The T_DUMPCORE implementation was not only broken - it would currently
produce a coredump of the tracer process rather than the traced
process - but also deeply flawed, and fixing it would require serious
alteration of PM's internal state machine. It should be possible to
implement the same functionality in userland, and that is now the
suggested way forward. For now, also remove the (identical) utilities
using T_DUMPCORE: dumpcore(1) and gcore(1).
Change-Id: I1d51be19c739362b8a5833de949b76382a1edbcc
These days, DEV_OPEN calls to character drivers block the calling
thread until completion or failure, and thus never return SUSPEND to
the caller. The same already applied to BDEV_OPEN calls to block
drivers. It has thus become impossible for a process to enter a state
of being blocked on a device open call.
There is currently no support for restarting device open calls to
restarted character drivers. This support was present in the _DOPEN
logic, but was already no longer triggering. In the future, this case
should be handled by the thread performing the open request.
Change-Id: I6cc1e7b4c9ed116c6ce160b315e6e060124dce00
- change all sync char drivers into async drivers;
- retire support for the sync protocol in libchardev;
- remove async dev style, as this is now the default;
- remove dev_status from VFS;
- clean up now-unused protocol messages.
Change-Id: I6aacff712292f6b29f2ccd51bc1e7d7003723e87
- pass in file system type through mount(2), and return this type in
statvfs structures as generated by [f]statvfs(2);
- align mount flags field with NetBSD's, splitting out service flags
which are not to be passed to VFS;
- remove limitation of mount ABI to 16-byte labels, so that labels
can be made larger in the future;
- introduce new m11 message union type for mount(2) as side effect.
Change-Id: I88b7710e297e00a5e4582ada5243d3d5c2801fd9
eepromread could only read EEPROMs through the /dev/i2c interface.
Once the cat24c256 driver is started and claims/reserves the
device, it can no longer be read through the /dev/i2c interface.
This patch adds support for reading from EEPROMs through the
/dev/eeprom interface. For example, to read the on-board eeprom
on the BBB, one would do `eepromread -f /dev/eepromb1s50 -i`.
Change-Id: If08ce37231e593982eeb109bdd6d5458ad271108
. build writeisofs as a native tool too for it
. also mkfs.mfs: make missing file in proto nonlethal
. make setup script a little more self-sufficient
. hdboot: use INSTALL_FILE instead of INSTALL so that the
results get added to the METALOG
Change-Id: Id233e4c861f81046bf6c4be0510b8a3bf39ff9be
Replaces commands/hexdump as well as commands/od.
No Minix-specific changes were needed.
test/testsh2.sh was modified to match the spacing
used in the output of the NetBSD od command.
Change-Id: I65ee1d30e8cdd546097462df7c38c2d38f3e891d
Replaces commands/write. No Minix-specific changes needed.
The NetBSD version lacks a few features that were present
in the Minix version: cbreak mode, verbose, and shell escapes,
but the main write(1) functionality is there and working.
Change-Id: I87b9589c54d3595d26247d221bb3d1f613feeb8c
This reverts commit 4c87adc85c.
Change-Id: I469fbbe6f49802cb86d81b059cb454d967f47079
Reason: Introduces new device nodes and removes old devices nodes which where unintended at this point.
. make filesystems on primary partitions to make it
easier on the minix partition util
. so sfdisk isn't required as an external tool
. also make partition and hitherto x86-only utilities
arch-independent
Change-Id: Ib4e07e45d038d084dde1858917d3deb7f0616532
A script that creates a HD image ready to be booted by an x86
emulator, ready to work in a crossbuild environment.
It's really just for qemu/kvm as there's no boot code in
the MBR and no bootloader installed so we rely on the in-kvm
multiboot implementation for now. This is very convenient for
passing args too.
To minimize reliance on external tools, we use the Minix
'partition' utility to write the partition table of the HD
image, which therefore has to be compiled natively.
. new script releasetools/x86_hdimage.sh
. natively compile minix 'partition' utility
. make <machine/partition.h> 64-bit safe for it
Change-Id: If645b4691536752271e0b8a8ed59a34f248dace4
On the AM335X, writes to the padconf registers must be done in privileged
mode. To allow userspace drivers to dynamically change the padconf at
runtime, a kernel call has been added.
Change-Id: I4b25d2879399b1785a360912faa0e90b5c258533
Capes (i.e. expansion boards for the BeagleBone and BeagleBone Black)
each have their own cat24c256 EEPROM with information about the cape
such as the name of the cape, pins used, power requirements, etc.
This patch adds support for displaying the cape data fields. It
can be used in shell scripts to detect and identify attached capes.
Change-Id: I4bfa7aae634a7bacfa5e25afcba773d9fbc2316c
. added enable interrupts routine at the HW init stage
. remove workaround, obsoleted by libnetdriver change
. change netconf.sh to allow configuring this driver,
changed README.txt to reflect this
Change-Id: Ib659d5a55be96022b5e9013caa556dca5092ce89
An fprintf() has two %s formats but only one additional argument.
Include the name of the device file in the fprintf() call to
balance the arguments and format.
Change-Id: I62e702cf0bc9935897c2f85b0acc3b62b41d654a
- Re-write function declarations from K&R style to ANSI style.
- Change declaration of write_char(), S(), in_list() to match ptotos.
- Resolve clang warnings about assignments in conditionals.
Change-Id: I61624b18afbefe1ff29941233d274bd6c0f12520
Between Minix 3.1.2 and Minix 3.1.3, the d_name member of struct
dirent was reduced from 61 characters to 1 character. backup(8)
blindly copies the result of readdir() into an array of dirent
structs. As a consequence, the structs in the array only contain
the first letter of the name and the name string was not null
terminated. This caused the backup utility to always fail.
Remedy the situation by adding room for the full d_name.
Change-Id: I2a7b4630f1bb727825a95a6095a7a543fc2f08f6
- Simplify the message passing between readclock and the driver.
- Add a -q command line option to suppress warning messages. This
cuts down on the noise when readclock is called early in the boot
sequence and a secondary RTC driver (ex TPS95650) isn't up yet.
- Update the man page to be less i386 centric and add details about
the new -q option.
Change-Id: If8d7c50a217ca98c1e9fae0ca92521e2e7c893e4
Add support for getting/setting the am335x SoC's internal real
time clock. Also, allow the power off alarm to be set.
Make readclock an "always on" driver. This is needed for setting
power-off alarms whenever the power button is pressed on the BBB.
Replace the readclock.sh script & single run driver with a
readclock program that takes the same arguments and forwards
the requests on to the always up readclock driver.
Change-Id: Ifd6c2acd80ae4b5e79d83df510df445c24e24a71
128 byte reads are much more common than 32 byte reads. The message
passing + setup/teardown for a read is much more expensive, in terms
of time, than the reading itself. A slightly bigger struct is well
worth the time savings. This reduces read times for /dev/eeprom
from 57 seconds per 4KB to 14 seconds.
Additionally, make sending the page address in the eeprom driver
and utility optional. This can save a little time when reading
within the same page and allows support for smaller devices that
don't support pages (example: chips containing EDID).
Change-Id: Ie48087caee40c11fa241d1555fce9309ddd27b43
This program uses the i2c /dev interface to read the
contents of EEPROMs and display it to the user in
HEX and ASCII. It also has a mode that can display
data in label:value pairs. That mode is used for
board detection in the rc script to start the right
i2c drivers for the board.
Change-Id: I0bf5b13ffab5a89533c762d6881a145cf7f14914
. let the dynamic linker use a real file mmap(), reverting
most of the minix-specific changes
. except for a fallback mode for systems or filesystems that
do not support mmap() on files
. make, grep: let them use mmap() too, with fallback
Change-Id: I11c0c9ad439d713917a6f5c2d196558f6c03eabd
. libc: add vfs_mmap, a way for vfs to initiate mmap()s.
This is a good special case to have as vfs is a slightly
different client from regular user processes. It doesn't do it
for itself, and has the dev & inode info already so the callback
to VFS for the lookup isn't necessary. So it has different info
to have to give to VM.
. libc: also add minix_mmap64() that accepts a 64-bit offset, even
though our off_t is still 32 bit now.
. On exec() time, try to mmap() in the executable if available.
(It is not yet available in this commit.)
. To support mmap(), add do_vm_call that allows VM to lookup
(to ino+dev), do i/o from and close FD's on behalf of other
processes.
Change-Id: I831551e45a6781c74313c450eb9c967a68505932
. prevents zombies from accumulating for as long as tcpd exists
for child processes that create their own process group, e.g. ftpd.
Change-Id: Ic56597810f7d17e1cc28b755e2d1998ecf49a27c
Primary purpose of change: to support the mmap implementation, VM must
know both (a) about some block metadata for FS cache blocks, i.e.
inode numbers and inode offsets where applicable; and (b) know about
*all* cache blocks, i.e. also of the FS primary caches and not just
the blocks that spill into the secondary one. This changes the
interface and VM data structures.
This change is only for the interface (libminixfs) and VM data
structures; the filesystem code is unmodified, so although the
secondary cache will be used as normal, blocks will not be annotated
with inode information until the FS is modified to provide this
information. Until it is modified, mmap of files will fail gracefully
on such filesystems.
This is indicated to VFS/VM by returning ENOSYS for REQ_PEEK.
Change-Id: I1d2df6c485e6c5e89eb28d9055076cc02629594e
With the addition of utimes(), we can remove the workarounds
and use the original NetBSD code for timestamping files.
Also restore use of -p & -r for install while building
Import the NetBSD rdate command and remove the Minix rdate command.
The default behaviour for both is the same. The NetBSD version adds
options to just display the time, adjust the time using adjtime(),
and set the time without printing the time.
Porting Notes:
- Compiles cleanly out of the box without any warnings
- Path changes from /usr/bin/rdate to /usr/sbin/rdate
- checked pkgsrc for any usages of rdate (none found)
- checked src for any usages of rdate (none found)
Testing:
- all command line options work (tested with time.nist.gov server)
- Native and cross build OK
Change-Id: I613449763891a896527f337999c006a970c3924c
This patch introduces a framebuffer to Minix. It's written for the ARM
port of Minix, but has an architectural split that separates the
hardware dependent part from the non-hardware dependent part. Futhermore,
this driver was developed using a screen that has a native resolution of
1024x600 pixels and having lack of support for obtaining EDID from the
screen. Consequently, it uses a hardcoded resolution of 1024x600.
The driver uses an interface based on the Linux ioctl API, but supports
only a very limited subset.
