Before safecopies, the IO_ENDPT and DL_ENDPT message fields were needed
to know which actual process to copy data from/to, as that process may
not always be the caller. Now that we have full safecopy support, these
fields have become useless for that purpose: the owner of the grant is
*always* the caller. Allowing the caller to supply another endpoint is
in fact dangerous, because the callee may then end up using a grant
from a third party. One could call this a variant of the confused
deputy problem.
From now on, safecopy calls should always use the caller's endpoint as
grant owner. This fully obsoletes the DL_ENDPT field in the
inet/ethernet protocol. IO_ENDPT has other uses besides identifying the
grant owner though. This patch renames IO_ENDPT to USER_ENDPT, not only
because that is a more fitting name (it should never be used for I/O
after all), but also in order to intentionally break any old system
source code outside the base system. If this patch breaks your code,
fixing it is fairly simple:
- DL_ENDPT should be replaced with m_source;
- IO_ENDPT should be replaced with m_source when used for safecopies;
- IO_ENDPT should be replaced with USER_ENDPT for any other use, e.g.
when setting REP_ENDPT, matching requests in CANCEL calls, getting
DEV_SELECT flags, and retrieving of the real user process's endpoint
in DEV_OPEN.
The changes in this patch are binary backward compatible.
Dhcp only works if devices are configured with a broadcast source
address at the begining as it currently uses raw ip sockets and the
sockets sets the source address. It is a quick hack and proper hdcpd
fix is preferable
- on driver restarts, reopen devices on a per-file basis, not per-mount
- do not assume that there is just one vnode per block-special device
- update block-special files in the uncommon mounting success paths, too
- upon mount, sync but also invalidate affected buffers on the root FS
- upon unmount, check whether a vnode is in use before updating it
Take into account the ALL and ALL_SYS cases when constructing proper
symmetrical IPC send masks. Fix system.conf accordingly, to keep
userland processes from sending to several non-interface servers and
drivers. Also fix IS's F4 formatting.
From now on, the "ipc" directive in system.conf refers to process names
instead of labels, similar to the "control" directive. The old, more
fine-grained approach is deemed unnecessary and cumbersome at this time.
As side effects, this patch unbreaks late IPC permission computation as
well as the filter driver.
- regions were preivous stored in a linked list, as 'normally'
there are just 2 or 3 (text, data, stack), but that's slow
if lots of regions are made with mmap()
- measurable performance improvement with gcc and clang
- profile --nmi | --rtc sets the profiling mode
- --rtc is default, uses BIOS RTC, cannot profile kernel the presetted
frequency values apply
- --nmi is only available in APIC mode as it uses the NMI watchdog, -f
allows any frequency in Hz
- both modes use compatible data structures
- EBADCPU is returned is scheduler tries to run a process on a CPU
that either does not exist or isn't booted
- this change was originally meant to deal with stupid cpuid
instruction which provides totally useless information about
hyper-threading and MPS which does not deal with ht at all. ACPI
provides correct information. If ht is turned off it looks like some
CPUs failed to boot. Nevertheless this patch may be handy for
testing/benchmarking in the future.
- RTS_VMINHIBIT flag is used to stop process while VM is fiddling with
its pagetables
- more generic way of sending synchronous scheduling events among cpus
- do the x-cpu smp sched calls only if the target process is runnable.
If it is not, it cannot be running and it cannot become runnable
this CPU holds the BKL
- sys_schedule can change only selected values, -1 means that the
current value should be kept unchanged. For instance we mostly want
to change the scheduling quantum and priority but we want to keep
the process at the current cpu
- RS can hand off its processes to scheduler
- service can read the destination cpu from system.conf
- RS can pass the information farther
- machine information contains the number of cpus and the bsp id
- a dummy SMP scheduler which keeps all system processes on BSP and
all other process on APs. The scheduler remembers how many processes
are assigned to each CPU and always picks the one with the least
processes for a new process.
file descriptor passing, PFS does some back calls to VFS. For example, to
verify the validity of a path provided by a process and to tell VFS it must
copy file descriptors from one process to another.
- enabling writing in COW once phys block is reference only once is racy if VM
is preemptible. original memory location may get overwritten before COW copies
the memory
- problem when DEBUG_RACE is on and a big problem for SMP
- Remove unused includes.
- Add include guards to headers.
- Use unsigned variables in case they're never going to hold a negative
value. This causes GCC's complaints to disappear and should make flexelint
a lot happier, too.
- Make functions private when they're used only within a module.
- Remove unused variables.
- Add casts where appropriate.
- Currently the cpu time quantum is timer-ticks based. Thus the
remaining quantum is decreased only if the processes is interrupted
by a timer tick. As processes block a lot this typically does not
happen for normal user processes. Also the quantum depends on the
frequency of the timer.
- This change makes the quantum miliseconds based. Internally the
miliseconds are translated into cpu cycles. Everytime userspace
execution is interrupted by kernel the cycles just consumed by the
current process are deducted from the remaining quantum.
- It makes the quantum system timer frequency independent.
- The boot processes quantum is loosely derived from the tick-based
quantas and 60Hz timer and subject to future change
- the 64bit arithmetics is a little ugly, will be changes once we have
compiler support for 64bit integers (soon)
-Makefile updates
-Update mkdep
-Build fixes/warning cleanups for some programs
-Restore leading underscores on global syms in kernel asm files
-Increase ramdisk size
In this second phase, scheduling is moved from PM to its own
scheduler (see r6557 for phase one). In the next phase we hope to a)
include useful information in the "out of quantum" message and b)
create some simple scheduling policy that makes use of that
information.
When the system starts up, PM will iterate over its process table and
ask SCHED to take over scheduling unprivileged processes. This is
done by sending a SCHEDULING_START message to SCHED. This message
includes the processes endpoint, the parent's endpoint and its nice
level. The scheduler adds this process to its schedproc table, issues
a schedctl, and returns its own endpoint to PM - as the endpoint of
the effective scheduler. When a process terminates, a SCHEDULING_STOP
message is sent to the scheduler.
The reason for this effective endpoint is for future compatibility.
Some day, we may have a scheduler that, instead of scheduling the
process itself, forwards the SCHEDULING_START message on to another
scheduler.
PM has information on who schedules whom. As such, scheduling
messages from user-land are sent through PM. An example is when
processes change their priority, using nice(). In that case, a
getsetpriority message is sent to PM, which then sends a
SCHEDULING_SET_NICE to the process's effective scheduler.
When a process is forked through PM, it inherits its parent's
scheduler, but is spawned with an empty quantum. As before, a request
to fork a process flows through VM before returning to PM, which then
wakes up the child process. This flow has been modified slightly so
that PM notifies the scheduler of the new process, before waking up
the child process. If the scheduler fails to take over scheduling,
the child process is torn down and the fork fails with an erroneous
value.
Process priority is entirely decided upon using nice levels. PM
stores a copy of each process's nice level and when a child is
forked, its parent's nice level is sent in the SCHEDULING_START
message. How this level is mapped to a priority queue is up to the
scheduler. It should be noted that the nice level is used to
determine the max_priority and the parent could have been in a lower
priority when it was spawned. To prevent a CPU intensive process from
hawking the CPU by continuously forking children that get scheduled
in the max_priority, the scheduler should determine in which queue
the parent is currently scheduled, and schedule the child in that
same queue.
Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as
NR_SCHED_QUEUES/2. That results in a "off by one" error when
converting priority->nice->priority for nice=0. This also had the
side effect that if someone were to set the MAX_USER_Q to something
else than 0, then USER_Q would be off.
model to an instance-based model. Each ethernet driver instance is now
responsible for exactly one network interface card. The port field in
/etc/inet.conf now acts as an instance field instead.
This patch also updates the data link protocol. This update:
- eliminates the concept of ports entirely;
- eliminates DL_GETNAME entirely;
- standardizes on using m_source for IPC and DL_ENDPT for safecopies;
- removes error codes from TASK/STAT replies, as they were unused;
- removes a number of other old or unused fields;
- names and renames a few other fields.
All ethernet drivers have been changed to:
- conform to the new protocol, and exactly that;
- take on an instance number based on a given "instance" argument;
- skip that number of PCI devices in probe iterations;
- use config tables and environment variables based on that number;
- no longer be limited to a predefined maximum of cards in any way;
- get rid of any leftover non-safecopy support and other ancient junk;
- have a correct banner protocol figure, or none at all.
Other changes:
* Inet.conf is now taken to be line-based, and supports #-comments.
No existing installations are expected to be affected by this.
* A new, select-based asynchio library replaces the old one.
Kindly contributed by Kees J. Bot.
* Inet now supports use of select() on IP devices.
Combined, the last two changes together speed up dhcpd
considerably in the presence of multiple interfaces.
* A small bug has been fixed in nonamed.
- this panic may be unnecessarily triggered if PM gets the delayed
stop signal from kernel before it gets reply from VFS to the UNPAUSE
call.
- after this change PM does not proceed to delivering the signal until
the reply from VFS is received. Perhaps PM could deliver the signal
straight away as it knows that the process does not run. Possibly
i dangerous.
- the signal is deliverd immediately after the UNPAUSE reply as the
pending signals are always checked at the moment.
- rs does not assume hz==60
- rs adjusts its timeout ticks by the system clock frequency
- drivers have time to reply if hz is set too high (e.g. 1000+) for
instance when debugging
A new call to vm lets processes yield a part of their memory to vm,
together with an id, getting newly allocated memory in return. vm is
allowed to forget about it if it runs out of memory. processes can ask
for it back using the same id. (These two operations are normally
combined in a single call.)
It can be used as a as-big-as-memory-will-allow block cache for
filesystems, which is how mfs now uses it.
RS CHANGES:
- Crash recovery is now implemented like live update. Two instances are kept
side by side and the dead version is live updated into the new one. The endpoint
doesn't change and the failure is not exposed (by default) to other system
services.
- The new instance can be created reactively (when a crash is detected) or
proactively. In the latter case, RS can be instructed to keep a replica of
the system service to perform a hot swap when the service fails. The flag
SF_USE_REPL is set in that case.
- The new flag SF_USE_REPL is supported for services in the boot image and
dynamically started services through the RS interface (i.e. -p option in the
service utility).
- Fixed a free unallocated memory bug for core system services.
this patch changes the way pagefaults are delivered to VM. It adopts
the same model as the out-of-quantum messages sent by kernel to a
scheduler.
- everytime a userspace pagefault occurs, kernel creates a message
which is sent to VM on behalf of the faulting process
- the process is blocked on delivery to VM in the standard IPC code
instead of waiting in a spacial in-kernel queue (stack) and is not
runnable until VM tell kernel that the pagefault is resolved and is
free to clear the RTS_PAGEFAULT flag.
- VM does not need call kernel and poll the pagefault information
which saves many (1/2?) calls and kernel calls that return "no more
data"
- VM notification by kernel does not need to use signals
- each entry in proc table is by 12 bytes smaller (~3k save)
- while PM implements fork also for RS it needs to remember what to
schedule and what not. PM_SCHEDULED flag serves this purpose.
- PM only schedules processes that are descendaints of init, i.e. normal
user processes
- after a process is forked PM schedules for the first time only
processes that have PM_SCHEDULED set. The others are handled iether
by kernel or some other scheduler
map_copy_ph_block is replaced by map_clone_ph_block, which can
replace a single physical block by multiple physical blocks.
also,
. merge map_mem.c with region.c, as they manipulate the same
data structures
. NOTRUNNABLE removed as sanity check
. use direct functions for ALLOC_MEM and FREE_MEM again
. add some checks to shared memory mapping code
. fix for data structure integrity when using shared memory
. fix sanity checks
- This patch removes the time slice split between parent and child in
fork.
- The time slice of the parent remains unchanged and the child does
not have any.
- If the process has a scheduler, the scheduler must assign the
quantum and priority of the new process and let it run.
- If the child does not inherit a scheduler, it is scheduled by the
dummy default kernel policy. (servers, drivers, etc.)
- In theory, the scheduler can change the quantum even of the parent
process and implement any policy for splitting the quantum as
neither the parent nor the child are runnable. Sending the
out-of_quantum message on behalf of the processes may look like the
right solution, however, the scheduler would probably handle the
message before the whole fork protocol is finished. This way the
scheduler has absolute control when the process should become
runnable.
VFS CHANGES:
- dmap table no longer statically initialized in VFS
- Dropped FSSIGNON svrctl call no longer used by INET
INET CHANGES:
- INET announces its presence to VFS just like any other driver
RS CHANGES:
- The boot image dev table contains all the data to initialize VFS' dmap table
- RS interface supports asynchronous up and update operations now
- RS interface extended to support driver style and flags
SYSLIB CHANGES:
- DS calls to publish / retrieve labels consider endpoints instead of u32_t.
VFS CHANGES:
- mapdriver() only adds an entry in the dmap table in VFS.
- dev_up() is only executed upon reception of a driver up event.
INET CHANGES:
- INET no longer searches for existing drivers instances at startup.
- A newtwork driver is (re)initialized upon reception of a driver up event.
- Networking startup is now race-free by design. No need to waste 5 seconds
at startup any more.
DRIVER CHANGES:
- Every driver publishes driver up events when starting for the first time or
in case of restart when recovery actions must be taken in the upper layers.
- Driver up events are published by drivers through DS.
- For regular drivers, VFS is normally the only subscriber, but not necessarily.
For instance, when the filter driver is in use, it must subscribe to driver
up events to initiate recovery.
- For network drivers, inet is the only subscriber for now.
- Every VFS driver is statically linked with libdriver, every network driver
is statically linked with libnetdriver.
DRIVER LIBRARIES CHANGES:
- Libdriver is extended to provide generic receive() and ds_publish() interfaces
for VFS drivers.
- driver_receive() is a wrapper for sef_receive() also used in driver_task()
to discard spurious messages that were meant to be delivered to a previous
version of the driver.
- driver_receive_mq() is the same as driver_receive() but integrates support
for queued messages.
- driver_announce() publishes a driver up event for VFS drivers and marks
the driver as initialized and expecting a DEV_OPEN message.
- Libnetdriver is introduced to provide similar receive() and ds_publish()
interfaces for network drivers (netdriver_announce() and netdriver_receive()).
- Network drivers all support live update with no state transfer now.
KERNEL CHANGES:
- Added kernel call statectl for state management. Used by driver_announce() to
unblock eventual callers sendrecing to the driver.
- IPC_FLG_MSG_FROM_KERNEL status flag is returned to userspace if the
receive was satisfied by s message which was sent by the kernel on
behalf of a process. This perfectly reliale information.
- MF_SENDING_FROM_KERNEL flag added to processes to be able to set
IPC_FLG_MSG_FROM_KERNEL when finishing receive if the receiver
wasn't ready to receive immediately.
- PM is changed to use this information to confirm that the scheduling
messages are indeed from the kernel and not faked by a process.
PM uses sef_receive_status()
- get_work() is removed from PM to make the changes simpler
- cotributed by Bjorn Swift
- In this first phase, scheduling is moved from the kernel to the PM
server. The next steps are to a) moving scheduling to its own server
and b) include useful information in the "out of quantum" message,
so that the scheduler can make use of this information.
- The kernel process table now keeps record of who is responsible for
scheduling each process (p_scheduler). When this pointer is NULL,
the process will be scheduled by the kernel. If such a process runs
out of quantum, the kernel will simply renew its quantum an requeue
it.
- When PM loads, it will take over scheduling of all running
processes, except system processes, using sys_schedctl().
Essentially, this only results in taking over init. As children
inherit a scheduler from their parent, user space programs forked by
init will inherit PM (for now) as their scheduler.
- Once a process has been assigned a scheduler, and runs out of
quantum, its RTS_NO_QUANTUM flag will be set and the process
dequeued. The kernel will send a message to the scheduler, on the
process' behalf, informing the scheduler that it has run out of
quantum. The scheduler can take what ever action it pleases, based
on its policy, and then reschedule the process using the
sys_schedule() system call.
- Balance queues does not work as before. While the old in-kernel
function used to renew the quantum of processes in the highest
priority run queue, the user-space implementation only acts on
processes that have been bumped down to a lower priority queue.
This approach reacts slower to changes than the old one, but saves
us sending a sys_schedule message for each process every time we
balance the queues. Currently, when processes are moved up a
priority queue, their quantum is also renewed, but this can be
fiddled with.
- do_nice has been removed from kernel. PM answers to get- and
setpriority calls, updates it's own nice variable as well as the
max_run_queue. This will be refactored once scheduling is moved to a
separate server. We will probably have PM update it's local nice
value and then send a message to whoever is scheduling the process.
- changes to fix an issue in do_fork() where processes could run out
of quantum but bypassing the code path that handles it correctly.
The future plan is to remove the policy from do_fork() and implement
it in userspace too.
IPC changes:
- receive() is changed to take an additional parameter, which is a pointer to
a status code.
- The status code is filled in by the kernel to provide additional information
to the caller. For now, the kernel only fills in the IPC call used by the
sender.
Syslib changes:
- sef_receive() has been split into sef_receive() (with the original semantics)
and sef_receive_status() which exposes the status code to userland.
- Ideally, every sys process should gradually switch to sef_receive_status()
and use is_ipc_notify() as a dependable way to check for notify.
- SEF has been modified to use is_ipc_notify() and demonstrate how to use the
new status code.
- before enabling paging VM asks kernel to resize its segments. This
may cause kernel to segfault if APIC is used and an interrupt
happens between this and paging enabled. As these are 2 separate
vmctl calls it is not atomic. This patch fixes this problem. VM does
not ask kernel to resize the segments in a separate call anymore.
The new segments limit is part of the "enable paging" call. It
generalizes this call in such a way that more information can be
passed as need be or the information may be completely different if
another architecture requires this.
UPDATING INFO:
20100317:
/usr/src/etc/system.conf updated to ignore default kernel calls: copy
it (or merge it) to /etc/system.conf.
The hello driver (/dev/hello) added to the distribution:
# cd /usr/src/commands/scripts && make clean install
# cd /dev && MAKEDEV hello
KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.
PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.
SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.
VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().
RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.
DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.
DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
swapcontext, and makecontext).
- Fix VM to not erroneously think the stack segment and data segment have
collided when a user-space thread invokes brk().
- Add test51 to test ucontext functionality.
- Add man pages for ucontext system calls.
Move archtypes.h to include/ dir, since several servers require it. Move
fpu.h and stackframe.h to arch-specific header directory. Make source
files and makefiles aware of the new header locations.
-Convert the include directory over to using bsdmake
syntax
-Update/add mkfiles
-Modify install(1) so that it can create symlinks
-Update makefiles to use new install(1) options
-Rename /usr/include/ibm to /usr/include/i386
-Create /usr/include/machine symlink to arch header files
-Move vm_i386.h to its new home in the /usr/include/i386
-Update source files to #include the header files at their
new homes.
-Add new gnu-includes target for building GCC headers
this change
- makes panic() variadic, doing full printf() formatting -
no more NO_NUM, and no more separate printf() statements
needed to print extra info (or something in hex) before panicing
- unifies panic() - same panic() name and usage for everyone -
vm, kernel and rest have different names/syntax currently
in order to implement their own luxuries, but no longer
- throws out the 1st argument, to make source less noisy.
the panic() in syslib retrieves the server name from the kernel
so it should be clear enough who is panicing; e.g.
panic("sigaction failed: %d", errno);
looks like:
at_wini(73130): panic: sigaction failed: 0
syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a
- throws out report() - printf() is more convenient and powerful
- harmonizes/fixes the use of panic() - there were a few places
that used printf-style formatting (didn't work) and newlines
(messes up the formatting) in panic()
- throws out a few per-server panic() functions
- cleans up a tie-in of tty with panic()
merging printf() and panic() statements to be done incrementally.
- VFS: check for negative sizes in all truncate calls
- VFS: update file size after truncating with fcntl(F_FREESP)
- VFS: move pos/len checks for F_FREESP with l_len!=0 from FS to VFS
- MFS: do not zero data block for small files when fully truncating
- MFS: do not write out freed indirect blocks after freeing space
- MFS: make truncate work correctly with differing zone/block sizes
- tests: add new test50 for truncate call family
- PM: get rid of umap warning
- sprofalyze.pl: update with recently added servers and drivers
- sprofalyze.pl: properly truncate process names for sample matching
Some cases were fixed by declaring the function void, others were fixed
by adding a return <value> statement, thereby avoiding potentially
incorrect behavior (usually in error handling).
Some enum correctness in boot.c.
- taskcall.c is 3x in the trunk as part of libc, libsysutil and
libsys. It should be only part of libsys.
- only system process should be linked with libsys, therefore using
raw _taskcall() in service.c is replaced by _syscall()
- the same for minix_rs.c
- lib/other/sys_eniop.c can go without replacement as it is part of
syslib
- Make open(2) more POSIX compliant
- Add a test case for dangling symlinks and open() syscall with O_CREAT and
O_EXCL on a symlink.
- Update open(2) man page to reflect change.
Main changes:
- COW optimization for safecopy.
- safemap, a grant-based interface for sharing memory regions between processes.
- Integration with safemap and complete rework of DS, supporting new data types
natively (labels, memory ranges, memory mapped ranges).
- For further information:
http://wiki.minix3.org/en/SummerOfCode2009/MemoryGrants
Additional changes not included in the original Wu's branch:
- Fixed unhandled case in VM when using COW optimization for safecopy in case
of a block that has already been shared as SMAP.
- Better interface and naming scheme for sys_saferevmap and ds_retrieve_map
calls.
- Better input checking in syslib: check for page alignment when creating
memory mapping grants.
- DS notifies subscribers when an entry is deleted.
- Documented the behavior of indirect grants in case of memory mapping.
- Test suite in /usr/src/test/safeperf|safecopy|safemap|ds/* reworked
and extended.
- Minor fixes and general cleanup.
- TO-DO: Grant ids should be generated and managed the way endpoints are to make
sure grant slots are never misreused.
- allow mounting with "none" block device
- allow unmounting by mountpoint
- make VFS aware of file system process labels
- allow m3_ca1 to use the full available message size
- use *printf in u/mount(1), as mount(2) uses it already
- fix reference leaks for some mount error cases in VFS
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
- clean up kernel section of minix/com.h somewhat
- remove ALLOCMEM and VM_ALLOCMEM calls
- remove non-safecopy and minix-vmd support from Inet
- remove SYS_VIRVCOPY and SYS_PHYSVCOPY calls
- remove obsolete segment encoding in SYS_SAFECOPY*
- remove DEVCTL call, svrctl(FSDEVUNMAP), map_driverX
- remove declarations of unimplemented svrctl requests
- remove everything related to swapping to disk
- remove floppysetup.sh
- remove traces of rescue device
- update DESCRIBE.sh with new devices
- some other small changes
RS CHANGES:
- RS retains information on both labels and process names now. Labels for boot
processes are configured in the boot image priv table. Process names are
inherited from the in-kernel boot image table.
- When RS_REUSE is specified in do_up, RS looks for an existing slot having the
same process name as the one we are about to start. If one is found with
an in-memory copy of its executable image, the image is then shared between
the two processes, rather than copying it again. This behavior can be specified
by using 'service -r' when starting a system service from the command line.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
- MFS, df(1), fsck(1), badblocks(8), de(1x) now compute the
superblock's s_firstdatazone value if the on-disk value is zero
- mkfs(1) sets s_firstdatazone in the superblock to zero if the
on-disk field is too small to store the actual value
- more agressive mkfs(1) inode number heuristic, copied from r5261
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
/etc CHANGES:
- /etc/drivers.conf has been renamed to /etc/system.conf. Every entry in
the file is now marked as "service" rather than driver.
- user "service" has been added to password file /etc/passwd.
- docs/UPDATING updated accordingly, as well as every other mention to the old
drivers.conf in the system.
RS CHANGES:
- No more distinction between servers and drivers.
- RS_START has been renamed to RS_UP and the old legacy RS_UP and RS_UP_COPY
dropped.
- RS asks PCI to set / remove ACL entries only for services whose ACL properties
have been set. This change eliminates unnecessary warnings.
- Temporarily minimize the risk of potential races at boot time or when starting
a new service. Upcoming changes will eliminate races completely.
- General cleanup.
KERNEL CHANGES:
- The kernel only knows about privileges of kernel tasks and the root system
process (now RS).
- Kernel tasks and the root system process are the only processes that are made
schedulable by the kernel at startup. All the other processes in the boot image
don't get their privileges set at startup and are inhibited from running by the
RTS_NO_PRIV flag.
- Removed the assumption on the ordering of processes in the boot image table.
System processes can now appear in any order in the boot image table.
- Privilege ids can now be assigned both statically or dynamically. The kernel
assigns static privilege ids to kernel tasks and the root system process. Each
id is directly derived from the process number.
- User processes now all share the static privilege id of the root user
process (now INIT).
- sys_privctl split: we have more calls now to let RS set privileges for system
processes. SYS_PRIV_ALLOW / SYS_PRIV_DISALLOW are only used to flip the
RTS_NO_PRIV flag and allow / disallow a process from running. SYS_PRIV_SET_SYS /
SYS_PRIV_SET_USER are used to set privileges for a system / user process.
- boot image table flags split: PROC_FULLVM is the only flag that has been
moved out of the privilege flags and is still maintained in the boot image
table. All the other privilege flags are out of the kernel now.
RS CHANGES:
- RS is the only user-space process who gets to run right after in-kernel
startup.
- RS uses the boot image table from the kernel and three additional boot image
info table (priv table, sys table, dev table) to complete the initialization
of the system.
- RS checks that the entries in the priv table match the entries in the boot
image table to make sure that every process in the boot image gets schedulable.
- RS only uses static privilege ids to set privileges for system services in
the boot image.
- RS includes basic memory management support to allocate the boot image buffer
dynamically during initialization. The buffer shall contain the executable
image of all the system services we would like to restart after a crash.
- First step towards decoupling between resource provisioning and resource
requirements in RS: RS must know what resources it needs to restart a process
and what resources it has currently available. This is useful to tradeoff
reliability and resource consumption. When required resources are missing, the
process cannot be restarted. In that case, in the future, a system flag will
tell RS what to do. For example, if CORE_PROC is set, RS should trigger a
system-wide panic because the system can no longer function correctly without
a core system process.
PM CHANGES:
- The process tree built at initialization time is changed to have INIT as root
with pid 0, RS child of INIT and all the system services children of RS. This
is required to make RS in control of all the system services.
- PM no longer registers labels for system services in the boot image. This is
now part of RS's initialization process.
- add new "control" config directive, to let drivers restart drivers
(by Jorrit Herder)
- fix bug causing system processes to be started twice sometimes
- fix resource leak (PCI ACLs) when child fails right after exec
- fix resource leak (memory) when child exec fails at all
- fix race condition setting VM call privileges for new child
- make dev_execve() return a proper result, and check this result
- remove RS_EXECFAILED, as it should behave exactly like RS_EXITING
- add more clarifying comments about starting servers
- fixes a problem in inodes truct definitions. The original definitions use
posix types. These types don't have well defined size. Therefore when
compiling mkfs on a different system natively the inodes sizes do not match.
This patch replaces the posix types with interger types of the same size and
signedness as the original types in use.
told to kernel
- makes VM ask the kernel if a certain process is allowed
to map in a range of physical memory (VM rounds it to page
boundaries afterwards - but it's impossible to map anything
smaller otherwise so I assume this is safe, i.e. there won't
be anything else in that page; certainly no regular memory)
- VM permission check cleanup (no more hardcoded calls, less
hardcoded logic, more readable main loop), a loose end left
by GQ
- remove do_copy warning, as the ipc server triggers this but
it's no more harmful than the special cases already excluded
explicitly (VFS, PM, etc).
IS:
- do not use p_getfrom_e for a process that is sending
- register with TTY only function keys that are used
- various header and formatting fixes
- proper shutdown code
TTY:
- restore proper Ctrl+F1 dump contents
isofs:
- don't even try to call sys_exit()
- MFS and mkfs(1) now perform extra sanity checks
- fsck(1) can now deal with inode tables extending beyond the file
system's first 4GB
- badblocks(8) no longer writes out the superblock for no reason
- mkfs(1) no longer crashes when given no parameters
- more(1) no longer crashes when standard output is redirected
- allow PM to tell sys_runctl() whether to use delay call feature
- only use this feature in PM for delivering signals - not for exits
- do better error checking in PM on sys_runctl() calls
- rename SIGKREADY to SIGNDELAY
o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL
o PM signal handling logic should now work properly, even with debuggers
being present
o Asynchronous PM/VFS protocol, full IPC support for senda(), and
AMF_NOREPLY senda() flag
DETAILS
Process stop and delay call handling of PM:
o Added sys_runctl() kernel call with sys_stop() and sys_resume()
aliases, for PM to stop and resume a process
o Added exception for sending/syscall-traced processes to sys_runctl(),
and matching SIGKREADY pseudo-signal to PM
o Fixed PM signal logic to deal with requests from a process after
stopping it (so-called "delay calls"), using the SIGKREADY facility
o Fixed various PM panics due to race conditions with delay calls versus
VFS calls
o Removed special PRIO_STOP priority value
o Added SYS_LOCK RTS kernel flag, to stop an individual process from
running while modifying its process structure
Signal and debugger handling in PM:
o Fixed debugger signals being dropped if a second signal arrives when
the debugger has not retrieved the first one
o Fixed debugger signals being sent to the debugger more than once
o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR
protocol message
o Detached debugger signals from general signal logic and from being
blocked on VFS calls, meaning that even VFS can now be traced
o Fixed debugger being unable to receive more than one pending signal in
one process stop
o Fixed signal delivery being delayed needlessly when multiple signals
are pending
o Fixed wait test for tracer, which was returning for children that were
not waited for
o Removed second parallel pending call from PM to VFS for any process
o Fixed process becoming runnable between exec() and debugger trap
o Added support for notifying the debugger before the parent when a
debugged child exits
o Fixed debugger death causing child to remain stopped forever
o Fixed consistently incorrect use of _NSIG
Extensions to ptrace():
o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a
debugger to and from a process
o Added T_SYSCALL ptrace request, to trace system calls
o Added T_SETOPT ptrace request, to set trace options
o Added TO_TRACEFORK trace option, to attach automatically to children
of a traced process
o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon
a successful exec() of the tracee
o Extended T_GETUSER ptrace support to allow retrieving a process's priv
structure
o Removed T_STOP ptrace request again, as it does not help implementing
debuggers properly
o Added MINIX3-specific ptrace test (test42)
o Added proper manual page for ptrace(2)
Asynchronous PM/VFS interface:
o Fixed asynchronous messages not being checked when receive() is called
with an endpoint other than ANY
o Added AMF_NOREPLY senda() flag, preventing such messages from
satisfying the receive part of a sendrec()
o Added asynsend3() that takes optional flags; asynsend() is now a
#define passing in 0 as third parameter
o Made PM/VFS protocol asynchronous; reintroduced tell_fs()
o Made PM_BASE request/reply number range unique
o Hacked in a horrible temporary workaround into RS to deal with newly
revealed RS-PM-VFS race condition triangle until VFS is asynchronous
System signal handling:
o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal
o Removed is-superuser check from PM's do_procstat() (aka getsigset())
o Added sigset macros to allow system processes to deal with the full
signal set, rather than just the POSIX subset
Miscellaneous PM fixes:
o Split do_getset into do_get and do_set, merging common code and making
structure clearer
o Fixed setpriority() being able to put to sleep processes using an
invalid parameter, or revive zombie processes
o Made find_proc() global; removed obsolete proc_from_pid()
o Cleanup here and there
Also included:
o Fixed false-positive boot order kernel warning
o Removed last traces of old NOTIFY_FROM code
THINGS OF POSSIBLE INTEREST
o It should now be possible to run PM at any priority, even lower than
user processes
o No assumptions are made about communication speed between PM and VFS,
although communication must be FIFO
o A debugger will now receive incoming debuggee signals at kill time
only; the process may not yet be fully stopped
o A first step has been made towards making the SYSTEM task preemptible
- all macros in consts.h that depend on NR_TASKS replaced by a FP_BLOCKED_ON_*
- fp_suspended removed and replaced by fp_blocked_on. Testing whether a process
is supended is qeual to testing whether fp_blocked_on is FP_BLOCKED_ON_NONE or
not
- fp_task is valid only if fp_blocked_on == FP_BLOCKED_ON_OTHER
- no need of special values that do not colide with valid and special endpoints
since they are not used as endpoints anymore
- suspend only takes FP_BLOCKED_ON_* values not endpoints anymore
- suspend(task) replaced by wait_for(task) which sets fp_task so we remember who
are we waiting for and suspend sets fp_blocked_on to FP_BLOCKED_ON_OTHER to
signal that we are waiting for some other process
- some functions should take endpoint_t instead of int, fixed
shared with the kernel, mapped into kernel address space;
kernel is notified of its location. kernel segment size is
increased to make it fit.
- map in kernel and other processes that don't have their
own page table using single 4MB (global) mapping.
- new sanity check facility: objects that are allocated with
the slab allocator are, when running with sanity checking on,
marked readonly until they are explicitly unlocked using the USE()
macro.
- another sanity check facility: collect all uses of memory and
see if they don't overlap with (a) eachother and (b) free memory
- own munmap() and munmap_text() functions.
- exec() recovers from out-of-memory conditions properly now; this
solves some weird exec() behaviour
- chew off memory from the same side of the chunk as where we
start scanning, solving some memory fragmentation issues
- use avl trees for freelist and phys_ranges in regions
- implement most useful part of munmap()
- remap() stuff is GQ's for shared memory
addr and taddr don't have to be defined any more, so that <sys/mman.h>
can be included for proper prototypes of munmap() and friends.
- rename our GETPID to MINIX_GETPID to avoid a name conflict with
other sources
- PM needs its own munmap() and munmap_text() to avoid sending messages
to VM at the startup phase. It *does* want to do that, but only
after initialising. So they're called again with unmap_ok set to 1
later.
- getnuid(), getngid() implementation
- If allocation of a new buffer fails, use an already-allocated
unused buffer if available (low memory conditions)
- Allocate buffers dynamically, so memory isn't wasted on wrong-sized
buffers.
- No more _MAX_BLOCK_SIZE.
bin_img=1 in the boot monitor will make sure that during the boot procedure the
mfs binary that is part of the boot image is the only binary that is used to
mount partitions. This is useful when for some reason the mfs binary on disk
malfunctions, rendering Minix unable to boot. By setting bin_img=1, the binary
on disk is ignored and the binary in the boot image is used instead.
- 'service' now accepts an additional flag -r. -r implies -c. -r instructs RS
to first look in memory if the binary has already been copied to memory and
execute that version, instead of loading the binary from disk. For example,
the first time a MFS is being started it is copied (-c) to memory and
executed from there. The second time MFS is being started this way, RS will
look in memory for a previously copied MFS binary and reuse it if it exists.
- The mount and newroot commands now accept an additional flag -i, which
instructs them to set the MS_REUSE flag in the mount flags.
- The mount system call now supports the MS_REUSE flag and invokes 'service'
with the -r flag when MS_REUSE is set.
- /etc/rc and the rc script that's included in the boot image check for the
existence of the bin_img flag in the boot monitor, and invoke mount and
newroot with the -i flag accordingly.
- When one does a select on a file descriptor that is meaningless for that particular file type, select shall indicate that the file descriptor is ready for that particular operation and that the file descriptor has no exceptional condition pending.
o Don't call vm_willexit() more than once upon normal process exit
o Correct two cases of indenting of the no-discussion-possible kind
o Perform slightly stricter ptrace(2) checks:
- process calling ptrace must be target process's parent
- process must call wait/waitpid before using ptrace on stopped child
- no ptrace on zombies
o Allow user processes to use ptrace(T_STOP) to stop an active child
Kernel:
o Remove s_ipc_sendrec, instead using s_ipc_to for all send primitives
o Centralize s_ipc_to bit manipulation,
- disallowing assignment of bits pointing to unused priv structs;
- preventing send-to-self by not setting bit for own priv struct;
- preserving send mask matrix symmetry in all cases
o Add IPC send mask checks to SENDA, which were missing entirely somehow
o Slightly improve IPC stats accounting for SENDA
o Remove SYSTEM from user processes' send mask
o Half-fix the dependency between boot image order and process numbers,
- correcting the table order of the boot processes;
- documenting the order requirement needed for proper send masks;
- warning at boot time if the order is violated
RS:
o Add support in /etc/drivers.conf for servers that talk to user processes,
- disallowing IPC to user processes if no "ipc" field is present
- adding a special "USER" label to explicitly allow IPC to user processes
o Always apply IPC masks when specified; remove -i flag from service(8)
o Use kernel send mask symmetry to delay adding IPC permissions for labels
that do not exist yet, adding them to that label's process upon creation
o Add VM to ipc permissions list for rtl8139 and fxp in drivers.conf
Left to future fixes:
o Removal of the table order vs process numbers dependency altogether,
possibly using per-process send list structures as used for SYSTEM calls
o Proper assignment of send masks to boot processes;
some of the assigned (~0) masks are much wider than necessary
o Proper assignment of IPC send masks for many more servers in drivers.conf
o Removal of the debugging warning about the now legitimate case where RS's
add_forward_ipc cannot find the IPC destination's label yet
POSIX compliance.
VFS changes:
* truncate() on a file system mounted read-only no longer panics MFS.
* ftruncate() and fcntl(F_FREESP) now check for write permission on
the file descriptor instead of the file, write().
* utime(), chown() and fchown() now check for file system read-only
status.
MFS changes:
* link() and rename() no longer return the internal EENTERMOUNT and
ELEAVEMOUNT errors to the application as part of a check on the
source path.
* rename() now treats EENTERMOUNT from the destination path check as
an error, preventing file system corruption from renaming a normal
directory to an existing mountpoint directory.
* mountpoints (mounted-on dirs) are hidden better during lookups:
- if a lookup starts from a mountpoint, the first component has to
be ".." (anything else being a VFS-FS protocol violation).
- in that case, the permissions of the mountpoint are not checked.
- in all other cases, visiting a mountpoint always results in
EENTERMOUNT.
* a lookup on ".." from a mount root or chroot(2) root no longer
succeeds if the caller does not have search permission on that
directory.
* POSIX: getdents() now updates directory access times.
* POSIX: readlink() now returns partial results instead of ERANGE.
Miscellaneous changes:
* semaphore file handling bug (leading to hangs) fixed in test 32.
The VFS changes should now put the burden of checking for read-only
status of file systems entirely on VFS, and limit the access
permission checks that file systems have to perform, to checking
search permission on directories during lookups. From this point on,
any deviation from that spceification should be considered a bug.
Note that for legacy reasons, the root partition is assumed to be
mounted read-write.
- Changed VFS-FS protocol to only store OK or negative error code in
m_type field of reply messages.
- Changed VFS to treat nonzero positive replies from FS as requests.
- Added backwards compatibility to VFS and MFS.
No protection of global data structures is provided in VFS, so many
VFS calls cannot be made safely by FS servers during many FS calls.
Use with caution (or, preferably, not at all).
if the process was REVIVING. (susp_count doesn't count those
processes.) this together with dev_io SELECT suspend side effect
for asynch. character devices solves the hanging pipe bug. or
at last vastly improves it.
added sanity checks, turned off by default.
made the {NOT_,}{SUSPENDING,REVIVING} constants weirder to
help sanity checking.
- slight code cleanup
- neater exit procedure: exit when unmount
message received and kill signal (from RS 'down' or
reboot/shutdown) received (speed up unmount, but don't
confuse VFS by exiting before/during unmount msg)
read/write writable in the pagetable right away instead of waiting for
a pagefault. minor optimization.
some a sanity check of SLAB-allocated pointers.
vm gets its own _exit and __exit like PM, so the stock (library) panic works.
- ipc checking code in kernel didn't properly catch the
sendrec() to self case; added special case check
- triggered by PM using stock panic() - needs its own _exit()
reported by Joren l'Ami.
now used for printing diagnostic messages through the kernel message
buffer. this lets processes print diagnostics without sending messages
to tty and log directly, simplifying the message protocol a lot and
reducing difficulties with deadlocks and other situations in which
diagnostics are blackholed (e.g. grants don't work). this makes
DIAGNOSTICS(_S), ASYN_DIAGNOSTICS and DIAG_REPL obsolete, although tty
and log still accept the codes for 'old' binaries. This also simplifies
diagnostics in several servers and drivers - only tty needs its own
kputc() now.
. simplifications in vfs, and some effort to get the vnode references
right (consistent) even during shutdown. m_mounted_on is now NULL
for root filesystems (!) (the original and new root), a less awkward
special case than 'm_mounted_on == m_root_node'. root now has exactly
one reference, to root, if no files are open, just like all other
filesystems. m_driver_e is unused.
. map kernel in non-user
. don't map in first pages of kernel code and data
if possible
these first pages could actually be freed but as the
kernel isn't allowed to touch them either we can't reuse
them until VM has totally taken over page table management
and kernel doesn't rely on identity mapping any more.
their own fully fledged virtual address space and freeing
their pre-allocated heap+stack area (necessary to let memory
driver map in arbitrary areas of memory for /dev/mem without
sys_vm_map)
- small optimization preallocating memory on exec
- finished VR_DIRECT physical mapping code
flag to suspend a process until the filedescriptor is re-opened. Added
dev_reopen, asyn_io, suspended_ep, reopen_reply, asynsend, diag_repl,
close_filp, close_reply, unpause, select_reply1, select_reply2.
. print newline
. when recursive panic detected, don't simply return, confusing
the caller, but print a diagnostic and exit
. don't call sys_exit as this may confuse PM; it should be OK
to call PM exit() nowadays.
case of directories extended by subfilesystem. Rely on subfilesystem to
do read size truncating and return actual i/o size. This fixes bug 81 in
gforge, and unbreaks test 23.
Select now returns such a filedescriptor as ready (instead of EBADF).
Reply before dev_up in FSSIGNON to avoid the problem that a DEV_OPEN
request is received by a driver that expects a reply from the FSSIGNON.
