13:57:08 +00:00
Ben Gras
44f34e53d5 VFS: Implement REQ_BPEEK.
This commit introduces a new request type called REQ_BPEEK. It
requests minor device blocks from the FS.  Analogously to REQ_PEEK,
it requests the filesystem to get the requested blocks into its
cache, without actually copying the result anywhere.

Change-Id: If1d06645b0e17553a64b3167091e9d12efeb3d6f
2013-04-24 10:18:16 +00:00
Ben Gras
49eb1f4806 vm: new secondary cache code
Primary purpose of change: to support the mmap implementation, VM must
know both (a) about some block metadata for FS cache blocks, i.e.
inode numbers and inode offsets where applicable; and (b) know about
*all* cache blocks, i.e.  also of the FS primary caches and not just
the blocks that spill into the secondary one. This changes the
interface and VM data structures.

This change is only for the interface (libminixfs) and VM data
structures; the filesystem code is unmodified, so although the
secondary cache will be used as normal, blocks will not be annotated
with inode information until the FS is modified to provide this
information. Until it is modified, mmap of files will fail gracefully
on such filesystems.

This is indicated to VFS/VM by returning ENOSYS for REQ_PEEK.

Change-Id: I1d2df6c485e6c5e89eb28d9055076cc02629594e
2013-04-24 10:18:16 +00:00
Ben Gras
9e88c40e40 VM: 64-bit mmap()
Some (backwards-compatible) changes in mmap() call message fields
that allow for a 64-bit offset. minix_mmap() takes an off_t and
minix_mmap64() takes a u64_t. Some mmap() work in VM goes into a
separate function, using the new fields, so that that can be re-used
when files are to be mapped (future commit).

Change-Id: Ifb77a90b593dd3c33cf81b396068e4da1ec5fb1c
2013-04-24 10:18:15 +00:00
Ben Gras
adf2032bc0 vm: remove secondary cache code
This commit removes the secondary cache code implementation from
VM and its usage from libminixfs. It is to be replaced by a new
implementation.

Change-Id: I8fa3af06330e7604c7e0dd4cbe39d3ce353a05b1
2013-04-24 10:18:10 +00:00
Ben Gras
32a4e0d84d many new tests
. test70: regression test for m_out vfs race condition

The following tests use testcache.c to generate test i/o
patterns, generate random write data and verify the reads.

	. test71: blackbox full-stack test of FS operation, testing
	  using the regular VFS interface crazy i/o patterns
	  with various working set sizes, triggering only
	  primary cache, also secondary cache, and finally
	  disk i/o and verifying contents all the time
	. test72: unit test of libminixfs, implementing
	  functions it needs from -lsys and -lblockdriver
	  and the client in order to simulate a working
	  cache client and backend environment.
	. test73: blackbox test of secondary vm cache in isolation

Change-Id: I1287e9753182b8719e634917ad158e3c1e079ceb
2013-04-19 16:21:48 +00:00
Antoine Leca
9131e98a7d utimens(2) system call
Variant of utime(2) with struct timespec (with ns precision)
instead of time_t values; also allows for tv_nsec members
the values UTIME_NOW (force update to current time) or
UTIME_OMIT (allow to set either atim or mtim independently.)

Provides a superset of utimes(2), futimes(2), lutimes(2),
and futimens(2).
Provides the same subset of utimensat(2) as does NetBSD 6.
Also import utimens() and lutimeNS() from NetBSD-current.
2013-04-12 18:55:39 +00:00
Kees Jongenburger
88414c568c cleanup:misc documentation fix. 2013-04-12 20:52:58 +02:00
Kees Jongenburger
7015c66bfa arm:increase the amount of interrup vectors
Increase the amount of interrup vectors in preparation for the AM335X.
2013-04-12 20:52:57 +02:00
Antoine Leca
4069cef7f9 Subsecond timestamps support for FS
Expand REQ_UTIME to include tv_nsec members
(as in struct timespec) in addition to tv_sec==time_t

Designed with help from David van Moolenbroek
2013-04-12 11:11:59 +02:00
Lionel Sambuc
dd6b239665 Removing include/minix/limits.h
This files defines two constants which are only used through
sys/syslimits. So they where moved there instead of including the file
and it was removed.

Change-Id: Iba3d220144dddf5d6411a6c66e2f223a1aafb50f
2013-04-09 16:43:02 +02:00
Thomas Cort
516fec97d9 libc: add clock_settime() system call.
This also adds the sys_settime() kernel call which allows for the adjusting
of the clock named realtime in the kernel. The existing sys_stime()
function is still needed for a separate job (setting the boottime). The
boottime is set in the readclock driver. The sys_settime() interface is
meant to be flexible and will support both clock_settime() and adjtime()
when adjtime() is implemented later.

settimeofday() was adjusted to use the clock_settime() interface.

One side note discovered during testing: uptime(1) (part of the last(1)),
uses wtmp to determine boottime (not Minix's times(2)). This leads `uptime`
to report odd results when you set the time to a time prior to boottime.
This isn't a new bug introduced by my changes. It's been there for a while.
2013-04-04 15:04:54 +02:00
Thomas Cort
e67fc5771d libc: add clock_getres()/clock_gettime() system calls.
In order to make it more clear that ticks should be used for timers
and realtime should be used for timestamps / displaying the date/time,
getuptime() was renamed to getticks() and getuptime2() was renamed to
getuptime().

Servers, drivers, libraries, tests, etc that use getuptime()/getuptime2()
have been updated. In instances where a realtime was calculated, the
calculation was changed to use realtime.

System calls clock_getres() and clock_gettime() were added to PM/libc.
2013-04-04 15:04:53 +02:00